White Rail Motorized Curtain Track Ti-8040Ti-8040 FM remote-control receiver is build-in. Motorized...
Transcript of White Rail Motorized Curtain Track Ti-8040Ti-8040 FM remote-control receiver is build-in. Motorized...
Ti-8040
•FM remote-control receiver is build-in.
•Motorized curtain track with ultra-quiet operation.
•Automatically identifies and set Open and Stop operation limits.
•Manual-override (by hand-draw operation) is possible.
•Enables opening/closing of curtains without using any switch operations. (Touch Motion)
Motorized Curtain Track
Ti-8040
16201502E
Ti-8040 Parts
Product Name Product Code
Ti-8040 Motor Set
30006904
Motor Side Pulley
30006880
FM Remote-Control Transmitter (6 channels)
30006891
Product Name Product Code
Noiseless Roller
Pilot Roller
Joint Plate
04990011
30006882
04990006
04990007
Ceiling Single Bracket M
30006884
Master Roller Arm
End Side Pulley
30006881
Ti-8040 Rail
Size Product Code
5.00 m (197″)
White Rail
04990014
OT Splice
Product Name Product Code
Belt Joint
Belt Joint Cover
04990020
04990021
04990009
04990010
Drive Belt
30006883
04990013
Splice Pin
Pilot Roller Plate with Wheel
Stop
04990022
654321
2 3
Ti-8040 Ti-8040
Ti-8040’s Unique Features
The new motor utilises a built-in FM receiver for control.
Feature 1: A built-in FM Remoto-Control Receiver
The new motor and rollers provide ultra-quite operation. Feature 2: Quiet operation with a new motor and new rollers
L-shaped, U-shaped, S-shaped and gradual curves.Feature 3: Can be curved into a variety of shapes
A built-in electromagnetic clutch allows the drapery to be drawn by hand.Feature 4: Hand-draw operation as well as motor operation
The belt drive transmission system is highly durable. Feature 5: Highly durable belt drive transmission system
These functions enable the smooth start and stop of drapery operation.Feature 6: “Slow start” and “slow stop” functions
The touch motion function can perform opening/closing of curtains without using any switch. If curtain is drawn, it will begin to move in the direction itself, and will stop at the place on limit setup.
Feature 7: Touch motion function
Product Overall View and Names of Parts
Rail Cross Section Installation Dimensions
Color Materials/SpecificationsProduct NameMolded plastic
SteelAluminum
Molded plasticSteel
Molded plasticSteel, Molded plastic
Aluminum, molded plastic (case)Wire with plug (1 m/39″)
3-layer structure of steel wires, plastic and fiberWire
No.End Side Pulley
Ceiling Single Bracket MRail
Motor Side PulleyStop
Noiseless RollerPilot Roller Set
MotorElectric Cord with the ground
Drive BeltAntenna
WhiteWhiteWhiteWhite
MetallicNaturalMetallicWhiteWhiteGreenWhite
23.2 mm (.91″)
33.6 mm (1.3″)
Ti-8040
Pilot Roller with Arm Ceiling Single Bracket M
Product length (L)
53.5 mm (2.1″)
5.3 mm (.21″)
Product Size
29 mm
46 mm 34 mm
12 mm
10 mm 6 mm
15 mm
21.5 mm
18 mm
29 mm
46 mm 34 mm
12 mm
10 mm 6 mm
15 mm
21.5 mm
18 mm
FM Remote-Control Transmitter
Built-in FM receiver
Motor
Antenna
2 3
Ti-8040 Ti-8040
Ti-8040’s Unique Features
The new motor utilises a built-in FM receiver for control.
Feature 1: A built-in FM Remoto-Control Receiver
The new motor and rollers provide ultra-quite operation. Feature 2: Quiet operation with a new motor and new rollers
L-shaped, U-shaped, S-shaped and gradual curves.Feature 3: Can be curved into a variety of shapes
A built-in electromagnetic clutch allows the drapery to be drawn by hand.Feature 4: Hand-draw operation as well as motor operation
The belt drive transmission system is highly durable. Feature 5: Highly durable belt drive transmission system
These functions enable the smooth start and stop of drapery operation.Feature 6: “Slow start” and “slow stop” functions
The touch motion function can perform opening/closing of curtains without using any switch. If curtain is drawn, it will begin to move in the direction itself, and will stop at the place on limit setup.
