· Web viewHousing is symmetrical allowing for left and right hand motor locations and for viewing...

SECTION 11131FRONT PROJECTION SCREENS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2018 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Manually operated, surface mounted, front projection screens.

B. Electrically operated, surface mounted, front projection screens.

C. Manually operated, ceiling recessed, front projection screens.

D. Electrically operated, ceiling recessed, front projection screens.

1.2 RELATED SECTIONS

A. Division 5 - Metal Fabrications: Suspension systems for projection screens.

B. Section 06400 - Interior Architectural Woodwork: Wood trim for recessed screen installation.

C. Section 09120 - Ceiling Suspension System: Supports and trim for suspended ceilings.

D. Section 09210 - Gypsum Plaster: Ceiling for recessed screen installation.

E. Section 09260 - Gypsum Board Assemblies: Ceiling for recessed screen installation.

F. Section 09510 - Acoustical Ceilings: Ceiling for recessed screen installation.

G. Division 16 for electrical wiring, connections, and installation of remote control switches for electrically operated projection screens.

1.3 REFERENCES

A. NFPA 70 - National Electrical Code.

B. NFPA 701-99 - Fire Tests for Flame-Resistant Textiles and Films.

C. GREENGUARD Environmental Institute Children & Schools.

D. US Green Building Council.

E. Cradle to Cradle Certified - Cradle to Cradle Products Innovation Institute.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

11131-1

B. [Product Data]: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Wiring diagram for electrically operated units.

D. Shop Drawings: Shop drawings showing layout and types of projection screens. Show the following:1. Location of screen centerline.2. Location of wiring connections.3. Seams in viewing surfaces.4. Detailed drawings for concealed mounting.5. Connections to suspension systems.6. Anchorage details.7. Accessories.8. Frame details.

E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

F. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

A. Single Source Responsibility: Obtain each type of projection screen required from a single manufacturer as a complete unit, including necessary mounting hardware and accessories.

B. Coordination of Work: Coordinate layout and installation of projection screens with other construction supported by, or penetrating through, ceilings, including light fixtures, HVAC equipment, fire-suppression system, and partitions.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Do not deliver projection screens until building is enclosed and other construction where screens will be installed is substantially complete.

B. Store products in manufacturer's unopened packaging until ready for installation.

C. Protect screens from damage during delivery, handling, storage, and installation.

1.7 COORDINATION

A. Coordinate work with installation of ceilings, walls, electric service power characteristics, and location.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Draper Inc., which is located at: 411 S. Pearl P. O. Box 425; Spiceland, IN 47385-0425; Toll Free Tel: 800-238-7999; Tel: 765-987-7999; Fax: 866-637-5611; Email:request info ([email protected]); Web:www.draperinc.com

B. Substitutions: Not permitted.

11131-2

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 MANUALLY OPERATED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

A. Silhouette/Series M: Spring roller operated, extruded aluminum case. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. System Options:

a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall mount Z-clips.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish.i. No projected mounting bracket required.j. Auto Return spring roller with built-in inertia reduction mechanism to ensure

viewing surface retracts slowly, smoothly and quietly into case. Provide intermediate stop positions.

2. Projection Viewing Surface:a. Matt White XT1000E - On Axis gain of 1.0. 180 degree viewing cone.

Washable surface. GREENGUARD Gold certified.b. Glass Beaded CH3200E - On Axis gain of 3.2 with narrow viewing cone.

Flame and mildew resistant.c. Argent White XH1500E - On Axis gain of 1.5. High reflectivity fabric with broad

viewing cone. Excellent resolution and color balance. Flame and Mildew resistant.

d. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone. GREENGUARD Gold certified.

e. Ecomatt XT700E - On Axis gain of 0.7. PVC free viewing surface made of 100 percent polyester yarn. Ecomatt is fully recyclable. Flame and mildew resistant. GREENGUARD Gold certified. Cradle to Cradle - Silver certified.

3. Viewing Area H x W.a. Audio Visual Format.

1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 72 inches x 96 inches (1829 mm x 2438 mm).7) 96 inches x 96 inches (2438 mm x 2438 mm).

b. NTSC Format (4:3). Black masking borders standard.1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435

mm).2) 7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689

mm).3) 100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032

mm).4) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).

c. HDTV Format (16:9). Black masking borders standard.1) 65 inch (1651 mm) 31-3/4 inches x 56-1/2 inches (806 mm x 1435 mm).2) 73 inch (1854 mm) 36 inches x 64 inches (914 mm x 1626 mm).

11131-3

3) 82 inch (2083 mm) 40-1/2 inches x 72 inches (1029 mm x 1829 mm).4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032


mm).d. 16:10 Format. Black masking borders standard.

1) 67 inch (1702 mm) diagonal, 35-1/4 inches x 56-1/2 inches (895 mm x 1435 mm).

2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches.3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829


mm).5) 109 inch (2769 mm) diagonal, 57-1/2 inches x 92 inches (1461 mm x

2337 mm).4. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top

border matching the viewing surface.5. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a

black masking top border.

B. Silhouette/Series C: Crank operated, tab tensioned, extruded aluminum case. Wall or ceiling mounted screen system. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. System Options:

a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall mount Z-clips.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish

2. Projection Viewing Surface:a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone.

GREENGUARD Gold certified.b. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color

reproduction. GREENGUARD Gold certified.c. Pearl White CH1900V - On Axis gain of 1.9. Matt white surface with reflective

pearlescent coating.3. Tab-Tensioning System:

a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable.

b. Viewing surface inserted into aluminum bottom dowel.4. Viewing Area H x W.

a. Audio Visual Format.1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 72 inches x 96 inches (1829 mm x 2438 mm).6) 96 inches x 96 inches (2438 mm x 2438 mm).

b. NTSC Format (4:3). Black masking borders standard.

