WFA Hose Fittings

46

Click here to load reader

description

WFA Hose Fittings

Transcript of WFA Hose Fittings

Page 1: WFA Hose Fittings

Hose Fittings: IntroductionWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Hydraulic Hose Fittings - Introduction

These hose fittings are offered to create hydraulic hose assemblies with British Standard Pipe (BSP) or Metric end connections.The fittings are a two piece design, with separate hose collars and stems. The stems are common for all hose types, and thecollars used are specific by hose type (except in the case of multi-spiral inserts). The following types of hose can be used withthese fittings (with the appropriate collars):SAE 100R1A - (Skive) SAE 100R7 - (Thermoplastic)SAE 100R1AT - (No Skive) SAE 100R8 - (Thermoplastic)SAE 100R2 - (Skive) SAE 100 R12 - (Skive) SAE 100R2AT - (No Skive) The hose fittings listed in this section are stocked in plated steel only. Fittings in stainless steel are available on request. Forstainless steel, add -SS to the part numbers in this section.

Connections to Metric Tubing and Tube Fittings: The hose fittings for connection to metric tubing or DIN 2353 tubefittings are listed by the fitting thread size. The following chart lists the thread sizes corresponding to metric tube sizes.

Tube Size Series Thread Size Tube Size Series Thread Size

4mm 4-LL 8x1 14mm 14-S 22x1.55mm 5-LL 10x1 15mm 15-L 22x1.56mm 6-LL 10x1 16mm 16-S 24x1.56mm 6-L 12x1.5 18mm 18-L 26x1.56mm 6-S 14x1.5 20mm 20-S 27x28mm 8-LL 12x1 22mm 22-L 30x28mm 8-L 14x1.5 25mm 25-S 36x28mm 8-S 16x.15 28mm 28-L 36x2

10mm 10-L 16x1.5 30mm 30-S 42x210mm 10-S 18x1.5 35mm 35-L 45x212mm 12-L 18x1.5 38mm 38-S 52x212mm 12-S 20x1.5 42mm 42-L 52x2

Connections Using British Standard Pipe (BSP) ThreadsBritish Standard Pipe is most commonly used as British Standard Pipe Parallel (BSPP), sealed with a 60E cone seat (solid malethread, swivel female thread). The BSPP male threads may also be used in ports, using a rubber or copper washer seal. BSPflat face is BSPP thread with a flat surface at the nose of the thread for sealing. This is most commonly used on HIAB equipment.BSP male threads may also be tapered (BSPT), and can be used in either BSPP female or BSPT female ports with a suitablethread sealant. BSPT is commonly used on Japanese equipment and is part of the JIS standard. BSP thread sizes are listed inthe following table:

Dash Size Nominal Thread Thread O.D. Dash Size Nominal Thread Thread O.D.-02 1/8 - 28 0.383 -12 3/4 - 14 1.041-04 1/4 - 19 0.518 -16 1 - 11 1.309-06 3/8 - 19 0.656 -20 1 1/4 - 11 1.650-08 ½ - 14 0.825 -24 1 ½ - 11 1.882-10 5/8 - 14 0.930 -32 2 - 11 2.347

Standard Hose Fittings, Hose and Hose AssembliesWe carry the Gates line of hose and hose couplings and can provide loose couplings, hose or complete assemblies as required.Hoses range from general purpose to hydraulic, in sizes from 3/16" to 2" and pressures up to 10,000 psi. For more information,please see the Gates catalogue.

Custom Hose StemsHose stems may be manufactured by Williams Fluidair for most requirements. We have CNC controlled equipment, canmanufacture fittings to your drawings and provide design and manufacture services.

Page 2: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

M E T R I C H Y D R A U L I C H O S E F I T T I N G S

B R I T I S H S T A N D A R D P I P E (B S P)

Crimp FerrulesSkive - No Skive

Page 1

British Standard Pipe(BSP) Male 60° Cone

Page 2

British Standard Pipe(BSP) Male Flat Seat

Page 2

British Standard PipeMale Tapered (BSPT)

Page 2

British Standard Pipe(BSP) Swivel Female

Page 3

British Standard Pipe(BSP) Swivel Female

Flat SeatPage 3

British Standard Pipe(BSP) Swivel Female

45° ElbowPage 4

British Standard Pipe(BSP) Swivel Female

90° ElbowPage 4

British Standard Pipe(BSP) Female Swivel

with O-ringPage 5

British Standard Pipe(BSP) Swivel Female45° Elbow with O-ring

Page 5

British Standard Pipe(BSP) Swivel Female90° Elbow with O-ring

Page 5

D I N 2 3 5 3 M E T R I C : L - S E R I E S

Metric StandpipeStraightPage 6

Metric Standpipe45° Elbow

Page 6

Metric Standpipe90° Elbow

Page 6

Metric MaleL-SeriesPage 7

Female Swivel L-Series

with O-ringPage 7

Female SwivelL-Series

45° Elbow with O-ringPage 7

Female SwivelL-Series

90° Elbow with O-ringPage 7

Page 3: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

D I N 2 3 5 3 M E T R I C : S - S E R I E S

Metric MaleS-SeriesPage 8

Female Swivel S-Series

with O-ringPage 8

Female SwivelS-Series

45° Elbow with O-ringPage 8

Female SwivelS-Series

90° Elbow with O-ringPage 8

J I S S T A N D A R D M E T R I C

Japanese Standard(JIS) Metric Male

Page 9

Japanese Standard(JIS) Female Swivel

Page 9

Japanese Standard(JIS) Female Swivel

45° ElbowPage 10

Japanese Standard(JIS) Female Swivel

90° ElbowPage 10

M I S C E L L A N E O U S M E T R I C H O S E F I T T I N G S

Banjo Hose FittingPage 11

JIS Female Swivel30E Flare Seat

Page 11

Pressure WasherPage 11

Hollow Bolt for BanjoHose Fittings

Pages 12

Copper Washer forBanjo Hose Fittings

Page 12

Reusable Hose EndsSteel, Various

Page 13

Low Pressure &General Purpose

HosePage 14

Fittings for LowPressure Hoses

Page 15-18

Page 4: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

S T A I N L E S S S T E E L H O S E F I T T I N G S

S T A I N L E S S S T E E L C R I M P F E R R U L E S

Hose Type R1A, R2A, R12, R1T,

R2AT, R7 and R8Page 19

Stainless SteelBraided Smooth BoreTeflon Actual Hose ID

Page 20

Stainless SteelBraided Convoluted

Teflon HosePage 20

S T A I N L E S S S T E E L B S P , N P T , B S P T H O S E F I T T I N G S

BSPP Male 60E ConePage 21

BSPP Male Flat SeatPage 21

NPT MalePage 22

BSPT Male TaperedPage 22

BSPP Swivel FemalePage 23

BSPP Swivel Female Flat Seat

Page 23

BSPP Swivel Female45E ElbowPage 24

BSPP Swivel Female90E ElbowPage 24

S T A I N L E S S S T E E L S T A N D P I P E H O S E F I T T I N G S

Metric StandpipeStraightPage 25

Metric Standpipe 45E ElbowPage 25

Metric Standpipe 90E ElbowPage 25

Page 5: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

S T A I N L E S S S T E E L D I N 2 3 5 3 L - S E R I E S T U B E F I T T I N G S

Metric Male 24EL SeriesPage 26

Female Swivel 24Ewith O-Ring

L SeriesPage 26

Female Swivel 24E 45E

Elbow with O-RingPage 27

Female Swivel 24E 90E

Elbow with O-Ring Page 27

S T A I N L E S S S T E E L D I N 2 3 5 3 S - S E R I E S T U B E F I T T I N G S

Metric Male 24EPage 28

Female Swivel 24Ewith O-Ring

S SeriesPage 28

Female Swivel 24E 45E

Elbow with O-RingPage 28

Female Swivel 24E 90E

Elbow with O-Ring Page 28

S T A I N L E S S S T E E L J I C H O S E F I T T I N G S

Male JICPage 29

Female JIC Page 29

Female JIC 45EPage 30

Female JIC 90EPage 30

S T A I N L E S S S T E E L C O D E 6 1 & C O D E 6 2 F L A N G E

Code 61 FlangePage 31

Code 61 Flange 45EPage 31

Code 61 Flange 90EPage 31

Code 62 FlangePage 32

Code 62 Flange 45EPage 32

Code 62 Flange 90EPage 32

Page 6: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

M I S C E L L A N E O U S S T A I N L E S S S T E E L H O S E F I T T I N G S

Banjo Hose EndRNM/RNRPage 33

Hollow Bolt F15Page 33

I N T E R L O C K H O S E F I T T I N G S

3 1 6 S S I N T E R L O C K C R I M P F E R R U L E S & N P T H O S E F I T T I N GS

Crimp Ferrule 4SHHose Interlock

Page 34

Crimp Ferrule 100R13Hose Interlock

Page 34

Male NPT InterlockPage 34

3 1 6 S S I N T E R L O C K B S P P H O S E F I T T I N G S

Male BSPP InterlockPage 35

Female BSPPInterlockPage 35

Female BSPP 45E Interlock

Page 35

Female BSPP 90E Interlock

Page 35

3 1 6 S S I N T E R L O C K D I N 2 3 5 3 H O S E F I T T I N G S

Male DIN2353 S Series Interlock

Page 36

Female DIN 2353InterlockPage 36

Female DIN 2353 45E Interlock

Page 36

Female DIN 2353 90E Interlock

Page 36

Page 7: WFA Hose Fittings

Hydraulic Hose Fittings Index

Hose Fittings: IndexWilliams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

3 1 6 S S I N T E R L O C K J I C H O S E F I T T I N G S

Male JIC Interlock Page 37

Female JIC InterlockPage 37

Female JIC 45EInterlockPage 37

Female JIC 90EInterlockPage 37

3 1 6 S S I N T E R L O C K C O D E 6 1 & 6 2 F L A N G E H O S E F I T T I N G S

Code 61 FlangeInterlockPage 38

Code 61 Flange 45EInterlockPage 38

Code 61 Flange 90EInterlockPage 38

Code 62 FlangeInterlockPage 39

Code 62 Flange 45EInterlockPage 39

Code 62 Flange 90EInterlockPage 39

Page 8: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 1 of 39

Crimp Ferrules for Hydraulic Hose Fittings

SkiveType

SkiveType

NoSkive

Hose Size Hose Type: R1A Hose Type: R2A + R12 Hose Type: R1T + R2AT

3/16 PF-1-03 PF-2-03 PF-1T/2T-03

1/4 PF-1-04 PF-2-04 PF-1T/2T-045/16 PF-1-05 PF-2-05 PF-1T/2T-053/8 PF-1-06 PF-2-06 PF-1T/2T-06

1/2 PF-1-08 PF-2-08 PF-1T/2T-08

5/8 PF-1-10 PF-2-10 PF-1T/2T-10

3/4 PF-1-12 PF-2-12 PF-1T/2T-12

1" PF-1-16 PF-2-16 PF-1T/2T-16

1-1/4 PF-1-20 PF-2-20 PF-1T/2T-20

1-1/2 PF-1-24 PF-2-24 PF-1T/2T-24

2" PF-1-32 PF-2-32 PF-1T/2T-32

Hose Size Hose Type: R7 & R8Stainless Steel Braided

Smooth Bore Teflon HoseActual Hose ID

Stainless Steel BraidedConvoluted Teflon Hose

3/16 PF-7-031/4 PF-7-04 PTTB-04 PTTC-04

5/16 PF-7-05

3/8 PF-7-06 PTTB-06 PTTC-06

1/2 PF-7-08 PTTB-08 PTTC-08

5/8 PF-7-10 PTTB-10 PTTC-10

3/4 PF-7-12 PTTB-12 PTTC-12

1" PF-7-16 PTTB-16 PTTC-16

1-1/4 PTTC-20

1-1/2 PTTC-24

2" PTTC-32

All ferrules must be crimped full length, preferably with an 8-finger crimper.

Crimp specifications available.

