“We Weigh The World!” CAS Newton-500 Series CAS Marketing Team2003. 12. 04 CAS Corporation.
-
Upload
julian-wheeler -
Category
Documents
-
view
226 -
download
9
Transcript of “We Weigh The World!” CAS Newton-500 Series CAS Marketing Team2003. 12. 04 CAS Corporation.
“We Weigh The World!” CAS
Newton-500 Series
CAS Marketing Team2003. 12. 04
CAS Corporation
“We Weigh The World!” CAS
Feature & Main Functions• Easy Operation and Various Options• RFI/EMI screened• Weight Back-up• Self-Diagnostic function for easy maintenance• Selectable Digital Filter, can be used at truck scale and hopper scale
while an unwanted fluctuated weight swing existed
• 4 Weighing modes including most useful application• Built in full duplex RS-232C with Inner Clock• Various communication mode
: Transmission in Stream, Stable only, By Command and on-demand by key• I/O control interface with 4 sets relay outputs (except Newton-501A) and
4sets optic-coupler inputs• Input total 7 signals can be flexibly selected• 6 Print Formats • Useful 3 Hold modes (Average, Peak, Sampling) and Hold by internal signal input
“We Weigh The World!” CAS
Newton-500 Series
Model Newton-501A Newton-502A Newton-505A
Sub Display X X O
External Output X 4 4
External Input 4 4 4
Application Platform scale Platform Scale, Batching Control
[ Newton-501A, 502A ] [Newton-505A ]
“We Weigh The World!” CAS
Drawing & Dimension
[ Newton-500 Series Dimension ] [ Rear ]
“We Weigh The World!” CAS
Load Cell Excitation Voltage DC 9V, 8 x 350 Ω load cells
Full Scale Input Signal 40mV, including dead load
Zero Adjust Range 0.05mV ~20mV
Input Sensitivity 1.2 /D (H-44, OIML) 0.6 /D (Non H-44, OIML)
System Linearity Within 0.01% of F.S.
A/D Internal Resolution 1/200,000
A/D External Resolution 5,000 dd(H-44, OIML)
A/D Conversion Speed Maximum 50 times/sec
A/D Part
Technical SpecificationPower AC 110V/220V, 50/60 Hz
Size 192(W) x 129(D) x 96(H)mm
Operating Temperature -10 ~ 40
Weight Approx. 2.5kg
Fuse Capacity T250mA L250V
Power Consumption Approx. 10W
PowerPart
“We Weigh The World!” CAS
Option 1 RS-422/RS-485 Serial Interface
Option 2 BCD Out
Option 3 Analog Out (I-Out, V-Out)
Option 4 Current Loop
Options
Technical Specification
Span Calibration Full Digital Calibration
Display VFD (7 digit) 6.0(W)x13.0(H)mm
Sub Display (NT-505 Only) VFD (12 digit) 3.3(W)x8.0(H)mm
Division x1, x2, x5
Display below Zero “-” Minus Signal
Permitted Limit Tare Full Capacity
DigitalPart
“We Weigh The World!” CAS
Certification
• CE Approved (2003. 10)
• OIML Pending (2004)