WE ARE AUDIOTEC FISCHER - Everpol
32
Transcript of WE ARE AUDIOTEC FISCHER - Everpol
WE ARE AUDIOTEC FISCHER
Since its foundation in 1990 Audiotec Fischer has developed from a niche supplier to one of the most recog-nized car audio manufacturers worldwide.
Intro
With its innovative products Audiotec Fischer has not only become a technological leader for the aftermarket but as well a valued supplier for many car makers. All our products are designed and manufac-tured according to the highest standards of the automobile industry.
For that reason Audiotec Fischer has been certified according to DIN EN ISO 9001:2008 and DIN EN ISO 14001:2009 in order to as-sure outstanding quality and reliability.
Audiotec Fischer stands for "Made in Germany" like no other car audio manufacturer. Every single prod-uct is developed in-house from the very first idea till its minutest detail - one of our key factors for cutting-
edge technology and unparalleled flexibility. Besides that we predominantly rely on local suppliers to warrant an unsurpassed supply chain.
DIN EN ISO 9001:2008 certified since 2005
DIN EN ISO 14001:2009 certified since 2014
www.audiotec-fischer.com
Our exceptional 100% quality control is another basic principle for our success and reflects the philosophy of the company. It is not surprising that Audiotec Fischer has received numerous awards from the international press and frenetic feedback from our worldwide custom-ers over the years.
Amplifiers .........................................4G FIVE / G FOUR / G TWO / G ONE ...............................................................................4
V EIGHT DSP ...................................................................................................................5
P SIX DSP MK2 ..............................................................................................................6
H 400X .........................................................................................................7
A4 / A2 .........................................................................................................8
SPXL 1000 ....................................................................................................9
Loudspeakers ...............................10B 62C.2 / B 52C.2 / B 6X.2 / B 5X.2 / B 4X.2 / B 69X.2 ................................ 10
E 62C.2 / E 52C.2 / E 42C.2 / E 6X.2 / E 5X.2 / E 4X.2 ................................ 12
P 62C / P 52C / P 1T / P 5B / P 6B............................................................... 14
C 63C / C 62C / C 1T / C 2M / C 6B ............................................................. 16
Subwoofers ...................................18SINGLE SUBWOOFERS
B 12W / B 10W ...............................................................................................................18
E 12W / E 10W / E 8W ...................................................................................................19
P 12W / P 10W / P 8W ...................................................................................................20
SPXL 12 ..................................................................................................... 21
ENCLOSURE SUBWOOFERS
B 12E / B 10E ............................................................................................. 22
P 12E / P 10E / P 8E ................................................................................... 23
Processors .................................... 24DSP ............................................................................................................ 24
DSP PRO .................................................................................................... 25
Accessories .................................. 26 REMOTE CONTROLS ................................................................................. 26
EXTENSION CARDS ................................................................................... 27
AAC.2 / CAPS / CABLES ............................................................................. 28
DSP PC-Tool .................................. 29
Technology ................................... 30
Amplifiers
4
