WEBER SILAS HRC fuse-switch- disconnectors
Transcript of WEBER SILAS HRC fuse-switch- disconnectors
E3.2
WEBERSILAS HRC fuse-switch-disconnectors
Contents
2
WEBERS ILAS
E3.2
Page
The new generation SILAS 3
Unique advantages of SILAS for mounting on busbars and on base plates 4 – 7
New connection technique 8
SILAS bus-mounting model for system with 40 mm busbar spacing 8
Accessories – Easy solutions to practical problems 9
Order details for SILAS models for mounting on base plates 10 – 11
Order details for SILAS models for bus mounting 12 – 13
Order details for accessories for SILAS size 00 14 – 15
Order details for accessories for SILAS sizes 1–3 16 – 17
Order details for current transformer installation for SILAS sizes 00–3 18 – 19
Overview of accessories 20
Type designation for base-plate mounting 20
Technical details 21
Dimensions 22 – 23
Edition 2002 Rights of technical changes reserved
The new generation SILAS
3
WEBERS ILAS
The new SILAS series sizes 00, 1, 2 and 3 was develop-ed on the basis of extensive market studies and with aholistic view of customer needs. The resulting advan-tages for users are readily apparent.
With this new SILAS generation, planners and switch-gear manufacturers are provided with a range of devic-es that will help them remain competitive in the face ofever tougher market requirements. After all, modern approaches to power distribution demand modularswitchgear that is simple to install and safe and reliablein operation. A cost-benefit ratio in line with the marketand ease of service are absolute musts.
SILAS for mounting on base plates
The disconnectors for mounting on base plates, sizes00, 1, 2 and 3, come with a number of predrilled fastening holes that allow these models to be used onbase plates or on profiles. With the appropriate acces-sories, the sizes 00 and 1 can be mounted on two top-hat rails.
SILAS offers innovative solutions
On the new SILAS models for mounting on base platesand for bus mounting, the entire covers can be easilyremoved while the switching cover is closed, thus eliminating the need for elaborate trim frames and extensions.
Integrated hand protection and a sliding viewing win-dow enable voltage tests to be conducted on contactblades or strap handles.
Types in the sizes 1, 2 and 3 can be retrofitted with anarc sheet to increase the switching capacity.
Besides reliable connection techniques such as cablelug, clamp connector for copper and aluminum, a newbox terminal was developed for SILAS size 00. It has thedual advantage of reducing the connection installationtime and eliminating the need for cable lugs.
All SILAS disconnectors can be sealed and fitted with alocking mechanism.
SILAS for bus mounting
What makes the bus-mounting disconnectors sizes 00,1, 2 and 3 unique is that they all have the same installa-tion height (32 or 70 mm). This eliminates the need forelaborate compensating parts and makes the coversvery easy to manufacture.
A new SILAS 00 with lower outgoing terminals was developed for installation next to D-bus-mounting fuseelements. This eliminates the fuss of having to bend thecables.
Another unique feature is the patented system for con-verting the outgoing arrangement from top to bottomand vice versa. A few simple adjustments are all that isneeded.
The fuse-switch-disconnectors can be attached, posi-tioned and tightened effortlessly.
Practical accessories
Laterally attachable support profiles for all disconnectorsizes enlarge the cut-out tolerances of the cover plateswhile also supporting these plates.
The electronic fuse monitor is directly attached to theswitching cover. The installation depth is 28 mm. Alight-emitting diode starts blinking red the moment thefuses fail. A test button and a 4-pole connector for re-mote indication are attached to the housing.
The user can install class 0.5s or 1 current transformersfor SILAS sizes 00, 1, 2 and 3 himself with the appro-priate assembly kits.
Further accessories like terminal housing cover, ter-minal extension, position indication for switching cover,etc., assist the user in finding the optimum approach.
