Welcome

83
1 Welcome Region 3B CSENet Training “PARTS OF THE CSENET PUZZLE” May 24, 2005 DeKalb County Public Library Presented by Dianne Ashe, Policy Specialist, Region 3B

description

Welcome. Region 3B CSENet Training “PARTS OF THE CSENET PUZZLE” May 24, 2005 DeKalb County Public Library. Presented by Dianne Ashe, Policy Specialist, Region 3B. First things first. Please take a minute and make the following corrections to your training manuals: Page 8 Change - PowerPoint PPT Presentation

Transcript of Welcome

Page 1: Welcome

1

Welcome

Region 3B CSENet Training

“PARTS OF THE CSENET PUZZLE”

May 24, 2005DeKalb County Public Library

Presented by Dianne Ashe, Policy Specialist, Region 3B

Page 2: Welcome

2

First things firstPlease take a minute and make the following corrections to your training manuals:

Page 8Change“While a UIFSA code is not needed when sending an L01 or CSI transaction, it is important for data reliability

purposes.”To“While a UIFSA code is not required to send a CSENet transaction, it is important for data reliability purposes.”

Page 23Under EST, first bullet under “What actions will the Georgia user or $TARS take”Change “a paternity” to “an establishment”

Page 255th bullet, Remove “Cancel”—it is not an option for MSC

Page 26Remove “outgoing and” from “Example of MSC P outgoing and incoming transactions on View Assigned

Transactions screen.”

Page 40To add MSC GIHER to auto transactions when court date is entered to the Court Tracking Screen.Action Taken $TARS Screen Function/Reason CodeNew Court Date Legal-Court CalendarTracking MSC GIHER

Page 3: Welcome

3

Refresher CourseSince most of the staff in Region 3B have attended at

least one CSENET training class, we aren’t going to focus on every little transaction detail.

Instead, this class is designed to show you how to make the pieces of the interstate caseload and CSENet puzzle fit together.

It is mandatory that all GA OCSE offices use CSENet to communicate case management processes with other states having CSENet agreements.

Page 4: Welcome

4

MANDATORY WHY?Information contained in a memorandum from Alfreda Moore dated October 25, 2004 to all Central Registry Managers and CSENET Coordinators:

Dear Colleague

As part of our ongoing commitment to improve case information sent to other states, Georgia Central Registry will implement the use of CSENET, in order to provide quick and accurate exchange of data between states. To insure successful implementation and to standardize transactions all child support agencies with the capabilities of handling an interstate case by electronically transmitting information, will be expected to communicate in this manner. Please make sure all child support offices within your state receive a copy of this letter. This change will become effective 30 days from the date of this letter.

If you have any questions, comments or concerns, please do not hesitate to contact Alfreda Moore (404) 657-3874 or [email protected].

Page 5: Welcome

5

FEDERAL TIMEFRAMES – the following was taken from Assessment Procedure 1000:

Initiating State: Within 20 calendar days of locating the NCP in another state or obtaining all information necessary, prepare and submit an appropriate

UIFSA packet to the responding state’s central registry.

Respond to the other state within 30 calendar days of receipt of a request.

Upon receipt of new information on a case, notify the responding state of such information within 10 business days.Within 20 calendar days of receiving a request for review & adjustment (from CP), take appropriate action under UIFSA statutes (Agent

Enforcement Manual Procedure 950).

Responding State:Within 10 business days of receipt of an interstate IV-D case, Georgia’s Central Registry must take appropriate action and acknowledge

receipt of the case and forward the case to the appropriate local jurisdiction.

Once the local office receives the case, they are to work under the appropriate federal in-state timeframes for the case. In other words, if the case needs an order established, then the local office has 90 days to complete as per federal in-state guidelines.

If information, documentation, etc, is needed from the initiating state, then Georgia must request this and follow up as needed.

Complaints or unresolved inquiries from other states must be responded to within 5 working days. These will usually come through central registry.

Within 10 business days of receipt of new information, notify the initiating state of that new information. This includes but is not limited to a new address, court date, genetic testing information, court order entered, etc.

Within 2 business days of receipt of collections, forward any support payments to the initiating state.

The section on “Automatic Updates” beginning on page 40 in your training manual shows what ‘new information’ $TARS will send to assist in meeting the ten-day timeframe.

MANDATORY WHY?

Page 6: Welcome

6

1. GA OCSE has directed all other states to use CSENet when communicating with Georgia

2. In order to meet Federal time frames

3. It just makes good sense – more efficient case management

MANDATORY WHY?

Page 7: Welcome

7

Parts of the CSENET puzzle

How the pieces fit together

ICR

Acrobat

CSENET

FIPS

CASEID

FCR UIFSA

Page 8: Welcome

8

Vocabulary

• UIFSA • FIPS• Case Identifiers• FCR• ICR• CSENET

• Function Types• Action Codes• Reason Codes• Acrobat

Page 9: Welcome

9

UIFSA DEFINITIONUniform Interstate Family Support Act

Laws enacted at the State level to provide mechanisms for establishing and enforcing child support obligations in interstate cases (when a non-custodial parent lives in a different State than his/her child and the custodial party).

• Interstate Case: Cases in which the dependent child and non-custodial parent (NCP) live in different States, or where two or more States are involved in some case activity, such as enforcement.

