welding - Elliotts · 2016-02-01 · Unlined Part No. KCM10 Unlined Woven Kevlar® mitt felt back...

weldin

gA

pp

ar

el an

d wo

rk

sho

p

2

Care without Compromise

Elliotts is a successful manufacturer and supplier of quality safety gear throughout Australasian markets.

Our reputation for care has been built over nearly 50 years with a dynamic and positive spirit to do the right thing by our customers, sta˜ and industr y that sets us apart from others and drives us to deliver the most innovative safety and care products available. You can be completely conÿdent that everything carrying our name can be relied on to take care, because we have taken the care to get it right.

Our passion for quality and reliable service is matched by world class partnerships and a never-ending quest for the most innovative safety and care technologies available wherever they are and before you know you need them.

Elliotts quality Personal Protective Clothing (PPC) and Personal Protective Equipment (PPE) are proven on-the-job every day. They are speciÿed routinely for and by workers in metal, petrochemical, mining, emergency services, construction, and other industries where hazards exists.

These reliable and popular products are part of a comprehensive range evolved over time and based on the common foundation of quality and care for which the Elliotts has built its reputation.

Elliotts is a quality endorsed company with many of its products certiÿed to speciÿc standards applying to protective clothing and equipment. This means our customers are guaranteed superior product performance across our entire range. It also means that workers use our products with conÿdence and peace of mind.

Elliotts quality safety gear allows you to take care in any situation.

3Learn more about Elliotts Welding and Workshop Safety Gear at www.elliottsinternational.com

03 CONTENTS 04 ELLIOTTS QUALITY SAFETY GEAR RANGE

05 WELDING GLOVES09 PREMIUM WELDING GLOVES12 WELDING CLOTHING MATERIALS14 BIG RED® WELDING18 GOLDEN CHIEF® WELDING21 CHROME LEATHER WELDING

26 WAKATAC® WELDING30 HIGH VISIBILITY WELDING34 BLUE MAX® WELDING

38 ARCSAFE® WELDING SCREENS39 WELDING BLANKETS AND DRAPES

WELDINGGloves, Apparel AND WORKSHOP PROTECTION

4

Elliotts Quality Safety Gear Range

Range DetailsWelding and Workshop Protection

Elliotts have led the way in protective clothing for welders, we have been at it for nearly 50 years. Elliotts offers an extensive range of welding garments made from various materials to take care of welders in all kinds of situations. Whether you are stick, MIG or TIG welding, working outdoors, indoors, or in confined a space, we have the protection you need. Our range includes welding jackets, coats, trousers, sleeves, hoods, knee pads, leggings and spats made from all kinds of leathers and FR Cottons or combinations of both. Elliotts Welding Clothing includes: Big Red®: Premium Heavy Duty Big Red Cow Split Leather, Golden Chief®: Premium Medium Duty Pig Split Leather, Chrome Leather: Hard Working and durable cow split leather, WAKATAC® Proban®: Premium medium duty FR Cotton, Blue Max® FR Cotton: Hard Working medium duty FR Cotton.

Specialist Protective Clothing

Welding and Workshop Protection

Gloves and Hand Protection

General Protective Clothing and Workwear

Specialist Safety Clothing and Apparel

• Tecasafe® Plus FR Workwear• ArcSafe Switching Apparel• Structural Firefighting Clothing• Wildland Firefighting Clothing• ONESuit Hazmat Suits

• Welding Gloves• Welding Screens• Welding Blankets and Drapes• Welding Frames• BIG Red® Premium Leather Welding

• Welding Gloves• Mec-Flex MEchanics Gloves• G-Flex Technical Gloves• Cut Resistant Gloves• Chemical Gloves

• Wet Weather Clothing• Cold Weather Clothing• Sun & Heat Protection• Chainsaw Clothing• Cooling Clothing

• Specialist Safety Googles• Anti-Fog Safety Googles• Chemical Safety Googles• Safe Glasses• Sunglass Style Safety Glasses

• High Visibility

• Riggers Gloves• General Purpose Gloves• Cold & Freezer Gloves• Arm guards and wrist protection

• Chemical Splash Protection• ArcSafe FR Wet Weather Clothing• FR Antistatic Wet Weather Clothing

• GOLDEN CHIEF® Premium Leather Welding Clothing• WAKATAC® Proban Welding Clothing• BLUE MAX® FR Cotton Welding Clothing

Learn more about Elliotts Welding and Workshop Safety Gear at www.elliottsinternational.com


Elliotts Quality Safety Gear Range

Range DetailsWelding and Workshop Protection

Elliotts have led the way in protective clothing for welders, we have been at it for nearly 50 years. Elliotts offers an extensive range of welding garments made from various materials to take care of welders in all kinds of situations. Whether you are stick, MIG or TIG welding, working outdoors, indoors, or in confined a space, we have the protection you need. Our range includes welding jackets, coats, trousers, sleeves, hoods, knee pads, leggings and spats made from all kinds of leathers and FR Cottons or combinations of both. Elliotts Welding Clothing includes: Big Red®: Premium Heavy Duty Big Red Cow Split Leather, Golden Chief®: Premium Medium Duty Pig Split Leather, Chrome Leather: Hard Working and durable cow split leather, WAKATAC® Proban®: Premium medium duty FR Cotton, Blue Max® FR Cotton: Hard Working medium duty FR Cotton.

Specialist Protective Clothing

Welding and Workshop Protection

Gloves and Hand Protection

General Protective Clothing and Workwear

Specialist Safety Clothing and Apparel

• Tecasafe® Plus FR Workwear• ArcSafe Switching Apparel• Structural Firefighting Clothing• Wildland Firefighting Clothing• ONESuit Hazmat Suits

• Welding Gloves• Welding Screens• Welding Blankets and Drapes• Welding Frames• BIG Red® Premium Leather Welding

• Welding Gloves• Mec-Flex MEchanics Gloves• G-Flex Technical Gloves• Cut Resistant Gloves• Chemical Gloves

• Wet Weather Clothing• Cold Weather Clothing• Sun & Heat Protection• Chainsaw Clothing• Cooling Clothing

• Specialist Safety Googles• Anti-Fog Safety Googles• Chemical Safety Googles• Safe Glasses• Sunglass Style Safety Glasses

• High Visibility

• Riggers Gloves• General Purpose Gloves• Cold & Freezer Gloves• Arm guards and wrist protection

• Chemical Splash Protection• ArcSafe FR Wet Weather Clothing• FR Antistatic Wet Weather Clothing

• GOLDEN CHIEF® Premium Leather Welding Clothing• WAKATAC® Proban Welding Clothing• BLUE MAX® FR Cotton Welding Clothing

Learn more about Elliotts Welding and Workshop Safety Gear at www.elliottsinternational.com

CertifiedWeldingGloves Elliotts have lead the way in hand protection for welders. The BIG RED® and KEVLAR® BLUE continue to set the standard for welding gloves. Elliotts welding gloves are well known for the highest quality and protection for stick, MIG or TIG welding

Certified Protection

The BIG RED® and KEVLAR® BLUE are the only gloves in the world independently certified by SAI Global to AS/NZS 2161.4:1999 Occupational protective gloves - Protection against thermal risks (heat and fire).

AS/NZS2161.4:1999Lic# SMKH22088

6

Certified by SAI Global to AS/NZS 2161.4.1999Occupational Gloves for protection against thermal risks (heat and fire)

CERTIFICATIONS & STANDARDS


EN38

8

EN40

7

413133 3243

Abrasion resistanceBlade cut resistanceTear resistancePucture resistance

Burning behaviourContact heatConvective heatRadiant heatSmall splashes of molten metalLarge quantities of molten metal

AS/N

ZS 2

161.

4

AS/N

ZS 2

161.

3

AS/NZS2161.4:1999Lic# SMKH22088

EN38

8

EN40

7

413133 3243


Burning behaviourContact heatConvective heatRadiant heatSmall splashes of molten metalLarge quantities of molten metal

AS/N

ZS 2

161.

4

AS/N

ZS 2

161.

3

AS/NZS2161.4:1999Lic# SMKH22088

Certified by SAI Global to AS/NZS 2161.4.1999Occupational Gloves for protection against thermal risks (heat and fire)

BIG RED®

WELDING GLOVES®SPart No. 300FLWKT Sizes: S-2XLPart No. 300FLWKTXT Sizes: L■ Quality Grade A Butt Leather ■ Cotton fabric lining■ Welted seams for added glove life■ Reinforced palm, thumb & knuckle guard■ Big Red® 406 mm long■ Big Red® XT 680 mm long

KEVLAR® BLUEWELDING GLOVES

Part No. 300RKB Sizes: LPart No. 300RKBXT Sizes: L■ Quality Grade A Butt Leather ■ Cotton fabric lining■ Welted seams for added glove life■ Reinforced palm, thumb & knuckle guard■ Kevlar Blue® 406 mm long■ Kevlar Blue XT® 680 mm long


04



EN38

8

3143


AS/N

ZS 2

161.

3

EN38

8

4243


AS/N

ZS 2

161.