Feature 7: Touch motion function
Product Overall View and Names of Parts
Rail Cross Section Installation Dimensions
Color Materials/SpecificationsProduct NameMolded plastic
SteelAluminum
Molded plasticSteel
Molded plasticSteel, Molded plastic
Aluminum, molded plastic (case)Wire with plug (1 m/39″)
3-layer structure of steel wires, plastic and fiberWire
No.End Side Pulley
Ceiling Single Bracket MRail
Motor Side PulleyStop
Noiseless RollerPilot Roller Set
MotorElectric Cord with the ground
Drive BeltAntenna
WhiteWhiteWhiteWhite
MetallicNaturalMetallicWhiteWhiteGreenWhite
23.2 mm (.91″)
33.6 mm (1.3″)
Ti-8040
Pilot Roller with Arm Ceiling Single Bracket M
Product length (L)
53.5 mm (2.1″)
5.3 mm (.21″)
Product Size
29 mm
46 mm 34 mm
12 mm
10 mm 6 mm
15 mm
21.5 mm
18 mm
29 mm
46 mm 34 mm
12 mm
10 mm 6 mm
15 mm
21.5 mm
18 mm
FM Remote-Control Transmitter
Built-in FM receiver
Motor
Antenna
4 5
Ti-8040Ti-8040
Product View and Specifications
Ti-8040 FM Remote-Control Transmitter
Motor Shaft
Fixing Lever
LED Indicator Lamp (red, green)
Power Supply Terminal
Motor Cord Terminal (one channel)
PG Button
Curtain Hook
Parts Name Parts NameSpecification Specification
Holder
Lithium Battery (CR2032)
DC3V (CR2032 X 1)
20 mA or lower
433.92 MHz
1–6 (ALL for 6 CH)
Source Voltage
Source Current
Wave Frequency
Number of Channel
-10–50ºC (Non-condensing)
30 m (varies depending on the condition)
W 42 mm X H 128 mm X D 13 mm
Approx. 58 g
Ambient Temperature
Reaching Distance
Product Size
Product Weight
Open Button
Stop Button
Close Button
Address No. Setting Button
Address No. LED Indicator Lamp ①②③④⑤⑥⑦
Rated power voltageRated power frequency
Power consumption
Operating voltageOperating currentPower ratingOperating speedRated currentAmbient temperatureTime ratingNoise level
AC 100 to 240 V50/60 HzDuring stand by: 2.5 W or lowerMax. load operation: 90 WDC 5 V5 mA0.6 A (AC 220 V), 1.4 A (AC 100 V)8 sec./m0.8 N.m0 to 50ºC (non-condensing)4 min. (continuous operation)40 dB (in default motor speed)
78 mm (3.1″)
53 mm (2.1″)
310 mm (12″)
13 mm (.51″)
18 mm (.71″)
60 mm (2.4″)
5.2 mm (.20″)
5.2 mm (.20″)
37.5 mm(1.5″)47.9 mm(1.9″)
47 mm (1.9″)
42 mm (1.7″)
128 mm (5.0″)
Top view
Front view
Bottom side view
Side view Back view Inside view
23 mm (.91″)
4 5
Ti-8040Ti-8040
Product View and Specifications
Ti-8040 FM Remote-Control Transmitter
Motor Shaft
Fixing Lever
LED Indicator Lamp (red, green)
Power Supply Terminal
Motor Cord Terminal (one channel)
PG Button
Curtain Hook
Parts Name Parts NameSpecification Specification
Holder
Lithium Battery (CR2032)
DC3V (CR2032 X 1)
20 mA or lower
433.92 MHz
1–6 (ALL for 6 CH)
Source Voltage
Source Current
Wave Frequency
Number of Channel
-10–50ºC (Non-condensing)
30 m (varies depending on the condition)
W 42 mm X H 128 mm X D 13 mm
Approx. 58 g
Ambient Temperature
Reaching Distance
Product Size
Product Weight
Open Button
Stop Button
Close Button
Address No. Setting Button
Address No. LED Indicator Lamp ①②③④⑤⑥⑦
Rated power voltageRated power frequency
Power consumption
Operating voltageOperating currentPower ratingOperating speedRated currentAmbient temperatureTime ratingNoise level
