We can make the world better Product Information Performance Substrate After Coating Contact Angle...
Transcript of We can make the world better Product Information Performance Substrate After Coating Contact Angle...
-
We can make the world better
Contact Angle (Water)
Abrasion test with Eraser
Friction Coefficient(friction material : paper(A4))
Tempered Glass
Metal
Plastic
Salt Water Boiling Test
Abrasion test with Steel Wool
* Substrate: Tempered Glass* It depends on the test equipments specification
E-Beam
Adhesion Strengthening
Metal
Plastic
Tempered Glass
Shock Resistance
RA, SA SHA
E-Beam or Thermal
CSC AWF
E-Beam or Thermal
TC TAF TEC TSC WAF
Thermal Thermal Sputter Wet Coating
Top CleanSafeTM
Nano PrimerTM
Excellent Adhesion Function Tape for Super Hydrophobic Lens Cutting
Non Slip TapeOptical
www.ceko.co.kr
Top CleanSafeTM
Nano PrimerTM
OpticalNon slip Tape Challenging the worlds the best CEKO
We can make the world better
>115
20,000 Cycles(>100)
0.03(0.005)
Tempered Glass
Metal
Plastic
* Normal spec
100100)
0.035 (0.005)
Tempered Glass
* High spec * Normal spec
>110
2,000 Cycles(>100)
0.035 (0.005)
Tempered Glass
>115
5,000 Cycles(>100)
0.035 (0.005)
Tempered Glass
>112
5,000 Cycles(>100)
0.04(0.005)
Tempered Glass
Plastic
-
Appearance TransparentContact Angle(Water) > 110 Static contact angleSurface Energy < 18 mN/mAnti-Smudge (Excellent)Easy Clean with Fingerprints (Excellent)Oil Repellent(Oil Magic Pen) (Excellent) For oil magic penSlipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesChemical Resistance (Excellent) Alcohol, etc.Application Large-Scale, Flexible Display, etc.
Challenging the worlds the best CEKO
Top CleanSafeTM (WAF)
www.ceko.co.kr
Product Information
We can make the world better
Performance
8 16 24 32 40 48
0.896
0.768
0.64
0.512
0.384
0.256
0.128
0
Non Coating
Wet Coating
mm
Newton/cm
Friction Material Non Coating Wet Coating
Paper (A4) 0.25 0.04
Surface Smoothness Enhancement
Form Solution Size 500g, 1kg, 4kg etc. Customized available Storage < 2 months Keeping 2010, under 65%RH, Darkness Method Wet coating process
Low Surface EnergyLow Coefficient FrictionHigh Scratch ResistanceHigh Anti-Smudge
High Contact Angle of WaterEasy-to-Clean PerformanceHigh Anti-Fingerprint
High Anti-CorrosionHigh SlipperinessSuper Water/Oil Repellent
Top CleanSafeTM
(WAF)
Performance Specification
Features
Contact Angle of Water()
Typical Specification
Spray coaterInkjet coater Dipping Coater
Bar coaterSpin coater
Applicable Equipment
* It depends on the test equipments specification
* Surface Smoothness Graph
* Dynamic Coefficient Data
* Keep the product in a freezer for long-term storage(110)
5,000 Cycles
(>100)
72h (>110)
72h (>110)
-
www.ceko.co.kr
Product Information
PerformanceChallenging the worlds the best CEKO
Top CleanSafeTM (CSC/AWF)
Product Information
Top CleanSafeTM (CSC/AWF)
Performance
We can make the world better
Salt Water Boiling Test
Contact Angle of Water()
SubstrateBefore Salt Water Boiling Test After Salt Water Boiling TestNon Coating Coating 5 cycles 10 cycles 15 cycles 20 cycles 25 cycles
AWF 97 113 112 113 110 111 111CSC 96 115 113 113 111 112 112
* Sample : Lens+Hard coating+AR+AWF, CSC (Anti-Corrosion)* It depends on the test equipments specification
Test Method - The substrate is boiled in 5% NaCl solution of 400ml for 2 min and has to rest for 1 min in distilled water at room temperature(1 cycle)
Appearance TransparentThickness > 100Contact Angle(Water) > 100 Static contact angleAnti-Smudge (Good)Easy Clean with Fingerprints (Excellent)Slipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesChemical Resistance (Excellent) Alcohol, Acetone, etc.Application Glass, Plastic, Metal, etc.
