Pricing in effect until April 8, 2011 or while quantities last. Taxes and freight extra. Issue #SDW4516NA**DUE To cUrrENT mArkET flUcTUATIoNS, PrIcES mAy vAry WIThoUT PrIor NoTIcE.**

welding products promotion!

Hotspotter All-purpose propAne torcH Kits

Works off the pressure of a propane tank - no regulator required•Professional kit includes:• Ergonomic handle with adjustable trigger, contoured nozzle and push button igniter switch (pull trigger for maximum burning, release to return to pilot flame)Heavy-duty kit includes: • Cast iron nozzle and strikerBoth models come with 10' neoprene hose, •on/off valve and 500 000 BTU rating

312-4904

312-4903

model mfG Promo No. No. Description Price312-4903 WB-100 Professional 84.95312-4904 WB-101 Heavy-Duty 80.95

element welding Helmet

Lightweight shell weighs only 6 oz. •and is designed to prevent hot embers from sitting on itVariable shade auto-darkening •filter, shade 9-13Two independent arc sensors•Lens speed less than •0.005 microseconds with adjustable delay 0.1 - 0.9 secondsSolar-powered unit•

model mfG Promo No. No. PriceSEA769 3023293 79.99

FlAme retArdAnt JAcKets Flame retardant treated cotton sateen •Will retain flame retardant properties •for up to 50 normal washings Specially designed underarm •sport cut and hemmed collarInside pocket and five snaps•

model chest Promo No. Size measurements" PriceTTU370 Medium 40-42 22.99TTU371 Large 44-46 22.99TTU372 X-Large 48-50 22.99TTU373 2X-Large 52-54 24.99TTU374 3X-Large 56-58 26.99

2

722-1030

898-1003-KIT

mAgnetic HoldersMulti-purpose holders for •assembly and positioningAdhere to any metal object•Ideal for welding, •soldering, assembly and pipe installation

model Promo No. Description Dimensions" PriceNT626 Medium 5 x 3 1/4 x 1/2 3.10 NT627 Large 6 1/4 x 4 x 3/4 4.95 NT628 X-Large 8 x 5 x 1 7.90

propAne regulAtor & HosesHigh pressure industrial/commercial regulator•

For liquid or vapour service with portable •torches or construction heaters

Rated for approximately 1 000 000 BTU•Includes fittings; 0 - 50 PSIG•

10' and 20', 1/4" diameter •propane hoses, sold separately

model Promo No. Description Price898-1003-KIT Propane Regulator 45.50722-1010 Propane Hose, 10' 24.95722-1030 Propane Hose, 20' 45.95

BrAss gAugesLexan• ® cover lensReads air and gas pressure•

model Promo No. Description PriceNT616 2" x 100 PSI 7.15NT617 2" x 200 PSI 7.15 NT618 2" x 30 PSI - Red Line 7.15 NT619 2" x 400 PSI 7.15 NT620 2" x 4000 PSI 7.85

NT622 2 1/2" x 200 PSI 7.85NT623 2 1/2" x 30 PSI - Red Line 7.85NT624 2 1/2" x 400 PSI 7.85NT625 2 1/2" x 4000 PSI 7.85

multi-purpose mig pliers8-way pliers•

Nickel-plated finish•Ideally suited for removal of hot spatter •

from nozzle ends, as well as many other uses

NT666

NP537

model Promo No. Description PriceNP537 MIG Pliers 9.95NT666 Holster for MIG Pliers 5.30

tip drill KitCleans welding tips and a variety •of other fuel orifices and injectors

Promotes more effective fuel use •and increases performance in

welding, cutting and heating tipsDrills store neatly in pipe vise handle•

Includes:• 10 drills in sizes 52-74

model Promo No. PriceNT660 10.75

cHipping HAmmerCone and chisel head, 6 1/4" long•Spring steel handle•Overall length: 10 1/2"•

model Promo No. PriceNP532 3.99

3

Airco® 164/Alc 803 stYle cutting tips

For general, and cast iron or stainless steel cutting•Acetylene-oxygen•Very high preheat•Fits • Airco® 3790, 4690, 4700, 4800, 5700, 5800, 1100, 3000, 9000 and 9500 style torches

model Promo No. Size PriceTTU358 0 10.99TTU359 1 10.99TTU360 2 10.99TTU361 3 10.99TTU362 4 10.99

