West 05 2016
-
Upload
construction-equipment-guide -
Category
Documents
-
view
240 -
download
8
description
Transcript of West 05 2016
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
® WesternEdition
$3.00
Diesel Technicians Program
Under Way in Utah...8
IronPlanet Hosts Cat Auction
Services Florida Sale…47
Inside
By Brenda RuggieroCEG CORRESPONDENT
A large rock fall incident on Interstate 70 inNorthwestern Colorado on Feb. 15 is still inthe process of being remedied.The rock fall occurred in Glenwood
Canyon, which is in Garfield County, around2:30 a.m. Colorado Department ofTransportation (CDOT) crews flagged trafficthroughout the day as they worked to clearboulders. A second slide incident in the samelocation occurred at 9:03 p.m. that night.About an hour later, CDOT fully closed I-70through the canyon for safety. Initially, CDOT’s geohazards team was on
the site and also evaluated the location by hel-icopter. They determined that there was dam-age to the roadway, retaining wall, bridge andguardrail. A semi-truck was caught in the second slide
and disabled, but no injuries were reported.
Rock Fall Closes Portion of I-70 in Colorado
Seattle Tunnel Partners has receivedconditional permission to resume tun-neling operations on the SR 99 TunnelProject. STP resumed mining afterWSDOT conditionally lifted the “sus-pension for cause” that halted miningand barging-related activities in Januaryfollowing two safety incidents. As part of the conditions for lifting
the suspension for cause, STP will bepermitted to tunnel forward and installapproximately 25 concrete tunnel rings.During this time, they must demonstratethat they have implemented a number ofchanges to ensure they can safely con-tinue mining. These changes include:
• Updated tunnel work and qualityplans, including calculations of theamount of soil removed during excava-tion of each tunnel ring.• Realignment of key personnel with-
in their quality assurance program.• New quality assurance protocols.• New personnel at key positions
within the tunneling operation.• Restructured daily tunneling meet-
ings that include additional participantsand protocols. WSDOT made the decision to condi-
tionally lift the suspension for causeafter its team of tunneling experts evalu-
Seattle Tunnel PartnersResumes SR 99 Mining
see TUNNEL page 22
Ritchie Bros. Hosts Global
Auction in Fla...48
March 6, 2016 • Vol. IX • No.5 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910
www.constructionequipmentguide.com
By Scott SonnerASSOCIATED PRESS
RENO, Nev. (AP) Facing a deadline set by federal reg-ulators, Gov. Brian Sandoval said the state needs moretime to decide whether to end its long-held opposition tohaving an abandoned Nevada mine listed among thenation’s most contaminated sites.U.S. Environmental Protection Agency officials noti-
fied Sandoval last month that if they didn’t hear from himby Jan. 29, they’d formally propose placing Yerington’sformer Anaconda copper mine on the Superfund’sNational Priority List as soon as March.The World War-II era mine is already a federal
Superfund site, a designation that brought federal help
Nev. Needs MoreTime on MineSuperfundStatus
see SUPERFUND page 18
Tracy Trulove/Colorado Department of Transportation photoA semi suffered heavy damage in the Feb. 15 rockfall incident on I-70 inGlenwood Canyon. No injuries were reported.
see CDOT page 24
Published Nationally
Table of Contents ..........4
Attachment Section..................................11-14
Trucks & Trailer Section ...................................25-27
Business Calendar........32
Recycling Section....33-43
Auction Section ......46-59
Advertisers Index .........58
Page 2 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Why GEAX?• To work where others dare not go: narrow spaces, slopes, interiors ofbuildings, proximity to power lines.
• To avoid wasting time and resourceswith an oversized machine.
• For ease of use and speed of set up.• For the compactness of the machine:saving on transport, fuel, maintanance.
• To optimize every aspect of productionby adapting the equipment to meet alljobsite needs.SAVE TIME • SAVE MONEY
SAVE LABOR • SAVE OIL• No tools required• No expensive hardware needed• No more rags stuffed into hoses• No more messy plastic caps• The ultimate contamination control tool
• One hand installation• Eliminate hydraulic oil spills & clean up
• Quick installation & ease of usage
• Safe for personnel & environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
INTRODUCINGFlangeLock Tool Boxes
4 Tool Boxes AvailableAll Include Slugs and O'Rings.
TM
Volvo’s Gold Hauler MarksAnniversary of ‘Gravel Charlie’
Fifty years ago the world’s first articulated hauler was completed by Volvo engi-neers in Sweden. “Gravel Charlie” quickly became a construction industry icon andoperators’ favorite, with more than 70,000 articulated haulers produced to date.
To celebrate this special year of the articulated hauler, Volvo ConstructionEquipment employees in Shippensburg, Pa., custom-painted a metallic gold A40Gthat will travel across the United States and Canada in 2016.
The “Golden Hauler” will end its journey at ConExpo 2017. It will be auctionedwith proceeds going to SkillsUSA and SkillsCanada to support training programsthat encourage new generations to enter the construction industry.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 3
2007 JLG 1930ES, Stk#: 9702, 500 lbs., 19 ft.Platform Height, 246 hrs., Electric Power ..........................................................................$6,500
2015 Big Tex Dump, Stk#: 9928, ST235/85Rx16Tires ....................................................$17,500
2013 Case SV185, Stk#: 9525, OROPS, 214hrs., 64" Bucket, Aux Hyd., Hyd. Quick Coupler,4 Cyl. CNH Eng ....................................$29,500
2011 Komatsu PC130LC8, Stk#: 10103, EROPS,A/C, FM Stereo, 5,276 hrs., 48" Bucket, Aux.Hyd., 24" Pads, 4 Cyl. Komatsu Eng., 8' 7" Wide............................................................$69,500
Ripper for Dozer, Stk# 299, S# 1EH02480........................................................................$9,500
2006 Cat 930G, Stk#: 10155, EROPS, A/C &Heat, 9,389 hrs., 48" Wicker Forks & Hyd. TopClamp, , 81' Frame, 600/65Rx25 Tires @ 20%....................................................................$46,500
Cadet Mower, Stk#: 9667,48” Curing Deck GasEng., Zero Turn. ......................................$1,800
OEM Tracks, Stk#: 9718, New OriginalExcavator Tracks: 28” Pad, 49 Links, 190MMPitch, Cat, Komatsu, Hitachi, Volvo, Kobelco,Case, Linkbelt and Others ......................$7,500
Cat PA56 E00100E, Stk#: 9202, Winch with fairleads for D6T........................................$16,500
2000 Trail EZ Flat Bed, Stk#: HR-558, Hyd.Dove Tail with Winch. ............................$16,500
2006 Cat 325DL, Stk#: 10158, 60 ft. LongReach, EROPS, A/C, FM, Stereo, 4,724 hrs., 60"Bucket, 32" Pads, 11 ft. Wide..................$84,500
2008 Linkbelt LB330LX, Stk#: 10134, EROPS,A/C, 7,495 hrs., 48" Bucket, 32" Pads, 6 Cyl.Isuzu Eng., 11' 2" Wide ........................$69,500
2003 JLG 400S, Stk#: 9652, 500 lbs., 40 ft.,4WD, 4,810 hrs., 12x16.5 Tires, 3 Cyl. DuetzEng ......................................................$18,500QTY of Excavator Bucket, Stk#: 372 ........$3,000
Easy Kleen Magnum 400 Pressure Washer,Stk#: 164 ..................................................$3,200
2008 Cat D6T LGP, Stk#: HR-233, EROPS, A/C,FM Stereo, Sweep, Rear Screen, St/Tilt Blade,7,426 hrs., Paccar PA56 Winch, 36" Pads, 10' 5"Height, 10'7" Wide Track to Track, 13 ft. Blade ..............................................................$149,500
2013 Cat D6T LGP, Stk#: 10099, EROPS, A/C,Rear Screen, Angle Tilt Blade, 2,073 hrs., AlliedW6G Winch, 32" Pads, 17 ft. Wide ....$189,500
Tomahawk 66” Bruch Grapple (one Cylinder),Stk#: 262 ..................................................$1,500
2004 Cat D5N LGP, Stk#: 10145, OROPS, 6 WayBlade, 7,084 hrs., 30" Pads, Cat Diesel Eng., 10'10" Wide..................................................$42,500
2008 Case CX135SR, Stk#: 10123, EROPS, A/C,5,065 hrs., 36" Bucket, 28" Pads, 4 Cyl. IsuzuEng., 9 ft. Wide ....................................$49,500
2015 Doosan DX225LC-3, Stk#: 10098, EROPS,A/C, 9 hrs., 42" Bucket, Aux. Hyd., 32" Pads, 6Cyl. Doosan Eng., 10' 6" Wide............$139,500
2003 JLG 400S, Stk#: 9654, 500 lbs., 40 ft.,4WD, 5,244 hrs., 12x16.5 Tires, 3 Cyl. DeutzEng. ......................................................$18,500
2007 Daewoo G25E-3, Stk#: 10135, 5,000 lbs.,7 ft., 5,681 hrs., 7.00x15 Front and 6.50x10Rear Hard Rubber Tires, 4 Cyl. Daewoo Eng. ......................................................................$9,500
2016 Doosan DX225LC-3, Stk#: 10152,EROPS, A/C, 18 hrs., 44” Bucket, Aux. Hyd.,24” Pads, 9’ 10” Wide. ......................$139,500
2009 John Deere 550J LGP, Stk#: 10146,OROPS, 6 Way Blade, 6,400 hrs., 24” Pads, JDDiesel Eng., 9’ 7” Wide. ..........................$46,500
2015 Doosan DX225LC-3, Stk#: 10124, EROPS,A/C, 10 hrs., 42” Bucket, Aux. Hyd., 32” Pads, 6Cyl. Doosan Eng., 10’ 7” Wide. ............$139,500
2015 Dynapac CA2500D, Stk#: 10071, EROPS,A/C, FM Stereo, 3 hrs., 84" Smooth Drum w/PadDrum Shell Kit, 23.1x26R3 Tires, 4 Cyl. CumminsEng. ....................................................$102,500
2015 Dynapac CA1500D, Stk#: 10066, EROPS,A/C, FM Stereo, 2 hrs., 66" Smooth Drum w/PadDrum Shell Kit, 14.9x24R3 Tires, 4 Cyl. DeutzEng. ......................................................$80,500
2007 Volvo 240B LC, Stk#: 10127, EROPS, A/C,5,455 hrs., 54” Bucket w/Hyd. Thumb, 32”Pads, 11’ 2” Wide. ................................$59,500
2005 Cat D6R XL, Stk#: 10163, EROPS, A/C,Sweeps, Rear Screen, Semi U Tilt Blade, 9,974hrs., Paccar PA56 Winch w/Fair Leads,S#0500367, 80% U/C, 22" Pads, 10' 8" Wide ......................................................................$79,500
2005 Cat D3G LGP, Stk#: 10143, OROPS, 6 WayBlade, 827 hrs., 25” Pads, 10’ 3” Wide. ..$34,500
"In Business for over 33 Years"www.hendrixmachineryllc.com
1-936-327-5430 • Email: [email protected] Se HablaEspañol
2007 Ditch Witch RT40, Stk#: 9992, OROPS,1,072 hrs., 64” Push Blade, 6” Trench,26x12.00x12 Tires, 3 Cyl. Deutz Eng. ....$16,500
2007 Ditch Witch RT40, Stk#: 9990, 1,047 hrs.,6" Trench, 26x12.00x12 Tires, 3 Cyl. Deutz Eng...............................................................$16,500
2012 Kobelco SK210LC9, Stk#: 10104, EROPS,A/C, FM Stereo, 2,659 hrs., 58" Bucket, 32" Pads,10' 6" Wide ..........................................$98,500
2007 Cat 325DL, Stk#: 10159, EROPS, A/C,5,656 hrs., 52" Bucket, w/Manual Thumb, 32"Pads, 11 ft. Wide ....................................$79,500
2014 Bobcat T650, Stk#: 10149, EROPS, A/C,FM Stereo, 202 hrs., 70" Bucket, Aux. Hyd., 18"Rubber Tracks, 4 Cyl. Bobcat Eng...........$54,500
Brush Grapple, Stk#: 201A ....................$1,500
Page 4 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includ-ing framing) in whole or part without written permission from the publisher. All editorial material, photographs, draw-ings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes andare subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles donot necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not respon-sible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
SPECIAL SECTION33 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section!
Keep up to date with the latest information on recycling,
crushing and screening.
FEATURES2 VOLVO’S GOLD HAULER MARKS ANNIVERSARY OF
‘GRAVEL CHARLIE’Fifty years ago the world’s first articulated hauler was completed by Volvo engineers in Sweden. “Gravel Charlie” quickly became a construction industry iconand operators’ favorite, with more than 70,000 articulated haulers produced to date.
6 PHOENIX PLANS TO HIRE MORE STAFF IN PERMIT OFFICE
Phoenix has a plan to hire more city workers as officials say increased constructionactivity is making it difficult to keep up with project permitting and review.
8 DIESEL TECHNICIAN PATHWAYS PROGRAM ‘REVS UP’ IN UTAH
Gov. Gary R. Herbert, along with Utah Diesel Technician industry partners and theGovernor’s Office of Economic Development (GOED), announced the Utah DieselTechnician Pathways program, which is designed to provide Utah students a directpathway from high school and college to the workforce.
18 ASPEN PASSES MEASURE THAT REQUIRESCONTRACTORS TO LIMIT CONSTRUCTION NOISE
The Aspen City Council has approved a new law that will require construction contractors to keep the noise down in the summertime as part of an effort to get people to spend more time outdoors in warmer months.
33 RD OLSON OFFERS CUSTOMIZATION OF VARIOUS MACHINES
Founded in 1980 by Roger Olson, RD Olson Manufacturing is headquartered inKelso, Wash. Manufacturing was started on the current site in 1982, relying onRoger’s expertise in heavy steel fabrication, road construction, crusher and rockquarry operation.
36 PORTABLE HOPPER ELIMINATES SURGESThe new portable hopper feeder from KPI-JCI and Astec Mobile Screens is nowoffered as a highway-portable rental tool designed to introduce material into aplant and eliminate surges in quarry systems.
40 NEW WAYS TO TRAIN, IMPROVE SKILL WITH ATLAS COPCO APP
Because the right skills increase safety and productivity, Atlas Copco is offeringnew ways to access training on its mining equipment. The classes can be done onsite, in classrooms and even online.
42 MB AMERICA’S LIVE DEMO DRAWS CROWD ATWORLD OF CONCRETE
In the Silver Lot of the Las Vegas Convention Center, an excavator and a skidloader picked up large concrete chunks with a jaw crusher attachment — signaling to passersby that the crushing action was about to begin.
47 IRONPLANET HOLDS RECORD CAT AUCTIONS SALE IN FLORIDA
IronPlanet/Cat Auction Services sold more than 2,350 items for $93.8 million ingross merchandise volume (GMV) at its auctions in Kissimmee, Fla., from Feb. 8 to12, 2016, an increase of 95 percent over GMV of $48 million for its three-daysale in February 2015.
48 RITCHIE BROS. FLORIDA SALE BRINGS IN MORETHAN $172M
Buyers from around the world visited Ritchie Bros.’ 200-acre Orlando, Fla., site forthe year's largest equipment auction. In just five days, Ritchie Bros. sold a record10,700-plus items for more than $172 million.
EQUIPMENT34 POWERSCREEN Warrior 1400XE
40 METSO HRC 3000 Grinding Roll
DEPARTMENTS32 BUSINESS CALENDAR
44 CLASSIFIEDS
46 COMING AUCTIONS
WESTERN EDITIONCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii
• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming
Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.
Editor In Chief Craig Mongeau Associate Editor Christine Allen
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Judith NixonCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900
Toll Free 800/523-2200 Fax 215/885-2910
Web site www.constructionequipmentguide.comEditorial e-mail [email protected]
Advertising e-mail [email protected]
For advertising rates: Contact Kent HogeboomNational Sales Manager
315/866-1423Toll Free 800/988-1203
Fax 315/866-1379e-mail [email protected]
Contact Dale Agnew• Colorado • Louisiana
• Oklahoma • Texas
Toll Free 877/877-4997 Fax 972/695-6049
e-mail [email protected]
Contact Dennis Hogeboom• Arizona • California • Hawaii • Nevada
• New Mexico • Utah
602/679-8759e-mail [email protected]
Contact Patrick Kiel• Idaho • Montana • Oregon • Washington • Wyoming
Toll Free 866/413-4265Fax 952/353-2750
e-mail [email protected]
Mobile LinkedIn Facebook Twitter YouTube
To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com
IN THIS ISSUE338 42
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 5
MehnDoug
od us tlll us tCayer / BrMehn
ay!dday!Gangeran y
.Rww.Rwwww
oused.cB
(866
mo
85) 4(866 -71
eblCe
0871
th r 30u ongg oratiingb
r!eaYYea
1984 EUCLID R35: #92281, CUMMINS 6CYL DIESEL, DISC BRAKES, SINGLE CYLAIR COMPRESSOR, A/C, CHAIN OPERATEDTAILGATE, 18.00-33 TIRES, 9350 HRS ..................................................................$34,500
2011 KOMATSU HM300-2: #81724, CAB/AC,TAILGATE, KOMTRAX, 4300 HRS ..$279,500
2011 KOMATSU HM400-2: #81906, 40-TONTRUCK, CAB/AC, 29.5-25 TIRES, 3650 HRS......................................................$399,500
1979 TEREX 3305: #92278, CUMMINS 6 CYLDIESEL, CHAIN OPERATED TAILGATE,NITROGEN CHARGED SUSPENSION CY’S ATBOTH FRONT AND REAR, DRUM TYPEBRAKES, 18.00-25 TIRES, 1260 HRS$23,500
2008 CAT 420E: #91799, CAB/AC, QC/BKT/FORKS, 4X4, EXT-A-HOE, AUX HYD, 3900HRS..................................................$64,500
2006 DEERE 310G: #81652, CAB/AC, 4X4,AUX HYD, 1700 HRS ......................$49,500
2003 KOMATSU WB140PS-2: #50172,CAB/AC, 4X4, EXT-A-HOE, AUX HYD, 1300HRS..................................................$49,500
2008 KOMATSU WB146-5: #50988,CAB/AC, 4X4, GP BKT, 2000 HRS....$56,500
2000 KOMATSU PC30MR-1: #5853, CABW/HEAT, 4’2” ARM, 12” ROAD LINERS,1400 HRS ........................................$29,500
2012 KOMATSU PC35MR-3: #51406,CAB/AC, BLADE, ROAD LINERS, AUX HYD,KOMTRAX, 700 HRS ..........................$CALL
2013 TAKEUCHI TB138FR: #92258, CAB/AC,RUBBER TRACK, QC, HYD THUMB, AUXHYD, 200 HRS ................................$54,500
2010 TAKEUCHI TB235: #92217, CAB/AC,RUBBER TRACK, QC, HYD THUMB, 2000HRS..................................................$34,500
2006 KOMATSU PC228US LC-3: #82164,CAB/AC, JRB QC, HYD THUMB, 5100 HRS ........................................................$139,500
2007 KOMATSU PC300 LC-8: #82273,CAB/AC, 33.5” TRACKS, 13’ ARM, PCV,KOMTRAX, 4400 HRS....................$179,500
2012 KOMATSU PC360 LC-10: #81990,CAB/AC, 33.5” TRACKS, 10’6” ARM, KOM-TRAX, REAR CAMERA, 3100 HRS $249,500
2008 KOMATSU PC400 LC-8: #91887,CAB/AC, 33.5” TRACKS, 13’ ARM, JRB QC,AUX HYD, KOMTRAX, REAR CAMERA, 7900HRS................................................$169,500
Page 6 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Visit www.sealsaver.comfor more information or contact us at
1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.
1155 Allgood Road • Suite 15Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills
and Hot Slag Industries.
SatisfactionGuaranteed!
SEAL SAVER PROTECTIVECYLINDER COVER
KOMATSUD65EX-15
STOP the never ending cycle of cylinder repairs.
Made inthe USA
The SEAL SAVER WILL:Protect cylinders from the elements
• Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring
EMPLOYMENT OPPORTUNITY
Bacon-Universal Company, Inc.www.baconuniversal.comHIHilo808-935-8595 • 800-352-3508Honolulu808-839-7202 • 800-352-3508Kailua-Kona808-326-1212 • 800-352-3508Kauai (Lihue)808-245-8472 • 800-352-3508Wailuku Maui808-244-9158 • 800-352-3508
Clairemont Equipment Co.www.clairemontequipment.comCAEscondido760-739-9100Fontana909-429-9100Imperial760-355-7700Indio760-863-5558San Diego858-278-8351
Craig Taylor Equipment Companywww.craigtaylorequipment.comAKAnchorage907-276-5050 • 800-279-5051Fairbanks907-452-1192 • 800-452-1192Soldotna907-262-5977 • 800-254-5977Wasilla907-376-3838 • 800-973-2607
Kirby-Smith Machinery Inc.www.kirby-smith.comOKOklahoma City405-495-7820 • 800-375-3339Tulsa918-438-1700 • 800-375-3733TXAbilene325-692-6334 • 877-577-5729Amarillo806-373-2826 • 800-283-1247Dallas214-371-7777 • 800-753-1247Ft. Worth817-378-0600 • 877-851-9977Lubbock806-745-2112 • 866-289-6087Odessa432-333-7000 • 877-794-1800
Power Motive Corporationwww.powermotivecorp.comCOColorado Springs719-576-5541Denver303-355-5900Durango970-259-0455 • 970-259-0456Grand Junction970-241-1550Milliken970-587-1188WYCheyenne307-634-5149
Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges.With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
WEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
PHOENIX (AP) Phoenix has a plan to hire more cityworkers as officials say increased construction activity ismaking it difficult to keep up with project permitting andreview.A City Council subcommittee has approved the planning
department’s plan to add 19 new positions, and the staffingboost now goes to the full City Council.Councilwoman Kate Gallego says the need for additional
staffing reflects the improved economy and she says theapproval of the additional positions signals that Phoenix “isopen and ready for business.”Phoenix’s planning department had reduced its staff dur-
ing the great recession as development and constructionactivity slowed.Officials say the new positions will be focused on provid-
ing guidance to builders and information to residents whileshortening timelines.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)
Construction Surge...