11131-4

1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).

2) 7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).

3) 100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).

4) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).c. HDTV Format (16:9). Black masking borders standard.



5. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching the viewing surface.

6. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black masking top border.

C. Artisan/Series M: Spring roller operated, hardwood or plastic laminate case. Roller is steel with heavy-duty spring and steel endcaps.1. System Options:

a. Hardwood Case.1) Styles.

a) Radius.b) Rectilinear.c) Traditional.d) Bevel.

2) Solid Hardwood Case Material.a) Natural Maple.b) Natural Cherry.c) Light Oak.d) Medium Oak.e) Walnut.f) Medium Cherry.g) Mahogany.h) Custom Wood _________.

b. Plastic Laminate Case (7/16 inch particleboard, 45 lb. Density, rectilinear styling).1) White.2) Beige3) Dove Grey.4) Burgundy.5) Black.6) Custom Color _________.

c. Mounting.1) Ceiling.2) Wall.





d. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone.

11131-5

GREENGUARD Gold certified.e. Ecomatt XT700E - On Axis gain of 0.7. PVC free viewing surface made of 100

percent polyester yarn. Ecomatt is fully recyclable. Flame and mildew resistant. GREENGUARD Gold certified. Cradle to Cradle - Silver certified.



b. NTSC Format (4:3). Black masking border standard.1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435




c. HDTV Format (16:9). Black masking border standard.1) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032




2) 109 inch (2769 mm) diagonal, 57-1/2 inches x 92 inches (1461 mm x 2337 mm).


5. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.

D. Luma 2: Heavy duty, spring roller operated, steel case. Pentagonal, flat back design, steel case with scratch-resistant white textured finish. Universal hanging brackets for attachment to wall or ceiling. Case 22 gauge steel with matching end caps with integral roller brackets.1. System Options:

a. Projected Adjustable Mounting Brackets with a 18-1/2 to 24 inch (470 to 610 mm) clearance from wall. White finish.

b. Fixed Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. White finish.

c. Fixed Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from wall. White finish.

d. No projected mounting bracket required.e. Auto Return spring roller with built-in inertia reduction mechanism to ensure


f. Aluminum Operating Pole:1) 4 feet.2) 6 feet.3) None.


11131-6







1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 72 inches x 96 inches (1829 mm x 2438 mm).7) 96 inches x 96 inches (2438 mm x 2438 mm).8) 7 feet x 9 feet (2.13 m x 2.74 m).9) 9 feet x 9 feet (2.74 m x 2.74 m).10) 8 feet x 10 feet (2.44 m x 3.05 m).11) 10 feet x 10 feet (3.05 m x 3.05 m).12) 9 feet x 12 feet (2.74 m x 3.66 m).13) 12 feet x 12 feet (3.66 m x 3.66 m).

b. NTSC Format (4:3). Black masking borders standard.1) 100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032

mm).2) 10 foot (3.05 m) diagonal, 69 inches x 92 inches (1753 mm x 2337 mm).3) 11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642


mm).5) 15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556

mm).c. HDTV Format (16:9). Black masking borders standard.






d. 16:10 Format. Black masking borders standard.1) 94 inch (2438 mm) diagonal, 50 inches x 80 inches (1270 mm x 2032


2337 mm).3) 123 inch (3124 mm) diagonal, 65 inches x 104 inches (1351mm x 2642

mm).4) 137 inch (3480) diagonal, 72-1/2 inches x 116 inches (1842 mm by 2946

11131-7

mm).5) 165 inch (4191 mm) diagonal, 87-1/2 inches x 140 inches (2223 mm by




E. Luma: Spring roller operated, steel case. Pentagonal, flat back design, steel case with scratch-resistant white textured finish. Universal hanging brackets for attachment wall or ceiling. Case 22-gauge steel with end caps finished to match case. End caps with integral roller brackets connected to roller ends.1. System Options:

a. Projected Adjustable Mounting Brackets with a 18-1/2 to 24 inch (470 to 610 mm) clearance from wall. White finish.

b. Fixed Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. White finish.

c. Fixed Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from wall. White finish.

d. No projected mounting bracket required.e. Auto Return spring roller with built-in inertia reduction mechanism to ensure


f. T-Bar Twist Clips. Not recommended for screens over 70 inches x 70 inches (1778 mm x 1778 mm).









b. NTSC Format (4:3). Black masking border is standard.1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435



mm).4) 10 foot diagonal (3.05 m), 72 inches x 96 inches (1829 mm x 2438 mm).

11131-8

c. HDTV Format (16:9). Black masking border is standard.1) 65 inch (1651 mm) diagonal, 31-3/4 inches (806 mm) x 56-1/2 inches

(1435 mm).2) 73 inch (1854 mm) diagonal, 36 inches (914 mm) x 64 inches (1626

mm).3) 82 inch (2083 mm) diagonal, 40-1/2 inches (1029 mm) x 72 inches (1829










black top border.

2.3 MANUALLY OPERATED, CEILING RECESSED, FRONT PROJECTION SCREENS

A. Access/Series M: Spring roller operated, extruded aluminum case. Ceiling-recessed, extruded aluminum housing, 6-5/8 inches (182 mm) deep and 6-5/8 inches (182 mm) wide with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space". Bottom closure panel forms slot for passage of viewing surface and is removable for access to viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels or gypsum board ceiling. Housing designed to be installed separately from roller/viewing surface assembly. Factory or site installed roller: steel tube with heavy-duty spring and mounted on zinc plated brackets with double row radial ball bearings. Viewing surface securely attached to roller at top and at bottom hemmed around steel dowel. Provide with pull cord.1. System Options:

a. Auto Return spring roller with built-in inertia reduction mechanism to ensure viewing surface retracts slowly, smoothly and quietly into case. Provide intermediate stop positions.