3

WEL

DIN

G G

LOV

ES

WEL

DIN

G G

LOV

ES

WAKATAC®

WELDING GLOVESPart No. 300WAK Size: L■ Select Red Butt Leather ■ Cotton fabric lining■ Welted seams for added glove life■ WAKATAC® 406 mm long

LEFTIES®

WELDING GLOVESPart No. 4062LHO Size: L■ Two Fully Lined Left Handed Gloves■ Quality Green Butt Leather■ Cotton fabric lining■ Welted seams for added glove life■ LEFTIES® 406 mm long

8

EN38

8

2132


AS/N

ZS 2

161.

3 CERTIFICATIONS & STANDARDS:

AS/NZS 2161.3 / EN388

EN38

8

2132


AS/N

ZS 2

161.

3 CERTIFICATIONS & STANDARDS:

AS/NZS 2161.3 / EN388

EN38

8

2123


AS/N

ZS 2

161.

3

CERTIFICATIONS & STANDARDS:

AS/NZS 2161.3 / EN388

TIGMATE® XT WELDING GLOVES

WESTERN RIGGER WELDER®

WELDING GLOVES

Part No. TIG11 Sizes: S-XL■ Quality Soft Grain Leather■ Unlined for dexterity & soft touch■ Short Cuff - 279 mm long

Part No. TIG16 Sizes: S-XL■ Quality Soft Grain Leather■ Unlined for dexterity & soft touch■ Long Cuff - 406 mm long

G

Part No. 500XTWRL Sizes: S-2XL■ Quality Cow Grain Leather■ Generous hand sizing■ Welding or Rigger / Drivers safety Glove■ Long Cuff 330 mm long

TIGMATE®

WELDING GLOVES

__________________________________________________


■ Part No. KGS10■ Fully woven Kevlar® gloves saver (each)■ Ambidextrous

■ Unlined■

■ Part No. KCM10■ Unlined■ Woven Kevlar® mitt felt back■ Loop pile Kevlar® felt back

■ Part No. KMLFW18FK 457mm■ Part No. KMLFW12FK 304mm■ Fully woven Kevlar® palm, back and cuff■ Fully wool lined■ Ambidextrous

■ Part No. KGLP18 457 mm■ Part No. KGLP12 304 mm■ Loop pile Kevlar® glove■ Fully wool lined

FULLY WOVEN KEVLAR® MITT

■ Part No. KGL12FK 304mm■ Part No. KGL18FK 457mm■ Woven Kevlar® palm with Kevlar® felt back and cuff■ Fully wool lined

WOVEN / FELT KEVLAR® GLOVE

LOOP PILE KEVLAR® GLOVE■ Part No. KMLP18 457 mm■ Part No. KMLP12 304 mm■ Loop pile Kevlar® mitt■ Fully wool lined■ Ambidextrous

LOOP PILE KEVLAR® MITT

■ Part No. KGLFW18FK 457mm■ Part No. KGLFW12FK 304mm■ Fully woven Kevlar® palm, back and cuff ■ Fully wool lined

FULLY WOVEN KEVLAR® GLOVE

GLOVE SAVER

COVER MITT

■ Part No. KML12FK 304mm■ Part No. KML18FK 457mm■ Woven Kevlar® palm with Kevlar® felt back and cuff■ Fully wool lined

WOVEN / FELT KEVLAR® MITT

KEVLAR® CONTACT HEAT GLOVES

■ 250mm long

10 04

Part No. AKG16WS Sizes: L■ Aluminised Kevlar® back

■ Chrome Leather palm and cuff■ Designed for protection from high radiant heat as encountered in flux core welding■ Thermal lining■ Length 406mm

Part No. APG16WSK Sizes: L■ Aluminised Preox back■ Pyrocore heat treated leather palm cuff■ Ideal for foundry use where hot metal contact is experienced■ Thermal lining■ Length 406mm

Part No. AKG16WSK Sizes: L■ Aluminised Kevlar® back

■ Kevlar® palm and cuff■ Applications include handling of molten metalladles where protection from contact and radiant heat is required ■ Designed for high temperature contact■ Thermal lining■ Length 406mm

CHROME LEATHERRADIANT HEAT PROTECTION GLOVES

PYROCORE LEATHERRADIANT HEAT PROTECTION GLOVES

KEVLAR®RADIANT HEAT PROTECTION GLOVES

Different palm materials include Chrome Leather, Pyrocore Leather, and Kevlar® combined with a fully aluminised back, fully insulated lining and wear seams welted for extra strength to provide the protection for hazardous areas.

RADIANT HEAT GLOVES

Part No. APG16WS Sizes: L■ Aluminised Preox back

Part No. APG16WSK Sizes: L■ Aluminised Preox back

11Learn more about Elliotts Welding and Workshop Safety Gear at www.elliottsinternational.com04

Part No. AKG16WS Sizes: L■ Aluminised Kevlar® back

■ Chrome Leather palm and cuff■ Designed for protection from high radiant heat as encountered in flux core welding■ Thermal lining■ Length 406mm

Part No. APG16WSK Sizes: L■ Aluminised Preox back■ Pyrocore heat treated leather palm cuff■ Ideal for foundry use where hot metal contact is experienced■ Thermal lining■ Length 406mm

Part No. AKG16WSK Sizes: L■ Aluminised Kevlar® back

■ Kevlar® palm and cuff■ Applications include handling of molten metalladles where protection from contact and radiant heat is required ■ Designed for high temperature contact■ Thermal lining■ Length 406mm

CHROME LEATHERRADIANT HEAT PROTECTION GLOVES

PYROCORE LEATHERRADIANT HEAT PROTECTION GLOVES

KEVLAR®RADIANT HEAT PROTECTION GLOVES

Different palm materials include Chrome Leather, Pyrocore Leather, and Kevlar® combined with a fully aluminised back, fully insulated lining and wear seams welted for extra strength to provide the protection for hazardous areas.

RADIANT HEAT GLOVES

Part No. APG16WS Sizes: L■ Aluminised Preox back

Part No. APG16WSK Sizes: L■ Aluminised Preox back

Part No. HSM16WL■ Non-asbestos E-glass fibre■ 406mm long■ Fabric working temperature 500 °C■ Thickness of 2.2mm■ Mitts are lined to give greater thermal protection■ Wear seams welted in leather■ Ambidextrous mitt

Part No. TM16WL■ Wool-lined, ambidextrous mitt■ 406mm long■ Non-asbestos glass fibre■ Fabric working temperature 800 °C■ Thickness of 2.2mm■ Mitts are lined to give greater thermal protection■ Wear seams welted in leather

Part No. TCM10■ Ambidextrous and unlined mitt■ Non-asbestos glass fibre■ Fabric working temperature 800 °C■ Thickness of 2.2mm■ Wear seams welted in leather■ 230mm long

HEAT PROTECTIVE MITTS– HEATSHIELD®

HEAT PROTECTION MITTS–T1000®

HEAT PROTECTION MITTST1000® COVER MITT

Elliott Australia offers mitts manufactured from two types of E Glass fabrics.

Heatshield® is manufactured from E Glass fibre which is a non-combustible, flexible, inorganic material that has been specifically designed to provide retention of heat. Heatshield has service temperature of 550°C with a 100% duty cycle providing a wide scope, fulfilling most applications. T1000® is an E Glass fabric with a Vermicu-lite treatment to enable the fabric to withstand surface temperatures of 800°C continuously. Lining: mitts are usually lined with wool to offer greater thermal protection.

Property EN 407 Requirements TM16WL HSM16WL

5.3Convective Heat

5.4Radiant Heat

Level: 4Result: HTI=39

Level: 2Result: t3=44s

Level: 4Result: HTI=39

Level: 2Result: t3=43s

Level HTI1 < 42 < 73 < 104 < 18 Level t31 < 5s2 < 30s3 < 90s4 < 150s

__________________________________________________

CONTACT HEAT MITTS

Test Data [EN407]

Not all fabric test information was available at time of printing. As more Test Data becomes available our web site will be updated. Information on each of the following tests is available at www.elliottsinternational.com

12

Welding protective clothing is manufactured using either leather or flame retarded cotton materials. Elliotts range of welding apparel is available in four types of materials:

BIG RED®

All BIG RED® leather welding apparel has been made using the famous BIG RED® Leather. BIG RED® Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. All BIG RED® leather welding apparel seams are lock stitched and sewn with DuPont KEVLAR® thread for extra durabilty and strength. Where necesary heavy wear seams are welted for additional durability. For heavy-duty welding protection BIG RED® continues to set the standard of high quality, long lasting products in the industry.

LEATHER For heavy duty welding protection leather is the most effective material. Leather is long lasting, durable and cost effective. Elliott Welding Apparel uses several leathers including Big Red Cow Split Leather, Golden Chief Pig Skin Leather and Chrome Cow Split Leather.

