Who we are and what we do -...
15
Who we are and what we do The story of the world’s leading manufacturer of axial impellers
Transcript of Who we are and what we do -...
Who we are and what we doThe story of the world’s leading manufacturer of axial impellers
02//03
04//05
06//07
08//09
10//11
12//13
14//15
16//17
18//25
26//27
OUR COMPANY
OUR MARKETS
OUR TECHNICAL SUPPORT
OUR WAY OF GUIDING YOU
OUR WIND TUNNEL
OUR R&D FACILITIES
OUR ONLINE SERVICE
OUR MODULAR PRODUCT SYSTEM
OUR PRODUCT RANGE
OUR PHILOSOPHY
OUR COMPANY
We know that to you, the impeller is probably just one of many components.
But then again, you know that the final result can never be any better than the
quality of every single component. Which is why you don’t want to compromise.
For 55 years Multi-Wing has been focused on just one thing: Axial impellers.
As leaders in our field, we’re well aware of the difference between being a
trusted partner and a subcontractor. It’s all about delivering the right product
at the right time – and at the right price. Not to mention the level of support
you can expect from an ISO 9001 : 2000 company.
Read on and you’ll see why no one in the market is capable of matching our
ability to optimize an impeller for your specific application. And guarantee you
consistent quality and delivery performance you can rely on.
More at multi-wing.com/company>
OUR MARKETS
In order to meet your specific needs, we’ve divided our know-how into three
different markets: Ventilation, including industrial ventilation and agricultural
ventilation. Cooling, including air-cooled condensers, cooling towers and
evaporators. And industrial heat exchangers, including engine cooling in
off-road equipment.
Being a truly global brand means that we can support your business no matter
where you are. Even better, we can provide you with the shortest possible
delivery time and the best possible local support. Our global presence even
has a positive effect on our prices.
More at multi-wing.com/markets>
04//05
OUR TECHNICAL SUPPORT
You’re not just looking for an impeller, you’re looking for an impeller for a
specific application. There’s a world of difference. With Multi-Wing at your
side you can be sure to get a solution that’s optimized for your exact needs.
How come?
It’s a matter of using the most advanced tools to be found in the business.
Read on and you’ll learn about Multi-Wing Designer, Multi-Wing Optimiser, the
Wind Tunnel and our other R&D Facilities. Combined, they’ll provide you with
a solution that is bound to enhance the performance of your application.
More at multi-wing.com/technicalsupport>
06//07
OUR WAY OF GUIDING YOU
Designing the perfect impeller is quite a process. But don’t worry, we’re here to
guide you through the different stages. In this respect you’ll find our impeller
selection programme very useful. Based on your application requirements the
Multi-Wing Optimiser will select the impeller best suited to meet the required
performance. It’ll also provide you with valuable mechanical information and
it even includes different simulation features and an extensive output menu.
All you have to do is download it from our site.
Multi-Wing Designer is another programme you’ll want to hear about.
It provides you with a customized drawing of any of the thousands of impeller
combinations available in the Multi-Wing system. Based on the drawing
programme Solid Works®, the Multi-Wing Designer enables you to make 2D
and 3D drawings swiftly and easily.
More at multi-wing.com/optimiser and multi-wing.com/designer>
08//09
OUR WIND TUNNEL
Ask any of our clients, and they’ll tell you that our wind tunnel is one of the
reasons for Multi-Wing being the first choice of engineers all over the world.
Why? Because not only has the tunnel enabled us to stay at the forefront of
impeller design and to develop the most comprehensive range of impellers
in the market. It also produces vital empirical data of extreme accuracy
and reliability.
Thanks to the tunnel, we can even offer to suggest improvements on your
own application. Not only can we qualify the precise airflow, we can also test
the impact on performance of construction changes to the impeller housing.
All you have to do is let us know.
More at multi-wing.com/windtunnel>
10//11
OUR R&D FACILITIES
We could spend hours telling you about our R&D facilities. How the Solid
Works® CAD and FEM software allows us to create impeller designs with
extremely high performance and reliability. And how the Rapid Prototyping
Machine allows us to improve already existing designs. By producing 3D
models in ABS plastic we can provide you with prototypes, make adjustments
and contribute to a better overall design.