HArris® 6290 stYle cutting tipsFor general hand cutting•Acetylene-oxygen•Medium preheat•Fits • Harris® 42-3, 62-3, 72, 72A, 73, 73A and 85 style torches

model Promo No. Size PriceTTU349 0 8.49TTU350 1 8.49TTU351 2 8.49TTU352 3 8.49

Victor® 1-101 stYle cutting tipsForgeneralcutting • Acetylene-oxygen•Machine preheat for hand and machine cutting•Fits 2460, CA 1060, ST, SST and 1400C machine torches•

model Promo No. Size PriceTTU333 00 7.69TTU334 0 7.69TTU335 1 7.69TTU336 2 7.69TTU337 3 7.69TTU338 4 7.69TTU339 5 7.69

HeAVY-dutY c-stYle ground clAmp

C-type jaws are adjusted •by screw lever

Rubber-insulated •cable connector

model Promo No. Amps PriceNT665 600 43.95

881-1355

881-1350

deFense Anti-Freeze & pump luBricAnt

Provides year-round pump protection for •water coolers and closed loop water systemsContains a lubricant additive•Silicate-free formula prolongs seal and shaft life•Protects from freezing to -30°F when •undiluted (a dilution of two parts Defense to one part water protects to -10°F) except for pre-mixed formula

Note: Although Defense is a permanent anti-freeze and pump lubrication solution, it should be changed annually to maintain maximum anti-freeze protection and pump lubrication.

pipe JAcKsCollapsible for portability •without sacrificing load capacity2000-lb. rating•V head• will handle pipes from 1/8" to 36" diameterSteel roller head• will handle pipes from 1 1/4" to 24" diameter

model mfG Promo No. No. Size Price881-1355 DF927-PM 1 Gallon, Pre-Mixed 18.95 881-1350 DF929-4x1 1 Gallon 27.95881-1365 DF929-5 5-Gallon Pail 129.95

model mfG Promo No. No. Description Price432-1161 781300 V Head 128.95432-1162 781301 Steel Roller Head 169.95

cABle/Hose coVerLightweight durable leather with •Kevlar® sewn seams for flexibility and strengthMetal snaps every 3"•For TIG, MIG, plasma •and flux-cored torch cable/hose assembly22' L x 4" W•

model Promo No. PriceNP520 37.95

4

848-1305

848-1170

stAY-silV® HigH silVer BrAzing AlloYs KitsCadmium-free, high silver brazing alloys are •manufactured using only the purest base metals Precision production procedures ensure •consistency in product quality and performance

Safety-Silv® 45 - Excellent general purpose non-toxic brazing alloy. Good ductility and capillary flow. Colour is silver to light yellow as in polished brass.

Safety-Silv® 56 - This high silver (56%) content alloy makes first quality brazes. Ductility is high, corrosion resistance suitable for all but strong chemical applications. Highest elongation of silver brazing alloys. Silver colour is an excellent match for stainless steel and silverware applications.

model mfG chemical Promo No. No. Description composition Spec. Solidus liquidus Typical application Price 848-1305 45K Safety-Silv®45 Kit 45% Ag AWS A5.8 1225°F 1370°F General purpose filler for steel 35.95 (1 oz. Coil & 1.75 oz. Flux) 30% Cu BAg-5 663°C 743°C and copper alloys. Melting range 25% Zn useful for wide clearances.

848-1170 56K Safety-Silv®56 Kit 56% Ag AWS A5.8 1145°F 1205°F For ferrous and non-ferrous alloys. 40.95 (1 oz. Coil & 1.75 oz. Flux) 22% Cu BAg-7 618°C 652°C Often used to braze stainless steel 17% Zn, 5% Sn NSF 51 for food service.