Page 9: WFA Hose Fittings

Page 2 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

British Standard Pipe (BSP) Hose Fittings

HoseSize

BSPSize

ThreadSize

BSPP Male 60E Cone BSPP Male Flat Seat BSPT Male Tapered

1/8 1/8 1/8 – 28 AGR-02-02

1/8 1/4 1/4 – 19 AGR-02-04

3/16 1/8 1/8 – 28 AGR-03-02 AGR-K-03-02

3/16 1/4 1/4 – 19 AGR-03-04

1/4 1/8 1/8 – 28 AGR-04-02 AGR-K-04-02

1/4 1/4 1/4 – 19 AGR-04-04 AGR-F-04-04 AGR-K-04-04

1/4 3/8 3/8 – 19 AGR-04-06 AGR-K-04-06

5/16 3/8 3/8 – 19 AGR-05-06 AGR-F-05-06 AGR-K-05-06

3/8 1/4 1/4 – 19 AGR-06-04 AGR-K-06-04

3/8 3/8 3/8 – 19 AGR-06-06 AGR-F-06-06 AGR-K-06-06

3/8 1/2 1/2 – 14 AGR-06-08 AGR-F-06-08 AGR-K-06-08

1/2 3/8 3/8 – 19 AGR-08-06

1/2 1/2 1/2 – 14 AGR-08-08 AGR-F-08-08 AGR-K-08-08

1/2 5/8 5/8 – 14 AGR-08-10 AGR-K-08-10

1/2 3/4 3/4 – 14 AGR-08-12

5/8 5/8 5/8 – 14 AGR-10-10 AGR-F-10-10 AGR-K-10-10

5/8 3/4 3/4 – 14 AGR-10-12 AGR-K-10-12

3/4 3/4 3/4 – 14 AGR-12-12 AGR-F-12-12 AGR-K-12-12

3/4 1" 1 – 11 AGR-12-16 AGR-F-12-16 AGR-K-12-16

1" 1" 1 – 11 AGR-16-16 AGR-F-16-16 AGR-K-16-16

1" 1-1/4 41 / – 11 AGR-16-20 AGR-F-16-20 AGR-K-16-201

1-1/4 1-1/4 41 / – 11 AGR-20-20 AGR-F-20-20 AGR-K-20-201

1-1/4 1-1/2 21 / – 11 AGR-20-24 AGR-K-20-241

1-1/2 1-1/2 21 / – 11 AGR-24-24 AGR-F-24-24 AGR-K-24-241

2" 2" 2 – 11 AGR-32-32 AGR-F-32-32 AGR-K-32-32

BSP Parallel threads may be used in ports (with appropriate seals)

or in BSP female swivel connections (sealing on the 60E cone).

The flat seat BSPP fittings are most often seen on HIAB cranes

BSP Taper threads can also be used in applications requiring Japanese (JIS) male threads

Page 10: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 3 of 39

British Standard Pipe (BSP) Hose Fittings

HoseSize

BSPSize

ThreadSize

BSPP Swivel Female BSPP Swivel Female Flat Seat

1/8 1/8 1/8 – 28 DKR-02-02

1/8 1/4 1/4 – 19 DKR-02-04

3/16 1/8 1/8 – 28 DKR-03-02

3/16 1/4 1/4 – 19 DKR-03-04

1/4 1/8 1/8 – 28 DKR-04-02

1/4 1/4 1/4 – 19 DKR-04-04 DKR-F-04-04

1/4 3/8 3/8 – 19 DKR-04-06 DKR-F-04-06

1/4 1/2 1/2 – 14 DKR-04-08 DKR-F-04-08

5/16 1/4 1/4 – 19 DKR-05-04

5/16 3/8 3/8 – 19 DKR-05-06 DKR-F-05-06

3/8 1/4 1/4 – 19 DKR-06-04

3/8 3/8 3/8 – 19 DKR-06-06 DKR-F-06-06

3/8 1/2 1/2 – 14 DKR-06-08 DKR-F-06-08

1/2 3/8 3/8 – 19 DKR-08-06 DKR-F-08-06

1/2 1/2 1/2 – 14 DKR-08-08 DKR-F-08-08

1/2 5/8 5/8 – 14 DKR-08-10

1/2 3/4 3/4 – 14 DKR-08-12 DKR-F-08-12

5/8 1/2 1/2 – 14 DKR-10-08

5/8 5/8 5/8 – 14 DKR-10-10

5/8 3/4 3/4 – 14 DKR-10-12 DKR-F-10-12

3/4 3/4 3/4 – 14 DKR-12-12 DKR-F-12-12

3/4 1" 1 – 11 DKR-12-16

1" 1" 1 – 11 DKR-16-16 DKR-F-16-16

41" 1-1/4 1 / – 11 ! DKR-16-201

41-1/4 1-1/4 1 / – 11 ! DKR-20-20 DKR-F-20-201

21-1/4 1-1/2 1 / – 11 ! DKR-20-241

21-1/2 1-1/2 1 / – 11 ! DKR-24-24 DKR-F-24-241

1-1/2 2" 2 – 11 ! DKR-24-32

2" 2" 2 – 11 ! DKR-32-32 DKR-F-32-32

! Sizes 1-1/4" BSP and above will only be available with o-ring seal (See DKOR- fittings) once stock is depleted.

Page 11: WFA Hose Fittings

Page 4 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

British Standard Pipe (BSP) Hose Fittings

HoseSize

BSPSize

ThreadSize

BSPP Swivel Female 45E Elbow BSPP Swivel Female 90E Elbow

3/16 1/8 1/8 – 28 DKR-45-03-02 DKR-90-03-02

3/16 1/4 1/4 – 19 DKR-45-03-04 DKR-90-03-04

1/4 1/8 1/8 – 28 DKR-45-04-02 DKR-90-04-02

1/4 1/4 1/4 – 19 DKR-45-04-04 DKR-90-04-04

1/4 3/8 3/8 – 19 DKR-45-04-06 DKR-90-04-06

1/4 1/2 1/2 – 14 DKR-45-04-08 DKR-90-04-08

5/16 3/8 3/8 – 19 DKR-45-05-06 DKR-90-05-06

3/8 3/8 3/8 – 19 DKR-45-06-06 DKR-90-06-06

3/8 1/2 1/2 – 14 DKR-45-06-08 DKR-90-06-08

1/2 1/2 1/2 – 14 DKR-45-08-08 DKR-90-08-08

1/2 5/8 5/8 – 14 DKR-45-08-10 DKR-90-08-10

1/2 3/4 3/4 – 14 DKR-45-08-12 DKR-90-08-12

5/8 1/2 1/2 – 14 DKR-45-10-08 DKR-90-10-08

5/8 5/8 5/8 – 14 DKR-45-10-10 DKR-90-10-10

5/8 3/4 3/4 – 14 DKR-45-10-12 DKR-90-10-12

3/4 3/4 3/4 – 14 DKR-45-12-12 DKR-90-12-12

3/4 1" 1 – 11 DKR-45-12-16 DKR-90-12-16

1" 1" 1 – 11 DKR-45-16-16 DKR-90-16-16

41" 1-1/4 1 / – 11 ! DKR-45-16-20 ! DKR-90-16-201

41-1/4 1-1/4 1 / – 11 ! DKR-45-20-20 ! DKR-90-20-201

21-1/4 1-1/2 1 / – 11 ! DKR-45-20-24 ! DKR-90-20-241

21-1/2 1-1/2 1 / – 11 ! DKR-45-24-24 ! DKR-90-24-241

1-1/2 2" 2 – 11 ! DKR-45-24-32 ! DKR-90-24-32

2" 2" 2 – 11 ! DKR-45-32-32 ! DKR-90-32-32

! Sizes 1-1/4" BSP and above will only be available with o-ring seal (See DKOR- fittings) once stock is depleted.

Page 12: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 5 of 39

BSP Female Swivel O-Ring Hose Fittings

HoseSize

BSPSize

BSPP Female Swivel WithO-Ring

BSPP Female Swivel 45E Elbow With O-Ring

BSPP Female Swivel90E Elbow With O-Ring

1/4 1/4 DKOR-04-04 DKOR-45-04-04 DKOR-90-04-04

3/8 3/8 DKOR-06-06 DKOR-45-06-06 DKOR-90-06-06

1/2 1/2 DKOR-08-08 DKOR-45-08-08 DKOR-90-08-08

5/8 5/8 DKOR-10-10 DKOR-45-10-10 DKOR-90-10-10

3/4 3/4 DKOR-12-12 DKOR-45-12-12 DKOR-90-12-12

1" 1" DKOR-16-16 DKOR-45-16-16 DKOR-90-16-16

1" 1-1/4 DKOR-16-20 DKOR-45-16-20 DKOR-90-16-20

1-1/4 1-1/4 DKOR-20-20 DKOR-45-20-20 DKOR-90-20-20

1-1/4 1-1/2 DKOR-20-24 DKOR-45-20-24 DKOR-90-20-24

1-1/2 1-1/2 DKOR-24-24 DKOR-45-24-24 DKOR-90-24-24

1-1/2 2" DKOR-24-32 DKOR-45-24-32 DKOR-90-24-32

2" 2" DKOR-32-32 DKOR-45-32-32 DKOR-90-32-32

Page 13: WFA Hose Fittings

Page 6 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Metric Standpipe Hose Fittings

HoseSize

StandpipeSize

Metric Standpipe Straight Metric Standpipe 45E Elbow

Metric Standpipe 90E Elbow

3/16 6mm BEM-03-06 BEM-45-03-06 BEM-90-03-06

3/16 8mm BEM-03-08 BEM-45-03-08 BEM-90-03-08

1/4 6mm BEM-04-06 BEM-45-04-06 BEM-90-04-06

1/4 8mm BEM-04-08 BEM-45-04-08 BEM-90-04-08

1/4 10mm BEM-04-10 BEM-45-04-10 BEM-90-04-10

1/4 12mm BEM-04-12 BEM-45-04-12 BEM-90-04-12

5/16 8mm BEM-05-08 BEM-45-05-08 BEM-90-05-08

5/16 10mm BEM-05-10 BEM-45-05-10 BEM-90-05-10

5/16 12mm BEM-05-12 BEM-45-05-12 BEM-90-05-12

3/8 10mm BEM-06-10 BEM-45-06-10 BEM-90-06-10

3/8 12mm BEM-06-12 BEM-45-06-12 BEM-90-06-12

3/8 14mm BEM-06-14 BEM-45-06-14 BEM-90-06-14

3/8 15mm BEM-06-15 BEM-45-06-15 BEM-90-06-15

1/2 14mm BEM-08-14 BEM-45-08-14 BEM-90-08-14

1/2 15mm BEM-08-15 BEM-45-08-15 BEM-90-08-15

1/2 16mm BEM-08-16 BEM-45-08-16 BEM-90-08-16

1/2 18mm BEM-08-18 BEM-45-08-18 BEM-90-08-18

5/8 18mm BEM-10-18 BEM-45-10-18 BEM-90-10-18

5/8 20mm BEM-10-20 BEM-45-10-20 BEM-90-10-20

3/4 20mm BEM-12-20 BEM-45-12-20 BEM-90-12-20

3/4 22mm BEM-12-22 BEM-45-12-22 BEM-90-12-22

3/4 25mm BEM-12-25 BEM-45-12-25 BEM-90-12-25

1" 28mm BEM-16-28 BEM-45-16-28 BEM-90-16-28

1" 30mm BEM-16-30 BEM-45-16-30 BEM-90-16-30

1-1/4 35mm BEM-20-35 BEM-45-20-35 BEM-90-20-35

1-1/4 38mm BEM-20-38 BEM-45-20-38 BEM-90-20-38

1-1/2 42mm BEM-24-42 BEM-45-24-42 BEM-90-24-42

Stand pipes are most often used to connect hose to DIN 2353 tube fittings.

This is a convenient way to combine hose and tubing in an installation.

For spiral hose applications, use the DKOL- and DKOS- hose ends.

