Ana  Silvia  Hernandez  Balcazar  12/11/12  

ACAD

Week 8

Model space and Page Set-Up Manager.

CONSTRAINTINFER to 0

To see your working plan, you have to change to layout 1 on the left down corner.

Right click on Layout 1 to get your page settings.

 

 

 

 

   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click here for an alternative to right clicking

the layout tab.

Then you can right click on the Layout to take you to page setup –

modify…

Right click on Layout1.

Select Page setup manager.

Ana  Silvia  Hernandez  Balcazar  12/11/12  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Display – Current display in model space

Extents – The whole of the drawing in model space

Layout – Your current layout / Paperspace view (the white page).

Window – Select a portion of the drawing to print.

Use PDF as virtual default printer.

To print on the first floor choose – Student Follow You. On the ground floor choose- the

T110 in HT012 and the DJ500 in HT005.

To print out in black and white – choose Monochrome – Default is

usually set to none & we set Line/Pen colour by layer.

Plot scale should always be 1:1 in mm.

This is where the vast majority of printing errors occur.

Select Paper Size A3

Ana  Silvia  Hernandez  Balcazar  12/11/12  

If you want to print in colour.

 

 

Change to Student Follow

You.

1. Properties.

2. Custom Properties.

3. Change to Colour.

Double click here to operate (Zoom) paperspace.

Double click here to operate a window (Zoom) into model space.