Welcome to use PS90 car diagnostic tool, which is based on ...

X100PAD EliteAuto Key Programmer

User Manual

X100PAD Elite Diagnosis System

Declaration1. This manual is designed for the usage of X100PAD Elite, applying to X100PAD Elitesmart automotive diagnosis platform.No part of this manual can be reproduced, stored in a retrieval system ortransmitted, in any form or by any means (electronic, mechanical, photocopying,recording, or otherwise), without the prior written permission of Xtool.2. Use the device only as described in this manual. The user will be responsiblesolely for the after-effects of violating the laws and regulations caused by using theproduct or its data information; in this case Xtool will not bear any legalresponsibility.3. Xtool shall not be liable for any incidental or consequential damages or for anyeconomic consequential damages arising from the accidents of individual users andthe third parties, misuse or abuse of the device, unauthorized change or repair ofthe device, or the failure made by the user not to use the product according to themanual.4. All information, specifications and illustrations in this manual are based on thelatest configurations and functions available at the time of printing. Xtool reservesthe right to make changes at any time without notice.

5. is the registered trademark of SHENZHEN XTOOLTECH CO.,LTD.

6.In countries that the trademarks, service marks, domain names, logos and thename of the company are not registered, Xtool claims that it still reserves theownership of the unregistered trademarks, service marks, domain names, logos andthe company name. All other marks for the other products and the company’s namementioned in the manual still belong to the original registered company.You may not use the trademarks, service marks, domain names, logos and companyname of Xtool or other companies mentioned without written permission from thetrademark holder.7. Please visit www.xtooltech.com for more information on the X100PAD Elite.8. Xtool reserves the right for the final interpretation of this manual content.

Xtool X100PAD Elite User Manual InstructionsPlease read this user manual carefully before using the scanner.When reading the manual, please pay special attention to the words “Note”,“Caution” or “Warning”, read them carefully for appropriate operation.

http://www.xtooltech.com


Xtool X100PAD Elite Diagnosis System Main Unit MaintenanceAvoid shaking or dismantling the unit as it may damage the internal components.Do not use hard or sharp objects to touch the LCD screen; do not use excessive force;do not expose the screen to strong sunlight for a long period.Caution: keep it away from water, moisture, high temperature or very lowtemperature.If necessary, calibrate the screen before testing to ensure the accuracy of LCDperformance.Keep the main unit away from strong magnetic fields.

Operation InstructionsFor safe operation please follow the instructions below:Keep the scanner away from heat or fumes when using it.If the vehicle battery contains acid, please keep your hands and skin or fire sourcesaway from the battery during testing.Exhaust gas of vehicle contains harmful chemicals, please ensure adequateventilation.Do not touch the cooling system components or exhaust manifolds when engine isrunning due to the high temperatures reached.Make sure the car is securely parked, Neutral is selected or the selector is at P or Nposition to prevent the vehicle from moving when engine starts.Make sure the (DLC) diagnostic link connector is functioning properly before startingthe test to avoid damage to the Diagnostic Computer.Do not switch off the power or unplug the connectors during testing, otherwise youmay damage the ECU and/or the Diagnostic Computer.


ContentsCHAPTERⅠ About X100PAD Elite.................................................................................11. Appearance................................................................................................................ 11.1. Front View............................................................................................................... 11.2. Back View................................................................................................................ 12. Layout of X100PAD Elite Tablet.................................................................................. 22.1. Top View of X100PAD Elite Tablet........................................................................... 22.2. Side View of X100PAD Elite Tablet.......................................................................... 23. X100PAD Elite Technical Parameters..........................................................................3CHAPTERⅡ How to Use X100PAD Elite ...................................................................... 41. X100PAD Elite Activation............................................................................................42. X100PAD Elite Main Interface and Functional Buttons Descriptions.........................52.1. Main Interface.........................................................................................................52.2. Sub-menu and Functional Buttons ........................................................................52.3. Toolbar Functional Buttons.....................................................................................63. Vehicle Connection Diagnosis.................................................................................... 73.1. Vehicle Connection Test.......................................................................................... 73.2. Precautions Before Use...........................................................................................84. Special function and Diagnosis...................................................................................94.1. Menu Options......................................................................................................... 94.2. Test Functions........................................................................................................104.3. Read ECU .............................................................................................................124.4. Read DTCs..............................................................................................................134.5. Clear DTCs............................................................................................................. 135. Settings.....................................................................................................................146. XCloud...................................................................................................................... 157. Update......................................................................................................................158. Report.......................................................................................................................169. Remote.....................................................................................................................17CHAPTERⅢ How to Use KC100..................................................................................18CHAPTER Ⅳ LocationofDiagnosticLinkConnectorsonDifferentVehicleModels.............. 211. Diagnostic Link Connectors Locations of Various Vehicle Models........................... 212. Location Diagram of Vehicle Diagnostic Link Connectors........................................ 243. Diagnostic Link Connectors Terminal Definition and Communication Protocols.....24


