Welding Visual Inspection System - twn-technology.com
Transcript of Welding Visual Inspection System - twn-technology.com
Welding Visual Inspection System
■ Visual and measuring inspection of weld, edges geometry
■ Laser profiling and video recording■ Reflecting surfaces compatibility■ Real-time analysis and recording data
■ Wi-fi data transmission
■ Working time up to 8 hours■ Operating temperature -40..+50 ° С
■ Control of butt joints and T-joints
Parameter Value
Field of view of the laser scanner, mm depth - 120, beam length 30 ... 110
Max Sampling rate, profiles/s >2000
Measurement error, mm ±0,07
Resolution of laser line, mm 0,025…0,08
Camera resolution 1296 х 976
Camera FPS up to 120
Laser spectrum red (660 nm) or blue (405 nm)
Laser Safety Class Type 2 (IEC60825-1)
Operation temperature -40…50 °С
Measuring Parameters width, height, angles, misaligment edge, undercuts, concavity, bulge, scaly, pore, etc.
Software for 3D visualization and analysis supplied in the kit
AVICScan
Install the system on the weld
Scan your weld
Select a template of inspected weld or edges, check list of parameters and tolerances
Create a measurement report, transfer data to the PC
Step 2
Step 4
EASY
TO US
E
Wi-Fi
tocuhscreen
Protected case Built-in li-ion batteries
HeightAdjustment
LED camera
2D laser
Enctodered magnetic wheels
Step 1
Step 3
■ Posible use in automated systems
Welding Visual Inspection System AVICScan