WELCOME TO FOOD INGREDIENTS ASIA 2014 Food …eems.ubmasia.com/eEMS/ShowFiles/389/2641.pdf · Thank...
Transcript of WELCOME TO FOOD INGREDIENTS ASIA 2014 Food …eems.ubmasia.com/eEMS/ShowFiles/389/2641.pdf · Thank...
1
Dear Exhibitors,
A very warm welcome to Food ingredients (Fi) Asia 2014!
WELCOME TO FOOD INGREDIENTS ASIA 2014
Thank you for your participation in Food ingredients Asia 2014. The purpose of this Exhibitor Manual
is to efficiently assist your company in preparing for your forthcoming participation in the Exhibition.
You are advised to study this manual carefully to ensure that all relevant matters are processed
smoothly and arranged properly. Please keep a copy of all the forms for your own reference, so
that queries can be clarified immediately should they arise.
Upon completion of the relevant forms, please return them via the internet to the respective
companies stipulated on the top right hand corner of the forms. We would be grateful if you could
observe closely the deadlines for submission.
We will endeavour to maintain rates and prices quoted for all items contained herein. However,
there is a possibility that these may vary depending on the availability of material or labour before
the opening of the Exhibition.
Should you have any queries, please do not hesitate to contact us. We thank you for your support
and co-operation, and we look forward to seeing you at Food ingredients Asia 2014!
Sincerely,
The Organisers
2
SUMMARY
A General Information
A1 Venue & dates
A2 Organisers’ contact details
A3 Opening hours, build up & breakdown
A4 Hotels
A5 Admission for trade visitors
A6 Exhibitor badges & registration
A7 Contractor badges
A8 Catering
A9 Event hall specifications & regulations
A10 Stand fittings contractors
A11 Freight forwarder
A12 Electrical contractor
A13 Security contractor
A14 Cleaning contractor
B Publicity & Exposure
B1 Show catalogue listing (free of charge)
B2 Show catalogue advertising
B3 Trade visitor invitation tickets (free of charge)
B4 VIP invitation
B5 Exhibitor showcases
B6 Product first launching
B7 Press room
B8 How to assemble a press kit
B9 Press addresses
C Rules & Regulations
C1 Promotion during the show
C2 Demonstrations and presentations
C3 Security
C4 Official contractors
C5 Stand fitting contractors
C6 Stand boundaries and design restrictions
C7 Power supply and lighting
C8 Stand cleaning
C9 Exhibits move-in
C10 Customs requirements
C11 Storage
C12 Working exhibits
C13 Dangerous materials
C14 Insurance
C15 Damage to stand structures and exhibition premises
C16 Payment terms and conditions
C17 Cancellation of exhibition space
C18 Failure to exhibit
C19 Exhibitor information pack
C20 Groups and national groups
3
C21 Sales
C22 Unforeseen occurrences
C23 Word of caution
C24 Venue rules & regulations
D Freight Forwarding
D1 Shipping tariff
D2 Special instructions
D3 Temporary importation for exhibition goods
D4 On-site handling rates and services
E1 Order Forms - Exposure and publicity
FORM 1 Sharing companies on your stand
FORM 2 Free catalogue entry
FORM 3 Show catalogue advertising
FORM 4 Exhibitor name badges
FORM 5 Trade visitor invitation tickets
FORM 6 VIP nomination form
FORM 7 Sponsorship
FORM 8 Exhibitor showcases
FORM 9 First launching
E2 Order Forms - Operational matters
FORM 10 Stand construction
FORM 11 Directory map board
FORM 12 Insurance
FORM 13 Shell scheme nameboard
FORM 14 Furniture and accessories
FORM 15 Lighting & electrics
FORM 16 Audio visual equipment
FORM 17 Compressed air
FORM 18 Water supply & drainage
FORM 19 Refrigerator Equipment
FORM 20 Telephone service
FORM 21 ADSL & WiFi
FORM 22 Security & CCTV service
FORM 23 Cleaning service
FORM 24 Plant & floral service
FORM 25 Heavy & large exhibits
FORM 26 Temporary staff
FORM 27 Hotel reservation
FORM 28 Visa application
4
A GENERAL INFORMATION
A1 Venue & dates
Venue : Jakarta International Expo
Hall D1-D2 and Hall A3
Arena PRJ, Kemayoran
Jakarta, Indonesia
Dates : Wednesday, October 15 to Friday, October 17, 2014
A2 The Organisers’ contact details
LOCAL
PT UBM Pameran Niaga Indonesia
3/F Aquarius Building
7, Jalan Sultan Iskandar Muda
Pondok Indah, Jakarta 12240, INDONESIA
Tel +62 21 729 2662
Fax +62 21 729 3539
Ms. Maria Lioe Ms. Anna Maria
Email [email protected] Email [email protected]
INTERNATIONAL
UBM Live
de Entree 73
Toren A 1101 BH Amsterdam
THE NETHERLANDS
Tel: + 31 20 40 99 560
Fax: +31 20 36 32 616
Ms. Tatiana Rozema
Sales Manager
Email: [email protected]
UBM Asia (Thailand) Co Ltd
503/23 KSL Tower 14th Floor, Sri Ayuthaya Road,
Kwaeng Thanon Phyathai, Khet Rajathewee
Bangkok 10400, THAILAND
Tel +66 2 642 6911
Fax +66 2 642 6919-20
Ms. Nongnaphat Jeerakitlert
Sales & Marketing Manager: Thailand Email: [email protected]
Operations Department
Ms. Rungphech Chitanuwat
Business Director
Email: [email protected]
Mr. Atip Tubtim
Assistant Operations Manager
Email: [email protected]
Ms. Rachadaporn Khongthon
Assistant Operations Manager
Email: [email protected]
5
A3 Opening hours, build up & breakdown
Wednesday 15 October 2014 09.00 hrs – 10.00 hrs Opening Ceremony
10.00 hrs – 18.00 hrs
Thursday 16 October 2014 10.00 hrs – 18.00 hrs
Friday 17 October 2014 10.00 hrs – 17.00 hrs
During the exhibition period, exhibitors will have access to the hall one (1) hour before the opening
hours and after the closing hours to service their stands or exhibits. Exhibitors who require access
beyond given hours should contact Operations Department in advance.
Build up Date Time
Move-in of Official Stand Fitting Contractors
- Shell Scheme Stands Construction
13 October 2014
14 October 2014
11.00-24.00 hrs.
00.01-24.00 hrs.