11131-9












3) 119 inch (3023 mm) diagonal, 58 inches x 104 inches (1473 mm x 2642 mm)










black top border.6. Provide with optional 4 foot (1.22 m) aluminum operating pole.

11131-10

7. Provide with optional 6 foot (1.83 m) aluminum operating pole.

B. Apex: Spring roller operated. Apex manually operated, institutional quality, screen expressly designed for concealed installation. Extruded U shaped extruded aluminum case, 4-1/2 inches (114 mm) high and 4-1/2 inches (114 mm) wide. The case installs above the ceiling and is provided with a closure panel at the bottom of the screen surface, which seals the ceiling opening when the screen is retracted. A trim flange surrounds the perimeter of the screen case to finish the installation in a suspended or drywall ceiling. Bottom of case and closure are furnished in ceiling white.1. Projection Viewing Surface:

a. Matt White XT1000E - On Axis gain of 1.0. 180 degree viewing cone. Washable surface. GREENGUARD Gold certified.

b. Glass Beaded CH3200E - On Axis gain of 3.2 with narrow viewing cone. Flame and mildew resistant.

c. Argent White XH1500E - On Axis gain of 1.5. High reflectivity fabric with broad viewing cone. Excellent resolution and color balance. Flame and Mildew resistant.









c. HDTV Format (16:9). Black masking borders standard.1) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032






4. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a black top border.

2.4 MOTORIZED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

11131-11

A. Artisan/Series V: Electric motor operated, hardwood or plastic laminate case, tab tensioned. Wall or ceiling mounted. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Case Options:

a. Hardwood Case1) Styles.




2. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.

3. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.

4. Motor Screen Controls, UL certified.a. Single station control rated 115V AC, 60 Hz with 3-position rocker switch with

cover plate to stop or reverse screen at any point.b. Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches

with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.

c. Low voltage control unit with three button 24V switches and cover plate to stop or reverse screen at any point.

d. Low voltage 24V control unit with hand held RF remote three button control switch to stop or reverse screen at any point.

e. Low voltage 24V control unit with hand held IR remote three button control switch to stop or reverse screen at any point.

f. Key Operated power supply switch to control power to control system.g. Locking switch cover plate for limited access to three position switch.h. Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse

screen at any point.i. Key operated 3-position low voltage control switch rated 24V to stop or reverse

screen at any point.j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.

11131-12

m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.




pearlescent coating.d. TecVision XH900X Grey - On Axis gain of 0.9. 180 degree viewing cone.

Provides very good contrast and color reproduction. 4K ready.e. TecVision MS1000X Grey - On Axis gain of 1.0. 70 degree viewing cone.

Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 4K ready.

f. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready reference screen surface for blending applications, precise resolution, and color accuracy.

g. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready.

h. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready.

i. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 4K ready.

6. Tab-Tensioning System:a. Viewing surface with integrated tabs and cable on each side of fabric to provide

tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Viewing surface inserted into aluminum bottom dowel.

7. Viewing Area H x W.a. Audio Visual Format. Black masking borders are standard.

1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 72 inches x 96 inches (1829 mm x 2438 mm).6) 96 inches x 96 inches (2438 mm x 2438 mm).









2) 109 inch (2769 mm) diagonal, 57-1/2 inches x 92 inches (1461 mm x

11131-13


border matching viewing surface color.9. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a


B. Artisan/Series E: Electric motor operated, hardwood or plastic laminate case. Wall or ceiling mounted. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Case Options:

a. Hardwood Case1) Styles.




2. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

3. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.








screen at any point.

11131-14

i. Key operated 3-position low voltage control switch rated 24V to stop or reverse screen at any point.

j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.




















C. Silhouette/Series V: Electric motor operated, extruded aluminum case, tab tensioned. Wall or ceiling mounted. Contoured aluminum case with removable front cover, which conceals all

11131-15

mounting devices and fasteners including viewing surfaces that retract completely inside the case.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.










screen at any point.j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.

4. System Options:a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10/14 inch (254/356 mm) clearance from

wall.f. Wall Mount: Z-clip.g. Projected mounting brackets shall have a white finish.h. Projected mounting brackets shall have a black finish







f. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 4K ready reference screen surface for

11131-16

blending applications, precise resolution, and color accuracy.g. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone.

Imaging Science Foundation certified. 4K ready.h. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone.

Imaging Science Foundation certified. 4K ready.i. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone.

Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 4K ready.









c. HDTV Format (16:9). Black masking borders standard.1) 65 inch (1651 mm) 31-3/4 inches x 56-1/2 inches (806 mm x 1435 mm).2) 73 inch (1854 mm) 36 inches x 64 inches (914 mm x 1626 mm).3) 82 inch (2083 mm) 40-1/2 inches x 72 inches (1029 mm x 1829 mm).4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032










D. Silhouette/Series E: Electric motor operated, extruded aluminum case. Contoured aluminum case with removable front cover, which conceals all mounting devices and fasteners including viewing surfaces that retract completely inside the case.

11131-17

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.











4. System Options:a. Contoured aluminum case finished in a white color.b. Contoured aluminum case finished in a light grey color.c. Contoured aluminum case finished in a black color.d. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.e. Projected Mounting Brackets with a 10 to 14 inch (254 to 356 mm) clearance

from wall.f. Projected mounting brackets shall have a white finish.g. Projected mounting brackets shall have a black finish








1) Provide with black border option.

