WEL COME TO COE RAC SECTOR
-
Upload
griffith-wong -
Category
Documents
-
view
19 -
download
4
description
Transcript of WEL COME TO COE RAC SECTOR
WEL COMETO
COE RAC SECTOR
MODULE 1
BASIC WORKSHOP PRACTICE
LESSON 15
HACKSAW FRAME AND BLADE
OBJECTIVES
• Identify the parts of a hacksaw frame
• Specify hacksaw blade.
• State the different types of hacksaw frame
and their uses.
Parts of hacksaw frameThe hand hacksaw is used along with a blade to cut metals of different sections it is also used to cut slots and counters
Types of Hacksaw Frames
The two diiferenrs types of hacksaw frames are
1.Solid frame2.Adjustable frame
a. Adjustable flat typeb. Adjustable tubular type
1.Solid frame
• Only a particular standard length of blade can be fitted to this frame
2. Adjustable Hacksaw frame
Different standard lengths of blade can be fitted ti this frame
Hacksaw Blades
A hacksaw blade is a thin narrow steel band with teeth and two pin holes at the ends. It is used along with a hacksaw frame. The blade is made either low alloy steel (HS) and is available in standard lengths of 250 mm and 300 mm .
Parts of the blade
Type of hacksaw blades
1. All hard blades
2. Flexible blades
Pitch of the bladeThe distance between adjacent teeth is known as the pitch of the blade
Setting of the sawStaggered setting Wave setting