Move-in of Heavy and/or Large Exhibits * Hand carry items can be move-in on 14 October 2014
(8.00 - 24.00 hrs.)
13 October 2014 13.00-24.00 hrs.
Move-in of Special Design and Other Contractors
13 October 2014
14 October 2014
13.00-24.00 hrs.
09.00-20.00 hrs.
Exhibitor Registration
Exhibitor Move-in for Decorating
14 October 2014
08.30-20.00 hrs.
08.30-21.00 hrs.
Show days Date Time
Exhibitor Access to Exhibition Halls
15 October 2014
16 October 2014
17 October 2014
08.00-19.00 hrs.
09.00-19.00 hrs.
09.00-23.00 hrs.
Tear down Date Time
Exhibition Closes 17 October 2014 17.00 hrs.
Move-out of Exhibits and Stands 17 October 2014 17.00-23.00 hrs.
Power Supply to be Switched Off, Dismantling of
Electrical Installations 17 October 2014 18.00 hrs.
Move-out of Heavy and/or Large Exhibits, Stand
Fitting Materials 17 October 2014 22.00 – 23.00 hrs.
Halls Closed for Cleaning 17 October 2014 23.00 – 24.00 hrs.
Halls Hand Over to JI Expo 17 October 2014 24.00 hrs.
Note: Move in/out of any exhibitor or decorating items with trolleys are allowed at the back door (loading
door) of exhibition halls only. This applies to build up, show days and use tear down.
6
A4 Hotels
HOTEL BOROBUDUR JAKARTA
Jalan Lapangan Banteng Selatan
Jakarta 10710 , Indonesia
Tel: + 62 21 380 5555
Fax: + 62 21 380 9595
Website: www.hotelborobudur.com
HOLIDAY INN JAKARTA KEMAYARAN
Jl. Griya Utama Block B1,
Jakarta 14350, Indonesia
Tel: + 62 21 2956 8800
Fax: + 62 21 2956 0088
Website: www.holiday-inn.com
THE MEDIA HOTEL & TOWERS
(PREVIOUSLY SHERATON MEDIA)
Jalan Gunung Sahari 3 ,
Jakarta 10720
Tel: +62 21 626 3001
Fax: +62 21 626 3026
Website: www.themediahotel.com
A5 Admission for trade visitors
Free admission for professionals, trade and business visitors, is by invitation and registration only.
Minors under the age of 18 and members of the general public will not be admitted. The
Organisers reserve the right to refuse admission or to remove any person without giving a
reason. This applies also to the build up and dismantling periods.
Invite your clients
Exhibitors are advised to encourage their (prospective) customers to pre-register before 8
October 2014 by registering on line or faxing the completed registration form on visitor
invitation cards to the Organisers so as to save valuable time upon arrival at the exhibition
centre. Pre-registered trade visitors may collect their badges at the pre-registered trade
visitors’ counter upon their arrival on site.
Please note that this is a trade exhibition, minors under age of 18 will not be allowed
admission, either as visitors or exhibitors.
For extra visitor invitation tickets, please fill out FORM 5 – Trade visitor invitation tickets
Deadline: 22 August 2014
A6 Exhibitor badges and registration
Exhibitor Registration: Tuesday 14 October 2014, 8.30 hrs – 20.00 hrs
Exhibitor badges are only meant for exhibitors and their staff manning stands during the
exhibition days and will be issued in accordance with the list of names given in the Exhibitor
Badge Registration Form. For security reasons, exhibitors and their personnel are requested to
wear their badges at all times during the exhibition.
7
Exhibitors are requested to make their First Stop at the Exhibitor Registration Counter when they
arrive on site, to collect their badges.
Exhibitor Registration: Tuesday 14 October 2014, 8.30 hrs – 20.00 hrs
To order Exhibitor name badges, please fill out FORM 4
Deadline: 22 August 2014
A7 Contractor badges
For the purpose of stand construction and moving of exhibits, badges will be issued by the
Organisers permitting approved contractors and their workmen to enter the exhibition hall
during the build-up and dismantling period only. A limited number of standby badges may be
issued should a contractor have a valid reason to be present during the exhibition period (e.g.
maintenance, remedial purposes, etc.).
Please contact the Organisers to obtain these badges.
For security reasons, contractors and their workmen are to wear their badges when in the
exhibition hall at all times.
A8 Catering
A variety of catering can be ordered at the exhibition centre. Please note that all catering on
your stand must be ordered through Jakarta International Expo’s in house Food & Beverage
service : Ms Tresya Wiguna at Mobile Number +62 81 8080 21213, email :
[email protected] or call JI Expo general line at +62 21 2664 5000
& REGU
A9 Event hall specifications & regulations
Hall D1:
Ceiling Height Floor Loading Ceiling Hang Points Floor Type
12 – 17.5 m 3,000–5,000 kgs/sqm N/A Concrete Slab - Tiles
ELECTRICAL 380/220V, 50 Hz, 3 Phase Capacity 6,000 KVA
OPERABLE WALLS Finished Concrete Block
The operable wall systems shall not have anything attached
to, leaned against nor hung from.
UTILITY SERVICES Utility hatches provide electric Power, Water Supply,
Drainage, Telephone, Cable Data, CCTV, IHB.
COMPRESSED AIR Available upon order and subject to additional charge
WATER & DRAINS A separate quotation will be provided for special drainage for
disposal of hazardous materials and polluting products.
EXHAUST SMOKE & FUMES N/A
8
Hall D2:
Ceiling Height Floor Loading Ceiling Hang Points Floor Type
12 - 16 m 3,000-5,000 kgs/sq.m N/A Heavy Duty Carpet Tiles
ELECTRICAL The centre supply 380/220 v, 50Hz, 3 phase 6,000 Kva
OPERABLE WALLS Wall structure is acoustical panel.
The operable wall systems shall not have anything attached
to, leaned against nor hung from.
UTILITY SERVICES Utility hatches provide electrical, compressed air, water &
drains, telephone and exhaust smoke & fumes throughout the
hall for each booth.
COMPRESSED AIR Compressed Air of NOT OVER 1/2HP ONLY, regardless of type,
be permitted in the exhibit booths. Charges will be as per the
electrical hook up rates.
WATER & DRAINS A separate quotation will be provided for special drainage for
disposal of hazardous materials and polluting products.
EXHAUST SMOKE & FUMES Exhaust removal for smoke and noxious fumes is available.