Unique advantages for SILAS bus-mounting models
4
WEBERS ILAS
Mounting depth of 32 mm
Suitable for D-bus mounting fuseelements
Same level as SILAS sizes 00–3
No additional parts
Mounting depth 70 mm
Mounting depth without D-bus mounting fuse elements
Same level as SILAS sizes 00–3
No additional parts
Very easy cut-outs for covers SILAS sizes 00, 1, 2 and 3
Low mounting depth
No adapter required
Direct contacting
Short current paths
Unique advantages for SILAS bus-mounting models
5
WEBERS ILAS
Sensational conversion
Conversion of outgoing top/bottomin no time at all
Reduced stocking costs
For all sizes 00–3
Patented solution
Mounting advantage
Attach effortlessly to the busbar
Position with ease
Tighten the screw
Busbar carrier can be covered over
Less space is lost
for SILAS sizes 00, 2 and 3
SILAS 00 with new connectiontechnique
Besides D-bus mounting fuse ele-ments, mounting depth of 32 mm
Box terminals up to 70 mm2 Cu
Separate model
Unique advantages of SILAS for mounting on busbars and on base plates
6
WEBERS ILAS
Covers removable without opening switch
Easy to detach cover
even without opening switch
Current is not interrupted
No need for expensive trim frames or extensions
Cost savings
No additional parts required
Ideal voltage test
Long test probe on contact blade
Short test probe on strap handle
Optimum labeling
Interchangeable
Protected label
Max. of A … can be entered
Technical data always visible
Unique advantages of SILAS for mounting on busbars and on base plates
7
WEBERS ILAS
Reliable switching with integrat-ed hand protection feature
Prevents fuse-unit contact
Protection against electric arc
Locking cover with sealing facility
Locking mechanism for switching cover for non-instructed individuals
Switching cover is sealable
Protection against accidentalcontact in the standard model
Terminal housing closed
Optimum knock-out features
Terminal housing cover usually not needed
Knock-out versions for connections
Standard model closed
Very simple break-out
for all versions
also those with terminal housing covers
New connection technique
8
WEBERS ILAS
for SILAS 00
Advantageous box terminalsSave timeCu conductor up to 70 mm2
No cable lug needed
or universal screw terminalfor M8 cable lugThis can be retrofitted…
for SILAS sizes 1–3
The standard versionSize 1 for M10 cable lugSize 2 for M10 cable lugSize 3 for M12 cable lug
Easy to change the various types of connection
Clamp connection for Cu conductorsPrism terminal for Al or Cu conductorsPrism terminal for two conductors
SILAS bus-mounting model for system with 40 mm busbar spacing
SILAS sizes 00 and 1
Mounting depth 70 mm
Outgoing connection as with bus-mounted disconnector 60 mm
Size 00 can be attached to busbar
Size 1 contacting as with bus-mounteddisconnector 60 mm
Accessories – Easy solutions to practical problems
9
WEBERS ILAS
Support surface for coverplates
Latchable bracket on the side Allows greater cutting tolerances
Attachment on top-hat rail
for sizes 00 and 1 with spacing of 125 or 150 mm
Terminal extensionsizes 1, 2 and 3, at mountingdepth of 32 mm for cable lugconnection