Phoenix Plans toHire More Staffin Permit Office
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 7
www.komatsuamerica.com/komatsu-care
Komatsu Equipment Co.www.komatsueq.comNVElko775-753-7557North Las Vegas702-399-1004Sparks/Reno775-356-1334UTSt. George435-986-1000Pleasant Valley435-216-7777Salt Lake City801-972-3660 • 1-877-KomatsuSouth Jordan801-972-3660WYCasper307-682-1445Gillette307-682-1445Rock Springs307-686-1300
Modern Machinery, Inc.www.modernmachinery.comIDBoise208-336-8570 • 800-221-5211Pocatello208-233-5345 • 800-829-4450MTBillings406-252-2158 • 800-735-2589Kalispell406-755-5540 • 800-434-4190Missoula406-523-1100 • 800-332-1617OREugene541-688-7321 • 800-826-9811Portland971-222-1710 • 800-950-7779WAKent253-872-3500 • 800-669-2425Rochester360-273-4284 • 800-304-4421Spokane509-353-1654 • 800-541-0754
Road Machinery, LLCwww.roadmachinery.comAZGilbert480-545-2400Phoenix602-252-7121Prescott928-778.5621Tucson520-623-8681 • 800-989-8681CABakersfield661-695-4830Fremont510-659-1903Fresno916-350-0640Perris909-355-3600Redding530-229-3820Pico Rivera562-699-6767West Sacramento916-375-3540TXEl Paso915-872-1001NMAlbuquerque505-345-8383Farmington505-324-8601
Waukesha-Pearce Industries,Inc.www.wpi.comTXBeaumont/Port Arthur409-721-5305Buffalo903-322-7150Corpus Christi361-884-8275Edinburg956-386-0107Houston713-723-1050Kilgore903-984-2011Pflugerville512-251-0013San Antonio210-648-4444Tomball281-351-9016
MADE WITH PASSION AND PRIDE
Page 8 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Diesel Technician Pathways Program ‘Revs Up’ in Utah Gov. Gary R. Herbert, along
with Utah Diesel Technician indus-try partners and the Governor’sOffice of Economic Development(GOED), announced the UtahDiesel Technician Pathways pro-gram, which is designed to provideUtah students a direct pathwayfrom high school and college to theworkforce.
Herbert announced the programduring a press conference at theCummins Rocky Mountain facilityin Salt Lake City. An initiative sim-ilar to the Utah AerospacePathways (UAP) program, thediesel technician industry is creat-ing a pathway that will openopportunities for young men andwomen who are interested in thediesel technician field.
“Productive education partner-ships, such as the Utah DieselTechnician Pathways program, areimportant investments in the state’sfuture,” Herbert said. “We are for-tunate to have unique partnershipswith industry and education lead-ers to better align workforce edu-cation with economic opportuni-ties in Utah.”
The program begins in high
Students take a close-up look at a Komatsu loader before Gov. Herbert introduced Diesel Tech, aprogram to help students pursue a career in the diesel technology field.
John Pfisterer (R), president of Komatsu Equipment Corporation,chats with Rick Clasby, executive director of the Utah TruckingAssociation, during the recent event, held at Cummins RockyMountain in Salt Lake City. Komatsu Equipment is an industrypartner in the Pathways program. Gov. Herbert starts a diesel engine at the conclusion of the press conference.
see UTAH page 10
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 9
BANE MACHINERY, INC.2449 Manana Rd.Dallas, TX 75220
214/352-2468Fax: 214/353-2460
Tyler, TX903-597-6641
Ft. Worth, TX817/847-5894
SCOTT EQUIPMENT14635 Valley Blvd.Fontana, CA 92335
800/316-0327Fax: 909/822-4850
www.scottequip.com
BEE EQUIPMENT SALES LTD.2506 Slaton HighwayLubbock, TX 79404
806/745-1511Fax: 806/455-0543
C. L. BOYD CO., INC.4220 West Reno Ave.
Oklahoma City, OK 73107800/OKC-BOYD405/942-8000
Fax: 405/945-8569
Ardmore, OK866/720-2693580/224-2693
Lawton, OK800/633-2693580/355-6667
Page 10 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
RDO Equipment Co. Breaks Ground at Newest Location Construction has started at RDO
Equipment Co.’s second locationin the Phoenix area. On Jan. 29,team members gathered for aninformal groundbreaking ceremo-ny. The new store is located onInterstate 10, south of 202, and isexpected to open in early 2017.Like the current RDO
Equipment Co. location in centralPhoenix, this new location will selland support John Deere construc-tion equipment.
“The new store in Chandler fur-thers our commitment to our cus-tomers and allows us to expand ouroverall services and product sup-port capabilities in an expandingmarket. We look forward to grow-ing our close-knit team into anadditional location and continuingto serve the Phoenix communityfor many years to come,” said
Dennis Howard, vice president ofSouthwest Construction. Founded in 1968, RDO
Equipment Co. sells and supportsagriculture, construction, environ-mental, positioning, surveying andirrigation equipment from manu-facturers including John Deere,Vermeer, and Topcon. With morethan 75 locations across the United
States, including partnerships inRussia, Ukraine and Australia,RDO Equipment Co. is a totalsolutions provider. For more information, visit
www.rdoequipment.com.(This story also can be found
on Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)
Blucor Contracting Inc. photoRDO Equipment Co. team members and staff of Blucor Contracting Inc. held a ground breaking at thesite of the new Chandler location. Blucor is performing the dirtwork.
Blucor Contracting Inc. photoThe new Chandler location, RDO Equipment Co.’s second store inthe Phoenix area, will sell and service John Deere constructionequipment.
Gov. Herbert Announces Diesel Tech Pathways Programschool with the completion ofselect classes. Upon graduation,students will complete an intern-ship with one of the diesel techni-cian industry partners and then atleast one year of training at SaltLake Community College(SLCC). This program has broughtdiesel technician industry repre-sentatives, education leaders andgovernment together in collabora-tion. The six diesel technician indus-
try partners in Utah participating inthis program are Cummins RockyMountain, Jackson GroupPeterbilt, Kenworth SalesCompany, Komatsu EquipmentCorporation, Mountain West TruckCenter Volvo Mack and WheelerCAT.The collaboration started in Oct.
2015 with the goal of having thepilot program beginning in the2016 school year. Canyons andJordan School Districts, whoalready offer diesel techniciancoursework, are working with theindustry partners to fully align the
curriculum offered in their pro-grams. Students from those classeswill be able to complete theirinternship after high school gradu-ation and then, with additionaltraining at SLCC, possible workwith one of the industry partners. The industry partners will be
providing the school districts with
the most up-to-date technology fortheir students to train on. They alsowill provide the students an oppor-tunity to interview for employ-ment.“We are excited about the
opportunity to work with theseschool districts to strengthen ourworkforce in the diesel technician
industry,” said Kyle Treadway,president of Kenworth SalesCompany. “Working with educa-tion will prove to be an asset to theindustry community as we get tointeract with the students who areinterested in this career path.”The program’s launch has been
made possible through the dedica-
tion and commitment of severalorganizations throughout Utah.Partnerships like these continue toproduce proactive solutions for thestate’s workforce development.
(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)
Utah Gov. Gary Herbert emphasizes the partnership of industry,education and government in making Diesel Tech possible.
Brady Southwick, president at Cummins Rocky Mountain, gave anoverview of Utah Diesel Technician Pathways.
UTAH from page 8
Steps for Choosing Concrete Dowel Drill for ProjectsBy Randy StevensSPECIAL TO CEG
Concrete drilling projects cancover one mile to a hundred, and afew holes to thousands. But beforechoosing a drill based on the clearfacts, you’ll need to hammer intothe details, which could reveal thatbigger isn’t always better, lesscould be more and workingsmarter not harder goes a long way.From handheld to on-grade and
slab rider to equipment-mounted,there are several different types ofconcrete drills with various featuresand capabilities that can affecteverything from efficiency to accu-racy and ease of use to safety.
The Spec SelectionThe simplest drills are handheld
electric hammer or pneumatic rockdrills. They get the job done, butcome with three significant draw-backs. First, they can lead to
injuries of the hands and armssince operators absorb themachines’ vibrations. In addition,lifting and repositioning the drillsat the next spot can lead to backinjuries. Second, they are slow.
Operators can only drill one hole ata time and to top it off they canhave a hard time maintaining con-sistent pressure that’s needed fast,effective drilling. And third, hand-held drills are inaccurate. There is
simply no way an operator can drillholes perfectly straight by hand. Faster, safer and oftentimes
specified options are dowel-drilling machines that don’t requireoperators to hold them. One typeof dowel drilling machine is an on-grade drill that sits on the subgradeand drills into the slab. They areavailable in mobile as well as sta-tionary models. Stationary drillstypically are small but lightweight,so operators can easily repositionthem. And even though they don’tcome equipped with wheels, mostmanufacturers can add wheels tomake them mobile. Mobile units,while typically bigger, are eveneasier to reposition because theyare equipped with wheels that roll
along the subgrade. Drills that work from the slab
rather than the subgrade are calledslab riders. They operate withoutdisturbing the subgrade and areequipped with up to five drills foreven greater efficiency on somelarge projects. They are bigger thanon-grade models, but are equippedwith wheels and auto alignmentfeatures for fast and easy reposi-tioning. Some are even self-pro-pelled for quick maneuvering tothe next drilling spot while anoptional towbar attachment pullsthe air compressor. For added ver-satility, some slab riders even canbe converted to drill on-grade,which gives contractors the versa-tility to work on a variety of
drilling projects.Equipment-mounted drills also
work on the slab, but are attachedto a backhoe or excavator thatrepositions them quickly. They areavailable with three to five drills,and can rotate 360-degrees toquickly drill on opposite sides of aslab without moving the carriermachine. Equipment-mounteddrills also feature adjustable spac-ing and smooth, precise shiftingcapabilities that allow users to drilla second set of holes without repo-sitioning.
Scratching the SurfaceUnderstanding the types of drills
is a good place to start when select-ing one for a project, but you alsomust consider jobsite limitations. Ifthere are only a few inches of slabexposed, an on-grade drill is youronly option. And if there isn’tmuch area to work on the sub-grade, like in smaller patches, youmight need a more compact modelwith fewer gangs. Single gang, on-grade drills are
lightweight and load easily into atruck, which makes them a greatchoice for projects where you willneed to move frequently. However,they might not be an efficientoption for large projects that covergreater distances. That’s when it’stime to take a look at larger mod-els. Slab rider drills are considerably
heavier, so they must be loadedonto a truck or trailer to be towedto the job site, and unloaded with aforklift or other piece of machin-ery. While the logistics might bemore challenging compared to on-grade drills, slab riders can delivergreater efficiency on large, long-distance projects like lane addi-tions. Also, because they aremounted on wheels, self-propelledand don’t need to operate from the
Pages 11-14For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
SECT IONAttachments
Equipment-mounted drills can be mounted to a backhoe or exca-vator to quickly move from one patch the next.
Slab rider drills reference from the top of the slab, which is morelevel than the subgrade. As a result they are more accurate.
see DRILL page 12
Page 12 • March 6, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Slab Rider Drills Must BeMoved by Trucks or Trailers
subgrade, they can quickly and easily movefrom one patch to the next. This also makesslab riders ideal for full-depth repair jobswhere patches are located in close proximityto one another. And finally, slab rider drillsreference from the top of the slab, which ismore level than the subgrade. As a resultthey are more accurate.On larger full-depth repair projects that
consist of multiple intermittent patches thatspan several hundred feet, an equipment-mounted drill might be the most efficient.Rather than loading an on-grade or slab riderdrill and driving it to each new patch, theoperator simply lifts the drill with the back-hoe or excavator and drives to the next patch. While basic jobsite conditions will help
narrow down your decision, the number ofgangs also is a factor.
Doing the NumbersSingle-gang drills are typically ideal for
jobs that require several hundred to a fewthousand holes, while two-gang drills arebetter suited for 5,000 to 10,000 holes. Andas the number of holes increases, so can thenumber of drills on a machine. But choosing the right number of drill sys-
tems can go beyond the size of the project.For example, concrete slabs need time to setbefore they can be drilled, and in some casesseveral pours are required. Some of theseprojects might include a lot of holes, but asmaller drill with fewer gangs could be morecost effective because operators are limited
in terms of how many holes they can drill ata given time. On the other hand, if you only can drill
during certain hours of the day or night,which is common on busy interstate projectswhere minimal traffic interruption isallowed, a high production rate is a must,even if the total number of holes isn’t high.So while a single-gang would get the jobdone, a multi-gang will drill more holes inthe shorter time period. Keep in mind that if you increase the num-
ber of drill systems, you’ll also need more airto power them. Each gang operates independ-ently and typically requires about 100 cfmfrom an air compressor, so if you’re operatinga five-gang drill, at minimum you’re going toneed a 500 cfm air compressor.
Get Below the SurfaceWhether it’s on-grade, slab rider or equip-
ment-mounted, matching the right drill withthe project takes more than knowing the sur-face details. To be sure you’re making thebest impact on your efficiency, accuracy andproductivity, drill into the details.
Randy Stevens is the vice president ofsales at E-Z Drill. He has been with the com-pany for more than 20 years. Stevens hasserved on various committees of theAssociation of Equipment Manufacturers(AEM) and is a member of the AmericanConcrete Pavement Association.
(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
DRILL from page 11
Multi-gang drills are often self-propelled and equipped with wheels and auto-align-ment features for faster repositioning and greater efficiency on projects that coverlong distances.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • March 6, 2016 • Page 13
ENGINEERED TO PERFORM
CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS
FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES
DURABLE BY DESIGN
Kits to operate most any attachment
Welded tube ends for maximum strength & durability
OEM style ORFS or CD62 4-bolt flange
Higher safety standards
Efficient designs with fewer connections
Add on/custom valves
ypica
l .200” wall thickness
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
Page 14 • March 6, 2016 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Arctic Snow & Ice Products, Inc.
Arctic Sectional Sno-PusherTM
JOIN OUR
DEALER
NETWORK
We support the
We are growing and improving our manufacturing
facility to meet your growing needs. New dedicated
materials processing center, Larger, faster paint
process center and a larger multi station shipping
center. All these improvements were done to service
you, our partner in business. Our commitment to you
is being the best we can be and provide the finest
products in the snow removal industry.
SELL THE MOST SOUGHT AFTER
SNOW REMOVAL PRODUCT
ON THE MARKET TODAY!
WHEN YOU
COMMIT TO US,
ARCTIC COMMITS
TO YOU.
Sectionalsnopusher.com • (888) 2-ICE-SNO
Arctic Snow
Arctic Snow && Ice
Ice Products, Inc.
Ice Products, Inc.
C
ARCTIC
WHEN
COMMIT TO US,
ARCTIC
TO YOU.
COMMITS
YOU
O US, ,
COMMITS
TO YOU.
TO YOU.
TO YOU.
y , p
is being the best we can be and provide the finest
products in the snow removal industry.
SELL THE MOST SOUGHT AFTER
is being the best we can be and provide the finest
products in the snow removal industry.
SELL THE MOST SOUGHT AFTER
is being the best we can be and provide the finest
products in the snow removal industry.
SELL THE MOST SOUGHT AFTER
We support the
y
is being the best we can be and provide the finest
Arctic Sectional Sno-PusherSectionalsnopusher
SELL THE MOST SOUGHT AFTER
SNOW REMOVAL PRODUCT
Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO
SELL THE MOST SOUGHT AFTER
SNOW REMOVAL PRODUCT
ON THE MARKET TODAY!
c.onalsnopusherr.
Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO
SELL THE MOST SOUGHT AFTER
SNOW REMOVAL PRODUCT
ON THE MARKET TODAY!
Arctic Sectional Sno-PusherTM
We support the
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 15
ABILENE EQUIPMENT CENTERAbilene, TX 800/382-9271www.anhltd.com
BANE MACHINERY INC.Dallas, TX 800/594-2263Ft. Worth, TX 800/601-2263Tyler, TX 800/594-2200www.banemachinery.com
OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENTOklahoma City, OK 405/917-9191Tulsa, OK 918/835-7200www.oklahomaterritoryequipment.com
APCO EQUIPMENTNorth Las Vegas, NV 800/574-4089www.apcoequipment.com
TRI-WEST TRACTOR, INC.Livermore, CA 925/455-8200www.tri-westtractor.com
RASMUSSEN EQUIPMENT CO.West Valley City, UT 800/453-8032www.rasmussenequipment.com
CLM EQUIPMENT CO. INC.Lafayette, LA 337/837-6693Lake Charles, LA 337/625-5942Baton Rouge, LA 225/677-7838Biloxi, MS 228/396-8740Houston, TX 281/598-2500www.clmequipment.com
BEARD EQUIPMENT CO.Midland, TX 432/694-4530www.beardequipco.com
Page 16 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Shipping and Handling Included WE PURCHASE COLLECTIONS!!!
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.
Bantam Truck Crane, 1:50 Scale - $135
Bobcat Versahandler, 1:50 Scale - $50
GroveTM1500MobileCrane, White,1:55 Scale $140
Allis-Chalmers TS-300 Motor Scraper,1:50 Scale - $100
Bucyrus Erie 22B Cable Backhoe, 1:50 Scale - $200
Caterpillar D6R Track-Type Tractor, 1:50 Scale - $85
Caterpillar 365C L Front Shovel, 1:50 Scale - $100
Case CX250C Excavator, 1:50 Scale - $140
International 350 Payhauler, 1:25 Scale - $125
Caterpillar D7E Track-Type Tractor, 1:50 Scale - $85
John Deere 460E Articulated DumpTruck, 1:50 Scale - $60
Caterpillar 621K Motor Scraper, 1:50Scale - $125
Komatsu PC360LC-10 Excavator, 1:50 Scale - $90
Link Belt 800 X2 Excavator, 1:50 Scale - $200
Bucyrus Erie 22B Dragline, 1:50 Scale - $275
Caterpillar D8R Military Track-TypeTractor, 1:50 Scale - $50
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 17
We make one of the broadest lines of construction, mining, road
building and material handling equipment in the world. All
backed by top-notch warranty, training, parts and service
support. Contact your local dealer today for more information...
T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com
Dearler 1Houston, TX
p. (555) 555 - 5555www.dealersite.com
Dealer 2Austin, TX
p. (555) 555 - 5555www.dealersite.com
Dealer 3Dallas, TX
p. (555) 555 - 5555www.dealersite.com
Dealer 4San Antonio, TX
p. (555) 555 - 5555www.dealersite.com
EVERY JOB.EVERYWHERE.
Noble Equipment
505 Rankin Road • Houston, TX 77073
281-443-7667 • Fax 281-443-7886
www.nobleiron.com
Westrax Machinery
www.westraxmachinery.net
19618 South Susana RoadRancho Dominguez, CA 90220
310-605-2900 • Fax: 310-631-2775
19885 Temescal Canyon RoadCorona, CA 92881
951-732-6781
Page 18 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KOMATSU EQUIPMENTCOMPANY
1486 South Distribution DriveSalt Lake City, UT 84104
801-972-36604460 Pioneer Way
Elko, NV 89801775-753-7557
3825 Losee RoadNorth Las Vegas, NV 89030
702-399-1004900 Marietta WaySparks, NV 89431
775-356-13341409 East 3850 SouthSt. George, UT 84790
435-986-100010790 South Highway 59
Gillette, WY 82718307-682-1445
405 Jonah DriveRock Springs, WY 82901
307-686-1300
ROAD MACHINERYwww.roadmachinery.com
Gilbert, AZ480-545-2400
Phoenix, AZ602-252-7121
Prescott, AZ928-778-5621
Tucson, AZ800-989-8681
Bakersfield, CA661-695-4830
Fremont, CA510-659-1903
Fresno, CA559-834-3215
Mojave, CA - Coming Soon
Perris, CA909-355-3600
Pico Rivera, CA562-699-6767
Redding, CA530-229-3820
Sacramento, CA916-375-3540
Albuquerque, NM505-345-8383
Farmington, NM505-324-8601
ASPEN, Colo. (AP) The Aspen CityCouncil has approved a new law thatwill require construction contractors tokeep the noise down in the summer-time as part of an effort to get people tospend more time outdoors in warmermonths.The measure could require builders
to put up sound-blocking walls.Trish Aragon, Aspen’s city engineer,
said the city has been working on thenew noise standard for about a year.She said some contractors have
already been following the tighter stan-dards.Temporary sound-blocking walls
were used in Aspen near the PitkinCounty Courthouse as a part of therecent Galena Plaza work and at sever-al residential construction projects, the
Aspen Daily News reported.Noise from construction sites is
measured at the property line.The new rules are part of the city’s
regular updates to construction man-agement rules. Last summer, contrac-tors were required to file plans toreduce landfill waste and minimizetraffic and parking. They were alsoordered to limit detours on streets andsidewalks.To enforce the rules, two additional
seasonal construction mitigation offi-cers have been hired.As a result, the number of violations
issued to contractors went up 18 per-cent, and citizen complaints dropped80 percent.For more information, visit
http://www.aspendailynews.com.(This story also can be found on
Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Last summer, contractors were required to file plans to reduce landfill waste and minimize traffic and parking.
New Noise Standard...
Aspen Passes Measure That RequiresContractors to Limit Construction Noise
Superfund Status Under Considerationwith containing the pollution and pinpointing its source.Adding the site to the priority list would make it eligible forfederal money to pay for 90 percent of the tens of millions ofdollars needed to start cleanup.But critics fear the listing would give Yerington and sur-
rounding ranches a black eye.In a letter to the EPA, Sandoval said he is not yet con-
vinced such a listing is in the state’s best interest given con-tinued opposition from local residents. They fear an adverseimpact on property values and uncertainty over future avail-ability of EPA funds.“We continue to view NPL listing as an option of last
resort,” the governor wrote. “I am assured by the NevadaDivision of Environmental Protection that there are noimminent health concerns at the site that require immediateaction.”Sandoval said there’s no reason any rule-making can’t
wait until September. He said he’ll provide his formal posi-tion on the matter at the end of April, while the state contin-ues to examine its options.The mine covers 6 sq. mi. (9.64 sq km) of land owned
partly by the U.S. Bureau of Land Management. AtlanticRichfield acquired the property in 1977 from AnacondaCopper, which built the mine in 1941.Fueled by demand after WWII, Anaconda produced 1.7
billion lbs. (771 million kg) of copper from 1952 to 1978 atthe mine in the Mason Valley, an irrigated agricultural oasisin the area’s otherwise largely barren high desert.The site’s most recent owner, Arimetco, abandoned it in
2000.In 2013, the mine’s rural neighbors won a $19.5 million
settlement from companies they accused of covering up thecontamination of drinking water wells. EPA tests showed
rural wells were tainted by uranium and other toxic chemi-cals that leaked from the mine for decades.EPA regional administrator Jared Blumenfeld last month
told Sandoval he needed to know by Jan. 29 whether thestate has an alternative cleanup proposal. He said the agencyis running out of time to get funding proposals in the pipelineand head off concern about the risk of hazardous chemicalsescaping from the aging site in the next few years.Blumenfeld said the most immediate threat is the estimat-
ed 90 million gallons of acidic solution that Arimetco left inthe heap leach and fluid management system.“The reason for urgency is that funding needs to be in
place well before the current pond capacity is exceeded,”Blumenfeld wrote in a Dec. 22 letter. He said the situationdemands constant management to avoid further leakagefrom the storage ponds, or an overflow.“The consequence of either could result in significant
additional threat to the Mason Valley Groundwater Basin,”he said.Construction on a remedy needs to start by summer 2019,
he addedThe state projected last year it would cost $30.4 million to
address the most pressing concerns at the mine.Sandoval acknowledged the need for a permanent closure
of the Arimetco heaps.“But not the dire nature of the situation and urgency con-
veyed in your letter,” he wrote to the EPA. “I have beenadvised that there is no critical reason to propose listing ofthe site in March, as you recommend, versus September2016.”