G FIVE G FOUR G TWO G ONEOutput power RMS / max.- @ 4 Ohms 4 x 80 / 160 + 1 x 360 / 720 Watts 4 x 80 / 160 Watts 2 x 125 / 250 Watts 1 x 390 / 780 Watts- @ 2 Ohms 4 x 120 / 240 + 1 x 600 / 1,200 Watts 4 x 120 / 240 Watts 2 x 200 / 400 Watts 1 x 675 / 1,350 Watts- @ 1 Ohm - - 2 x 300 / 600 Watts 1 x 920 / 1,840 Watts- bridged @ 4 Ohms 2 x 240 / 480 + 1 x 360 / 720 Watts 2 x 240 / 480 Watts 1 x 400 / 800 Watts -- bridged @ 2 Ohms - - 1 x 600 / 1,200 Watts -Frequency response 10 - 40,000 Hz 10 - 40,000 Hz 10 - 40,000 Hz 10 - 250 HzBass boost 0 - 12 dB / 45 Hz 0 - 12 dB / 45 Hz 0 - 12 dB / 45 Hz 0 - 12 dB / 25 - 50 HzHighpass 15 - 4,000 Hz adjustable 15 - 4,000 Hz adjustable 15 - 4,000 Hz adjustable -Lowpass 40 - 4,000 Hz adjustable 40 - 4,000 Hz adjustable 40 - 4,000 Hz adjustable 50 - 250 Hz adjustableBandpass 15 - 4,000 Hz adjustable 15 - 4,000 Hz adjustable 15 - 4,000 Hz adjustable 10 - 250 Hz adjustableSubsonic 15 - 50 Hz adjustable - - 10 - 50 Hz adjustableDistortion (THD) 0.02 % 0.02 % 0.02 % 0.05 %Signal-to-noise ratio 105 dB (A-weighted) 108 dB (A-weighted) 106 dB (A-weighted) 95 dB (A-weighted)Input sensitivity 2.5 - 14 Volts (Highlevel),
1 - 6 Volts (RCA / Cinch)2.5 - 14 Volts (Highlevel),1 - 6 Volts (RCA / Cinch)
2.5 - 14 Volts (Highlevel),1 - 6 Volts (RCA / Cinch)
2.5 - 14 Volts (Highlevel),1 - 6 Volts (RCA / Cinch)
Dimensions (H x W x D) 57 x 445 x 241 mm / 2.24 x 17.52 x 9.50”
57 x 334 x 241 mm / 2.24 x 13.15 x 9.50”
57 x 334 x 241 mm / 2.24 x 13.15 x 9.50”
57 x 334 x 241 mm / 2.24 x 13.15 x 9.50”
Features:
• Start-Stop capability down to 6V supply voltage• Smart highlevel input with ADEP circuit (Advanced Diagnostics Error
Protection)• Fully active crossover with highpass, lowpass, bandpass and bass boost• Extremely stable output stage with high-current power transistors - 1 Ohm
stability (G TWO / G ONE)• Cable remote control for volume adjustment included in delivery• "Input mode" switch for flexible input signal routing• Highlevel input sensitivity up to 14 Volts max.• SMD (Surface Mounted Device) manufacturing technology combines
minimum space requirement with maximum reliability• Exclusive compact and clean design with illuminated HELIX-logo
G TWO2-channel Class AB amplifier with 1 Ohm stability
G ONE1-channel Class D amplifier with 1 Ohm stability
G FIVE 5-channel Class AB / Class D amplifier
G FOUR4-channel Class AB amplifier
5
Amplifiers
V EIGHT DSP8-channel Pure Class GD amplifier with integrated 10-channel DSP
Features:
• New "Pure Class GD" concept for outstanding sound quality combined with best possible efficiency
• Cutting-edge, extremely powerful "fixed point" Audio DSP with 64 Bit resolution and 1.2 billion MAC operations per second
• Eight speaker outputs with up to 120 Watts RMS into 2 Ohms• Two processed RCA outputs• Inputs: 6 x RCA, 6 x Highlevel with up to 20V RMS input sensitivity, optical
SPDIF input• Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection)• HELIX Extension Card slot (HEC) for additional input / output modules like
Bluetooth® Audio Streaming• Automatic Remote switch• Compact design with low heat dissipation thanks to extraordinary efficiency
DSP solution 64 BitDSP power 295 MHz (1.2 billion MAC operations/second)Sampling rate 48 kHzSignal converters A/D: BurrBrown
D/A: BurrBrownSignal-to-noise ratio digital input 105 dB (A-weighted)Signal-to-noise ratio analog input 100 dB (A-weighted)Distortion (THD) < 0.015 %Damping factor > 70Input impedance RCA / Cinch 10 kOhmsInput impedance highlevel 13 Ohms or 13 kOhmsOperating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)Additional features Control Input, USB, HEC slotDimensions (H x W x D) 44 x 220 x 180 mm / 1.73 x 8.66 x 7.09"
V EIGHT DSPOutput power RMS- @ 4 Ohms 75 Watts per channel (≤ 1% THD+N)- @ 2 Ohms 120 Watts per channel (≤ 1% THD+N)Inputs 6 x RCA / Cinch
6 Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote In
Input sensitivity RCA / Cinch 2 - 4 Volts or 4 - 8 VoltsHighlevel 5 - 10 Volts or 10 - 20 Volts
Outputs 8 x Speaker2 x RCA / Cinch2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMSFrequency response 20 - 22,000 Hz
Amplifiers
6
DSP solution 64 BitDSP power 295 MHz (1.2 billion MAC operations/second)Sampling rate 96 kHzSignal converters A/D: BurrBrown
