Welding Joints. T-joint a right-angled joint, esp one in wood, making the shape of the letter T.
8
Welding Joints
-
Upload
evangeline-green -
Category
Documents
-
view
214 -
download
1
Transcript of Welding Joints. T-joint a right-angled joint, esp one in wood, making the shape of the letter T.
Welding Joints
T-jointa right-angled joint, esp one in wood, making the shape of the letter T
Lap jointa joint made with two pieces of metal, timber, etc., by halving the thickness of each member at the joint and fitting them together.
Butt joint a joint formed by two surfaces abutting at right angles.
welded together using oxygen acetylenea mixture of oxygen and acetylene, used in a blowtorch for cutting steel plates or the like.
Arc weldinga technique in which metals are welded using heat generated by an electric arc.
Mig. metal inert gas welding: a method of welding in which the filler metal wire supplies the electric current to maintain the arc, which is shielded from the access of air by an inert gas, usually argon.
Conclusion
• Oxygen and acetylene is used for thinner metals. Arc welding is for welding the thickest kinds of metal. Mig welding is used for anything in between.
![sms.math.nus.edu.sg...By (3), we have the relation cosA cosB cosC = 4~2 [5 2-(2R + r)]. Therefore ABC is an acute-angled triangle, a right-angled triangle, or an obtuse-angled triangle](https://static.fdocuments.us/doc/165x107/5eb289e00225fb34fd7f64c2/smsmathnusedusg-by-3-we-have-the-relation-cosa-cosb-cosc-42-5-2-2r.jpg)