Switching cover positionindicator
Same micro switch as SILAS00–31 close contact and 1 opencontact
High switching capacityEasy to retrofit for higherswitching capacity withblow-out plates SILAS 1–3for AC – 23 B at 690 Vor to order as such ex works
Terminal housing covers
As compensation with SILAS 00 to SILAS 1–3As terminal housing coverfor SILAS 00–3 (pursuant to UVV-BGV A2)optional expanable
Current transformer designSILAS sizes 00–3Installation kit for mountingcurrent transformerCurrent transformer, class 0.5s or 1
Fuse monitoringDirectly mountedMinimum depth of 28 mmLED blinks if one, two, or threefuses failBuilt-in test key4-pole plug on housing forremote alarm
HRC fuse-switch-disconnectors
10
WEBERS ILAS
Technical details 21 Dimensions 22 Accessories 14 – 19
SILAS for mounting on base plates or profiles
ll5
ll4
ll3
ll1 ll2
ll10
ll6 ll7
ll9 ll8ll12
ll11
Order details
11
WEBERS ILAS
Technical details 21 Dimensions 22 Accessories 14 – 19
Description Size Item No Pack
screw connection M8box terminal for Cu up to 70 mm2
screw connection M10screw connection M10screw connection M12
screw connection M8box terminal for Cu up to 70 mm2
screw connection M10screw connection M10screw connection M12
screw connection M10screw connection M10screw connection M12
dimensions of cover 266 x 192 mmwith neutral disconnector N160with neutral disconnector NTK160
0000
123
0000
123
123
0000
Ie A
160160
250400630
160160
250400630
250400630
160160
S00S00R
S1S2S3
S00SUS00RSU
S1SUS2SUS3SU
SH1SH2SH3
S00NS00NTK
707.036.001707.036.002
707.037.001707.038.001707.039.001
707.036.007707.036.008
707.037.011707.038.011707.039.011
707.037.021707.038.021707.039.021
707.042.010707.042.020
11
111
11
111
111
11
Type Weight
0.6450.605
2.0303.0103.545
0.7300.690
2.1153.0953.630
2.1803.1793.733
1.3901.580
SILAS for mounting on base plates or profiles
HRC fuse-switch-disconnectors
Remarks:– SILAS with mounted clamp connection or prism terminal or other combinations on request
HRC fuse-switch-disconnectors with shroudingcover and neutral conductor disconnector
HRC fuse-switch-disconnectors with high switching capacity AC-23B
HRC fuse-switch-disconnectors with electronic fuse monitoring
ll1ll2
ll3ll4ll5
ll6ll7
ll8ll9ll10
ll11
ll12
40
40
60
60
60
60
HRC fuse-switch-disconnectors
12
WEBERS ILAS
Technical details 21 Dimensions 23 Accessories 14 – 19
SILAS for bus mounting on system with 40 mm busbar spacing
Bar width 12 mmBar thickness 5 and 10 mm
on system with 60 mm busbar spacing
Bar width 12–30 mmBar thickness 5–10 mm
on system with 60 mm busbar spacing
with fuse monitoring
ll9
ll8
ll7ll6 ll5
ll4
ll3ll1 ll2
ll15
ll14
ll13
ll11 ll12
ll10
Order details
13
WEBERS ILAS
Technical details 21 Dimensions 23 Accessories 14 – 19
HRC fuse-switch-disconnectors for bus mounting
Description Item NoSizeIe A Pack
HRC fuse-switch-disconnectors for bus mountingscrew connection M8box terminal for Cu up to 70 mm2
screw connection M10
HRC fuse-switch-disconnectors for bus mountingbox terminal for Cu up to 70 mm2