11131-18
















E. Premier: Electric motor operated, pentagonal-shaped steel case, tab tensioned. Metal roller mounted on rubber isolation mounts. Case for sizes through 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, is one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Case for sizes above 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, consists of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. Case and tensioning dowel finished in flat black.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,







d. Low voltage 24V control unit with hand held RF remote three button control

11131-19

switch to stop or reverse screen at any point.e. Low voltage 24V control unit with hand held IR remote three button control

switch to stop or reverse screen at any point.f. Key Operated power supply switch to control power to control system.g. Locking switch cover plate for limited access to three position switch.h. Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse



4. System Options:a. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.

Finished black.b. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.

5. Projection Viewing Surface: Mildew resistant 100 percent vinyl with black masking borders and 12 inch (305 mm) black drop.a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone.












7. Viewing Area H x W. Black masking borders standard. 12 inch (305 mm) black drop standard.a. Audio Visual Format.

1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 72 inches x 96 inches (1829 mm x 2438 mm).

11131-20

6) 96 inches x 96 inches (2438 mm x 2438 mm).7) 7 feet x 9 feet (2.13 m x 2.74 m).8) 9 feet x 9 feet (2.74 m x 2.74 m).9) 8 feet x 10 feet (2.44 m x 3.05 m).10) 10 feet x 10 feet (3.05 m x 3.05 m).11) 9 feet x 12 feet (2.74 m x 3.66 m).12) 12 feet x 12 feet (3.66 m x 3.66 m).13) 10 feet, six inches x 14 feet (3.2 m x 4.27 m)14) 14 feet x 14 feet (4.27 m x 4.27 m)15) 12 feet x 16 feet (3.66 m x 4.88 m)

b. NTSC Format (4:3).1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435







mm).9) 210 inch (5.33 m) diagonal, 126 inches x 168 inches (3200 mm x 4267




mm).c. HDTV Format (16:9).










10) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4267 mm).

11) 220 inch (5.59 m) diagonal, 108 inches x 192 inches (2743 mm x 4877

11131-21









3556 mm).9) 189 inch (4800 mm) diagonal, 100 inches x 160 inches (2540 mm x 4064



mm).8. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top



F. Targa: Electric motor operated, steel case. Cases for sizes through 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10, are one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Cases for sizes above 12 feet x 12 feet AV, 200 inch NTSC, 184 inch HDTV and 189 inch 16:10 consists of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. White scratch resistant textured finish.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db. UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.









11131-22


j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.

4. System Options:a. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall.

Finished white.b. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.








1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 72 inches x 96 inches (1829 mm x 2438 mm).7) 96 inches x 96 inches (2438 mm x 2438 mm).8) 7 feet x 9 feet (2.13 m x 2.74 m).9) 9 feet x 9 feet (2.74 m x 2.74 m).10) 8 feet x 10 feet (2.44 m x 3.05 m).11) 10 feet x 10 feet (3.05 m x 3.05 m).12) 9 feet x 12 feet (2.74 m x 3.66 m).13) 12 feet x 12 feet (3.66 m x 3.66 m).14) 14 feet x 14 feet (4.27 m x 4.27 m).15) 12 feet x 16 feet (3.66 m x 4.88 m).16) 16 feet x 16 feet (4.88 m x 4.88 m).






mm).

11131-23

7) 15 foot (4.57 m) diagonal, 105 inches x 140 inches (2667 mm x 3556 mm).


9) 210 inch (5.33 m) diagonal, 126 inches x 168 inches (3200 mm x 4268 mm).


c. HDTV Format (16:9). Black masking borders standard.1) 65 inch (1651 mm) diagonal, 31-3/4 inch by 56-1/2 inch (781 mm by

1435 mm).2) 73 inch (1854 mm) diagonal, 36 inches x 64 inches (3) 82 inch (2083 mm) diagonal, 40-1/2 inches x 72 inches (4) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032






mm).10) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4268




2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829












11131-24

2.5 MOTORIZED, CEILING RECESSED, FRONT PROJECTION SCREENS

A. Signature/Series V: Electric motor operated, extruded aluminum case, independently motorized closure, tab tensioned. Screen case extruded aluminum, white finish. UL approved "Suitable for use in environmental air space." Case size, 9-3/4 inches (248 mm) deep and 9-1/8 inches (232 mm) wide for screen sizes through 144 inches wide; 11 inches (279 mm) x 9-1/8 inches (232 mm) for larger screen sizes. Bottom of case fully enclosed by aluminum panels and motorized aluminum trap door with concealed hinges. Trap door supported entirely along front and back edges without crack around perimeter of door. Trap door opens into case when screen is lowered. Closure panels screw-attached to case and may be removed manually for access to roller and drive assembly.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,



















11131-25







1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 72 inches x 96 inches (1829 mm x 2438 mm).6) 96 inches x 96 inches (2438 mm x 2438 mm).7) 7 feet x 9 feet (2.13 m x 2.74 m).8) 9 feet x 9 feet (2.74 m x 2.74 m).9) 8 feet x 10 feet (2.44 m x 3.05 m).10) 10 feet x 10 feet (3.05 m x 3.05 m).11) 9 feet x 12 feet (2.74 m x 3.66 m).12) 12 feet x 12 feet (3.66 m x 3.66 m).13) 10 feet 6 inches x 14 feet (3.20 m x 4.27 m).14) 14 feet x 14 feet (4.27 m x 4.27 m).15) 12 feet x 16 feet (3.66 m x 4.88 m).







mm).8) 200 inches (5.08 m) diagonal, 118 inches x 158 inches (2997 mm x 4013






1) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032

11131-26





mm).6) 184 inches (4.67 m) diagonal, 90 x 160 inches (2286 mm x 4064 mm).7) 193 inches (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x

4267 mm).8) 220 inches (5.59 m) diagonal, 108 inches x 192 inches (2743 mm x 4877




3) 123 inch (3124 mm) diagonal, 65 inches x 104 inches (1351mm x 2642 mm).