1

CHAPTERⅠ About X100PAD Elite1. Appearance1.1. Front View

1.2. Back View


2

④ ⑤③

2. Layout of X100PAD Elite Tablet2.1. Top View of X100PAD Elite Tablet

1 ②

①USB3.0 interface: Wired data transmission

②Mini HDMI interface: Audio and video transfer

③DB15 interface: Extended reservation port

④DC charging port: Device Charging

⑤Power Button: Power on / off

2.2. Side View of X100PAD Elite Tablet

①

①Charger Interface: A reserved charger interface


3

3. X100PAD Elite Technical Parameters

Operating System AndroidProcessor Quad-core 1.8GHz ProcessorMemory 2G RAM, 64G FLASHDisplay 8 inch IPS LCD with 1024x768p resolutionCamera Rear camera, 5.0 Megapixel,AF with FlashlightSensors Gravity Sensor, Ambient Light SensorInterface USB3.0,DC charging port,DB15 interface,MINI HDMI

Audio Input/Output Microphone,Dual Speakers, 3-Band 3.5mmstereo/standard headset jack

Battery 10000 mAh 3.7V lithium polymer batteryPower Consumption -20 to 50℃(-4to126℉)WorkingTemperature -20℃ to 50℃ (-4℉ to 126℉)Relative humidity <90%Dimension(L×W×H) 240×177×30mm


4

CHAPTER Ⅱ How to Use the X100PAD Elite

1. X100PAD Elite Activation

1.1. Please activate X100PAD Elite before you use it to test vehicles. And pleaseconnect WiFi first.

1.2. Please fill in the company name and mailbox, (no need to fill in Phone numbercause overseas phone number cannot receive the auth code.), then click OK tocomplete the activation.


5

2. X100PAD Elite Main Interface and Functional Buttons Descriptions2.1. Main InterfaceTap on X100PAD Elite application icon, the main interface and sub-menus will beshown as below.


6

2.2. Sub-menus and Function ButtonsFunctional Buttons Functional Descriptions

【Diagnosis】Read vehicle diagnosisinformation

【Diagnose report】Read vehicle report

【Setting】Language, unit, Bluetooth

【Xtool cloud】Online chatting

【One-click upgrade】Upgrade software

【Remote control】Xtooltech supportcenter and function keys


7

Interface Taskbar

FunctionalButtons Descriptions

【Return to the previous interface】

【Decrease the volume】

【Increase the volume】

【Return to the main interface of Android】

【Show recently used programs】

【Screenshot】

【Back to the diagnosis model interface】

【Screen recording】

3. Vehicle Connection Diagnosis3.1. Vehicle Connection Testa. Turn on X100PAD Elite tabletb. Connect cables and X100PAD Elite in following order: ①→②→③→④c. Switch on the ignition and tap on X100PAD Elite application to test vehicles.(Shown as follows)


8

1 X100PAD Elite Tablet

2 Main cable

③ OBDII-16 Adapter (Select other adapters if needed)④ Measured vehicle

3.2. Precautions before Use3.2.1. The vehicle power supply has to meet the normal voltage limits DC 9-15V3.2.2. Users should check the position of the DLC port and ensure the OBDII 16pinconnector and the DLC port are correctly aligned before attempting to connect.3.2.3. When taking some special functions tests, users are required to operate thedevice according to operating instructions. For vehicle, it has to strictly meet therequirements, for example, the conditions that some vehicle models need to bereached are as follows: engine temperature 80℃/105℃, turn off the loads (such asheadlights, air-conditioner, etc.), put accelerator pedal in released position, etc.3.2.4. If users can not find the tested vehicle model or electronic control system inthe X100PAD Elite test menu, they may need to update the software or consult Xtooltechnical service department.3.2.5. Please ensure that only official XTOOL cables and connectors are used toprevent damage to the unit.3.2.6. Before powering off the unit, please ensure that you cancel or complete thecurrent task or function and return to the main interface, then power off.3.2.7. Do not use excessive force to operate the touch screen.3.2.8. During long period of non-use, please disconnect the power and turn off theX100PAD Elite unit.