HRC fuse-switch-disconnectors for bus mountingscrew connection M8box terminal for Cu up to 70 mm2
screw connection M10screw connection M10screw connection M12
HRC fuse-switch-disconnectors for bus mountingbox terminal for Cu up to 70 mm2
HRC fuse-switch-disconnectors for bus mountingscrew connection M8box terminal for Cu up to 70 mm2
screw connection M10screw connection M10screw connection M12
HRC fuse-switch-disconnectors for bus mountingscrew connection M10screw connection M10screw connection M12
0000
1
00
0000
123
00
0000
123
123
160160
250
160
160160
250400630
160
160160
250400630
250400630
SR00TVSR00RTV
SR1V
SR00R
SR00TSR00RT
SR1SR2SR3
SR00RSU
SR00TSUSR00RTSU
SR1SUSR2SUSR3SU
SRH1SRH2SRH3
707.036.012707.036.013
707.037.031
707.036.016
707.036.017707.036.018
707.037.041707.038.041707.039.041
707.036.031
707.036.032707.036.033
707.037.051707.038.051707.039.051
707.037.061707.038.061707.039.061
11
1
1
11
111
1
11
111
111
Type Weight
0.7150.685
2.120
0.801
0.7800.750
2.1203.1803.820
0.886
0.8650.835
2.2053.2653.905
2.2703.3494.008
Remarks:– Installation depth = dimension of busbar up to cover plate – SILAS with mounted clamp connection or prism terminal or other combinations on request
On system with 40 mm busbar spacing, installation depth 70 mm
SILAS with fuse monitoring, on system with 60 mm busbar spacing, installation depth 32 mm
SILAS with fuse monitoring, on system with 60 mm busbar spacing, installation depth 70 mm
SILAS with high switching capacity AC-23B, on systemwith 60 mm busbar spacing, installation depth 70 mm
On system with 60 mm busbar spacing, installation depth 70 mm
On system with 60 mm busbar spacing, installation depth 32 mm
ll1ll2
ll3
ll4
ll5ll6
ll7ll8ll9
ll10
ll11
ll12
ll13
ll14
ll15
Accessories for SILAS size 00
14
WEBERS ILAS
Technical details 21 Dimensions 22 – 23
ll7
ll1 Standard version M8 screw-type terminal
ll2 ll3 ll4 Only possible on M8 screw-type terminal
ll10
ll6 ll1ll4
ll3ll2
ll8
ll7
ll5
ll6
ll9
Order details
15
WEBERS ILAS
Technical details 21 Dimensions 22 – 23
Accessories for SILAS size 00
Description Item NoSizeIe A Pack
Screw connection M8 x 14with spring element for cable lug max. 95 mm2
set = 3 pieces
Clamp connectionfor copper, set = 3 pieces 6 – 50 mm2
Prism terminalfor copper and aluminium*, set = 3 pieces 6 – 70 mm2
Triple terminalfor 3 conductors, set = 3 pieces 3 x 1,5 – 16 mm2
PE/N terminationto be mounted left or rightfor M8 screws
Terminal coverprevents accidental contact (pursuant to UVV-BGV A2) or to compensate
Support profilelaterally attachable, set = 2 pieces
Attachment to top-hat railsfor use on two top-hat rails withspacing of 125 or 150 mm, set = 1 piece
Indication switch for covermicro switch with opener and closer2 A 250 V tab 2.8 x 0.5
Locking windowmountable from the inside, set = 3 pieces
00
00
00
00
00
00
00
00
00
00
V00-S
S-00C
S-00A
S-00DK
S-00PEN
S-00ARA
S-00AP
S-UD
S-US
S-UV
708.121.010
707.001.010
707.007.010
707.057.010
707.050.010
707.041.010
707.056.010
707.049.010
707.055.010
707.062.010
Set
Set
Set
Set
1
1
Set
Set
1
Set
Type Weight
0.042
0.033
0.075
0.147
0.034
0.031
0.022
