Welding Revision
description
Transcript of Welding Revision
![Page 1: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/1.jpg)
Welding RevisionLC Engineering
![Page 2: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/2.jpg)
Gas Welding Revision
Stages of combustion
Primary Combustion – Acetylene & Oxygen burn in the primary combustion zone to give off Carbon Monoxide and Hydrogen.
C2H2+O2 2CO+H2
Secondary Combustion – oxygen is sucked in from the weld pool and is burned with Carbon Monoxide & Hydrogen to give off Carbon Dioxide and Water vapour.
CO+H2+O2 CO2+H2O
![Page 3: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/3.jpg)
Types of FlamesThe Oxidising Flame
This is a result of excess Oxygen. Approx 1.5 parts oxygen to 1 part acetylene. If used with steel the excess oxygen would contimnate the joint, so it is used for copper and some bronzes. It has a temp. of about 3500ºC
max temp zoneinner cone
secondary combustion zone
![Page 4: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/4.jpg)
The Carburising FlameThis is a result of excess Acetylene. Approx 0.9 parts oxygen to 1 part acetylene. Has a temp of approx 3150ºC and is used for welding alloy steels and aluminium alloys
max temp zoneinner cone
secondary combustion zone
C
Acetylene feather
![Page 5: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/5.jpg)
Transformer/ RectifierTransformer RectifierDropping Voltage means
current increases current, which is needed for welding.
There is a primary and secondary coil.
The number of windings on each coil controls the output current.
Primary 100 Turns and 220V and 10A
Secondary 200 coils = 110V & 20A
The Rectifier converts AC to DC.
It uses 4 diodes arranged in a diamond shape.
2 diodes conduct in each half-cycle.
The capacitor ensures a smooth output.
![Page 6: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/6.jpg)
Transformer/Rectifier
![Page 7: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/7.jpg)
MIG/MAGSMetal Inert Gas/Metal
Arc Gas Shielded.Semi-automatic ProcessConsumable Electrode
fed automatically.Argon gas protects the
weld pool like a flux.No slag produced.Suitable for steel.
Argon Gas
Wire Feed
Power Plant
Welding Gun
Electrode
NOTE: CO2 welding is a form of MIG/MAGS
![Page 8: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/8.jpg)
TIG/TAGSTungsten Inert GasNon –consumable
Electrode.Filler rod used.Argon gas protects
the weld pool like a flux.
Suitable for Aluminium & Stainless Steel.
Filler Rod
NOTE: Label the diagram using MIG/MAGS as a reference.
![Page 9: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/9.jpg)
A Transformer steps up and down the voltage to set welding currents.
The Rectifier converts AC to DC using a series of diodes.
![Page 10: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/10.jpg)
Resistance Spot Welding
![Page 11: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/11.jpg)
Resistance Seam Welding
![Page 12: Welding Revision](https://reader035.fdocuments.us/reader035/viewer/2022081520/56816668550346895dd9ff3b/html5/thumbnails/12.jpg)
Submerged Arc Welding