D/A: BurrBrownSignal-to-noise ratio digital input 105 dB (A-weighted)Signal-to-noise ratio analog input 100 dB (A-weighted)Distortion (THD) < 0.008 %Damping factor > 100Input impedance RCA / Cinch 64 kOhmsInput impedance highlevel 13 Ohms or 64 kOhmsOperating voltage 10.5 - 32 Volts (max. 5 sec. down to 6 Volts)Additional features Control Input, USB, HEC slotDimensions (H x W x D) 50 x 250 x 190 mm / 1.97 x 9.84 x 7.48"
P SIX DSP MK2Output power RMS- Channel A - F @ 4 Ohms 120 Watts per channel (≤ 1% THD+N)- Channel C - F @ 2 Ohms 230 Watts per channel (≤ 1% THD+N)Inputs 6 x RCA / Cinch
6 Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote In
Input sensitivity RCA / Cinch 2 - 4 Volts or 4 - 8 VoltsHighlevel 5 - 10 Volts or 10 - 20 Volts
Outputs 6 x Speaker2 x RCA / Cinch2 x Remote Out
Output voltage RCA / Cinch 3 Volts RMSFrequency response 20 - 44,000 Hz
P SIX DSP MK26-channel Ultra HD Class D amplifier with integrated high-end 8-channel DSP
Features:
• New "Ultra HD Class D" concept which combines the high-end sound quality of Class AB technology with the benefits of Class D amplifiers
• Full audio bandwidth up to more than 40 kHz thanks to 96 kHz sampling rate• Cutting-edge, extremely powerful "fixed point" Audio DSP with 64 Bit
resolution and 1.2 billion MAC operations per second• Six speaker outputs with up to 230 Watts RMS into 2 Ohms• Two processed RCA outputs• Inputs: 6 x RCA, 6 x Highlevel with up to 20V RMS input sensitivity, optical
SPDIF input• HELIX Extension Card slot (HEC) for additional input / output modules like
Bluetooth® Audio Streaming• 24 Volts compatible without making any changes to the unit• Compact design with low heat dissipation thanks to extraordinary efficiency
7
H 400XOutput power RMS / max.- @ 4 Ohms 4 x 70 / 140 Watts- @ 2 Ohms 4 x 125 / 250 Watts- bridged @ 4 Ohms 2 x 250 / 500 WattsFrequency response 20 - 20,000 HzHighpass 15 - 4,000 Hz adjustableLowpass 15 - 4,000 Hz adjustableBandpass 15 - 4,000 Hz adjustableDistortion (THD) < 0.009 %Signal-to-noise ratio > 100 dBDamping factor > 300Inputs sensitivity 0.7 - 8 VoltDimensions (H x W x D) 31.5 x 200 x 336 mm / 1.24 x 7.87 x 13.23"
Classic AmplifiersClassic Line
H 400X4-channel Class AB amplifier with integrated active crossover
Features:
• Extremely stable amplifiers in an extraordinary shallow heatsink• Unique Bipolar output transistor technology for unparalleled natural and warm
sound experience• Fastest drivers for lowest possible THD• Processor-controlled technology for optimized operation• Fully active crossover with highpass, lowpass and bandpass filter• "Input mode" switch for flexible input signal routing• RMI (Realmixed Input) for generating an optimised mono-summing signal from
the left and right channels• Smart protection circuits against overheating, over- and undervoltage,
speaker short circuiting, low impedance and faulty connection• 24 carat gold-plated solid connection terminals suitable for 25 mm² / gauge 4• Completely made in Germany by using only selected components
Still successfulThe first HELIX amplifier which was launched in 2001 still remains successful. With its extremely fast MOSFET driver circuits in Class A operation combined with enormously load-stable, power-potent "afterburners" in bipolar technol-ogy it combines the best of both worlds. Improved again and again over the years, this powerhouse with its natu-ral sound characteristic, transparent plexi cover and extraordinary shallow heatsink has reached a sound level that is unrivalled.
Amplifiers
8
A4 A2Output power RMS / max.- @ 4 Ohms 4 x 85 / 150 Watts 2 x 150 / 250 Watts- @ 2 Ohms 4 x 150 / 250 Watts 2 x 270 / 450 Watts- @ 1 Ohm - 2 x 395 / 650 Watts- bridged @ 4 Ohms 2 x 270 / 450 Watts 1 x 540 / 900 Watts- bridged @ 2 Ohms 2 x 395 / 650 Watts 1 x 790 / 1,300 WattsFrequency response 15 - 20,000 Hz 15 - 20,000 HzBass boost 0 - 9 dB / 30 -120 Hz 0 - 9 dB / 30 - 120 HzHighpass 15 - 7,000 Hz adjustable 15 - 6,000 Hz adjustableLowpass 15 - 7,000 Hz adjustable 15 - 6,000 Hz adjustableBandpass 15 - 7,000 Hz adjustable 15 - 6,000 Hz adjustableDistortion (THD) < 0.009 % < 0.009 %Signal-to-noise ratio > 100 dB > 100 dBDamping factor > 450 > 1,000Input sensitivity 500 mV - 8 Volts 500 mV - 8 VoltsDimensions (H x W x D) 35 x 432 x 240 mm / 1.38 x 17.0 x 9.45" 35 x 432 x 240 mm / 1.38 x 17.0 x 9.45"