(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)
SUPERFUND from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 19
KIRBY-SMITH MACHINERY INC.6715 W Reno
Oklahoma City, OK 73137800-375-3339405-495-7820
Fax: 405-787-5973
12321 E. Pine StreetTulsa, OK 74116
800-375-3733918-438-1700
Fax: 918-437-7065
Abilene, TX877-577-5729325-692-6334
Amarillo, TX800-283-1247806-373-2826
Dallas, TX800-753-1247214-371-7777
Ft. Worth, TX877-851-9977817-378-0600
Lubbock, TX866-289-6087806-745-2112
Odessa, TX877-794-1800432-333-7000
www.kirby-smith.com
POWER MOTIVE CORPORATIONDENVER HEADQUARTERS
5000 Vasquez Blvd.Denver, CO 80216
303-355-5900
Colorado Springs, CO719-576-5541
Grand Junction, CO970-241-1550
Milliken, CO970-587-1188
Durango, CO970-259-0455
Cheyenne, WY307-634-5149
www.powermotivecorp.com
WAUKESHA-PEARCE INDUSTRIES, INC.
12320 S. MainHouston, TX 77035
713-723-1050Fax: 713-551-0798
Tomball, TX281-351-9016
Kilgore, TX903-984-2011
Port Arthur, TX409-721-5305
Corpus Christi, TX361-884-8275
Edinburg, TX956-386-0107
San Antonio, TX210-648-4444
Pflugerville, TX512-251-0013
Buffalo, TX903-322-7150www.wpi.com
Page 20 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Some companies have you choose power or fuel efficiency. You chose both.
eloped the industrvo deolvVVolv
st fuel efficiency guary’s fireloped the industr
ever ha avvantee so you nest fuel efficiency guar
e
omise on perto comprmonitoring, you can f
owing your business. Get the details at gr
And with Car. oductivitye or prormancfomise on pere imporocus your attention on mormonitoring, you can f
owing your business. Get the details at ocolvv
ack machinereTTrAnd with Caretant things — like impor
tfuelom/smare.coc .
Contact your local dealer:
Sparks, NV775-356-1511Fax: 775-356-0517
Las Vegas, NV702-642-9000Fax: 702-642-8808
Phoenix, AZ 602-414-1900Fax: 602-414-1904
Tucson, AZ520-294-7677Fax: 520-294-7670
Salt Lake City, UT801-972-4000Fax: 801-975-9434
Idaho Falls, ID208-523-0822Fax: 208-523-9918
Meridian, ID208-887-6000Fax: 208-887-6013
Twin Falls, ID 208-733-1715Fax: 208-734-6924
ARNOLD MACHINERY CO.www.arnoldmachinery.com
Artesia, NM575-746-6592
El Paso, TX915-772-0613Fax: 915-772-1964
SIERRA MACHINERY, INC.www.sierraelpaso.com
HoustonHouston, TX713-937-3005800-865-6998Fax: 713-937-7541
LongviewLongview, TX903-758-5576Fax: 903-758-3079
Rio GrandeValleyMercedes, TX956-565-0100Fax: 956-565-1765
San AntonioSan Antonio, TX 210-648-4600800-966-4601Fax: 210-648-1282
ROL RemoteOilfieldLocationThree Rivers, TX 361-254-2317
AustinRound Rock, TX512-388-2529877-851-1026Fax: 512-388-1781
BuffaloBuffalo, TX903-322-5602Fax: 903-322-5605
CarmineCarmine, TX979-278-3570Fax: 979-278-3573
DallasDallas, TX214-819-4100800-227-6626Fax: 214-819-4102
Ft. WorthFt. Worth, TX817-626-2288866-966-4602Fax: 817-626-8983
ROMCO EQUIPMENT CO.www.romco.com
ColoradoSprings, CO719-392-1155Fax: 719-390-9604
Johnstown, CO970-669-6209Fax: 970-669-6280
Denver, CO303-288-6801Fax: 303-288-6809
Grand Junction,CO970-243-0722Fax: 970-243-0726
POWER EQUIPMENT COMPANYwww.power-equip.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 21
RUN STRONG.
Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2016 Doosan Infracore Construction Equipment America. All rights reserved. | 49040-5
Want to run strong equipment?Run Doosan.
Request FREE product information:
DoosanEquipment.com/Excavator1
ALASKA
CALIFORNIA
COLORADO
MONTANA
OKLAHOMA
TEXAS
WASHINGTON
dzeirohtAu
sreal Deanoso Dd
i-3709
W
-2709olS
2-709cnAqu Err Eolya T Tagg TiarCLA
il838-367-3
allsiaW
7795-26-2natdool
50506-72egahorc
yanmpo CtnemipquASKAL
2387615961aL
ach MageM
vgib.tacbob-902racSf otacboB
LIFAC
yatgiar.cwww
861738888 8 •2ediske
.cn I,.o Cyreinach
moc.rtoacrtyellav13966-64
otnemarotneamacr Sff S
AINROLIF
mo.ctnempiuqeroly
enHipqu EE&H
OLC
cos.www022-22-8909
Fo EttocS
magem.www2387-615-961
noserdenseicvre Stnemip
ODAOR
mco.piuqettco2730-163-00 8 ∙0
anantFotnemipqu E
mco.coyrenhicam8617-388-88 8 •2
ipLKO
2-604iBf Bt oacboB
OM
uqe-EH-2303
enH
ic SAOMHA
28202-52singlli
.cn, Iykg Sif BANATTANANO
mo.ctnempiu102-298-2
noserden
L TsaxeTTe
TE
uqe-EH4-819Tu
-7504homalkO
ipqu EE&H
in�uLackjrrebim T
SAXTE
mo.ctnempiu6662-544
aslTu
863-798-7yt Ciahom
seicvre Stnemip
sac.www-063
Che TdascaCHSAWWA
saxet.www6533-436-639L
te.nraderteadc2118-847-
silhaeCh.cn, Ierdare T Tr
NONGTIH
moc.kcajreimbts3411-363-7 87 ∙65
in�uL
Page 22 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
COLORADOWAGNER EQUIPMENT CO.
www.wagnerequipment.comAurora
303-739-3000Denver
303-433-2727 (Rental)Carbondale
970-963-7368 (Rental)Commerce City
303-286-2300 (Rental)Colorado Springs
719-390-7316 (Rental)719-635-1669
Granby970-328-2080 (Rental)
Gypsum970-328-2080 (Rental)
Hayden970-276-3781
Silverthorne970-262-3788 (Rental)
Fort Collins970-493-5005 (Rental)
Grand Junction970-245-6546 (Rental)
970-242-2834Pueblo
719-544-0088 (Rental)719-544-4433
Steamboat Springs970-871-1990 (Rental)
Windsor970-278-1750 (Rental)
Burlington719-346-7880 (Rental)
(719) 346-5132Durango
970-259-2001 (Rental)970-259-2001
Windsor970-278-1750
WASHINGTONN C MACHINERY
800-562-4735Seattle • 425-251-5800
Chehalis • 360-748-8845Fife • 253-896-0878
Monroe • 360-805-6000Mt. Vernon • 360-424-4292Wenatchee • 509-886-5561
Yakima • 509-248-2371
WYOMINGTRACTOR AND EQUIPMENT
Worland • 307-347-4747
TEXASANDERSON MACHINERY CO.
www.andersonmachinerytexas.comCorpus Christi • 361-289-6043
Manor • 512-272-8133Pharr • 956-781-5995
San Antonio • 210-661-2366Victoria • 361-575-8111
GEORGE P. BANE, INC.www.banemachinery.com
Tyler • 903-597-6641
MUSTANG CATwww.mustangcat.com
Houston • 713-460-2000Beaumont • 409-892-8412
Bryan • 979-775-7368Bryan • 979-775-0639
Channelview • 281-452-7368Conroe • 936-756-1110
El Campo • 979-543-3389Freeport • 979-233-7368Houston • 713-462-9993Houston • 713-228-7368
LaMarque • 409-935-7000Lufkin • 936-639-5551Lufkin • 936-632-6775
Nederland • 409-722-7368
WAGNER EQUIPMENT CO.www.wagnerequipment.com
El Paso915-493-5005 (Rental)
915-821-7651
NEW MEXICOWAGNER EQUIPMENT CO.
www.wagnerequipment.comFlora Vista
505-334-5522 (Rental)La Cruces
575-647-9700Albuquerque
505-938-2000 (Rental)505-345-8411
Hobbs575-393-2148 (Rental)
575-393-3665Clovis
505-235-3294 (Rental)Farmington
505-327-5331
Tunneling Resumes — With Conditionsated documentation submitted by STPover the past several weeks. Whilemining can resume, barging activitiesare still restricted pending submittal ofadditional documentation. STP willremove excavated soil by truck as theycontinue addressing the barging issue.Repairs to the pier that was damagedduring the Jan. 12 barging incidentwere completed.
Work was suspended for cause onJan. 14 per section 14.2 of the contract,which says the state can suspend workwithout liability to WSDOT under anumber of conditions, including thecontractor’s failure to “correct condi-tions unsafe for the project personnel orgeneral public.”
The suspension for cause onlyaddressed tunneling operations involv-ing the tunneling machine and the load-ing of barges at the site. It did not applyto the other ongoing work under thedesign-build contract with STP or anyother contracts being managed by theviaduct program.
After the suspension for cause wasput in place, WSDOT notified STP thatthey would need to confirm the follow-ing things before mining could resume:
• The tunneling machine is operat-ing as intended and meets the design-build contract’s technical requirements.
• All necessary training for staff onthe tunneling machine is complete.
• The tunneling work plan is updat-ed to address the over-excavation thatled to the sinkhole.
• Processes are in place to ensureSTP’s tunneling work plan is followed.
• STP updates its quality program toensure key quality program managersare involved in all tunneling activities.
Next StepsThe tunneling machine is currently
located west of the Alaskan WayViaduct, near South Washington Street.The conditional lift will remain in placefor approximately 160 ft. (49 m) of tun-neling. During this period — which isconsidered part of STP’s initial testingphase — STP will be operating withadditional communication withWSDOT and its tunneling experts. IfSTP demonstrates that its revised min-ing procedures are effective, crews willcontinue mining an additional 100 ft.(30.4 m) north to a planned mainte-nance stop. Once there, crews couldspend several weeks performing finalmaintenance before the machine tun-nels beneath the Alaskan Way Viaduct.
WSDOT will fully close SR 99through downtown for approximately twoweeks while the machine passes beneaththe viaduct. The closure date will depend
on the tunneling machine’s progress.
Statement From Gov. Jay Inslee“WSDOT, in consultation with its
team of tunnel experts, lifted the sus-pension of tunneling for cause and saidthat conditional tunneling shouldresume for 25 more tunnel rings. I con-cur with their decision, and WSDOThas notified the contractor,” said Inslee.
“The contractor has a plan for modi-fying tunnel operations to ensure posi-tive ground control. It has also madechanges to key personnel, and it has putin place protocols for quality control andassurance. The contractor now has anopportunity to show progress during thistest period, prior to tunneling under theviaduct and underneath Seattle,” he said.
Statement From ActingTransportation Secretary
Roger Millar“Seattle Tunnel Partners has
addressed the issues that led to the sus-pension for cause. This conditional liftof the suspension for cause will giveSTP an opportunity to demonstrate theeffectiveness of their updated miningprocedures,” said Millar.
“Above all else, this project hasalways been about safety. We must con-tinue our work to replace the viaduct, butwe have an obligation to ensure thatwork proceeds safely. We will continueto work with STP while taking whateversteps are necessary to protect the interestsof the public moving forward,” he said.
For more information, visithttp://www.wsdot.wa.gov/.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
TUNNEL from page 1
WSDOT photoAs part of the conditions for lifting the suspension for cause, STP will bepermitted to tunnel forward and install approximately 25 concrete tunnelrings.
WSDOT photoSeattle Tunnel Partners has received conditional permission to resumetunneling operations on the SR 99 Tunnel Project
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 23
ALASKANC MACHINERY
www.ncmachinery.com800-478-7000
Anchorage, AK • 907-786-7500Dutch Harbor, AK • 907-581-1367Fairbanks, AK • 907-452-7251Juneau, AK • 907-789-0181
Prudhoe Bay, AK • 907-659-6900Wasilla, AK • 907-352-3400
CALIFORNIAHAWTHORNE CAT
www.hawthornecat.comSan Diego • 800-437-4228
Lakeside/Escondido/Chula Vista 800-750-4228 (Rental)
HOLT OF CALIFORNIAwww.holtca.com
Pleasant Grove • 916-921-8969
HAWAIIHAWTHORNE CAT
www.hawthornecat.comHilo • 808-961-3437Kauai • 808-245-4058Kona • 808-329-4521Oahu • 808-677-9111
Oahu • 808-676-0227 (Rental)Maui 808-877-6538
MONTANATRACTOR AND EQUIPMENTBillings, MT • 406-656-0202Billings-Sgt. • 406-245-4426Bozeman • 406-585-5800Great Falls • 406-761-7900Helena • 406-442-2990
NORTH DAKOTATRACTOR AND EQUIPMENTWilliston • 701-572-8377
NEVADACASHMAN EQUIPMENT
www.cashmanequipment.com3300 St. Rose ParkwayHenderson, NV 89052
702-649-8777Fax: 702-633-4699Elko • 775-738-9871
Reno/Sparks • 775-358-5111
OKLAHOMAOCT EQUIPMENT
www.octequipment.comClinton • 580-323-3422
Oklahoma City • 405-789-6812Tulsa • 918-437-5085
Now Available with Tier 4 Final
Page 24 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Safety a Priority as CDOT Works to Stabilize SlopeThe Colorado State Patrol helped toclear out any semis and passengervehicles that were stuck in the canyon.According to CDOT, the aver-
age daily traffic for GlenwoodCanyon is around 300 vehicles perhour. Around the evening of theincident, the average traffic wasabout 150 per hour; the volumestarts to drop off significantly after11p.m. to less than 100 vehiclesper hour.An alternate route for west-
bound motorists was establishedthat added 146 mi. (235 km) andabout three hours to a regular tripfrom Wolcott to Rifle on I-70,which is 67 mi. (107.8 km) orabout 45 minutes. CDOT crews and contracted
rock fall workers began rock scal-ing at the location in an attempt tobring down any additional debris.As a safety precaution, crews alsoinstalled rock fall mitigation fenceon the westbound lanes. Rock scaling operations brought
significantly more debris downfrom the slope than originallyanticipated. Rock fall crewsworked to stabilize the slope inaddition to the mitigation fencing.Crews also worked to remove thedamaged wall and guardrail in thewestbound lanes.“Safety is our number one prior-
ity,” Amy Ford, CDOT communi-cations director, said. “There is alot of work yet to be done.”Weather created a challenge on
some days. “We could not fly a helicopter to
bring airbags and tools to the rockface,” said T. J. Blake, CDOTdeputy maintenance superintend-ent on one particular day. “Crewshad to haul everything up by handand that set us back several hours.”In addition to the challenges the
weather caused for the mitigationprogress, it also created furthermovement in the rock fall area thatcrews had to address. In addition toinstalling 160 lft. (49 lm) of newfencing on top of the barrier, crewsworked to bring down more rocksfrom the mountainside with prybars, airbags, and some explosives.Initial repairs were made to the
roadway, bridge, and guardrail asnecessary, while working towardsdesigning a follow-up mitigationproject and providing project costestimates. It is estimated that the
damage caused by this rockslideevent could range from $2 millionto $5 million.About 30 cu. yds. (23 cu m) of
material came down during the ini-tial natural slides on Feb. 15, withan additional 160 cu. yds. (122 cum) — about 16 loads of rock in atandem dump truck) — broughtdown by crews in the days sincethen. The largest rock that camedown during the natural slides wasthe size of an SUV.Once the interstate was deemed
safe for travel, a pilot car configu-ration was set up to direct single-lane, alternating traffic along a 6-mi. (9.6 km) section, with trafficbeing staged on the east side ofHanging Lake Tunnel and thecrossover at the Grizzly Creek restarea further west. The GrizzlyCreek, Hanging Lake andShoshone rest areas were closedduring the duration of the pilot caroperation. Bair Ranch (on the eastside) and No Name (west side) restareas remained open. “Certainly this is the longest clo-
sure that we’ve had for a scalingeffort in my experience working onthe Western Slope in the last 20
years,” said David Eller, regionaltransportation director. “The chal-lenge here is that you can only putso many people in the slide zone ata time and proceed safely.” Eller also noted that crews don’t
typically scale rocks of this size. “For example, in the last couple
of days we have dislodged fourboulders weighing between fiveand six tons each,” he said.On Feb. 25, a new configuration
was announced in a media confer-ence call.“We have some good news,”
said Ford. “We are excited toannounce that we are going to beable to open the corridor in ourhead-to-head operation by thisafternoon, and I’ll give you a senseof what that is and what it isn’t. Aswe told you, we thought we’d be inthe pilot car situation for severaldays — we have certainly beenthere now most of this week, andwe have been working very, veryhard. We’ve continued to do someof the rock fall mitigation on theroad as we come in and continue toprotect this environment — we arein the process of placing fences onthe westbound lane, and we will be
continuing to do that here throughthe next few weeks. “Our helicopter has been flying
in and out as we have been gettingstarted on the permanent rock fallmitigation and that is going to be along term ongoing process, andmore specifically, on the eastboundlane, we had several holes on ourshoulders where they had beenpushed through by the rocks, andwhat we have been able to do is toplate those and verify that they aresafe. We have gone in and movedbarriers and the like, and what wehave been able to do now is startingthis afternoon, by about 4 [p.m.] orso, we will be opening the corridorin a head to head configuration.”Ford noted that they would be in
a restricted environment as far ashow wide the lanes are.Specifically, there are 12-ft. (3.65m) wide lanes, but because of rockand the condition of the plates cov-ering up some of the holes, thereare no shoulders.
“So because of that, from a safe-ty environment perspective, we aregoing to continue to run the head-to-head traffic behind a pace car —not a pilot car — going eastbound,and there will be a pace car goingwestbound,” she said. “So whatcars will do as they come into thisenvironment, is they will still stopat a controlled space as you’recoming into that 6-mile corridor —that’s where we’ve had the stopsbefore. A pace car will take themdown the road and then releasethem on the other side, and they’ll
turn around and bring back thenext side. There will be twocars going in this configurationin a 24-hour operation, whichmeans that we will not be hav-ing the long term closures from9 a.m. to 4 p.m. throughout themiddle of the day the way wehave been for this last week.”Ford noted that there would
still be delays and intermittentclosures due to the additionalwork occurring in the area. “For instance, if we’re flying
in our helicopter and we needto land for getting equipmentand that kind of thing on themountain, we will be holdingthe traffic,” she said. “Whenwe do all of that, with that addi-tional work, we will do a lot ofadvance notification on oursignage and the like to let peo-ple know how long that closure
will be, but it will not be a 9 to 4closure — a shorter term closure.What we do hope though isbecause we will be able to run thehead-to-head traffic in the 24-hourperiod now that we won’t have thelong queues that have been hap-pening as a result of people waitingfor us to open up the pilot car situ-ation. So we’re very excited tohave gotten to this point.”Tracy Trulove of CDOT noted
that four pace cars would be work-ing, including two Colorado Statepatrol troopers and two from a traf-fic control company. Ford noted that it will be about a
month or so before they are able toopen two lanes in each direction —back to the original configurationof the highway.
(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG
CDOT from page 1
Tracy Trulove/Colorado Department of Transportation photoCDOT specialty units downsize one of the boulders on the east-bound deck.
Tracy Trulove/Colorado Department of Transportation photoBart Necessary, CDOT residentengineer, inspects the westbounddeck for damage.
ColoradoDepartment ofTransportation photo
A tempo-rary rock-fall mitiga-tion fenceis in place.
International Truck launched theInternational HX Series, a new line of Class8 premium vocational trucks designed todeliver the strength and endurance requiredfor the severe service industry. This is thefirst all-new vehicle introduced byInternational Truck since 2010.“The launch of the HX Series is an oppor-
tunity for International to recapture a leadingposition in the vocational market — a seg-ment we previously led,” said Troy Clarke,president and CEO, Navistar Inc. “Thelaunch of the HX Series underscores ourcommitment to innovation, our dedication touptime and our position as a leader withinthe industry.”The new truck series will replace the
International PayStar model. “The design of our new HX Series is
based on in-depth discussions with leadingusers of severe service applications,” saidBill Kozek, president, Truck and Parts,Navistar Inc. “Each of the four models in theseries has been engineered to deliverunmatched performance for the most pun-ishing jobs, while making operators moreproductive.”International is taking orders for this vehi-
cle immediately. The first vehicles will bedelivered this spring.
HX Series Addresses Full Rangeof Applications
Four HX Series models will be offered,with both set-forward and set-back front axlemodels in either short or long hood, depend-ing on the application. • The HX515 is a 115 in. (292 cm)
BBC set-forward axle straight truck with pri-mary vocations including concrete mixer,construction dump, refuse/roll-off and crane.• The HX615 is a 115 in. BBC set-
back axle truck or tractor with primary voca-tions including construction dump, concretemixer, platform stake/crane and refuse/roll-off.• The HX620 is a 120 in. (305 cm)
BBC set-back axle truck or tractor with pri-mary vocations including heavy haul tractor,construction dump and platform stake/crane.The HX520 is a 120 in. BBC set-forward
axle truck or tractor with primary vocations
including heavy haul tractor, constructiondump and platform stake/crane. The HX515 and the HX615 models are
powered by Navistar N13 engines, while theHX520 and HX620 models offer theCummins ISX15 engine.Each model in the HX Series delivers on
four key principles of design: maximumstrength and durability, driver productivity,bold styling and superior uptime.“The HX Series combines aggressive
styling, unstoppable capability and driver-centric features to appeal to vocational truckowners in a whole new way,” said DennyMooney, senior vice president, global prod-uct development, Navistar Inc. “All youneed to do is get behind the wheel of thistruck and you will see that this is a majorstep forward in design, all with the driver inmind.”
Strength and Durability• Each model has a huck-bolted
frame and cross members, which producesuperior clamping force to minimize vibra-tion and maximize structural integrity. • An available 12.5 by .5 in. (31.7 by
1.3 cm) single rail delivers 3.5 million RBMat 13 percent less weight than a 10 in. (25.4cm) rail, allowing room for a heavier load.• The industry's only dedicated voca-
tional aluminum cab offers better durabilitythan steel.
• The three-piece Metton hood isstronger and lighter than fiberglass and isdesigned to resist cracking. • Doors feature stainless steel piano
hinges for superior strength. • The industry's strongest tow pin is
rated at 150,000 lbs. (68,039 kg) for extremerecovery towing.