• Initiating UIFSA: The State or county court, or administrative agency, which sends a request for action to another jurisdiction in interstate child support cases. Georgia is the Initiating UIFSA when the custodial parent lives in Georgia.

• Responding UIFSA : The court or administrative agency with jurisdiction over a non-custodial parent or child support order on which an initiating State has requested action. Georgia is the responding UIFSA when the NCP lives in Georgia.

Page 10: Welcome

10

UIFSA TYPE

EXPLANATION OF CODES

1. II - UIFSA INITIATING For paternity and/or establishment of an order when the NCP lives in another state

2. IN - IN-STATE NON-URESA Use when no other IV-D Agency involved in case3. IR - UIFSA RESPONDING Use when GA receives a request from another state and NCP lives

in GA4. IU - IN-STATE URESA No longer needed, may be valid for older cases.5. NI - INTERSTATE NON-URESA INITIATING Use when GA sends Enforcement Transmittal for

IDO, Registration of existing order, or enforcement of existing order when NCP lives in another state (not when full UIFSA petition is sent). Descriptive label will be changed to UIFSA Initiating Enforcement Transmittal.

6. NR - INTERSTATE NON-URESA RESPONDING Use when GA receives Enforcement Transmittal for IDO, Registration of existing order, or enforcement of existing order when NCP lives in GA (not when full UIFSA petition is received). Descriptive label will be changed to UIFSA Responding Enforcement Transmittal.

7. UI - URESA INITIATING Used on old cases that were filed under URESA when the NCP lives in another state

8. UR - URESA RESPONDING Used on old cases that were filed under URESA when the NCP lives in GA

Note: If there is a UIFSA Type code of II or UI then no FIW (Federal Income Withholding Order) will generate.

Enter the correct UIFSA type into $TARS. This code can be entered through either the Case Management/Case Summary/Case Management screen or the Federal Interfaces/CSENet/Case Information Screen.

Page 11: Welcome

11

FIPS CODES

Federal Information Processing Standard

A unique code that identifies the child support jurisdiction, (i.e., States, counties, central state registries). Codes ending in 0 – 4 represent state disbursement units. Codes ending in 5 – 9 represent local offices and should be used for correspondence. FIPS codes are maintained on a database that is updated routinely with changes, such as name, address, or phone numbers.

Page 12: Welcome

12

Proper use of FIPS codes Corresponding & Pay FIPS

The Payee FIPS code on the Support Order screen and the Pay FIPS/Corresponding FIPS codes on the Case Summary/Case Management Screen do not have to match as they are not used for the same purposes.

– Corresponding FIPS code on the Case Summary/Case Management screen determines where correspondence is sent in interstate cases, is used for DocGen purposes, and to generate automatic MSC transactions to CSENet states that accept MSC transactions from Georgia.

– Pay FIPS on Case Summary/Case Management screen does not have to be populated on in-state cases. On interstate cases put in the other state’s universal FIPS code, meaning the first 2 numbers followed by zeroes. If you know the FIPS code of the actual office, put it in.

Each FIPS code represents a child support agency or disbursement unit. When the address of an agency changes, the FIPS code database is updated to include the correct address. This prevents case management information from being sent to an incorrect address.

Physical addresses should only be used when the custodial parent lives in a country for which the US Postal Service requires additional postage. Cases of this nature should have the local office address in the account address fields and should include the notation “Do Not Post” and the custodial parent’s name. These payments are mailed to the appropriate recipient by local accounting staff.

Page 13: Welcome

13

A FIPS code is required for all CSENET transactions

The FIPS code will be one of the following:

The 2-digit state code plus 5 zeros when sending a L01 or an initial EST, ENF or PAT transaction. Example: FIPS code when sending L01 to FL will be 1200000

• The 2-digit state code plus 3-digit county code plus 2-digit code identifying local office address when sending future transactions. Example: FIPS code when sending MSC to Arcadia, FL is 1202705

• The FIPS code is the “Corresponding FIPS” found on the Case Management screen. This is the same FIPS found on the CSENet/Case Information Screen in “Other FIPS Code” field. The FIPS code can be updated on either of these screens.

Page 14: Welcome

14

FIPS Code designation example:

1313502

13 – State code

135 – County code

02 – Local office code

Page 15: Welcome

15

Throw out your old paper copy of FIPS codes

Your first action after viewing this training:

FIPS codes can be found by viewing the Interstate Roster Guide (IRG) or by using the Search FIPS feature on $TARS.

Page 16: Welcome

16

The IRG web address is:

http://ocse3.acf.dhhs.gov/ext/irg/sps/selectastate.cfm

The IRG web address can also be accessed by going to Resources on the GA OCSE website:

Page 17: Welcome

17

To obtain information on FIPS codes sign on as a State User.

User Name is Georgia (case specific) and Password is Peach (case specific)

Click on Login

Click on FIPS/Addresses and select appropriate state

The IRG web site sign-on screen:

Page 18: Welcome

18

Under Select Address Type, Click on County

Search by County or CityInformation provided will

be the 2-digit state code for the State and 3-digit county code. (Georgia uses 7 digits. To identify the complete FIPS code to use in $TARS, use the FIPS Search feature.)

For more information regarding FIPS codes, refer to the information beginning on page 5 in your training manual.