Features:
• Extremely stable output stage with selected MOSFET transistors• Drivers in Class A Technology for lowest possible THD• Processor-controlled technology for optimized operation• Smart protection circuits against overheating, over- and undervoltage,
speaker short circuiting, low impedance and faulty connection• 1 % accurate components for perfect sound quality• 24 carat gold-plated solid connection terminals suitable for 25 mm² / gauge 4• Temperature-optimised heatsink for efficient heat dissipation
A22-channel high-end Class AB amplifier with integrated active crossover
A44-channel high-end Class AB amplifier with integrated active crossover
9
SPXL 1000Output power RMS / max.- @ 4 Ohms 1 x 750 / 1,275 Watts- @ 2 Ohms 1 x 1,200 / 2,040 Watts- @ 1 Ohm 1 x 1,600 / 2,720 WattsPhase shift 0 - 180°Frequency response 10 - 250 HzBass boost 0 - 18 dB / 40 - 120 HzSetting range Lowpass 35 - 250 HzInput impedance 50 kOhmsDistortion (THD) < 0.33 %Signal-to-noise ratio > 96 dBInput sensitivity 200 mV - 6 VoltsDimensions (H x W x D) 55 x 430 x 277 mm / 2.17 x 16.93 x 10.9" Remote control included in delivery
Amplifiers
SPXL 10001-channel high-end Class D amplifier with 1 Ohm stability
Features:
• Subwoofer amplifier in Class D technology• Huge output power for a high control at absolute levels• Extremely stable output stage with selected MOSFET transistors • 1-Ohm stable• Integrated, active crossover with lowpass, subsonic and bass boost• Master- / Slave-Mode for connecting two amplifiers in bridged mode• Cable remote control• RMI (Realmixed Input) for generating an optimized mono-summing signal from
the left and right channels• Line-Out for connecting another amplifier• Smart protection circuits against overheating, over- and undervoltage,
speaker short circuiting, low impedance and faulty connection• 24 carat gold-plated solid connection terminals for lossless signal and power
transmission
Also available in silver
Loudspeakers
10
B 62C.2 B 52C.2Power handling RMS / max. 60 / 180 Watts 50 / 150 WattsFrequency response 55 Hz - 22,000 Hz 65 Hz - 22,000 HzSensitivity 91 dB 1W / 1m 90 dB 1W / 1mImpedance 4 Ohms 4 OhmsInstallation depth W / T 61 mm / 17.5 mm; 2.40" / 0.70" 52 mm / 17.5 mm; 2.05" / 0.70"
Features
• Woofer with low resonant cones made from injected polypropylene with unique HELIX logos• 1 inch / 25 mm silk dome tweeter with neodymium magnet for crispy and clear treble response• Individual HELIX design basket with additional ventilation holes for better voice coil cooling and high power handling• Solid rubber magnet protection ring with HELIX logo• Separate crossover with 6/12 dB slope and tweeter protection• Grille included
B 62C.22-way component system 6.5 inch / 165 mm 60 / 180 Watts91 dB 1W / 1m
B 52C.22-way component system 5.25 inch / 130 mm 50 / 150 Watts90 dB 1W / 1m
11
B 6X.2 B 5X.2 B 4X.2 B 69X.2Power handling RMS / max. 50 / 150 Watts 40 / 120 Watts 30 / 90 Watts 60 / 180 WattsFrequency response 60 Hz - 22,000 Hz 70 Hz - 22,000 Hz 100 Hz - 22,000 Hz 35 Hz - 22,000 HzSensitivity 91 dB 1W / 1m 90 dB 1W / 1m 89 dB 1W / 1m 91 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 Ohms 4 OhmsInstallation depth 58 mm; 2.29" 50 mm; 1.97" 45.5 mm; 1.79" 81 mm; 3.2"
Features
• Woofer with low resonant cones made from injected polypropylene with unique HELIX logos
• 2 inch / 50 mm mylar midrange (B 69X.2)• 0.5 inch / 13 mm mylar tweeter with neodymium
magnet for crispy and clear treble response• Individual HELIX design basket with additional
ventilation holes for better voice coil cooling and high power handling
• Solid rubber magnet protection ring with HELIX logo• Integrated crossover with 6 dB slope• Grille included
B 5X.22-way coaxial system 5.25" / 130 mm 40 / 120 Watts90 dB 1W / 1m
B 4X.22-way coaxial system4" / 100 mm30 / 90 Watts89 dB 1W / 1m
B 69X.23-way coaxial system6 x 9 inch / 160 x 230 mm 60 / 180 Watts91 dB 1W / 1m
B 6X.22-way coaxial system6.5" / 165 mm 50 / 150 Watts91 dB 1W / 1m
Loudspeakers
Loudspeakers