Page 14: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 7 of 39

Metric Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)

HoseSize

TubeSize

ThreadSize

Metric Male 24E Female Swivel 24E with O-Ring

1/4 8-L M14x1.5 CEL-04-14 DKOL-04-14

5/16 10-L M16x1.5 CEL-05-16 DKOL-05-16

3/8 10-L M16x1.5 CEL-06-16 DKOL-06-16

3/8 12-L M18x1.5 CEL-06-18 DKOL-06-18

1/2 15-L M22x1.5 CEL-08-22 DKOL-08-22

5/8 18-L M26x1.5 CEL-10-26 DKOL-10-26

3/4 22-L M30x2 CEL-12-30 DKOL-12-30

1" 28-L M36x2 CEL-16-36 DKOL-16-36

1-1/4 35-L M45x2 CEL-20-45 DKOL-20-45

1-1/2 42-L M52x2 CEL-24-52 DKOL-24-52

HoseSize

TubeSize

ThreadSize

Female Swivel 24E 45E Elbow & O-Ring

Female Swivel 24E 90EElbow & O-Ring

1/4 8-L M14x1.5 DKOL-45-04-14 DKOL-90-04-14

5/16 10-L M16x1.5 DKOL-45-05-16 DKOL-90-05-16

3/8 10-L M16x1.5 DKOL-45-06-16 DKOL-90-06-16

3/8 12-L M18x1.5 DKOL-45-06-18 DKOL-90-06-18

1/2 15-L M22x1.5 DKOL-45-08-22 DKOL-90-08-22

5/8 18-L M26x1.5 DKOL-45-10-26 DKOL-90-10-26

3/4 22-L M30x2 DKOL-45-12-30 DKOL-90-12-30

1" 28-L M36x2 DKOL-45-16-36 DKOL-90-16-36

1-1/4 35-L M45x2 DKOL-45-20-45 DKOL-90-20-45

1-1/2 42-L M52x2 DKOL-45-24-52 DKOL-90-24-52

Page 15: WFA Hose Fittings

Page 8 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Metric Hose Fittings for DIN 2353 Tube Fittings (S Series, 24E Cone)

HoseSize

TubeSize

ThreadSize

Metric Male 24E Female Swivel 24E with O-Ring

1/4 10-S M18x1.5 CES-04-18 DKOS-04-18

5/16 12-S M20x1.5 CES-05-20 DKOS-05-20

3/8 12-S M20x1.5 CES-06-20 DKOS-06-20

3/8 14-S M22x1.5 CES-06-22 DKOS-06-22

1/2 16-S M24x1.5 CES-08-24 DKOS-08-24

5/8 20-S M30x2 CES-10-30 DKOS-10-30

3/4 25-S M36x2 CES-12-36 DKOS-12-36

1" 30-S M42x2 CES-16-42 DKOS-16-42

1-1/4 38-S M52x2 CES-20-52 DKOS-20-52

HoseSize

TubeSize

ThreadSize

Female Swivel 24E 45E Elbow & O-Ring Female Swivel 24E 90E Elbow & O-Ring

1/4 10-S M18x1.5 DKOS-45-04-18 DKOS-90-04-18

5/16 12-S M20x1.5 DKOS-45-05-20 DKOS-90-05-20

3/8 12-S M20x1.5 DKOS-45-06-20 DKOS-90-06-20

3/8 14-S M22x1.5 DKOS-45-06-22 DKOS-90-06-22

1/2 16-S M24x1.5 DKOS-45-08-24 DKOS-90-08-24

5/8 20-S M30x2 DKOS-45-10-30 DKOS-90-10-30

3/4 25-S M36x2 DKOS-45-12-36 DKOS-90-12-36

1" 30-S M42x2 DKOS-45-16-42 DKOS-90-16-42

1-1/4 38-S M52x2 DKOS-45-20-52 DKOS-90-20-52

Page 16: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 9 of 39

Metric Hose Fittings 60E/ 24E Cone Seat

HoseSize

ThreadSize

Metric Male 60E Cone Metric Female Swivel

3/16 M10x1 AGM-03-10 DKM-03-10

1/4 M12X1.5 AGM-04-12 DKM-04-12

1/4 M14X1.5 AGM-04-14 DKM-04-14

5/16 M16X1.5 AGM-05-16 DKM-05-16

5/16 M18X1.5 AGM-05-18 DKM-05-18

3/8 M16X1.5 AGM-06-16 DKM-06-16

3/8 M18X1.5 AGM-06-18 DKM-06-18

3/8 M22X1.5 AGM-06-22 DKM-06-22

1/2 M18X1.5 AGM-08-18 DKM-08-18

1/2 M20X1.5 AGM-08-20 DKM-08-20

1/2 M22X1.5 AGM-08-22 DKM-08-22

5/8 M26X1.5 AGM-10-26 DKM-10-26

3/4 M26X1.5 AGM-12-26 DKM-12-26

3/4 M30X1.5 AGM-12-30 DKM-12-30

1" M38X1.5 AGM-16-38 DKM-16-38

1-1/4 M45X1.5 AGM-20-45 DKM-20-45

1-1/2 M52X1.5 AGM-24-52 DKM-24-52

2" M65X2 AGM-32-65 DKM-32-65

Notes:

1. AGM- hose ends may be used as a port fitting (using an appropriate seal) or may connect to a female swivel

fitting with a 60E cone seat.

2. The female swivel fittings (DKM-, DKM-45-, and DKM-90-) may also be used to connect to DIN 2353-L tube

fittings with the corresponding thread size. This only applies up to thread size M26x1.5 (18-L tube size).

Page 17: WFA Hose Fittings

Page 10 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Metric Hose Fittings 60E/ 24E Cone Seat

HoseSize

ThreadSize

Female Swivel 45E Elbow Female Swivel 90E Elbow

3/16 M10x1 DKM-45-03-10 DKM-90-03-10

1/4 M12X1.5 DKM-45-04-12 DKM-90-04-12

1/4 M14X1.5 DKM-45-04-14 DKM-90-04-14

5/16 M16X1.5 DKM-45-05-16 DKM-90-05-16

5/16 M18X1.5 DKM-45-05-18 DKM-90-05-18

3/8 M16X1.5 DKM-45-06-16 DKM-90-06-16

3/8 M18X1.5 DKM-45-06-18 DKM-90-06-18

3/8 M22X1.5 DKM-45-06-22 DKM-90-06-22

1/2 M18X1.5 DKM-45-08-18 DKM-90-08-18

1/2 M20X1.5 DKM-45-08-20 DKM-90-08-20

1/2 M22X1.5 DKM-45-08-22 DKM-90-08-22

5/8 M26X1.5 DKM-45-10-26 DKM-90-10-26

3/4 M26X1.5 DKM-45-12-26 DKM-90-12-26

3/4 M30X1.5 DKM-45-12-30 DKM-90-12-30

1" M38X1.5 DKM-45-16-38 DKM-90-16-38

1-1/4 M45X1.5 DKM-45-20-45 DKM-90-20-45

1-1/2 M52X1.5 DKM-45-24-52 DKM-90-24-52

2" M65X2 DKM-45-32-65 DKM-90-32-65

Notes:

1. AGM- hose ends may be used as a port fitting (using an appropriate seal) or may connect to a female swivel

fitting with a 60E cone seat.

2. The female swivel fittings (DKM-, DKM-45-, and DKM-90-) may also be used to connect to DIN 2353-L tube

fittings with the corresponding thread size. This only applies up to thread size M26x1.5 (18-L tube size).

Page 18: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 11 of 39

Miscellaneous Metric Hose Fittings

Banjo Hose Fitting

Hose Size Banjo Bolt Size Part Number

3/16 1/8-28 BSPP RNR-03-02

1/4 1/8-28 BSPP RNR-04-02

1/4 1/4-19 BSPP RNR-04-04

1/4 3/8-19 BSPP RNR-04-06

3/8 3/8-19 BSPP RNR-06-06

3/8 1/2-14 BSPP RNR-06-08

1/2 1/2-14 BSPP RNR-08-08

3/4 3/4-14 BSPP RNR-12-12

1" 1-11 BSPP RNR-16-16

3/16 10mm RNR-03-10

1/4 10mm RNR-04-10

1/4 12mm RNM-04-12

1/4 14mm RNM-04-14

3/8 16mm RNM-06-16

3/8 18mm RNM-06-18

1/2 18mm RNM-08-18

1/2 22mm RNM-08-22

5/8 18mm RNM-10-18

5/8 22mm RNM-10-22

5/8 26mm RNM-10-26

3/4 26mm RNM-12-26

3/4 30mm RNM-12-30

1" 33mm RNM-16-33

Notes:

Additional metric sizes can be obtained by using the

following BSPP sizes:

For 27mm use RNR-12-12

JIS Female Swivel - 30E Flare Seat

Hose Size Thread Size Part Number

1/4 1/4-19 DKR-J-04-04

3/8 3/8-19 DKR-J-06-06

1/2 1/2-14 DKR-J-08-08

3/4 3/4-14 DKR-J-12-12

1" 1-11 DKR-J-16-16

1-1/4 1 1/4-11 DKR-J-20-20

1/4 M14X1.5 DKM-J-04-14

1/4 M16X1.5 DKM-J-04-16

3/8 M18X1.5 DKM-J-06-18

1/2 M22X1.5 DKM-J-08-22

3/4 M26X1.5 DKM-J-12-26

1" M30X1.5 DKM-J-16-30

1-1/4 M38X1.5 DKM-J-20-38

Pressure Washer

Hose Size Thread Size Part Number

1/4 M22 x 1.5 DKK-04-22

5/16 M22 x 1.5 DKK-05-22

3/8 M22 x 1.5 DKK-06-22

Page 19: WFA Hose Fittings

Page 12 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Hose Fitting Accessories

Hollow Bolt for Banjo Hose Fittings

Banjo Bolt Size Part Number

1/8 BSPP F15 R1/8

1/4 BSPP F15 R1/4

3/8 BSPP F15 R3/8

1/2 BSPP F15 R1/2

5/8 BSPP F15 R5/8

3/4 BSPP F15 R3/4

1" BSPP F15 R1

1-1/4 BSPP F15 R11/4

1-1/2 BSPP F15 R11/2

M10 x 1 F15 M10x1

M12 x 1.5 F15 M12x1.5

M14 x 1.5 F15 M14x1.5

M16 x 1.5 F15 M16x1.5

M18 x 1.5 F15 M8x1.5

M20 x 1.5 F15 M20x1.5

M22 x 1.5 F15 M22x1.5

M26 x 1.5 F15 M26x1.5

M27 x 2 F15 M27x2

M30 x 2 F15 M30x2

M33 x 2 F15 M33x2

Copper Washer for Banjo Hose Fittings

Thread Size Part Number

1/8 BSPP CWR 1/8

1/4 BSPP CWR 1/4

3/8 BSPP CWR 3/8

1/2 BSPP CWR 1/2

5/8 BSPP CWR 5/8

3/4 BSPP CWR 3/4

1" BSPP CWR 01

1-1/4 BSPP CWR 11/4

1-1/2 BSPP CWR 11/2

M10 x 1 CWM 10

M12 x 1.5 CWM 12

M14 x 1.5 CWM 14

M16 x 1.5 CWM 16

M18 x 1.5 CWM 18

M20 x 1.5 CWM 20

M22 x 1.5 CWM 22

M26 x 1.5 CWM 26

M27 x 2 CWM 27

M30 x 2 CWM 30

M33 x 2 CWM 33

Page 20: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 13 of 39

Re-Useable Hose Ends Steel

RAGR - BSPP Male RAGRK - BSPT Male RAGJ - JIC Male

RAGN - NPT MaleRCEL - DIN2353L MaleRCES - DIN2353S Male

RDKOL - DIN2353L FemaleRDKOS - DIN2353S Female

RDKOL45 - DIN2353L Female 45E ElbowRDKOS45 - DIN2353S Female 45E Elbow

RDKOL90 - DIN2353L Female 90E ElbowRDKOS90 - DIN2353S Female 90E Elbow RBEM - Metric Standpipe

RBEM45 - Metric Standpipe 45E Elbow RBEM90 - Metric Standpipe 90E Elbow RDKR - BSPP Female

RDKR45 - BSPP Female 45E Elbow RDKR90 - BSPP Female 90E Elbow RDKJ - JIC Female

RDKJ45 - JIC Female 45E Elbow RDKJ90 - JIC Female 90E Elbow RHF - Hose Ferrule Re-useable

Please enquire about available sizes and hose applications for the re-useable hose fittings.

Page 21: WFA Hose Fittings

Page 14 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Low Pressure and General Purpose Hose

O I L, G A S O L I N E A N D P N E U M A T I C U S E

Oil and Gasoline Hose Type PZ (DIN 73379)

Synthetic rubber inner tube. Steel wire braided cover. Coloured marking thread.

Temperature range -35EC to +80EC.

