White knight Plus Intro slides
-
Upload
lawrence-stone -
Category
Engineering
-
view
191 -
download
8
Transcript of White knight Plus Intro slides
Garland’s White-Knight® Plus/White-Stallion® Plus
System
Features & Benefits
• Chemically Engineered Reinforcement– The Polymers Incorporated in this High Strength
Urethane Give it 2400 psi./in. of Tensile Strength• Multi-Surface Restoration
– White-Knight Plus/ White-Stallion Plus Can be Used to Coat an Entire Aged Single-Ply, Metal, Smooth BUR and Modified Bitumen Roof System
• Reduced Application Labor– Eliminating the Need for Secondary Embedded
Reinforcements Drastically Reduces Labor and Application Time
Surface Preparation• The Surface Must be Clean, Sound, Dry
and Free of Any Materials That Would Inhibit Proper Adhesion of The Coating
• To Achieve a Suitable Surface, Prior to the Application of the Coating, the Use of Industrial Cleaner, Scraping, Power Booming, Vacuuming or Other Means May be Required
• Cleaning Should Always be Performed Observing Responsible Trade Practices and Cleaner Residue From Incomplete Rinsing of Low Lying Areas Should Be Avoided
• In Any Case, Any Existence of Talc or Other Separator Agents on the Roofing Surface is Not Acceptable
White-Knight Plus/ White-Stallion Plus Base Coat• Benefits of White-Knight Plus/ White-Stallion
Plus Base Coat– Tinted Base Coat
• Ensures Contractor Applies Coating at Proper Coverage Rates by Visually Identifying Where the Finish Coat Needs to be Applied Heavier
White-Knight Plus/ White-Stallion Plus• Benefits of White-Knight
Plus/ White-Stallion Plus– Cool Roof Coatings
• Help Reduce Building Energy Costs
• Provides UV Protection for Membrane System
• Extends the Life Cycle of the Waterproofing Membrane
– Extreme Performance• 2400 psi Tensile Strength• 340% Elongation• 0.87 Initial Reflectance• 0.89 Initial Emittance• SRI 110 (LEED Standard 78)
Application Excellence
• SinglePly
Single-Ply Application Rates
• White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) (32 Wet Mils) Over All Seams, Flashings and Penetrations
• White-Knight Plus at 2 Gallons Per Square (0.84 l/m2)(32 Wet Mils) Over Entire Roof
White-Knight Plus/ White-Stallion Plus Over Single-Ply EPDM, PVC, TPO and CSPE
Top Coat Application Finished Roof
Power Wash Make Necessary Repairs
Application Excellence
• Modified Bitumen
BUR & Modified Bitumen Application Rates• All-Knight Primer at ½
Gallon Per Square (0.21 l/m2) 8 Wet Mils – Only Needed on New
Systems• White-Knight Plus Base
Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils
• White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils
White-Knight Plus/ White-Stallion Plus Over BUR & Modified
Mineral Modified Completed System
Application Excellence
• Metal
White-Knight Plus/ White-Stallion Plus Application Rates• Prime Metal
– Always Perform an Adhesion Test on Metal
• White-Knight Plus Base Coat at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over All Seams, Flashings, Fasteners and Penetrations
• White-Knight Plus at 2 Gallons Per Square (0.81 l/m2) 32 Wet Mils Over Entire Roof
White-Knight Plus/ White-Stallion Plus Over Metal
Base Coat Seams & Fasteners
Prime Roof SystemPower Wash
Top Coat Application
Finished Roof
Text Slide
• Text– Text
• Text
Summary• White-Knight Plus/ White-Stallion Plus is a Urethane Based
Roof Coating Designed to Improve the Life Cycle and the Energy Efficiency of Your Roof By Reflecting the Sun’s Harmful Rays as Well as Adding Waterproofing Protection to Your System
• These Systems Provide a White ENERGY STAR®, Title 24, LEED®, and CRRC Rated, Reflective Surface
• These Systems Can Save Your Customer Money by Reducing the Building’s Operational Energy Costs as Well as Their Maintenance Costs
• These Systems Will Extend the Life of Your Roofing System by Reducing The UV Degradation of Your Membrane