Welger Maschinenfabrik GmbH - Agriquipagriquip.co.za/pdfs/Vergleich RP 220 RP 235.pdfRP 220 RP 235...

www.welger.com

RP 220 - RP 235

Back

RP 220 RP 235 Advantages:

- higher capacity,improved work capacity

- better protection

600 Nm

overload protection

900 Nm

overload protection

1. Pick up: Overload protection


20 mm longer knife

Advantage of longer knives

- better cut material

- longer life

Short knife

20 mm

1.1 Cutting device: Knives


1.2 Cutting device: No. of knives

Farmer and Master

XtraCut17 with17 knivesand knive groups

MasterCut13 with 13 knives

MASTERCUT with 12 knives

- better chopped material

- higher density in bale

- better silage quality

More knives =

- less Bales =less cost for net, film and transport

- easier feeding

Knive groups =

- easy changing of cutting- length- always ready for the - customers request

- less maintenance


1.3 Cutting device: No. of knives

XtraCut25 with 25 knivesand knive grouping

PROFICUT with 23 knives

ProfiProfi- more intensive chopping

- 15% higher density- better silage quality

More knives =

- less Bales =less cost for net, film andtransportation

KNIVE GROUPING =- easy setting of different

chopping length

- ready for all harvest conditions

- less maintanance


One accumulator 35bar

Two accumulators each40 bar

- improved chopping

quality

- improved protection

1.4 Cutting device: Knife protection


1.5 Cutting device: Connection knife shaft lever

Two roll pins: outer 10x50 inner 6x50

Two row pins: outer 13x60 inner 8x60

- higher stability

- extended lifetime


Improved loading with

Easy Load System:

-Easier changing ofthe net rolls

with ELS

without ELS

2.1 Net tying unit: Net loading


Rubber-Clamp connection

Solid location spigot

- easier loading- no wearSolid Connection between the net rolland brake

2.2 Net tying unit: Net roll and brake


Handle with threadEasy slide connection

- easy and safe operation

- no lifting of heavynetrolls in difficult positions.

2.3 Net tying unit:


E-Link

Electronic setting via E-Link handset

Mechanical setting

-better for contractors different customersdifferent requests

- easy setting of the net length from thetractor seat

2.4 Net tying unit : Net length control


Belville springs Elastomer block

- low maintenance

- robust

- service friendly

no service problemsas the machine ages

3. Density device


60 mm 70 mm

Standard Axle Stronger axle

- higher stabillity

- for all conditions

- more safety

4. Axle


- no overheating

- safer road driving

- less field damage

Valve with fixed pressure

Valve with adjustable Breaking Power

5. Airbrakes


Only able to connectto the tractor with a pin

pin

and ball hitching available

• 40 km/h

• Ball head drawbar =

• higher stabillity

• higher working comfort

• higher security

6. Drawbar

RP 220 RP 235 Advantages:Master and Profi - Excellent machine

monitoring

- Easy setting of following functions:

Density settingNet length controlKnife groups

- Operation of following functions:

Pick-up,Hydroflexcontrol, Knives in/out

- Fault indication on the Display

- 20 Bale counters

- Extended Diagnosis

7. Operation

RP 220 RP 235 Advantages:BC III E-Link

No RPM control RPM controlFollowing functions require machine revolutions:• working time count• permanent bearing lubrication (Option)

- improvedoperational control

- True registration of working time

- Lubrication only when required

7.1 Operation: Monitor


7.1.1 Operation: Monitor

BC III E-Link

- operation with onebutton

- simpler for theoperator


- knife groups

- operation with onebutton



- screen easierto understand

Indication: Knives in Indication: Knives in,Group of 12 in work

Indication: Knives out Indication: Knives out



- easier operation

- perfect for all conditions

- setting direct from the tractor seat

Mechanical setting of net length, no indication on theDisplay available

Electronic setting of the net length via E-Link handsetIndication shown on Display


BC III E-Link


The density setting needed to be carried out with acombination of buttons

Density setting with only one button

- One button operation

- More operatorfriendly



Indication floor opensmall symbol in bottom corner

Indication floor openeasy to see in the center of the screen

- Operator friendly



New set ups:Delay in 0.1 stepsBeeper adjustable in soundKnife groupsPermanent bearing lub

7.2 Operation: Setup

BC III E-Link

The Delay can only set 0- 2.5and 5 sec.

- more information- adaption to all

conditions


- improved functioncontrol

Improve control:Net feedingKnife groups

7.3.1 Operation: Diagnostic


7.3.2 Operation: Diagnostic

BC III E-Link- improved function

control

Lub pumpNet motorKnive split


• 15 teeth

• 6010-2RS bearing

• Bearing held in

sprocket with 3 bolts

• 16 teeth

• 6210-2RS bearing

• Bearing held in sprocket with 2 circlips

- higher stabillity

- longer working

life

- less repairs

8. Idler sprocket Chain drive


-Steps easy to fold away, safer access

-reduced turning circle

9. Ladder


Guarding:Front opensrear bolted

Guarding:

Fully opening

- comfortable accessibility

- maintenance andservice made easy

10. Guarding

www.welger.com

RP 220 - RP 235

Back

Welger Maschinenfabrik GmbH - Agriquipagriquip.co.za/pdfs/Vergleich RP 220 RP 235.pdfRP 220 RP 235...

Documents

Transcript of Welger Maschinenfabrik GmbH - Agriquipagriquip.co.za/pdfs/Vergleich RP 220 RP 235.pdfRP 220 RP 235...