Part Number Inner diameter Outer Diameter Burst Pressure

PZ 4/5 4.5 mm 9.5 mm 60 bar

PZ 5/6 5.5 mm 10.5 mm 60 bar

PZ 8 7.5 mm 12.5 mm 50 bar

PZ 10 9.0 mm 14.0 mm 50 bar

PZ 12 11.5 mm 18.0 mm 50 bar

PZ 15 14.5 mm 22.0 mm 50 bar

PZ 18 17.0 mm 25.0 mm 50 bar

PZ 20 19.0 mm 29.0 mm 50 bar

Oil and Gasoline Hose Type PZVA (DIN 73379)

Synthetic rubber inner tube.Stainless steel wire braided cover.

Temperature range -35EC to +80EC

Part Number Inner diameter Outer Diameter Burst Pressure

PZ 5/6 VA 5.5 mm 10.5 mm 60 bar

PZ 8 VA 7.5 mm 12.5 mm 50 bar

PZ 10 VA 9.0 mm 15.0 mm 50 bar

PZ 12 VA 11.5 mm 18.0 mm 50 bar

Page 22: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 15 of 39

Fittings for Low Pressure Hoses

Crimp Sleeves Type H

Steel with zinc plating.

Part Number Inside Diameter (mm) End Bore (mm) Length (mm)

H 4/9 9.0 5.5 17.0

H 5/10 10.0 6.5 17.0

H 5/11 11.0 6.5 17.0

H 6/11 11.0 7.5 17.0

H 6/12/12 12.0 12.0 19.0

H 6/12 12.0 7.5 20.0

H 6/13.5 13.5 7.5 20.0

H 6/15 15.0 7.5 20.0

H 8/13.5 13.5 10.0 20.0

H 8/14 14.0 10.0 20.0

H 8/15 15.0 10.0 20.0

H 10/15 15.0 11.7 20.0

H 10/16 16.0 11.7 20.0

H 10/17 17.0 11.7 21.0

H 12/18 18.0 13.8 21.0

H 12/19 19.0 13.8 26.0

H 12/20 20.0 13.8 26.0

H 12/22 22.0 15.6 32.0

H 15/23 23.0 17.0 32.0

H 15/24.5 24.5 17.0 33.0

H 15/26.5 26.5 19.5 33.0

H 18/28 28.0 20.5 34.0

H 20/30 30.0 24.0 32.0

H 20/32 32.0 24.0 34.0

H 20/33 33.0 24.0 34.0

H 20/34 34.0 24.0 34.0

H 25/36 36.0 25.0 35.0

H 25/38 38.0 27.0 35.0

H 25/40 40.0 28.0 40.0

Choose crimp shells based on hose O.D. and end bore required.

These shells are to be crimped on using a universal style crimper with 6 or 8 die fingers.

Page 23: WFA Hose Fittings

Page 16 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Fittings for Low Pressure Hoses

Hose Nipple Type SFor Female Swivel

Similar to DIN 7608Cone Seal

PartNumber

HoseI.D.

(mm)Nut Required

S 5 5 UM 5/10, UM 5 1/8

S 6 6 UM 6/12, UM 6 1/4

S 6/8 6 UM 8/14

S 6/10 6 UM 10/16

S 8 8 UM 8/14, UM 8 1/4

S 8/10 8 UM 10/16

S 10 10 UM 10/16, UM 10 3/8

S 10/12 10 UM 12/18

S 12 12 UM 12/18

S 12/15 12 UM 15/22

S 15/22 15 UM 15/22

S 15/26 15 UM 18/26

S 18/26 18 UM 18/26

S 12 1/2 12 UM 1/2

S 15 1/2 15 UM 1/2

S20 3/4 20 UM 3/4

S 20 1 20 UM 1

Hose Nipple Type S-FFor Female Swivel

Flat Seat

PartNumber

Hose I.D.(mm)

Nut Required

S 5 F 5 UM 5/10, UM 5 1/8

S 6 F 6 UM 6/12, UM 6 1/4

S 8 F 8 UM 8/14, UM 8 1/4

S 10 F 10 UM 10/16, UM 10 3/8

S 12 F 12 UM 12/18

S 15/22 F 15 UM 15/22

S 15/26 F 15 UM 18/26

S 18/26 F 18 UM 18/26

S 12 1/2 F 12 UM 1/2

S 15 1/2 F 15 UM 1/2

S20 3/4 F 20 UM 3/4

S 20 1F 20 UM 1

Nut Type UM

Similar to DIN 3870With Metric & BSP Thread.

PartNumber

NominalBore

Thread Size

UM 5/10 3 M10 x 1

UM 6/12 4 M12 x 1.5

UM 8/14 6 M14 x 1.5

UM 10/16 8 M16 x 1.5

UM 12/18 10 M18 x 1.5

UM 15/22 12 M22 x 1.5

UM 18/26 16 M26 x 1.5

UM 5 1/8 3 1/8 BSP

UM 6 1/4 4 1/4 BSP

UM 8 1/4 6 1/4 BSP

UM 10 8 3/8 BSP

UM 1/2 10 1/2 BSP

Banjo Hose Nipple

Type RSSimilar to DIN 7642

Part Number

Hose I.D. (mm)

Banjo Bolt Size

RS 5/6 4/5 6 mm

RS 5/8 5/6 8 mm

RS 6/10 5/6 10 mm, R1/8

RS 6/12 5/6 12 mm

RS 6/14 5/6 14 mm, R1/4

RS 8/10 8 10 mm, R1/8

RS 8/12 8 12 mm

RS 8/14 8 14 mm, R1/4

RS 10/12 10 12 mm

RS 10/14 10 14 mm, R1/4

RS 10/16 10 16 mm

RS 10/18 10 18 mm

RS 12/16 12 16 mm

RS 12/18 12 18 mm

RS 15/18 15 18 mm

RS 15/22 15 22 mm

RS 15/26 15 26 mm

RS 18/22 18 22 mm

RS 18/26 18 26 mm

Page 24: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 17 of 39

Fittings for Low Pressure Hoses

Banjo Double Hose Nipple

Type DRS

Part NumberHose I.D.

(mm)Banjo Bolt Size

DRS 5/8 5/6 8 mm

DRS 6/10 5/6 10 mm, R1/8

DRS 8/12 8 12 mm

DRS 10/14 10 14 mm, R1/4

StandpipeHose Nipple

Type RST

Part NumberHose I.D.

(mm)Standpipe

Size

RST 4 4/5 4 mm

RST 5 5/6 5 mm

RST 6 5/6 6 mm

RST 8 8 8 mm

RST 10 10 10 mm

RST 12 12 12 mm

RST 15 15 15 mm

RST 18 18 18 mm

Standpipe Hose

Nipple 90E

Type RBS/90

Part NumberHose I.D.

(mm)Standpipe

Size

RBS 4/90 4/5 4 mm

RBS 5/90 5/6 5 mm

RBS 6/90 5/6 6 mm

RBS 8/90 8 8 mm

RBS 10/90 10 10 mm

RBS 12/90 12 12 mm

RBS 15/90 15 15 mm

Standpipe Hose Nipple 45E

Type RBS/45

Part NumberHose I.D.

(mm)Standpipe

Size

RBS 6/45 5/6 6 mm

RBS 8/45 8 8 mm

RBS 10/45 10 10 mm

RBS 12/45 12 12 mm

RBS 15/45 15 15 mm

Male Thread Hose Nipple

Type SA Male Thread 60ECone

Seat (KO) or Flat Seat (F)

Part NumberHose I.D.

(mm)Thread

Size

SA 5/10 KO 5/6 M 10x1

SA 6/12 KO 5/6 M 12x1.5

SA 8/14 KO 8 M 14x1.5

SA 10/16 KO 10 M 16x1.5

SA 12/18 KO 12 M 18x1.5

SA 15/22 KO 15 M 22x1.5

SA 15/26 KO 15 M 26x1.5

SA 18/26 KO 18 M 26x1.5

SA 15/22 F 15 M 22x1.5

SA 15/26 F 15 M 26x1.5

SA 18/26 F 18 M 26x1.5

Male Thread Hose Nipple

Type SA 24E Cone Seat for

Cutting Ring

Part NumberHose I.D.

(mm)Thread

SizeTube Size

SA 5/10 S 5/6 M 10x1 5 LL

SA 6/12 S 5/6 M 12x1.5 6 L

SA 8/14 S 8 M 14x1.5 8 L

SA 10/16 S 10 M 16x1.5 10 L

SA 12/18 S 12 M 18x1.5 12 L

SA 15/22 S 15 M 22x1.5 15 L

SA 15/22/16 S 15 M 22x1.5 16 LL

SA 15/26 S 15 M 26x1.5 18 L

SA 18/26 S 18 M 26x1.5 18 L

Page 25: WFA Hose Fittings

Page 18 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Fittings for Low Pressure Hoses

Brass Compression

Sleeves

For Metric Plastic Tubing

Part NumberTubeSize

DKN 4 4 mm

DKN 5 5 mm

DKN 6 6 mm

DKN 8 8 mm

DKN 10 10 mm

DKN 12 12 mm

Brass Reinforcing Sleeves

For Metric Plastic Tubing

Part NumberTube O.D.

(mm)Tube I.D.

(mm)

VHP 4/1.0 4 2

VHP 5/1.0 5 3

VHP 6/1.0 6 4

VHP 8/1.0 8 6

VHP 8/1.5 8 5

VHP 9/1.5 9 6

VHP 10/1.0 10 8

VHP 10/1.25 10 7.5

VHP 10/1.5 10 7

VHP 11/1.5 11 8

VHP 12/1.5 12 9

VHP 12/2.0 12 8

VHP 14/2.0 14 10

VHP 15/1.5 15 12

VHP 16/2.0 16 12

VHP 18/2.0 18 14

VHP 22/2.0 22 18

Grease Nipple Type SM A

Metric and BSP Thread

Part Number Thread Size

SM 6A M 6x1

SM 8A M 8x1

SM 10A M 10x1

SM 14A 1/4 BSP

SM 18A 1/8 BSP

Grease Nipple Type SM B

Metric and BSP Thread

Part Number Thread Size

SM 6B M 6x1

SM 8B M 8x1

SM 10B M 10x1

SM 14B 1/4 BSP

SM 18B 1/8 BSP

Grease Nipple Type SM C

Metric and BSP Thread

Part NumberThread

Size

SM 6C M 6x1

SM 8C M 8x1

SM 10C M 10x1

SM 14C 1/4 BSP

SM 18C 1/8 BSP

Page 26: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 19 of 39

Stainless Steel Crimp Ferrules

Skive Skive

Hose Type: R1A Hose Type: R2A & R12

Hose Model Number Part Number Model Number Part Number

3/16 PF-1-03SS 82003-0300 PF-2-03SS 82006-0300 R2A

1/4 PF-1-04SS 82003-0400 PF-2-04SS ZPF12240-04005/16 PF-1-05SS 82003-0500 PF-2-05SS ZPF12240-05003/8 PF-1-06SS 82003-0600 PF-2-06SS ZPF12240-0600

1/2 PF-1-08SS 82003-0800 PF-2-08SS ZPF12240-0800

5/8 PF-1-10SS 82003-1000 PF-2-10SS ZPF12240-1000

3/4 PF-1-12SS 82003-1200 PF-2-12SS ZPF12240-1200

1" PF-1-16SS 82003-1600 PF-2-16SS ZPF12240-1600

1-1/4 PF-1-20SS 82003-2000 PF-2-20SS ZPF12240-2000

1-1/2 PF-1-24SS 82003-2400 PF-2-24SS ZPF12240-2400

2" PF-1-32SS 82003-3200 PF-2-32SS ZPF12240-3200

No Skive

Hose Type: R1T & R2AT Hose Type: R7 & R8

Hose Model Number Part Number Model Number Part Number

3/16PF-1T-03SSPF-2T-03SS

81020-0300 R1AT81030-0300 R2AT

PF-7-03SS 81012-0300

1/4 PF-1T/2T-04SS ZPF22120-0400 PF-7-04SS 81012-04005/16 PF-1T/2T-05SS ZPF22120-0500 PF-7-05SS 81012-05003/8 PF-1T/2T-06SS ZPF22120-0600 PF-7-06SS 81012-0600

1/2 PF-1T/2T-08SS ZPF22120-0800 PF-7-08SS 81012-08005/8 PF-1T/2T-10SS ZPF22120-1000 PF-7-10SS 81012-1000

3/4 PF-1T/2T-12SS ZPF22120-1200 PF-7-12SS 81012-1200

1" PF-1T/2T-16SS ZPF22120-1600 PF-7-16SS 81012-1600

1-1/4 PF-1T/2T-20SS ZPF22120-2000

1-1/2 PF-1T/2T-24SS ZPF22120-2400

2" PF-1T/2T-32SS ZPF22120-3200

All ferrules must be crimped full length, preferably with an 8-finger crimper. Crimp specifications available.

