RZ5-2500DSPBRZ4-2000DSPB

DSP Class D Full Range Amplifiers

RZ4-2000DSPB

RZ4-2000DSPB

*190w x 4 @ 4 ohm*250w x 4 @ 2 ohm*500w x 2 @ 4 ohm Bridged*4CH input 5CH output DSP*PC/Apple/Android software*Time adjustment*10 bands equalizer*8ga Direct Connect Speaker Wire Terminals

*100w x 4 + 400w x 1 @ 4 ohm*150w x 4 + 600w x 1 @ 2 ohm*300w x 2 + 600w x 1 @ 4 ohm Bridged*2,500w MAX Power*4CH input 5CH output DSP*PC/Apple/Android software*Time adjustment*10 bands equalizer*8ga Direct Connect Speaker Wire Terminals

RZ4-2000DSPB RZ5-2500DSPB

RZ5-2500DSPB

RZ4-2000DSPB RZ5-2500DSPB

RZ4-2000DSPB

RZ5-2500DSPB

Speaker Connection

USB Slot

RCA AUDIO Output Connection

Connect the amplifier to PC through this port. After using a cable to connect the amplifier to a Windows PC, adjust the EQ, time delay, etc in the software.

Using high quality shiedled stereo RCA cables, connect this amplifier to another mono block amplifier. Control the mono block amplifier through software as well.

Auto Turn On ModeHost: When signal from high level input, the product automatic turn on. ACC: When signal from REM, the product automatic turn on.

RZ4-2000DSPB

6

3 4 51 2

USB Slot

Bass Boost and REM

Connect the amplifier to PC through this port. After using a cable to connect the amplifier to a Windows PC, adjust the EQ, time delay, etc in the software.

Ajust the amplifiers 45Hz Bass Boost level up to 12dB. REM to start the amplifier by signals.

Auto Turn On ModeHost: When signal from high level input, the product automatic turn on. ACC: When signal from REM, the product automatic turn on.

RZ4-2000DSPB

6

51 2 43

Software Control

2

1

3

4 5 6

1. Setting MenuMine: Laguage setting, reset DSP amplifierSAVE: Save the settings. 15 modes setting in this device.OPEN: Open the saved settings from DSP or PC. 2. 10 bands Equalizer:Equalizer, respectively parametric equalization and icon equlizatioin optional. The adjustable items of the parameter balance are frequency, Q value, gain. Iconically adjustable items are: gain. 3. High and Low Pass FilterType: Butter Worth/ Bessel/ Link Rill option. Slope: 6dB / 12dB / 18dB / 24dB / 30dB per Oct4. Time delayCan be measured by ms or cmMs: From 0.000 to 5.396ms, each step is 0.021msCM: From 1 to 187cm, each step is 1cm5. Channel Editing Including volume, phase, mute and synchronize two channels Synchronize two channel, from left to right or from right to left. 6. Main volume

iOS & Android Software Control

Main Volume

Time Delay Setting

Phase, Each Channel Volume, Mute

Crossover Setting

Equalizer Setting