4) 137 inch (3480) diagonal, 72-1/2 inches x 116 inches (1842 mm by 2946 mm).

5) 165 inch (4191 mm) diagonal, 87-1/2 inches x 140 inches (2223 mm by 3556 mm).






B. Signature/Series E: Electric motor operated, extruded aluminum case, independently motorized closure. Extruded aluminum case, finished white. UL approved "Suitable for use in environmental air space." Case size 9-3/4 inches (248 mm) deep and 9-1/8 inches (232 mm) wide for screen sizes through 144 inches wide; 11 inches (279 mm) x 9-1/8 inches (232 mm) for larger screen sizes. Bottom of case fully enclosed by aluminum panels and motorized aluminum trap door with concealed hinges. Trap door supported entirely along front and back edges without crack around perimeter of door. Trap door opens into case when screen is lowered. Closure panels screw-attached to case and may be removed manually for access to roller and drive assembly. Case shall have white finish.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,





with cover plates to stop or reverse screen at any point. Automatic override

11131-27

allows only one signal to reach the motor when operated simultaneously.c. Low voltage control unit with three button 24V switches and cover plate to stop

or reverse screen at any point.d. Low voltage 24V control unit with hand held RF remote three button control

switch to stop or reverse screen at any point.e. Low voltage 24V control unit with hand held IR remote three button control

switch to stop or reverse screen at any point.f. Key Operated power supply switch to control power to control system.g. Locking switch cover plate for limited access to three position switch.h. Key operated 3-position control switch rated 115V AC, 60 Hz to stop or reverse










1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 72 inches x 96 inches (1829 mm x 2438 mm).7) 96 inches x 96 inches (2438 mm x 2438 mm).8) 7 feet x 9 feet (2.13 m x 2.74 m).9) 9 feet x 9 feet (2.74 m x 2.74 m).10) 8 feet x 10 feet (2.44 m x 3.05 m).11) 10 feet x 10 feet (3.05 m x 3.05 m).12) 9 feet x 12 feet (2.74 m x 3.66 m).13) 12 feet x 12 feet (3.66 m x 3.66 m).14) 10 feet 6 inches x 14 feet (3.20 m x 4.27 m).15) 14 feet x 14 feet (4.27 m x 4.27 m).16) 12 feet x 16 feet (3.66 m x 4.88 m).17) 16 feet x 16 feet (4.88 m x 4.88 m).



11131-28
















6) 184 inch (4.67 m) diagonal, 90 x 160 inches (2286 mm x 4064 mm).7) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4267












mm).

11131-29


6. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching screen surface color.


C. Access XL/Series E: Electric motor operated, extruded aluminum case. Case size 10-7/16 inches (265 mm) deep and 9 inches (229 mm) wide. Extruded aluminum housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and is removable for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels and trim for gypsum board ceiling. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Provided with internal junction box and plug-in wiring connections.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.a. Single station control rated 115V AC, 60 Hz with 3-position rocker switch with








screen at any point.j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted.o. Motor shall be left mounted.







3. Viewing Area H x W.

11131-30

a. NTSC Format (4:3). Black masking borders standard.1) 200 inches (508 cm) diagonal, 118 inches x 158 inches (300 x 401 cm).2) 210 inches (534 cm) diagonal, 126 inches x 168 inches (320 x 427 cm).3) 220 inches (559 cm) diagonal, 132 inches x 176 inches (335 x 447 cm).4) 240 inches (610 cm) diagonal, 141 inches x 188 inches (358 x 478 cm).5) 250 inches (635 cm) diagonal, 148 inches x 198 inches (376 x 503 cm).6) 270 inches (686 cm) diagonal, 162 inches x 216 inches (411 x 549 cm).7) 295 inches (749 cm) diagonal, 177 inches x 236 inches (450 x 599 cm).

b. HDTV Format (16:9). Black masking borders standard.1) 184 inches (467 cm) diagonal, 90 inches x 160 inches (229 x 406 cm).2) 193 inches (490 cm) diagonal, 94 1/2 inches x 168 inches (240 x 427

cm).3) 220 inches (559 cm) diagonal, 106 inches x 188 inches (269 x 478 cm).4) 248 inches (630 cm) diagonal, 121 1/2 inches x 216 inches (309 x 549

cm).5) 11 foot (3.35 m) diagonal, 78 inches x 104 inches (1981 mm x 2642


mm).7) 270 inches (686 cm) diagonal, 133 inches x 236 inches (338 x 599 cm).

c. 16:10 Format. Black masking borders standard.1) 189 inches (480 cm diagonal, 100 inches x 160 inches (254 x 406 cm).2) 198 inches (503 cm) diagonal, 105 inches x 168 inches (267 x 427 cm).3) 222 inches (564 cm) diagonal, 117 1/2 inches x 188 inches (298 x 478

cm).4) 255 inches (648 cm) diagonal, 135 inches x 216 inches (343 x 549 cm).5) 278 inches (706 cm) diagonal, 147 1/2 inches x 236 inches (375 x 599

cm).d. Audio Visual Format.