Performance Specification FeaturesLow Surface Energy Water RepellentLow Coefficient FrictionGood Contact Angle of WaterOptical Related ProductsScratch ResistanceEasy-to-Clean PerformanceAnti-CorrosionHigh Anti-SmudgeGood SlipperinessHigh Anti-Fingerprint
CSC (Cushy Clean Coat) : High Spec Hydrophobic AWF (Anti Water Film) : Normal Spec Hydrophobic
Surface Smoothness Enhancement
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4)) Measured by Friction Test Equipment(Lab Think(China))
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4)) Measured by Friction Test Equipment(Lab Think(China))
8 16 24 32 40 48 56 64 72 80
1.281.1521.0240.8960.768
0.640.5120.3840.2560.128
0
Non Coating
Coating
mm
Newton/cm
Friction Material Non Coating Coating
Paper (A4) 0.179 0.068
Friction Material Non Coating Coating
Paper (A4) 0.166 0.085
8 16 24 32 40 48 56 64 72 80
1.281.1521.0240.8960.768
0.640.5120.3840.2560.128
0
Non Coating
Coating
mm
Newton/cm
Form Tablet (Ceramic) Size CSC:9x4t, 18x6t, 18x7t
AWF: 6x3.5t, 9x4t, 13x5t, 18x6t, 18x7t Storage
-
www.ceko.co.kr
Product Information
Performance
Substrate After Coating
Contact Angle of Water(tilting) Contact Angle of Water after Test
Tilting Table Angle()
Advancing Angle of water()
Receding Angle of water()
Abrasion test with
Eraser
Abrasion test with
Steel wool
Salt Water Spray Test
High Temperature& Humidity Test
Tempered Glass 118 4 122 115
7,000 Cycles
(>100)
10,000 Cycles
(>100)
72h (>110)
72h (>110)
Appearance TransparentThickness > 200 Depending on evaporation systemContact Angle(Water) > 115 Static contact angleSurface Energy < 16 mN/mAnti-Smudge (Excellent)Easy Clean with Fingerprints (Excellent)Oil Repellent(Oil Magic Pen) (Excellent) For oil magic penSlipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesChemical Resistance (Excellent) Alcohol, Cosmetic, etc.Application Glass, Plastic, Metal, etc.
Vacuum 200
Coating Time 50~180 sec Depending on evaporation system
Product Information
We can make the world better
Performance
8 16 24 32 40 48 56 64 72 80
1.281.1521.0240.8960.768
0.640.5120.3840.2560.128
0
Non Coating
Coatingmm
Newton/cm
Friction Material Non Coating Coating
Paper (A4) 0.241 0.035
Surface Smoothness Enhancement
Performance Specification
Typical Specification
Operating Method
Form Tablet (can type) Size 12, 16, 18 Storage < 3 months(for sealing) Keeping 2010, under 65%RH Method Resistance Heat
Contact Angle of Water()
Top CleanSafeTM (TAF)
Low Surface EnergyLow Coefficient FrictionHigh Scratch ResistanceHigh Anti-Smudge
High Anti-Corrosion High Anti-FingerprintHigh Slipperiness
Super Water/Oil RepellentHigh Contact Angle of WaterEasy-to-Clean Performance
Features
* Specialized production of Abrasion test with Steel wool (High Spec)* It depends on the test equipments specification
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4))
Measured by Friction Test Equipment(Lab Think(China))
Challenging the worlds the best CEKO
Top CleanSafeTM (TAF)
* The detail method is refer to the manual offered by CEKO
* Surface Smoothness Graph
* Dynamic Coefficient Data
-
www.ceko.co.kr
Product Information
Performance
Appearance TransparentThickness > 100Contact Angle(Water) > 115 Static contact angleSurface Energy < 16 mN/mAnti-Smudge (Excellent)Easy Clean with Fingerprints (Excellent)Oil Repellent(Oil Magic Pen) (Excellent) For oil magic penSlipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesChemical Resistance (Excellent) Alcohol, Acetone, etc.Application Glass, Plastic
Product Information
We can make the world better
Performance
8 16 24 32 40 48 56 64 72 80
0.640.5760.5120.4480.384
0.320.2960.1920.1280.064
0
Non Coating
Coating
mm
Newton/cm
Friction Material Non Coating Coating
Paper (A4) 0.178 0.04
Surface Smoothness Enhancement
Performance Specification
Typical Specification
Vacuum 200
Coating Time 240~300 sec Depending on evaporation systemGas Ar, O2
Operating Method
Form Tablet (can type) Size 16 Storage < 3 months(for sealing) Keeping 2010, under 65%RH Method Resistance Heat