0.053
0.006
0.005
ll1
ll2
ll3
ll4
ll5
ll6
ll7
ll8
ll9
ll10
* = Aluminum conductor connections should be checked at regular intervals
Accessories for SILAS sizes 1–3
16
WEBERS ILAS
Technical details 21 Dimensions 22 – 23
ll4
ll1ll2
ll3
ll5
ll5
ll4
ll6
ll10
ll7
ll9
ll6
ll8
Order details
17
WEBERS ILAS
Technical details 21 Dimensions 22 – 23
Accessories for SILAS sizes 1–3
Description Item NoSizeIe A Pack
Clamp connectionfor solid rm, sm and laminated copper, set = 3 piecesconnection 70–150 mm2 / 18 x 7–18 mm
120–240 mm2 / 21 x 5–19 mm150–300 mm2 / 25 x 7–20 mm
Prism terminalfor copper and aluminium*, set = 3 piecesconnection 70–150 mm2 / 18 x 10 mm
120–240 mm2 / 21 x 15 mm150–300 mm2 / 25 x 20 mm
Prism terminal for 2 conductorsfor copper and aluminium*, set = 3 piecesconnection 2 x 35– 70 mm2
2 x 70–120 mm2
2 x 150–185 mm2
Terminal housing coverprevents accidental contact (pursuant to UVV-BGV A2) or to compensate
Support profilelaterally attachable, set = 2 pieces
Attachment to top-hat rails, set = 1 piecefor use on two top-hat rails with spacing of 125 or 150 mm
Indication switch for covermicro switch with opener and closer2 A 250 V tab 2.8 x 0.5
Locking windowmountable from the inside, set = 3 pieces
Terminal extensionfor installation depth of 32 mm, set = 3 pieces
Retrofit kit for increased switching capacity, set = 3 pieces
Busbar adaptersfor mounting SILAS on 100 mm busbar systemsBusbar adaptersBusbar adaptersBusbar adapters
123
123
123
123
1–3
1
1–3
123
123
123
250400630
S-1CS-2CS-3C
S-1AS-2AS-3A
S-1ADS-2ADS-3AD
S-1ARAS-2ARAS-3ARA
S-UAP
S-UD
S-US
S-UV
S-1AVS-2AVS-3AV
S-1HS-2HS-3H
S-1SAS-2SAS-3SA
907.910.063907.910.064907.910.065
907.910.049907.910.050907.910.051
907.910.070907.910.071907.910.072
707.041.020707.041.030707.041.040
707.056.020
707.049.010
707.055.010
707.062.010
707.059.010707.059.020707.059.030
707.058.010707.058.020707.058.030
707.063.010707.063.020707.063.030
Set Set Set
Set Set Set
Set Set Set
111
Set
Set
1
Set
Set Set Set
SetSetSet
111
Type Weight
0.1800.3060.378
0.3330.5850.735
0.6571.1641.461
0.0630.0920.108
0.042
0.053
0.006
0.005
0.1980.3390.462
0.1540.1730.192
ll1
ll2
ll3
ll4
ll5
ll6
ll7
ll8
ll9
ll10
* = Aluminum conductor connections should be checked at regular intervals
Current transformer installation for SILAS sizes 00–3
18
WEBERS ILAS
Technical details 21 Dimensions 23
ll5
ll6
ll7
ll8
ll9
ll1
ll3ll2
ll4
For SILAS sizes 1–3 base-plate or bus-moun-ting disconnector with screw-type terminal
For SILAS size 00 base-plate or bus-mountingdisconnector with screw-type terminal
ll12
ll13
ll11
ll10
Order details
19
WEBERS ILAS
Technical details 21 Dimensions 23
Current transformer installation for SILAS sizes 00–3
Description Item NoSizeIe A Pack
Assembly kit complete, without current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersassembly kit for installation of current transformersset = 3 pieces
Terminalfor voltage overcurrent interrupter, set = 3 piecessize 00 for M8, tab 6,3 x 0,8sizes 1–3 for M10/M12, tab 6,3 x 0,8