Page 27: WFA Hose Fittings

Page 20 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel Crimp Ferrules

Stainless Steel Braided Smooth Bore Teflon Hose

Actual Hose ID

Stainless Steel BraidedConvoluted Teflon Hose

Hose Model Number Part Number Hose Model Number Part Number

3/16 PTTB-03SS 81040-0300 3/16 PTTC-03SS 81041-0300

1/4 PTTB-04SS 81040-0400 1/4 PTTC-04SS 81041-04005/16 PTTB-05SS 81040-0500 5/16 PTTC-05SS 81041-05003/8 PTTB-06SS 81040-0600 3/8 PTTC-06SS 81041-0600

1/2 PTTB-08SS 81040-0800 1/2 PTTC-08SS 81041-08005/8 PTTB-10SS 81040-1000 5/8 PTTC-10SS 81041-1000

3/4 PTTB-12SS 81040-1200 3/4 PTTC-12SS 81041-1200

7/8 PTTB-14SS 81040-1400 1" PTTC-16SS 81041-1600

1" PTTB-16SS 81040-1600 1-1/4 PTTC-20SS 81041-2000

1-1/8 PTTB-18SS 81040-1800 1-1/2 PTTC-24SS 81041-2400

2" PTTC-32SS 81041-3200

2-1/2 PTTC-40SS 81041-4000

All ferrules must be crimped full length, preferably with an 8-finger crimper.

Crimp specifications available.

Page 28: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 21 of 39

Stainless Steel BSP Hose Fittings

HoseSize

BSPSize

ThreadSize

BSPP Male 60E Cone BSPP Male Flat Seat

Model Number

Part Number

ModelNumber

Part Number

1/8 1/8 1/8 – 28 AGR-02-02-SS 84112-0202

3/16 1/8 1/8 – 28 AGR-03-02-SS 84112-0203

3/16 1/4 1/4 – 19 AGR-03-04-SS 84112-0403

1/4 1/8 1/8 – 28 AGR-04-02-SS 84112-0204

1/4 1/4 1/4 – 19 AGR-04-04-SS 84112-0404 AGR-F-04-04-SS 84212-0404

1/4 3/8 3/8 – 19 AGR-04-06-SS 84112-0604

1/2 1/2 1/2 – 14 AGR-04-08-SS 84112-0804

5/16 1/4 1/4 – 19

5/16 3/8 3/8 – 19 AGR-05-06-SS 84112-0605 AGR-F-05-06-SS 84212-0605

3/8 1/4 1/4 – 19 AGR-06-04-SS 84112-0406

3/8 3/8 3/8 – 19 AGR-06-06-SS 84112-0606 AGR-F-06-06-SS 84212-0606

3/8 1/2 1/2 – 14 AGR-06-08-SS 84112-0806 AGR-F-06-08-SS 84212-0806

1/2 1/4 1/4 – 19 AGR-08-04-SS 84112-0408

1/2 3/8 3/8 – 19 AGR-08-06 SS 84112-0608

1/2 1/2 1/2 – 14 AGR-08-08-SS 84112-0808 AGR-F-08-08-SS 84212-0808

1/2 5/8 5/8 – 14 AGR-08-10-SS 84112-1008

1/2 3/4 3/4 – 14 AGR-08-12-SS 84112-1208

5/8 5/8 5/8 – 14 AGR-10-10-SS 84112-1010 AGR-F-10-10-SS 84212-1010

5/8 3/4 3/4 – 14 AGR-10-12-SS 84112-1210

3/4 3/4 3/4 – 14 AGR-12-12-SS 84112-1212 AGR-F-12-12-SS 84212-1212

3/4 1 1 – 11 AGR-12-16-SS 84112-1612 AGR-F-12-16-SS 84212-1612

1 1 1 – 11 AGR-16-16-SS 84112-1616 AGR-F-16-16-SS 84212-1616

41 1-1/4 1 / – 11 AGR-16-20-SS 84112-2016 AGR-F-16-20-SS 84212-20161

41-1/4 1-1/4 1 / – 11 AGR-20-20-SS 84112-2020 AGR-F-20-20-SS 84212-20201

21-1/2 1-1/2 1 / – 11 AGR-20-24-SS 84112-24201

21-1/2 1-1/2 1 / – 11 AGR-24-24-SS 84112-2424 AGR-F-24-24-SS 84212-24241

2 2 2 – 11 AGR-32-32-SS 84112-3232 AGR-F-32-32-SS 84212-3232

Page 29: WFA Hose Fittings

Page 22 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel NPT & BSPT Hose Fittings

Hose

Size

Nom inal

Thread

NPT Male BSPT Male Tapered

NPT Thread Model Number

Part Number

BSPTThread

ModelNumber

PartNumber

3/16 1/8 1/8 - 27 AGN-03-02-SS 84161-0203 1/8 - 28 AGR-K-03-02-SS 84114-0203

3/16 1/4 1/4 - 18 AGN-03-04-SS 84161-0403

1/4 1/8 1/8 - 27 AGN-04-02-SS 84161-0204 1/8 - 27 AGR-K-04-02SS 84114-0204

1/4 1/4 1/4 - 18 AGN-04-04-SS 84161-0404 1/4 - 18 AGR-K-04-04-SS 84114-0404

1/4 3/8 3/8 - 18 AGN-04-06-SS 84161-0604 3/8 - 18 AGR-K-04-06-SS 84114-0604

5/16 1/4 1/4 - 18 AGN-05-04-SS 84161-0405 1/4 - 18 AGR-K-05-04SS 84114-0405

5/16 3/8 3/8 - 18 AGN-05-06-SS 84161-0605 3/8 - 18 AGR-K-05-06-SS

3/8 1/4 1/4 - 18 AGN-06-04-SS 84161-0406 1/4 - 18 AGR-K-06-04-SS 84114-0406

3/8 3/8 3/8 - 18 AGN-06-06-SS 84161-0606 3/8 - 18 AGR-K-06-06-SS 84114-0606

3/8 1/2 1/2 - 14 AGN-06-08-SS 84161-0806 1/2 - 14 AGR-K-06-08-SS 84114-0806

1/2 3/8 3/8 - 18 AGN-08-06-SS 84161-0608

1/2 1/2 1/2 - 14 AGN-08-08-SS 84161-0808 1/2 - 14 AGR-K-08-08-SS 84114-0808

1/2 5/8 5/8 - 14 AGR-K-08-10-SS 84114-1008

1/2 3/4 3/4 - 14 AGN-08-12-SS 84161-1208 3/4 - 14 AGR-K-08-12-SS 84114-1208

5/8 1/2 1/2 - 14 AGN-10-08-SS 84161-0810

5/8 5/8 5/8 - 14 AGN-10-10-SS 84161-1010 5/8 - 14 AGR-K-10-10-SS 84114-1010

5/8 3/4 3/4 - 14 AGN-10-12-SS 84161-1210 3/4 - 14 AGR-K-10-12-SS 84114-1210

3/4 3/4 3/4 - 14 AGN-12-12-SS 84161-1212 3/4 - 14 AGR-K-12-12-SS 84114-1212

3/4 1" 1 - 11.5 AGN-12-16-SS 84161-1612 1 - 11 AGR-K-12-16-SS 84114-1612

1" 1" 1 - 11.5 AGN-16-16-SS 84161-1616 1 - 11 AGR-K-16-16-SS 84114-1616

4 41" 1-1/4 1 / - 11.5 AGN-16-20-SS 84161-2016 1 / - 11 AGR-K-16-20-SS 84114-20161 1

4 41-1/4 1-1/4 1 / - 11.5 AGN-20-20-SS 84161-2020 1 / - 11 AGR-K-20-20-SS 84114-20201 1

2 21-1/4 1-1/2 1 / - 11.5 AGN-20-24-SS 84161-2420 1 / - 11 AGR-K-20-24-SS 84114-24201 1

2 21-1/2 1-1/2 1 / - 11.5 AGN-24-24-SS 84161-2424 1 / - 11 AGR-K-24-24-SS 84114-24241 1

2" 2" 2 - 11.5 AGN-32-32-SS 84161-3232 2 - 11 AGR-K-32-32-SS 84114-3232

Page 30: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 23 of 39

Stainless Steel BSP Hose Fittings

BSPP Swivel Female BSPP Swivel Female Flat Seat

HoseSize

BSPSize

ThreadSize

ModelNumber

PartNumber

ModelNumber

PartNumber

3/16 1/8 1/8 – 28 DKR-03-02-SS 84100-0203

3/16 1/4 1/4 – 19 DKR-03-04-SS 84100-0403

1/4 1/8 1/8 – 28 DKR-04-02-SS 84100-0204

1/4 1/4 1/4 – 19 DKR-04-04-SS 84100-0404 DKR-F-04-04-SS 84200-0404

1/4 3/8 3/8 – 19 DKR-04-06-SS 84100-0604 DKR-F-04-06-SS 84200-0604

1/4 1/2 1/2 – 14 DKR-F-04-08-SS 84200-0804

5/16 1/4 1/4 – 19 DKR-05-04-SS 84100-0405

5/16 3/8 3/8 – 19 DKR-05-06-SS 84100-0605 DKR-F-05-06-SS 84200-0605

3/8 3/8 3/8 – 19 DKR-06-06-SS 84100-0606 DKR-F-06-06-SS 84200-0606

3/8 1/2 1/2 – 14 DKR-06-08-SS 84100-0806 DKR-F-06-08-SS 84200-0806

1/2 3/8 3/8 – 19 DKR-F-08-06-SS 84200-0608

1/2 1/2 1/2 – 14 DKR-08-08-SS 84100-0808 DKR-F-08-08-SS 84200-0808

1/2 5/8 5/8 – 14 DKR-08-10-SS 84100-1008

1/2 3/4 3/4 – 14 DKR-08-12-SS 84100-1208 DKR-F-08-12-SS 84200-1208

5/8 1/2 1/2 – 14 DKR-10-08-SS 84100-0810

5/8 5/8 5/8 – 14 DKR-10-10-SS 84100-1010

5/8 3/4 3/4 – 14 DKR-10-12-SS 84100-1210 DKR-F-10-12-SS 84200-1210

3/4 3/4 3/4 – 14 DKR-12-12-SS 84100-1212 DKR-F-12-12-SS 84200-1212

3/4 1" 1 – 11 DKR-12-16-SS 84100-1612

1" 1" 1 – 11 DKR-16-16-SS 84100-1616 DKR-F-16-16-SS 84200-1616

1" 1-1/441 / – 111 DKR-16-20-SS 84100-2016

1-1/4 1-1/441 / – 111 DKR-20-20-SS 84100-2020 DKR-F-20-20-SS 84200-2020

1-1/4 1-1/221 / – 111 DKR-20-24-SS 84100-2420

1-1/2 1-1/221 / – 111 DKR-24-24-SS 84100-2424 DKR-F-24-24-SS 84200-2424

1-1/2 2" 2 – 11 DKR-24-32-SS 84100-3224

2" 2" 2 – 11 DKR-32-32-SS 84100-3232 DKR-F-32-32-SS 84200-3232

The flat seat BSPP fittings are most often seen on HIAB cranes.