Flame Retarded(FR) CottonFor lighter welding protection or where high temperatures and or humidity are a workplace hazard Flame Resistant (FR) cotton garments are ideal. Elliott FR Cotton welding clothing excel in the crucial areas of flame resistance, thermal protection, comfort and durability. Elliott FR Cotton Welding Apparel is manufactured using Proban, WAKATAC® Proban and FR Cotton.

Flame ResisTance

PROBAN® is a flame retardant solution that provides peace of mind to both industrial and consumer markets. Developed to give cotton and cotton rich fabrics reliable flame retardant proper-ties that meet industry fire regulations. PROBAN® fabrics are durable to modern day conditions. WAKATAC® Proban® WAKATAC® Welding Apparelis the leading brand of FR Cotton Welding Apparel. Utilising the unique WAKATAC® PROBAN® and ergonomic designs,comfort and protection is guaranteed. The range ofWAKATAC® Welding Apparel includes, jackets, jackets with leather sleeves, jackets with safety harness access point, hoods, sleeves and trousers.

FR Cotton and Leather ComboThe WAKATAC® and BLUE MAX® ranges include jackets where we combine FR Cotton and leather. We utilise the leather in the sleeves which is the area that normally wears out first. It is a winning combination of performance and comfort.

Elliotts Proban® and

BLUE MAX® The range of PROBAN® Welding Apparel includes hoods and neck flaps and the BLUE MAX® range includes jackets and hoods.For more jackets and other garments please see our WAKATAC® range.

Tailored SolutionsAs we are the manufacturer, we can also

develop solutions tailored to meet your specific needs. Just call us!

Chrome Leather Elliotts classic chrome leather offers a good balance of durability, abrasion resistance and pliability.This value for money leather offers good comfort levels and good overall performance.

GOLDEN CHIEF®All GOLDEN CHIEF® leather welding apparel has been made using carefully selected GOLDEN CHIEF® Leather. GOLDEN CHIEF® Pig Skin Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. Pig skin leather is a lighter weight compared to traditional cow split leather. Pig Skin is known for its resilience, holding up well against abrasion, staying pliable with wear, and better withstanding

stiffening after exposure to moisture. Pig Skin offers the greatest

breathability due tothe porous texture of this hide and becomes softer

with use. All GOLDEN CHIEF®

leather welding apparel seams are

lock stitched and sewn with DuPontKEVLAR® thread for extra durabilty

and strength. For heavy-duty

welding protection GOLDEN CHIEF® sets

a high standard for style and protection.

WELDING CLOTHING MATERIALS


Welding protective clothing is manufactured using either leather or flame retarded cotton materials. Elliotts range of welding apparel is available in four types of materials:

BIG RED®

All BIG RED® leather welding apparel has been made using the famous BIG RED® Leather. BIG RED® Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. All BIG RED® leather welding apparel seams are lock stitched and sewn with DuPont KEVLAR® thread for extra durabilty and strength. Where necesary heavy wear seams are welted for additional durability. For heavy-duty welding protection BIG RED® continues to set the standard of high quality, long lasting products in the industry.

LEATHER For heavy duty welding protection leather is the most effective material. Leather is long lasting, durable and cost effective. Elliott Welding Apparel uses several leathers including Big Red Cow Split Leather, Golden Chief Pig Skin Leather and Chrome Cow Split Leather.

Flame Retarded(FR) CottonFor lighter welding protection or where high temperatures and or humidity are a workplace hazard Flame Resistant (FR) cotton garments are ideal. Elliott FR Cotton welding clothing excel in the crucial areas of flame resistance, thermal protection, comfort and durability. Elliott FR Cotton Welding Apparel is manufactured using Proban, WAKATAC® Proban and FR Cotton.

Flame ResisTance

PROBAN® is a flame retardant solution that provides peace of mind to both industrial and consumer markets. Developed to give cotton and cotton rich fabrics reliable flame retardant proper-ties that meet industry fire regulations. PROBAN® fabrics are durable to modern day conditions. WAKATAC® Proban® WAKATAC® Welding Apparelis the leading brand of FR Cotton Welding Apparel. Utilising the unique WAKATAC® PROBAN® and ergonomic designs,comfort and protection is guaranteed. The range ofWAKATAC® Welding Apparel includes, jackets, jackets with leather sleeves, jackets with safety harness access point, hoods, sleeves and trousers.

FR Cotton and Leather ComboThe WAKATAC® and BLUE MAX® ranges include jackets where we combine FR Cotton and leather. We utilise the leather in the sleeves which is the area that normally wears out first. It is a winning combination of performance and comfort.

Elliotts Proban® and

BLUE MAX® The range of PROBAN® Welding Apparel includes hoods and neck flaps and the BLUE MAX® range includes jackets and hoods.For more jackets and other garments please see our WAKATAC® range.

Tailored SolutionsAs we are the manufacturer, we can also

develop solutions tailored to meet your specific needs. Just call us!

Chrome Leather Elliotts classic chrome leather offers a good balance of durability, abrasion resistance and pliability.This value for money leather offers good comfort levels and good overall performance.

GOLDEN CHIEF®All GOLDEN CHIEF® leather welding apparel has been made using carefully selected GOLDEN CHIEF® Leather. GOLDEN CHIEF® Pig Skin Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. Pig skin leather is a lighter weight compared to traditional cow split leather. Pig Skin is known for its resilience, holding up well against abrasion, staying pliable with wear, and better withstanding

stiffening after exposure to moisture. Pig Skin offers the greatest

breathability due tothe porous texture of this hide and becomes softer

with use. All GOLDEN CHIEF®

leather welding apparel seams are

lock stitched and sewn with DuPontKEVLAR® thread for extra durabilty

and strength. For heavy-duty

welding protection GOLDEN CHIEF® sets

a high standard for style and protection.

WELDING CLOTHING MATERIALS

14

All BIG RED® leather welding apparel has been made using the famous BIG RED® Leather. BIG RED® Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts.

All BIG RED® leather welding apparel seams are lock stitched and sewn with DuPont KEVLAR® thread for extra durability and strength. Where necessary heavy wear seams are welted for additional durability.

For heavy-duty welding protection BIG RED® continues to set the standard of high quality, long lasting products in the industry.


THE BIG RED®

HIGH VISIBILITY WELDERS JACKET

THE BIG RED®

WELDERS SLEEVES WITH YOKE

The BIG RED® Welders Jacket has been designed with an extended back for additional protection, especially if you are bending over to access a difficult weld. The front closure is "off centre" away from high wear areas where it does not get in your way.

Part No. BRC30 Size: S-4XL■ Big Red® selected leather■ Welted seams for extra strength■ Longer length at the back for extra protection■ Velcro® side closure■ Leather/Velcro® cuff tabs

Been seen and be safer wearing the High Visibility Big Red Welders Jacket. All the features of the BIG RED® jacket with the addition of high wearing 3M reflective trim conforms to AS/NZS 4602.1:2011 High visibility safety garments – Garments for high risk applications night time only requirements

Part No. BRC30T1 Sizes: S-4XL■ Big Red® selected leather■ 3M Reflective Trim for night time high visibility ■ Welted seams for extra strength■ Longer length at the back for extra protection■ Velcro® side closure■ Leather/Velcro® cuff tabs.

The BIG RED® Welders Sleeves are designed to give you protection for your arms and shoulders and is ideal for lighter welding or for very hot conditions. Ideal when worn with the BIG RED® Apron.

Part No. BRSWY Sizes: One Size Fits All■ Leather/Velcro® cuff tabs■ Welted seams for extra strength■ Big Red® selected leather

THE BIG RED® WELDERS JACKET

__________________________________________________

16

The BIG RED® Seatless trousers are designed to be worn over your work trousers and for when heavy duty leg protection is required. The design is seatless to keep you cooler, more comfortable, and for greater movement.

Part No. BRT30 Sizes: S-2XL■ Big Red® selected leather■ Seatless design for comfort and coolness■ Waist belt and buckle■ Comfortable to fit over normal work clothes■ Heavy duty protection from dross and spatter

THE BIG RED®

BIB STYLE APRON

THE BIG RED®

LEGGINGS

The BIG RED® Apron manufactured from soft, premium selected butt BIG RED® Leather, includes leather straps for additional durability, adjustable for the perfect fit.

Part No. BRAA2LS■ Big Red® selected leather■ Bib style■ Leather straps and buckles■ Size 914mm x 559mm

Part No. BR400CC■ Big Red® selected leather■ Quick release Velcro® closure■ 3 cane supports■ 50mm elastic top■ Fibre board toe guard■ Chain under boot

THE BIG RED® WELDERS TROUSERS


The BIG RED® Seatless trousers are designed to be worn over your work trousers and for when heavy duty leg protection is required. The design is seatless to keep you cooler, more comfortable, and for greater movement.

Part No. BRT30 Sizes: S-2XL■ Big Red® selected leather■ Seatless design for comfort and coolness■ Waist belt and buckle■ Comfortable to fit over normal work clothes■ Heavy duty protection from dross and spatter

THE BIG RED®

BIB STYLE APRON

THE BIG RED®

LEGGINGS

The BIG RED® Apron manufactured from soft, premium selected butt BIG RED® Leather, includes leather straps for additional durability, adjustable for the perfect fit.

