Weighbridge manufacturer
-
Upload
tekaseo -
Category
Technology
-
view
325 -
download
0
description
Transcript of Weighbridge manufacturer
APPLE Weighinfra Limitedformerly Known as Apple InframentationAN ISO 9001:2008 COMPANY
Weighbridge Manufacturer
Introduction
APPLE Weighinfra Ltd. formerly Known as Apple Inframentation
AN ISO 9000:2008 Company We are manufacturing Electronic Weighing Scales from 1994 One of the leading manufacturer of Weighing scales and
weighbridges of various type. Weighing scales and weighbridges is from 0.5 microgram to 100
tones Our expert uses all modern and latest technologies and insure
the quality.
History 170 Years of Vehicle Weighing in 30 seconds
Thaddeus Fairbanks 1831 Hayden-Cartwright Act 1934 Type A Loadometer 1939 Strain Gage Load Cell 1942 Traffic Monitoring Guide 1985
Project Summary
We all knows the growth of country is due to transport facility and India has 60% transport through road.
Provision of road infrastructure facilities to the public. These include development, maintenance and rehabilitation of the Road network in the country
The cost of operating a road transportation system, in any country, entails two main components, namely;
The cost of operating fleet of vehicles using the road, The cost of constructing, maintaining and rehabilitating the
roads themselves
Project Summary
Construction cost in Road Infrastructure :- Its ok for first time, we can eliminate the re-construction cost by proper monitoring and management of traffic in that route.
BUT HOW ?
Road Damage Reason
Non-Traffic Associated Damage Rainfall (Moisture) – Materials Strength Reduced Ultra Violet Radiation – Ageing of Surface Materials
Traffic Associated Damage Axle Loads – Overloading
Tire Pressure – New Tire Technology
Problems due to overloading Failure by permanent deformation Rutting Cracking Corrugations Depressions Potholes Bleeding/Flatting up Fretting/Stripping
RUTTING
EFFECTS OF RUTTING
WIM technology
Weigh-in-Motion is a major tool used to collect traffic data. WIM is described as “the process of measuring the dynamic tire forces of a moving vehicle and estimating the corresponding tire loads of the static vehicle” in the standard specification
Weigh in Motion
Weigh in Motion
Problem StatementDue to overloaded vehicles there is following problem may
arise resulting increase in unexpected and unnecessary expenses in road infrastructure
Failure by permanent deformation Rutting Cracking Corrugations Depressions Potholes Bleeding/Flatting up Fretting/Stripping
Key Benefits
WIM helps to detect overloaded vehicles.
Prevent Infrastructure damage Improve traffic control and performance Decrease fraud in transportation Can generate extra revenue
Evaluation
Complete project will be executed under supervision, guidance provide consultant for other works. All necessary equipment and software can be
arranged and modify according to needs. All drawing required for construction will be
provided.
Questions?