848-1090

stAY-Brite® silVer solder Kit witH FluXSilver bearing solder is often used instead of brazing alloys •throughout the refrigeration/air conditioning industryBonds with all ferrous and non ferrous alloys•Joints exhibit considerably higher-than-necessary elongation •for sound, dissimilar metal joints and vibration applicationsFor use with all metals with the exception of aluminum •and low temperature solder used in HVAC joints

model mfG chemical Promo No. No. composition Specifications Solidus liquidus Price 848-1090 SBSK 45% Ag ASTM B32 Sn 96, NSF 51, 430°F 430°F 37.95 96% Sn J-STD-006, Sn96Ag04A 221°C 221°C

er70s6 cArBon steel welding wires

Highest combination of manganese and silicone deoxidizers•Permits high current welding with CO• 2 gas shieldingGood for out-of-position welding using short circuiting transfer•Layer/level wound wire•Spool weight: 44 lbs./20 kg•Certified by CWB to CSA class W48 for ER49S6•Certified by AWS to class A5.18 for ER70S6•Sold per spool•

model Promo No. Diameter PriceNT560 0.035"/0.9 mm 59.95/SpoolNT561 0.045"/1.14 mm 55.95/Spool

e71t-1/1m All-position FluX-cored welding wires

Gas-shielded carbon steel wire for fabrication of mild and •low carbon steel; structural and pressure vessel gradesProvides optimum welding performance in argon/carbon •dioxide shielding gas, also formulated to perform very well with 100% C02

Formulated and manufactured to provide •consistent chemistry, steady arc, low spatter and an excellent bead appearanceSpool weight: 44 lbs.•Specification conformance: •AWS A5.20, ASME SFA 5.20 E71T-1/1M, CWB W48-06

model Promo No. Diameter" PriceTTU512 0.045 78.99/SpoolTTU537 0.052 79.99/SpoolTTU538 1/16 79.99/Spool

5

ezweld-cut electrodesSpecially designed electrodes for easy cutting, gouging, •chamfering and piercing all ferrous and non-ferrous metalsExcellent on AC welders•Easy striking and re-striking•No slag adherence to the base metal•Does not require any compressed air•Sold per tube•

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU612 EZ-CUT 3/32 x 14 120-225 13 27.95

ezweld-Alu electrodesArc welding electrodes for joining or •building up aluminum and aluminum alloysCrack resistance and porosity-free deposit•Good colour match and corrosion resistance•Stable arc in all positions•Easy to weld even on contaminated aluminum•Can be used with the torch for brazing•Sold per tube•

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU614 EZ-ALU.332 3/32 x 14 50-80 22 36.95TTU615 EZ-ALU 1/8 x 14 70-120 14 36.85

ezweld-cAst-99 electrodesHigh nickel-type electrodes for joining and building •up of grey, malleable and nodular cast ironExcellent machinability•Excellent on AC welders•All positions•Porosity-free deposit•Excellent for thin cast iron•Excellent for buttering before using •EZWELD-CAST 60 electrodesTensile strength: 50 000 PSI (350 MPa)•Hardness: 180 BHN •Sold per tube•

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU618 EZ-CAST99.332 3/32 x 14 50-80 21 77.95TTU619 EZ-CAST99.18 1/8 x 14 90-110 14 76.95

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU622 EZ-GO116 1/16 x 12 30-45 39 20.95TTU623 EZ-GO332 3/32 x 14 60-90 21 18.95

ezweld-go electrodesVersatile electrodes that are very easy to weld with•For the welding of all mild steel and galvanized steel•All position, including vertical down•Excellent on AC welders•Moisture-resistant and flexible coating•Easy striking and re-striking•Easy slag removal•Sold per tube•