The exhaust hood will run through the utility hatch into the
exhaust system. Charges will be assessed on the requirements
Hall A3:
Ceiling Height Floor Loading Ceiling Hang Points Floor Type
8 – 15 m 2,000-5,000 kgs/sqm N/A Concrete Slab
ELECTRICAL The centre supply 380/220 v, 50Hz, 3 phase 2,250 Kva
OPERABLE WALLS Wall structure is finished concrete block
UTILITY SERVICES Utility hatches provide electrical, water & drains and
telephone
COMPRESSED AIR Compressed Air of NOT OVER 1/2HP ONLY, regardless of type,
be permitted in the exhibit stands. Charges will be as per the
electrical hook up rates.
WATER & DRAINS A separate quotation will be provided for special drainage for
disposal of hazardous materials and polluting products.
9
A10 Stand fitting contractors
Official Stand Fitting Contractor: Cityneon Prima Mandiri
Kota Baru Bandar Kemayoran Block C4
Jakarta 14410, Indonesia
Tel +62 21 641 4630 Fax +62 21 641 4634
Contact Ms. Dian or Ms. Ratnawati
Email [email protected], [email protected]
For raw space exhibitors who require special design contractors, the Organisers provide the
following options of recommended stand fitting contractors for selection.
PT KINGSMEN INDONESIA PT EVENTPRO SUPPORT ASIA
Jalan Peta Barat No 11 Gedung PIC, 3rd Floor
Kalideres, Jakarta 11840 Jalan Teluk Betung No 43, Jakarta 10230
Indonesia Indonesia
Tel +62 21 5439 6898 Tel +62 21 310 3636
Fax +62 21 540 7819 Fax +62 21 315 7289
Contact Ms Diana Yuliani Contact Mr Marius Sulistio
[email protected] [email protected]
PT WANINDO PRIMA PT PENTAWIRA CIPTA INDONESIA
Jalan Haji Aseni 88, Komplek Kopti Ruko Prima Sunter, Jl Agung Timur 8
Semanan, Jakarta 11850 Blok B No 9, Jakarta
Indonesia Indonesia
Tel +62 21 5437 6477 Tel +62 21 2946 0771
Fax +62 21 5437 6475 Fax +62 21 2945 61919
Contact Ms Chicca Lisera Contact Ms Sari
[email protected] [email protected]
PT CITYNEON PRIMA MANDIRI PT WARNA KREASI DESAIN
Kota Baru Bandar Kemayoran Jalan Kelurahan 1 Blok 5 No 18, Duren Sawit
Blok C4, Jakarta 14410 Jakarta
Indonesia Indonesia
Tel +62 21 641 4630 Tel +62 21 861 1724
Fax +62 21 641 4634 Fax +62 21 861 1724
Contact Ms Dian Contact Ms Pintalia Rahadian
[email protected] [email protected]
BRIGHT DESIGN ADDEX COMPANY LIMITED
Mega Glodok Kemayoran 1st Floor 111 Onnuch Soi 64, Onnuch Road Suanluang,
Block A2 No 18 Bangkok, 10250 Thailand
Jalan Gunung Sahari Kav B – 8 Tel +66 2322 2111 Ext. 210
Jakarta, Indonesia Fax +66 2322 2145-6
Tel +62 21 2664 7281 Contact Mrs Ana Victoria S.Kebasen (Annie)
Fax +62 21 2664 7281 [email protected],
Contact Ms Henny Susilawati [email protected]
10
NCC IMAGE CO LTD PT PIEE INTERNATIONAL
Queen Sirikit National Convention Center Rukan Puri Mutiara blok BD 12
60 New Rachadapisek Road, Klongtoey, Jl. Griya Utama, Sunter Agung
Bangkok 10110 Jakarta Utara 14350
Thailand Indonesia
Tel + 66 (0) 2203 4142 Tel +62 21 2956 9471 / 72
Fax + 66 (0) 2203 4117 Fax +62 21 2956 9470
Contact Mr Surawat Weoprasert Contact Mr Steve Lim
[email protected] [email protected]
QUBE INTEGRATED INDONESIA
Jl. Tebet Barat 8 No.28
Jakarta Selatan 12810
Indonesia
Tel +6221 8379 2345
Fax +6221 8379 2295
Contact Ms Viene Yoerenta
11
A11 Freight forwarder
R.E. Rogers (Malaysia) Sdn Bhd
No. 7, Jalan Warden U1/76
Taman Perindustrian Batu Tiga
40000 Shah Alam, Selangor Darul Ehsan
Malaysia
Tel +603 5510 8611 Fax +603 5510 6296
Contact Mr Chris Smith
Email [email protected]
Contact Mr Syed Amirul Hafidz
Email [email protected]
A12 Electrical contractor
All electrical works are to be carried out by the Official Contractors.
Cityneon Prima Mandiri
Kota Baru Bandar Kemayoran Block C4
Jakarta 14410, Indonesia
Tel +62 21 641 4630 Fax +62 21 641 4634
Contact Ms. Dian or Ms. Ratnawati
Email [email protected], [email protected]
A13 Security contractor
The Organisers provide general security services through Chase Security, please contact the
Organisers : Ms Anna Maria ([email protected]) if you require specific security service
for your stand.
A14 Cleaning contractor
The official contractors may provide additional cleaning services if required in your stand.
12
B PUBLICITY & EXPOSURE
Food ingredients Asia 2014 will be promoted to a targeted audience of food
professionals this year. The campaign consists of advertisements in numerous
international and national trade journals, press releases, show previews.
Plan your campaign well in advance in order to get the most out of your investment:
Pre-show promotion: Send out visitor invitation tickets and VIP invitations (see B4-5)
Inform and invite the press (see B8-10)
Inform your colleagues and keep them up-to-date
Secure your free editorial entry in and/or advertise in the official IFI
preview (see B3), on the official show website, and your own website
On-site promotion:
Ensure your free catalogue entry (see B1) or get extra exposure by
advertising in the official show catalogue (see B2)
Make use of the items available for sponsor onsite (see Form 7)
Drop your press kits at the press office (see B8-9)
Have your own presentation on the exhibition floor (see B6 for technical
seminars)
B1 Show Catalogue Listing – Free of charge
All exhibiting companies’ contact details, company profile, and products will be
published free of charge in the official show catalogue. Make sure that your details
are enclosed, and complete FORM 2 as soon as possible. If you are sharing your stand
with another company, please complete FORM 1 as soon as possible. Both
companies will then get their own login details to the manual to submit their details
for the catalogue.
To enter your information in the catalogue free of charge, please fill out FORM 2
Deadline: 24 July 2014
To register a SHARED stand and enter your information
in the catalogue free of change please fill out FORM 1
Deadline: 30 April 2014
B2 Show Catalogue Advertising
Advertising during the show has proven to be an excellent opportunity to enhance
your corporate identity and presence during the event. The Show Catalogue has
been developed specifically for this purpose. This catalogue is a effective way to
attract visitors to your stand as they read about your company and plan their
activities for the day.
To advertise in the Show Catalogue, please fill out FORM 3
Deadline: 11 July 2014
**Logo inclusion
in the
catalogue, € 75 (see for FORM 02 for
details)
13
B3 Trade Visitor Invitation tickets – Free of charge
These invitation cards are for exhibitors’ own invitations for inviting your key clients and
prospects to Fi Asia 2014. You can order as many visitor invitations as you need.
Please complete this form and return it to us.
When used correctly, invitation tickets are one of the best promotional tools available
to you. They will not only attract your clients and prospects to the show, but will
specifically encourage them to visit your stand. Here are some guidelines to follow
when using invitation tickets:
Personal Letter
When sending the invitation cards always include a personal letter inviting your
current or prospective customers to the show. We advise you to print or stamp your
company name and stand number in the blank space provided on each invitation
ticket.
Call your invitees
Call your contacts to let them know that they have been sent free invitation tickets.
Use this opportunity to schedule an appointment with them during the show.
Use your Sales Force/Regional Offices
Make sure you order enough tickets for your local sales representatives.
To order invitation tickets, please fill out FORM 5
Deadline: 22 August 2014
B4 VIP Invitation
As a service to exhibitors, the organisers will invite your key customers to attend the
opening ceremony and exhibition as a VIP on your behalf.
To issue a VIP invitation to your key customers, please fill out FORM 6
Deadline: 22 August 2014
B5 Exhibitor Seminar
Take advantage of the opportunity to host a 30 minute or one hour presentation to
showcase your company to exhibition visitors.
Your presentation will be promoted on the event website before the event and on the
exhibition conference board on-site. These seminars are free to attend for visitors and
press.
Don’t miss this opportunity to inform your prospective clients about your latest
launches, innovations and news and then invite this audience back to your stand to
see, taste and smell your products for themselves.
To apply to host an Exhibitor Seminar, please fill out FORM 8
Deadline: 30 June 2014
14
B6 Product First Launching
If you have new products, services or innovations that will be launched at the
upcoming Fi Asia 2014 exhibition, this is your opportunity to let your buyers know.
Information supplied in this form will be used to generate publicity for your company
free of charge in the Fi Asia E-Newsletter, which will be sent to our industry database
in September 2014.
To promote a new launch, please fill out FORM 9
Deadline: 18 July 2014
B7 Media Point
The Media Point is located in front of the exhibition hall. Your company can be
represented at the Media point through your company/product press kits. More
information on how to assemble a press kit can be found in the next paragraph.
B8 How to Assemble a Press Kit
A press kit should include all materials that can essentially answer any questions an
editor could ask about your company. Your folders should include the following items:
Most recently distributed press release(s)
Company profile, fact sheet (but no sales literature)
Captioned photograph (or bromide) of CEO, products etc.
Logo sheet and instructions for its usage
Business card of your company’s media spokesperson
B9 Press Addresses
OFFICIAL MAGAZINES Company name Contact person Telephone
number
Fax number
International Food Ingredients [email protected]
Advertising: Rene Striekwold,
Email: [email protected]
+44 207921 8257
+31 20 40 99 558
+44 207921
8452
+31 20 3632616
PAN EUROPEAN/INT. MAGAZINES Dairy Industries International Editorial: Suzanne Christiansen
Email: [email protected]
Advertising: Sam Page
+44 1474 532202 +44 1474 532203
Int. Food Marketing & Technology /
Worldwide Drink Technology &
Marketing
Editorial: Mr.Ian Healy,
+49 911 2018215 +499112018100
The World of Food Ingredients Editorial: Michel Nijland
+31 263 190605 +31 263 190659
15
INDIA
Indian Spices/Spices India Editorial: Mr. P.S. Sreekatan Thampi
Email: [email protected]
+91 484 333606 +91 484 334429
USA Prepared Foods Editorial: Mr. David Feder
Advertising: Mr.Ray Ginsberg
(847) 405-4081 856-802-1345
IFT Food Technology Editorial: Mr.Neil Mermelstein
Advertising: Mr.Jack Cacciabondo
+1 312 782 8424 +1 312 7828348
Cereal Foods World Editorial: Ms.Jody Grider
Advertising: Ms.Amy Hope
+1.651.454.7250 +1.651.454.0766
Food Processing Editorial: Ms.Diane Troops
Email: [email protected]
Advertising: Mr.Jim Maddox
+1 630 467 1300 +1 630467 1179
ASIA Asia Pacific Food Industry Advertising: Peh Sue Ann
Email: [email protected]
+65 6379 2888 +65 6379 2805
Asia Biz Connection Advertising: Arresa Mekloy
Email: [email protected]
+66 2716 1722 +66 2716 1723
Food & Beverage Asia Advertising: Jaceline Tan
Email: [email protected]
+65 6746 8761 +65 6746 3649
Saffron Media Advertising: Rubysheer
Email : [email protected]
+91 22 2283 6965 +912222024261
Food & Beverage Online
(www.21food.com)
Advertising: Daisy
Email: [email protected]
+86 517 8891
5872
+8657185120489
Be Media Focus (Thailand) Advertising: Phenkhae Prawatphatthanakoon
Email: [email protected]
+66 2 586 9745 +66 2 910 0652
Food review Indonesia Advertising: Tissa
Email: [email protected]
+62 21 7021 9945 +62 21 831 0441
Ringier Trade Publishing Limited Advertising: Paige Tung
Email: [email protected]
+ 886 4 23297318 + 886 423107167
Media Matter Advertising: Karuna Chinthanorm
Email: [email protected]
+66 2 8781025 +66 2 8781025
Contineo Media Advertising: Avery
Email:[email protected]
+65 6521 9777 +65 65219788
AUSTRALIA Food Australia Editorial: Lynn Elsey
Email: [email protected]
Advertising: Stefan Worsley
Email: [email protected]
(02) 9870 8688 (02) 9870 7400
16
C RULES & REGULATIONS
C1 Promotion during the show
Exhibitors are not allowed to place stickers, signs or posters anywhere in the halls other
than within their own stand and on paid advertising poster sites and billboards. Likewise,
exhibitors’ representatives may not distribute brochures, invitations, etc. along the
gangway nor near the entrances/exits. This is unfair to other exhibitors and an
inconvenience to visitors.
C2 Demonstrations and presentations
Exhibitors who intend to make demonstration or presentations during the exhibition must
ensure that such demonstrations and presentations must not interfere with the
conducting of business of other exhibitors in terms of sound, nor cause any smoke or
fume. Loudspeakers are not allowed. Any loudspeaker to be used during the exhibition
must get written approval from the Organisers. The Organisers reserve the right to
request exhibitors to remove or dismantle loudspeakers if such an activity causes
inconvenience or annoyance to the public or other exhibitors within the vicinity of the
exhibition
Any promotional activity involving the demonstration of games, organised competitions
or quizzes will need an advance permit from the Organisers.
C3 Security
(a) General security will be provided by the Organisers round the clock. Exhibitors and
their staff will not be allowed in the exhibition hall after official hours.
(b) All personnel in the exhibition halls must wear identification badges at all times.
Exhibitor Badges and Temporary Passes are available at Exhibitor Registration on
site.
(c) To avoid any loss or damage, exhibitors with small exhibit items are strongly
recommended to carefully pack their items in proper packages/ boxes at the end
of each show day. If your displays are very valuable or sensitive and you wish to hire
security personnel to attend to your stand exclusively for off show hours, please
complete Security Service Form for security service required and return to official
security contractor. Please note that you must not use your own staff or personnel
from any other security agency.
(d) For security and safety reasons, exhibit movement in or out of the halls during show
hours is strictly prohibited.
C4 Official contractors
The Organisers have appointed official contractors for various services so as to ensure a
more efficient and regulated build-up and dismantling.
Please refer to the list of official contractors (items A10 – A14) for details. Unless otherwise
stated:
17
(a) Exhibitors may appoint their own stand fitting contractors subject to approval from
the Organisers.
(b) Guidelines for Exhibitors on the Wall Panels (Wall Partition) / Fascia Board of the
Stand
1. No modification, addition or change of any part of structure of either shell
scheme or national pavilion scheme is allowed in any case.
2. Do not spray, glue or silicone on the wall panel / fascia board
3. Do not paint, spray-paint, or write on the wall panel / fascia board
4. Do not drill, nail, perforate, tack down, staple or cause any damage to the
panels or any parts of the standard shell scheme. Should you need to affix any
exhibit or sign to the wall, please contact our Operations staff.
Note: In case of violation of the above rules, the official stand fitting contractor has
the right to fine the exhibitor for the damage caused with minimum charge of
IDR 1,000,000 /panel, depending on the damage assessed.
(c) Exhibitors are required to return all the forms to the relevant parties’ otherwise on-
site services may not be guaranteed.
(d) The services of official contractors are for the convenience of exhibitors, and the
Organisers will accept no liability in respect of any contract between exhibitors
and such contractors for the negligence or fault of any such persons, their servants
or agents.
(e) Where mechanical handling within the exhibition halls is required, only the official
freight forwarder must be appointed.
C5 Stand fitting contractors
(a) In adherence to safety requirements, only the Organisers’ official contractor can
carry out electrical power supply, compressed air supply, and water drainage &
pipe installations.
(b) Exhibitors may appoint their own contractor for stand design and construction,
subject to them being approved by the Organisers, and if approved, contractors
must lodge a deposit of no less than IDR 5,000,000 (or equivalent to USD 588) per
stand with the Organisers, to serve as a performance bond as well as damage
deposit. The deposit, calculated at IDR 300,000 per sqm but subject to a
minimum of IDR 5,000,000 per stand, will be refunded to the Contractors within 7
(seven) business days after the exhibition closes should no damage is found at
the site of stands the respective contractors worked on. In case of damage
found, the deposit will be forfeited and if damage exceeds the deposit, the
contractors are obligated to indemnify the Organisers for the full amount of
damage reimbursement.
Contractors should submit this deposit by company check only. DO NOT pay
cash or remit to the organisers.
All stand contractors must be registered and paid deposit to be able to collect
their working passes, which must be worn at all time to gain access to the
exhibition hall and work on their construction.
18
Working passes are issued free of charge. Contractors are required to preserve
their set-up day passes for use during the dismantling days. No new passes will be
issued for dismantling days.
(c) Exhibitors are responsible and liable for their appointed contractor’s observance
of all rules and regulations.
All contractors working in the exhibition hall must observe safety procedure for
the benefits of everyone. No smoking will be tolerated in the exhibition hall. Any
contractors found smoking in the exhibition hall will cause the damage deposit
forfeiture.
During the process of installation, construction and
removal of stands, the gangways must not be used at
any time for the storage of plants, materials or debris
of any kind. The organisers may at their discretion
order the removal of such objects and the exhibitors /
contractors will be liable for the cost of removal.
Contractors must have any exposed stand surfaces neatly finished unless the
surface is facing the outer wall of the exhibition centre. The organisers reserve the
right to order modification of any exposed surface and the contractor shall be
responsible for the cost. Exhibitors/contractors are not allowed to put advertising,
logos, signs etc on any rear surface of their stand when this faces or is adjacent
to other exhibitor’s stand.
(d) For double storey structure, 50% of the amount based on floor space will be
imposed. Design and size need to be submitted to the Organisers 8 weeks before
the move-in date for written approval. If you fail to do so, the Organisers cannot
guarantee availability of this service.
C6 Stand boundaries and design restrictions
Exhibitors are not allowed to place any display materials or exhibits, nor extend their
stand structures and fittings, beyond their contracted boundary.
Each booth needs to have its own panel and it is not permitted to use the neighboring
stand. Raw space exhibitors are required to submit design’s drawing to the Organisers
for approval
19
Standard height of stand for space only is 3.5 metres.
Permitted stand height is maximum to 5 metres subject to approval of design and
layout by the Organisers. Any design for a structure exceeding 3.5 metres in height
must be submitted to the Organisers for approval at least 5 weeks prior to the show and
approval will be given on a case-by-case basis.
If approved, each side of the stand exceeding 3.5 metres height must be no wider
than 1/3 of its area and must be distanced to 1 metre away from neighboring stand.