AC 100 to 240 V50/60 HzDuring stand by: 2.5 W or lowerMax. load operation: 90 WDC 5 V5 mA0.6 A (AC 220 V), 1.4 A (AC 100 V)8 sec./m0.8 N.m0 to 50ºC (non-condensing)4 min. (continuous operation)40 dB (in default motor speed)
78 mm (3.1″)
53 mm (2.1″)
310 mm (12″)
13 mm (.51″)
18 mm (.71″)
60 mm (2.4″)
5.2 mm (.20″)
5.2 mm (.20″)
37.5 mm(1.5″)47.9 mm(1.9″)
47 mm (1.9″)
42 mm (1.7″)
128 mm (5.0″)
Top view
Front view
Bottom side view
Side view Back view Inside view
23 mm (.91″)
76
Installation Dimensions and Diagram
Ti-8040Ti-8040
One-way draw: ceiling single attachment
Two-way draw: ceiling double attachment
Applicable Range
Specifications Product Length
Straight
Single Curve
Two Curves
OverallCurve Half
40 kg (88 lb)
40 kg (88 lb)[One-way Draw: 20 kg (44 lb)]
15 kg (33 lb)
15 kg (33 lb)
15 kg (33 lb)
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
With regular curve radius of 300R (11.8″R) or 400R (16″R), curve bending is available in the range of 90º to 179º.With regular curve radius of 300R (11.8″R) or 400R (16″R), curve bending is available in the range of 90º to 179º.Overall curve half is available with a curve radius of 1,000R (39″R) or more. The number of splice is one piece only, and two tracks need to be spliced in the center. A splice between two curves requires at least 400 mm (16″) of a straight portion, and a non-splice between two curves requires at least 200 mm (7.9″) of a straight portion.An allowable curtain load per roller is 1.5 kg (3.3 lb) or less.
*1*2*3*4
*5
Curtain Weight
*4
1,000–10,000 mm(39–394″)
1,200–10,000 mm(47–394″)
1,500–6,000 mm(59–236″)
1,000–6,000 mm(39–236″)
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
*5
*1
*2
*3
5.0 mm
53 mm
33.6 mm
134.3 mm
350 mm68 mm
5.3 mm23.2 mm
5.0 mm
60 mm
53.5 mm
130 mm 120 mm
125 mm
99.6 mm
(
B d c + 1
5.0 mm 5.0 mm
53 mm
33.6 mm
5.3 mm
130 mm 120 mm
99.6 mm
(
B d c + 1
50 mm
160 mm
220 mm
134.3 mm
350 mm68 mm
53.5 mm
M
1,000R (39″R) or more
M
90º or more(300R/11.8″R, 400R/16″R)
M 200 mm (7.9″)or more
•S-shaped
M200 mm (7.9″)or more
90º or more(300R/11.8″R, 400R/16″R)
•U-shaped
76
Installation Dimensions and Diagram
Ti-8040Ti-8040
One-way draw: ceiling single attachment
Two-way draw: ceiling double attachment
Applicable Range
Specifications Product Length
Straight
Single Curve
Two Curves
OverallCurve Half
40 kg (88 lb)
40 kg (88 lb)[One-way Draw: 20 kg (44 lb)]
15 kg (33 lb)
15 kg (33 lb)
15 kg (33 lb)
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
15 kg (33 lb)[One-way Draw: 7 kg (15.4 lb)]
With regular curve radius of 300R (11.8″R) or 400R (16″R), curve bending is available in the range of 90º to 179º.With regular curve radius of 300R (11.8″R) or 400R (16″R), curve bending is available in the range of 90º to 179º.Overall curve half is available with a curve radius of 1,000R (39″R) or more. The number of splice is one piece only, and two tracks need to be spliced in the center. A splice between two curves requires at least 400 mm (16″) of a straight portion, and a non-splice between two curves requires at least 200 mm (7.9″) of a straight portion.An allowable curtain load per roller is 1.5 kg (3.3 lb) or less.