Page 19: Welcome

19

OTHER STATES’ CASE IDENTIFIEROR CASE NUMBER

With the exception of L01 and initial Establishment, Paternity or Enforcement requests, the other state’s case number is required to submit and receive transactions. The Federal Case Registry/Interstate Case Reconciliation Case ID Matrix is shown beginning on page 54 in your training manual. The matrix provides examples of Case ID’s used by other states. It is important to enter the correct case number on $TARS.

$TARS should enter the other state’s case number into the appropriate fields on both the Case Management and CSENet Case Information screens when a transaction is received. If it does not, enter the number manually. If an old case number is on the system, $TARS may not overwrite it with the correct one.

It is also important Georgia users provide the other state with our correct case number. If a new case is established due to an APID, CPID correction or for any other reason, notify the other state of the new case number. CSENet is a case-processing tool based on a specific case number. If the case number changes, no auto updates will be sent on the new case and prompts and information will continue to be received on the old, closed case.

Page 20: Welcome

20

Check here

Checkhere

Checkhere

Page 21: Welcome

21

How do the UIFSA, FIPS code and Case Identifier puzzle pieces fit?

ICR

Acrobat

CSENET

FIPS

CASEID

FCR

UIFSA

Page 22: Welcome

22

FCR

FEDERAL CASE REGISRY and FEDERAL PARENT LOCATE SERVICE (FPLS)

The Federal Case Registry (FCR) is a database, which contains basic case and participant data from each of the State Case Registries (SCRs). As part of the Personal Responsibility and Work Opportunity Reconciliation Act (PRWORA) of 1996, each State must implement a State Case Registry (SCR) and establish an interface to the FCR that will automatically transmit and receive child support information for all IV-D cases and non IV-D orders entered or modified after October 1, 1998.

In Georgia the State Case Registry (SCR) is actually $TARS. There is a separate database where Non IV-D information is registered by the FCSU.

Page 23: Welcome

23

The Federal Case Registry (FCR) contains state Child Support Enforcement (IV-D) and non IV-D case data and serves as a pointer system to help locate persons across state lines. FCR involves computers talking to computers. There is no human intervention.

Person data in the FCR are matched daily against employment data in the National Directory of New Hires (NDNH) and sent to states to facilitate case processing and increase collections, especially through automated income withholding. Additionally, matches are sent to states to inform them if a IV-D case participant in their state appears as a participant in a IV-D or non IV-D case in another state.

The FCR also serves as the conduit for matching against the following sources: Social Security Administration (SSA), Department of Veteran Affairs (VA), Department of Defense (DOD), Federal Bureau of Investigation (FBI), and Internal Revenue Service (IRS). Matches made through the Multistate Financial Institution Data Match (MSFIDM) are returned to states through the FCR.

FCR

Page 24: Welcome

24

Although the information contained in the FCR is from the states’ SCR, the FCR is not a duplication of all of the data maintained in each State’s child support system.

The FCR provides basic information to facilitate interstate case processing. It also provides proactive matching against the National Directory of New Hire (NDNH). The FCR assists states in locating individuals that reside in different states to establish, modify, and/or enforce child support obligations.

The data elements listed below are found in the FCR:• Name• SSN• sex, and date of birth• Participant type (CP, NCP, Child)• Case type, case status, case number, and client ID number• Order indicator (is there a support order)• Family Violence Indicator (if applicable)

Note: Data elements for clients with Family Violence Indicators are suppressed.

FCR

Page 25: Welcome

25

You will not receive specific information from the FCR concerning case information from another state. You will only receive information that a particular state has information on the participant.

FCR is just an indicator or pointer for workers to know that information is contained in another state’s child support system. When a State sends the FCR information about persons in a new case or child support order, this new information is automatically compared to the existing person’s information in the FCR. If a match is found, the Federal Parent Locate Service (FPLS) notifies all appropriate States of the record match. Thus, a State will know if another State has a case or support order with participants in common with them, and can take appropriate action.

In Georgia, if the case number and SSN provided by FCR matches “Other State’s case #” on the Case Management screen and SSN in CRS, the proactive match will be deleted; therefore, the user will not receive a prompt. If the case number or SSN do not match, information will appear on the FCR Proactive Match Response screen and the user will receive a prompt.

FCR

Page 26: Welcome

26

FCR

Page 27: Welcome

27

FCR

Page 28: Welcome

28

ICR

National Interstate Case Reconciliation

Detailed information can be found in the National Interstate Case Reconciliation (ICR) User Guide, Document Version 1.0, MAY 10,

2004 at:

http://www.acf.hhs.gov/programs/cse/newhire/library/nicr/ug/4.htm

Page 29: Welcome

29

• The ICR provides your state with results derived by comparing your state’s interstate cases with other states’ interstate cases. Compared state caseloads include both open and closed cases. The matching results show whether the data maintained on your state’s system for each interstate case are accurate, or whether discrepancies exist. If discrepancies exist, you receive corrected data or sufficient information that allows you to evaluate the next appropriate action to resolve each discrepancy.

• A major outcome for the ICR is to provide each state with correct case identifiers (case IDs) for the other states with which interstate cases are shared. If the case ID you have for another state is different than the case ID used by the other state, the ICR identifies the discrepancy and provides you with the correct case ID that should be used for interstate communication. This is the most significant benefit of the ICR.