12
E 62C.2 E 52C.2 E 42C.2Power handling RMS / max. 75 / 220 Watts 60 / 180 Watts 50 / 150 WattsFrequency response 50 Hz - 25,000 Hz 60 Hz - 25,000 Hz 75 Hz - 25,000 HzSensitivity 91 dB 1W / 1m 90 dB 1W / 1m 89 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsInstallation depth W / T 65 mm / 17.5 mm; 2.56" / 0.70" 54 mm / 17.5 mm; 2.05" / 0.70" 48 mm / 17.5 mm;1.89" / 0.70"
E 62C.22-way component system6.5 inch / 165 mm woofer 75 / 220 Watts91 dB 1W / 1m
Features
• Woofer with very stiff and non-resonating cone made from woven fiberglass
• Specially shaped butyl surround for larger effective cone area and increased maximum excursion
• 1 inch / 25 mm silk dome tweeter with neodymium magnet for brilliant and smooth treble response
• Tweeters are 25° tiltable for perfect alignment at listening position
• Individual HELIX design basket with additional ventilation holes for better voice coil cooling and high power handling
• Complex, separate crossover with 6/12 dB slope, bandstop filter, tweeter protection and adjustable tweeter level
• Grille included
E 52C.22-way component system5.25 inch / 130 mm60 / 180 Watts90 dB 1W / 1m
E 42C.22-way component system4 inch / 100 mm50 / 150 Watts89 dB 1W / 1m
13
E 6X.2 E 5X.2 E 4X.2Power handling RMS / max. 60 / 180 Watts 50 / 150 Watts 40 / 120 WattsFrequency response 55 Hz - 22,000 Hz 65 Hz - 22,000 Hz 80 Hz - 22,000 HzSensitivity 91 dB 1W / 1m 90 dB 1W / 1m 89 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsInstallation depth 65 mm; 2.56" 54 mm; 2.13" 48 mm; 1.89"
Features
• Woofer with very stiff and non-resonating cone made from woven fiberglass
• Specially shaped butyl surround for larger effective cone area and increased maximum excursion
• 0.75 inch / 19 mm silk dome tweeter with neodymium magnet for brilliant and smooth treble response
• Tweeters are 360° pivotable and 25° tiltable for perfect alignment with listening position (except E 4X.2)
• Individual HELIX design basket with additional ventilation holes for better voice coil cooling and high power handling
• Separate inline crossover with integrated tweeter protection (coaxial systems)
• Grille included
E 4X.22-way coaxial system4 inch / 100 mm 40 / 120 Watts89 dB 1W / 1m
Loudspeakers
E 6X.22-way coaxial system6.5 inch / 165 mm60 / 180 Watts91 dB 1W / 1m
E 5X.22-way coaxial system5.25 inch / 130 mm50 / 150 Watts90 dB 1W / 1m
14
P 62C P 52CPower handling RMS / max. 100 / 200 Watts 80 / 160 WattsFrequency response 40 Hz - 25,000 Hz 60 Hz - 25,000 HzSensitivity 90 dB 1W / 1m 89 dB 1W / 1mImpedance 4 Ohms 4 OhmsInstallation depth W / T 67 mm / 15 mm; 2.65" / 0.6" 62.5 mm / 15 mm; 2.46" / 0.6"
Loudspeakers
Features
• Mid-woofer with novel glassfiber-paper compound cone for maximum stiffness combined with lowest moving mass and perfect inner damping
• 1" / 25 mm tweeter with hand-coated silk dome for balanced, natural sound reproduction and lowest compression effects• Lowest possible production tolerances and solely use of best materials• Euro-DIN sized baskets for easy and hassle-free installation in nearly all type of cars• Complex crossover network with impedance compensation, bandstop filter and tweeter level adjustment• Gold-plated terminals• Grille included
P 62C2-way component system165 mm / 6.5"100 / 200 Watts90 dB 1W / 1m
P 52C2-way component system 130 mm / 5.25"80 / 160 Watts89 dB 1W / 1m
P 6BMid-woofer 6.5" / 165 mm100 / 200 Watts90 dB 1W / 1m
15
P 1T P 5B P 6BPower handling RMS / max. - 80 / 160 Watts 100 / 200 WattsFrequency response 2,500 Hz - 25,000 Hz 60 Hz - 5,500 Hz 40 Hz - 4,000 HzSensitivity 91 dB 1W / 1m 89 dB 1W / 1m 90 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsInstallation depth 15 mm / 0.6" 62.5 mm / 2.46" 67 mm / 2.64"
Features P 1T
• Tweeter with high efficient neodymium magnet and hand-coated silk dome for balanced, natural sound reproduction and lowest compression effects
• Lowest possible production tolerances and solely use of best materials
• Including installation and mounting equipment
Loudspeakers
Features P 5B / P 6B
• Mid-woofer with novel glassfiber-paper compound cone for maximum stiffness combined with lowest moving mass and perfect inner damping