Driver Productivity• The maneuverability and visibility
of each truck in the HX Series is best-in-class. • A 40-degree wheel cut on both
right and left turns allows for improvedmaneuverability, while angled fenders pro-vide greater wheel clearance to help powerthrough challenging grounds. • The hood’s low angle makes for
enhanced front forward visibility, and thelarger rear window compared to the compa-ny’s prior model allows for superior rear vis-ibility. • The HX Series is equipped with the
all-new DriverFirst cab air suspension,designed with 52 in. (132 cm) springs to pro-duce a supremely comfortable and quiet ridereducing driver stress and improving pro-ductivity.• For faster and more convenient
access, the HX Series hood has an assistmechanism requiring little effort to open.
Bold and Aggressive Styling• Hoods and grilles across the entire
lineup are designed to look great and standout on the road and at the work site.• Customers will have options for
bright finishes.• The interior was ergonomically
designed to offer more room for driver com-fort and productivity. • The contoured door handles add
hip room and storage space.• The central console is angled for
easy reach to controls.• There is easy access to cup holders
and the overhead console. • The standard tilt/telescoping steer-
ing column adjusts to accommodate any sizedriver.• Gauges are designed and posi-
tioned to deliver optimal visibility and vitalinformation at a glance. • LED lighting is standard through-
out, as are air conditioning, power windowsand power locks.
Industry-Leading Uptime• Consistent with the International
mission, the HX Series has been tested andvalidated to provide industry-leadinguptime, with the sort of durability andendurance that customers demand, accord-ing to the manufacturer. • At the Navistar Proving Grounds in
Indiana, the HX Series was subjected toaccelerated life testing, which simulates 10years of wear and tear and vibration inextreme duty cycles. • Vehicles underwent staggered
bumps testing, which generated torsionaltwist in the chassis, to ensure suspensioncomponents were stabilized and equalized. • Each model also was subjected to
severe duty ditch event, in which a fullyloaded vehicle is run through four ditchevents that are 12 in. (30.5 cm) in depth. For more information, visit
InternationalTrucks.com/HXSeries. (This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
The HX515 is a 115 in. (292 cm) BBC set-forward axle straight truck with primaryvocations including concrete mixer, construction dump, refuse/roll-off and crane.
International Truck Introduces All-New HX Series
Pages 25-27To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
SECT IONTrucks & Trailers
Page 26 • March 6, 2016 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Mack Trucks to Serve as ‘Official Hauler of NASCAR’Mack Trucks and NASCAR announced a
multi-year agreement designating Mack asthe “Official Hauler of NASCAR.” Mackmade the announcement during NASCAR’sDAYTONA 500 media day event. As part ofthe agreement, Mack provided a fleet of cus-tom-designed Mack Pinnacle sleeper mod-els spec’d to answer the challenges of thegrueling NASCAR schedule.“Mack and NASCAR are two fundamen-
tally American brands, and we couldn’t bemore excited to join forces and serve as the‘Official Hauler of NASCAR,’” said JohnWalsh, Mack vice president of marketing.“This partnership enables us to get Mack,our trucks and our technology in front ofmillions of NASCAR fans, a significantnumber of whom are part of the transporta-tion industry.”Throughout the 36-race, 10-month long
season, NASCAR haulers travel thousandsof miles between race locations, deliveringtons of critical technology and equipment tohelp ensure a successful race weekend.NASCAR’s fleet of Mack Pinnacle modelsembarked on its inaugural journey toNASCAR’s season-opening race, the DAY-TONA 500, at Daytona InternationalSpeedway in Florida.“The Mack Trucks brand has been a part
of American culture for more than a centuryand is globally recognized for manufactur-ing a best-in-class product,” said StevePhelps, NASCAR executive vice presidentand chief marketing officer. “The custom-designed Pinnacle models are masterfullyengineered and we are proud that they will
lead the NASCAR convoy to the track eachrace weekend.”Each of NASCAR’s custom-spec’d
Pinnacle models is equipped with Mack’s13-L MP8 engine that delivers 505 hp. Thetrucks also are outfitted with the MackmDRIVE automated manual transmission
that helps boost fuel efficiency and produc-tivity without sacrificing performance. ThePinnacle model, like all Mack trucks sold inNorth America, is built in the U.S.A.The fleet also is armed with Mack
GuardDog Connect, a telematics system thatbrings the right blend of technology and peo-ple together to maximize uptime. Acting asan onboard pit crew, GuardDog Connectproactively monitors critical fault codes thatcould shut a truck down.When a potential issue is detected,
GuardDog Connect automatically notifiesMack OneCall agents at the 24/7 MackUptime Center, as well as the driver and des-ignated fleet contact. An action plan forrepairs, a check for available parts at thenearest service center and detailed repairinstructions also are completed, all while thetruck is still on the road.Support for the fleet of Pinnacle models
will be led by Transource Truck & TrailerCenter, a Mack dealer with seven locationsacross North Carolina. Mack partnered withTransource in providing the trucks.For more information, visit www.mack-
trucks.com.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Mack Trucks and NASCAR announced a multi-year agreement that makes Mack the“Official Hauler of NASCAR.” As part of the agreement, Mack provided a fleet ofMack Pinnacle models to transport critical technology and equipment from race torace throughout the grueling NASCAR season.
XL Specialized Trailers Offers Low-Profile HDG Model
XL Specialized Trailers offers theXL 120 low-profile hydraulicdetachable gooseneck (HDG) trailerin its construction equipment haul-ing line. This model is rated at110,000 lbs. (49,895 kg) in 10 ft. (3m) and 120,000 lbs. (54,431 kg) in16 ft. (4.8 m) in the center of thedeck. Engineered for heavier con-struction equipment, this model isdesigned with user-friendly features.The trailer features a low-profile
neck construction that contractorsneed to load their equipment overthe neck. The 13-ft. (3.9 m) long
gooseneck has a 36-in. (91 cm)long flip neck attachment for usewith a four-axle truck. This set-upoffers a 146-in. (371 cm) swingclearance, allowing weight to bedistributed to the steer axle of thetruck. The five-position variableride height allows users to adjustthe neck height to fit their variousloads.The XL 120 Low-Profile HDG
comes in the standard 53 ft. (16 m)overall length, or a 55 ft. (16.7 m)version for even longer loads. With54-½ in. (138 cm) axle spacing, the
53-ft. (152 cm) long trailer has amain deck that offers a full 26 ft.(7.9 m) in the well and 60-in. (152cm) axle spacing also is available.The main deck is constructed withfour 16-in. (40.6 cm) tall, fully-cambered I-beams connected with10-in. (25.4 cm) and 4-in. (10 cm)stubbed junior I-beams on 12-in.(30.5 cm) alternating centers formaximum strength, as well as 24-in. (61 cm) loaded deck heightwith 8 in. (20 cm) of ground clear-ance. The trailer also features stan-dard 31-in. (78.7 cm) front flip
ramps, seven bent D-rings and 12chain drops per side, and heavy-duty swing-out outriggers on 24-in. centers to combine for a com-pletely equipped main deck, readyfor any piece of equipment.The last three cross members in
the main deck are recessed to makea bucket well for the bucket of anexcavator to sit low in withoutdamaging the cylinder while theopen boom trough in the rearbridge provides a place for the armto ride safely. The 32 degree rearbridge transition features traction
aids for loading. The rear deck isprepped for a 2-axle booster, result-ing in an extremely flexible trailer,allowing for more varied loads thatare able to go through more areas.The 3-axle trailer can be set up as astraight 4-axle using a pin-on or asa 3 + 2 using a spreader bar withtwo axles at the end.For more information, visit
xlspecializedtrailer.com.(This story also can be found on
Construction Equipment Guide’s
Web site at www.constructionequip-
mentguide.com.)
The XL 120 Low-Profile HDG comes in the standard 53 ft. (16 m) overall length, or a 55 ft. (16.7 m) version for even longer loads.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • March 6, 2016 • Page 27
Trail Ox End Dump TrailerSeries Adds Job Versatility
The Trail Ox Series of end dump trailersfrom Ox Bodies adds on-the-job versatilityfor a range of hauling applications, includingsand-to-large aggregates, riprap and asphalt.A variety of configurations and options areoffered to meet specific hauling needs.Designed for long-term reliability and prof-itability, the product line comes in full frameand quarter frame versions. The heavy-duty
full frame easily hauls large loads indemanding applications, while the lighterweight quarter frame is ideal for mid-rangehaul distances.
Trailers feature a width of 96 in. (244 cm),side heights of 36 to 60 in. (91 to 152 cm),lengths of 22 to 36 ft., and capacities up to51.2 cu. yds. (39 cu m). All trailers have acontinuous seam-welded design that reduces
debris collection and water-related body and chassis cor-rosion. In addition to a widerange of high-end features,numerous product-enhanc-ing upgrades also are avail-able. Trail Ox trailers arebacked by a two-year war-ranty.
For more information, call800/844-2519 or visitwww.oxbodies.com.
(This story also can be
found on Construction
Equipment Guide’s Web site
at www.constructionequip-
mentguide.com.)
Trailers feature a width of 96 in. (244 cm), side heightsof 36 to 60 in. (91 to 152 cm), lengths of 22 to 36 ft., andcapacities up to 51.2 cu. yds. (39 cu m).
2016 Ford F750, 270 HP, Automatic, Loaded with Options, 33,000 GVW Comes with NewMaverick 6 Spray System, Cab Controls, Suction/Canal Fill, Expoxy Coated Tank, Loaded andavailable NOW! ..................................................................................................................CALL
2016 Ford F750 w/New 2000 Gal System
2008 Peterbilt 365, Cat C-13 at 430 HP, 8LL, 16K Front, w/New 4,000 Gallon MaverickWater System, Loaded w/All of the Options, Ready NOW! ..........................................$79,500
Low Miles / California Compliant!
2006 KenworthT800, Cat C-13 @ 430 HP, 44,000Rears, 16,000Fronts, Low Miles,In ProductionNOW w/New4,000 Gallon Maverick WaterSystem, Has AllThe Options..............................CALL
2006 KW T800 / Heavy Specs/In Production
Rick Dohrn(480) 704-1800
Mobile: (602) 432-1619
Chandler, Arizonawww.mavericktrucks.com
Maverick Equipment specializes
in late model 2,000 - 4,000 gallon
water systems on Peterbilt and
Kenworth trucks.
2015 Custom Built2,500 Gal & 4,000 Gal Tanks on the Ground
in ‘COMPLETE - DROP ON TANKS
Page 28 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
RT9150E rough-terrain craneAt Grove, we provide high-performance features, reliable / support and a quality product lineup – because cranes are all we do. With rough-terrain models ranging from - USt, we’ve got a crane to handle any jobsite.
Featured is the RTE – its USt capacity and ft. boom combination provide the best capacity and longest boom in its class.
For more information, visit www.manitowoccranes.com
Tilt cab Superior boom design Removable outrigger boxes
Need Financing?
8600 Calabash Ave.Fontana, CA 92335562-286-6618
Fax: 909-356-1340275 W. Larch RoadTracy, CA 95304209-597-3824
19602 60th Avenue NEArlington, WA 98223253-254-7950
91-210 Kalaeloa Blvd.Kapolei, HI 96707808-682-7263
6720 Arctic Blvd.Anchorage, AK 99518
855-342-72633521 Alken Street
Bakersfield, CA 93308855-927-2637
Western Pacific Crane & Equipmentwww.wpcrane.com
Kirby-Smith Machinery, Inc.www.kirby-smith.com
Oklahoma City, OK800-375-3339
Tulsa, OK800-375-3733Kansas City, KS877-851-5729St. Louis, MO
866-279-1392
Belgrade, MT406-388-2308Billings, MT
406-259-9720Boise, ID
208-388-3323Salt Lake City, UT801-974-0388
St. George, UT435-674-2994Las Vegas, NV702-320-6500Phoenix, AZ
602-232-0600Tucson, AZ
520-770-1120
Albuquerque, NM505-764-8100
Dallas, TX972-986-0910Houston, TX
713-433-6411
H&E Equipment ServicesHE-equipment.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 29
UNTIMED POWER BOOST: STRENGTH ON YOUR SCHEDULEWe know what it’s like to sit in the operator’s seat when you hit solid rock. The power boost button on most excavators can deliver the extra force you need to break through – but only in short bursts. We knew there had to be a better way, so we took our jobsite experience and collaborated with our engineers. The result is an untimed power boost that comes standard in all KOBELCO conventional excavators from the SK210LC to the SK500LC. It provides all the extra muscle you need continuously so you can power through the toughest jobs without interruption.
MINI SHORT RADIUS CONVENTIONAL
KOBELCO-USA.COM
TRI-WEST TRACTOR6281 Southfront Rd.Livermore, CA 94551
925-455-8200 • Fax: 925-455-8220www.tri-westtractor.com
Orion Equipment18060 Des Moines Memorial Drive
Seattle, WA 98148800-280-8124
www.orion-equip.com
Amarillo Machinery6100 I-40 E.
Amarillo, TX 79118806-372-7800
www.amarillomachinery.com
BANE MACHINERY, INC.2449 Manna Rd.Dallas, TX 75520214-352-2468
Tyler, TX903-597-6641Fort Worth, TX817-847-5894
www.banemachinery.com
Scott Equipment14635 Valley Blvd.Fontana, CA 92335909-822-2200800-316-0327
www.scottequip.com
Page 30 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 31
Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,
•
•
•
• Extended service intervals
•
•
•
Model # Operating Weight Net hp @ rpm Tail Swing
*75 X3 and 80 X3 engines are Final Tier 4
Page 30 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 31
Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,
•
•
•
• Extended service intervals
•
•
•
Model # Operating Weight Net hp @ rpm Tail Swing
*75 X3 and 80 X3 engines are Final Tier 4
Page 32 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KIRBY-SMITHMACHINERY, INC.
www.kirby-smith.com
6715 W. RenoOklahoma City, OK 73137
800/375-3339Fax: 405/787-5973
12321 E. Pine St.Tulsa, OK 74116800/375-3733
Fax: 918/437-7065
1629 Vision Dr.Abilene, TX 79602877/577-5729
3922 I-40 EastAmarillo, TX 79103800/283-1247
8505 So Central ExpwyDallas, TX 75241800/753-1247
1450 NE Loop 820Fort Worth, TX 76106
877/851-9977
3201 E Slaton Hwy.Lubbock, TX 79404
866/289-6087
7301 East I-20Odessa, TX
877/794-1800432/333-7000
© 2008 ESCO Corporation.
To view our Business Calendar online, go to www.constructionequipmentguide.com.
AGC of MN - Minnesota Transportation ConferenceAnnual Convention Tuesday, March 8, 2016 through Thursday, March 10, 2016
St. Paul River Centre, MNContact: Denise Woods: [email protected], Phone: 651/796-2189Minnesota’s Transportation Conference, the largest transportation event in thestate, explores the latest transportation innovations and provides attendeeswith the chance to network with other professionals. Individuals from multi-ple transportation-related disciplines and organizations are encouraged toattend.
February 23, 2016 (ends March 22)STP Unit 4 – Contract Documents (Buffalo) Time: 5:30 PM to 8:30 PM (Tuesdays for 5 weeks)Location: Construction Ex. of Buffalo & WNY, 2660 William Street,Cheektowaga, NYSupervisory skill – or the lack of it – directly affects every company’s bottomline. The Supervisory Training Program (STP) developed by AGC, is designedspecifically to meet the needs of the construction industry. Developed, updat-ed, and field-tested by and for contractors, the Program consists of 6 cours-es that focus on the knowledge and skills that every supervisor must have tobe an effective manager of people, time, equipment and materials.
CANADIAN RENTAL MARTSAVE THE DATE!The Canadian Rental Mart returns MARCH 8 – 9, 2016Canada’s national show for the equipment and party rental industries returnsto the Toronto Congress Centre March 8 – 9, 2016. The Rental Mart contin-ues to be Canada’s largest equipment expo and education forum for the rentalindustry. The 2016 Canadian Rental Mart will bring back all the great ele-ments attendees have come to expect. Once again, exhibitors will be offeringshow-only special offers, not available at any other time. DON’T MISS OUT!Bustling Toronto, Ontario provides the backdrop to Canada’s biggest rentalshow and accommodations are conveniently located across the street at theluxurious International Plaza Hotel. The Canadian Rental Mart is Canada’snational trade show for the equipment and party rental industries, drawinghundreds of rental operators from across the country to Toronto biennially. Formore information on this event, please call: 519/429-5199; Fax: 519/428-3094; CanadianRentalMart.com.
AGC of AMERICAThe Associated General Contractors of AmericaGrab your HAT and BOOTS and join your fellow construction industry profes-sionals at the 97th Annual AGC Convention, March 9-11, 2016 at the GrandHyatt San Antonio, Texas. As our premier event each year, the AGC AnnualConvention and Technology & Construction Solutions Expo is the ideal oppor-tunity to see everything AGC can do for you and your business. Join us formore than 15 education breakouts, terrific networking events and industryleading speakers, all in a perfect location for business, culture, family and fun… San Antonio. Learning from and teaching others is important, if not the key,to success. This is especially true in the construction industry, where buildingtechniques, business strategies, technology and regulations are constantlyevolving. Join your peers at the AGC Convention and surround yourself withpeople who are coping with the same professional challenges you are andmake connections that impact your business. For more information on thisevent, contact AGC of America, 2300 Wilson Blvd., Suite 300, Arlington, VA22201. Phone: 703/548-3118; [email protected]; www.AGC.org.
CGA 811 EXCAVATION SAFETY CONFERENCE & EXPOExhibit Dates: March 8 to 10, 2016Place: The Mirage, Las Vegas, NVPlan to attend the CGA 811 Excavation Safety Conference & Expo.Common Ground Alliance is the leading organization, in a collaborative effortwith industry/organizations, to reduce damages to underground facilities inNorth America. Common Ground Alliance is a member-driven associationwith nearly 2,000 members attending the CGA 811 Excavation SafetyConference & Expo. Why exhibit at the 2016 CGA Conference? Check out: https://vimeo.com/131812559.For conference details: http://www.cgaconference.com/.We look forward to being of service in Las Vegas. CGA Expo/Sponsorship ManagementAmanda H. Bill, VP Business DevelopmentExhibit Promotions Plus, Inc.Ellicott City, MD 21042Phone: 410-997-0763Phone: 301/596-3028Fax: 410/997-0764www.epponline.com [email protected]
SAVE THE DATE!!! ATTEND THE 97th ANNUAL AGC CONVENTION97th ANNUAL AGC CONVENTIONMARCH 9 – 11, 2016Grand Hyatt San AntonioSan Antonio, Texas Building the Present, Shaping the FutureRegister by February 29, 2016 and Save!Grab your hat and boots…and join your fellow construction industry profes-sionals at the 97th Annual AGC Convention, March 9-11, 2016 at the GrandHyatt San Antonio. As the premier construction convention each year, theAGC Convention and Technology & Construction Solutions Expo is the idealopportunity to see everything AGC can do for you and your business. Join usfor more than 15 education breakouts, terrific networking events and industryleading speakers, all in a perfect location for business, culture, family andfun…San Antonio.
AGC of MNErosion Control and Storm Water Permit Compliance TrainingOn March 11, 2016, AGC and the University of MN will offer a one-day ses-sion on erosion control and storm water permit compliance, with a utilityinfrastructure construction focus. This training module is the only Minnesotautility construction industry training opportunity that is offered in partnershipwith the University of Minnesota Erosion Control and Storm Water CertificationProgram. Upon completion of the training and passing a written exam, allattendees will receive a certification card issued by the University ofMinnesota that is valid for three years. For more information on this Trainingsession, contact AGC of MN, Denise Woods at 651/632-8929 [email protected], http://www.agcmn.org.
Associated General Contractors of Las Vegas (AGC of Las Vegas) Mechanics Lien/Payment Remedies and Defenses SeminarWednesday, March 16, 2016AGC Training Room150 N. Durango DriveLas Vegas, Nevada 89145In the five (5) years since the economic downturn began, changes toNevada’s Construction Law have not rested. As signs of recovery finally beginto appear, Developers, Contractors, Subcontractors, Suppliers, and other con-struction professionals will benefit from this seminar on how to protect them-selves under Nevada Mechanics lien and construction laws, as well as whatchanges have occurred – and there have been some changes. In this semi-nar, you will be updated on Nevada’s mechanics lien, prompt payment andother construction law for 2015.For more information on this seminar, contact AGC, Las Vegas Chapter, LasVegas, NV 89145. Phone: 702/796-9986; Fax: 702/796-1629.
AGC of MNConstructing Success 2016AGC of MN members are invited to attend the 2016 Constructing Success“Taking Care of Business” Conference on Thursday, March 17, 2016, at theMcNamara Alumni Center at the University of Minnesota. This every other yearevent will feature topics important for running a successful business. Formore information on this conference, contact AGC of MN, Denise Woods at651/632-8929 or [email protected], http://www.agcmn.org.
OHIO OIL AND GAS ASSOCIATION (OOGA) WINTER MEETINGMARCH 16 – 18, 2016HILTON COLUMBUS AT EASTONFor the 69th year, OOGA brings together the top industry leaders from Ohio andthe nation to provide the most current state of the oil and gas industry in busi-ness sessions and the trade show. The Winter Meeting is the principle busi-ness meeting of the association, the premier networking event of the year.This annual gathering includes:
. Business Sessions
. Trade Show
. Updates on State and Federal Activities
. President’s ReceptionContact us:A professional staff at the association’s headquarters, located in Columbus,Ohio, directs day-to-day operations and administers the programs and serv-ices available to OOGA members. If you have any questions, please feel freeto contact us. Main office: 88 E. Broad Street, Suite 1400, Columbus, Ohio43215. Phone: 614/824-3901; Fax: 614/824-4329.
WORLD OF ASPHALT SHOW 201622 MAR 2016 – 24 MAR 2016MUSIC CITY CENTERG, 150 4TH AVENUE NORTH #250G, NASHVILLE, TN, USAPHONE: 615/401-1400World of Asphalt Show 2016 is the leading exposition and educationresource for the asphalt industry. The event showcases in-depth industry-focused educational programming and comprehensive exhibits that show-case the latest technologies and innovations in asphalt-related equipment,products and services. Over 400 exhibitors are expected at this event toshowcase their products and services. Visitor profile of this event includespavement maintenance contractors, asphalt and aggregate producers, fleetmanagers, highway contractors, traffic safety professionals, plant operators,public officials. The recurrence of World of Asphalt Show is annual.