• ICR matches case and participant data submitted by your state for all of your open and closed interstate cases against the case and participant data submitted by the other states participating in the national ICR.

ICRThe following was taken from the National Interstate Case Reconciliation User Guide,

Document Version 4.0, January 31 , 2005 :

Page 30: Welcome

30

First, the ICR process uses the state code (e.g., 02 = Alaska) and the case ID you have for the other state to try to find an interstate case that corresponds to your interstate case. Then, if the match routine finds a corresponding interstate case in the other state's ICR file, it checks for a match on county code, case status, and SSN or name for each participant on your interstate case.

If the case ID you have for the other state's case cannot identify a corresponding case, then the ICR process looks for a child in common between your case and a case in the other state's ICR file.

The match routine assigns Reason Codes to identify data discrepancies and to indicate the extent to which critical data match between your interstate case and the other state's interstate case. Results are returned for each person submitted on your interstate case.

The national ICR offers an important first step by reconciling interstate cases and, as stated above, by providing correct other state case IDs. As part of the ICR effort, case IDs were analyzed to evaluate what states were using as a case ID in all forms of external communication. This initial analysis, which was a collaborative OCSE/state effort to address case ID inconsistencies, has led the way to standardizing how each state consistently uses its case IDs for interstate and intergovernmental communication. The standardization of case IDs establishes a foundation for better communication to occur among the states, and facilitates ongoing synchronization of interstate cases. Existing methods of electronic interstate communication, such as the FCR, CSENet, and EFT/EDI, are dependent upon states maintaining correct other state case Ids for their interstate cases.

ICR

Page 31: Welcome

31

Current activities undertaken by OCSE with the states include efforts to:

• Standardize and clarify interstate terms and definitions,• Improve the accuracy of interstate case data,• Identify ways to most efficiently and effectively work interstate

cases,• Streamline processes in order to better promote electronic

communication through the Federal Case Registry (FCR), the Child Support Enforcement Network (CSENet), electronic funds transfer (EFT/EDI), and

• Assist states in determining controlling orders and reconciling arrears.

ICR

Page 32: Welcome

32

From: Rose BramlettTo: CSE‑CA; CSE‑CASS; CSERMSDate: 11/5/04 4:02PMSubject: ICR Update

PLEASE MAKE SURE ALL EMPLOYEES RECEIVE A COPY OF THIS.

Previously I had sent an email to explain ICR (Interstate Case Reconciliation) and stated that in the next few weeks our system would be processing a match with other states. At that time, the match file was sent to other states but did not include our Agents name and contact information but had given my name for contact. The last match file that was sent just a couple of weeks ago, now has the Agent's name as the contact.

I received a phone call from Ohio today that had called one of our agents who stated they did not know what ICR was. Any case that matches with ALL data in another state, will automatically update the other state case # in $tars. Those that don't match all data will drop into an error report that I will be working to save offices from having to contact the other state, but may need your help with some cases and may contact you.

I just wanted to share the info with you again, and to please ask that all Case Agents have this and the attached information as they may receive calls from other states.

If any questions, or you need any help please email me. Thanks for all you do and all your help

ICR

Page 33: Welcome

33

How do the UIFSA, FIPS code, Case Identifier, FCR and ICR puzzle pieces fit?

ICR

Acrobat

CSENET

FIPS

CASEID

FCR UIFSA

Page 34: Welcome

34

C S E N E TThe Child Support Enforcement Network (CSENet) is a nationwide

communications network that transfers child support case data between states. Over the Network, States use standard transactions to electronically request or provide:

– Location of an NCP, – Paternity and support establishment information, – Enforcement and collection information, and – Other additional case information

CSENet is not a database; it is a case-processing tool. This means actions requested or sent are on specific cases. Information returned will come back only to that specific case. If the NCP has multiple cases, information will be returned only to the case number used to initiate an action. Depending on the circumstances, a transaction may need to be generated on each individual NCP case.

Page 35: Welcome

35

Purpose of CSENET

To provide quick, accurate, and inexpensive exchange of information between states. It is to support data transfers between state child support systems, standardize transactions, support follow up on FCR matches and is fully automated. CSENet is designed to improve interstate case processing by:

• Minimizing the time spent waiting for interstate child support case information to be sent to another state

• Reducing redundant data entry by permitting one state system to communicate with another state system

• Reducing administrative costs by curtailing the paperwork associated with handling an interstate case by electronically transmitting information usually sent in letters or transmittal documents

• Improving the quality of case information sent to the other state by providing data integrity checks to ensure that the information transmitted is complete

CSENet transactions are processed overnight through the CSENet host, located in Manassas, Virginia. All transactions that pass the edit will be sorted at the host by the Federal Information Processing Standards (FIPS) address code. Those that do not pass edit are generated onto a CSENet Error Report. A designated person in each state reviews the report to determine if user training or system enhancement is needed. Georgia staff will receive an email from the state office if the Report indicates user error.

Page 36: Welcome

36

$TARS sends CSENet updates automatically to other CSENet states which receive MSC transactions. A docgen form is not needed. Example: Send CSEnet transaction (MSC P GSPUD) to NC when notifying them case will be closed in 60 days rather than sending FormINC The Other State’s Corresponding FIPS code and Case Number must be entered on the Case Summary/Case Management Screen for this to work properly. These automatic CSENet updates are done through the Federal Interfaces/CSENET Screen.