*1*2*3*4
*5
Curtain Weight
*4
1,000–10,000 mm(39–394″)
1,200–10,000 mm(47–394″)
1,500–6,000 mm(59–236″)
1,000–6,000 mm(39–236″)
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
One-way Draw
Two-way Draw
*5
*1
*2
*3
5.0 mm
53 mm
33.6 mm
134.3 mm
350 mm68 mm
5.3 mm23.2 mm
5.0 mm
60 mm
53.5 mm
130 mm 120 mm
125 mm
99.6 mm
(
B d c + 1
5.0 mm 5.0 mm
53 mm
33.6 mm
5.3 mm
130 mm 120 mm
99.6 mm
(
B d c + 1
50 mm
160 mm
220 mm
134.3 mm
350 mm68 mm
53.5 mm
M
1,000R (39″R) or more
M
90º or more(300R/11.8″R, 400R/16″R)
M 200 mm (7.9″)or more
•S-shaped
M200 mm (7.9″)or more
90º or more(300R/11.8″R, 400R/16″R)
•U-shaped
98
5.0 mm 130 mm
130 mm 99.6 mm
Window side
Room side
Roomside
Windowside
Curtain box (Separate work
Box width = Produc + 1
5.0 mm120 mm
160 mm
110 mm
53 mm
33.6 mm
5.3 mm23.2 mm
68 mm350 mm
53.5 mm
Window side
Room side
Curtain box (Separate work)
130 mm 165 mm
5.0 mm
90º
R 300
50 mm
120 mm
120 mm 99.6 mm
Roomside
Windowside
53 mm
33.6 mm
5.3 mm
350 mm
53.5 mm
Window side
Room side
Curtain box (Separate work)
130 mm 5.0 mm
90º
90º
165 mm R 300
50 mm
50 mm
100 mm
120 mm 99.6 mm
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
R 40
0
Ti-8040Ti-8040
Single curve: ceiling single attachment
Single curve: ceiling double attachment
Two-way draw: ceiling single attachment (Overlap rail)
Two-way draw: ceiling double attachment (Room side: Overlap with two rails, Window side: Master roller)
130 mm 130 mm
Window side
Room side
Roomside
Windowside
Box width = Produc + 1
99.6 mm
5.0 mm
5.0 mm
120 mm
53 mm
33.6 mm
5.3 mm23.2 mm
Curtain box (Separate work
68 mm350 mm
53.5 mm
98
5.0 mm 130 mm
130 mm 99.6 mm
Window side
Room side
Roomside
Windowside
Curtain box (Separate work
Box width = Produc + 1
5.0 mm120 mm
160 mm
110 mm
53 mm
33.6 mm
5.3 mm23.2 mm
68 mm350 mm
53.5 mm
Window side
Room side
Curtain box (Separate work)
130 mm 165 mm
5.0 mm
90º
R 300
50 mm
120 mm
120 mm 99.6 mm
Roomside
Windowside
53 mm
33.6 mm
5.3 mm
350 mm
53.5 mm
Window side
Room side
Curtain box (Separate work)
130 mm 5.0 mm
90º
90º
165 mm R 300
50 mm
50 mm
100 mm
120 mm 99.6 mm
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
R 40
0
Ti-8040Ti-8040
Single curve: ceiling single attachment
Single curve: ceiling double attachment
Two-way draw: ceiling single attachment (Overlap rail)
Two-way draw: ceiling double attachment (Room side: Overlap with two rails, Window side: Master roller)
130 mm 130 mm
Window side
Room side
Roomside
Windowside
Box width = Produc + 1
99.6 mm
5.0 mm
5.0 mm
120 mm
53 mm
33.6 mm
5.3 mm23.2 mm
Curtain box (Separate work
68 mm350 mm
53.5 mm
1110
Window side
Room side
Roomside
Windowside
(
5.0 mm 5.0 mm
55 mm130 mm 120 mm
125 mm
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
99.6 mm
R 10
00
Window side
Room side
R 300R
300
R 30
0
R 300
Roomside
Windowside
53 mm
55 mm
350 mm
33.6 mm
(
130 mm
50 mm
50 mm99.6 mm
130 mm
120 mm
99.6 mm
90 mm
125 mm270 mm
55 mm
270 mm
205 mm
Ti-8040Ti-8040
Two curves (S-shaped): ceiling single attachment
Overall curve: ceiling single attachment
Two curves: ceiling single attachment
Two curves: ceiling single attachment(Room side: Overlap with two rails, Window side: Master roller)
Window side Room side
90º
90º
165 mm
165 mm
R 300
R 300
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
Straight-line portion
or more
Curtain box (Separate work
120 mm
140 mm
130 mm
70 mm
140 mm70 mm
99.6 mm
5.0 mm
5.0 mm
Window side
Room side
90º90º
165 mm165 mm
R 300R 300
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
(
60 mm
120 mm
130 mm
130 mm 99.6 mm
1110
Window side
Room side
Roomside
Windowside
(
5.0 mm 5.0 mm
55 mm130 mm 120 mm
125 mm
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
99.6 mm
R 10
00
Window side
Room side
R 300
R 30
0
R 30
0
R 300
Roomside
Windowside
53 mm
55 mm
350 mm
