What factors affect the cost of an injection mold in China?
-
Upload
huy-bui-van -
Category
Automotive
-
view
238 -
download
0
Transcript of What factors affect the cost of an injection mold in China?
Your One-Stop Plastics Solution Provider
What factors affect the cost of an injection mold in China?
When you are looking for an plastic injection mold supplier in China , you may be
wondering: “What factors affect the price of the mold? “Or "How to get molds with
lower prices in China?”
Of course, we all understand that the price of a product always depends on many
factors. And there is no exception for injection mold. A mold can cost from several
thousand to hundreds of thousands of dollars, and the most important factors that
affect the price of the mold are the complexity of the part that will be produced from
the mold, the size and the number of cavities. In addition, we also need to consider
more about some other factors such as the injection system (Hot Runner or Cold
Runner), geographic location of suppliers, or some other requests...
www.bluestar-mould.com
Your One-Stop Plastics Solution Provider
We are all clear that if a mold has higher levels of complexity, larger size, it will
have a higher price for processing than simpler and smaller-sized molds. Besides,
the number of cavities that you want will also affect the cost of the mold. Multiple
cavities, the mold will be larger, and need more materials, or processing will also take
more time and fee.
That's not to mention Mold Base Standard that you requeste or mold
suppliersuggest. If you do not give specific requirements for Mold Base Standard,
when you compare the price of the suppliers you should also pay attention to this.
Also,type of steel that is used to make the mold also affects the cost. So, if you want
a good standard mold, high quality, it is clear that the cost will be higher, which also
means that will help you get high quality products, less faulty in the manufacturing
process, and the mold life will also be higher.
www.bluestar-mould.com
Your One-Stop Plastics Solution Provider
A feature that cannot be produced from the mold in the straight open and shut
direction will require a moving part added to the tool. Some of these moving sections
are referred to as sliders, collapsible cores, and unscrewing molds. Each of
these moving parts makes the tool bigger or more complicated, of course, that will
require more work and ultimately increase the cost.
Using Hot Runner or Cold Runner in Injection system will also affect the price of
a mold. Obviously we all know that Hot Runner is different from Cold Runner, and the
cost is also different.
Another factor that we also need to pay attention to is the surface finish. If the
surface finish is not critical then a machined finish may be acceptable — this does
not require secondary finishing thus reducing the time and cost to produce the tool.
Hand polishing takes time and effort and has to be built into the cost of the tool.
There is a factor that many people do not pay enough attentiont to is the geographic
location of mold suppliers in China. Why should we pay any attention to this?
First, in China, the average wage in the different regions will vary, and this will affect
www.bluestar-mould.com
Your One-Stop Plastics Solution Provider
the Labor cost which is also added into the mold's price. In addition, the transport by
sea would help you save costs significantly, so if your supplier is near to shipping
ports, the transportation will get easier and less cost.
According to an evaluation, choosing to buy tools manufactured in China will help
you save cost up to "40% compared with a typical tool price from Europe or the
USA". However, you should also consider the expenses of travelling to the factory
to ensure tools are built correctly. Of course, there is another choice for that is to
choose third party company, which can help you audit the process and inspect
tooling.
Looking forward to hearing your opinions!
www.bluestar-mould.com