World of AsphaltDates: Tuesday, March 22, 2016 to Thursday, March 24, 2016Place: Music City Center
Nashville, TN, United States of AmericaWorld of Asphalt is North America’s leading International Exposition andConference for the Asphalt, Highway Maintenance and Traffic SafetyIndustries. The event features in-depth industry-focused educational pro-gramming and comprehensive exhibits that showcase the latest technologiesand innovations in asphalt-related equipment, products and services.Contact Information:Organization: AEMA (Asphalt Emulsion Manufacturers Association)Phone: +1 (410) 267-0023Email: [email protected]: http://www.aema.org/
West Virginia Construction & Design Exposition 2016The Region’s Largest Trade Show for the Construction & Design IndustryDates: Wednesday, March 23, 2016 to Thursday, March 24, 2016Place: Charleston Civic Center
Charleston, West Virginia, United States of AmericaWest Virginia Construction & Design Exposition is a 2-day event that is beingheld from 23 March 2016, Wednesday to 24 March 2016, Thursday. Thisevent is being organized by Contractors Association of West Virginia. Thevenue of this event is Charleston Civic Center which is based in Charleston,
West Virginia, United States of America. West Virginia Construction & DesignExposition will showcase a wide range of products and services related tobuilding & construction sectors from the leading exhibitors. Full details of theshow are available at www.wvexpo.com. For additional information, con-tact EXPO at 304/342-3976 or [email protected] or find them onFacebook.
Asphalt Paving Association of Michigan 2016 ConferenceDates: March 29 & March 30, 2016Where: Kalamazoo, MichiganAsphalt Pavement Association of Michigan 60th Annual Asphalt PavingConferenceThe 60th Annual Asphalt Paving Conference will be held on March 29-30,2016 at the Radisson Plaza Hotel & Suites in Kalamazoo, Michigan. Theroom block deadline of March 7, 2016 is fast approaching. To make yourhotel room reservation phone 269/343-3333 and tell them you are with “TheAsphalt Pavement Association of Michigan” so that you will get the discount-ed rate of $129.00. Educational Session Topics will include:Best Practices for using RAPPerpetual PavementsAchieving Pavement DensityNational Asphalt Research and Technology InitiativesMDOT Update and more…Registration Rates:APAM Members: $140.00Non-Members: $160.00On Site: $170.00All Conference questions can be directed to Beth Wilson at the APAM Office byemail at [email protected] or by phone at 517/323-7800 or 800/292-5959 (MI).
2016 OHIO ASPHALT EXPODates: March 30 & March 31Flexible Pavements of Ohio is an association for the development improve-ment and advancement of quality asphalt pavement construction. Contact:toll free: 1-888-4HOTMIX or email: [email protected]. Dates: Wednesday, March 30, 2016 to Thursday, March 31, 2016Event Link: http://www.ohioasphaltexpo.orgEvent Contact: Andrew GallEvent Location: Columbus/Polaris Hilton Hotel, 8700 Lyra Drive,
Columbus, Ohio 43240The Asphalt Expo if Ohio’s premiere asphalt pavement event with multipleconcurrent educational sessions and an indoor and outdoor trade show andexhibition. If you construct, inspect, manage or maintain local or privatetransportation infrastructure the Ohio Asphalt Expo has the information youneed to ensure a successful, long-lasting asphalt pavement.
Mid-America Trucking Show 2016Date: March 31, 2016 to April 02, 2016Place: Kentucky Fair & Exposition Center
937 Phillips Lane South Wing CLouisville, Kentucky, USA
The 2016 Mid-America Trucking Show will be held March 31 to April 2, 2016at the Kentucky Exposition Center. MATS 2016 – The Mid-America TruckingShow is the largest annual heavy-duty trucking industry event in the world.As the industry’s premier business venue, each year the show offers attendeesthe best opportunities for exploring new products and services, as well asinsight into a variety of current industry issues via seminars and specialevents. The Mid-America Trucking Show hosts all major truck, diesel engineand trailer manufacturers and representatives from all facets of the truckingindustry from all over the world. For more information:Phone: 800/626-2370 or Int’l 502/899-3892Fax: 502/899-3952
BusinessCalendar
see OLSON page 36
Founded in 1980 by Roger Olson, RD Olson Manufacturing is head-quartered in Kelso, Wash. Manufacturing was started on the current sitein 1982, relying on Roger’s expertise in heavy steel fabrication, road
construction, crusher and rock quarry operation. Currently the company has 102,000 sq. ft. (9,476 sq m) of manufacturing
space located in eight separate buildings. Each building is dedicated to a spe-cific manufacturing function. The facilities are located on slightly more than12 acres. RD Olson offers heavy-duty fabrication for the rock crushing, screening
and recycling industries. (This story also can be found on Construction Equipment Guide’s Web
site at www.constructionequipmentguide.com.) CEG
RD Olson Offers Customization of Various Machines
This system for Bosworth Trucking in Vernon, BC,Canada, is a rock and wood separator. Now on ajob site, the extensive amounts of gravel and rockhauled in can be run through this wash plant/sep-arator, which removes the lighter wood productsfrom the rock. It can be recycled and used again onthe next job area.
Pages 33-43
Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Many different sizes and configurations of crushing and screeningplants are made in this assembly area. RD Olson can accommodatecustomer requests for forward- or rear-facing plants, as well as othercustom orders. This jaw crusher is being trailer mounted.
With a large facility, RD Olson can stock plants ready for shipment to dealers and customers across the country.
With an extensive parts warehouse to manage, theteam of John Kehrli (L), purchasing agent, andKris Cox, parts manager, keeps everything runningsmoothly.
Many states are now requiring the loggingindustry to use heavy-duty forestry cabs.RD Olson installs cabs as shown on thisDoosan excavator.
Page 34 • March 6, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Global Launch Scheduled...
Powerscreen to Launch Warrior 1400XE at bauma 2016
Powerscreen will host its global launch of the new electri-cally driven Warrior 1400XE mobile heavy duty screen atbauma 2016. From April 11 to 17, Powerscreen will exhibitthe mammoth Premiertrak 600 jaw crusher alongside thenew screening model at the Terex booth FM711.Commenting on the line-up, Colin Clements,
Powerscreen global product line director said, “This is a veryimportant year in Powerscreen’s history. In 2016 we mark 50years of power and success and what better way to start thecelebrations than with a global machine launch at bauma onthe industry’s largest stage. Our team of crushing and screen-ing experts look forward to meeting new and existing cus-tomers at the show to share how our equipment and featurescan add real value to their businesses.” Product Manager of Powerscreen Oliver Donnelly
explained some of the thinking behind the new model. “The electrically driven Warrior 1400XE shows our
response to customer demand and our commitment toembracing a more environmentally aware approach to inno-vation. This latest development utilizes a combination ofhighly efficient electrical components and clever design todeliver the lowest possible cost for every ton of materialprocessed through the machine. While we are excited aboutthe low running costs, we are proud to have produced amachine where customers will also quickly see dramaticsavings in the costs associated with maintenance and servic-ing. Versatility has definitely not been compromised.”
Powerscreen Warrior 1400XE ElectricallyDriven Screen
The Warrior 1400XE has been designed to meet the needsof customers for whom electricity is a preferred powersource and opens up the possibility to run the machineindoors. It can be powered by electricity generated by otherPowerscreen models, e.g., the Premiertrak 600. The Warrior
1400XE builds on the success of the standard Warrior1400X model with its single shaft, high amplitude 12 by 4.5ft. (3.6 by 1.25 m) screenbox and the chassis riser option giv-ing enhanced stockpiling capacity. It also has several impor-tant service and maintenance features including thePowerscreen “Stay-Clean” system under the feeder and ajack-up screen system allowing easy access for screen mediachanges. Depending on feed material the output capacity forthis machine is up to 551 tons (500 t) per hour.The main benefit of the Warrior 1400XE is the variety of
power options available. It can be self-powered with its own72kVA generator, or be connected to a mains electricity sup-ply for even further reductions in cost of ownership. For cus-tomers who understand the advantages of a packaged solu-tion, the Warrior 1400XE also can be powered from an elec-tric drive crusher with a barely noticeable effect on the crush-er fuel consumption, according to the manufacturer. This hasthe added benefit of eliminating the engine maintenance onthe Warrior. Similarly in regions of the world where we needto operate in high altitude or in high ambient temperatures,the Warrior 1400XE can be powered as part of a machinetrain from a single gen-set, which can be oversized to handleany de-rating caused by the operating environment.There are many other scenarios where this machine will
be seen as the right solution. For example, the Warrior1400XE is more suited to running indoors than a conven-tional diesel-hydraulic machine and the extremely low noiselevels also will be advantageous in many circumstances,according to the manufacturer.
Powerscreen Premiertrak 600 Jaw CrusherThe Powerscreen Premiertrak 600 is a high performance
primary jaw crushing plant, which is easy to set up, versatileand engineered for quarrying, demolition and mining appli-cations that require high production capabilities. At the heart
of the Premiertrak 600, is a 47 by 32 in. (119 by 81 cm) mod-ern jaw chamber incorporating a robust construction withmany user-friendly features, such as a fully hydraulic CSSrange of 3 to 8 in. (7.6 to 20 cm) and a reversing system toclear blockages quickly for increased uptime. The aggressivestroke and high inertia flywheels ensure high productionrates and excellent reduction ratios.The machine can produce up to 661 tons (600 t) per hour
and has a proven track record of excellent performance bycrushing some of the hardest rock in the world with ease inFinland, Sweden and Germany, according to the manufac-turer. Underlining the ease of set-up Ed O’Donohue, an opera-
tor in Ireland said, “When the machine first arrived, we werehugely impressed with the modern design and robust con-struction. For a machine in that class range at more than 70tonnes, we expected it to be quite complicated to set up andget operational, but in fact the opposite was true. Themachine was crushing within minutes of being tracked offthe transport truck.”The diesel-hydraulic and diesel-electric variants of the
Premiertrak 600 have been designed and constructed todeliver maximum production and performance withincreased uptime and low running costs. The high capacityjaw is fed by a vibrating grizzly feeder with variable speedcontrol and a large grizzly area to maximise removal of finematerial enabling maximum wear life of jaw plates withinthe crusher chamber. The bypass chute also is fitted withwear-resistant liners as standard, and incorporates anadjustable five-position deflector plate to divert material toeither the product or side conveyors. For more information, visit www.powerscreen.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
The Warrior 1400XE has been designed to meet the needs of customers for whom electricity is a preferred power source and opens up the possibility to run the machineindoors.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2016 • Page 35
Lokotrack® ST2.8™ Lokotrack ST2.8 makes the scalping of sticky recycling material look easy. The high-energy ST2.8 features an aggressive eccentric throw for screening tough feed materials like top soil, demolition waste, and river gravel. In multistage Lokotrack crushing processes, � nes removal is easy with a two-way split option. Contact your local Metso distributor today for more details.
www.metso.com/lokotrack
The solution for tough
scalping jobs
WESTATEwww.westate.com3809 Hwy. 312
Billings, MT 59105800-999-6676
Fax: 406-373-6553
CRISP INDUSTRIES, INC.www.crispindustries.com
323 Energy WayBridgeport, TX 76426
940-683-4070800-315-0871
Fax: 940-683-2181
Seguin, Texas 78155830-372-1110
CUTTING EDGE SUPPLY234 East O StreetColton, CA 92324
800-949-9014Fax: 909-825-4569
Phoenix, AZ800-729-1473
N. Las Vegas, NV702-649-1303
COMPASS EQUIPMENTwww.compassequip.com4688 Pacific Heights Rd.
Oroville, CA 95695530-533-7284530-533-8610
Fax: 530-533-7657
WHEELER CRUSHING SYSTEMSwww.wheelercat.com/crushing
451 North Lund HighwayCedar City, UT 84720
5300 West Wheeler WayHurricane, UT 84737
239 North 1800 WestLindon, UT 84042
95 North 1000 WestLogan, UT 84321
1831 S. Highway 191Moab, UT 84532
2366 South 1900 WestOgden, UT 84401
1345 South State StreetSalina, UT 84654
1345 South 1500 EastVernal, UT 84078
4901 West 2100 SouthSalt Lake City, UT 84120
4428 E Trent Ave.Spokane, WA 99212
800-541-0754509-535-1654
Fax: 509-534-6741
22431 83rd Ave SKent, WA 98032800-669-2425253-872-3500
Fax: 253-872-3519
19444 Ivan Street SWRochester, WA 98579
800-304-4421360-273-4284
Fax: 360-273-4290
5241 N.E. 82nd AvePortland, OR 97220
800-950-7779971-222-1710
Fax: 503-255-1553
4610 Cloudburst WayEugene, OR 97402
800-826-9811541-688-7321
Fax: 541-688-2241
1257 West AmityBoise, ID 83705800-221-5211208-336-8570
Fax: 208-336-8616
2735C Tucker CourtJerome, ID 83338
800-221-5211208-324-4522
Fax: 208-324-8034
2666 Garrett WayPocatello, ID 83201
800-829-4450208-233-5345
Fax: 208-235-9658
MODERN MACHINERYwww.modernmachinery.com
Page 36 • March 6, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
www.petersoncat.comNorthern California
888-738-3776Oregon/Southern Washington
800-452-7676
Chico, CA • Redding, CAFortuna, CA • Willows, CA
Willits, CA • Santa Rosa, CASan Martin, CA
San Leandro, CAEugene, OR • North Bend, OR
Klamath Falls, ORRedmond, OR • Medford, ORAlbany, OR • Portland, ORSalem, OR • The Dalles, OR
Longview, WA
www.wagnerequipment.comAlbuquerque, NM
505-345-8411Aurora, CO
303-739-3000Burlington, CO719-346-7880
Colorado Springs, CO719-635-1669Durango, CO
970-259-2001El Paso, TX
915-821-7651Farmington, NM505-327-5331
Grand Junction, CO970-242-2834Hayden, CO
970-276-3781Hobbs, NM
575-393-2148Pueblo, CO
719-544-4433Windsor, CO
970-278-1750
www.tractorandequipment.comBillings, MT
406-656-0202Billings-Southgate, MT
406-245-4426Bozeman, MT406-585-5800Great Falls, MT406-761-7900Helena, MT
406-442-2990Williston, ND701-572-8377Worland, WY307-347-4747
www.ncmachinery.comSeattle, WA
425-251-5800Chehalis, WA360-748-8845
Fife, WA253-896-0878Monroe, WA
360-805-6000Mount Vernon, WA
360-424-4292Port Angeles, WA
360-452-9222Wenatchee, WA509-886-5561Yakima, WA
509-248-2371Anchorage, AK907-786-7500
Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251Juneau, AK
907-789-0181Prudhoe Bay, AK907-659-9600Wasilla, AK
907-352-3400
www.quinncompany.comBakersfield, CA661-393-5800Corcoran, CA559-992-2193Firebaugh, CA559-659-3444
Foothill Ranch, CA949-768-1777
Fresno, CA559-896-4040Lancaster, CA661-942-1177
Los Angeles, CA562-463-4000Oxnard, CA
805-485-2171Salinas, CA
831-758-8461Santa Maria, CA805-925-8611Sylmar, CA
818-767-7171
RD Olson Customizes Rock Crushing,Screening, Recycling Equipment
This RDO 6x16 track screener is about 70 percent complete. It will be complete shortly and be ready to be put to work.
This assembly area is used for final application of finishingtouches. Soon, these machines will head out the door.
RD Olson manufacturers many of the partsand components used in its equipment, likethese large sand screws.
OLSON from page 33
The new portable hopper feederfrom KPI-JCI and Astec MobileScreens is now offered as a highway-portable rental tool designed to intro-duce material into a plant and eliminatesurges in quarry systems.Built with scissors action grizzly fin-
gers designed to minimize wedging ofmaterials, the portable hopper feeder isideal for loader feeding material toscreening, crushing and washingplants, according to Jodi Heirigs, prod-uct manager of KPI-JCI and AstecMobile Screens. Material feed rate canbe controlled with the use of a dis-charge gate and/or variable frequencydrive (VFD).“Our portable hopper feeder is built
with a flat grizzly instead of a standardsloped grizzly, making it highwayportable and ideal for rental fleets,”Heirigs said. “Producers who seek tocontrol their material feed rate andmaintain a consistent material process-ing speed throughout their operationwill benefit from this equipment.”The portable hopper feeder features a
20-cu.-yd. (15.3 cu m) hopper and isavailable with a wireless remote tooperate the hydraulic grizzly dump. An
electrical control panel includes a starterfor the electric/hydraulic power packand VFD for the feeder. The hopperfeeder is available in 36 or 42 in. (91 or106 cm) belt widths and an extended 18ft. (5.5 m) length that allows producers
to feed a radial stacker.For more information, visit kpijci.com.(This story also can be found on
Construction Equipment Guide’s Web
site at www.constructionequipment-
guide.com.)
Portable Hopper Eliminates Surges
Built with scissors action grizzly fingers designed to minimize wedging ofmaterials, the portable hopper feeder is ideal for loader feeding materi-al to screening, crushing and washing plants.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2016 • Page 37
© 2014 Caterpillar • All Rights Reserved • Printed in USA, their resp T FOR IT T, their respective logos, “Caterpillar YTERPILLAR, BUIL LT FOR IT, CA ATERPILLAR, BUILTT, CACA
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Cat.com
© 2014 Caterpillar • All Rights Reserved • Printed in USA,” the “Power Edge”trade dress as well as ellow, their respective logos, “Caterpillar Y
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
www.holtcat.com800-275-4658
Houston, TX713-460-2000Beaumont, TX409-892-8412
Bryan, TX979-775-7368
Bryan, TX979-775-0639
Channelview, TX281-452-7368
Conroe, TX936-756-1110El Campo, TX979-543-3389
Freeport, TX979-233-7368Houston, TX
713-462-9993Houston, TX
713-228-7368LaMarque, TX409-935-7000
Lufkin, TX936-639-5551
Lufkin, TX936-632-6775Nederland, TX409-722-7368
www.mustangcat.com
Riverside, CA951-686-4560
Indio, CA760-342-1597
Murrieta, CA951-696-1063Hesperia, CA
760-947-0967
www.johnson-machinery.com
Austin, TX512-282-2011Bridgeport, TX940-683-6297Cleburne, TX
817-202-1000Corpus Christi, TX
361-852-2200Dallas North, TX214-342-6700Eagle Pass, TX930-715-4585
Edinburg North, TX956-292-7900Fort Worth, TX817-246-6651
Irving, TX972-721-2000
Kilgore, TX903-986-5500
Laredo, TX956-722-0075Lewisville, TX214-483-2500
Little Elm, TX214-585-4000Longview, TX903-758-6175Pflugerville, TX512-252-9696
San Antonio, TX210-648-1111
Sonora, TX325-387-5303
Sulphur Springs,TX
903-439-3060Texarkana, TX903-832-7535
Tyler, TX903-595-6424
Victoria, TX361-573-2438
Waco, TX254-662-4911Weslaco, TX
956-968-2161
Page 38 • March 6, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2016 • Page 39
800-883-9284 | POWER-EQUIP.COM
DENVER, CO303-288-6801
ALBUQUERQUE, NM505-344-9466
CASPER, WY307-577-9700
SALT LAKE CITY, UT801-280-4105
GRAND JUNCTION, CO970-243-0722
GREELEY, CO970-669-6209
COLORADO SPRINGS, CO719-392-1155
POWERFUL SOLUTIONSFOR THE CRUSHING AND SCREENING INDUSTRY
Power Equipment Company and Screen Machine Industrieshave teamed up to provide the Rocky Mountain region with the best portable
crushing and screening solutions in the industry.
Screen Machine Industries is the premier American manufacturer of portable jaw,impact & cone crushers, screening plants, trommels and conveyors. Over a century's
worth of combined design and engineering expertise go into every new product.
Power Equipment Company is the authorized dealer for Screen Machine Industriesin Colorado, New Mexico, Wyoming, and Utah.
© 2015 Power Equipment Company
Page 40 • March 6, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Because the right skills increase safety and productivity,Atlas Copco is offering new ways to access training on itsmining equipment. The classes can be done on site, in class-rooms and even online.Distributors of Atlas Copco equipment and operators
themselves can browse and request training courses and classsessions on Atlas Copco’s free mobile app, Training365,available from the Apple or Google Play stores. Additionally,requests and questions may be emailed [email protected] Thompson, national service operations manager of
Atlas Copco mining equipment said, “We’ve seen how train-ing can make mines more productive and workers safer. Ourclasses range from how to get the most out of our RigControl System to simulator training so operators can prac-tice in a safe, risk-free environment that’s just like the realthing.” Simulator training is offered for surface and underground
rigs.Two fixed-date classes are offered each year at the
Garland, Texas, factory for Atlas Copco Drilling Solutions.This new format of requesting classes gives more opportuni-ty for drilling operations to increase efficiency.For more information, call 800/732-6762 or visit
www.atlascopco.us.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
New Ways to Train,Improve Skill With Atlas Copco App
Distributors of Atlas Copco equipment and operatorsthemselves can browse and request training coursesand class sessions on Atlas Copco’s free mobile app,Training365, available from the Apple or Google Playstores.
Metso’s HRC 3000 High-Pressure Grinding Roll Provides Energy-Efficient SolutionEnergy efficiency is the key to suc-
cess at modern mines and quarries. Themost potential for energy and cost sav-ings can be realized in the comminu-tion process, where ore is ground andcrushed into smaller particles. With theHRC 3000, one of the largest, fully-operating high-pressure grinding rolls(HPGR) in the world, Metso providesan energy-efficient solution with arange of features, aimed at getting morevalue from every ton of ore, accordingto the manufacturer.The HRC 3000 was the result of a
close collaboration between Metso andFreeport-McMoRan Inc. The goal wasto develop a highly efficient HPGRcrushing circuit for the newly con-structed Metcalf concentrator atFreeport-McMoRan’s copper mine inMorenci, Ariz. In approximately fouryears, the team went from a designconcept to the largest fully operatingHPGR in the world.
Demonstrated EfficiencyThe HRC 3000 started operating at
Freeport-McMoRan’s copper mine inMay 2014. The installed unit is allowsfor fewer lines of equipment, whichreduces the amount of ancillary equip-ment. To date, the unit has operated formore than 8,400 hours and has crushedmore than 34 million tons of porphyrycopper ore. Metso’s solution has provided the
Morenci mine with several benefits,including an estimated 13.5 percentincrease in energy efficiency over tradi-tional HPGRs based on pilot scale test-ing, according to the manufacturer.The HRC 3000 is the first full-scale
HPGR to incorporate revolutionarydesign features like the flanged tiredesign and the arch-frame. Dependingon the application, the total capacity ofthis HPGR can exceed over 5,400 tons(4,899 t) per hour of ore.
“In addition to boosting the equip-ment’s energy efficiency, our main goalwas to innovate and to push the exist-ing boundaries in order to ensure avaluable solution to our customer. ThisHPGR is not only a larger scale versionof what was currently available to themarket, but also applies technologicalsolutions to overcome some inherentconcerns typically associated with tra-ditional HPGRs, including skewingand edge effect,” said Victoria Herman,
product manager, HRC high-pressuregrinding rolls.For more information, visit
metso.com.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The HRC 3000 was the result of a close collaboration between Metso andFreeport-McMoRan Inc. The goal was to develop a highly efficient HPGRcrushing circuit for the newly constructed Metcalf concentrator atFreeport-McMoRan's copper mine in Morenci, Ariz.