1) Provide with black border option.2) 10 feet 6 inches x 14 feet (3.20 x 4.27 cm).3) 14 feet x 14 feet (4.27 m x 4.27 m).4) 12 feet x 16 feet (3.66 m x 4.88 m).5) 16 feet x 16 feet (4.88 m x 4.88 m).6) 13 feet 6 inches x 18 feet (4.12 m x 5.49 m).7) 18 feet x 18 feet (5.49 m x 5.49 m)8) 8 feet x 20 feet (2.44 x 6.10 m)9) 15 feet x 20 feet (4.57 m x 6.10 m)10) 20 feet x 20 feet (6.10 m x 6.10 m)



D. Access XL/Series V: Electric motor operated, extruded aluminum housing, tab tensioned. Case size 10-7/16 inches (265 mm) deep and 9 inches (229 mm) wide. Extruded aluminum housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and is removable for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels or for trim for gypsum board ceilings. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Provided with internal junction box and plug-in wiring connections to allow housing.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.

11131-31

a. Single station control rated 115V AC, 60 Hz with 3-position rocker switch with cover plate to stop or reverse screen at any point.

b. Multiple station control rated 115V AC, 60 Hz with 3-position rocker switches with cover plates to stop or reverse screen at any point. Automatic override allows only one signal to reach the motor when operated simultaneously.

















3. Tab-Tensioning System.a. Viewing surface with integrated tabs and cable on each side of fabric to provide

tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Warranted for 5 years against tab separation. Viewing surface inserted into aluminum bottom dowel.

4. Viewing Area H x W.a. NTSC Format (4:3). Black masking borders standard.

1) 210 inches (534 cm) diagonal, 126 inches x 168 inches (300 cm x 427 cm).

2) 220 inches (559 cm) diagonal, 132 inches x 176 inches (335 cm x 447

11131-32

cm).3) 240 inches (610 cm) diagonal, 144 inches x 192 inches (366 cm x 488



cm).b. HDTV Format (16:9). Black masking borders standard.

1) 193 inches (490 cm diagonal, 94 1/2 inches x 168 inches (240 cm x 427 cm).

2) 220 inches (559 cm) diagonal, 108 inches x 192 inches (274 cm x 488 cm).

3) 248 inches (630 cm) diagonal, 121 1/2 inches x 216 inches (309 cm x 549 cm).

c. 16:10. Black masking borders standard.1) 198 inches (503 cm) diagonal, 105 inches x 168 inches (267 cm x 427



cm).d. Audio Visual Format. Black masking borders are standard.

1) 10 feet 6 inches x 14 feet (2.67 m x 4.27 m)2) 14 feet x 14 feet (4.27 m x 4.27 m).3) 12 feet x 16 feet (3.66 m x 4.88 m).4) 16 feet x 16 feet (4.88 m x 4.88 m).5) 13 feet 6 inches x 18 feet (4.12 m x 5.49 m).6) 18 feet x 18 feet (5.49 m x 5.49 m).

5. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with top border matching viewing surface color.


E. Paragon/Series V: Large electrically operated, tab tensioned, extruded aluminum case. Projection screen with motor in roller. Case fully enclosed except for slot allowing viewing surface passage. Roller: 6 inches (152 mm) diameter steel tube. Viewing surface securely attached to roller at top and at bottom to weighted dowel. Provided with universal mounting brackets for wall, ceiling or above ceiling mounting.1. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime

lubricated with pre-set accessible limit switches.2. Motor Screen Controls, UL certified.








11131-33


j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted.o. Motor shall be left mounted.











4. Tab-Tensioning System.a. Viewing surface with integrated tabs and cable on each side of fabric to provide

tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Warranted for 5 years against tab separation. Viewing surface inserted into aluminum bottom dowel.


1) Provide with black border option.2) 15 feet x 20 feet (4.57 m x 6.10 m).3) 20 feet x 20 feet (6.10 m x 6.10 m).4) 11 feet x 22 feet (3.35 m x 6.71 m).5) 16-1/2 feet x 22 feet (5.03 m x 6.71 m).6) 22 feet x 22 feet (6.71 m x 6.71 m).7) 12 feet x 24 feet (3.66 m x 7.32 m).8) 24 feet by 24 feet (7.32 m x 7.32 m).9) 13 feet x 26 feet (3.96 m x 7.92 m).10) 19-1/2 feet by 26 feet (5.94 m x 7.92 m).11) 14 feet x 28 feet. (4.27 m x 8.53 m)12) 21 feet x 28 feet (6.40 m x 8.53 m).

b. NTSC Format (4:3). Black masking borders standard.1) 25 foot (7.62 m) diagonal, 177 inches x 236 inches (4496 mm x 5994

mm).2) 27-1/2 foot (8.38 m) diagonal, 199 inches x 264 inches (5054 mm x 6706


11131-34

mm).4) 32-1/2 foot (991 m) diagonal, 230 inches x 308 inches (5842 mm x 7823



1) 270 inch (6858 mm) diagonal, 133 inch by 236 inch (3378 mm by 5994 mm).







F. Access/Series V: Electric motor operated, extruded aluminum housing, tab tensioned. Ceiling-recessed, extruded aluminum headbox, 9 inches (229 mm) deep and 7 inches (178 mm) wide. Extruded aluminum housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and is removable for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels or for trim for gypsum board ceilings. The Access case may be ordered in advance and the screen installed later to eliminate field damage. The screen installs in minutes. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switchesa. Single station control rated 115V AC, 60 Hz with 3-position rocker switch with









11131-35

j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted.o. Motor shall be left mounted.














