Wetting Power Test Method
-
Upload
rezaul-karim-tutul -
Category
Documents
-
view
37 -
download
8
description
Transcript of Wetting Power Test Method
![Page 1: Wetting Power Test Method](https://reader035.fdocuments.us/reader035/viewer/2022081122/5461a244af7959422a8b4956/html5/thumbnails/1.jpg)
TEST METHOD
Determination of wetting power
Principle : Grey-state cotton fabric is immersed in the test solution.The fabric contains air which gives it buoyancy. As the liquid penetrates the fabric it expels the occluded air and the fabric starts to sink. The time from immersion to sinking is measured. Procedure : Equipment: (along the general lines of DIN test 53901 --> enclosed)
Immersion clamp No. I
1000 ml glass beaker, low shape Thermometer
Water: de-ionized water at 25°C
Test product: 3.5 g/l (other amounts can be chosen if necessary)
Material: grey-state cotton netting No. 1-3034 ∅ 3.5 cm
Procedure: Make up 1000 ml test solution
Fix the grey-state cotton netting in the clamp Dip the clamp into test solution & release cotton netting gripped in
it immediately
Assessment : Time measurement:
Measure time between immersion & sinking of grey-state cotton netting. For each test product perform 10 measurements in the same liquor
Test report Delete the highest and the lowest of the 10 measured times. Calculate the mean of the remaining 8.