Welcome to Suspect/Counterfeit Items Awareness Training
-
Upload
blossom-price -
Category
Documents
-
view
56 -
download
0
description
Transcript of Welcome to Suspect/Counterfeit Items Awareness Training
1
Welcome to
Suspect/Counterfeit Items Awareness
Training
QA-SCI-3A
Click to Continue
2
Conditions for Completing this Course
In order to receive credit for this training course, you must agree to comply with the following conditions.
All responses to this course must be provided solely by the student. The student may neither seek nor receive any assistance, either written or oral, for such responses. Seeking and/or using assistance constitutes a violation of DOE and BNL requirements and could result in disciplinary action. This course is for BSA employees, onsite contractors and suppliers use only.
Do you accept these conditions?
Accept Reject
Click on the control buttons along the bottom of each screen to navigate your way through this course. These buttons are defined as
Next screen
Previous screen
Each screen has a link that enables you to e-mail your questions to an expert for answers, or send comments about this training.
Instructions
Introduction to Suspect/Counterfeit Items
At the completion of this training, you will be able to:
• Identify Suspect/Counterfeit Items and where they may be discovered, including:
– Contractor equipment (cranes, slings, aerial lifts, below the hook lifting devices, etc.)
– Supplied or purchased material
• List the Brookhaven requirements for employees, contractors, and suppliers concerning Suspect/Counterfeit Items.
• Identify potential consequences from having Suspect/Counterfeit parts in the workplace.
• Fulfill your role in the Suspect/Counterfeit Items program.
• Proceed as required once a Suspect/Counterfeit Item is found, including:
– Required Reporting Actions and Engineering Evaluation
What is a Suspect or Counterfeit Item?
Suspect Items: A suspect item is one in which there is an indication by visual inspection, testing, or other information that it may not conform to established Government- or industry-accepted specifications or national consensus standards. Counterfeit Items: A counterfeit item is a suspect item that is a copy or substitute without legal right or authority to do so or one whose material, performance, or characteristics are knowingly misrepresented by the vendor, supplier, distributor, or manufacturer.
The Five Suspect/Counterfeit Items Categories are:1. Piping and piping components (including mechanical and metal
products)2. Electrical/electronic components 3. Fasteners (e.g. Grade 5 and 8 bolts)4. Hoisting and Rigging (material handling) components5. Documentation and Certification
Potential Consequences of Having Suspect/Counterfeit Items in the Workplace
Suspect/Counterfeit Items can:• Cause an unsafe condition that puts people at risk of
injury or death• Cause a spill or release to the environment• Cause extensive damage to equipment• Cause delays that impact project schedules and cost:
• Equipment can’t be used until concern is resolved
• Reporting requirements to the Dept. of Energy (DOE)
• Engineering evaluation may need to be performed
• Material containing Suspect/Counterfeit Items must be segregated and cannot be returned to the supplier/subcontractor.
The Five Categories of Suspect/ Counterfeit Items
Category 1 – Piping
Category 2 – Electrical
Category 3 – Bolts/Fasteners
Category 4 – Hoisting and Rigging/Material Handling
Category 5 – Documentation and Certification
The following slides show examples of Suspect/Counterfeit Items in each category.
Counterfeit Valve – WATTS Ball Valves
The “½ PSI” pressure marking is incorrect for the valve on the left (this is a 1/2 inch size valve generally used in fluid control.)
The valve on the right is a gas ball valve with the correct markings.
Additional counterfeit information includes extra approval markings (e.g. FM and AGA); as illustrated on the left.
WATTS gas ball valves are only approved by UL and CSA.Counterfeit Valve
Comparison between two ½” Forged CSA Ball Gas Valves
Left – Counterfeit
Right – Good
Conflicting information ½ psi – 608 WOG
FM – Factory Mutual marking
Label printed with both “General Electric” and “GE” markings - Manufacturer stopped marking with both indicators over 20 years ago.
New breakers should now only be marked with “GE”
Also, look for worn labels as sign of refurbished breakers.
Suspect General Electric Molded Case Circuit Breakers – Refurbished, Sold as New
Category 2- Electrical Example
Category 3 - Fasteners Example
Ratchet Tie-down without Strap
Bolt in ratchet is a Grade 8 with no manufacturer’s marking.
Manufacturer’s mark is required.
For more information, go to Dept. of Energy Suspect/Counterfeit Defective Items website: http://www.eh.doe.gov/paa/sci
Fastener Headmark
List
Known markings that indicate
Suspect/Counterfeit Fasteners
Click here for a Fastener Headmark Card.
Category 4 - Hoisting and Rigging Example
Shackle
No manufacturer markings. “China” is marked; however, this is unacceptable as Dept. of Energy standards require the manufacturer’s name or trademark.
(DOE-STD-1090)
Category 5 –Documentation and Certification ExampleCounterfeit Certificate
Certified Material Test Reports - Look for data/information that isduplicated but should be unique. For example: 1. Specification numbers are the same
on multiple certificates2. Heat numbers are the same
Look for data/numbers that do not add up correctly. For example:3. Total of chemical alloys should be
between 99-100%. This Report total is 164%.
What is Your Responsibility if a Suspect/ Counterfeit Item is Found:
If you Discover a Suspect/Counterfeit Item, You Must:
1. Stop using the equipment that contains the Suspect/ Counterfeit Item.
2. Make sure that the Suspect/Counterfeit Items Coordinator is notified. If you don’t know who the Suspect/Counterfeit Items Coordinator is, contact:
For Brookhaven Employees: contact your ES&H Coordinator or Quality Representative who will then notify the Suspect/Counterfeit Items Coordinator.
For Contractors/Suppliers: contact your Brookhaven Point of Contact, who will then notify the Suspect/Counterfeit Items Coordinator.
Summary
Your Role in Suspect/Counterfeit Items program is to prevent Suspect/Counterfeit Items from being used at BNL.
• Be aware of the potential for suspect/counterfeit items and the five categories where they can occur.
• Look for the identifiers that indicate the potential for a suspect or counterfeit part or item.
You are required to stop using the equipment and notify appropriate personnel when a suspect/counterfeit item is found.
Resources Available for More Information
Click any of the tools below to help identify Suspect/Counterfeit Items
Suspect Bolt Head Marking Card / Head Mark List
Suspect Indications List
Suspect Stainless Steel Fastener Head Mark List.
For a complete listing of Suspect/Counterfeit Items, see: •Suspect/Counterfeit Items Manual
For additional information on Brookhaven requirements, see:•Suspect/Counterfeit Items Subject Area
Contact your Brookhaven Point of Contact, ESH Coordinator, or the Suspect/Counterfeit Items Coordinator for more information.
Quiz