The HRC 3000 started operating at Freeport-McMoRan’s copper mine inMay 2014. The installed unit is the largest of its kind in the world, allow-ing for fewer lines of equipment, which reduces the amount of ancillaryequipment.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2016 • Page 41
CRUSHING
MATERIAL HANDLING
SCREENING TRACKS
WASHING & CLASSIFYING
Loading/UnloadingConstruction Infrastructure EnergyAggregate MiningRecycle www.kpijci.com
The complete source for equipment in the aggregate, construction and recycling industries.
www.modernmachinery.com
www.powermotivecorp.com
GNHISURC
EERCS
GNINEE
SCKART
y
REATMDLNAH
LAIRGNIDL &GNHISAWWA
GNIYFISSALC
C
Colorado Springs CO 80906 Dura
p p
ango CO 81301
Crush. Classify. Profit.
CRUSHING PLANTS
Closed-circuit PLANTS
SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.
IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.
For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.
w w w . i r o c k c r u s h e r s . c o m
Page 42 • March 6, 2016 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Screen Machine Hires Beasleyas National Sales Director
Screen Machine Industries announced the addition of Jody Beasley as nationalsales director of the United States and Canada. Beasley comes to SMI with 18 years of industry experience related to the Bobcat,
Doosan and Ditch Witch product lines. His roles have included retail and wholesalecredit management, financial sales, dealership management, district sales manage-ment, new dealer recruitment, and channel enhancement positions. Beasley bringskey leadership, experience, insight, and collaborative entrepreneurship with him,according to the company.For more information, visit www.screenmachine.com.
MB America will be attending theNational Demolition Association (NDA) forthe fourth year. This year, the company willfeature a display of crushed concrete, asphaltand rocks produced by MB’s BF90 crusherattachment.The crushed material will give attendees a
visual of the various sizes the MB crushercan crush down to. The company’s BF prod-uct line — and its other crushing attach-ments — has an adjustable output and usesthe auxiliary hydraulic system on excava-tors, skid steers and backhoes.“Imagine what you can do with your
materials if you could crush them yourself.You will have that flexibility when you seethe materials the MB crusher can produce,”said Max Ravazzolo, C.E.O. of MBAmerica. MB’s crushing attachments allow con-
tractors to crush materials — which other-wise would be considered waste — to reuseon the job site. Its crushing attachments have
the ability to crush railway sleepers, hollowcore walls, reinforced and non-reinforcedconcrete, natural stone and asphalt intoreusable aggregate materials for base or fill. Contractors will be able to reuse materials
immediately at the job site and provide agreener option in recycling waste materials.By reusing the materials, contractors andbusinesses can save time and money inreducing waste and trucking costs.MB’s product line includes crushing and
screening attachments, 360 degree grapples,and rotary head drum cutters for a widescope of work — which includes demolitionand excavation, road work, quarries, mining,pipeline work and environmental reclama-tion projects. For information, call 855/622-7874 or
visit www.mbamerica.com.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
Crushing Materials…
MB America to FeatureBF90 Attachment at NDA
MB America’s Live Demo Draws Crowd at World of ConcreteIn the Silver Lot of the Las Vegas
Convention Center, an excavator and a skidloader picked up large concrete chunks witha jaw crusher attachment — signaling topassersby that the crushing action was aboutto begin. MB America’s crusher attachmentssmash another round of concrete debris andprecast concrete at World of Concrete 2016.Last year, MB America crushed the World
of Concrete 2015 event with its live crushingdemonstrations. This year, at World ofConcrete 2016, the company crushed foranother record crowd of attendees.“You have to see the MB crusher crush in
person. There’s no other way to describehow it works without seeing it for yourself,”said Max Ravazzolo, C.E.O. of MBAmerica. “Once you know that the machinecan crush through concrete and spit out therebar, you will be so impressed that you’llstart to wonder what areas of your job youcan start crushing, where you can start sav-ing some time, and when you can startadding more money back into your pock-ets.”The company occupied an outside booth
in the Silver Lot at the Las VegasConvention Center, where more than halfthe booth was dedicated to the live crushingdemonstrations. An excavator and a skid
loader were equipped with the crushingattachments, showing the wide range ofproducts the company offers. The excavator-mounted attachment, the BF90, was crush-ing down to a 3-in. minus, while the skid-loader-mounted attachment, the MB-L120,was crushing down to a 1-in. minus.The company also showed attendees how
the crushing attachments are able to crushmaterials with rebar. Using an iron separator,
the excavator-mounted attachment wasequipped to remove rebar from the pile ofcrushed concrete and move rebar to the sideof the work area — without the operatorhaving to leave the cab of the excavator.At the non-demo area, MB America fea-
tured two more excavator-mounted crusherattachments (BF70 and BF120), the largestskid-loader-mounted crusher attachment(MB-L200), and the latest skid-loader-
mounted screening attachment (MB-LS140).MB’s product line has expanded to
include several new attachments for the con-struction and demolition industry. Now, MBoffers screening attachments for skid loadersand backhoe loaders, 360 degree grapples,and rotary head drum cutters for a widescope of work — which includes demolitionand excavation, road work, quarries, mining,pipeline work and environmental reclama-tion projects. MB products are available forany excavator, skid loader or backhoeloader, regardless of brand or size.MB’s attachments use the auxiliary
hydraulic system of the excavators, skidsteers and backhoes, allowing contractors towork in tight areas, difficult access locations,steep slopes and urban areas. Contractorswill be able to reuse materials immediatelyat the job site and provide a greener option inrecycling waste materials. By reusing thematerials, contractors and businesses cansave time and money in reducing waste andtrucking costs.For more information, call 855/622-7874
or visit www.mbamerica.com.(This story also can be found on
Construction Equipment Guide’s Web site at
www.constructionequipmentguide.com.)
The company occupied an outside booth in the Silver Lot at the Las VegasConvention Center, where more than half the booth was dedicated to the live crush-ing demonstrations.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • March 6, 2016 • Page 43
Maximum production
capacity Lokotrack® LT106™The new and improved Lokotrack LT106 jaw plant is taking production capacity to a whole new level. New features, such as a radial side conveyor, high inertia � ywheels, and an IC700 automation system that utilizes an ultrasonic material level sensor, o� er the best capacity and cost e� ciency in its size class. For more information, contact your local Metso distributor today.
www.metso.com/lokotrack
4428 E Trent Ave.Spokane, WA 99212
800-541-0754
509-535-1654
Fax: 509-534-6741
22431 83rd Ave SKent, WA 98032800-669-2425
253-872-3500
Fax: 253-872-3519
19444 Ivan Street SWRochester, WA 98579
800-304-4421
360-273-4284
Fax: 360-273-4290
5241 N.E. 82nd AvePortland, OR 97220
800-950-7779
971-222-1710
Fax: 503-255-1553
4610 Cloudburst WayEugene, OR 97402
800-826-9811
541-688-7321
Fax: 541-688-2241
1257 West AmityBoise, ID 83705800-221-5211
208-336-8570
Fax: 208-336-8616
2735C Tucker CourtJerome, ID 83338
800-221-5211
208-324-4522
Fax: 208-324-8034
2666 Garrett WayPocatello, ID 83201
800-829-4450
208-233-5345
Fax: 208-235-9658
CUTTING EDGE SUPPLY234 East O StreetColton, CA 92324
800-949-9014
Fax: 909-825-4569
Phoenix, AZ800-729-1473
N. Las Vegas, NV702-649-1303
CRISP INDUSTRIES, INC.www.crispindustries.com
323 Energy WayBridgeport, TX 76426
940-683-4070
800-315-0871
Fax: 940-683-2181
Seguin, Texas 78155830-372-1110
451 North Lund HighwayCedar City, UT 84720
5300 West Wheeler WayHurricane, UT 84737
239 North 1800 WestLindon, UT 84042
95 North 1000 WestLogan, UT 84321
1831 S. Highway 191Moab, UT 84532
2366 South 1900 WestOgden, UT 84401
1345 South State StreetSalina, UT 84654
1345 South 1500 EastVernal, UT 84078
4901 West 2100 SouthSalt Lake City, UT 84120
Burlington, CO719-346-7880
Colorado Springs, CO719-390-7316
Durango, CO970-259-2001
Grand Junction, CO970-242-2834
Hayden, CO970-276-3781
Pueblo, CO 719-544-4433
Windsor, CO970-278-1750
Yuma, CO970-848-2911
Albuquerque, NM505-345-8411
Farmington, NM505-327-5331
Hobbs, NM575-393-2148
El Paso, TX915-821-7651
MODERN MACHINERYwww.modernmachinery.com
WHEELER CRUSHING SYSTEMSwww.wheelercat.com/crushing
801-679-4721
WAGNER EQUIPMENT CO.www.wagnerequipment.com
18000 Smith Rd.Aurora, CO 80011
303-739-3000
Fax: 303-739-3191
COMPASS EQUIPMENTwww.compassequip.com4688 Pacific Heights Rd.Oroville, CA 95695
530-533-7284
530-533-8610
Fax: 530-533-7657
WESTATEwww.westate.com3809 Hwy. 312
Billings, MT 59105800-999-6676
Fax: 406-373-6553
Page 44 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
eXCAVAtors
Hydraulic excavators
2014 Komatsu PC290 LC-10,
Cab A/C, 31.5'' Tracks, 10' Arm,
Aux Hyd., Rear camera,
Komtrax, 1200 hrs ..$249,500.
2012 Komatsu PC240 LC-10,
Cab A/C, 31.5'' shoes,
Komtrax, 2200 hrs ..$186,500.
road Builders Machinery &
supply Co., Inc.
866-485-7180
2015 Doosan DX225LC-3,
EROPS, A/C, 42'' bucket, Aux
Hyd, 32'' Pads, 6 Cyl.,
10 hrs ......................$139,500.
Hendrix Machinery, LLC
1-936-327-5430
Mini excavators
'12 Komatsu PC35Mr-3, Cab
A/C, Aux Hyd, Blade,
Roadliners, Komtrax, 700
hours ..........................$CALL.
'02 Komatsu PC95r-2,
Cab/Heat, 20'' Tracks, Aux Hyd,
Blade, 1900 hours ....$69,500.
'00 Komatsu PC30Mr-1,
Cab/AC, Aux Hyd, Blade,
Roadliners, 1200 hours ..........
..................................$29,500.
road Builders Machinery
& supply Co., Inc.
866-485-7180
LoADers
Crawler Loaders
2012 John Deere 450J Lt,
OROPS, 6 way blade, 16''
pads, 8ft wide, 2,714 hrs ........
..................................$57,500.
Hendrix Machinery, LLC
1-936-327-5430
skid steer Loaders
2013 Case sV185, OROPS,
64'' Bucket, Aux Hyd., Quick
Coupler, 4 Cyl., 214 hrs ..........
..................................$29,500.
Hendrix Machinery, LLC
1-936-327-5430
DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?
Construction Equipment Guide is THE Place to List It!
2 InsertIons In one regIon (northeast, southeast, Midwest, West)30 words or less$1.16 additional per word over 30For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.
ONLY
$35Call 800-523-2200or go online to place your ad
www.constructionequipmentguide.com/pages/customer/classifieds.asp
and place your ad through our websiteand we will contact you!
®
CLASSIFIEDSWould you like
YOURCOMPANYfeatured in ConstructionEquipment
Guide?If so, please contact us:
470Maryland Drive,
FortWashington,
PA 19034
Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16.For just an additional $20 your ad can be posted on our online searchable
database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910Toll Free 1-800/523-2200
The Easy Way To Advertise Your Equipment
Run In Two Consecutive IssuesBlack & White $105 • Color $155
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum
20 word description, plus contact and phone number.
• Either email your copy & photo to:[email protected],
or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $105 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
For more information, call Construction Equipment Guide today at
800/523-2200
MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.
Call McLaren 888-492-4230 4-5 DH
MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning;less ground damage; fully rebuildable; interchangeableshoe types.
Call McLaren 888-492-4230 4-5 DH
MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regularpneumatic tires; rims included; same day shipping; various tire sizes available.
Call McLaren 888-492-4230 4-5 DH
2015 1500 AJ JLG-SKY Power, Only 164 Hrs, Get more reach and height for the money. Retractablewheel base for easy transport. A very clean machine.........................................Priced to Move at $250,000
Call Johnny Rohrbough 402-980-0468 5-6 AP
Serving the Construction Industry Since 1989Trench Shoring - Confined Space - Pipe Plugs
Rentals - Sales - Service800-828-8505 4-5 PK
Sentry Tires - Skid Steer and Wheel Loader Tiresat Volume Buyers Prices!
Call Mark Sladoje for Sizes & Pricing614-395-4064 4-5 EB
“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-Quality SUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states ............................................................Call
Summit Supply LLCEast, West & South Warehouses
888-888-1248 • [email protected] 5-6 TM
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 45
WANTED: ROLLED OVER CHIPPERS /ANY EQUIPMENTLOOKING FOR WRECKED, ROLLEDOVER, OR DAMAGED EQUIPMENT.CHIPPERS, STUMP GRINDERS, SKIDSTEERS, ETCCONTACT: TIMPHONE: 724-640-4396EMAIL: [email protected]: 724-887-4899––––––––––––––––––––––––––––––––WANTED: WANT BULLDOZER CASE1650KLGPWANT TO BUY FROM USER USA ONLYBULLDOZER CASE 1650KLGP RUN ORBURN 2005AT 2009CONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 OR 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED: WE BUY EQUIPMENT MANU-ALSWE ARE LOOKING TO PURCHASE NEWOR USED SERVICE, SHOP, PARTS,OPERATOR’S OR OTHER MANUALSFOR EQUIPMENT OF ALL SORTS (NOTINCLUDED TRUCKS AND VEHICLES).WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED: HFO GENERATOR/WARTSILAOR MAN GENERATORHFO = 1.5 MW CAPACITY, 50 TO 60 HZ,VOLTAGE 400/450, PHASE 3. WARTSILA= 2007 OR ABOVE, NET POWER 4MW(PREFERRED 2 GENSET), 50 HZ WITHCOMPLETE AUXILIARIES, LESS THAN50,000 RUNNING HOURS. IF YOU HAVEANY, PLEASE SEND FULL DETAILS,PICTURES & PRICE.CONTACT: VICTOR LEBRONPHONE: 864-574-0404EMAIL: [email protected]: 864-576-7204––––––––––––––––––––––––––––––––WANTED: JOHN DEERE 350CHOOD/ENGINE COVERCONTACT: BRUCEEMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED: CAT 988H HIGH LIFTLOOKING FOR A CAT 988H HIGH LIFT<10,000 HRS. PLEASE SEND PHOTOS,BEST WHOLESALE PRICE AND LOCA-TION.CONTACT: DAVID MOOREEMAIL: [email protected]––––––––––––––––––––––––––––––––
WANTED: USED 50 TON HYDRAULICTRUCK CRANESEARCHING FOR 1990 OR ABOVEUSED 50 TON HYDRAULIC TRUCKCRANE. UNADVERTISED -SEEN THEM. IWILL TAKE OVERSEAS SO NEED NEARPORT IF POSSIBLE. THANKS. PIC-TURES PLEASE.CONTACT: BOBPHONE: 919-896-4782EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED: TRANSMISSIONTRANSMISSION FOR JOHN DEERE610B BACKHOE/ LOADERCONTACT: MIKE PADGETT, SRPHONE & FAX: 803-603-4651)EMAIL: [email protected]––––––––––––––––––––––––––––––––BRAZZOLI PIPO WASHING 600 KG & N-2615 HFO GENERATOR. WASHINGCAPACITY 600 KG. GENERATOR 1.5 MWCAPACITY, 50-60 HZ, VOLTAGE 400/450,PHASE 3. IF YOU HAVE EITHER PLEASESEND US FULL DETAILS, PICTURES &PRICE.CONTACT: VICTOR LEBRONPHONE: 864-574-0404EMAIL: [email protected]: 864-576-7204––––––––––––––––––––––––––––––––CAT WHEEL LOADERS, NEED RUNNINGOR NON-RUNNING CAT WHEEL LOAD-ERS 910, 920, 930, 936 & 936E. CALLRIZ @ 832-528-0786 OR [email protected] NEEDRUNNING OR NON-RUNNING CATWHEEL LOADERS 950, 950B, 950E,950F/F-II, 966C/E & 966F/F-II. NEED RUN-NING OR NON-RUNNING CAT WHEELLOADERS 970F, 980C, 980F, 988B &972GCONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D11T WITH RIP-PER UNDER 6000 HOURS EPANEEDED BULLDOZER D11T WITH RIP-PER UNDER 6000 HOURS «EPA« AFTERI NEED EXCAVATOR EX-1200-6 UNDER3000 HOURS WITH CE ONLYCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 631E..OR 651E, LOOKING FOR CAT631E..OR 651E..WEST COAST LOCA-TIONCONTACT: DALEPHONE: 360-551-9778EMAIL: [email protected]––––––––––––––––––––––––––––––––LATE MODEL LOW HOURED ASPHALTPAVER, LOW HOURED PAVER WITH 8'-16' OR 10'-20' SCREED.CONTACT: ROBERTPHONE: 214-801-3100EMAIL: [email protected]––––––––––––––––––––––––––––––––
WANT TO BUY BULLDOZER KOMATSU51PX-22 2012 AND UPWANT TO BUY BULLDOZER KOMASTU51PX -22 ENC CAB UNDER 1000 HOURS2012 AND UP LOCATED USA USERONLY NOT ADVERTISED «CONTRAC-TOR ONLY NO HACKER« ORREPOSESS BANKCONTACT: JEAN MAURICE BOUTINPH: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––CONCRETE CRUSHER/PULVERIZERFOR EXCAVATOR | MECHANICAL CONCRETE CRUSHER FOR KOMATSUPC 200 70MM PINSCONTACT: JOEPHONE: 724-944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED RUNNING OR NON-RUNNING CATWHEEL LOADERS 910, 920, 930, 936 &936E. NEED RUNNING OR NON-RUN-NING CAT WHEEL LOADERS 950, 950B,950E, 950F/F-II, 966C/E & 966F/F-II NEEDRUNNING OR NON-RUNNING CATWHEEL LOADERS 970F, 980C, 980F,988B & 972G.CONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––GENERATOR | WE ARE LOOKING FORA GENERATOR, CHP, 1X1MW, 1X500KW,HZ:50, FUEL TYPE: GAS, OUTPUTVOLTAGE: 400 VOLTS. IF YOU HAVEANY, PLEASE SEND FULL DETAILS,PICTURES & PRICE.CONTACT: VICTOR LEBRONPHONE: 864-574-0404FAX: 864-576-7204EMAIL: [email protected]––––––––––––––––––––––––––––––––TURBINES WITH ALTERNATORS | PLUSALL ELECTRICAL CONTROL PANELSAUXILIARIES LIKE CONDENSERS, OILAND LUBRICATION SYSTEMS, EJECTORS, ETC. A COMPLETE STEAMTURBINE GENERATOR SET FOR 11,000VOLTS, 50 HZ, 18MW TO 20MW CONDENSING TURBINES 67KG/CM2 TO90 KG/CM2 IN LET PRESSURE. IF YOUHAVE ANY, PLEASE SEND FULLDETAILS, PICTURES & PRICE.CONTACT: VICTOR LEBRONPHONE: 864-574-0404FAX: 864-576-7204EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU PC200LC-5 | KOMATSUENGINE CLOSE TO THE SOUTH ORSOUTH EAST RUNNING OR NON RUNNING 2-3 UNITSCONTACT: JASON SPENCEEMAIL: [email protected]––––––––––––––––––––––––––––––––
KOMATSU D39PX | KOMATSU D37, D39,D51, D61, D65 ALL PX DOZERS UNDER5000CONTACT: JASON SPENCEEMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D 8T D9T D10T D11T INEED FROM USER | WANT TO BUYFROM «USER USA ONLY« BULLDOZERWITH RIPPER ONLY BULLDOZER D8ATD11 1975 AT 2015 ONLY USER NOTADVERTISED CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 988H | WE WANT TO BUY CAT 988HWITH BLOCK HANDLERCONTACT: JOHNSON WILLIAMSPHONE: 707 736 6806EMAIL: [email protected]–––––––––––––––––––––––––––––––– CX160D EXCAVATORS | 4 UNITCONTACT: EMANUEL GARCIAPHONE: 00244925197944EMAIL:[email protected]––––––––––––––––––––––––––––––––WARTSILA OR MAN GENERATORS 5MWTO 12MW | NEED (2) GENERATORS: (1)WITH CAPACITY 10 TO 12MW, (1) WITHCAPACITY 5 TO 6MW. BRAND" WARTSI-LA OR MAN FUEL: DUEL (HFO, DIESEL)PREFERRED VOLTAGE: 11KV PREFERRED AUXILIARY LOAD: HRSGBASE. PLEASE SEND FULL DETAILS,PICTURES & PRICE.CONTACT: VICTOR LEBRONPHONE: 864-574-0404FAX: 864-576-7204EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: CATERPILLAR WHEELLOADERS: 980GI, 980FI, 980C (1986 &
UP), 972H, 972G, 970F, 966H, 966G,966FII, 966FI, 966F, 966E, 966D, 966C,950F, 950E, 950B, 950A (1978 & UP), 936,930, 920, 910.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]–––––––––––––––––––––––––––––––– WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: TCM WHEEL LOAD-ERS: 830, 820 & 810.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: KOMATSU WHEELLOADERS: WA 100-1, 70, 40 & 30.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: EXCAVATORS: CAT225B, BLC OR DLC. CAT 235C OR D.SAMSUNG 280LC. DAEWOO 290, 300,420, 470 OR 500. HITACHI EX-60 OR EX-120.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: MOTOR GRADERS:CATERPILLAR 140H, 120H, 140G, 14G,14H OR 12G.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST:CATERPILLAR DUMPER 769C OR 769D.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: DOZERS: CAT D9L,D9N, D9R, D10N. KOMATSU D-355 OR D-155.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE MACHINESFROM THIS LIST: ROLLERS: INGER-SOLL RAND COMPACTOR SD100D ORSD150D. BOMAG 213, DYNPAC 251D,301D OR 421 (6-8.5 TONS), HAMM 1997& UP (11-12 TONS).CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––