• Lowest possible production tolerances and solely use of best materials
• Gold-plated terminals• Grille included
P 1TSilk dome tweeter1" / 25 mm 91 dB 1W / 1m
P 5BMid-woofer5.25" / 130 mm 80 / 160 Watts90 dB 1W / 1m
16
Features
• Mid-woofer with sturdy aluminum diecast basket• Large coupling volumes for tweeter and midrange allow exceptionally low crossover frequency• Mid-woofer cone with scooped, long-fibered sisal with additional elastomer structural damping• Virtually compression-free conversion of the amplifier power into sound pressure• Lowest manufacturing tolerances and exclusive use of selected materials• Frequency crossover with tweeter level adjustment and double woofer mode• Manufactured in Germany• Grille included
C 63C C 62CPower handling RMS / max. 190 / 380 Watts 150 / 300 WattsFrequency response 47 Hz - 25,000 Hz 47 Hz - 25,000 HzSensitivity 91 dB 1W / 1m 91 dB 1W / 1mImpedance 4 Ohms 4 OhmsInstallation depth 67 mm / 2.64" 67 mm / 2.64"
Loudspeakers
C 63CHigh-end 3-way component system6.5" / 165 mm190 / 380 Watts91 dB 1W / 1m
C 62CHigh-end 2-way component system 6.5" / 165 mm150 / 300 Watts91 dB 1W / 1m
17
C 1T C 2M C 6BPower handling RMS / max. - 40 / 80 Watts 150 / 300 WattsFrequency response 820 Hz - 25,000 Hz 550 Hz - 7,000 Hz 47 Hz - 5,000 HzSensitivity 90 dB 1W / 1m 93 dB 1W / 1m 91 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsInstallation depth 21 mm; 0.83" 31 mm / 1.22" 67 mm / 2.64"
Loudspeakers
C 1THigh-end silk dome tweeter 1" / 25 mm90 dB 1W / 1m
C 2MHigh-end midrange speaker2.1" / 54 mm40 / 80 Watts93 dB 1W / 1m
C 6BHigh-end mid-woofer6.5" / 165 mm150 / 300 Watts91 dB 1W / 1m
Features C 1T
• High-end tweeter with silk dome• 12x drilled neodymium magnet
and damped coupling volume for very low resonance frequency
• Lowest possible tolerances and solely use of finest selected materials
• Including installation and mounting equipment
Features C 6B
• Mid-woofer with sturdy aluminum diecast basket
• Mid-woofer cone with scooped, long-fibered sisal with additional elastomer structural damping
• Virtually compression-free conversion of the amplifier power into sound pressure
• Lowest manufacturing tolerances and exclusive use of selected materials
• Grille included
Features C 2M
• High-end midrange speaker with silk dome
• 10x drilled neodymium magnet and damped coupling volume for very low resonance frequency
• Lowest possible tolerances and solely use of finest selected materials
• Including installation and mounting equipment
Single Subwoofers
18
B 12W B 10WPower handling RMS / max. 300 / 600 Watts 250 / 500 WattsSensitivity 90 dB 1W / 1m 87 dB 1W / 1mImpedance 2 x 2 Ohms 2 x 2 OhmsResonance frequency 29 Hz 33 HzQms 4.72 4.35Qes 0.58 0.50Qts 0.52 0.45VAS 90 L 41 LMax. linear excursion +/- 6 mm +/- 6 mmInstallation depth 127 mm / 5.00" 116 mm / 4.57"
Features
• Low resonant cones made from injected polypropylene• Massive and rigid aluminum diecast baskets• Massive gold-plated terminals• Solid rubber magnet protection ring with HELIX logo • 2 x 2 Ohms dual voice coil for flexible system configuration• Chrome-plated and polished pole plate with HELIX logo
B 12W12" / 300 mm300 / 600 Watts 2 x 2 Ohms90 dB 1W / 1m
B 10W10" / 250 mm 250 / 500 Watts2 x 2 Ohms87 dB 1W / 1m
E 12W E 10W E 8WPower handling RMS / max. 400 / 600 Watts 300 / 450 Watts 200 / 300 WattsSensitivity 87 dB 1W / 1m 87 dB 1W / 1m 85 dB 1W / 1mImpedance 2 x 2 Ohms 2 x 2 Ohms 2 x 2 OhmsResonance frequency 38 Hz 50 Hz 52 HzQms 5.75 6.68 5.08Qes 0.65 0.67 0.81Qts 0.59 0.61 0.70VAS 39 L 16.5 L 11.2 LMax. linear excursion +/- 5.5 mm +/- 4 mm +/- 4.5 mmInstallation depth 89.5 mm / 3.5" 80 mm / 3.15" 58 mm / 2.28"
19
Single Subwoofers
Features
• 2 x 2 Ohms dual voice coil for flexible speaker configurations
• Extremely stiff honeycomb membrane with fiberglass coating
• Massive and rigid aluminum diecast basket• Very low mounting depth for shallow subwoofer
constructions• Massive gold-plated terminals• Wide rubber surround for maximum cone
excursions• T/S parameters optimized for use in compact sealed
enclosures
E 12W12" / 300 mm 400 / 600 Watts2 x 2 Ohms87 dB 1W / 1m
E 10W10" / 250 mm300 / 450 Watts2 x 2 Ohms87 dB 1W / 1m
E 8W8" / 200 mm200 / 300 Watts2 x 2 Ohms85 dB 1W / 1m