Sep. current transformers class 1incl. designation materialRange Output 100/5 class 1 2 VA150/5 class 1 2,5 VA250/5 class 1 3,75 VA400/5 class 1 3,75 VA600/5 class 1 5 VA
Sep. current transformers class 0,5s non-calibratedincl. designation materialRange Output 300/5 class 0,5s 2,5 VA600/5 class 0,5s 2,5 VA
Sep. current transformers class 0,5s calibratedincl. designation materialRange Output 300/5 class 0,5s 2,5 VA600/5 class 0,5s 2,5 VA
Terminal housing coverto cover cable lugfor SILAS size 00 2 are requiredfor SILAS size 1 2 are requiredfor SILAS size 2 3 are requiredfor SILAS size 3 3 are required
00123
001–3
00123
150250400600
100150250400600
300600
300600
S-00SWBS-1SWBS-2SWBS-3SWB
AST125V-AT12
100K1150K1250K1400K1600K1
300K05600K05
300K05G600K05G
S-00ARAS-1ARAS-2ARAS-3ARA
707.043.010707.044.010707.045.010707.045.020
745.015.010706.070.010
706.992.010706.992.020706.992.030706.992.040706.992.050
706.992.100706.992.110
706.992.120706.992.130
707.041.010707.041.020707.041.030707.041.040
SetSetSetSet
SetSet
11111
33
33
1111
Type Weight
0.4530.6850.8770.960
0.0090.015
0.2400.2400.2400.2400.240
0.3800.380
0.3850.385
0.0310.0630.0920.108
ll1ll2ll3ll4
ll5ll6
ll7
ll8
ll9
ll10
ll11
ll12
ll13
Overview of accessories
20
WEBERS ILAS
Size 00 Size 1 Size 2 Size 3
Attachment on top-hat rail • •Bracing profile, lateral • • • •Terminal housing cover • • • •Clamp connector for Cu conductors • • • •Prism terminal for Cu/Al conductors • • • •Prism terminal for 2 conductors • • •Installation kit for current transformer • • • •Installation kit for AC 23 • • •Positional indicator for switching cover • • • •Electronic fuse monitoring • • • •Terminal extension • • •
00–3 SILAS S
00–3 Device sizes 00, 1, 2, 3
00–3 NH 00–3 mounted on base plates empty00–3 Bus-mounting disconnectors R
00–3 Standard with blow-out plate empty1–3 High switching capacity H
00–3 Screw-type terminal empty00 Box terminal R
00 Installation depth 32 mm* empty00 Installation depth 70 mm* T
00–3 60 mm busbar spacing empty00–1 40 mm busbar spacing V
00–3 Without fuse monitoring empty00–3 With fuse monitoring SU
The materials used in SILAS are free of asbestos and of ceramic fibers. They contain neither chlorofluorocarbons (CFC),polychlorobiphenyl (PCB) and their isomers nor radioactive materials or mercury. All plastic parts are halogen free, flame retardant and release no hydrochloric acid when exposed to external sources of fire.
S RSize H R T V SU
Type designation for base-plate mounting
* = Sizes 1–3 same model for 32 and 70 mm
Technical details
21
WEBERS ILAS
SILAS HRC fuse-switch-disconnectors sizes 00–3 for mounting on base plates and for bus-mounting
Size Unit
Rated operational currents Ie A
Rated operational voltage Ue Vac
Rated insulation voltage Ui Vac
Rated surge withstand capacity Uimp kV
Ratedfrequence Hz
Categorie of useaccording to EN 60947-3at 500 Vacat 690 Vac
Rated conditional short-circuit currentwith fuse protection kA
Rated short-circuit making capacity Icm
with fuse kA
Mechanical lifenumber of switching cycles n
Electrical lifenumber of switching cycles n
Fuse linkmax. permissible powerloss W