WE ARE LOOKING FOR ANY GOODRUNNING OR SALVAGE CATERPILLARENGINES: 3116, 3176, 3196, 3204 & 3304(DI & PC), 3306 (DI ONLY), 3406B & CSERIES ONLY, 3408 DI ONLY, 3412 (DI & PC), C11 & C13.CONTACT: ADEL LOKAPHONE: 714-494-4488 OR 717-666-1117EMAIL: [email protected]––––––––––––––––––––––––––––––––JOHN DEERE 744J WHEEL LOADERLOW HOURS GOOD CONDITIONCONTACT: JOEPHONE: 724-944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––SOIL COMPACTOR | I NEED SOIL COMPACTOR AND MOTOR GRADERCONTACT: SALIM K APHONE: 9745062657,9446465929EMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADER 644B | JOHN DEEREWHEEL LOADER 1975 TO 1985CONTACT: DAVIDPHONE: 6417407315EMAIL:[email protected]––––––––––––––––––––––––––––––––BUCKET DRILLING RIG | RIG TO DRILLDRY WELLS 30 DEEP; IDEALY 42" TO60" DIAMETER. THANK YOU.CONTACT: JOHN GORSKYPHONE: 5596515820FAX: 5596515830EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED: CAT 938 OR 950 OR A JOHNDEERE 644K UNDER 2500 HRS. PRE-FER COUPLER BUCKET AND FORKSCONTACT: GREG MARTINPHONE: 614-562-4830EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED: (2) DEERE 300D II HAULTRUCKS | LOOKING TO PURCHASE 2 -LOW HOUR DEERE 300D II HAULTRUCKS.CONTACT: GLENN RUSSELLPHONE: 3603147413FAX: 3607273222EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT WHEEL LOADER | WE ARE INTER-ESTED IN CATERPILLAR WHEEL LOAD-ERS AND OTHER EQUIPMENT .CONTACT: GEORGE SAEIDPHONE: 717-666-1117EMAIL:[email protected]––––––––––––––––––––––––––––––––23 TON REAR MOUNT BOOM TRUCK |23 TON NATIONAL CRANE OR EQUAL.(REAR-MOUNT ONLY) CAB IF POSSI-BLE. UNADVERTISED. EAST COAST IFPOSSIBLE.CONTACT: BOBPHONE: 919-896-4782EMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:
www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted
Page 46 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�
• Providence, RIWed., March 16, 2016For: Receivership Auction – One OwnerConstruction Sale
• New Martinsville, WVFri., March 18, 2016For: Major Pipeline Job Completion
• St. Clairsville, OHSat., March 19, 2016For: Construction & Support Equipment Auction
• San Angelo, TXThurs., March 24, 2016For: Late Model Construction Equipment &more
• Atlantic City, NJMarch 31 – April 2, 2016For: Annual 3-Day Auction: Rental Fleet, LateModel Construction Equipment & more
• Lorton, VA (D.C. Area)Thurs., April 7, 2016For: Liquidation Crane Company
• Racine, WISat., April 9, 2016For: Rental Returns Construction Equipment &more
• Rochester, NYSat., April 16, 2016For: Municipal Construction Equipment, Trucks,Trailers & more
• Houston, TXTues., April 19, 2016For: Late Model Rental Fleet ConstructionEquipment & more
• Johnstown, PAFri., April 22, 2016For: Construction Equipment, Truck & Trailersand more
• Buffalo, NYSat., April 30, 2016For: Large Construction Auction
• Auburn, MEFri., May 6, 2016For: Complete Liquidation Late ModelConstruction Equipment
• Syracuse, NYSun., May 8, 2016For: Late Model Lite Construction Equipment
• Houston, TXSat., May 14, 2016For: Complete Liquidation One OwnerConstruction Equipment
• Long Island, NYSat., May 28, 2016For: Late Model Rental Fleet Equipment
RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631
• Salt Lake City, UTWed., March 9, 2016
• Nashville, TNTues., March 15, 2016
• Kansas City, MOWed., March 16, 2016
• Denver, COMarch 17 - 18, 2016
• North East, MDThurs., March 17, 2016
• Chicago, ILFri., March 18, 2016
• Minneapolis, MNTues., March 22, 2016
• Columbus, OHTues., March 22, 2016
• Sacramento, CAThurs., March 24, 2016
• Atlanta, GAThurs., March 24, 2016
• Albuquerque, NMTues., March 29, 2016
• St. Louis, MOTues., March 29, 2016
• Burlington, IAWed., March 30, 2016
• Raleigh-Durham, NCWed., March 30, 2016
• Chehalis, WAThurs., March 31, 2016
• Kearney, NETues., April 5, 2016
• Pasco, WATues., April 12, 2016
• Manchester, NHThurs., April 21, 2016
BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�
• Sacramento, CASat., March 12, 2016For: Construction Equipment
• Riverside, CASat., March 19, 2016For: Construction Equipment
• Portland, ORThurs., March 24, 2016For: Construction Equipment
• Sacramento, CASat., April 9, 2016For: Construction Equipment
BIG IRON AUCTIONSwww.bigiron.com800-937-3558�
• ONLINE ONLYMarch 9, 2016
• ONLINE ONLYMarch 16, 2016
• ONLINE ONLYMarch 23, 2016
• ONLINE ONLYMarch 30, 2016
• ONLINE ONLYApril 6, 2016
BLACKMON AUCTIONS, INC.www.blackmonauctions.com
501-664-4526
• Pine Bluff, ARTues., March 22, 2016For: Live & Online One Owner Auction
COCHRAN AUCTIONSwww.cochranauctions.com�301-739-0538
• Saint Mary’s County, MDMarch 11-12, 2016For: Semi-Annual 2-Day Contractor’s RegionalEquipment/Truck Auction
• Martinsburg, WVMay 6-7, 2016For: West Virginia Equipment, Trucks & TrailerAuction
DAVIS AUCTIONS, INC.www.davisauctionsinc.com�203-758-4087
• Prospect, CTSat., April 2, 2016For: Construction Equipment
• Prospect, CTSat., June 18, 2016For: Construction Equipment
• Prospect, CTSat., September 17, 2016For: Construction Equipment
• Prospect, CTSat., December 3, 2016For: Construction Equipment
DEANCO AUCTIONSwww.deancoauction.comMS:�601-656-9768
AL:�334-693-2540
• Philadelphia, MSMarch 23-25, 2016For: Huge 3-Day Construction Equip. & TrucksPublic Auction
EQUIFY AUCTIONS, LLCwww.equifyauctions.com888-535-8218
• Sealy, TXMarch 22 - 23, 2016For: Heavy Equipment & more
• Wills Point, TXApril 27 - 28, 2016For: Heavy Equipment & more
• Cisco, TXMay 25 - 26, 2016For: Heavy Equipment & more
• Sealy, TXJune 29-30, 2016For: Heavy Equipment & more
EURO AUCTIONS USAwww.euroauctions.com�770-683-3883
• Houston, TXFri., March 18, 2016For: 100% Absolute Auction
• Atlanta, GAThurs., March 24, 2016For: 100% Absolute Auction
HENDERSON AUCTIONSwww.hendersonauctions.com225-686-2252
• Livingston, LAThurs., March 10, 2016For: Tool & Fabrication Auction
• Livingston, LAApril 1 - 2, 2016For: Spring Construction & Truck Auction
HESS AUCTIONEERSwww.hessauctioneers.net�866-511-2493
• Marietta, PAFri., April 15, 2016For: Truck, Trailer & Equipment
• Marietta, PAFri., June 17, 2016For: Truck, Trailer & Equipment
• Marietta, PAFri., August 26, 2016For: Truck, Trailer & Equipment
• Marietta, PAFri., October 14, 2016For: Truck, Trailer & Equipment
• Marietta, PAFri., December 9, 2016For: Truck, Trailer & Equipment
HILPIPRE AUCTION CO.www.hilpipre.com319-235-6007
• Cherokee, IAApril 6 - 7, 2016For: Dirt Moving, Excavating, Tiling Equipment& more
HOUSBY AUCTIONSwww.housby.com866-218-6266
• ONLINE ONLYMarch 9, 2016
• ONLINE ONLYMarch 30, 2016
• ONLINE ONLYApril 13, 2016
• ONLINE ONLYApril 27, 2016
• ONLINE ONLYMay 11, 2016
• ONLINE ONLYMay 25, 2016
• ONLINE ONLYJune 15, 2016
• ONLINE ONLYJune 29 2016
I.R.A.Y. AUCTIONwww.iraymn.com�320-968-7230
• Foley, MNFri., March 11, 2016For: Heavy Equipment
• Foley, MNFri., June 10, 2016For: Heavy Equipment
• Foley, MNFri., September 9, 2016For: Heavy Equipment
• Foley, MNFri., December 2, 2016For: Heavy Equipment
IronPlanet AUCTIONSwww.IronPlanet.com888-433-5426
• ONLINE ONLYThurs., March 10, 2016For: Well-Maintained Fleet of Trucks Directfrom Walmart
• ONLINE ONLYThurs., March 17, 2016For: Well-Maintained Fleet of Trucks Directfrom Walmart
• St. Cloud, MNWed., March 23, 2016For: Unreserved Public Auction
• ONLINE ONLYMarch 24 - 25, 2016For: Quarry, Aggregate and Mining Sale
• Edmonton, AlbertaWed., March 30, 2016For: Unreserved Public Auction
• ONLINE ONLYMarch 30 – April 1, 2016For: End-Of-Quarter Sale
• Denver, COWed., April 13, 2016For: Unreserved Public Auction
• Rockingham, UKWed., April 20, 2016For: Unreserved Public Auction
• Dallas-Fort Worth, TXTues., May 3, 2016For: Unreserved Public Auction
J.J. KANE AUCTIONEERSwww.jjkane.com�856-764-7163
• South Beloit, ILSat., March 12, 2016For: Heavy Equipment
J.M. WOOD AUCTION COMPANYwww.jmwood.com�800-447-7085
• Montgomery, ALMarch 15-18, 2016For: Huge 4 Day – Truck, Construction &Forestry Auction
JAMES G. MURPHY INC. AUCTIONEERSwww.murphyauction.com�800-426-3008
• Snohomish, WAWed., March 9, 2016For: Sea-Sno Saw Mill: Rolling Stock &Sawmill
• Eureka/Korbel, CAApril 5 & 7, 2016For: The California Redwood Company PublicAuction
• Kenmore, WASat., April 9, 2016For: Heavy & Contractors Equipment & Vehicles
• Kenmore, WASat., June 4, 2016For: Heavy & Contractors Equipment & Vehicles
• Kenmore, WASat., July 30, 2016For: Heavy & Contractors Equipment & Vehicles
• Kenmore, WASat., October 1, 2016For: Heavy & Contractors Equipment & Vehicles
JEFF MARTIN AUCTIONEERS, INC.www.jeffmartinauctioneers.com�601-450-6200
• Florala, ALWed., March 23, 2016For: Absolute Truck & Equipment Public Auction
• Palm Beach, FLWed., April 13, 2016For: Absolute Truck & Equipment Public Auction
MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com�864-947-7888
• Warrenton, GATues., March 22, 2016For: Absolute Job Completion Auction
MOTLEY’S AUCTION GROUPwww.motleys.com�804-232-3300
• Charlottesville, VATues., March 8, 2016For: Construction, Excavation & UtilitiesContractor
• Richmond, VATues., March 22, 2016For: Construction Equipment & Trucks
NITKE AUCTIONSwww.nitkeauctions.com�715-693-4447
• Wausau, WIApril 29-30, 2016For: Annual Spring Auction
PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com�860-642-4200
• Mountainside, NJFri., March 18, 2016For: Major EquipmentLiquidation Auction
• North Franklin, CTApril 7-9, 2016For: 3-Day Major Public Equipment Auction
POWERS AUCTION & EQUIPMENT SALESwww.mikepowersauctions.com�815-338-9700
• Woodstock, ILSat., April 9, 2016For: Annual Spring Contractors & LandscapersAuction
PURPLE WAVE AUCTIONwww.purplewave.com�866-608-9283
• ONLINE ONLYThurs., March 10, 2016For: Manhattan Pipeline & ConstructionEquipment
• ONLINE ONLYTues., March 15, 2016For: Crow Wing Recycling Excess Inventory
• ONLINE ONLYThurs., March 17, 2016For: Construction Equipment
• ONLINE ONLYTues., March 22, 2016For: McBride Construction Retirement
• ONLINE ONLYThurs., March 24, 2016For: Truck & Trailer Auction
• ONLINE ONLYThurs., March 31, 2016For: Construction Equipment
QUARRICK EQUIPMENT & AUCTIONS INC.www.quarrickauction.com�724-439-1621
• Uniontown, PAThurs., April 7, 2016For: Construction & Farm Equipment Sales
RITCHASON AUCTIONEERS INC.www.ritchason.com�800-806-3395
• Lebanon, TNSat., March 12, 2016For: Heavy Equipment, Trailers, Trucks &Commercial Vehicles
• Lebanon, TNSat., June 11, 2016For: Heavy Equipment, Trailers, Trucks &Commercial Vehicles
ROLLER AUCTIONEERSwww.rollerauction.com�866-515-1668
• Denver, COWed., March 16, 2016For: Heavy Construction & ContractingEquipment
• Denver, COWed., May 11, 2016For: Construction Equipment
• Denver, COWed., July 13, 2016For: Construction Equipment
• Denver, COWed., September 14, 2016For: Construction Equipment
• Denver, COWed., November 9, 2016For: Construction Equipment
RTI AUCTIONSwww.teitsworth.com�585-243-1563
• Gerry, NYSat., April 23, 2016For: Chautauqua County Area Municipal &Contractor Equipment
SALES AUCTION COMPANY, LLCwww.salesauctioncompany.com�860-627-7506
• Windsor Locks, CTSat., May 7, 2016For: 7thAnnual Spring Public EquipmentAuction
STEFFES GROUP INC.www.steffesgroup.com�701-237-9173
• ONLINE ONLYFebruary 29 – March 8, 2016For: Tjosvold Equipment
• West Fargo, NDWed., March 9, 2016For: Aglron West Fargo Event
• ONLINE ONLYMarch 4 - 11, 2016For: TireFarmer.com
• Litchfield, MNFri., March 11, 2016For: Jerry’s Pumping Auction
• Litchfield, MNThurs., March 31, 2016For: Aglron Litchfield Event
• ONLINE ONLYApril 6 – 13, 2016For: April Online Auction
• Edinburg, NDWed., April 20, 2016For: Retirement Construction Auction
UTILITY AUCTIONSwww.utilityauctions.net�302-530-9103
• Wilmington, DEFri., April 22, 2016For: Construction, Utility & Forestry Equipment
WAYNE PIKE AUCTION COMPANYwww.waynepikeauction.com763-389-2700
• Princeton, MN Sat., March 12, 2016For: Heavy Equipment Auction
• Princeton, MN Sat., June 11, 2016For: Construction Equipment, Truck & TrailerAuction
• Princeton, MN Sat., September 17, 2016For: Construction Equipment, Truck & TrailerAuction
• Princeton, MN Sat., December 10, 2016For: Construction Equipment, Truck & TrailerAuction
WILSON’S AUCTION SALES, INC.www.wilsonsauction.com�302-422-3454
• Harrington, DESat., March 19, 2016For: Mid-Atlantic Spring Equipment Auction
WSM AUCTIONEERSwww.wsmauctioneers.com�623-936-3300
• Phoenix, AZSat., March 12, 2016For: Construction Equipment, Trucks & more
• Phoenix, AZSat., April 9, 2016For: Construction Equipment, Trucks & more
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
Why Wait?
Auctions Every Month
Sell your equipment with WSM.
1616 S. 67th Ave. • Phoenix, AZ 85043Call Today (623) 936-3300www.wsmauctioneers.com
Specializing in:• Construction Equipment • Utility Trucks• Light Trucks• Equipment Trailers
2nd Saturday of every month.
Next AuctionsSat. March 12 &
Sat. April 9
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 47
IronPlanet/Cat Auction Services’February 2016 Florida auctionsgot off to a big start on Feb. 8 andcontinued its momentumthroughout the week. CaterpillarChairman and Chief ExecutiveOfficer Doug Oberhelman (L) vis-ited the Cat Auction Services auc-tion site and met with GregOwens, chairman and CEO ofIronPlanet/Cat Auction Services.
Rick Albin of IronPlanet wel-comes attendees and gets dayone of the auction started.
IronPlanet/Cat Auction Services soldmore than 2,350 items for $93.8 millionin gross merchandise volume (GMV) at
its auctions in Kissimmee, Fla., from Feb. 8to 12, 2016, an increase of 95 percent overGMV of $48 million for its three-day sale inFebruary 2015. “This year’s Cat Auction Services Florida
sale was our largest auction ever, withunprecedented support from our customers,”said Gregory J. Owens, IronPlanet chairmanand CEO. “The fact that we nearly doubledGMV versus our sale last year clearlydemonstrates the power of our marketplaceand the global reach of our online platform.“The industry recognition and
groundswell of support from all of our sell-ers, including Cat dealers, Volvo, Komatsuand other dealers, as well as major OEMswas fantastic. We had planned for greatthings, and indeed, IronPlanet changed theFlorida auction landscape this year.”IronPlanet had record attendance with
more than 100,000 unique online attendeesfrom 175 countries in addition to more than
1,100 registered bidders onsite. Equipmentreceived international bids from bidders in48 countries.“We were pleased to partner with
IronPlanet this year at their Cat AuctionServices sale in Florida,” said Mike Shane,used equipment specialist of Alta EquipmentCompany. “I was impressed with the selec-tion and diversity of equipment at this year’sauction. It was a great event and we werepleased with our results.”Alta Equipment Company is a provider of
industrial forklifts, heavy constructionequipment and warehouse solutions in theMidwest.IronPlanet expanded its annual Florida
auction to a fifth day this year in order toaccommodate the many sellers who wantedto sell in this event. The auction showcasedequipment from leading OEMs, construc-tion and rental companies, dealers andnational retailers, including Caterpillar,Volvo, John Deere, Komatsu, JLG, Genie,Wal-Mart and more. IronPlanet’s LEADER-BOARD technology provided online bid-
see IRONPLANET page 50
With thousands of bidders in attendance and morethan 100,000 bidders online, sellers had a world-wide market looking at their equipment.
Daman Trotman, director of HorizonConstruction in Turks & Caicos, was amazed atall the iron.
IronPlanet Holds Record Cat Auctions Sale in Florida
Page 48 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Ritchie Bros. Florida Sale Brings in More Than $172M
Thousands of registered bidders pack the arena to participate in the Ritchie Bros. sale.
On display near the main entrance to the sale, was this special gold-paintedVolvo truck. This one of a kind commemorative truck debuted at the Ritchiesale and will tour the United States at Volvo dealer events; then, it will be soldto the highest bidder by Ritchie Bros. at ConExpo next year.
Ravi Saligram (L), CEO, and Terry Dolan, president, U.S. and LatinAmerica, both of Ritchie Bros., review the large inventory of latemodel used Caterpillar machines
Buyers from around the world visited RitchieBros.’ 200-acre Orlando, Fla., site for the year'slargest equipment auction. In just five days,
Ritchie Bros. sold a record 10,700-plus items for morethan $172 million.This year’s unreserved auction on Feb. 15 to 19
attracted more than 9,850 bidders from 79 countries.Out-of-state buyers purchased more than $137 mil-lion of equipment (80 percent), including more than$40 million purchased by out-of-country buyers (23percent).“Orlando is one of our flagship operations — and
it’s clear from the results this week equipment buyersand sellers value the solutions we provide,” said RaviSaligram, chief executive officer, Ritchie Bros.“We’re very pleased to have been able to help 985consignors sell equipment this week, including bothend-users and dealers. Due to the diverse buying audi-ence we attract from different sectors and geogra-phies, we achieved consistent and solid pricing allweek through most asset classes, with particularlystrong results for low-hour, late-model, well-main-tained equipment. I am very proud of our team’sefforts in conducting a world-class sale.”Bidders participated in the auction in person, online
in real time at rbauction.com, and by proxy. Onlinebuyers purchased more than $64 million of equipment(38 percent). All items were sold without minimumbids or reserve prices.“This is not just a U.S. auction; this is a global event
with participation from around the world,” said TerryDolan, president (U.S. and Latin America), RitchieBros. “People travel from across the globe to attendthis auction, and thousands more participate onlinefrom as far away as Belgium, Costa Rica, Colombia,Vietnam, and more.”
Ritchie Bros. sold equipment and trucks from allthe top manufacturers, including Caterpillar, Volvo,John Deere, Komatsu, Terex, Grove, JLG, Kenworth,Peterbilt, Freightliner, International and more.Equipment sold included:• 450+ excavators • 240+ loaders• 200+ compactors• 150+ dozers \• 660+ boom and scissor lifts• 120+ cranes• 500+ truck tractors• 390+ trailersTo watch video of this record-breaking auction,
visit YouTube.com/RitchieBros.
The excavator sale gets under way.
see RITCHIE page 52
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 49
Unused Volvo EC300DL - choice Unused Hamm 3411 - choice 2013 Caterpillar D6K XL
2010 Caterpillar 302.5 2007 Caterpillar D6N LGP 2003 Caterpillar D6R-II LGP
2009 JCB 550-170 - choice
2005 Caterpillar 308C13-14 Caterpillar 305ECR - choice
2008 Takeuchi TL240 2013 Caterpillar CS76 XT 2013 Caterpillar CS56 2006 Caterpillar CS563E2013 Caterpillar 279C2012 JCB 527-55 - choice
2006 Ingersoll Rand DD70 Unused UST GG7500N - choice of 19
2012 Agri Frac MFG Frac Tank - choice
Tomahawk 72” Smooth Bucket
2009 Dynapac CP2212008 Caterpillar CS56
Friday, March 18, 2016 @ 9am CST
100% Absolute Auction
9201 Tavenor LN, Houston, TX,USA, 77075HOUSTON T. +1 470.215.2625
Want to consign your equipment to this auction? Please Call: Steve: +1 678.340.5831Nicholas: +1 205.413.3658Webster: +1 281.900.4583 www.euroauctions.com
Euro Auctions License Number #166902.5% Buyers Premium
Page 50 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
O N E O W N E R A U C T I O NMARCH 22 - LIVE & ONLINE!!
DOZERS, WATER TRUCKS, SCRAPERS, ARTIC TRUCKS, COMPACTORS, ROLLERS, DUMP TRUCKS, EXCAVATORS,SOIL MIXERS, LOWBOYS, BACKHOES, LOADERS, SWEEPERS, MORE
w w w . b l a c k m o n a u c t i o n s . c o m w w w . b l a c k m o n a u c t i o n s . c o m
JOB READY EQUIPMENTONE OWNER EQUIPMENT
Pine Bluff, Arkansas
IRONPLANET from page 47
Online Attendance Exceeds 100,000 Bidders, Breaks Record
The IronPlanet/Cat Auction Services auc-tioneer accepts bids at the sale in Florida.The auction
showcasedequipment fromleading OEMs,construction
and rental com-panies, dealers
and nationalretailers,including
Caterpillar,Volvo, Komatsu
and more.
ders the same views, videos and biddingexperience as onsite bidders, while reachinga worldwide audience.