1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 72 inches x 96 inches (1829 mm x 2438 mm).6) 96 inches x 96 inches (2438 mm x 2438 mm).7) 7 feet x 9 feet (2.13 m x 2.74 m).8) 9 feet x 9 feet (2.74 m x 2.74 m).9) 8 feet x 10 feet (2.44 m x 3.05 m).10) 10 feet x 10 feet (3.05 m x 3.05 m).11) 9 feet x 12 feet (2.74 m x 3.66 m).12) 12 feet x 12 feet (3.66 m x 3.66 m).





11131-36





















border matching viewing surface color.7. Provide an extra screen drop with an overall screen drop of ___ feet (___ m) with a


G. Ultimate Access/Series V: Electric motor operated, extruded aluminum case, independently motorized closure, tab tensioned. Ceiling-recessed, extruded aluminum headbox, 10 inches (254 mm) deep and 9 inches (229 mm) wide. UL approved "Suitable for use in environmental air space." Case finished white. Bottom of case consists of an independently motorized trap door that opens up inside the screen case. The trap door and the access door both hinge downward to allow access to inside of screen case. The doors remain attached to the screen case via a concealed full-length hinge. Releasing one latch at each end of screen case allows the doors to hinge downward and a prop arm at each end may be pivoted to engage with endcaps, keeping the door assembly in its fully open position. Symmetrical case allows for viewing surface to unroll from the back or front of the roller. The screen is attached to roller with roller brackets. The Ultimate Access case may be ordered in advance and the screen installed later to eliminate field damage. The screen installs in

11131-37

minutes. Metal roller mounted on rubber isolation mounts.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.

2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.




















5. Tab-Tensioning System:

11131-38

a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Viewing surface inserted into aluminum bottom dowel.

6. Viewing Area H x W.a. Audio Visual Format. Black masking borders and 12 inches (305 mm) extra

black drop are standard.1) 50 inches x 50 inches (1270 mm x 1270 mm).2) 60 inches x 60 inches (1524 mm x 1524 mm).3) 70 inches x 70 inches (1778 mm x 1778 mm).4) 84 inches x 84 inches (2134 mm x 2134 mm).5) 6 feet x 8 feet (1.83 m x 2.44 m).6) 8 feet x 8 feet (2.44 m x 2.44 m).7) 7 feet x 9 feet (2.13 m x 2.74 m).8) 9 feet x 9 feet (2.74 m x 2.74 m).9) 8 feet x 10 feet (2.44 m x 3.05 m).10) 10 feet x 10 feet 3.05 m x 3.05 m).11) 9 feet x 12 feet (2.74 m x 3.66 m).12) 12 feet x 12 feet (3.66 m x 3.66 m).

b. NTSC Format (4:3). Black masking borders and 12 inches (305 mm) extra black drop are standard.1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435






mm).c. HDTV Format (16:9). Black masking borders and 12 inches (305 mm) extra

black drop are standard.1) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032










11131-39





H. Access/Series E: Electric motor operated, extruded aluminum case. Ceiling-recessed, extruded aluminum headbox 9 inches (229 mm) deep and 7 inches (178 mm) wide. Extruded aluminum housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and is removable for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels and trim for gypsum board ceiling. The Access case may be ordered in advance and the screen installed later to eliminate field damage. The screen installs in minutes. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db. UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.












Flame and mildew resistant.

11131-40

c. Argent White XH1500E - On Axis gain of 1.5. High reflectivity fabric with broad viewing cone. Excellent resolution and color balance. Flame and Mildew resistant.




















mm).

11131-41








I. Ultimate Access/Series E: Electric motor operated, extruded aluminum case, independently motorized closure. Ceiling-recessed, extruded aluminum headbox, 10 inches (254 mm) deep and 9 inches (229 mm) wide. UL approved "Suitable for use in environmental air space." Case finished white. Bottom of case consists of an independently motorized trap door that opens up inside the screen case. The trap door and the access door both hinge downward to allow access to inside of screen case. The doors remain attached to the screen case via a concealed full-length hinge. Releasing one latch at each end of screen case allows the doors to hinge downward and a prop arm at each end may be pivoted to engage with endcaps, keeping the door assembly in its fully open position. Symmetrical case allows for viewing surface to unroll from the back or front of the roller. The screen is attached to roller with roller brackets. The Ultimate Access case may be ordered in advance and the screen installed later to eliminate field damage. The screen installs in minutes. Metal roller mounted on rubber isolation mounts.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,

rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.

2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.









screen at any point.j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.

11131-42

l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.








1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 72 inches x 96 inches (1829 mm x 2438 mm).7) 96 inches x 96 inches (2438 mm x 2438 mm).8) 7 feet x 9 feet (2.13 m x 2.74 m).9) 9 feet x 9 feet (2.74 m x 2.74 m).10) 8 feet x 10 feet (2.44 m x 3.05 m).11) 10 feet x 10 feet 3.05 m x 3.05 m).12) 9 feet x 12 feet (2.74 m x 3.66 m).13) 12 feet x 12 feet (3.66 m x 3.66 m).

b. NTSC Format (4:3). Black masking borders and 12 inches (305 mm) extra black drop are standard.1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435






mm).c. HDTV Format (16:9). Black masking borders and 12 inches (305 mm) extra

black drop are standard.1) 92 inch (2337 mm) diagonal, 45 inches x 80 inches (1143 mm x 2032



mm).

11131-43



d. 16:10 Format. Black masking borders standard.1) 67 inch (1702 mm) diagonal, 35-1/4 inches x 56-1/2 inches (895 mm x

1435 mm).2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches.3) 85 inch (2159 mm) diagonal, 45 inches x 72 inches (1143 mm x 1829









J. Envoy: Electric motor operated, ceiling-recessed, trap door ceiling closure. Ceiling-recessed headbox of composite wood, finished black, 7-9/16 inches (192 mm) deep and 7-9/16 inches (192 mm) wide.1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified,











screen at any point.j. Group low voltage control unit to control ___ motorized screens.k. Video Interface Control for use with equipment with a 115V switched outlet.l. Video Interface Control for use with equipment with a 12V switched outlet.m. Video Interface Control for use with equipment with a 6V switched outlet.