Ambient temperature Tv °C
Degree of protection according to IEC 529On front side Operating state ET 32 mmOn front side Operating state ET 70 mmOn front side Switching cover open
Terminals:
Screw-type terminal
Clamp connector Cu mm2
Prism terminal Al/Cu mm2
Box terminal mm2
Tightening torque levels:
Screw-type terminal Nm
Clamp connector/Prism terminal Nm
Input terminal busbar Nm
Box terminal Nm
DIN00
160
690
1000
8
50…60
S
AC-23BAC-21B
50
50
1400
200
12
–20 bis 60
IP20IP30IP10
M8
6 – 70
6 – 70
4 – 70
12
3
6
4.5
DIN1
250
690
1000
8
50…60
S SH
AC-22B AC-23BAC-22B AC-23B
50
50
1400
200
23
–20 bis 60
IP20IP30IP10
M10
70 – 150
70 – 150
–
20
6
6
–
DIN2
400
690
1000
8
50…60
S SH
AC-22B AC-23BAC-22B AC-23B
50
50
800
200
34
–20 bis 60
IP20IP30IP10
M10
120 – 240
120 – 240
–
20
8
8
–
DIN3
630
690
1000
8
50…60
S SH
AC-22B AC-23BAC-22B AC-23B
50
50
800
200
48
–20 bis 60
IP20IP30IP10
M12
150 – 300
150 – 300
–
30
8
8
–
S = Standard SH = high switching capacity ET = Installation depth
Dimensions
22
WEBERS ILAS
SILAS for mounting on base plates, sizes 1–3
* = Fuse monitoring = in sizes 00–3
Fastening massType A
S1S2S3
184210250
474742
576580
150166195
B C D S1 S2/S3
33 33
37
106
194
37
67
6146
106
194
27
16
7.5ø8
46 3
80
194
28*
8
130
326
6
16 M8
184
6640
25
ø7
9712.5
7513
C C
B
A
B
32
70
110
298
4
M10
185
72
423
90
70
130
298
30
4
32
209
59
4
288
Gr. 2 = M10Gr. 3 = M12 D
25
164
25
ø11
57 33
184 106
40
57 33
40
104
70
40
194
M8
6
6
3
32
97
65
40
40
6
110
70
M10
298
23
4
4
32
21
158
97
40
40
SILAS for bus mounting with 40 mm busbar spacing
SR00TVSR00RTV
SR1V
S00/S00R S00-PEN, …SU …SU Fastening mass
SILAS for mounting on base plates, size 00
Dimensions
23
WEBERS ILAS
SILAS 00 for bus mounting with 60 mm busbar spacing
Current transformer installation, sizes 1–3
SR… SR1 SR2/SR3
33 33
194
37
37
60
60
21 104
40
194
M8
70 3
60
6071
91
6
6
184
21 104
6
6
32
194
91
60
60
21 110
23
298
M10
70
32
158
60
6098
4
4
21 130
30
298
Gr. 3 = M12
4
4
90
7032
60
60288
110
158
Gr. 2 = M10
10
116
68
30
44
70
37A
12 33
Type A
SR1SR2SR3
184210250
424747
576580
B C
Type A
SR1SR2SR3
456060
SR00… Installation depth 70 mm Installation depth 32 mm
C C
A
B
60
60
B
Current transformer installation, size 00
SILAS 1–3 for bus mounting with 60 mm busbar spacing
WEBER
WEBER AGElektrotechnikSedelstrasse 2CH-6021 EmmenbrückeSchweiz/SwitzerlandTel. +41 41 269 90 00Fax +41 41 269 92 97Internet: www.weber.chEmail: [email protected]
Office
WEBER SAElectrotechniqueVerdeaux 4CH-1020 RenensSchweiz/SwitzerlandTel. +41 21 671 16 16Fax +41 21 671 16 17Internet: www.weber.chEmail: [email protected]
Other companies
WEBER Nederland B.V.Postbus 30NL-7740 AA CoevordenNiederlande/NetherlandsTel. +31 524 59 58 00Fax +31 524 51 22 49
WEBER DeutschlandWemat GmbHBahnhofstrasse 30DE-49824 LaarDeutschland/GermanyTel. +49 594 79 20 22Fax +49 594 79 20 21
KAWETRA Kft.HU-7400 Kaposvár, Guba S. u. 38.HU-7401 Kaposvár, Pf.: 28Ungarn/HungaryTel. +36 82 416 020Fax +36 82 410 419
WEBER Myslakowice Sp.z o.o.ul. Jeleniogórska 4PL-58-533 MyslakowicePolen/PolandTel. +48 75 713 1024Fax +48 75 713 1018
Traders: