Whether you call it Gap & Flush, Size & Form, Gap & Fair ... 241 Brochure.pdfCustom tips,...
2
241 S ERIES Fixture Flush & Gap Gauge Features: • Decrease inspection time: Simultaneously measure gap and flush • Durable construction • Repeatable using the LMI 776 Mounting Block on checking fixtures with Gauge R&R less than 5% • Easy to use • Reduce fixture cost by eliminating swing templates • Point tip and blade tip available • Easily connected to industry standard data collectors • Industry standard for simultaneously measuring flush and gap on checking fixtures for sheet metal, glass and plastic • 1 year warranty • An LMI 6025 6pin to 6pin coil cable is included with each LMI 241 Specifications: • Accuracy: 30μm • Measurement travel 10.0mm flush and gap • Spring force 85 g (3.0 oz) @ nominal position The patented fixture attachment method uses a rail mounted block (LMI 776) that locates the gauge in the same spot for every part. The LMI 241 uses a friction pad to hold the gauge securely in place while the check is being made. This feature eliminates the human error that is normally associated with a hand held measurement device. The small, low profile LMI 776 block easily mounts to the check fixture and eliminates the need for expensive swing templates in order to get parts in and out. Custom tips, non-marring contact tips, custom spring forces and other modification are available. 776 Mounting Block 241 Flush & Gap Gauge 241-B Flush & Gap Gauge with Blade Tip BEST ON THE BLOCK BEST ON THE BLOCK Whether you call it Gap & Flush, Size & Form, Gap & Fair, Gap & Step or Gap & Mismatch, the LMI 241 Gauge will cut your inspection time in half while maintaining superior accuracy and repeatability. The LMI 241 gauge incorporates the same durable construction and solid state electronics that LMI is known for. An all aluminum housing protects the precision bearings and electronics while the contact portions of the gauge are made from hardened tool steel. All the components were designed to withstand the toughest manufacturing environments while still maintaining MAXIMUM accuracy. The patented locating and friction locking mechanism ensures Gauge R & R’s of less that 5%. The gauge interfaces directly to most data collectors where the readings can be displayed and stored.
-
Upload
hoangquynh -
Category
Documents
-
view
219 -
download
4
Transcript of Whether you call it Gap & Flush, Size & Form, Gap & Fair ... 241 Brochure.pdfCustom tips,...
241SERIESFixture Flush & Gap Gauge
Features:•Decrease inspection time: Simultaneously measure gap and flush•Durable construction•Repeatable using the LMI 776 Mounting Block on checking
fixtures with Gauge R&R less than 5%•Easy to use •Reduce fixture cost by eliminating swing templates•Point tip and blade tip available•Easily connected to industry standard data collectors•Industry standard for simultaneously measuring flush and gap on
checking fixtures for sheet metal, glass and plastic•1 year warranty•An LMI 6025 6pin to 6pin coil cable is included with each LMI 241
Specifications:•Accuracy: 30μm•Measurement travel 10.0mm flush and gap•Spring force 85 g (3.0 oz) @ nominal position
The patented fixture attachment method uses a rail mounted block (LMI776) that locates the gauge in the same spot for every part. The LMI 241uses a friction pad to hold the gauge securely in place while the check isbeing made. This feature eliminates the human error that is normallyassociated with a hand held measurement device. The small, low profile LMI 776 block easily mounts to the check fixture and eliminates the needfor expensive swing templates in order to get parts in and out.
Custom tips, non-marring contact tips, custom spring forces and othermodification are available.
776 Mounting Block
241 Flush & Gap Gauge
241-B Flush & Gap Gaugewith Blade Tip
BEST ON THE BLOCKBEST ON THE BLOCKWhether you call it Gap & Flush, Size & Form, Gap & Fair, Gap & Step or Gap &Mismatch, the LMI 241 Gauge will cut your inspection time in half whilemaintaining superior accuracy and repeatability. The LMI 241 gaugeincorporates the same durable construction and solid state electronics that LMI isknown for. An all aluminum housing protects the precision bearings and electronicswhile the contact portions of the gauge are made from hardened tool steel. All thecomponents were designed to withstand the toughest manufacturing environmentswhile still maintaining MAXIMUM accuracy. The patented locating and frictionlocking mechanism ensures Gauge R & R’s of less that 5%. The gauge interfacesdirectly to most data collectors where the readings can be displayed and stored.
101 N. Alloy Drive, Fenton, MI 48430Phone: 810.714.5811 Fax: 810.714.5711Email: [email protected] our website: www.lmicorporation.com
Accessories241SERIES
Fixture Flush & Gap Gauge
Q U I C K & A C C U R A T E M E A S U R E M E N T S
720-D Master BlockA master block is required forthe LMI 241 in order to set the“zero” or nominal referenceposition for both the flush andthe gap positions. The LMI 720-D has a 3.0 and6.0mm gap in order to zero orverify gauge accuracy as well a0.0 and 2.0 mm flush reference.
776 Mounting BlockThe patented LMI 776 MountingBlock is designed for optimumand precise check point locationwhen positioning the LMI 241Gauge. The LMI 241 mounts inthe LMI 776 locating hole and is self-locking for accuracy andrepeatability. The LMI 776comes with mounting screwsand roll pins.
049 Tooling AidThe LMI 049 Tooling Aid assistin locating the LMI 776Mounting Block on the fixtureand certifying the position.