At this time all states do not communicate for all functions. To view the states and functions with which Georgia has an agreement, go to our staff only web site pages, under Resources tab select CSENET states. Or refer to the listing of states with which Georgia has an agreement as of January 27, 2005 beginning on page 45 of your training manual. Review the states on the Georgia OCSE website before submitting transactions as states are added and functions changed. The list also provides the first 2 digits of all states as well as the US territories.

A transaction will be rejected at the CSENet hub in Virginia if it is sent to either a state not on this list or is sent to a state on the list but not for that specific function.

States With CSENET Agreements

Page 37: Welcome

37

Documents Attached and Comments

The “Documents Attached” feature on State Request and State Response screens refers to Comments.

When adding Comments, enter a check mark in the Documents Attached box. Ensure comments are clear and do not include acronyms that would only be known in Georgia. Your goal is to relate clear, useable information make it clear to whomever reads the case action log what you need from the other state, which state the transaction was sent, and any other item that will be useful at a later date.

Comments entered will document the case action log and can be no more than 240 characters. However, the Case Action Log allows only 150 characters so the last 90 characters will appear separately.

Incoming comments from the transaction can be seen in “Transaction Comments” field. If

the comments are received from a MSC function type, they can also be found in the case action log. If they are received from other function types, they only appear in the “Transaction Comments” on the View Assigned Transaction screen. The case action log will always provide function, action and reason codes.

Page 38: Welcome

38

Example of initial request for enforcement when paperwork is being sent:

For more information regarding documents attached and comments, refer to the information beginning on page 42 in your training manual.

Very Important

VeryImportant

Page 39: Welcome

39

CSENET INCOMING PROMPTS

When a CSENet prompt is received, the information being sent can be determined by:

1. Viewing the Function/Action/Reason Code in the case action log or

2. Viewing the Assigned Transaction screen or 3. Viewing the Data Block information on the View Assigned

Transaction screen.

To respond to an incoming transaction, see State Response information beginning on page 10 in your training manual.

For more information regarding CSENet prompts, refer to the information beginning on page 47 in your training manual.

Page 40: Welcome

40

Tips for submitting a Transaction

1. When using CSENet, verify the UIFSA type, Corresponding FIPS code and the other state’s case number (ID number) if applicable $TARS fields contain the correct information.

2. You cannot enter the other state’s case number when initially sending a request for Enforcement as it will not be known at this time. However, it will be required once the case is registered in the other state.

3. It is important to send the appropriate paperwork (if applicable) to the other state the day the CSENet request is generated.

4. For ENF transactions, enter the support order and applicable accounts into $TARS before trying to submit the CSENet transaction (if no court order, the transaction will be rejected)

5. In the initial transaction, enter the Other State’s FIPS code as 2-state digit code plus 5 zeroes. Once the case is registered in the other state, the FIPS code will be the 2-state plus 3-county plus appropriate correspondence 2-digit code.

6. Mark Documents Attached and enter Comments (if applicable). $TARS documents the case action log with the Function Type, Action Code and Reason Code as well as the comments entered.

7. Ensure that $TARS has the correct UIFSA type code (II, IR, etc.).8. To provide updates, use the State Response screen. Use MSC R to request

updates. Do not use ENF, PAT or EST R once a case has been established in the other state. Use MSC for future requests once an acknowledgement is received to prevent a duplicate case being established.

Page 41: Welcome

41

UNLOCKING THE CSENET CODES

FUNCTION TYPE CODE

ACTION CODE

REASON CODE“I”

“O” DATA BLOCKS

Page 42: Welcome

42

UNLOCKING THE CSENET CODES

The action being communicated is identified by a combination of codes that specify the Function, Action, and Reason for the CSENet transaction. The codes are also referred to by their field names: Functional-Type-Code, Action-Code, and Action-Reason-Code.

The combination of these 3 codes makes up the Transaction Code. The type of transaction determines the required field codes.

Incoming transactions are noted with an “I” and outgoing transactions are noted with an “O” on the CSENet/View Assigned Transactions screen.

Page 43: Welcome

43

UNLOCKING THE CSENET CODES

FUNCTION TYPE CODE

Page 44: Welcome

44

CSENET TransactionFunction Type Code

Functional-Type-Code refers to the child support action to which the transaction relates. The following slide shows the seven (7) valid Function codes. It is important to always verify Georgia has an agreement both with the specific state and for the specific function before sending a CSENET transaction.

Page 45: Welcome

45

CSENET Transaction Function Type Codes

1. L01, Quick Locate - Locating non-custodial parents (NCP)

2. ENF, Enforcement - Enforcing support orders

3. PAT, Paternity - Establishing paternity

4. EST, Establishment - Establishing support orders

5. MSC, Managing State Cases - formerly Miscellaneous Supporting ongoing case activity and administrative services required by the Uniform Interstate Family Support Act (UIFSA).

6. COL, Collection - Notifying a State of (Federal) income tax interception.

7. CSI, Case Status Information - Requesting case information from another State based on FCR proactive match, FCR Query Response, or other source.

Page 46: Welcome

46

L01-QUICK LOCATES

The Quick Locate function is generated when a user believes the NCP may be in another state with which Georgia has an L01 agreement. $TARS allows only three L01’s on a single case per day. If no SSN is on the system, the responding state may return the transaction automatically without performing a search. It is very important to obtain the NCP’s SSN and process client ID corrections as soon as possible if required.