33.6 mm
(
130 mm
50 mm
50 mm99.6 mm
130 mm
120 mm
99.6 mm
90 mm
125 mm270 mm
55 mm
270 mm
205 mm
Ti-8040Ti-8040
Two curves (S-shaped): ceiling single attachment
Overall curve: ceiling single attachment
Two curves: ceiling single attachment
Two curves: ceiling single attachment(Room side: Overlap with two rails, Window side: Master roller)
Window side Room side
90º
90º
165 mm
165 mm
R 300
R 300
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
Straight-line portion
or more
Curtain box (Separate work
120 mm
140 mm
130 mm
70 mm
140 mm70 mm
99.6 mm
5.0 mm
5.0 mm
Window side
Room side
90º90º
165 mm165 mm
R 300R 300
Roomside
Windowside
53 mm
350 mm
33.6 mm
5.3 mm53.5 mm
(
60 mm
120 mm
130 mm
130 mm 99.6 mm
1312
Explanatory notes: Power supply, Low voltage control line, Main body attachment or TOSO standard
Ti-8040Ti-8040
Overall curve half: ceiling double attachment(Room side: Overlap with two rails, Window side: Master roller)
Basic Wiring and Connecting Diagram
Basic Wiring Diagram
Junction box DC 24 V
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Junction box
Power sourceAC 100–240 V 50/60Hz
Earth Ground
E
Modular Cablewith terminal block
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
Single Operation
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
Junction box DC 24 V
AC 100–240 V
DC 24 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Junction box
Power sourceAC 100–240 V 50/60Hz
EarthGround
E
Modular Cablewith terminal block
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
3-button momentarycontact switch
Basic Wiring Diagram
Operation from Two Locations
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
3-button momentarycontact switch
Window side
Room side
Roomside
Windowside
Curtain box (Separate work)
350 mm
33.6 mm
5.3 mm 53.5 mm
R 1160
R 10605.0 mm
130 mm
50 mm
330 mm
100 mm
60 mm
or less
5.0 mm
120 mm
R 10
00
Ti-8040
Ti-8040 Ti-8040
Ti-8040
L4 L2 L1 L3
L4 L2 L1 L3
1312
Explanatory notes: Power supply, Low voltage control line, Main body attachment or TOSO standard
Ti-8040Ti-8040
Overall curve half: ceiling double attachment(Room side: Overlap with two rails, Window side: Master roller)
Basic Wiring and Connecting Diagram
Basic Wiring Diagram
Junction box DC 24 V
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Junction box
Power sourceAC 100–240 V 50/60Hz
Earth Ground
E
Modular Cablewith terminal block
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
Single Operation
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
Junction box DC 24 V
AC 100–240 V
DC 24 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Junction box
Power sourceAC 100–240 V 50/60Hz
EarthGround
E
Modular Cablewith terminal block
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
3-button momentarycontact switch
Basic Wiring Diagram
Operation from Two Locations
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
3-button momentarycontact switch
Window side
Room side
Roomside
Windowside
Curtain box (Separate work)
350 mm
33.6 mm
5.3 mm 53.5 mm
R 1160
R 1060
5.0 mm
130 mm
50 mm
330 mm
100 mm
60 mm
or less
5.0 mm
120 mm
R 10
00
Ti-8040
Ti-8040 Ti-8040
Ti-8040
L4 L2 L1 L3
L4 L2 L1 L3
1514
Ti-8040 Ti-8040 Ti-8040
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter 2.4G
FM Remote-ControlReceiver 2.4G
Ti-8040Ti-8040
Basic Connecting Diagram
Junction box DC 24 VDC 24 VDC 24 V
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
E
Modular Cablewith terminal block
Junction box
AC 100–240 V
E
Modular Cablewith terminal block
Junction box
AC 100–240 V
E
Modular Cablewith terminal block
Basic Wiring Diagram
Simultaneous Operation
Junction box
Power sourceAC 100–240 V 50/60Hz
EarthGround
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
Junction box
E
Modular Cablewith terminal block
Junction box
E