11131-44

n. Motor shall be right mounted (screen will be reverse rolled).o. Motor shall be left mounted.








1) Provide with black border option.2) 50 inches x 50 inches (1270 mm x 1270 mm).3) 60 inches x 60 inches (1524 mm x 1524 mm).4) 70 inches x 70 inches (1778 mm x 1778 mm).5) 84 inches x 84 inches (2134 mm x 2134 mm).6) 6 feet x 8 feet (1.83 m x 2.44 m).7) 8 feet x 8 feet (2.44 m x 2.44 m).8) 7 feet x 9 feet (2.13 m x 2.74 m).9) 9 feet x 9 feet (2.74 m x 2.74 m).10) 8 feet x 10 feet (2.44 m x 3.05 m).11) 10 feet x 10 feet (3.05 m x 3.05 m).12) 9 feet x 12 feet (2.74 m x 3.66 m).13) 12 feet x 12 feet (3.66 m x 3.66 m).













11131-45









K. Paragon/Series E: Large electrically operated, extruded aluminum case. Projection screen with motor in roller. Case fully enclosed except for slot allowing viewing surface passage. Roller: 6 inches (152 mm) diameter steel tube. Viewing surface securely attached to roller at top and at bottom to weighted dowel. Provided with universal mounting brackets for wall, ceiling or above ceiling mounting. The viewing surface is concealed when not in use; lower it to any position at the touch of a switch.1. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime














11131-46




1) Provide with black border option.2) 15 feet x 20 feet (4.57 m x 6.10 m).3) 20 feet x 20 feet (6.10 m x 6.10 m).4) 11 feet x 22 feet (3.35 m x 6.71 m).5) 16-1/2 feet x 22 feet (5.03 m x 6.71 m).6) 22 feet x 22 feet (6.71 m x 6.71 m).7) 12 feet x 24 feet (3.66 m x 7.32 m).8) 24 feet by 24 feet (7.32 m x 7.32 m).9) 13 feet x 26 feet (3.96 m x 7.92 m).10) 19-1/2 feet by 26 feet (5.94 m x 7.92 m).11) 14 feet x 28 feet. (4.27 m x 8.53 m)12) 21 feet x 28 feet (6.40 m x 8.53 m).

b. NTSC Format (4:3). Black masking borders standard.1) 25 foot (7.62 m) diagonal, 177 inches x 236 inches (4496 mm x 5994

mm).2) 27-1/2 foot (8.38 m) diagonal, 199 inches x 264 inches (5054 mm x 6706


mm).4) 32-1/2 foot (991 m) diagonal, 230 inches x 308 inches (5842 mm x 7823


mm).c. 16:10 Format. Black masking borders standard.

1) 278 inch (7061mm) diagonal, 147-1/2 inches x 236 inches (3747 mm x 5994 mm).









L. Rolleramic: Heavy-duty, wood composite case. Screen case: Case fabricated from 3/4 inch (19 mm) warp resistant composition wood with hinged panel for metal lined motor compartment. Bottom of case fully enclosed except for slot allowing viewing surface passage. Case finished with paint primer. 1/4 inch (6 mm) minimum steel mounted brackets wrap under bottom edge of case. Roller: 5 inches (127 mm) diameter steel tube mounted on

11131-47

zinc plated brackets with double row radial ball bearings. Viewing surface securely attached to roller at top and at bottom to weighted dowel. Provided with universal mounting brackets for wall, ceiling or above ceiling mounting. The viewing surface is concealed when not in use; lower it to any position at the touch of a switch.1. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime

















1) Provide with black border option.2) 14 feet x 14 feet (4.27 m x 4.27 m).3) 12 feet x 16 feet (3.66 m x 4.88 m).4) 16 feet by 16 feet (4.88 m x 4.88 m).5) 13 feet 6 inches x 18 feet (4.12 m x 5.49 m).6) 18 feet by 18 feet (5.49 m x 5.49 m).7) 8 feet x 20 feet. (2.44 m x 6.10 m)8) 15 feet x 20 feet (4.57 m x 6.10 m).9) 20 feet x 20 feet (6.10 m x 6.10 m).

b. NTSC Format (4:3). Black masking borders standard.

11131-48





c. 16:10 Format. Black masking borders standard.1) 94 inch (2438 mm) diagonal, 50 inches x 80 inches (1270 mm x 2032









5994 mm).10) 278 inch (7061 mm) diagonal, 147-1/2 inches x 236 inches (3747 mm x




PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. Verify rough-in openings are properly prepared.

C. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

A. Install in accordance with manufacturer's instructions.

B. Install front projection screens with screen cases in position and relationship to adjoining

11131-49

construction as indicated, securely anchored to supporting substrate, and in manner that produces a smoothly operating screen with plumb and straight vertical edges and plumb and flat viewing surfaces when screen is lowered.

C. Test manually operated units to verify that screen operating components are in optimum functioning condition

D. Test electrically operated units to verify that screen, controls, limit switches, closure and other operating components are in optimum functioning condition.

3.4 PROTECTION

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

11131-50

· Web viewHousing is symmetrical allowing for left and right hand motor locations and for viewing...

Documents

Transcript of · Web viewHousing is symmetrical allowing for left and right hand motor locations and for viewing...