Part No. BRAA2LS■ Big Red® selected leather■ Bib style■ Leather straps and buckles■ Size 914mm x 559mm

Part No. BR400CC■ Big Red® selected leather■ Quick release Velcro® closure■ 3 cane supports■ 50mm elastic top■ Fibre board toe guard■ Chain under boot

THE BIG RED® WELDERS TROUSERS

The BIG RED® Welders Cap with nape keeps welding spatter and dross off your head and stops it going down the back of your jacket. Designed to be worn under your welding helmet. Durable, quality head and neck protection.

Part No. BRCWC1 - without napePart No. BRCNP9 - with 228mm nape■ Big Red® selected leather■ Available with or without nape■ All edges bound■ Head and neck protection

THE BIG RED®

WELDING HELMET NAPE

THE BIG RED®

CONFINED SPACE WELDING HOOD AND HELMET

The BIG RED® Welding Helmet Nape is designed to be attached to your welding helmet. The conscertina design folds up easily and neatly at the top of your head as you raise your helmet. Providing excellent head and neck protection that is attached to your welding helmet.

Part No. BRN20■ Big Red® selected leather■ Self stick Velcro® attachment to welding helmet■ Registered design which does not impede lifting and lowering of helmet■ Head and neck protection

The BIG RED® Confined space welding hood includes a welding helmet with the chin section removed. Designed to be worn in tight and confined spaces where you have very little room to move.

Part No. BRH29C■ Big Red® selected leather■ Complete with welding helmet■ Self stick Velcro® attachment around lens area

.

THE BIG RED® Welders Cap with Nape

__________________________________________________

18

All GOLDEN CHIEF® leather welding apparel has been made using carefully selected GOLDEN CHIEF® Leather.

GOLDEN CHIEF® Pig Skin Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. Pig Skin leather is lighter weight compared to traditional cow split leather. Pig Skin is known for its resilience, holding up well against abrasion, staying pliable-with wear, and better withstanding stiffening after exposure to moisture. Pig Skin offers the greatest breathability due to the porous texture of its hide which also becomes softer with use.

All GOLDEN CHIEF® leather welding apparel seams are lock stitched and sewn with DuPont KEVLAR® thread for extra durabilty and strength. For medium to heavy-duty welding protection GOLDEN CHIEF® sets a high standard for style and protection.


All GOLDEN CHIEF® leather welding apparel has been made using carefully selected GOLDEN CHIEF® Leather.

GOLDEN CHIEF® Pig Skin Leather is chrome tanned to assure softness and durability while resisting heat, sparks, slag and cuts. Pig Skin leather is lighter weight compared to traditional cow split leather. Pig Skin is known for its resilience, holding up well against abrasion, staying pliable-with wear, and better withstanding stiffening after exposure to moisture. Pig Skin offers the greatest breathability due to the porous texture of its hide which also becomes softer with use.

All GOLDEN CHIEF® leather welding apparel seams are lock stitched and sewn with DuPont KEVLAR® thread for extra durabilty and strength. For medium to heavy-duty welding protection GOLDEN CHIEF® sets a high standard for style and protection.

GOLDEN CHIEF®

WELDING JACKET

GOLDEN CHIEF®

WELDING JACKET WITH REMOVABLE APRON

The GOLDEN CHIEF® premium leather welders jacket is made from selected soft, premium GOLDEN CHIEF® pig split leather. The jacket has an inside breast pocket, lined collar, sleeve pen pocket, adjustable press stud wrist closure, full press stud front closure and side adjusters. All seams are sewn with heat resistant Kevlar® thread.

Part No. GC30 SIZES: S-4XL■ Premium gold pig split leather■ Lightweight and extremely durable■ Press stud closure■ Corduroy-lined collar■ Inside pocket■ Press stud adjustable cuffs■ Sleeve pen pockets■ Press stud side adjusters for snug fit■ Riveted reinforced wear areas

The GOLDEN CHIEF® Welding Jacket with removable apron offers flexible protection great for hot and humid conditions where full back protec-tion is not required. Made from selected soft, premium GOLDEN CHIEF® pig split leather, the short jacket has an open back with a de-tachable apron at the front. Fully lined collar, sleeve pen pocket, adjustable press stud wrist closure, press stud front closure and press stud attachable apron. All seams are sewn with heat resistant Kevlar® thread.

Part No. GCWSA Sizes: S-4XL■ Premium gold pig split leather■ Lightweight and extremely durable■ Press stud closure■ Corduroy-lined collar■ Press stud adjustable cuffs■ Sleeve pen pockets■ Press stud attachable apron

20

GOLDEN CHIEF® SPATS

GOLDEN CHIEF® SLEEVES

The GOLDEN CHIEF® Welding Apron is manufactured from selected soft, premium GOLDEN CHIEF® pig split leather and included adjustable webbing straps and front pocket. All seams are sewn with heat resistant Kevlar® thread.

Part No. GCA2■ Premium gold pig split leather■ Lightweight and extremely durable■ Size 910mm x 600mm■ Webbing straps and quick release buckles■ Front pocket■ Riveted reinforced wear areas■ Two front D-rings for gear attachment

The GOLDEN CHIEF® Welding Spats are designed to protect your boots from damaging welding spatter and dross. The Spats are manufactured from selected soft, premium GOLDEN CHIEF® pig split leather, utilise a 50mm Velcro closure with all wear areas reinforced with rivetts. All seams are sewn with heat resistant Kevlar® thread.

Part No. GCSWS■ Big Red® selected leather■ Premium gold pig split leather■ Lightweight and extremely durable■ 50mm Velcro® closure■ Velcro® boot strap■ Riveted reinforced wear areas■ Double leather molded toe area

The GOLDEN CHIEF® Welding Sleeves are perfect for that light welding situation where only arm protection is required. Stay cool and protected. The sleeves are manufactured from selected soft, premium GOLDEN CHIEF® pig split leather, are attached with an adjustable webbing strap and are sewn with heat resistant Kevlar® thread

Part No. GCWS10■ Premium gold pig split leather■ Lightweight and extremely durable■ Webbing straps and quick release buckles

GOLDEN CHIEF® APRON

__________________________________________________


cHROMELEATHERElliotts classic chrome leather offers a good balance of durability, abrasion resistance and pliability. This value for money leather offers good comfort levels and good overall performance.

Our Chrome Leather range is one of the most comprehensive ranges available for welders. We protect all parts of your body with various hoods, caps and napes, jackets, sleeves, trousers and chaps, knee pads and spats and leggings.

22

BOLERO

SLEEVES WITH YOKE

Part No. CW128 SIZES: S-4XL■ Heavy duty protection from dross and spatter■ Sized to fit over normal work clothes■ Chrome leather■ Press stud closure■ Stand-up collar

Part No. JW4 SIZES: S-4XL■ Chrome leather■ Press stud closure■ Stand up collar■ Sized to fit over normal work clothes■ Chest length■ Heavy duty protection from dross and spatter

Part No. CW10 - without yokePart No. CW10WY - with yoke■ Chrome leather■ Shoulder length■ Complete with front and back yokes■ Collar and press stud fastening

JACKET


BOLERO

SLEEVES WITH YOKE

Part No. CW128 SIZES: S-4XL■ Heavy duty protection from dross and spatter■ Sized to fit over normal work clothes■ Chrome leather■ Press stud closure■ Stand-up collar

Part No. JW4 SIZES: S-4XL■ Chrome leather■ Press stud closure■ Stand up collar■ Sized to fit over normal work clothes■ Chest length■ Heavy duty protection from dross and spatter

Part No. CW10 - without yokePart No. CW10WY - with yoke■ Chrome leather■ Shoulder length■ Complete with front and back yokes■ Collar and press stud fastening

JACKET

__________________________________________________

Elliott leggings are designed to not only protect yourboots but also your lower leg from spatter and dross.Elliott’s leggings are made from selected chromeleather with other options including closure systemsand supports.

Part No. WL16■ Strap & buckle closure under boots■ Strap & buckle rear closure■ Length 406mm■ Riveted reinforced stress points

CHROME LEATHER LEGGINGS

CHROME LEATHER LEGGINGS

Part No. ES16Q■ Velcro® quick release losure■ Strap and buckle closures under boots■ Length 406mm■ Riveted reinforced stress points

3 QUICK RELEASE VELCRO®

Part No. WL16CRQ■ Heavy duty insert■ Strap and buckle closures under boots■ Length 406mm■ Riveted reinforced stress points

QUICK RELEASE PRESS STUD CLOSURE

Part No. WL400CC■ Heavy duty insert■ 50mm elastic top■ Fibre board toe guard■ Chain under boots■ Riveted reinforced stress points■ Length 400mm

QUICK RELEASE PRESS STUD CLOSURE

Part No. SWS7SV■ Velcro® closure■ Length 230mm

Part No. WS7VWP■ Velcro® closure■ Length 230mm

UNSUPPORTED

SUPPORTED

Part No. SWS7SBC■ Strap and buckle closure■ Length 230mm

Part No. WS7SB■ Strap and buckle closure■ Length 230mm

UNSUPPORTED

SUPPORTED

CHROME LEATHER SPATSOffers ankle and foot protection from spatter and dross.Elliott Australia’s spats are made from selectedchrome leather with a choice of either leather strapand buckle or Velcro® closures. • All spats have a leather strap for closure under the boot for a snug fit and extra durability • If extra support is required, selected spats have supports on either side of the leg • Total length 230mm

24

AA004

A1

A4

AA003

WAIST STYLE APRON

KNEE PADS

■ Webbing or leather straps■ Chrome leather or heavy duty grain hide

Part No. Length Width StrapsA1 1066mm 609mm WebbingA2 914mm 559mm WebbingA1LS 1066mm 609mm LeatherA2LS 914mm 599mm LeatherAA004 914mm 599mm Grain Leather

■ Webbing or leather straps■ Chrome leather or heavy duty grain leather

Part No. Length Width StrapsA4 609mm 609mm WebbingA4LS 609mm 609mm LeatherAA003 609mm 609mm Grain Leather

Part No. KP10SB■ Leather strap & buckle closure■ 50mm high density foam

Part No. KP10■ Elastic/Velcro® closure■ Chrome leather■ 50mm high density foam

Part No. KP5 (Economy style)■ Elastic/Velcro® closure■ 50mm foam

BIB STYLE APRON

__________________________________________________


Part No. CTP10V■ Chrome leather welders bib■ Self stick velcro for attachment to welder’s helmet

WELDERS HOOD

WELDERS BIB

Part No.WC1 Without Nape WC1NP9 228mm Nape ■ Chrome leather■ With or without nape■ Protects head and neck from spatter and dross

Part No. HSP16L■ Chrome leather hood with shoulder gussets, press stud closure under chin.

WELDERS CAP

Part No. CT2 Sizes: M-2XL■ Chrome leather■ Full seat■ Waist belt and buckle■ Comfortable fit over normal work clothes■ Heavy duty protection from dross and spatter

TROUSER

Part No. CT10 Sizes: M-3XL■ Chrome leather■ Seatless, full front■ Waist belt and buckle■ Comfortable to fit over normal work clothes■ Heavy duty protection from dross and spatter

SEATLESS TROUSER

__________________________________________________

26

WAKATACWAKATAC® Welding Apparel is the leading brand of FR Cotton Welding Apparel. Utilising the unique WAKATAC Proban® and ergonomic designs, comfort and protection is guaranteed. The WAKATAC® range of Proban® Welding Apparel is focused on providing light-weight, cool and comfortable protection for welders. The WAKATAC® Proban® is ideal for lighter welding applications and where hot and humid conditions can cause heat stress. The extensive range covers most kinds of welding operations even when high visibility is a priority or even when working at heights and you need to wear a safety harness. Proban® FR Cotton Protection

The WAKATAC® range of Welding apparel is made from Proban Flame Retardant Cotton. PROBAN® is a flame retardant solution that provides peace of mind to both industrial and consumer markets.

®


WAKATAC® JACKET WITH REFLECTIVE TRIM

WAKATAC® JACKET WITH CHROME LEATHER SLEEVES

The WAKATAC® welding jacket is made completely of WAKATAC® Proban®. This jacket is the lightest in the WAKATAC® range and is the coolest and most comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30 Sizes: S-4XL■ Full Proban® protection■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight cool & washable

The WAKATAC® T1 welding jacket is made completely of WAKATAC® Proban® with the addition of 3M 8935 FR Silver Reflective Trim offering additional Night Time high visibility protection. This jacket is the lightest in the High Visibility WAKATAC® range and is the coolest and most comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30T1 Sizes: S-4XL■ Reflective trim for added visibility■ Full Proban® protection■ Longer length at the back for extra protection

The WAKATAC® CS welding jacket is made of WAKATAC® Proban® in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The WAKATAC® CS jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30CS Sizes: S-4XL■ Proban® front and back protection■ Chrome leather sleeves■ Longer length at the back for extra protection

WAKATAC®

JACKET

■ Velcro® side closure■ Light weight and cool■ Extra durability in sleeves

__________________________________________________

28


WAKATAC®

JACKET WITH CHROME LEATHER SLEEVES AND REFLECTIVE TRIM

WAKATAC®

PROBAN SLEEVES

The WAKATAC® CS welding jacket is made of WAKATAC® Proban® in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The jacket is designed to be worn over a safety harness and includes an access point on the rear of the jacket where a lanyard can be attached. The WAKATAC® CS jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30CSH Sizes: S-4XL■ Rear opening for harness lanyard■ Flap with Velcro® closure■ Proban® front and back protection■ Chrome leather sleeves

The WAKATAC® CS welding jacket is made of WAKATAC® Proban® in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The addition of 3M 8935 FR Silver Reflective Trim offers additional Night Time high visibility protection The WAKATAC® CS jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30CST1 Sizes: S-4XL■ Reflective trim for added visibility■ Proban® front and back protection■ Chrome leather sleeves■ Longer length at the back for extra protection

.

The WAKATAC® Sleeves are great for small light welding applications. Combine them with an apron for additional body protection.

Part No. WAK10■ Full length■ Adjustable leather straps and buckle■ Cool arm protection

WAKATAC® JACKET WITH HARNESS ACCESSIBILITY

■ Velcro® side closure■ Light weight and cool■ Extra durability in sleeves■ Longer length at the back for extra protection

__________________________________________________


WAKATAC® TROUSER

WAKATAC® PROBAN® CAPS

The WAKATAC® Hood is designed to be worn underneath your welding helmet. The side gussets help it sit over your shoulders providing full head and shoulder protection. The shoulder length also stops debris falling down the back of your collar and provides full neck protection.

Part No. WAKPHGM30■ Side gussets for a more comfortable fit■ Edges fully bound■ Draw string face closure for better protection

The WAKATAC® Trousers are designed to provide protection for your lower body/ leg area. They are designed with additional room to be worn over work trousers.

Part No. WAK69 Sizes: S-3XL■ Full Proban® protection■ Elastic waist

WAKATAC® Proban Welding Caps are designed to be worn underneath your welding helmet. The cap offers you protection for the top and sides of your head while the nape provides protection for the rear of your neck and stops debris entering your jacket.

Part No. WAKPWC6 - cap only■ All edges fully bound■ Cool lightweight head protection

Part No. WAKPWC6NP - with nape■ 152mm nape■ All edges fully bound■ Cool lightweight head and neck protection

WAKATAC®

PROBAN® HOOD

__________________________________________________

30

HIGHVISIBILITYWELDINGWelders are regularly exposed to the hazards of moving traffic or moving plant or equipment on work sites and where required must conform to the mandatory requirements for high visibility clothing.

Adding an additional high visibility garment such as a vest over a welding jacket is not a suitable solution as it can be lost, is harder to enforce and most importantly can potentially ignite as the majority of high visibility fabrics are highly flammable. Elliotts range of High Visibility Welding jackets solves that problem. One garment gives the protection you need from the hazards of welding but also provides you with day or day/ night high visibility protection.

The High Vis Range is made from Proban® and is ideal for light to medium welding protection or where high temperatures, heat stress and or humidity are a workplace hazard. Proban® Welding Apparel is focused on providing light-weight, cool and comfortable protection for welders.

AS/NZS4602.1:2011Lic# SMKH22088


All Elliotts High Visibility Welding Jackets are Certified by SAI Global to AS/NZS AS/NZS 4602.1:2011 High visibility safety garments Part 1: Garments for high risk


■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight and cool■ Extra durability in sleeves

HIVIS JACKET WITH CHROME LEATHER SLEEVES

HIVIS JACKET WITH CHROME LEATHER SLEEVES AND HARNESS ACCESSIBILITY

The OPWJ30 welding jacket is made completely of High Visibility Orange Proban® FR Cotton. This jacket is the lightest in the range and is the coolest and most comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Only Requirements.

Part No. OPWJ30 Sizes: S-4XL■ Full Proban® protection■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight cool & washable

The OPWJ30CS welding jacket is made of High Visibility Orange Proban® FR Cotton in the body section and Chrome Leather on the sleeves which offers additional protection and durability. This jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Only Requirements.

Part No. OPWJ30CS Sizes: S-4XL■ Reflective trim for added visibility■ Full Proban® protection■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight cool & washable

The OPWJ30CSH welding jacket is made of High Visibility Orange Proban® FR Cotton in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The jacket is designed to be worn over a safety harness and includes an access point on the rear of the jacket where a lanyard can be attached. The jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Only Requirements.

Part No. OPWJ30CSH Sizes: S-4XL■ Rear opening for harness lanyard■ Flap with velcro closure■ Proban® front and back protection■ Chrome leather sleeves

HIVISHIGH VISIBILITY WELDERS JACKET

High Visibility Day Only

HIGHVISIBILITYWELDINGWelders are regularly exposed to the hazards of moving traffic or moving plant or equipment on work sites and where required must conform to the mandatory requirements for high visibility clothing.

Adding an additional high visibility garment such as a vest over a welding jacket is not a suitable solution as it can be lost, is harder to enforce and most importantly can potentially ignite as the majority of high visibility fabrics are highly flammable. Elliotts range of High Visibility Welding jackets solves that problem. One garment gives the protection you need from the hazards of welding but also provides you with day or day/ night high visibility protection.

The High Vis Range is made from Proban® and is ideal for light to medium welding protection or where high temperatures, heat stress and or humidity are a workplace hazard. Proban® Welding Apparel is focused on providing light-weight, cool and comfortable protection for welders.

AS/NZS4602.1:2011Lic# SMKH22088


All Elliotts High Visibility Welding Jackets are Certified by SAI Global to AS/NZS AS/NZS 4602.1:2011 High visibility safety garments Part 1: Garments for high risk

32

■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight and cool■ Extra durability in sleeves

HIVIS JACKET WITH CHROME LEATHER SLEEVES

HIVIS JACKET WITH CHROME LEATHER SLEEVES, REFLECTIVE TRIM, & HARNESS ACCESSIBILITY

The OPWJ30T1 welding jacket is made completely of High Visibility Orange Proban® FR Cotton with the addition of 3M 8935 FR Silver Reflective Trim offering additional Night Time high visibility protection. This jacket is the lightest in the High Visibility range and is the coolest and most comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Night Requirements.

Part No. OPWJ30T1 Sizes: S-4XL■ Reflective trim for added visibility ■ Velcro® side closure■ Full Proban® protection ■ Light weight cool & washable■ Longer length at the back for extra protection

The OPWJ30CST1 welding jacket is made of High Visibility Orange Proban® FR Cotton in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The addition of 3M 8935 FR Silver Reflective Trim offers additional Night Time high visibility protection. This jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Night Requirements.

Part No. OPWJ30CST1 Sizes: S-4XL■ Reflective trim for added visibility■ Proban® front and back protection■ Chrome leather sleeves■ Longer length at the back for extra protection

The OPWJ30CSHT1 welding jacket is made of High Visibility Orange Proban® FR Cotton in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The addition of 3M 8935 FR Silver Reflective Trim offers additional Night Time high visibility protection. The jacket is designed to be worn over a safety harness and includes an access point on the rear of the jacket where a lanyard can be attached. The jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over. This garment is certified to AS/NZS 4602.1:2011 High Visibility Safety Garments – Day Night Requirements.

Part No. OPWJ30CSHT1 Sizes: S-4XL■ Rear opening for harness lanyard■ Flap with velcro closure■ Proban® front and back protection■ Chrome leather sleeves

HIVISHIGH VISIBILITY WELDERS JACKET

High Visibility Day/Night


__________________________________________________


Been seen and be safer wearing the High Visibility Big Red® Welders Jacket. All the features of the BIG RED® jacket with the addition of high wearing 3M reflective trim conforming to AS/NZS 4602.1:2011 High visibility safety garments – Garments for high risk applications

Part No. BRC30T1 Sizes: S-4XL■ Big Red® selected leather■ 3M Reflective Trim for night time high visibility ■ Welted seams for extra strength■ Longer length at the back for extra protection■ Velcro® side closure■ Leather/Velcro® cuff tabs.

The WAKATAC® T1 welding jacket is made completely of WAKATAC® Proban® with the addition of 3M 8935 FR Silver Reflective Trim offering additional night time high visibility protection. This jacket is the lightest in the High Visibility WAKATAC® range and is the coolest and most comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30T1 Sizes: S-4XL■ Reflective trim for added visibility■ Full Proban® protection■ Longer length at the back for extra protection■ Velcro® side closure■ Light weight cool & washable


The WAKATAC® CS welding jacket is made of WAKATAC® Proban® in the body section and Chrome Leather on the sleeves which offers additional protection and durability. The addition of 3M 8935 FR Silver Reflective Trim offers additional night time high visibility protection The WAKATAC® CS jacket offers a great balance of comfort and protection with extra durability in the sleeves. The front Velcro® closure makes it easy to fasten and the extended back offers additional protection when bending over.

Part No. WAKPJ30CST1 Sizes: S-4XL■ Reflective trim for added visibility■ Proban® front and back protection■ Chrome leather sleeves■ Longer length at the back for extra protection

.

WAKATAC® JACKET WITH REFLECTIVE TRIM

WAKATAC®

JACKET WITH CHROME LEATHER SLEEVES AND REFLECTIVE TRIM

THE BIG RED®

HIGH VISIBILITY WELDERS JACKET

__________________________________________________

High Visibility Night Only

34

The BLUE MAX® range of welding apparel is made from a Flame Retardant (FR) Cotton. BLUE MAX® is ideal for light to medium welding protection or where high temperatures and or humidity are a workplace hazard.

The BLUE MAX® FR Cotton is focused on providing light-weight, cool and comfortable protection for welders. The BLUE MAX® range includes a full FR Cotton Jacket and hood and also a FR Cotton Leather sleeve combo jacket.

__________________________________________________


BLUE MAX® JACKET

BLUE MAX®

PROBAN® HOOD

The BLUE MAX® welding jacket is made of Royal Blue FR Cotton. This jacket is lightweight, cool and comfortable to wear in hot and humid conditions. The front Velcro® closure makes it easy to fasten, side adjusters and sleeve tabs help create a snug custom fit.

Part No. NPWJ30 Sizes: S-4XL■ Full FR Cotton protection■ Velcro® front closure■ Side adjusters for snug fit■ Sleeve tabs for cuff closure making it easier to pull on your gloves

The BLUE MAX® welding jacket is made of Royal Blue FR Cotton and gold coloured chrome leather sleeves offering extra durability in the areas that wear out from welding spatter and dross. The front Velcro® closure makes it easy to fasten, side Adjusters and sleeve tabs help create a snug custom fit.

Part No. NPWJ30CS Sizes: S-4XL ■ Front and back FR Cotton protection ■ Gold chrome leather sleeves■ Velcro® front closure■ Side adjusters for snug fit■ Sleeve tabs for cuff closure making it easier to pull on your gloves

The BLUE MAX® Hood is designed to be worn underneath your welding helmet. The side gussets help it sit over your shoulders providing full head and shoulder protection. The shoulder length also stops debris falling down the back of your collar and provides full neck protection.

Part No. PHGM30B■ Side gussets for a more comfortable fit.■ Edges fully bound■ Draw string face closure for close seal and better protection.

BLUE MAX®

JACKET WITH YELLOW SLEEVES

__________________________________________________

The BLUE MAX® range of welding apparel is made from a Flame Retardant (FR) Cotton. BLUE MAX® is ideal for light to medium welding protection or where high temperatures and or humidity are a workplace hazard.

The BLUE MAX® FR Cotton is focused on providing light-weight, cool and comfortable protection for welders. The BLUE MAX® range includes a full FR Cotton Jacket and hood and also a FR Cotton Leather sleeve combo jacket.

__________________________________________________

36

Part No. PH25CSY■ Extra length to cover chest and back■ Draw string face closure for extra protection

BIBS

HOOD - EXTRA LENGTH

Part No. PWC6Y No neck flap PWC6NPY With 152mm nape■ Full Proban® protection with or without neck flap

Part No. NPB30■ Full Proban® protection■ Self stick Velcro® for attachment to welding helmet

CAPS

Part No. PHIS101Y■ Economy (no side gussets)PHGM30Y■ Draw string face closure for extra protection■ Side gussets for a more comfortable fit

HOOD

Part No. PBNF23Y■ Full Proban® protection■ Self stick Velcro® for attachment to safety cap or hat

NECK FLAPS

Medium Duty Proban®

__________________________________________________


WO

RKSH

OP

Part No. PH25CSY■ Extra length to cover chest and back■ Draw string face closure for extra protection

BIBS

HOOD - EXTRA LENGTH

Part No. PWC6Y No neck flap PWC6NPY With 152mm nape■ Full Proban® protection with or without neck flap

Part No. NPB30■ Full Proban® protection■ Self stick Velcro® for attachment to welding helmet

CAPS

Part No. PHIS101Y■ Economy (no side gussets)PHGM30Y■ Draw string face closure for extra protection■ Side gussets for a more comfortable fit

HOOD

Part No. PBNF23Y■ Full Proban® protection■ Self stick Velcro® for attachment to safety cap or hat

NECK FLAPS

Medium Duty Proban®

__________________________________________________

38

WELDING SCREENSHow does it work?

The ArcSafe® welding screen is manufactured from vinyl film, processed with a colour dye, a flame retardant and an ultra violet absorber. The dye consumes and filters the blue light brightness associated with the electric arc welding process. The material surface acts as a reflector, causing the arc to appear larger and less bright, thus reducing glare to the eyes. The light is also scattered in different directions, creating a fluorescent light. This causes the pupil to constrict and shut out excess glare, thus reducing light to the retina. Colours and Luminance Transmittance

ArcSafe® welding screens are available in three colours: Red, Green and Amber. The Luminance Transmittance is the ratio of the luminance of a source of light when viewed through a curtain or screen, to the luminance of that source when viewed directly.

Benefits of ArcSafe®

ArcSafe® welding screens absorb the dangerous ultra violet light that is emitted from the arc welding process and also offers these added benefits:

■ Surrounding your welding situations with safety■ Protecting your co-workers and other people from the painful effects of accidental welding flash■ Safely and quickly defining hazardous welding areas■ Allowing safe observation for safety check of welding operations■ All seams are welded, not sewn, for extra durability and strength

Category Min. % Max. % ArcSafe®

C1 17.8 29.1 C2 8.5 17.8 C3 3.2 8.5 Red & AmberC4 1.2 3.2 C5 0.44 1.2 Green

Protect this most precious gift from the painful and harmful effects of welding flash with

Elliott ArcSafe® welding screens.

Certified Product

Provide the best protection for your workplace as well as your business. Elliott Australia’s welding screens ensure you are covered as they are the only welding screens certified to Australian Standards. Check your current welding screens and ensure you are protected.

Product Certified: Elliott ArcSafe® Welding Screens are product certified to AS 3957 - 1991 NZ 5852 - 1991 Light transmitting 64 screens and curtains for welding operations.

RED GREEN AMBER


WELDING SCREENSHow does it work?

The ArcSafe® welding screen is manufactured from vinyl film, processed with a colour dye, a flame retardant and an ultra violet absorber. The dye consumes and filters the blue light brightness associated with the electric arc welding process. The material surface acts as a reflector, causing the arc to appear larger and less bright, thus reducing glare to the eyes. The light is also scattered in different directions, creating a fluorescent light. This causes the pupil to constrict and shut out excess glare, thus reducing light to the retina. Colours and Luminance Transmittance

ArcSafe® welding screens are available in three colours: Red, Green and Amber. The Luminance Transmittance is the ratio of the luminance of a source of light when viewed through a curtain or screen, to the luminance of that source when viewed directly.

Benefits of ArcSafe®

ArcSafe® welding screens absorb the dangerous ultra violet light that is emitted from the arc welding process and also offers these added benefits:

■ Surrounding your welding situations with safety■ Protecting your co-workers and other people from the painful effects of accidental welding flash■ Safely and quickly defining hazardous welding areas■ Allowing safe observation for safety check of welding operations■ All seams are welded, not sewn, for extra durability and strength

Category Min. % Max. % ArcSafe®

C1 17.8 29.1 C2 8.5 17.8 C3 3.2 8.5 Red & AmberC4 1.2 3.2 C5 0.44 1.2 Green

Protect this most precious gift from the painful and harmful effects of welding flash with

Elliott ArcSafe® welding screens.

Certified Product

Provide the best protection for your workplace as well as your business. Elliott Australia’s welding screens ensure you are covered as they are the only welding screens certified to Australian Standards. Check your current welding screens and ensure you are protected.

Product Certified: Elliott ArcSafe® Welding Screens are product certified to AS 3957 - 1991 NZ 5852 - 1991 Light transmitting 64 screens and curtains for welding operations.

RED GREEN AMBER

Width Drop Part No. Red Part No. Green Part No. Amber1300mm 1800mm STS1813R STS1813G STS1813A1800mm 1800mm STS1818R STS1818G STS1818A2000mm 1800mm STS1820R STS1820G STS1820A2600mm 1800mm STS1826R STS1826G STS1826A3900mm 1800mm STS1839R STS1839G STS1839A4500mm 1800mm STS1845R STS1845G STS1845A5200mm 1800mm STS1852R STS1852G STS1852A

WELDING SCREEN -

Elliott recognises the need for not only standard sizes but also the need for screens in specific sizes, no matter how large or small.

Special sizes available on request

Part No. Width Drop GFP48 1200mm 1800mm GFP72 1800mm 1800mm

FLAME RETARDED CANVAS SCREENS

■ Cost effective robust flame retarded screens. ■ Ideal as a non-translucent barrier between work areas or passage ways ■ Ideal as a barrier from sparks generated from grinding or cutting

Special sizes available by request.Available by the roll on request.

__________________________________________________

*Frames not included

40

WELDING BANKETHEATSHIELD®

WELDING BLANKETT1000®

Part No Width DropT100063 900mm 1800mmT100066 1800mm 1800mm

Part No. Width DropHSB63 900mm 1800mmHSB66 1800mm 1800mm



T1000® is also manufactured from E Glass Fibre which is a non-combustible, flexible, inorganic material that has been treated to withstand higher temperatures than HeatShield®. T1000® has been developed to provide a blanket fabric that will be unaffected by surface temperatures of 800°C continuously.

■ Continuous working temperature: 800°C ■ Thickness 2.2mm ■ Weight 1150g/m2

HeatShield® is manufactured from E Glass fibre which is a non- combustible, flexible, inorganic material that has been specifically designed to provide retention of heat. HeatShield® has a service temperature of 500ºC with a 100% duty cycle providing a wide scope, while fulfilling most applications. ■ Continuous working temperature: 500°C ■ Thickness 2.2mm ■ Weight 1150g/m2

__________________________________________________

WELDING BLANKETS AND DRAPESWHAT IS THE DIFFERENCEElliotts have an extensive range of products manufactured from high temperature resistant fabrics designed to protect workers, plant and equipment from the hazards associated with welding and fabrication processes.

WELDING BLANKETS

A Welding Blanket is designed to encapsulate a metal object that has been subjected to heat treatment either through stress relieving or welding. The blanket retards the cooling rates contributing towards the non hardening and possible subsequent embrittlement in the Heat Effected Zone (HEZ). Elliotts offers blankets manufactured from two fabrics, HeatShield® and T1000®.

WELDING DRAPES

A Welding Blanket is designed to be placed over or cover an object that cannot be moved and is positioned in such a way that welding spatter and dross could cause damage. The positioning of the drape is of utmost importance. It should be arranged loosely over the object to enhance the run off of welding spatter and dross. A welding drape can also be used as a curtain or screen where a more robust material is required.Elliotts welding drapes are available in leather, NeoWeld® and SilicaGlass

?


WELDING BANKETHEATSHIELD®

WELDING BLANKETT1000®

Part No Width DropT100063 900mm 1800mmT100066 1800mm 1800mm

Part No. Width DropHSB63 900mm 1800mmHSB66 1800mm 1800mm



T1000® is also manufactured from E Glass Fibre which is a non-combustible, flexible, inorganic material that has been treated to withstand higher temperatures than HeatShield®. T1000® has been developed to provide a blanket fabric that will be unaffected by surface temperatures of 800°C continuously.

■ Continuous working temperature: 800°C ■ Thickness 2.2mm ■ Weight 1150g/m2

HeatShield® is manufactured from E Glass fibre which is a non- combustible, flexible, inorganic material that has been specifically designed to provide retention of heat. HeatShield® has a service temperature of 500ºC with a 100% duty cycle providing a wide scope, while fulfilling most applications. ■ Continuous working temperature: 500°C ■ Thickness 2.2mm ■ Weight 1150g/m2

__________________________________________________

WELDING BLANKETS AND DRAPESWHAT IS THE DIFFERENCEElliotts have an extensive range of products manufactured from high temperature resistant fabrics designed to protect workers, plant and equipment from the hazards associated with welding and fabrication processes.

WELDING BLANKETS

A Welding Blanket is designed to encapsulate a metal object that has been subjected to heat treatment either through stress relieving or welding. The blanket retards the cooling rates contributing towards the non hardening and possible subsequent embrittlement in the Heat Effected Zone (HEZ). Elliotts offers blankets manufactured from two fabrics, HeatShield® and T1000®.

WELDING DRAPES

A Welding Blanket is designed to be placed over or cover an object that cannot be moved and is positioned in such a way that welding spatter and dross could cause damage. The positioning of the drape is of utmost importance. It should be arranged loosely over the object to enhance the run off of welding spatter and dross. A welding drape can also be used as a curtain or screen where a more robust material is required.Elliotts welding drapes are available in leather, NeoWeld® and SilicaGlass

? WELDING DRAPESNEOWELD®

WELDING DRAPESLEATHER

WELDING DRAPESSILICAGLASS

Part No. Width Drop NWB63 900mm 1800mmNWB66 1700mm 1800mmSpecial sizes available by request.Available by the roll on request.

NeoWeld® is Elliott Australia’s most popular fabric used in welding drapes. NeoWeld® is an E-Glass fabric coated in flame retarded neoprene which provides a slick surface to enable the weld spatter and dross to cascade away.Specifications: ■ Continuous working temperature 260°C ■ Thickness 1.2mm ■ Weight 1000g/m2

Part No. Width Drop SG0303 300mm 300mmSG117 900mm 1800mmSG1817 1700mm 1800mm


A SilicaGlass drape can be confidently used for protection of sensitive areas. A premium product with a silica content of 96%, producing a crystalline crust when exposed to a neutral oxy-acetylene flame as used in the auto repair industry.

Specifications: ■ Continuous working temperature 1000°C ■ Thickness 1.2mm ■ Weight 1000g/m2

A leather drape manufactured from selected chrome split leather is Elliott Australia’s economical robust, all purpose drape.

Specifications ■ Continuous working temperature 80ºC ■ Thickness 1.2mm

Part No. Width Drop CLD189 900mm 1800mmCLD1818 1800mm 1800mm

Special sizes available by request.

__________________________________________________

42

䔀氀氀椀漀琀琀猀䌀甀猀琀漀洀攀爀匀攀爀瘀椀挀攀䘀漀爀渀攀愀爀氀礀㔀　礀攀愀爀猀Ⰰ 䔀氀氀椀漀琀琀猀栀愀猀戀攀攀渀挀漀洀洀椀琀琀攀搀琀漀洀愀渀甀昀愀挀琀甀爀椀渀最Ⰰ 搀椀猀琀爀椀戀甀琀椀渀最Ⰰ 愀渀搀猀甀瀀瀀漀爀琀椀渀最眀漀爀氀搀ⴀ挀氀愀猀猀焀甀愀氀椀琀礀猀愀昀攀琀礀最攀愀爀⸀ 圀攀ᤠ瘀攀戀甀椀氀琀愀爀攀猀瀀攀挀琀攀搀愀渀搀攀砀瀀攀爀椀攀渀挀攀搀琀攀愀洀愀挀爀漀猀猀漀甀爀栀攀愀搀漀昀昀椀挀攀Ⰰ 洀愀渀甀昀愀挀琀甀爀椀渀最愀渀搀搀椀猀琀爀椀戀甀琀椀漀渀漀瀀攀爀愀琀椀漀渀猀眀椀琀栀椀渀搀甀猀琀爀礀眀椀搀攀欀渀漀眀氀攀搀最攀愀渀搀猀甀瀀瀀漀爀琀攀搀戀礀琀栀攀戀攀猀琀椀渀昀漀爀洀愀琀椀漀渀愀渀搀猀礀猀琀攀洀猀琀漀攀渀猀甀爀攀琀栀攀瘀攀爀礀栀椀最栀攀猀琀猀琀愀渀搀愀爀搀猀漀昀愀搀瘀椀挀攀愀渀搀猀攀爀瘀椀挀攀⸀

吀栀攀䔀氀氀椀漀琀琀猀䌀甀猀琀漀洀攀爀匀攀爀瘀椀挀攀倀爀漀洀椀猀攀猀吀栀攀䔀氀氀椀漀琀琀猀䌀甀猀琀漀洀攀爀匀攀爀瘀椀挀攀倀爀漀洀椀猀攀猀

圀攀琀漀氀椀猀琀攀渀琀漀漀甀爀挀甀猀琀漀洀攀爀猀琀漀攀渀猀甀爀攀眀攀甀渀搀攀爀猀琀愀渀搀琀栀攀椀爀爀攀焀甀椀爀攀洀攀渀琀猀⸀

圀攀椀渀愀挀挀甀爀愀琀攀氀礀瀀爀漀挀攀猀猀椀渀最漀甀爀漀爀搀攀爀猀琀漀攀渀猀甀爀攀漀甀爀挀甀猀琀漀洀攀爀猀爀攀挀椀攀瘀攀眀栀愀琀琀栀攀礀眀愀渀琀Ⰰ 眀栀攀渀琀栀攀礀眀愀渀琀椀琀⸀

圀攀椀渀漀昀昀攀爀椀渀最愀氀琀攀爀渀愀琀椀瘀攀猀 ☀ 猀漀氀甀琀椀漀渀猀⸀

圀圀攀琀漀戀攀愀挀挀漀洀漀搀愀琀椀渀最愀渀搀攀愀猀礀琀漀搀漀⸀

䔀氀氀椀漀琀琀猀䌀甀猀琀漀洀攀爀匀攀爀瘀椀挀攀椀猀琀爀甀猀琀攀搀眀椀琀栀愀猀猀椀猀琀椀渀最礀漀甀椀渀昀椀渀搀椀渀最琀栀攀戀攀猀琀猀愀昀攀琀礀瀀爀漀搀甀挀琀昀漀爀礀漀甀爀戀甀猀椀渀攀猀猀愀渀搀愀猀猀椀猀琀椀渀最椀渀攀瘀攀爀礀猀琀攀瀀漀昀琀栀攀瀀甀爀挀栀愀猀椀渀最愀渀搀瀀爀漀挀甀爀攀洀攀渀琀瀀爀漀挀攀猀猀⸀

䌀甀猀琀漀洀椀猀攀搀儀甀愀氀椀琀礀匀愀昀攀琀礀䜀攀愀爀䔀氀氀椀漀琀琀猀洀愀渀甀昀愀挀琀甀爀椀渀最愀渀搀搀攀猀椀最渀琀攀愀洀愀爀攀挀漀渀猀琀愀渀琀氀礀眀漀爀欀椀渀最漀渀甀瀀搀愀琀椀渀最愀渀搀椀洀瀀爀漀瘀椀渀最漀甀爀焀甀愀氀椀琀礀猀愀昀攀琀礀最攀愀爀⸀ 䴀愀渀礀漀昀漀甀爀挀氀椀攀渀琀猀甀猀攀漀甀爀琀攀愀洀琀漀挀爀攀愀琀攀挀甀猀琀漀洀椀猀攀搀猀愀昀攀琀礀愀瀀瀀愀爀攀氀琀漀猀甀椀琀琀栀攀椀爀椀渀搀椀瘀椀搀甀愀氀爀攀焀甀椀爀攀洀攀渀琀猀昀漀爀琀栀攀洀愀渀礀椀渀搀甀猀琀爀椀攀猀琀栀愀琀漀甀爀猀愀昀攀琀礀最攀愀爀瀀爀漀琀攀挀琀猀⸀

䄀氀琀攀爀渀愀琀攀氀礀Ⰰ 眀攀挀愀渀挀爀攀愀琀攀愀渀攀眀最愀爀洀攀渀琀搀攀猀椀最渀攀搀昀爀漀洀琀栀攀最爀漀甀渀搀甀瀀昀爀漀洀漀甀爀氀愀爀最攀爀愀渀最攀漀昀猀愀昀攀琀礀昀愀戀爀椀挀猀Ⰰ 挀漀渀猀琀爀甀挀琀椀漀渀猀礀猀琀攀洀猀愀渀搀愀瀀瀀愀爀攀氀搀攀猀椀最渀攀搀昀漀爀礀漀甀爀猀瀀攀挀椀昀椀挀眀漀爀欀攀渀瘀椀爀漀渀洀攀渀琀愀渀搀瀀爀漀樀攀挀琀琀愀猀欀猀⸀

圀椀琀栀漀甀爀猀琀愀琀攀漀昀琀栀攀愀爀琀洀愀渀甀昀愀挀琀甀爀椀渀最昀愀挀椀氀椀琀椀攀猀椀渀䈀爀椀猀戀愀渀攀愀渀搀䘀椀樀椀Ⰰ 䔀氀氀椀漀琀琀猀栀愀猀琀栀攀挀愀瀀愀戀椀氀椀琀礀琀漀搀攀猀椀最渀Ⰰ 圀椀琀栀漀甀爀猀琀愀琀攀漀昀琀栀攀愀爀琀洀愀渀甀昀愀挀琀甀爀椀渀最昀愀挀椀氀椀琀椀攀猀椀渀䈀爀椀猀戀愀渀攀愀渀搀䘀椀樀椀Ⰰ 䔀氀氀椀漀琀琀猀栀愀猀琀栀攀挀愀瀀愀戀椀氀椀琀礀琀漀搀攀猀椀最渀Ⰰ 挀漀渀猀琀爀甀挀琀Ⰰ 愀渀搀洀愀渀甀昀愀挀琀甀爀攀琀栀攀瀀攀爀昀攀挀琀挀甀猀琀漀洀椀猀攀搀最愀爀洀攀渀琀猀漀氀甀琀椀漀渀昀漀爀礀漀甀爀猀愀昀攀琀礀渀攀攀搀猀⸀

䄀甀猀琀爀愀氀椀愀渀洀愀搀攀挀甀猀琀漀洀椀猀攀搀儀甀愀氀椀琀礀匀愀昀攀琀礀䜀攀愀爀⸀


Protect your tool of tradewith ELLIOTTS’ Safety Gloves & Apparels

ALWAYS SPECIFY ELLIOTTS!

WAKATAC BLUE MAX

CHROME LEATHERGOLDEN CHIEFBIG RED

HIGH VISIBILITY

Learn more about Elliotts Safety Gloves and Apparelsat www.elliottsinternational.com

44

Elliott Australia Pty Ltd23 Vauxhall Street, Virginia, QLD 4014 Australia

Ph 07 3265 2944www.elliottsinternational.com

welding - Elliotts · 2016-02-01 · Unlined Part No. KCM10 Unlined Woven Kevlar® mitt felt back...

Documents

Transcript of welding - Elliotts · 2016-02-01 · Unlined Part No. KCM10 Unlined Woven Kevlar® mitt felt back...