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU616 EZ-CAST 3/32 x 14 50-80 21 55.90TTU617 EZ-CAST.18 1/8 x 14 90-110 14 54.95

ezweld-cAst-60 electrodesElectrodes for joining and build-up of grey, malleable, •nodular and cast iron subjected to various stressesRecommended for welding dissimilar •assemblies between cast iron and steelExcellent on dirty and oily cast iron •Allposition • ExcellentonACwelders•Crack-freedeposits • Easystrikingandre-striking•Hardly machinable deposits •AC/DC+ Tensile strength: 65 000 PSI (450 MPa)•Hardness: 200 BHN •Sold per tube•

model mfG Dimensions Electrodes Promo No. No. Dia." x l" Amperage /Tube PriceTTU613 EZ-ALS 3/32 x 14 60-75 19 46.95

ezweld-Als electrodesSuper strength electrodes for the welding of all high alloy steels, cast steel •and unknown steels, between themselves or for dissimilar assembliesOutstanding mechanical properties (120 000 PSI)•Corrosion, heat and oxidation resistant•Machinable, crack-free deposit•Can be used for build-up•Sold per tube•

6

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Output

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Input

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Input

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Output

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Input

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

CC

CV

DC

60Hz

3PHASE

1PHASE

2PHASE

6050Hz

AC

DC50Hz

AC

230V 120V

115V

Output

wire Feedtm 140 FluX-cored/mig wire Feed welder24-gauge to 5/16" recommended welding thickness.

INCludES:1-lb. spool of 0.035" NR-211-MP flux-cored wire•10' gun and cable assembly•10' work cable and clamp•Spare contact tips•Flux-cored nozzle•10' input cable with attached plug•Instruction manual•3-year warranty on parts and labour, •90 days on gun and cable assembly

PROCESSESFlux-cored welding - Steel•MIG welding - Steel (Optional shielding gas kit 331-4150 required)•MIG welding - Aluminum (Optional aluminum welding kit TTU575 required) •

model mfG Input Power rated output Dc Welding WfS Promo No. No. voltage/Phase/hertz current/voltage/Duty cycle output range IPm PriceTTU558 K2787-1 120/1/60 90 A/19 V/20% 30-140 A DC 50-300 659.99

wire Feedtm 180 FluX-cored/mig wire Feed welder24-gauge to 1/2" recommended welding thickness.

INCludES:1-lb. spool of 0.035" NR-211-MP flux-cored wire•10' gun and cable assembly•10' work cable and clamp•Spare contact tips•Flux-cored nozzle•10' input cable with attached plug•Instruction manual•3-year warranty on parts and labour, •90 days on gun and cable assembly

PROCESSESFlux-cored welding - Steel•MIG welding - Steel (Optional shielding gas kit 331-4150 required)•MIG welding - Aluminum (Optional aluminum welding kit TTU575 required)•

model mfG Input Power rated output Dc Welding WfS Promo No. No. voltage/Phase/hertz current/voltage/Duty cycle output range IPm PriceTTU559 K2788-1 208-230/1/60 208 V/130 A/20 V @ 25% 30-180 A DC 50-400 814.99 230 V/130 A/20 V @ 30%

wire Feedtm 255 FluX-cored/mig wire Feed welder24-gauge to 1/2" recommended welding thickness.

INCludES:15' • Magnum® 250-L gun and cable assembly with 0.035" contact tip10'workcableandclamp•0.045"sparecontacttip•MIGweldingnozzle•Adjustablegasregulatorandhose•Reel adapters for 2" and 3" wide 8" diameter spools•Accepts larger 33-lb. and 44-lb. spools of wire•10'inputcablewithattachedplug•Spoolgunready(OptionalkitTTU118)•Built-in thermal overload protection•Running gear with single cylinder rack integrated to base (maximum cylinder size 48")•Instruction manual •3-year warranty on parts and labour, 90 days on gun and cable assembly•

PROCESSESFlux-cored welding - Steel•MIG welding - Steel•MIG welding - Aluminum (Optional Magnum 100SG spool gun kit TTU118 required)•

model mfG Input Power rated output Dc Welding WfS Promo No. No. voltage/Phase/hertz current/voltage/Duty cycle output range IPm PriceTTU560 K2783-1 230/1/60 230 V/255 A/26.8 V @ 20% 30-255 A DC 50-700 1989.99 230 V/150 A/21.5 V @ 60% 230 V/120 A/20.0 V @ 100%

7

VAlVe Action® pAint mArKers

Ideal for all surfaces•Fast drying •Weather and fade resistant •Marking range: -50°F to 150°F•

model mfG Buy 12* No. No. colour & SAvE!PA418 096820 White 2.49/Ea.* PA419 096821 Yellow 2.49/Ea.*

163 series HAnd cutting torcH

Made from high-quality die-forged brass with •stainless steel tubes for strength and long lifeVictor• ® styleFeatures forged brass head, stainless •steel oxygen lever and tube mix designSmooth oxygen valve provides •precise oxygen flow controlSpiral gas mixer gives optimum •mix of oxygen and fuel14" cutting range•

model mfG head Promo No. No. Angle Price331-1205 163L-21 90º 249.95

eXcAliBur welding & cutting outFitHarris• ®SteelWorkerTMClassic compatibleDesigned for all trades•Welds up to 1/4" and •cuts up to 1"Includes• : Torch handle, cutting attachment, oxygen and acetylene regulators, cutting tip, mixer, welding elbows, 20' twin hoses, goggles, striker and plastic carrying case

model mfG Promo No. No. Price331-1885 4120 369.95

B pAintstiK® mArKers

All-purpose cold surface markers•Temperature range: -50° to 150°F•Marks on all materials, including •asphalt, aluminum, glass, plastic, marble, lumber and steel

model mfG Buy 12* No. No. colour & SAvE!PA298 080220 White 0.98/Ea.* PA309 080221 Yellow 0.98/Ea.*

tungsten electrodes7" standard length•Sold per package of 10•

2% tHoriAted Generally ground to a point, used on DCEN•

1.5% lAntHAnAtedLowest erosion rate with wide current range•Best DC arc starts and stability•

2% ceriAtedOperate successfully with AC or DC current•Non-radioactive•

zirconiAtedExcellent for AC welding due to the higher arc stability•Better arc starts and arc stability than pure tungsten•

pureGenerally used on •AC with high frequency

model mfG Promo No. No. Dia." colour Price

2% THORIATEd, EWTh-2NP544 T1167GT2 1/16 Red 10.95/Pkg.NP545 T3327GT2 3/32 Red 22.95/Pkg.NP543 T187GT2 1/8 Red 39.95/Pkg.

1.5% lANTHANATEd, EWla-1.5714-1200 T1167GL 1/16 Gold 10.95/Pkg.714-1205 T3327GL 3/32 Gold 24.95/Pkg.714-1210 T187GL 1/8 Gold 44.95/Pkg.

2% CERIATEd, EWCe-2NP549 T1167GC2 1/16 Grey 10.95/Pkg.NP550 T3327GC2 3/32 Grey 24.95/Pkg.NP551 T187GC2 1/8 Grey 44.95/Pkg.

ZIRCONIATEdNP546 T1167GZ 1/16 White 11.95/Pkg.NP547 T332TGZ 3/32 White 26.95/Pkg.NP553 T187GZ 1/8 White 47.95/Pkg.

PuRE, EWPNP540 T1167G 1/16 Green 10.95/Pkg.NP542 T3327G 3/32 Green 22.95/Pkg.NP541 T187GZ 1/8 Green 39.95/Pkg.

8

SAR314

welders doorAgsAthletic mesh lining to allow sweat •vapour to quickly evaporatePreshrunk and presoftened lightweight •fabric, flame-retardant until washedAir-cushioned front lining for •comfort and sweat absorbencyAssorted styles•One size fits all•Sold 12 per package•

Camo Wild SafariHappyHour Feast

FreeSpirit

model Promo No. colour/Style PriceNT835 Camo, Wild, Safari 52.95/Pkg.NT836 Happy Hour, Feast, Free Spirit 52.95/Pkg.NT837 Authentic Woodland Camo 57.95/Pkg.

sweAtBAndsField-tested to improve helmet grip •

with maximum perspiration absorptionMade of an absorbent air-cushioned •

layer lined with 10% fleece cottonComes with elastic strap•Sold two per package•

model BUy 12* No. & SAvE!SAM548 2.99/Pkg.*

SAR314

grAVitY Fed eYewAsHFDA approved 9-gallon high-density green polyethylene tank•Supplies a continuous flow of water for 15 minutes at 0.4 • GPMWide-fill opening with threaded cap•Easy-to-operate yellow activation arm•Light design and mounting bracket (included)•Includes:• One bottle of bacteriostatic additiveCSA certified to meet ANSI •Z358.1-2009 standard

model mfG Promo No. No. Description PriceSAR314 7501 Gravity Fed Eyewash 209.99 SAR315 9082 Bacteriostatic Water 64.95/case Additive, Four 8-oz. Bottles/Case

welding JAcKetsSuperior flame, heat and abrasion resistant•Select cowhide sleeves for heavy-duty •protection30" length jackets made of •blue 9-oz. Proban®FR7A® flame retardant cotton sateen 5-snap closure front and inside utility pocket•

model chest Promo No. Size measurements" PriceTTU364 Medium 40-42 39.99TTU365 Large 44-46 39.99TTU366 X-Large 48-50 39.99TTU367 2X-Large 52-54 44.99

leAtHer Knee pAdsTough abrasion-resistant leather•

Soft cushion back for comfort•Elastic straps with velcro closure•

Heat and fire resistant•Sold per pair•

model mfG Promo No. No. PriceSAL218 6991 27.95/Pr.

Burn First Aid KitContains first aid items for the immediate •treatment of minor (non-chemical) burns and scaldsSupplemental kit for industry, food vending trucks, schools, •restaurants, cafeterias, and other food preparation areas

model mfG Promo No. No. PriceSAY246 6991 54.99

9

premium QuAlitY welders' gloVes

Premium split cowhide leather construction •Excellent abrasion resistance•

Double thumb patch extends wear life•Full thermal cotton lining •

provides added heat protectionWelted seams at all critical points •

Sewn with • Kevlar® thread to avoid burning

model BUy 12* PAIrS No. & SAvE!SAN635 3.79/Pr.*

premium QuAlitY FoAm-lined welders' gloVes

Premium split cowhide •leather constructionExcellent abrasion resistance•Cotton covered foam lining •for superior heat protectionWelted seams at all critical points•Sewn with • Kevlar® thread to avoid burning

model BUy 12* PAIrS No. & SAvE!SAN277 3.99/Pr.*

pipeliner welding gloVesPremium split cowhide leather exterior construction•Full grain cowhide leather interior •provides incomparable comfortProtective leather patch •on back of left handExcellent abrasion resistance•Reinforced thumb extends wear life•Sewn with • Kevlar®thread to avoid burning

model BUy 6* PAIrS No. Size & SAvE!SAV008 Large 9.99/Pr.*

Bison tig welders' gloVesPremium construction •Unparalleled fit and dexterity •with exceptional durability Welted seams and straight •thumb for expert control 4" gauntlet cuff provides •superior protection More form fitting and has a greater •resistance to heat and flame than other leathers Kevlar• ® stitching improves seam strength and reduces seam burnoutDesigned for precision •welding applications

model Promo No. Size PriceTTU540 Medium 13.99/Pr. TTU541 Large 13.99/Pr. TTU542 X-Large 13.99/Pr.

HeAVY-dutY Bison welders' gloVes

Premium construction •with split leather palm

Unlined palm for increased •comfort and dexterity

Comfoflex• ®lining on back of hand for superior heat and sweat absorption

Fully welted • Kevlar®stitched seams6" gauntlet cuff for •

increased protection

model Promo No. Size PriceTTU543 Medium 21.99/Pr. TTU544 Large 21.99/Pr. TTU545 X-Large 21.99/Pr.

comFoFleX® premium QuAlitY welders' gloVes

Heat and flame resistant •shoulder split cowhide leatherFully sock lined for added comfort•Kevlar• ® stitched welted seams13 1/2" long with reinforced thumb•Meets CE standards •

model BUy 6* PAIrS No. Size & SAvE!610-0328 Large 6.08/Pr.*

10

cHArger rigHtcut cut-oFF wHeels tYpe 01

Durable zirconia alumina abrasive wheels•Good on a broad range •of materials, from alloys and stainless to grey ironUnique reinforcement •design provides safety, strength and straight cutExtra thin for a •quick cutting action

model mfG Dimensions max BUy 25* No. No. Dia." x T" x h" rPm & SAvE!NS200 66252826569 4 1/2 x 1/16 x 7/8 13 580 3.09/Ea.*NS201 66252826570 5 x 1/16 x 7/8 12 225 3.59/Ea.*

metAl grinding wHeels tYpe 27Quality aluminum oxide abrasive•Ideal for grinding alloys, •metals, steels and ferrous metals1/4" thick x 7/8" hub•

model mfG max BUy 10* No. No. Diameter" rPm & SAvE!NS130 07660775922 4 1/2 13 580 1.69/Ea.*NS132 07660775918 5 12 225 2.29/Ea.*NS134 07660775936 7 8600 3.29/Ea.*

gemini reinForced cut-oFF wHeels For cHop sAw

Long life, reinforced sides•Ideal for small cross-section work pieces, •resist breakage and provide straight cuts

7/64" thick x 1" hub hole•

model mfG max BUy 10* No. No. Diameter" rPm & SAvE!NS256 66253207554 12 5095 5.99/Ea.*NS259 66253306626 14 4365 7.99/Ea.*NS261 66253410198 16 3820 13.99/Ea.*

stAndArd twist Knot wire BrusHIndividual knot wire tufts of a knot wheel provide •minimal flexibility for more aggressive brushing actionAggressive, high impact action for severe application•To be used with straight grinders, •bench and pedestal grinder or right angle grinder

model mfG Brush Arbor Wire max Promo No. No. Dia." hole" Gauge" rPm PriceBX125 26017 4 3/8 0.014 20 000 18.99BX137 26047 6 5/8-11NC 0.025 9000 18.99BX144 26061 8 5/8 0.025 8500 34.99

zinc-ricH cold gAlVAnizing compound

97% pure zinc•Excellent anti-sag and anti-settling properties•Provides maximum protection to steel •exposed to severe environments16-oz. aerosol•

model mfG BUy 12* No. No. & SAvE!AA029 A00740 7.99/Ea.*

AA923

AA922

tApmAtic® edge luBeBiodegradable and water rinsable•Safe on all metals, extends •the life of cutting toolsAA922:• for use with band saw blades, grinding wheels and beltsAA923:• for use with tapping, forming, bending, pre-coating fasteners and lubricating rubber seals

model mfG Net Promo No. No. Description fill PriceAA922 C43200 Solid, Waxy Bar 13 oz (364 g) 17.99AA923 C43100 Creme 10 fl .oz. (0.296 L) 17.99

11

5" trigger switcH grinderNew powerful 10.5 A motor•11000RPM•5/8"-11spindle•Labyrinth construction seals motor •and bearings from contamination Motor winding protection •Includes:• Grip, lock nut wrench, wheel cover assy, inner flange, lock nut and removable side handle

model mfG Promo No. No. PriceTLZ330 GA5010 136.00

Air needle scAlerLightweight and compact with paddle style trigger•4000 BPM, 1/4"-18 NPT air inlet, 90 PSI•Low noise, low vibrations•Overall length: 16"•Includes:• 19 needles

model Promo No. PriceTLZ131 119.00

4 1/2" pAddle switcH smAll Angle grinder

10.0 A, 1250 MWO motor, 120 V•Debris baffles, protect internal components •4-vent multi-port exhaust system, reduces motor burn-up •25% longer lasting motor epoxy protection•3-position handle•Includes:• Side handle, 4 1/2" wheel, spanner wrench, contractor bag and a tool free burst resistant guard

18-gAuge sHeAr6.8 A • Milwaukee motor, trigger speed control: 0-2500 RPM spindle speed360° swivel head•Ergonomic tactile grip for optimal user comfort•10' flexible durable runner cord•Includes:• Hex wrench

model mfG Promo No. No. PriceTHZ879 6852-20 244.00

model mfG Promo No. No. PriceTLZ490 6148-30 114.95

14" cHop sAw15 A, 3.2 HP, 3900 RPM•5" pipe cutting capacity•Arm locks down •for portabilityIncludes:• Vise, abrasive wheel and hex wrench

HeAVY-dutY sAwzAll® sAw2800 SPM; 10 A; 3/4" stroke length•Adjustable pivot shoe•Keyless steel • Quick-Lok® blade clamp systemIncludes:• Two blades and carrying case

model mfG Promo No. No. PriceTJ143 6176-20 215.00

model mfG Promo No. No. PriceTEA178 6509-31 159.00

Pricing in effect until April 8, 2011 or while quantities last. Taxes and freight extra. Issue #SDm4516NA**DUE To cUrrENT mArkET flUcTUATIoNS, PrIcES mAy vAry WIThoUT PrIor NoTIcE.**

Model No. XA145Promo Price $109.00

Replacement bulbModel No. XC464Promo Price $2.59

crimped cup wHeel BrusHes

Designed for medium-duty •applications on a variety of high speed air and electric toolsRemoval of burrs, cleaning •flat or curved surfaces and welding cleanup

model mfG Arbor Wire max Promo No. No. Description Dia." hole Gauge rPm PriceBX547 32030 Steel 2 3/4 5/8-11NC 0.014 14 000 12.99BX574 32086 Stainless 2 3/4 5/8-11NC 0.014 14 000 19.99

NT645 NT687

welding HelmetsLightweight design with ratchet headwear•

Comes complete with shade 10 lens•Choice of 2" x 4 1/4" flip front •

or 4 1/2" x 5 1/4" wide vision fixed front

model Window Promo No. Description Dimensions" PriceNT645 Flip Front 2 x 4 1/4 11.99 NT687 Fixed Front 4 1/2 x 5 1/4 14.99

welding Hose reelsHeavy-duty, reinforced steel stampings for increased strength•1/4" oxygen and acetylene twin hose •with leakproof double O-ring sealsCompact design allows reels to fit in tight locations•Multi-position guide arms •for multiple mounting optionsKinkless, oil resistant, high quality hose•Spring rewind features long life •spring with declutching arbourOxygen inlet and outlet: •9/16" x 18 UNF (2B) (F) Acetylene inlet and outlet: •9/16" x 18 UNF (2B) (F) 300 maximum PSI•Durable, corrosion-resistant •powder coat paint finish

model hose Dimensions Promo No. length' W" x D" x h" PriceTLZ487 25 8 x 14 3/4 x 13 5/8 119.25TLZ488 50 8 5/8 x 20 1/2 x 20 1/2 145.50

weldsAFe® no. 447 Anti-FAtigue mAts

Designed specifically for welding•Repels sparks and hot metal shards•Buoyant sponge base alleviates leg and back stress•Bevelled edges and pebbled surface •for safety and extra traction9/16" overall thickness•3-year warranty•

model Dimensions Promo No. l' x W' PriceNG181 3 x 2 84.95NG182 5 x 3 217.95

HAnd-Held Flood ligHt w/mAgnet

500 W, weatherproof fixture•Comfortable foam grip•8', 16-gauge heavy-duty cord•Powerful 40-lb. pull strength •magnet quickly attaches to metal surfacesLights up to 5000 sq. ft.•Certified for sale in Canada by •an accredited certification body

model mfG Promo No. No. PriceXA145 BD-MAG 135.00

3/16" & 1/4" Hose repAir KitB-size kit offers 12 different •

items most frequently used for hose repair

Sold in a tough •polyethylene case that

identifies each fittingIncludes:• Crimping tool,

hose nuts and nipples, splicers, couplers

and ferrules

model mfG Promo No. No. PriceNP497 CK-24 79.99