LO1 transactions should be a fully automated process; however, this is dependent on each state. Worker intervention should not be required. When L01 transactions are received, the receiving state’s computer system checks it’s database and sends a response. The Reason codes for LO1 transactions provide very specific information, understanding the response assists the user in quickly identifying if successful or unsuccessful information was returned.

For more information on L01, refer to the information beginning on page 15 in your training manual.

Page 47: Welcome

47

Enforcement (ENF)

Ensure the other state has an ENF agreement with Georgia.

The ENF Function code supports a variety of enforcement actions for interstate cases.

Once the interstate case has been initiated, the Georgia user may receive a prompt such as “CSENET: Info Rec’d for Case”, “CSENET: Transaction Rec’d with new/info for Case”, “CSENET: MSC info Rec’d for Case” or “CSENET: Request Rec’d for Case”. Go to the View Assigned Transactions screen (information beginning on page 12) to see the information or request.

To provide updates, use the State Response screen. Use MSC R to request updates. Do not use ENF R once acknowledgement has been received to prevent a duplicate case being established. See the View Assigned Transactions section to see more on requesting or sending updates using the Generate Response feature.

For more information regarding the ENF function type, refer to the information beginning on page 18 in your training manual.

Page 48: Welcome

48

Paternity (PAT)

Ensure the other state has a PAT agreement with Georgia.

The paternity process is used to request and receive assistance with the establishment of paternity. The function type is Paternity Establishment Required (PAT). This function type is used when paternity establishment only is being requested. An example would be if the NCP is located in prison and all that is needed is establishment of paternity.

When requesting establishment of both paternity and an order, use the Order Establishment Request (EST) function. Because only one function type can be entered, use EST, click Documents Attached and document in the Comments field what is being requested in the actual petition

Example: EST R SRORD (Request Support Establishment all available support types); Comments: Georgia is mailing NC a petition requesting establishment of paternity, support, medical and income deduction on 02/21/05.

For more information regarding the PAT function type, refer to the information beginning on page 20 in your training manual.

Page 49: Welcome

49

Establishment (EST)

Ensure the other state has an EST agreement with Georgia.

The order establishment process is used to request and receive assistance with the establishment of a support order. The process for requesting an establishment of an order is the same as paternity.

Once the interstate case has been initiated, the Establishment or Miscellaneous function can be used to provide updated information. However, use EST R only one time as sending again may cause the other state to create a second case.

For more information regarding the EST function type, refer to the information beginning on page 22 in your training manual.

Page 50: Welcome

50

Managing State Cases (MSC)Ensure the other state has a MSC agreement with Georgia.

The MSC code previously stood for Miscellaneous. It has been changed to Managing State Cases. To coincide with $TARS and for this training, we will refer to it as Miscellaneous Transactions. However, Federal information refers to it as Managing State Cases.

The Miscellaneous (MSC) Function code supports many of the requirements that are not addressed by other Function codes. MSC transactions can be used to communicate a variety of actions including ongoing case activities, status update requests and responses, and notification of hearing dates. A MSC transaction may be generated automatically by the system or manually by a user. These function types are the ones used most often.

For more information regarding the MSC function type, refer to the information beginning on page 24 in your training manual.

Page 51: Welcome

51

The Collection (COL) Function code is used to notify another State that an IRS tax intercept has been received and disbursed. The initiating state’s system must automatically generate a CSENET notice to the responding state when the IRS tax intercept is received. The sole purpose of the COL function code is to notify the other state when a federal tax intercept is credited. No responses are required by the responding state. Once a COL is received, adjust the arrears by posting as a certified payment.

In the summer of 2003 Georgia sent its first automatic Tax Collection information through CSENET and began with Tax Year 2002. The Collection transactions are generated quarterly and obtained from the Payment Summary Screen when Payment Source is F.

If an NCP receives a refund after the tax collection is posted, notify the other state using a MSC function code.

If an outgoing COL transaction is found on the View Assigned Transactions screen for a state with which Georgia does not have a COL agreement, the transaction will fail at the Federal CSENet Hub in Virginia. Georgia user must send manual notice of the tax collection to states that are not on the list of CSENet states accepting COL transactions.

For more information regarding the COL function type, refer to the information beginning on page 26 in your training manual.

Collection (COL)

Page 52: Welcome

52

Ensure the other state has a CSI agreement with Georgia.

The Case Information Transaction (CSI) Function code was added to allow states to send and receive requests for basic case and participant information when a FCR (Federal Case Registry) Proactive Match is received. If one state shares a client of any type with another state, a FCR Proactive Match is generated. The match does not provide detailed case information; it only acts as a pointer that another state has a case. The CSI function is only used in connection with a FCR Proactive Match. It is not used to generate messages back and forth on an existing interstate case. A CSI request can be generated through the CSENet or FCR screens if the other state has an agreement with Georgia for CSI function codes.

FCR Match Information screen provides the State, matched case identification number, matched client name, social security number (SSN) of matched client, and member type. The county code is sometimes provided. The matched case ID is the case number in the other state.