../../../../../Documents and Settings/XTOOL/Local Settings/Application Data/Yodao/DeskDict/frame/20150505104432/javascript:void(0);

../../../../../Documents and Settings/XTOOL/Local Settings/Application Data/Yodao/DeskDict/frame/20150505104432/javascript:void(0);


9

4.Special function and Diagnosis4.1. Menu Options4.1.1. After the X100PAD Elite mainframe is connected to the vehicle via main testcable, Immobilization can be performed. The Immobilization interface is shown asbelow:

4.1.2. X100PAD Elite lists Instrument Cluster is Adjust the historical data of theinstrument and perform repair operations. The Instrument Cluster interface is shownas below:


10

4.1.3. Users can choose the relevant menu for the vehicle being tested: selection forEurope will enter the European cars menu, selection for Asia will enter the Asian carsmenu, selection for America will enter the American cars menu.

4.1.4. Besides the usual system diagnostic functions, XTOOL also has developed aseries of special diagnostic functions for certain vehicles as follows:

4.2. Test Functions: it can read and clear faults codes for all systems of vehicles.4.2.1.Using BMW as an example, select CommonDiagnosis, then select EUROPE. Choose theBMWword. If theword isnotshowingonthescreen,pleaseswipeupordowntodisplay it.


11

PLEASE NOTE: Different vehicles have different menus and systems.Common main function menu includes the following options:Read ECU: This function is to read the ECU version information, which is theequivalent of “System Identification” or “System Information” in some electroniccontrol systems.This will allow you to read ECU related software and hardware versions, models andproduction date of diesel engine, part number, etc.Read DTCs: read the trouble codes that are stored in the ECU.Clear DTCs: clear current and historical trouble codes memory in ECU. The troublecodes can not be erased without eliminating the fault that the code relates to. TIP:Save or print the currently stored fault codes before clearing them to provide help inthe case of an intermittent fault.4.2.2. Toolbar function buttons descriptionsFunction Buttons Descriptions

Return to previous interface

Print test data

Click to record the data, click again to send yourfeedback to XTOOL service center

After clicking the data record button the second time the data feedback page willappear as shown below, showing diagnostic software version, vehicle being tested,and the steps performed in the diagnostic process. Users can then enter the natureof the problem and any other relevant information and send the form to the Xtoolengineering department.


12

4.3. Read ECUThis function is used to read ECU version information, which is the equivalent of“System Identification” or “System Information” in some electronic control systems.This will allow you to read ECU related software and hardware versions, models andproduction date of diesel engine, part number, etc. shown below:


13

4.4. Read DTCsSelect Read Fault Codes to read the trouble codes stored in the ECU. The screen willshow the trouble codes and their definition, shown below:

Tip: In the process of diagnosis, if the device shows “System is OK” or “No TroubleCode”, it indicates that the ECU has not detected a fault in any of the circuits that itmonitors. If there is a fault which is not being recorded it may be that the fault iswith a part of the system not under the control of ECU, such as a mechanical systemfault. It is also possible that the signal of a system sensor may be incorrect but stillwithin the ECUs stored limits, this can be verified in Live Data.4.5. Clear DTCs4.5.1. Return to the previous step, select Clear Fault Codes to clear the current andhistorical trouble codes memory in ECU. Performing this function will clear all thecurrent and historical trouble codes. Please ensure that the trouble codes have beenrecorded before clearing, shown below:


14

4.5.2. Click YES to confirm the operation, if the communication is normal, it willshow “Trouble Codes has been Cleared Successfully” or “Trouble Codes Cleared”.Generally, users will need to re-read trouble codes after clearing them to confirmthat the trouble codes have been cleared.

5. SettingsBy selecting Settings users can set the language, unit and other system related options.Languages: select the language. Please tick the required option from themulti-language options on the right.

Units: Select unit of measurement. Users can select Metric or British Unit.


15

6. XCloud (English version is coming soon)All the auto maintenance technicians who use our products can not only look up themaintenance information that we put on our cloud service platform conveniently,and combine the diagnosis result to query, and communicate with other Xtool usersin our forum, but can also access various online databases of maintenance anddiagnostic skills and vehicle maintenance plans.7. UpdateX100PAD Elite updates directly via the Internet using WiFi or wired connection. To accessthe update application open the X100PAD Elite application and click UPDATE , shownbelow.


16

8. ReportReport is used for viewing and printing the saved files, such as Live Data, Trouble Codes orpictures generated in the process of diagnosis, users also can view a record of which carshave been previously tested. It includes three parts: PDF Files, Pictures andData Playback.

8.1. PDF Files:8.1.1. PDF files are the diagnostic reports of Live Data or Trouble Codes that have beensaved during diagnosis. Entering PDFwill allow you to view andprint these reports.

8.1.2 Click PDF icon to generate PDFwhen youwant to save the trouble code report8.2. Data Replay:With Data Playback you can play back recorded Data.