Modular Cablewith terminal block
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
Ti-8040 Ti-8040 Ti-8040
Explanatory notes: Power supply, Main body attachment or TOSO standard
Basic Wiring Diagram
Earth Ground
E
EE
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Built-in Receiver
AC 100–240 V
E
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter
Ti-8040
Ti-8040 Ti-8040
Ti-8040
L4 L2 L1 L3 L4 L2 L1 L3 L4 L2 L1 L3
FM Remote-Control Transmitter
Explanatory notes: Power supply, Low voltage control line, Main body attachment or TOSO standard
FM Remote-Control Receiver 2.4G(Can operate with other TOSO motorized products by using FM Remote-Control 2.4G)
FM Remote-Controlconnector
Non voltage type
FM Remote-Control connector Non voltage type
L4 L2 L1 L3
Red (OPEN)
Black (STOP)
Green (CLOSE)
White (COMMON)
Basic Wiring Diagram
EarthGround
Basic Connecting Diagram
Power sourceAC 100–240 V 50/60Hz
EarthGround
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter 2.4G
FM Remote-ControlReceiver 2.4G
1514
Ti-8040 Ti-8040 Ti-8040
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter 2.4G
FM Remote-ControlReceiver 2.4G
Ti-8040Ti-8040
Basic Connecting Diagram
Junction box DC 24 VDC 24 VDC 24 V
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
E
Modular Cablewith terminal block
Junction box
AC 100–240 V
E
Modular Cablewith terminal block
Junction box
AC 100–240 V
E
Modular Cablewith terminal block
Basic Wiring Diagram
Simultaneous Operation
Junction box
Power sourceAC 100–240 V 50/60Hz
EarthGround
E
Modular Cablewith terminal block
3-button momentarycontact switch
OPEN
STOP
CLOSE
COMMON
Junction box
E
Modular Cablewith terminal block
Junction box
E
Modular Cablewith terminal block
Switch SpecificationOpen: Stop: Close: *Dry Contact Switching
A contactA contactA contact
3-button momentarycontact switch
Ti-8040 Ti-8040 Ti-8040
Explanatory notes: Power supply, Main body attachment or TOSO standard
Basic Wiring Diagram
Earth Ground
E
EE
AC 100–240 V
Power sourceAC 100–240 V 50/60Hz
Basic Connecting Diagram
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Built-in Receiver
AC 100–240 V
E
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter
Ti-8040
Ti-8040 Ti-8040
Ti-8040
L4 L2 L1 L3 L4 L2 L1 L3 L4 L2 L1 L3
FM Remote-Control Transmitter
Explanatory notes: Power supply, Low voltage control line, Main body attachment or TOSO standard
FM Remote-Control Receiver 2.4G(Can operate with other TOSO motorized products by using FM Remote-Control 2.4G)
FM Remote-Controlconnector
Non voltage type
FM Remote-Control connector Non voltage type
L4 L2 L1 L3
Red (OPEN)
Black (STOP)
Green (CLOSE)
White (COMMON)
Basic Wiring Diagram
EarthGround
Basic Connecting Diagram
Power sourceAC 100–240 V 50/60Hz
EarthGround
Power sourceAC 100–240 V 50/60Hz
FM Remote-Control Transmitter 2.4G
FM Remote-ControlReceiver 2.4G
Ti-8040
•FM remote-control receiver is build-in.
•Motorized curtain track with ultra-quiet operation.
•Automatically identifies and set Open and Stop operation limits.
•Manual-override (by hand-draw operation) is possible.
•Enables opening/closing of curtains without using any switch operations. (Touch Motion)
Motorized Curtain Track
Ti-8040
16201502E
Ti-8040 Parts
Product Name Product Code
Ti-8040 Motor Set
30006904
Motor Side Pulley
30006880
FM Remote-Control Transmitter (6 channels)
30006891
Product Name Product Code
Noiseless Roller
Pilot Roller
Joint Plate
04990011
30006882
04990006
04990007
Ceiling Single Bracket M
30006884
Master Roller Arm
End Side Pulley
30006881
Ti-8040 Rail
Size Product Code
5.00 m (197″)
White Rail
04990014
OT Splice
Product Name Product Code
Belt Joint
Belt Joint Cover
04990020
04990021
04990009
04990010
Drive Belt
30006883
04990013
Splice Pin
Pilot Roller Plate with Wheel
Stop
04990022
654321