Case Information Transaction (CSI)

Page 53: Welcome

53

If the case number and SSN provided by the FCR matches the “Other State’s Case Number” on the Case Management screen, $TARS should delete the proactive match and not send a FCR prompt to a user. If either the case number or the SSN does not match, the user will receive the FCR Proactive Match.

In $TARS the FCR Proactive Match screen shows the name of the client on which the match was received which may not necessarily be the name of the NCP.

Example: Prompt received on John Doe, case #123456789Go to FCR Proactive Match screen; no John Doe shows on the screenFCR Proactive Match shows case #123456789 with Client and NCP name

as Silly SallyThe match came in on Silly Sally, who may be the CP/CU or child on

Georgia’s case

Case Information Transaction (CSI)

Page 54: Welcome

54

Case Information Transaction (CSI)Example of FCR Proactive Match screen showing Client and NCP names. The Case Date is the date the case was sent to the FCR by the other state, not when Georgia user received the prompt or the match.

Page 55: Welcome

55

Case Information Transaction (CSI)Example of information received on the match. The response date is the date the

match was received.

A CSI request can be submitted either through the FCR Match Information screen or through the CSENet Request screen. Delete the match if no CSI Request is needed.

For more information regarding the CSI function type, refer to the information beginning on page 27 in your training manual.

Page 56: Welcome

56

Name the 7 function type codes and provide a brief summary of each.

1. L01, Quick Locate - Locating non-custodial parents (NCP)

2. ENF, Enforcement - Enforcing support orders

3. PAT, Paternity - Establishing paternity

4. EST, Establishment - Establishing support orders

5. MSC, Managing State Cases - formerly Miscellaneous Supporting ongoing case activity and administrative services required by the Uniform Interstate Family Support Act (UIFSA).

6. COL, Collection - Notifying a State of (Federal) income tax interception.

7. CSI, Case Status Information - Requesting case information from another State based on FCR proactive match, FCR Query Response, or other source.

Page 57: Welcome

57

UNLOCKING THE CSENET CODES

ACTION CODE

Page 58: Welcome

58

ACTION CODESThe Action-code, also required for each transaction, describes the kind of transaction. An example is using R to request information from another state and P to provide information to another state. There are 6 valid Action codes:

Additional information concerning Action Codes can be found beginning on page 31 in your training manual.

After the other state has established a case on their system, do not use the “R” Action code on future ENF, PAT or EST transactions. Example: EST R SRORD sent to FL, Acknowledgement received from FL providing case number and requesting additional information. Georgia agent is uncertain what information is needed from FL and wants to ask a question. Do not send another EST R to ask the question; use MSC R instead. Using EST R again may cause FL to create another case.

R-Request (initial requesting activity)

A-Acknowledgment of receipt of a Request

P-Provision of information/Response to a request

M-Reminder (used when a Response is overdue)

U-Update of a previously transmitted Request

C-Cancellation of a previously transmitted Request

Page 59: Welcome

59

UNLOCKING THE CSENET CODES

REASON CODE

Page 60: Welcome

60

REASON CODES

The Reason code, which is not required for every transaction, provides further definition of the activity that the transaction communicates. CSENet allows only certain combinations of function, action and reason codes and will not allow invalid transactions to be processed. $TARS only provides Reason Code options that match both the Function and Action Codes.

Additional information concerning Reason Codes can be found beginning on page 37 in your training manual.

The first two characters of the Reason code assist to quickly identify the nature of the transaction. Example: L as noted in LSADR reason code stands for Locate, S stands for Successful. When seeing the CSENet code in the case action log, you will readily know Successful Locate information is being sent.

Page 61: Welcome

61

UNLOCKING THE CSENET CODES

DATA BLOCKS

Page 62: Welcome

62

DATA BLOCKS

Data Blocks can be found on the VIEW ASSIGNED TRANSACTIONS screen. This is the screen that shows both outgoing and incoming transactions. To see information received, highlight the transaction; scroll to the bottom of the screen to the Data Block drop-down box; Acrobat Reader will open.

Each Data Block contains data elements that convey child support case information. The transaction type determines the required data blocks and elements.

Additional information concerning Data Blocks can be found beginning on page 38 in your training manual.

Page 63: Welcome

63

UNLOCKING THE CSENET CODES

“ I ”

“ O ”

Page 64: Welcome

64

Incoming and Outgoing transactions on the VIEW ASSIGNED TRANSACTIONS screen - This is the screen that shows both outgoing and incoming transactions.

The screen provides the Functional Type, Action code and Reason Code, the date the information was received, the other state’s case number, other state’s FIPS code, the Reference (or transaction) number, the UIFSA code type and whether it is an Incoming (I) or Outgoing (O) transaction.

An Outgoing transaction will be replaced with an Incoming transaction when a response is received.