“IronPlanet’s online platform and globalreach combined with the variety of equip-ment this year brought real strength in num-bers and great demand,” said Gene A. Crow,rental asset manager, Ohio CAT. “This year’sCat Auction Services event delivered one ofthe most comprehensive equipment lineupsof quality Cat and other equipment thatwe’ve ever seen. We’re looking forward toparticipating in more regional Cat AuctionServices events this year.”
(L-R): In town from Verona, Ky., Rick Newman of NewmanTractor catches up with Jeff and Maxx Miller of TrophyTractor, based in Dallas, Texas, at the IronPlanet/CatAuction Services sale.
Wheel loaders are readyfor auction block.
These future contractors, Braden, Ryderand Peyton, enjoyed the auction.
see IRONPLANET page 56
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 51
Page 52 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More Than 9,800 Bidders Participate Online, In Person
Army surplus Cat 621B scrapers offer a unique valuefor potential buyers across the world.
Attendees register to bid. Day one included more than 120 skid steers.
This massive inventory of cranes isready for new owners.
(L-R): Testing out a Grove RT880 crane to purchase for their fleet are Tim Lobato,owner of Lobato Construction, Thornton, Colo.; an inspector from Ring Power; andMike Eller, operator of Lobato Construction.
RITCHIE from page 48 see RITCHIE page 54
Thousands and thousands of bidders participated in Ritchie Bros.’Florida Auctions.
If you are attending one of thebiggest events in the industry youcertainly need a commemorativeshirt. Terry Aldridge, event coordi-nator of Ritchie Bros. shows oneof the many shirts available.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 53
Jodi Amaya TX LIC 16537
HEAVY MACHINERY, EQUIPMENT AND TRUCK AUCTION
MARCH 22 + 23 7044 INTERSTATE 10 | SEALY, TX | 77474
(888) 689-8209 ofc(903) 873-6201 fax
equifyauctions.comSee current inventory and details at
Bid online or in person.
VY MA
CH 2
Y VHEAAVTRUCK A
MARTE AATE 10 | SEALTTA044 INTERS7
2 + 23
CHIY MA ACHINERUCTIK A AUCTION
CH 24774447X | 77 74, T TX | 77YY, TE 10 | SEAL LY
on
4
, EYY, EINERRYUCTION nl Bid o
or QUIPMENT AND, E
r in perr in persline o
on rs
i
QUIPMENT AND
aetd dny arotnevnt inerrue cSe
.nos
7356C 1IX La Tyami AdoJ
om
QUIPMENT ANDcf9 o028-98) 6888(xa1 f026-3) 87309(
t cs.onitcuyafyiuqes al
T ANEMPIUQY EVAAVEH
MMOS + CNOITCUT A
e dhTueq
ecca
AEG + RNIDNEL LAICRE
et dnempiur eqoe fnildaee dgl belis wkcrud tnt anempiu
menginso cyttyilua qgg qntipe
NE + ICNANIE FTAATTTASL EA
s n ioitcue ahr toy frevile Man n oig 7 1hcrMa t xe. T Te IUEQ
stn o ps tnale pkae msael. P
S + AECIVREE SCNARUSN
4 1hcrMa n aoitartsigey rlra. EY FI toY 27852 tseta leh tro f
ao he tvod l’e. Wetapicitrao p
SECIVRET SESSS + A
fg oniweiverd pnn a.niotamro infniotcu at
woe nre aWWe a.uoe yva
Page 54 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Global Auction in Orlando Features Variety of Equipment
Gan Jia (L) and Leyao Ye, both of SANYAmerica Inc., came from Peachtree, Ga., tocheck out the sale.
Caterpillar articulated trucks are set to go to the high-est bidders.Bidders crowd the crane auction ring.
Will Suarez (L) of Ritchie Bros. and the 2012 winner of theDave Ritchie Excellence Award in Sales Performance standswith Ritchie Bros. Founder Dave Ritchie.
Ritchie Bros. had an awe-inspiring amount of equipment go upfor bid during is Florida Auctions.
RITCHIE from page 52
Ritchie Bros. seeks out the most skilledauctioneers from across the world tokeep their auctions running smoothly.
This massive Link-Belt crawler cranewas just a small part of an impressivecrane lineup at the largest equipmentauction in the world.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 55
Bid onsite or online at www.IronPlanet.com
Want to consign equipment?
HOSTED BY PREVIEW LOCATIONAcheson Road West825 - 53016 HWY 60Acheson, AB T7X 5A7
AUCTION LOCATIONEdmonton Marriott at River Cree Resort300 East Lapotac BlvdEnoch, AB T7X 3Y3
PREVIEW ITEMS NOW AT WWW.IRONPLANET.COM
Join IronPlanet® and Cat Auction ServicesUNRESERVED PUBLIC AUCTION IN CANADAMARCH 30 | EDMONTON, ALBERTA
Upcoming Unreserved Public AuctionsSt. Cloud, MN | March 23 Hosted by Ziegler
Denver, CO | April 13 Hosted by Wagner Equipment
Rockingham, UK | April 20 Hosted by Finning UK
Dallas-Fort Worth, TX | May 3
HOSTED BY
825 - 53016 HWY 60Acheson Road PREVIEW LOCHOSTED BY
825 - 53016 HWY 60estWAcheson Road TIONAPREVIEW LOC
300 East Lapotac BlvdEdmonton Marriott at River Cree Resort
AAUCTION LOC
300 East Lapotac BlvdEdmonton Marriott at River Cree Resort
TIONA
Edmonton Marriott at River Cree Resort
(780) 238-1560 | [email protected] Sue McGregorManaging Directo
ant WWant to
(780) 238-1560 | [email protected]
: IronPlanet CanadarManaging Directo
Acheson, AB T7X 5A7825 - 53016 HWY 60
consignant to
(587) 991-9965 | [email protected] Clay LindsayNorthwest Alberta
Acheson, AB T7X 5A7825 - 53016 HWY 60
equipment?consign
(587) 991-9965 | [email protected]
Enoch, AB T7X 3Y3300 East Lapotac Blvd
PLEASE CONTACT YOUR LOCAL REPRESENTATIVEequipment?
(587) 988-5119 | [email protected] MillsAlberta
Enoch, AB T7X 3Y3300 East Lapotac Blvd
PLEASE CONTACT YOUR LOCAL REPRESENTATIVE
(587) 988-5119 | [email protected]
PLEASE CONTACT YOUR LOCAL REPRESENTATIVE
(780) 914-5299 | [email protected] HuotNorthern Alberta
t. Cloud, MN S
Upcoming Unreserved Public Auctions
(780) 914-5299 | [email protected]
ed btHosch 23 Mar|t. Cloud, MN
Upcoming Unreserved Public Auctions
(778) 847-7957 | [email protected] DicksonBritish Columbia
y Zieglered b
Upcoming Unreserved Public Auctions
(778) 847-7957 | [email protected]
ockingham, UKR
Upcoming Unreserved Public Auctions
(587) 434-7707 | [email protected] WicksOil & Gas / Southern Alberta
ed btHos April 20 |ockingham, UK
(587) 434-7707 | [email protected]
Oil & Gas / Southern Alberta
y Finning UK ed b
Bid onsite or online at www.IronPlanet.com
O, Cerr, CvDen
Bid onsite or online at www.IronPlanet.com
y Wed btHosApril 13 |
Bid onsite or online at www.IronPlanet.com
quipmentagner Ey W
Bid onsite or online at www.IronPlanet.com
orth, TXort WDallas-F
Bid onsite or online at www.IronPlanet.com
y 3Ma | orth, TX
Bid onsite or online at www.IronPlanet.com
Page 56 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fifth Day Added to Accommodate Sellers at 2016 Fla. Auction
Poinciana Blvd. in Kissimmee has a long history of hosting majorequipment auctions in February. This was among the most impressiveexcavator lineups this sale site has seen in many years.
Purchased at the IronPlanet sale, aJohn Deere 70C LGP went home withJames (L) and Robby Alberson ofRobby’s Equipment Sales, Widener, Ark.
The IronPlanet/Cat Auction Services sale was not limited to Catmachines or earthmoving equipment; these aerial lifts wereproof of that.
Old friends have a chance to catch up at theIronPlanet/Cat Auction Services sale. (L-R): Dean Adsit,used equipment sales, Nortrax; Monte Garner,IronPlanet; father and son team of Jeff and Maxx Miller,Trophy Tractor Inc.; and Daryl Crear, Rumpke Landfill.
Jumbotrons strategically placed aroundthe sale site kept bidders on track withitems currently being sold.
James Jeter (L), president, and GregoryOwens CEO of IronPlanet/Cat AuctionServices, were very pleased with the sizeand scope of the sale.
An impressive lineup of motorgraderswent on the block.
The Pentz family, owners of the Calvin Group inWindsor, Colo., head into the IronPlanet/Cat AuctionServices sale. (L-R): Mike; his father, Mark; and broth-er Matt.
IRONPLANET from page 50
Onsite or online, more than100,000 registered to bid onthe largest collection of latemodel Cat equipment eversold.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 57
Our exclusive IronClad Assurance equipment condition certification enables buyers to bid with a high degree of confidence resulting in better auction prices for sellers.
Consign today - Please contact your local representativeSALES DIRECTORJIM ABBOTT (970) 631-5422 [email protected]
NORTHERN COLORADOTERRITORY MANAGER MIKE FARGHER (303) [email protected]
SOUTHERN COLORADO TERRITORY MANAGER DAVE WEST (719) 651-6886
KANSAS / NEBRASKA TERRITORY MANAGERJUSTIN BATTY (402) [email protected]
NEW MEXICO TERRITORY MANAGER BRIAN ADAMS (505) 262-1066
WHY SELL WITH CAT AUCTION SERVICES
IronClad Assurance® builds buyer confidence
Drive the right buyers to the sale | Higher selling prices
Strong local participation | Global exposure to thousands of online bidders
Reaching 1.4 MILLION IronPlanet users
Reaching thousands of potential buyers through additional advertising channels
UNRESERVED PUBLIC AUCTION
All equipment sold onsite or virtually from your lot.Denver, CO | April 13
Consign Equipment Now! Visit www.IronPlanet.com
onsign EC
quipment Noonsign E
w! Vquipment No
onPlanet..Irwwisit ww! V
omconPlanet.
om
ed BtHos
WHY SELL WITH C
onClad AsIr
y:ed B
T AAT AWHY SELL WITH C
e® builds buyancsuronClad As
VICESUCTION SERT A
onfidencer ce® builds buy
tion:ocauction LA
VICES
e onfidenc
tion: quipment Cagner EWoad18000 Smith R11O 800a, CorurA
.oquipment C
eaching thousands of potR
clusivxOur eo bid with a high degrers tbuy
e the right buyDriv
ong local participatrS
R
ac thousands o
ancsuronClad Ase Irclusivee of co bid with a high degr
o the saleers te the right buy
tion ong local participa | xposur Global e
eaching 1.4 MILLION IrR
ers thrential buyeaching thousands of pot
ondition ce equipment cancesulting in bette ronfidencee of c
o the sale | Higher selling pric
o thousands of online bidderse txposur
onPlanet users eaching 1.4 MILLION Ir
ough additional advers thr
tion enables ertificaondition cer auction esulting in bett
es Higher selling pric
o thousands of online bidders
ertising channelsough additional adv
ertising channels
odaonsign tCALES DIRECTS
TTJIM ABBOonPlanet.jabbott@Ir
OLTHERN CNORY MANAORTERRIT
o bid with a high degrers tbuyor sellers. es fpric
ontact yy - Please codaORALES DIRECT
( 31-54220) 679omconPlanet.
ORADOOLGERY MANA
ee of co bid with a high degror sellers.
our local rontact y
31-5422
esulting in bette ronfidencee of c
etivesentaeprASKS / NEBRAAANSK
GERY MANAORRY MANATERRITTTYATIN BJUS
omconPlanet.tty@Irjba
ONEW MEXIC
er auction esulting in bett
( 024 ) 3094405-
Y MANAORTERRITARGHERMIKE F FARGHER
onPlanet.gher@Irarmf
OLSOUTHERN CY MAORRY MANATERRITTVE WESAAVE WESDA
onPlanet.t@Iresdw
Califor
GERY MANAARGHER ( 033 ) 96-51173
omconPlanet.
ORADOOLGERY MANA
( 197 ) 651-6886omconPlanet.
ar e regist®IronClad AssuranceCalifornia Auction Company Bond #70259785. Pr
96-5117
651-6886
red service marks of Irtered service marks of IronPlanet, Inc. All other marks and brands ar e 785. Preliminary list to date. Equipment subject to change. © 1999-2016 Ir
ONEW MEXICGERY MANAORRY MANATERRIT
AMSBRIAN AD AomconPlanet.badams@Ir
onPlanet, Inc. All other marks and brands are the property of their reliminary list to date. Equipment subject to change. © 1999-2016 IronPlanet, Inc. All Rights Reserved. Ir
(505) 1066262-om
operty of their respective owners., ®onPlanet, Inc. All Rights Reserved. IronPlanet
Page 58 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
ALLU GROUP ................................................................................13
ARTIC SNOW & ICE CONTROL...................................................14
ATI CORPORATION/LEVEL-BEST...............................................12
BAR NONE AUCTION
PORTLAND OR ....................................................................53
BARGAINS.....................................................................................44
BLACKMON AUCTIONS
PINE BLUFF AR....................................................................50
CATERPILLAR INC...................................................................36,37
CEG SCALE MODELS ..................................................................16
CLASSIFIEDS ................................................................................44
CONSTRUCTION EQUIPMENT GUIDE
WANTED ...............................................................................45
AUCTION TRIPLE BUY........................................................51
DOOSAN INFRACORE AMERICA CORP....................................21
DOOSAN PORTABLE POWER.....................................................60
DYNAPAC.........................................................................................9
EQUIFY AUCTIONS LLC
SEALY TX..............................................................................53
ESCO CORP..................................................................................32
EURO AUCTIONS UK LTD
HOUSTON TX.......................................................................49
FELLING TRAILERS......................................................................27
FLANGE LOCK ................................................................................2
FLECO ATTACHMENTS................................................................12
FLUID CONTROL SERVICES.........................................................6
GROVE CRANE.............................................................................28
HENDRIX MACHINERY LLC...........................................................3
HENNESSY INTERNATIONAL........................................................2
HYDRAULICIRCUIT TECHNOLOGY............................................13
IROCK CRUSHERS.......................................................................41
IRONPLANET
DENVER CO .........................................................................57
IRONPLANET
EDMONTON ALBERTA ........................................................55
KAWASAKI CONSTRUCTION MACHINERY ...............................15
KOBELCO ......................................................................................29
KOMATSU AMERICA CORP..............................................6,7,18,19
KPI-JCI ...........................................................................................41
LINK-BELT EXCAVATORS .......................................................30,31
LIUGONG CONSTRUCTION MACHINERY.................................17
MAVERICK EQUIPMENT..............................................................27
METSO MINERAL SCREENING...................................................35
METSO MINERALS CRUSHING ..................................................43
NATIONAL ATTACHMENTS..........................................................14
NORAM .....................................................................................22,23
POWER EQUIPMENT CO ............................................................39
RANSOME EQUIPMENT SALES LLC/LRH .................................45
RITCHIE BROS. AUCTIONEERS .................................................59
ROAD BUILDERS MACHINERY................................................5,13
ROLLER & ASSOCIATES AUCTIONEERS
DENVER CO .........................................................................47
SCHAEFER ENTERPRISES.........................................................14
THE SCREEN MACHINE...........................................................6,38
VOLVO CONST EQUIP & SVCS ..................................................20
WSM AUCTIONEERS
PHOENIX AZ.........................................................................46
TEXAS STATE SUPPLEMENTBANE MACHINERY.......................................................................24
BAYONET-RECS ...........................................................................23
BLUELINE CONST EQUIP & SERVICES.......................................9
CONSTRUCTION EQUIPMENT GUIDE.......................................22
COOPER EQUIPMENT/BAGELA .................................................21
DITCH WITCH WEST....................................................................13
EAGER BEAVER TRAILERS ........................................................15
FECON ...........................................................................................21
FLEMING MANUFACTURING LLC...............................................17
FOUR SEASONS EQUIPMENT INC ..............................................3
H H FABRICATION ........................................................................16
INTERSTATE TRAILERS...............................................................11
KIRBY-SMITH MACHINERY INC ....................................................8
KLEIN PRODUCTS OF TEXAS ....................................................12
KUBOTA SVL .................................................................................21
MIDCO SLING AND CABLE..........................................................20
RAYCO MFG..................................................................................20
ROMCO EQUIPMENT CO ..............................................................2
TROPHY TRACTOR........................................................................7
US SHORING & EQUIPMENT CO ...............................................19
VERMEER OF TEXAS-LOUISIANA................................................5
WAUKESHA-PEARCE INDUSTRIES INC......................................8
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • March 6, 2016 • Page 59
Unreserved public equipment auctions
56,200+ items in 140+ auctions including
rbauction.com
Special limited-time financing offer! No payments for 90 days*
Used Motor Vehicle Dealer License #2647, Auction Firm #2389, Auctioneer Eddie R. Graham #2237, Auction Firm License #444.000193, Auctioneer Greg M. Highsmith #441.000865, Auction Firm #2008000166, Auctioneer Frederick R. Vilsmeier #2004000137, Motor Vehicle Dealer License #DLR25867, Auctioneer Eddie R. Graham #7014014, Auctioneer Patrick J. Hicks Bond #0470727, Auction Company License # 001348, Auctioneer Gregory S. Fuqua #AU002665, Auction Firm License #6980, Motor Vehicle Dealer License #0061711, Auction Company License #1981, Motor Vehicle Dealer License #1539, Auction Company License # 1981, Motor Vehicle Dealer License #1539 *Limited-time offer from Ritchie Bros. Financial Services. OAC. Terms & conditions apply. See rbauction.com/financing.
ed-time finl limitaiSpec
Unr
ing offanced-time fin
lic equipment auctionsbued pvved pserrverr
mentyaer! No p off ffer! No p
lic equipment auctions
s*yys*aor 90 ds f for 90 dment
lic equipment auctions
lt LaSaherr L580 | Lieb
itye Cklt La erpiat2 – C
itye Cklt LaSa9C | 6ar 7 76llerpi
e Cklt LaSa13 | H6k CacM
31E | ar 6llerpiatCitye C
itye Cklt LaSa31E |
lt LaSaherr L580 | Lieb
itye Cklt La erpiat2 – C
itye Cklt LaSa9C | 6ar 7 76llerpi
e Cklt LaSa13 | H6k CacM
31E | ar 6llerpiatCitye C
itye Cklt LaSa31E |
ar D8T | Denllerpiat2 – 2008 C
ervar D8T | Den12 Gr20
w metoL
onTTonT540E 40 e R RT540E 40 vo2 Gr roervs 4x4x4 | Denrer houw met
-10 | DenC90Lu PC2satom12 K20
14H VHP ar llerpiatCerv-10 | Den
oamentr| Sac14H VHP
ems in 140+ auctions inc56,200+ it
Sacar 330DL | llerpiatC
, UTitye C LakSaltt
ludingems in 140+ auctions inc
oamentrSac 22 22 T5e R TvoGrro
ar 9M s, OHubmluoC
luding
oamentrSacon 4x4x4 | TTon 4x4x4 | 22 22
ar 22Ms, OH C
k CV713 Grac7 M2 of 3 – 200queuquerrqueblA
ar MAs W WAalihehC
e 310G 4x4 | Ahn DeerJoeanitk CV713 Gr
13 or son perin Bid
queuquerble 310G 4x4 | A
lineon
i
, UTitye C LakSaltt Lakle, TNlivhsNa
, MOity CsaansKar 1MO, CervDen
t, MDsath ENor, ILoaghicC
s, MNliapoMinne
ion Firm #2389, ctAu License #2647, erale DelehicVVehicorotsed MUsmeierliV R. kederic FrerionectAuion Firm #2008000166, ctAu
ionectAuy License # 001348, ompanCion ctAuBond #0470727, ion ctAu License #1539, erale DelehicVorotLicense #1981, M
C. A. OicesvvSeralianc. Finsorhie Bitcom Rfrerfime of*Limited-t
ar 9M51ar M
ar 16M7–18ar 1
7ar 1Mar 18Mar 22M
s, OHubmluoC, CAoamentrSac
a, GAantAtlque, NMuquerblA
s, MOoui. LSton, IAtrlinggtuB
am, NCrhaleigh-DuR
ion Firm License #444.000193, ctAuam #2237, ahGrdie R. EderionectAuion Firm #2389, EderionectAuR25867, License #DLerale DelehicVeorot #2004000137, Msmeier
orotion Firm License #6980, MctAuU002665, uqua #A. FSory geGrerione License #1539erale DelehicVoroty License # 1981, MompanC
g.inancom/finion.ccte rbauSe. plyy. apionsondit & cermsT
ar 22Ms, OH4ar 2M, CA4ar 2M
ar 29Mque, NMar 29Ms, MOar 30Mon, IAar 30Mam, NC
CKPFinUp tno money
h #441.000865,g M. HighsmiteGrerionectAuion Firm License #444.000193, sk J. Hickatric PerionectAuam #7014014, ahGrdie R. Ed
yompanCion ctAu License #0061711, erale DelehicVVehic
& auction l luffuSee
ar MAs, W WAalihehCApr 5, NEarneyeK
Apr A, W WAoscaPbalaivaing sale& ing ancFin
ithing, wanco 100% finUp twn. dono money y do
ats tinggs sliequipment &
13Apr 5
12leb
or son perin Bid idm bNo minimu▸
pect and instt and insseTTe▸buo the pOpen t▸
added ems ite Morling: sel aboutlalC
omauction.crb
lineonsee pricvsere or rsid
eits on-pectationrrationtsegiee rrlic, fb
lyaidadded 31.39811.800.2
Page 60 • March 6, 2016 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Air CompressorSolutions, Inc.
TEXASOdessa
(432)�335-5900
Ditch Witch of Arizona
ARIZONAPhoenix
(602)�437-0351
Ditch Witch of Southern Arizona
ARIZONATucson
(520)�579-0261
Sierra Machinery, Inc.
www.sierraelpaso.com
TEXASEl�Paso
(915)�772-0613
NEW MEXICOArtesia
(575)�746-6592
Volvo ConstructionEquipment & Services
CALIFORNIABakersfield
(661)�387-6090Fresno
(559)�834-4420San�Leandro(510)�357-9131Sacramento
(916)�388-2244San Diego/Lakeside(619)�441-3690
Corona(951)�277-7620
Papé Material Handling Inc.
www.papemh.com
OREGONPortland
(503)�639-8910Portland
(503)�286-6400Eugene
(541)�689-7407Medford�
(541)�779-3444
NEVADASparks�
(775)�356-9333
WASHINGTONSeattle�
(206)�722-5800Arlington�
(360)�474-8461Fife�
(253)�926-4386Bellingham�
(360)�756-6572Yakima�
(509)�248-5636Pasco�
(509)�545-1959Wenatchee�
(509)�884-2934Spokane�
(509)�536-7300