Page 31: WFA Hose Fittings

Page 24 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel BSP Hose Fittings

BSPP Swivel Female 45E Elbow BSPP Swivel Female 90E Elbow

HoseSize

BSPSize

ThreadSize

ModelNumber

PartNumber

ModelNumber

PartNumber

3/16 1/4 1/4 – 19 DKR-45-03-04-SS 84108-0403 DKR-90-03-04-SS 84107-0403

1/4 1/4 1/4 – 19 DKR-45-04-04-SS 84108-0404 DKR-90-04-04-SS 84107-0404

1/4 3/8 3/8 – 19 DKR-45-04-06-SS 84108-0604 DKR-90-04-06-SS 84107-0604

1/4 1/2 1/4 – 14 DKR-90-04-08-SS 84107-0804

5/16 3/8 3/8 – 19 DKR-45-05-06-SS 84108-0605 DKR-90-05-06-SS 84107-0605

3/8 3/8 3/8 – 19 DKR-45-06-06-SS 84108-0606 DKR-90-06-06-SS 84107-0606

3/8 1/2 1/2 – 14 DKR-45-06-08-SS 84108-0806 DKR-90-06-08-SS 84107-0806

1/2 1/2 1/2 – 14 DKR-45-08-08-SS 84108-0808 DKR-90-08-08-SS 84107-0808

1/2 3/4 3/4 – 14 DKR-90-08-12-SS 84107-1208

5/8 5/8 5/8 – 14 DKR-45-10-10-SS 84108-1010 DKR-90-10-10-SS 84107-1010

5/8 3/4 3/4 – 14 DKR-45-10-12-SS 84108-1210 DKR-90-10-12-SS 84107-1210

3/4 3/4 3/4 – 14 DKR-45-12-12-SS 84108-1212 DKR-90-12-12-SS 84107-1212

3/4 1" 1 – 11 DKR-45-12-16-SS 84108-1612 DKR-90-12-16-SS 84107-1612

1" 1" 1 – 11 DKR-45-16-16-SS 84108-1616 DKR-90-16-16-SS 84107-1616

1-1/4 1-1/441 / – 111 DKR-45-20-20-SS 84108-2020 DKR-90-20-20-SS 84107-2020

1-1/2 1-1/221 / – 111 DKR-45-24-24-SS 84108-2424 DKR-90-24-24-SS 84107-2424

2" 2" 2 – 11 DKR-45-32-32-SS 84108-3232 DKR-90-32-32-SS 84107-3232

Page 32: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 25 of 39

Stainless Steel Metric Standpipe Hose Fittings

Metric Standpipe Straight Metric Standpipe 45E Elbow

Metric Standpipe 90E Elbow

HoseSize

StandpipeSize

ModelNumber

PartNumber

ModelNumber

PartNumber

ModelNumber

PartNumber

3/16 6mm BEM-03-06-SS 84158-0603 BEM-45-03-06-SS 84358-0603 BEM-90-03-06-SS 84258-0603

3/16 8mm BEM-03-08-SS 84158-0803 BEM-90-03-08-SS 84258-0803

1/4 6mm BEM-04-06-SS 84158-0604 BEM-45-04-06-SS 84358-0604 BEM-90-04-06-SS 84258-0604

1/4 8mm BEM-04-08-SS 84158-0804 BEM-45-04-08-SS 84358-0804 BEM-90-04-08-SS 84258-0804

1/4 10mm BEM-04-10-SS 84158-1004 BEM-45-04-10-SS 84358-1004 BEM-90-04-10-SS 84258-1004

1/4 12mm BEM-04-12-SS 84158-1204 BEM-90-04-12-SS 84258-1204

5/16 8mm BEM-90-05-08-SS 84258-0805

5/16 10mm BEM-05-10-SS 84158-1005 BEM-45-05-10-SS 84358-1005 BEM-90-05-10-SS 84258-1005

5/16 12mm BEM-05-12-SS 84158-1205 BEM-45-05-12-SS 84358-1205 BEM-90-05-12-SS 84258-1205

3/8 8mm BEM-06-08-SS 84158-0806

3/8 10mm BEM-06-10-SS 84158-1006 BEM-45-06-10-SS 84358-1006 BEM-90-06-10-SS 84258-1006

3/8 12mm BEM-06-12-SS 84158-1206 BEM-45-06-12-SS 84358-1206 BEM-90-06-12-SS 84258-1206

3/8 14mm BEM-06-14-SS 84158-1406 BEM-45-06-14-SS 84358-1406 BEM-90-06-14-SS 84258-1406

3/8 15mm BEM-06-15-SS 84158-1506 BEM-90-06-15-SS 84258-1506

1/2 12mm BEM-08-12-SS 84158-1208

1/2 14mm BEM-08-14-SS 84158-1408 BEM-45-08-14-SS 84358-1408 BEM-90-08-14-SS 84258-1408

1/2 15mm BEM-08-15-SS 84158-1508 BEM-45-08-15-SS 84358-1508 BEM-90-08-15-SS 84258-1508

1/2 16mm BEM-08-16-SS 84158-1608 BEM-45-08-16-SS 84358-1608 BEM-90-08-16-SS 84258-1608

1/2 18mm BEM-08-18-SS 84158-1808 BEM-90-08-18-SS 84258-1808

5/8 18mm BEM-10-18-SS 84158-1810 BEM-45-10-18-SS 84358-1810 BEM-90-10-18-SS 84258-1810

5/8 20mm BEM-10-20-SS 84158-2010 BEM-45-10-20-SS 84358-2010 BEM-90-10-20-SS 84258-2010

5/8 22mm BEM-10-22-SS 84158-2210

3/4 18mm BEM-12-18-SS 84158-1812

3/4 20mm BEM-12-20-SS 84158-2012 BEM-45-12-20-SS 84358-2012 BEM-90-12-20-SS 84258-2012

3/4 22mm BEM-12-22-SS 84158-2212 BEM-45-12-22-SS 84358-2212 BEM-90-12-22-SS 84258-2212

3/4 25mm BEM-12-25-SS 84158-2512 BEM-45-12-25-SS 84358-2512 BEM-90-12-25-SS 84258-2512

1" 25mm BEM-16-25-SS 84158-2516

1" 28mm BEM-16-28-SS 84158-2816 BEM-90-16-28-SS 84258-2816

1" 30mm BEM-16-30-SS 84158-3016 BEM-90-16-30-SS 84258-3016

1-1/4 35mm BEM-20-35-SS 84158-3520 BEM-90-20-35-SS 84258-3520

1-1/4 38mm BEM-20-38-SS 84158-3820 BEM-90-20-38-SS 84258-3820

1-1/2 42mm BEM-24-42-SS 84158-4224 BEM-90-24-42-SS 84258-4224

Standpipes are most often used to connect hose to DIN 2353 tube fittings.

This is a convenient way to combine hose and tubing in an installation.

Page 33: WFA Hose Fittings

Page 26 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)

Metric Male 24E Female Swivel 24E with O-Ring

Hose

Size

Tube

Size

Thread

SizeModel Number Part Number Model Number Part Number

3/16 6-L M12x1.5 DKOL-03-12-SS 84804-120603

1/4 6-L M12x1.5 CEL-04-12-SS 84203-120604 DKOL-04-12-SS 84804-120604

1/4 8-L M14x1.5 CEL-04-14-SS 84203-140804 DKOL-04-14-SS 84804-140804

1/4 10-L M16x1.5 CEL-04-16-SS 84203-161004 DKOL-04-16-SS 84804-161004

1/4 12-L M18x1.5 CEL-04-18-SS 84203-181204 DKOL-04-18-SS 84804-181204

5/16 10-L M16x1.5 CEL-05-16-SS 84203-161005 DKOL-05-16-SS 84804-161005

5/16 12-L M18x1.5 CEL-05-18-SS 84203-181205 DKOL-05-18-SS 84804-181205

3/8 10-L M16x1.5 CEL-06-16-SS 84203-161006 DKOL-06-16-SS 84804-161006

3/8 12-L M18x1.5 CEL-06-18-SS 84203-181206 DKOL-06-18-SS 84804-181206

3/8 15-L M22x1.5 DKOL-06-22-SS 84804-221506

1/2 15-L M22x1.5 CEL-08-22-SS 84203-221508 DKOL-08-22-SS 84804-221508

1/2 18-L M26x1.5 CEL-08-26-SS 84203-261808 DKOL-08-26-SS 84804-261808

5/8 18-L M26x1.5 CEL-10-26-SS 84203-261810 DKOL-10-26-SS 84804-261810

3/4 22-L M30x2 CEL-12-30-SS 84203-302212 DKOL-12-30-SS 84804-302212

1" 28-L M36x2 CEL-16-36-SS 84203-362816 DKOL-16-36-SS 84804-362816

1-1/4 35-L M45x2 CEL-20-45-SS 84203-453520 DKOL-20-45-SS 84804-453520

1-1/2 42-L M52x2 CEL-24-52-SS 84203-524224 DKOL-24-52-SS 84804-524224

2" 42-L M52x2 DKOL-32-52-SS 84804-524232

Page 34: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 27 of 39

Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (L Series, 24E Cone)

Female Swivel 24E 45E Elbow & O-Ring

Female Swivel 24E 90EElbow & O-Ring

Hose

Size

Tube

Size

Thread

SizeModel Number Part Number Model Number Part Number

3/16 6-L M12x1.5 DKOL-45-03-12-SS 84306-120603

1/4 6-L M12x1.5 DKOL-45-04-12-SS 84306-120604 DKOL-90-04-12-SS 84305-120604

1/4 8-L M14x1.5 DKOL-45-04-14-SS 84306-140804 DKOL-90-04-14-SS 84305-140804

1/4 10-L M16x1.5 DKOL-45-04-16-SS 84306-161004 DKOL-90-04-16-SS 84305-161004

5/16 10-L M16x1.5 DKOL-45-05-16-SS 84306-161005 DKOL-90-05-16-SS 84305-161005

5/16 12-L M18x1.5 DKOL-90-05-18-SS 84305-181205

3/8 10-L M16x1.5 DKOL-45-06-16-SS 84306-161006 DKOL-90-06-16-SS 84305-161006

3/8 12-L M18x1.5 DKOL-45-06-18-SS 84306-181206 DKOL-90-06-18-SS 84305-181206

1/2 15-L M22x1.5 DKOL-45-08-22-SS 84306-221508 DKOL-90-08-22-SS 84305-221508

5/8 18-L M26x1.5 DKOL-45-10-26-SS 84306-261810 DKOL-90-10-26-SS 84305-261810

3/4 22-L M30x2 DKOL-45-12-30-SS 84306-302212 DKOL-90-12-30-SS 84305-302212

1" 28-L M36x2 DKOL-45-16-36-SS 84306-362816 DKOL-90-16-36-SS 84305-362816

1-1/4 35-L M45x2 DKOL-45-20-45-SS 84306-453520 DKOL-90-20-45-SS 84305-453520

1-1/2 42-L M52x2 DKOL-45-24-52-SS 84306-584224 DKOL-90-24-52-SS 84305-584224

Page 35: WFA Hose Fittings

Page 28 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel Hose Fittings for DIN 2353 Tube Fittings (S Series, 24E Cone)