Logos and branding are not permitted on the rear face of partition walls when these
walls overlook neighbouring stands and must be properly covered up with suitable
material.
Island booths are not allow to construct a full wall.
The Organisers reserve the right at any time to order the alteration or removal of any
stand which differs from the approved specifications or which does not conform to the
Rules and Regulations. The costs of such alteration and removal shall be entirely borne
by the exhibitor and any sums of money which may have been paid by the exhibitors
for rent and charges shall not be refunded.
Open frontages: All stands in the exhibition, irrespective of height, must have at least
half of any frontage facing an aisle opened or fitted with transparent material to the
underside of the fascia if the design so requires.
Obstructing gangways: No part of any stand or exhibit, including fascia, signs, lighting,
corner posts, etc. shall project into or over the gangway or obscure any fire or exit signs
and the Organisers reserve the right to remove any such item. It is strictly forbidden to
build across gangways.
20
Double-storey stands: In addition to the requirements of single-storey stands, double-
storey stands must have the following requirements:
Design and size need to be submitted to the Organisers 3 weeks before show for
written approval. Such design must be endorsed by certified engineer. If you fail
to do so, the Organisers cannot guarantee availability of this service.
For double-storey stands, the actual allotted area in the upper storey is
calculated at 50% of the price per square metre of floor area
A double-storey construction is only permissible for stands covering at least 60
sq.m. and the upper storey can only cover up to 50% of the space.
The total height of the stand cannot exceed 5 metres. Signs or advertising
statements or logos can only be attached up to a height of 5 metres.
Ground level plan view, showing clearly all dimensions, walling and major exhibits.
Upper storey plan view, showing clearly all dimensions, walling and major exhibits
plus walkways, means of escape and areas of public access.
Elevation view and any appropriate sections showing clearly all dimensions,
graphics, etc.
Plan giving details of staircases and all steel works
Structural calculations and drawings proving structural stability, weight loading
etc. being endorsed by a certified engineer.
Utilizing Air Space:
Hall D1 & D2: Any hanging construction or banner is NOT allowed in these halls
due to the venue facilities.
Hall A3: To utilize air space for hanging banners and construction, IDR 1,500,000
per sqm (minimum 10 sqm.) will be applied and will be subject to 10% VAT (all
materials & production are excluded). This service allows a banner or construction
to be hung at the top of a booth, and within the catwalk line only. The height
restriction is not over 7 metres (from the floor to the top of the banner or
construction). Design and size need to be submitted to the Organisers 3 weeks
before the show for written approval. Failure to do so, means the Organisers
cannot guarantee the availability of this service.
C7 Power supply and lighting
(a) All electrical installation work at the exhibition must be carried out solely by the
Organisers’ official contractors.
(b) Exhibitors requiring special arrangements (e.g. different voltages and frequency
or special connections to equipment) must arrange for their own transformers,
converters, etc.
(c) All electrical equipment must be tested by the Organisers’ appointed licensed
engineers prior to turning on the electricity supply.
21
C8 Stand cleaning
During the exhibition days, the Organisers will be responsible for general cleaning of
exhibition halls, and exhibition stands prior to the opening of the exhibition and daily
thereafter. During the
build-up and dismantling periods, independent contractors appointed by the exhibitors
are responsible for the removal of their own stand building/dismantling materials and
rubbish. Disposal of contractor’s waste materials by the Organisers will result in the
contractor’s deposit being forfeited.
C9 Exhibits move-in
Cargo which is moved directly to the exhibition site should NOT arrive at the exhibition
hall earlier than 13 October 2014 or before the build-up period.
Exhibitors, and their agents or contractors are responsible for the early installation of
their heavy or large exhibits according to the move-in schedule provided by the
Organisers. When stand structures are erected, it may not be possible to move-in. All
cases should be clearly marked with the following:
FOOD INGREDIENTS ASIA 2014 Jakarta International Expo
Name of Exhibitor :
Stand No. :
Case No. :
Gross Weight/Net Weight :
Dimensions :
Please note that where mechanical handling within the exhibition halls is required, the
official freight forwarder must be appointed. Forklifts, cranes and pallet trucks from
other forwarders will not be allowed inside the exhibition halls.
If any heavy or large exhibits arrive on site requiring mechanical aid for onsite
installation, the Organisers will appoint the official forwarder to be the site installation
contractor on the exhibitor’s behalf, and all costs incurred will be borne by the
exhibitor.
C10 Customs requirements
Temporary import facilities are available. Full details may be obtained from the official
freight forwarder.
C11 Storage
Direct arrangements should be made with the official freight forwarder. Otherwise,
exhibitors must arrange for their empty and non-usable cartons and cases to be
transported back to their own premises.
22
C12 Working exhibits
(a) Moving machinery must be fitted with safety devices when the machines are in
operation. These safety devices may be removed only when the machines are
disconnected from the source of power.
(b) Working machines must be placed at a relatively safe distance from the
audience. We strongly recommend the use of safety guards.
(c) All pressure vessels or equipment under pressure must conform to the safety
standards & regulations. Approval for their use is required.
(d) No motors, engines, contrivances or power-driven machinery may be used
without adequate protection against risk of fire.
C13 Dangerous materials
(a) No naked lights and lamps or temporary gas or electrical fittings may be used in
the exhibition halls. Neon lights will need prior approval before the exhibition.
(b) No explosives, petrol, dangerous gases or highly inflammable substances are
allowed in the halls.
(c) No radioactive materials are to be used.
C14 Insurance
The Organisers do not cover in their service insurance for exhibitors’ goods or personnel.
Any loss or damage of exhibit items or belongings will be under own care of exhibitors.
Exhibitors are also required to have insurance coverage for their exhibits, personnel and
contingent liabilities and to provide the Organisers with copies of insurance policies
prior to move-in date.
Insurance - FORM 12
Deadline: 22 August 2014
C15 Damage to stand structures and exhibition premises
No person under any circumstance shall cut into or through any floor covering or wall
nor alter any stand service structure except as authorized in writing by the Organisers.
Any such damage to stand service structures will be invoiced to the exhibitor.
C16 Payment terms and conditions
a) All payments must be made in accordance with the terms and methods of payments
set out on the Contract Form.
b) In the event the exhibitor fails to meet any such payment obligations (whether as to
the amounts or date of payment) then the Organisers reserve the right to cancel its
contract with the exhibitor and to resell or reallocate the stand space allocated to
the exhibitor and the provisions of paragraph C17 below relating to cancellation
charges shall apply.