Contact Angle of Water()
Top CleanSafeTM (TSC)
Low Surface EnergyLow Coefficient FrictionHigh Scratch ResistanceHigh Anti-Corrosion
Easy-to-Clean PerformanceHigh Anti-SmudgeHigh Anti-Fingerprint
High SlipperinessSuper Water/Oil RepellentHigh Contact Angle of Water
Features
* Specialized production of abrasion test with steel wool* Specialized production of Thermal Sputter coating equipment* It depends on the test equipments specification
* The detail method is refer to the manual offered by CEKO
Substrate After Coating
Contact Angle of Water(tilting) Contact Angle of Water after Test
Tilting Table
Angle()
Advancing Angle of water()
Receding Angle of water()
Abrasion test with
Eraser
Abrasion test with
Steel wool
Salt Water Spray Test
High Temperature& Humidity Test
Tempered Glass 118 6 120 110
1,500Cycle
(>110)
5,000 Cycle
(>100)
72h (>110)
72h (>110)
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4))
Measured by Friction Test Equipment(Lab Think(China))
Challenging the worlds the best CEKO
Top CleanSafeTM (TSC)
* Surface Smoothness Graph
* Dynamic Coefficient Data
-
www.ceko.co.kr
Product Information
PerformanceChallenging the worlds the best CEKO
Top CleanSafeTM (TC)
Product Information
We can make the world better
Performance
Top CleanSafeTM
(TC)
Vacuum 100
Coating Time 50~180 sec Depending on evaporation systemScan Size 2.5~4.5cm The same as SiO2 deposition scan size
Typical Specification
Operating Method
Form Tablet (button type) Size 12, 16, 20, 24, 28 Storage 100Contact Angle(Water) > 115 Static contact angleSurface Energy < 16 mN/mAnti-Smudge (Excellent)Easy Clean with Fingerprints (Excellent)Oil Repellent(Oil Magic Pen) (Excellent) For oil magic penSlipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesThermal Resistance > 110 For 15 days at 100C dry ovenChemical Resistance (Excellent) Alcohol, Acetone, etc.Application Glass, Plastic, Metal, etc.
Low Surface EnergyLow Coefficient FrictionHigh Scratch ResistanceHigh Anti-Corrosion
Easy-to-Clean PerformanceHigh Anti-SmudgeHigh Anti-Fingerprint
High SlipperinessSuper Water/Oil RepellentHigh Contact Angle of Water
Features
Substrate After Coating
Contact Angle of Water(tilting) Contact Angle of Water after Test
Tilting Table Angle()
Advancing Angle of water()
Receding Angle of water()
Abrasion test with
Eraser
Abrasion test with
Steel wool
Salt Water Spray Test
High Temperature& Humidity Test
Tempered Glass 118 4 123 114
20,000 Cycles
(>100)
500 Cycles
(>100)
156h (>110)
144h (>110)
4 8 12 16 20 24 28 32 36 40
0.160.1140.1280.1120.096
0.080.0640.0480.0320.016
0
Non Coating
Coating
mm
Newton/cm
Friction Material Non Coating Coating
Paper (A4) 0.231 0.03
Surface Smoothness Enhancement
Contact Angle of Water()
* Specialized production of Abrasion test with Eraser* It depends on the test equipments specification
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4))
Measured by Friction Test Equipment(Lab Think(China))
* The detail method is refer to the manual offered by CEKO
* Substrate : Tempered Glass* It depends on the substrate, coating method.
* Surface Smoothness Graph
* Dynamic Coefficient Data
-
www.ceko.co.kr
Product Information
Performance
Product Information
We can make the world better
Performance
Top CleanSafeTM
(TEC)
Typical Specification
Vacuum 200
Coating Time 50~180 sec Depending on evaporation system
Operating Method
Form Tablet (button type) Size 12, 16, 18 Storage < 3 months(for sealing) Keeping 2010, under 65%RH Method Resistance Heat
Performance SpecificationAppearance TransparentThickness > 200 Depending on evaporation systemContact Angle(Water) > 115 Static contact angleSurface Energy < 16 mN/mAnti-Smudge (Excellent)Easy Clean with Fingerprints (Excellent)Oil Repellent(Oil Magic Pen) (Excellent) For oil magic penSlipperiness (Excellent)Adhesion (Excellent) Tape test, 3 timesChemical Resistance (Excellent) Alcohol, Cosmetic, etc.Application Glass, Plastic, Metal, etc.