Metric Male 24E Female Swivel 24E with O-Ring

Hose

Size

Tube

Size

Thread

SizeModel Number Part Number Model Number Part Number

1/4 8-S M16x1.5 CES-04-16-SS 84203-160804 DKOS-04-16-SS 84804-160804

1/4 10-S M18x1.5 CES-04-18-SS 84203-181004 DKOS-04-18-SS 84804-181004

5/16 10-S M18x1.5 CES-05-18-SS 84203-181005

5/16 12-S M20x1.5 CES-05-20-SS 84203-201205 DKOS-05-20-SS 84804-201205

3/8 10-S M18x1.5 CES-06-18-SS 84203-181006

3/8 12-S M20x1.5 CES-06-20-SS 84203-201206 DKOS-06-20-SS 84804-201206

3/8 14-S M22x1.5 CES-06-22-SS 84203-221406 DKOS-06-22-SS 84804-221406

1/2 14-S M22x1.5 CES-08-22-SS 84203-221408

1/2 16-S M24x1.5 CES-08-24-SS 84203-241608 DKOS-08-24-SS 84804-241608

5/8 20-S M30x2 CES-10-30-SS 84203-302010 DKOS-10-30-SS 84804-302010

3/4 30-S M30x2 CES-12-30-SS 84203-302012 DKOS-12-30-SS 84804-302012

3/4 25-S M36x2 CES-12-36-SS 84203-362512 DKOS-12-36-SS 84804-362512

1" 25-S M36x2 CES-16-36-SS 84203-362516 DKOS-16-36-SS 84804-362516

1" 30-S M42x2 CES-16-42-SS 84203-423016 DKOS-16-42-SS 84804-423016

1-1/4 38-S M52x2 CES-20-52-SS 84203-423820 DKOS-20-52-SS 84804-523820

Female Swivel 24E 45E Elbow & O-Ring Female Swivel 24E 90E Elbow & O-Ring

Hose

Size

Tube

Size

Thread

SizeModel Number Part Number Model Number Part Number

1/4 6-S M14x1.5 DKOS-45-04-14-SS 84306-140604 DKOS-90-04-14-SS 84305-140604

1/4 8-S M16x1.5 DKOS-45-04-16-SS 84306-160804 DKOS-90-04-16-SS 84305-160804

1/4 10-S M18x1.5 DKOS-45-04-18-SS 84306-181004 DKOS-90-04-18-SS 84305-181004

5/16 12-S M20x1.5 DKOS-45-05-20-SS 84306-201205 DKOS-90-05-20-SS 84305-201205

3/8 12-S M20x1.5 DKOS-45-06-20-SS 84306-201206 DKOS-90-06-20-SS 84305-201206

3/8 14-S M22x1.5 DKOS-45-06-22-SS 84306-221406 DKOS-90-06-22-SS 84305-221406

1/2 16-S M24x1.5 DKOS-45-08-24-SS 84306-241608 DKOS-90-08-24-SS 84305-241608

5/8 20-S M30x2 DKOS-45-10-30-SS 84306-302010 DKOS-90-10-30-SS 84305-302010

3/4 20-S M30X2 DKOS-45-12-30-SS 84306-302012 DKOS-90-12-30-SS 84305-302012

3/4 25-S M36x2 DKOS-45-12-36-SS 84306-362512 DKOS-90-12-36-SS 84305-362512

1" 25-S M36x2 DKOS-45-16-36-SS 84306-362516 DKOS-90-16-36-SS 84305-362516

1" 30-S M42x2 DKOS-45-16-42-SS 84306-423016 DKOS-90-16-42-SS 84305-423016

1-1/4 38-S M50x2 DKOS-45-20-52-SS 84306-523820 DKOS-90-20-52-SS 84305-523820

Page 36: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 29 of 39

Stainless Steel JIC Hose Fittings

Male JIC Female JIC

HoseSize

ThreadSize

Model Number Part Number Model Number Part Number

3/16 7/16 – 20 DKJ-03-04-SS 84142-0703

1/4 7/16 – 20 AGJ-04-04-SS 84140-0704 DKJ-04-04-SS 84142-0704

1/4 1/2 – 20 AGJ-04-05-SS 84140-0804 DKJ-04-05-SS 84142-0804

1/4 9/16 – 18 AGJ-04-06-SS 84140-0904 DKJ-04-06-SS 84142-0904

1/4 3/4 – 16 AGJ-04-08-SS 84140-1204

5/16 1/2 – 20 AGJ-05-05-SS 84140-0805 DKJ-05-05-SS 84142-0805

5/16 9/16 – 18 AGJ-05-06-SS 84140-0905 DKJ-05-06-SS 84142-0905

3/8 9/16 – 18 AGJ-06-06-SS 84140-0906 DKJ-06-06-SS 84142-0906

3/8 3/4 – 16 AGJ-06-08-SS 84140-1206 DKJ-06-08-SS 84142-1206

3/8 7/8 – 14 AGJ-06-10-SS 84140-1406 DKJ-06-10-SS 84142-1406

1/2 3/4 – 16 AGJ-08-08-SS 84140-1208 DKJ-08-08-SS 84142-1208

1/2 7/8 – 14 AGJ-08-10-SS 84140-1408 DKJ-08-10-SS 84142-1408

161/2 1 / – 12 DKJ-08-12-SS 84142-17081

5/8 7/8 – 14 AGJ-10-10-SS 84140-1410 DKJ-10-10-SS 84142-1410

165/8 1 / – 12 AGJ-10-12-SS 84140-1710 DKJ-10-12-SS 84142-17101

163/4 1 / – 12 AGJ-12-12-SS 84140-1712 DKJ-12-12-SS 84142-17121

163/4 1 / – 12 AGJ-12-16-SS 84140-2112 DKJ-12-16-SS 84142-21125

161" 1 / – 12 AGJ-16-12-SS 84140-1716 DKJ-16-12-SS 84142-17161

161" 1 / – 12 AGJ-16-16-SS 84140-2116 DKJ-16-16-SS 84142-21165

81" 1 / – 12 AGJ-16-20-SS 84140-2616 DKJ-16-20-SS 84142-26165

81-1/4 1 / – 12 AGJ-20-20-SS 84140-2620 DKJ-20-20-SS 84142-26205

81-1/2 1 / – 12 AGJ-24-24-SS 84140-3024 DKJ-24-24-SS 84142-30247

22" 2 / – 12 AGJ-32-32-SS 84140-4032 DKJ-32-32-SS 84142-40321

Page 37: WFA Hose Fittings

Page 30 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel JIC Hose Fittings

Female JIC 45E Female JIC 90E

HoseSize

ThreadSize

Model Number Part Number Model Number Part Number

3/16 7/16 – 20 DKJ-45-03-04-SS 84139-0703 DKJ-90-03-04-SS 84138-0703

1/4 7/16 – 20 DKJ-45-04-04-SS 84139-0704 DKJ-90-04-04-SS 84138-0704

1/4 1/2 – 20 DKJ-45-04-05-SS 84139-0804 DKJ-90-04-05-SS 84138-0804

1/4 9/16 – 18 DKJ-45-04-06-SS 84139-0904 DKJ-90-04-06-SS 84138-0904

5/16 1/2 – 20 DKJ-45-05-05-SS 84139-0805 DKJ-90-05-05-SS 84138-0805

5/16 9/16 – 18 DKJ-45-05-06-SS 84139-0905 DKJ-90-05-06-SS 84138-0905

3/8 9/16 – 18 DKJ-45-06-06-SS 84139-0906 DKJ-90-06-06-SS 84138-0906

3/8 3/4 – 16 DKJ-45-06-08-SS 84139-1206 DKJ-90-06-08-SS 84138-1206

3/8 7/8 – 14 DKJ-45-06-10-SS 84139-1406 DKJ-90-06-10-SS 84138-1406

1/2 3/4 – 16 DKJ-45-08-08-SS 84139-1208 DKJ-90-08-08-SS 84138-1208

1/2 7/8 – 14 DKJ-45-08-10-SS 84139-1408 DKJ-90-08-10-SS 84138-1408

5/8 7/8 – 14 DKJ-45-10-10-SS 84139-1410 DKJ-90-10-10-SS 84138-1410

165/8 1 / – 12 DKJ-45-10-12-SS 84139-1710 DKJ-90-10-12-SS 84138-17101

163/4 1 / – 12 DKJ-45-12-12-SS 84139-1712 DKJ-90-12-12-SS 84138-17121

163/4 1 / – 12 DKJ-45-12-16-SS 84139-2112 DKJ-90-12-16-SS 84138-21125

161" 1 / – 12 DKJ-45-16-16-SS 84139-2116 DKJ-90-16-16-SS 84138-21165

81" 1 / – 12 DKJ-45-16-20-SS 84139-2616 DKJ-90-16-20-SS 84138-26165

81-1/4 1 / – 12 DKJ-45-20-20-SS 84139-2620 DKJ-90-20-20-SS 84138-26205

81-1/4 1 / – 12 DKJ-45-20-24-SS 84139-3020 DKJ-90-20-24-SS 84138-30207

81-1/2 1 / – 12 DKJ-45-24-24-SS 84139-3024 DKJ-90-24-24-SS 84138-30247

22" 2 / – 12 DKJ-45-32-32-SS 84139-4032 DKJ-90-32-32-SS 84138-40321

Page 38: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 31 of 39

Stainless Steel Code 61Flange

Code 61 Flange Code 61 Flange 45E

HoseSize

FlangeSize

Model Number Part Number Model Number Part Number

1/2 1/2 FL3-08-08-SS 84182-0808 FL3-45-08-08-SS 84184-0808

1/2 3/4 FL3-08-12-SS 84182-1208 FL3-45-08-12-SS 84184-1208

5/8 3/4 FL3-10-12-SS 84182-1210 FL3-45-10-12-SS 84184-1210

3/4 3/4 FL3-12-12-SS 84182-1212 FL3-45-12-12-SS 84184-1212

3/4 1" FL3-12-16-SS 84182-1612 FL3-45-12-16-SS 84184-1612

1" 1" FL3-16-16-SS 84182-1616 FL3-45-16-16-SS 84184-1616

1" 1-1/4 FL3-16-20-SS 84182-2016 FL3-45-16-20-SS 84184-2016

1-1/4 1-1/4 FL3-20-20-SS 84182-2020 FL3-45-20-20-SS 84184-2020

1-1/4 1-1/2 FL3-20-24-SS 84182-2420 FL3-45-20-24-SS 84184-2420

1-1/2 1-1/2 FL3-24-24-SS 84182-2424 FL3-45-24-24-SS 84184-2424

1-1/2 2" FL3-24-32-SS 84182-3224 FL3-45-24-32-SS 84184-3224

2" 2" FL3-32-32-SS 84182-3232 FL3-45-32-32-SS 84184-3232

Code 61 Flange 90E

HoseSize

FlangeSize

Model Number Part Number

1/2 1/2 FL3-90-08-08-SS 84182-0808

1/2 3/4 FL3-90-08-12-SS 84182-1208

5/8 3/4 FL3-90-10-12-SS 84182-1210

3/4 3/4 FL3-90-12-12-SS 84182-1212

3/4 1" FL3-90-12-16-SS 84182-1612

1" 1" FL3-90-16-16-SS 84182-1616

1" 1-1/4 FL3-90-16-20-SS 84182-2016

1-1/4 1-1/4 FL3-90-20-20-SS 84182-2020

1-1/4 1-1/2 FL3-90-20-24-SS 84182-2420

1-1/2 1-1/2 FL3-90-24-24-SS 84182-2424

1-1/2 2" FL3-90-24-32-SS 84182-3224

2" 2" FL3-90-32-32-SS 84182-3232

Page 39: WFA Hose Fittings

Page 32 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Stainless Steel Code 62 Flange