“I” – INCOMING“O” – OUTGOINGTRANSACTIONS

Page 65: Welcome

65

UNLOCKING THE CSENET CODES

Quick Guide to Transaction CodesFunction Codes: L01=Quick Locate; CSI=Case Status Information;

ENF=Enforcement; MSC= Managing State Case; PAT=Paternity; EST=Establishment; COL=Collection

Action Codes: R=Request – an initiating transaction; A=Acknowledgement of receipt of request; P=Provision of information; M=Reminder – used when a response is overdue; U=Update of previously transmitted request; C=Cancel of previous request

Reason Codes: 1st ltr. of Reason Code: G=General; A=Acknowledgement; L=Locate; P=Paternity; S=Support Order; E=Enforcement; C=Collection; F=CSI2nd ltr. of Reason Code: I=Information Only; R=Request; A=Acknowledgement; S=Successful Response (data for update); U=Unsuccessful (no useful data)

Page 66: Welcome

66

CSENET Screens

Page 67: Welcome

67

Page 68: Welcome

68

Page 69: Welcome

69

State Request

State Response Case Information

View AssignedTransactions

Page 70: Welcome

70

STATE REQUEST screen

Page 71: Welcome

71

CSENET Screens

STATE REQUEST screen - Examples of when a request can be sent are sending UIFSA for the first time and requesting status updates.This screen is used to send Requests for actions, Cancel previous actions or Remind the other state no response has been received.

Page 72: Welcome

72

State Request Screen Tips:

1. Do not use ENF, PAT or EST R once a case has been established in the other state. Use MSC for future requests.

2. A FIPS code is always required

3. A case number may or may not be required dependent on the type of request being sent. If a first-time request is being sent to begin the UIFSA process, no case number is entered since the other state has not established a case yet. However, if a user is asking for an update on an existing case, a case number is required.

4. A Reason Code may or may not be required dependent on Functional Type and Action Code used. (A Reason Code is not required when sending a L01 request; it is required when sending a MSC request.)

5. A COL (federal tax collection) request cannot be generated from this screen; if specific tax collection information is needed, use MSC function.

6. When a request is generated, the transaction can be seen in the case action log and on the View Assigned Transactions screen as an Outgoing transaction. When the other state responds to this transaction, it will change to an Incoming transaction.

For more information on the State Request feature, refer to the information beginning on page 9 in your training manual.

Page 73: Welcome

73

STATE RESPONSE screen

Page 74: Welcome

74

CSENET Screens

STATE RESPONSE screen - The Response screen is used to provide information or to respond to a transaction received. All Functional Types can be used. The Action Code is based on the Functional Type and is limited to provide information (P), acknowledge receipt of a request (A) or update of a previously submitted transaction (U).

Page 75: Welcome

75

1. The other state’s case number is required to use the Provision of Information or Acknowledgement of Receipt of Request action codes. The other state’s case number is not required to use the Update action code as the other state may not have established a case yet; when a case is established in the other state, always enter the other state’s case number.

2. Using the Generate Response button on the View Assigned Transactions screen will also access the State Response screen. Highlight the transaction on which to send a response, click on Generate Response, the State Response screen will open with the other state’s case number and FIPS received in the transaction. Enter appropriate codes and submit a response. Remove the information in the “Respond to Ref Num” field if error received when submitting transaction.

For more information on the State Response feature, refer to the information beginning on page 10 in your training manual.

State Response Screen Tips:

Page 76: Welcome

76

CASE INFORMATION screen

Page 77: Welcome

77

CSENET Screens

CASE INFORMATION screen - The Case Information screen provides basic information that is helpful when quickly reviewing a case. The UIFSA type, other state’s case number and other state’s FIPS code can be entered either on this screen or the Case Management Screen.It is also a good location to enter the other state’s local office agent, address, phone number and email address. $TARS should automatically move the other state’s case number and worker information onto this screen when it received in a CSENet transaction. The Respond/Initiate, Document Received Indicator and Document Date fields are optional and were brought over from an old program.

Page 78: Welcome

78

VIEW ASSIGNED TRANSACTIONS screen

Page 79: Welcome

79

CSENET Screens

VIEW ASSIGNED TRANSACTIONS screen - This is the screen that shows both outgoing and incoming transactions. An Outgoing transaction will be replaced with an Incoming transaction when a response is received. The screen provides the Functional Type, Action code and Reason Code, the date the information was received, the other state’s case number, other state’s FIPS code, the Reference (or transaction) number, the UIFSA code type and whether it is an Incoming (I) or Outgoing (O) transaction. Any comments that are sent with the transaction by the other state’s user appears on this screen in the Transaction Comments field. To see information received, highlight the transaction; scroll to the bottom of the screen to the Data Block drop-down box; Acrobat Reader will open.

The user can also generate a response from the View screen by highlighting the transaction and clicking on the Generate Response button. $TARS will take you to the State Response screen and will pull over the other state’s case number, FIPS code and the CSENET transaction number. Use the appropriate function, action and reason codes. If an error code is received when using the Generate Response feature, remove the Transaction number.

Page 80: Welcome

80

ACROBAT READER

Page 81: Welcome

81

To copy information from Acrobat Reader into $TARS, change the hand tool to Text by clicking on the T icon at the top of the screen. You can then copy and paste information into various $TARS fields. Print any pages as needed. To close out Acrobat Reader, click on the X at the right top of the screen.

Hint: Before copying and pasting new address and employer information, check to see if the same information has been received through a FPLS hit. It is easier to put the information into a sequence on Locate Management or Locate Employer than using the copy and paste feature here.

For more information regarding How To Use Acrobat Reader, refer to the GA OCSE website – staff only pages – manuals.

ACROBAT READER

Page 82: Welcome

82

How do the pieces of the CSENet puzzle fit together?

ICR

Acrobat

CSENET

FIPS

CASEID

FCR UIFSA

In Summary

Page 83: Welcome

83

THANK YOU

Happy CSENetting to you all