20
P 12W P 10W P 8WPower handling RMS / max. 400 / 800 Watts 350 / 700 Watts 300 / 600 WattsSensitivity 89 dB 1W / 1m 86 dB 1W / 1m 86 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsResonance frequency 27 Hz 25 Hz 32 HzQms 3.81 3.26 3.44Qes 0.27 0.30 0.25Qts 0.25 0.28 0.23VAS 72 L 50 L 19.9 LMax. linear excursion +/- 8.5 mm +/- 6.5 mm +/- 5 mmInstallation depth 142 mm / 5.6" 130 mm / 5.1" 115.5 mm / 4.55"
Features
• Concave PP dustcap with embossed HELIX logo
• Long-excursion rubber surround with stitching for highest mechanical rating
• Extremely stiff Kevlar / paper sandwich cone
• Machined aluminum mounting ring to fix the rubber surround
• Double-vented voice coil for minimized compression effects
• Large magnet system for low Qts • Torsion-free aluminum diecast basket with
diamond cut• Oversized voice coil for maximum electrical
power handling and high linear excursion• Rugged butyl magnet cover with HELIX
lettering for perfect magnet protection• Solid push terminals
P 10W10" / 250 mm 350 / 700 Watts4 Ohms86 dB 1W / 1m
P 8W8" / 200 mm 300 / 600 Watts4 Ohms86 dB 1W / 1m
P 12W12" / 300 mm400 / 800 Watts4 Ohms89 dB 1W / 1m
Single Subwoofers
21
Features
• High-end SPL subwoofer• Concave PP dustcap with embossed HELIX logo• Long-excursion rubber surround with double stitching for highest mechanical rating• Extremely stable Kevlar / paper sandwich cone• Machined aluminum mounting ring to fix the rubber surround• Torsion-free aluminum diecast basket with diamond cut• Huge 100 mm flat wire voice coil with incredible 57.5 mm winding height on black aluminum former • Double nomex spider avoids non-linearities of the cone suspension• Rugged butyl magnet cover with HELIX lettering for perfect magnet protection• Optimized for use in vented enclosures• Massive triple magnet system 3 x 100 oz (8,505 g) with chrome-plated machined pole plates. Magnet size: Ø 220 x 75 mm
SPXL 12Power handling RMS / max. 1,500 / 3,000 WattsSensitivity 85 dB 1W / 1mImpedance 2 x 2 OhmsResonance frequency 31 HzQms 2.92Qes 0.57Qts 0.47VAS 38 LMax. linear excursion +/- 23 mmInstallation depth 209 mm / 8.23"
SPXL 1212" / 300 mm1500 / 3000 Watts2 x 2 Ohms85 dB 1W / 1m
The SPXL 12 is packed in an exclusive wooden box.
Single Subwoofers
Features
• 2 x 2 Ohms dual voice coil for flexible system configuration• Low resonant cones made from injected polypropylene• Massive and rigid aluminum diecast baskets• Massive gold-plated terminals• Solid rubber magnet protection ring with HELIX logo • Chrome-plated and polished pole plate with HELIX logo• Enclosure made from stable MDF boards for minimized cabinet vibrations• Speaker protection via stable metal bars
Enclosure Subwoofers
B 12E B 10EPower handling RMS / max. 350 / 700 Watts 300 / 600 WattsSensitivity 89 dB 1W / 1m 89 dB 1W / 1mImpedance 2 x 2 Ohms 2 x 2 OhmsMax. linear excursion +/- 6 mm +/- 6 mmDimensions (H x W x D) 380 x 440 x 380 mm /
14.96 x 17.32 x 14.96"335 x 365 x 310 mm / 13.19 x 14.37 x 12.20"
B 12E12" / 300 mm 350 / 700 Watts2 x 2 Ohms89 dB 1W / 1m
B 10E10" / 250 mm300 / 600 Watts2 x 2 Ohms89 dB 1W / 1m
22
P 12E P 10E P 8EPower handling RMS / max. 450 / 900 Watts 400 / 800 Watts 350 / 700 WattsSensitivity 89 dB 1W / 1m 89 dB 1W / 1m 89 dB 1W / 1mImpedance 4 Ohms 4 Ohms 4 OhmsMax. linear excursion +/- 11 mm +/- 8 mm +/- 6 mmDimensions (H x W x D) 395 x 610 x 360 mm /
15.55 x 24.02 x 14.17"355 x 500 x 275 mm / 13.97 x 19.69 x 10.83"
265 x 435 x 270 mm / 10.43 x 17.13 x 10.63"
Features:
• Subwoofer with extremely stiff Kevlar / paper sandwich cone and long-excursion rubber surround with stitching for highest mechanical rating
• Enclosure completely made from MDF boards• Wall thickness up to 28 mm and additional cross-bracing
for minimal enclosure resonance• Particularly large-sized bassreflex tunnel with flow-
optimized funnels at each end for minimum static noise• Extremely hard-wearing felt outer surface with
embroidered HELIX logo• Solid screw terminals• Loudspeaker protection thanks to sturdy metal holders
Enclosure Subwoofers
P 10E10" / 250 mm 400 / 800 Watts4 Ohms89 dB 1W / 1m
P 12E12" / 300 mm 450 / 900 Watts4 Ohms89 dB 1W / 1m
P 8E8" / 200 mm 350 / 700 Watts4 Ohms89 dB 1W / 1m