The Finite Element Method predicts modal frequencies and stress loads
on fan blades and in hub plates. And the blasting station produces the
vital empirical data needed to predict stress loads on a complete impeller.
No wonder our impellers have gained the reputation of being so reliable.
More at multi-wing.com/rdfacilities>
12//13
OUR ONLINE SERVICE
Multi-Wing is a true online company. From start to finish, from identifying
the right impeller to the final order, you’ll be surprised how fast and easy our
online services make the process. Not to mention that day-to-day ordering is
made more effective and cost efficient.
You’ll enjoy our new user-friendly identification service. It takes you through
a series of questions that enables you to identify any given impeller or set
of blades. At the end of the session, you’ll receive a full description of the
impeller or the blades you have chosen.
More at multi-wing.com/onlineservice>
14//15
OUR MODULAR PRODUCT SYSTEM
The secret behind a Multi-Wing impeller is that it’s customized from
standardized components. That’s why we can offer you an individual solution
at off-the-shelf prices. You’ll find six overall product series differing in terms
of diameter ranges, pitch setting systems and blade profiles. They are all
comprised of hub parts, usually in aluminium, and a number of blades made
of either thermo-plastic or aluminium.
This modular system makes our product range extremely flexible in terms of
selecting the right impeller for the right job. It also allows us to offer you the
most cost-efficient solution.
More at multi-wing.com/products>
16//17
OUR PRODUCT RANGE 18//19
OUR Z SERIES 20//21
The Z series can be used in just about any air moving application.
The blades have adjustable pitches, while hub parts as well as fan blades
come in different designs and materials. The Z series is widely used in the
ventilation and cooling industry as well as in automotive applications where
environmental requirements are more demanding. It’s also a suitable solution
in applications that demand high performance in difficult flow conditions,
where there is less focus on power consumption. The Z series also features
reversible impellers designed specifically for drying applications.
More at multi-wing.com/zseries>
OUR H SERIES
The H series covers the smallest diameters in our range. Its compact but solid
design is well suited for a variety of applications. For engine and compressor
cooling this impeller type offers a flexible solution that will meet all
dimensioning criteria - especially when noise levels are critical. The H series
is also applicable to agricultural ventilation which calls for high performance
at low static pressure. For cooling applications, this type is often used in
evaporators and in smaller condensers.
More at multi-wing.com/hseries>
OUR G SERIES 22//23
The G series is the largest thermo plastic impeller in the world. The impeller
is specifically aimed at large-size cooling applications such as cooling towers
and condensers but can also be used for industrial heat exchangers.
More at multi-wing.com/gseries>
OUR W SERIES
The W series has fan blades with adjustable pitches and is available with
various types of profiles. Therefore it’s possible to select the right impeller
for almost any air moving application. The W series offers light but broad
blades designed for coil applications with low speed motors and moderate
power consumptions. And the W series is also well suited for high
performance air moving units such as mobile radiators and wood dryers.
More at multi-wing.com/wseries>
OUR D SERIES 24//25
The relatively small diameter and the broad, paddle-shaped profile of the
fan blades makes the D series ideal for smaller heat exchanger applications
such as oil coolers, air-cooled condensers and dry coolers. With fan blades
of glass reinforced polyamide it can be used in low temperature evaporator
applications as well. The D series provides a successful combination of high
airflow and high-pressure rates at low speeds and produces low noise levels.
The fact that it’s made up of a modest number of components makes it highly
cost-efficient.
More at multi-wing.com/dseries>
OUR M SERIES
The M series is engineered to meet the demands of smaller heat exchangers
such as oil coolers, air-cooled condensers and dry coolers. With fan blades of
glass reinforced polyamide this impeller can also be used in low temperature
evaporator applications. It provides high-pressure capability at low speeds
resulting in low noise levels in most compact heat exchangers. The one-piece
moulded design makes it highly price-competitive.
More at multi-wing.com/mseries>
DON’T COMPROMISEOUR PHILOSOPHY