23
C17 Cancellation of exhibition space
17.1 If serious circumstances dictate, whether dependent or independent of UBM Live,
UBM Live has the right to cancel the Exhibition and/or the related Contracts
immediately without prior warning. The Monies already paid by the Exhibitor to UBM
Live will be refunded to the Exhibitor, minus a deduction for the costs incurred by UBM
Live, which may not exceed 15% of the agreed monies. Apart from the
aforementioned refund, the Exhibitor is not entitled to claim compensation or
damages.
17.2 If the Exhibitor is in breach of the Contract including the General Conditions and the
Publicity and Technical Manual, UBM Live may cancel the Contract immediately
without prior warning. In case of such cancellation, the monies remain payable by
the Exhibitor in accordance with the provisions set out in Article 17.6
17.3 If the Exhibitor has not taken up the use of the stand space 48 hours before the time
at which the Exhibitor is due to be opened to the public, or if the Exhibitor stated prior
to this time that it will not be taking up the space allocated to him, the Contract is
automatically cancelled and the Exhibitor forfeits all right to the allocated display
space and stand without further notice or proof of default. The monies remain
payable by the Exhibitor in accordance with article 17.6 below. The Exhibitor is not
entitled to claim compensation or damages.
17.4 The Exhibitor is entitled to cancel the Contract at any time. In case of such
cancellation, the monies are payable by the Exhibitor in accordance with the
provisions set out in Article 17.6 below.
17.5 In case of any cancellation of the Contract, for whatever reason by the Exhibitor or
UBM Live, UBM Live shall have the absolute discretion (but without prejudice to any
other right or remedy available to the Organisers) to reallocate or resell the display
space and stand allocated to the Exhibitor and to charge the Exhibitor the monies in
accordance with the provisions set out in Article 17.6.
17.6 Once the Contract has been concluded and the Contract is cancelled from the
date UBM Live received the Contract up until 180 days prior to the start of the
exhibition, the Exhibitor shall be liable to pay 50% of the monies. If the Contract is
cancelled after 180 days prior to the start of the Exhibition, the monies are payable in
full by the Exhibitor. UBM Live is entitled to charge the Exhibitor for any extra costs
which UBM Live may incur by fitting out the stand space which is not being used. In
the event the Exhibitor has already paid the monies to UBM Live, UBM Live will refund
the monies to the Exhibitor in accordance with this provisions.
17.7 The notice of cancellation must be made in writing and sent by registered letter. The
posting date will serve as the reference to calculate the cancellation charges.
C18 Failure to exhibit
Any organisation, having signed a contract for a stand, that fails to exhibit and has not
been released from the contract by the Organisers, will be liable for the full costs stated
in the contract plus any additional costs incurred by the Organisers as a result of the
failure to exhibit.
24
C19 Exhibitor information pack
All exhibitors should register at the Exhibitor Registration Counter on arrival at the
exhibition centre to collect their badges and exhibitor information pack. Necessary
information including special functions will be included in the Information Pack.
C20 Groups and national groups
Organisers of groups and national pavilions are responsible for ensuring that all
exhibitors on their stand are fully aware of and agree to abide by these rules and
regulations.
C21 Sales
As this is a trade exhibition, “Over The Counter” sales are not permitted without
approval.
C22 Unforeseen occurrences
In the event of any occurrence not foreseen in these Rules and Regulations the
decision of the Organisers shall be final.
For safety reasons, if the average weight per square meter of your exhibit(s) is more
than the specified floor loading, a suitable platform must be laid underneath your
exhibit(s). It is therefore compulsory and important that details of your exhibit(s) are
given to the Organisers well in advance for such preparation.
C23 Word of caution
No exhibitor may alter or in any way affect the structure or fixtures of the Exhibition
Centre. It is important that maximum care is taken by all parties while working in the
centre. Any damages caused by ignorance to Organisers’ regulations are disclaimed.
C24 Venue rules & regulations
With your cooperation in adhering to the guidelines listed below, we can all benefit
from maintaining the highest possible standards of cleanliness and quality for your
event.
Restricted Area For your safety, Fire Hoses, Exits, Lifts, Ramps and Public Areas
must remain clear of any obstruction at all times.
Lease Area Construction work should be done within the area specified in
the lease agreement.
Floor Covering For the protection of the Jakarta International Expo’s
carpeting, appropriate materials are needed to cover areas
where painting and construction occur. Our staff will be happy
to assist you with this important matter.
Paint Spraying Paint spraying is prohibited in the building.
25
Electrical Equipment For your safety, electric saws, welding and drilling equipment
which emit sparks are not allowed to be used in the building.
Identification For the security of your event, all organisers, contractors and
subcontractors must have identification. Please consult with the
show organisers for assistance
Working Hours Construction work and dismantling time must be in
accordance with the lease agreement. Please consult with the
Organisers for scheduled times.
Forwarding Construction equipment is allowed to be transferred to the
building only on set-up and tear-down days.
Cleaning Cleaning of internal surfaces of exhibition stands, including
exhibits are not provided by the venue.
Foods / Beverage No outside food and beverage are allowed into the venue
without prior permission from the venue management. Please
contact the Organisers for details.
Smoking The Jakarta International Expo exhibit halls and indoor pre-
function are non-smoking areas. Smoking may be done in the
outdoor area away from the crowd.
26
D FREIGHT FORWARDING and SHIPPING
INFORMATION
Shipping tariff
DOCUMENT DEADLINES (No. of days before consignment arrivals)
Sea freight (Doc – Sea) 14 days before cargo arrived at Jakarta Port
Airfreight (Doc – Sea) 7 days before cargo arrived at Jakarta Port
CONSIGNMENT DEADLINES
Sea 01st October 2014 - 30% Surcharge if late arrival
Air 05th October 2014 - 30% Surcharge if late arrival
Video Tapes 15th September 2014
SEA – Basic Handling Charge US$ 110.00 per cbm
Minimum Charge LCL Minimum 3 cbm
FCL 20’ 20 cbm per 20’ container
FCL 40’ 40 cbm per 40’ container
FCL 45’ 45 cbm per 45’ container
Grounding/Reloading US$100.00/20’ cont US$200.00/40’ cont
AIR - Basic Handling Charge US$250.00 for First 50kg per consignment per exhibitor
Additional Kg US$1.50/kg per consignment per exhibitor
VIDEO TAPES – Handling
charge US$ 30.00 per piece per exhibitor
Heavylift Surcharge From 2001 – 3000 kg US$ 30.00 per 1000 kg
From 3001 – 4000 kg US$ 40.00 per 1000 kg
From 4001 – 5000 kg US$ 50.00 per 1000 kg
5001 kg and above, an individual quote will be given
Tariff Exclusions Consignment service charge at US$125.00
Documentation at US$100.00 / exhibitor
A customs escort fee at US$30.00 / MAWB / BL
Communication charges at US$35.00 / MAWB / BL
Consumed items for non-return exhibits at US$125.00 / exhibitor
Port / Airport related charges - at cost
NOTE: The same charges will be applied for the outbound movement.