Features
Substrate After Coating
Contact Angle of Water(tilting) Contact Angle of Water after Test
Tilting Table Angle()
Advancing Angle of water()
Receding Angle of water()
Abrasion test with
Eraser
Abrasion test with
Steel wool
Salt Water Spray Test
High Temperature& Humidity Test
Tempered Glass 117 5 122 111
3,000 Cycles
(>100)
2,000 Cycles
(>100)
72h (>110)
72h (>110)
Non Coating
Coating
mm
Newton/cm
Friction Material Non Coating Coating
Paper (A4) 0.209 0.04
Surface Smoothness Enhancement
Contact Angle of Water()
* Specialized production of Abrasion test with Steel wool (Normal Spec)* It depends on the test equipments specification
8 16 24 32 40 48 56 64 72 80
0.640.5760.5120.4480.384
0.320.2960.1920.1280.064
0
Low Surface EnergyLow Coefficient FrictionHigh Scratch ResistanceHigh Anti-Corrosion
Easy-to-Clean PerformanceHigh Anti-SmudgeHigh Anti-Fingerprint
High SlipperinessSuper Water/Oil RepellentHigh Contact Angle of Water
Compared with Non coating & Coating Dynamic Coefficient (Friction Material : Paper(A4))
Measured by Friction Test Equipment(Lab Think(China))
Challenging the worlds the best CEKO
Top CleanSafeTM (TEC)
* The detail method is refer to the manual offered by CEKO
* Surface Smoothness Graph
* Dynamic Coefficient Data
-
www.ceko.co.kr
Product Information
Performance Challenging the worlds the best CEKO
Nano PrimerTM
Measure Method Contact angle meter(KRSS)
Product Information
We can make the world better
Performance
Nano PrimerTM
Vacuum 100
Coating Time 50~180 sec Depending on evaporation systemScan Size 2.5~4.5 cm The same as SIO2 deposition scan size
Typical Specification
Operating Method
Form Tablet (button type) Size 12, 16, 20, 24, 28 Storage 100Contact Angle(Water) < 35 Static contact angleSurface Energy High (> 45mN/m)Adhesion Strengthening (Excellent)Surface Hardness Strengthening (Excellent)Chemical Resistance (Excellent) Alcohol, Acetone, etc.Application Glass, Plastic, Metal, etc.
High Surface EnergyHigh Coefficient FrictionSurface Hardness Strengthening
Low Contact Angle of WaterHigh Anti-Corrosion
High Shock ResistanceHigh Adhesion Strengthening
Features
Adhesion Strengthening (RA, SA Series)
Salt Water Boiling Test
* Weight: 500g* Substrate: PMMA* It depends on the test equipments specification
TestInitial Contact Angle of Water
Abrasion Test with Eraser1,000 Cycles
2,000 Cycles
5,000 Cycles
NP+TC 119 115 113 110 TC 119 71 - -
Picture
Microscope (x70)
Coating Non Coating
High Surface Energy(mN/m)Surface Energy of Nano Primer Coating(mN/m)
SampleNano Primer Coating Non
Coating1 point 2 point 3 point Ave.PC 45 46 46 46 35
PMMA 47 46 47 47 34SUS 47 46 47 47 36
Tempered Glass 47 47 48 47 38
High Temperature & Humidity Resistance Test The Unique characteristics of Nano PrimerTM exhibit a significantly increased stability of the coated moisture conditions. * Substrate: PMMA
* Non coating : TC * Coating Layer : NP+TC (NP : Nano Primer, TC : Top CleanSafeTM)
* The detail method is refer to the manual offered by CEKO
-
www.ceko.co.kr
Product Information
Challenging the worlds the best CEKO
Non slip Tape
Benefits
We can make the world better
Non Slip Tape
Product Information
Superior slip resistance when used in conjunction with blocking padExcellent adhesion
Start with a stable blocking surface
Prior to blocking. the lens should always be cleaned. This will ensure adhesion to a stable surface.
Correct placement
The Non-Slip tape should be firmly placed on the center of the lens.
Choosing the right blocking system components for the
Non-Slip tape
Blocking pads need to suit Non-Slip tape. The block radius and lens should be closely matched for optimum adhesion and wet-out. Block should be completely clean and dry prior to the edging process.
Typical Specification Contents 1sheet consist of 2 pieces Usage Super-HydrophobicLensCutting Characteristic of Function High Surface Energy Product Type Non-Slip tape Size 28mm x 40mm