17

8.3. File Management:Pictures are all the screen capture files saved in the diagnosis process.

9. RemoteIf users encounter problems and are not able to solve them, they can open thisapplication and ask for remote assistance.How to get remote assistance from Xtool Technical Assistance Center:a. Open X100PAD Eliteb. ClickRemote andopen the TeamViewer interface. Generate and display device ID.c. Your partner will also need to download and install Team Viewer.d. Inform your partner of your Team Viewer ID and password to enable them to

begin remote access of the X100PAD Elite.


18

CHAPTERⅢ How to Use KC100KC100 works with VW/Audi/Skoda/Seat 4th and 5th immobilizer software and BMWCAS1-5 FEM IMMO immobilizer software. Let’s take VW as an example. Since VW4th and 5th Immo programming needs online programming, please make sureX100PAD Elite connect Internet before doing programming. Please find operation

steps as below:1. Please use main cable and OBDII connector (or other relative connector) to

connect between X100PAD Elite and your car’s OBD port.2. Please useUSB tomini USB cable to connect between X100PADElite andKC100.


19

3. Please switch ignition on position, then enter software as following steps:Immobilization - VW - 4th/5th Immobilizer System


20

4. If your car is 4th immobilizer system, please click 4th immobilizer system. If yourcar is 5th immobilizer system, please click 5th immobilizer system. It will detectyour meter type automatically, if it does not detect successfully, you canchoose your meter type manually.

5. Then follow the instructions that software reminds you to copy new keys.


21

CHAPTER Ⅳ Location of Diagnostic Link Connectors on

Different Vehicle Models1. Diagnostic Link Connectors Locations of Various Vehicle Models

*AUDI A6: the OBD plug is on the lower left side of the dashboard, use SMARTOBDII-16 connector.

*VW Bollywood 1.8: the OBD plug is below the console, use SMART OBDII-16connector.

*Benz S320,220 Chassis: the OBD plug is below the dashboard, use SMART OBDII-16connector.


22

*Benz C180: the OBD plug is on the left hand side of the engine bay, use Benz-38connector.

*Benz 300SEL 140 chassis: the OBD plug is on the left hand side of the engine bay,use Benz-38 connector.

*GM Buick: the OBD plug is below the dashboard, use SMART OBDII-16 connector.

*GM Buick GL8 : the OBD plug is below the dashboard, use SMART OBDII-16connector.


23

*VW POLO: the OBD plug is below the dashboard, use SMART OBDII-16 connector.

*BMW 735I: the OBD plug is in the right hands side of the engine bay, use BMW-20connector.

*VW Passat B5: the OBD plug is behind the gearlever and beside the parking brakelever. Lift the cover to access it. Use SMART OBDII-16 connector.


24

2. Location Diagram of Vehicle Diagnostic Link ConnectorsLocation diagram of pick-up truck diagnostic link connectors:

Location diagram of utility vehicles diagnostic link connectors:

Link diagram of small car diagnostic link connectors:

NOTE: Each vehicle manufacturer may use additional pins to diagnose a variety ofsystems. Not every manufacturer uses the same standard. The function on a certainpin will vary from manufacturer to manufacturer. Verify with the manufacturer.3. Diagnostic Link Connectors Terminal Definition and Communication Protocols3.1. Standard OBDII Diagnostic Link Connector:

Pin Definition (Reference material)Various pin definitions as follows:1. Manufacturer definition2. SAE J1850 bus positive3. Manufacturer definition4. Bodywork site5. Signal site


25

6. ISO 15765-4 defined CAN high7. ISO9141 and ISO14230 defined K line8. Manufacturer definition9. Manufacturer definition10. SAE J1850 bus negative11. Manufacturer definition12. Manufacturer definition13. ISO 15765-4 defined CAN low14. ISO9141 and ISO14230 defined L line15. Permanent positive voltage[1] 1, 3, 8, 9, 11, 12 and 13 are defined by manufacturer.[2] 2, 6, 7, 10, 14 and 15 are used for diagnostic communication. Unused definitionscan be defined by manufacturers.

Shenzhen Xtooltech Co., Ltd

Company address: 2nd Floor, Building No.2, Block 1, Excellence City, No.128,Zhongkang Road, Shangmeilin, Futian District, Shenzhen, China

Factory address: 2/F, Building 12, Tangtou Third Industrial Zone, Shiyan Street,Baoan District, Shenzhen, China

Service Hotline: 0755-86267858/ 0755-21670995Email: [email protected]: 0755-83461644Website: www.xtooltech.com

http://www.xtooltech.com

Welcome to use PS90 car diagnostic tool, which is based on ...

Documents

Transcript of Welcome to use PS90 car diagnostic tool, which is based on ...