Exhibitors or their appointed freight agents should contact the official freight
forwarder to obtain full shipping instructions & tariff.
27
D2 Temporary importation for exhibition goods
1. Goods are allowed to import into Indonesia for trade exhibitions as temporary
importation. Goods must be re-exported within 1 month for both air cargo and sea
cargo from the closing date of the exhibition.
2. The exhibition venue is a customs bonded site. Only the appointed forwarder may
clear cargo under this facility.
3. For smooth clearance of exhibitor’s exhibition goods, the Organisers have
appointed the Official Freight Forwarder to provide their professional services.
4. Exhibitors are suggested to contact the Official Freight Forwarder for details of
shipping instruction and handling rates for clearance of exhibition goods.
5. Please do not consign the exhibition goods to the Organisers, your hotel or other
forwarders in Jakarta as it will cause delay and extra expenses for customs
clearance.
DOCUMENT DEADLINES
The following documents must be received by the freight forwarder not later than the
deadlines shown below or at least 7 (seven) days prior to the arrival of vessel or flight in
Jakarta.
16th September 2014 Copies of Bill of Lading and Commercial Invoice and
Packing List for sea freight consignments must be
received by the freight forwarder for processing prior to
the arrival of vessel.
26th September 2014 Copies of Airway Bill and Commercial Invoice and
Packing List for airfreight consignments must be
received by the freight forwarder for processing prior to
the arrival of flight.
CONSIGNMENT DEADLINES
All exhibition goods must arrive in Jakarta not later than:
1st October 2014 Sea freight consignments
5th October 2014 Airfreight consignments
For all consignments, an email pre-alert shall be sent to the freight forwarder indicating
the vessel name, flight numbers, Bill Of Lading/Airway Bill numbers, number of
packages, weights and dimensions upon uplift of goods.
DOCUMENTATION
For sea freight consignments, the following documents are required:
2 originals and 3 copies of Bill of Lading
5 copies of Commercial Invoice
5 copies of Packing List
1 set of Product catalogues
For air freight consignments, the following documents are required:
2 originals and 3 copies of Airway Bill
5 copies of Commercial Invoice
5 copies of Packing List
1 set of Product catalogues
28
CASE MARKINGS:
All packages shall be marked as follows;
FOOD INGREDIENTS ASIA 2014
Jakarta International Expo, Jakarta Indonesia
Name of Exhibitor :
Stand Numbers :
Hall Numbers :
Case Numbers :
Gross Weight/Net Weight :
Dimension (W x L x H) :
Exhibitors with large or heavy items to be brought into the hall should contact the
Official Freight Forwarder as early as possible to ensure that adequate lifting services
can be made available.
D3 On-site handling rates and services
The Organisers have appointed one (1) Official Freight Forwarder as the official on-site
handling contractor to perform all onsite handling of exhibition goods. To avoid any
damage and congestion in the exhibition hall, the Organisers will not allow other freight
forwarders to move in/out exhibition goods with their own handling equipment.
Exhibitors are required to contact the on-site official freight forwarder for their services
(Please see details in Shipping Instruction Section)
29
E1 ORDER FORMS- Exposure & Publicity Deadline Order form
30 April 2014 FORM 1
Sharing companies on your stand If you have other companies sharing your stand, please fill in this form.
This will enable them to get a free catalogue entry as well.
24 July 2014 FORM 2
Free catalogue entry Your company details and profile will be included in the show
directory free of charge
11 July 2014 FORM 3
Show catalogue advertising
22 August 2014 FORM 4
Exhibitor name badges Here you can order badges for the personnel that will be manning the
stand.
22 August 2014 FORM 5
Trade visitor invitation tickets Invite your customers by sending out this folder with information and a
registration form.
22 August 2014 FORM 6
VIP nomination form If you would like the Organisers to send the VIP invitation card to your
VIP visitor, please fill this form.
19 September
2014 FORM 7
Sponsorship Get optimal exposure by sponsoring banners, signage, visitor give-
aways or feature area’s.
30 June 2014 FORM 8
Exhibitor showcases Share news or information share with key clients, press and prospects:
conduct a meeting or hold a presentation by ordering a Sponsored
session package. You benefit from promotional activities and
organisational support by CMP Information.
18 July 2014 FORM 9
First launching If you have any new products or services or innovations that will be
launched at the upcoming Food ingredients Asia 2009 exhibition, this is
your opportunity to let your buyers know. Information supplied in this
form will be used to generate publicity for your company free of
charge in the Fi Asia E-Newsletter, to be sent to our Food industry
database in July
Note: Any exhibitors confirming their participation in the exhibition after the expiry of the above
deadlines must treat these dates as “ IMMEDIATE ”
30
E2 ORDER FORMS - Operational Matters
Deadline Order form
22 August 2014 FORM 10 Stand construction
22 August 2014 FORM 11 Directory map board
22 August 2014 FORM 12 Insurance
22 August 2014 FORM 13 Shell scheme name board
5 September 2014 FORM 14 Furniture and accessories
5 September 2014 FORM 15 Lighting & electrics
5 September 2014 FORM 16 Audio visual equipment
22 August 2014 FORM 17 Compressed air
22 August 2014 FORM 18 Water supply & drainage
To be confirmed FORM 19 Refrigerator Equipment
22 August 2014 FORM 20 Telephone service
22 August 2014 FORM 21 ADSL & WiFi
22 August 2014 FORM 22 Security& CCTV service
22 August 2014 FORM 23 Cleaning service
To be confirmed FORM 24 Plant & floral service
22 August 2014 FORM 25 Heavy & large exhibits
22 August 2014 FORM 26 Temporary staff
22 August 2014 FORM 27 Hotel reservation
22 August 2014 FORM 28 Visa application
Note: Any exhibitors confirming their participation in the exhibition after the expiry of the above
deadlines must treat these dates as “ IMMEDIATE ”