Code 62 Flange Code 62 Flange 45E

HoseSize

FlangeSize

Model Number Part Number Model Number Part Number

1/2 1/2 FL6-08-08-SS 84282-0808 FL6-45-08-08-SS 84284-0808

1/2 3/4 FL6-08-12-SS 84282-1208 FL6-45-08-12-SS 84284-1208

5/8 3/4 FL6-10-12-SS 84282-1210 FL6-45-10-12-SS 84284-1210

3/4 3/4 FL6-12-12-SS 84282-1212 FL6-45-12-12-SS 84284-1212

3/4 1" FL6-12-16-SS 84282-1612 FL6-45-12-16-SS 84284-1612

1" 1" FL6-16-16-SS 84282-1616 FL6-45-16-16-SS 84284-1616

1" 1-1/4 FL6-16-20-SS 84282-2016 FL6-45-16-20-SS 84284-2016

1-1/4 1-1/4 FL6-20-20-SS 84282-2020 FL6-45-20-20-SS 84284-2020

1-1/4 1-1/2 FL6-20-24-SS 84282-2420 FL6-45-20-24-SS 84284-2420

1-1/2 1-1/2 FL6-24-24-SS 84282-2424 FL6-45-24-24-SS 84284-2424

1-1/2 2" FL6-24-32-SS 84282-3224 FL6-45-24-32-SS 84284-3224

2" 2" FL6-32-32-SS 84282-3232 FL6-45-32-32-SS 84284-3232

Code 62 Flange 90E

HoseSize

ThreadSize

Model Number Part Number

1/2 1/2 FL6-90-08-08-SS 84283-0808

1/2 3/4 FL6-90-08-12-SS 84283-1208

5/8 3/4 FL6-90-10-12-SS 84283-1210

3/4 3/4 FL6-90-12-12-SS 84283-1212

3/4 1" FL6-90-12-16-SS 84283-1612

1" 1" FL6-90-16-16-SS 84283-1616

1" 1-1/4 FL6-90-16-20-SS 84283-2016

1-1/4 1-1/4 FL6-90-20-20-SS 84283-2020

1-1/4 1-1/2 FL6-90-20-24-SS 84283-2420

1-1/2 1-1/2 FL6-90-24-24-SS 84283-2424

1-1/2 2" FL6-90-24-32-SS 84283-3224

2" 2" FL6-90-32-32-SS 84283-3232

Page 40: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 33 of 39

Miscellaneous Stainless Steel Hose Fittings

Banjo Hose End Hollow Bolt

HoseSize

BoltSize

RNM / RNRBolt

Thread

F15

Model Number Part Number Model Number Part Number

1/4 M12 RNM-04-12-SS 84116-1204 M12 X 1.5 F15 M12X1.5 SS Z1092 12

1/4 M14 RNM-04-14-SS 84116-1404 M14 X 1.5 F15 M14X1.5 SS Z1092 14

5/16 M16 RNM-05-16-SS 84116-1605 M16 X 1.5 F15 M16X1.5 SS Z1092 16

3/8 M14 RNM-06-14-SS 84116-1406 M18 X 1.5 F15 M18X1.5 SS Z1092 18

3/8 M16 RNM-06-16-SS 84116-1606 M20 X 1.5 F15 M20X1.5 SS

3/8 M18 RNM-06-18-SS 84116-1806 M22 X 1.5 F15 M22X1.5 SS Z1092 22

1/2 M18 RNM-08-18-SS 84116-1808 M26 X 1.5 F15 M26X1.5 SS Z1092 26

1/2 M20 RNM-08-20-SS 84116-2008 M30 X 1.5 F15 M30X1.5 SS Z1092 30

1/2 M22 RNM-08-22-SS 84116-2208

3/4 M26 RNM-12-26-SS 84116-2612

3/4 M30 RNM-12-30-SS 84116-3012

1/4 1/4 BSP RNR-04-04-SS 84111-0404 1/4 BSPP F15 R1/4 SS Z1090 04

5/16 3/8 BSP RNR-05-06-SS 84111-0605 3/8 BSPP F15 R3/8 SS Z1090 06

3/8 3/8 BSP RNR-06-06-SS 84111-0606 1/2 BSPP F15 R1/2 SS Z1090 08

3/8 1/2 BSP RNR-06-08-SS 84111-0806 3/4 BSPP F15 R3/4 SS Z1090 12

1/2 3/8 BSP RNR-08-06-SS 84111-0608 1 BSPP F15 R1 SS Z1090 16

1/2 1/2 BSP RNR-08-08-SS 84111-0808

3/4 3/4 BSP RNR-08-12-SS 84111-0812

3/4 3/4 BSP RNR-12-12-SS 84111-1212

1" 1" BSP RNR-16-16SS 84111-1616

Page 41: WFA Hose Fittings

Page 34 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

316SS Interlock Crimp Ferrules / 316SS Interlock NPT Hose Fittings

Crimp Ferrule 4SH Hose Interlock Crimp Ferrule 100R13 Hose Interlock

Hose I.D. Model Number Part Number Model Number Part Number

3/4 HPF-4SH-12 ZA61010-1200 HPF-13-12 ZA61010-1200

1" HPF-4SH-16 ZA61010-1600 HPF-13-16 ZA61010-1600

1-1/4 HPF-4SH-20 ZA61010-2000 HPF-13-20 Z61010-2000

1-1/2 HPF-4SH-24 ZA61010-2400 HPF-13-24 Z61010-2400

2" HPF-4SH-32 ZA61010-3200 HPF-13-32 Z61010-3200

Male NPT Interlock

Hose I.D. NPT Thread Size Model Number Part Number

3/4 3/4 -14 HAGN-12-12-SS Z64161-1212

1 1 - 11.5 HAGN-16-16-SS Z64161-1616

41-1/4 1 / - 11.5 HAGN-20-20-SS Z64161-20201

21-1/2 1 / - 11.5 HAGN-24-24-SS Z64161-24241

2 2 - 11.5 HAGN-32-32-SS Z64161-3232

Page 42: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 35 of 39

316SS Interlock BSPP Hose Fittings

0

Male BSPP Interlock Female BSPP Interlock

HoseI.D.

BSPPThread

Model Number Part Number Model Number Part Number

3/4 3/4 - 14 HAGR-12-12-SS Z64112-1212 HDKR-12-12-SS Z64100-1212

1" 1 - 11 HAGR-16-16-SS Z64112-1616 HDKR-16-16-SS Z64100-1616

41-1/4 1 / - 11 HAGR-20-20-SS Z64112-2020 HDKR-20-20-SS Z64100-20201

21-1/2 1 / - 11 HAGR-24-24-SS Z64112-2424 HDKR-24-24-SS Z64100-24241

2" 2 - 11 HAGR-32-32-SS Z64112-3232 HDKR-32-32-SS Z64100-3232

v

0

Female BSPP 45E Interlock Female BSPP 90E Interlock

HoseI.D.

BSPPThread

Model Number Part Number Model Number Part Number

3/4 3/4 - 14 HDKR-45-12-12-SS Z64108-1212 HDKR-90-12-12-SS Z64107-1212

1" 1 - 11 HDKR-45-16-16-SS Z64108-1616 HDKR-90-16-16-SS Z64107-1616

41-1/4 1 / - 11 HDKR-45-20-20-SS Z64108-2020 HDKR-90-20-20-SS Z64107-20201

21-1/2 1 / - 11 HDKR-45-24-24-SS Z64108-2424 HDKR-90-24-24-SS Z64107-24241

2" 2 - 11 HDKR-45-32-32-SS Z64108-3232 HDKR-90-32-32-SS Z64107-3232

Page 43: WFA Hose Fittings

Page 36 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

316SS Interlock DIN2353 Hose Fittings

Male DIN2353 S Series Interlock Female DIN2353 Interlock

HoseI.D.

TubeSize

Thread Model Number Part Number Model Number Part Number

3/4 20-S M30x2 HCES-12-30-SS Z64203-302012 HDKOS-12-30-SS Z64204-302012

3/4 25-S M36x2 HCES-12-36-SS Z64203-362512 HDKOS-12-36-SS Z64204-362512

1" 30-S M42x2 HCES-16-42-SS Z64203-423016 HDKOS-16-42-SS Z64204-423016

1-1/4 38-S M52x2 HCES-20-52-SS Z64203-523820 HDKOS-20-52-SS Z64204-523820

Female DIN2353 45E Interlock Female DIN2353 90E Interlock

HoseI.D.

TubeSize

Thread Model Number Part Number Model Number Part Number

3/4 20-S M30x2 HDKOS-45-12-30-SS Z64206-302012 HDKOS-90-12-30-SS Z64205-302012

3/4 25-S M36x2 HDKOS-45-12-36-SS Z64206-362512 HDKOS-90-12-36-SS Z64205-362512

1" 30-S M42x2 HDKOS-45-16-42-SS Z64206-423016 HDKOS-90-16-42-SS Z64205-423016

1-1/4 38-S M52x2 HDKOS-45-20-52-SS Z64206-523820 HDKOS-90-20-52-SS Z64205-523820

Page 44: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 37 of 39

316SS Interlock JIC Hose Fittings

Male JIC Interlock Female JIC Interlock

HoseI.D.

TubeSize

Thread Model Number Part Number Model Number Part Number

163/4 3/4 1 / - 12 HAGJ-12-12-SS Z64140-1712 HDKJ-12-12-SS Z64142-17121

161" 1" 1 / - 12 HAGJ-16-16-SS Z64140-2116 HDKJ-16-16-SS Z64142-21165

81-1/4 1-1/4 1 / - 12 HAGJ-20-20-SS Z64140-2620 HDKJ-20-20-SS Z64142-26205

81-1/2 1-1/2 1 / - 12 HAGJ-24-24-SS Z64140-3024 HDKJ-24-24-SS Z64142-30247

22" 2" 2 / - 12 HAGJ-32-32-SS Z64140-40321 HDKJ-32-32-SS Z64142-4032

v

0

Female JIC 45E Interlock Female JIC 90E Interlock

HoseI.D.

TubeSize

Thread Model Number Part Number Model Number Part Number

163/4 3/4 1 / - 12 HDKJ-45-12-12-SS Z64139-17121 HDKJ-90-12-12-SS Z64138-1712

161" 1" 1 / - 12 HDKJ-45-16-16-SS5 Z64139-2116 HDKJ-90-16-16-SS Z64138-2116

81-1/4 1-1/4 1 / - 12 HDKJ-45-20-20-SS5 Z64139-2620 HDKJ-90-20-20-SS Z64138-2620

81-1/2 1-1/2 1 / - 12 HDKJ-45-24-24-SS7 Z64139-3024 HDKJ-90-24-24-SS Z64138-3024

Page 45: WFA Hose Fittings

Page 38 of 39Williams Fluidair Corporation Limited

1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

316SS Interlock Code 61 Flange Hose Fittings

0

Code 61 Flange Interlock Code 61 Flange 45E Interlock

HoseI.D.

FlangeSize

Model Number Part Number Model Number Part Number

3/4 3/4 HFL3-12-12-SS Z64182-1212 HFL3-45-12-12-SS Z64184-1212

3/4 1" HFL3-12-16-SS Z64182-1612 HFL3-45-12-16-SS Z64184-1612

1" 1" HFL3-16-16-SS Z64182-1616 HFL3-45-16-16-SS Z64184-1616

1" 1-1/4 HFL3-16-20-SS Z64182-2016 HFL3-45-16-20-SS Z64184-2016

1-1/4 1-1/4 HFL3-20-20-SS Z64182-2020 HFL3-45-20-20-SS Z64184-2020

1-1/4 1-1/2 HFL3-20-24-SS Z64182-2420 HFL3-45-20-24-SS Z64184-2420

1-1/2 1-1/2 HFL3-24-24-SS Z64182-2424

1-1/2 2" HFL3-24-32-SS Z64182-3224

2" 2" HFL3-32-32-SS Z64182-3232

v

Code 61 Flange 90E Interlock

HoseI.D.

FlangeSize

Model Number Part Number

3/4 3/4 HFL3-90-12-12-SS Z64183-1212

3/4 1" HFL3-90-12-16-SS Z64183-1612

1" 1" HFL3-90-16-16-SS Z64183-1616

1" 1-1/4 HFL3-90-16-20-SS Z64183-2016

1-1/4 1-1/4 HFL3-90-20-20-SS Z64183-2020

Page 46: WFA Hose Fittings

Williams Fluidair Corporation Limited1018 Salk Road Pickering, Ontario Canada L1W 3C5T: 905-831-3222 F: 905-831-3284 E: [email protected] W: www.williamsfluidair.com

Page 39 of 39

316SS Interlock Code 62 Flange Hose Fittings

Code 62 Flange Interlock Code 62 Flange 45E Interlock

HoseI.D.

FlangeSize

Model Number Part Number Model Number Part Number

3/4 3/4 HFL6-12-12-SS Z64282-1212 HFL6-45-12-12-SS Z64284-1212

3/4 1" HFL6-12-16-SS Z64282-1612 HFL6-45-12-16-SS Z64284-1612

1" 1" HFL6-16-16-SS Z64282-1616 HFL6-45-16-16-SS Z64284-1616

1" 1-1/4 HFL6-16-20-SS Z64282-2016 HFL6-45-16-20-SS Z64284-2016

1-1/4 1-1/4 HFL6-20-20-SS Z64282-2020 HFL6-45-20-20-SS Z64284-2020

1-1/4 1-1/2 HFL6-20-24-SS Z64282-2420 HFL6-45-20-24-SS Z64284-2420

1-1/2 1-1/2 HFL6-24-24-SS Z64282-2424 HFL6-45-24-24-SS Z64284-2424

1-1/2 2" HFL6-24-32-SS Z64282-3224 HFL6-45-24-32-SS Z64284-3224

2" 2" HFL6-32-32-SS Z64282-3232 HFL6-45-32-32-SS Z64284-3232

Code 62 Flange 90E Interlock

HoseI.D.

FlangeSize

Model Number Part Number

3/4 3/4 HFL3-90-12-12-SS Z64283-1212

3/4 1" HFL3-90-12-16-SS Z64283-1612

1" 1" HFL3-90-16-16-SS Z64283-1616

1" 1-1/4 HFL3-90-16-20-SS Z64283-2016

1-1/4 1-1/4 HFL3-90-20-20-SS Z64283-2020

1-1/4 1-1/2 HFL3-90-20-24-SS Z64283-2420

1-1/2 1-1/2 HFL3-90-24-24-SS Z64283-2424

1-1/2 2 HFL3-90-24-32-SS Z64283-3224

2 2 HFL3-90-32-32-SS Z64283-3232