23
Processors
24
DSP Power 172 MHzSampling rate 48 kHzData converters A/D: BurrBrown
D/A: BurrBrownSignal-to-noise ratio digital input 112 dB (A-weighted)Signal-to-noise ratio analog input 107 dB (A-weighted)Distortion (THD+N) < 0.001 % (digital input)
< 0.003 % (analog input)Crosstalk > 90 dB @ 10 kHzPower supply 9.6 - 18 Volts (5 sec. down to 6 Volts)Additional features Control Input, USB, ground lift switchDimensions (H x W x D) 40 x 177 x 120 mm / 1.58 x 6.97 x 4.75"
DSP Inputs 6 x RCA / Cinch
4 x Highlevel speaker input1 x Optical SPDIF (6 - 96 kHz)1 x Remote In
Input sensitivity RCA / Cinch 2 - 4 VoltsHighlevel 5 - 11 Volts
Outputs 8 x RCA / Cinch1 x Remote Out
Output voltage 4 Volts RMSFrequency response 10 - 22,000 HzDSP resolution 56 Bit
DSP Digital 8-channel signal processor with 48 kHz / 24 Bit signal path Features:
• Powerful "fixed point" Audio DSP with 56 Bit resolution• Freely configurable inputs and outputs with flexible signal summing options• Paragraphic 30-band EQ per channel with ultra-precise 0.25 dB steps• Time-alignment adjustment in narrow 7 mm steps and phase control in
11.25° steps• Various high- and lowpass filter characteristics with 6 - 30 dB slope available• Different signal routing matrices for each signal input section including
configurable signal detections• "Ground lift" switch to avoid ground loops• Control input for connecting remote controls and accessories• Easy configuration thanks to the professional and user-friendly DSP PC-Tool
Version 3 software
25
Processors
DSP Power 295 MHz (1.2 billion MAC operations/second)Sampling rate 96 kHzData converters A/D: Asahi Kasei
D/A: Analog DevicesSignal-to-noise ratio digital input 116 dB (A-weighted)Signal-to-noise ratio analog input 100 dB (A-weighted)Distortion (THD+N) < 0.0006% (digital input)
< 0.001% (analog input)Crosstalk > 90 dBPower supply 9.6 - 18 Volts (5 sec. down to 6 Volts)Additional features Control Input, USB, ground lift switch, HEC slotDimensions (H x W x D) 40 x 177 x 150 mm / 1.58 x 6.97 x 5.91"
DSP PROInputs 8 x RCA / Cinch
8 x Highlevel speaker input1 x Optical SPDIF (12 – 96 kHz)1 x Coax SPDIF (12 - 192 kHz)1 x Remote In
Input sensitivity RCA / Cinch 2 - 4 VoltsHighlevel 5 - 10 Volts or 10 - 20 Volts
Outputs 10 x RCA / Cinch1 x Remote Out
Output voltage 6 Volts RMSFrequency response 10 - 44,000 HzDSP resolution 64 Bit
DSP PRODigital high-end 10-channel signal processor with 96 kHz / 24 Bit signal path
Features:
• Cutting-edge, extremely powerful "fixed point" Audio DSP with 64 Bit resolution• 96 kHz Sampling rate - full audio bandwidth up to more than 40 kHz for
unparalleled audio performance• Parametric 30-band EQ per channel with ultra-precise 0.25 dB steps• Time-alignment adjustment in accurate 3.5 mm steps• Various high- and lowpass filter characteristics with 6 - 42 dB slope available• Different signal routing matrices for each signal input section including
configurable signal detections• HELIX Extension Card slot (HEC) for additional input / output modules like
Bluetooth® Audio Streaming• "Ground lift" switch to avoid ground loops• Control input for connecting remote controls and accessories• Easy configuration thanks to the professional and user-friendly DSP PC-Tool
Version 3 software
Accessories
26
DIRECTORRemote control with Touchscreen
Features
• 2.8“ / 7 cm touchscreen display and powerful ARM processor• Easy handling of the main functions - Volume control of all sources - Volume control of the subwoofer - Source selection - Control of the HEC BT module (Bluetooth® Connect functions: pairing, reconnect, disconnect / Bluetooth® Control functions: track forward/back, play/pause) - Switching between sound setups• Memory locations for 20 additional sound setups• Automatic dimming function of the display• Display rotation adjustable to 180° • USB Paththrough - to connect your computer to the DSP• Compatible with all DSP products which are supported by
DSP PC-Tool Version 3• Exclusive solid aluminum housing• 17’ / 5.2 m connection cable included• Dimensions (H x W x D): 53.50 x 135 x 18 mm /
2.07 x 5.32 x 0.71"
URC 2AAnalog cable remote control for DSP products
Features
• Knobs and switch can be freely defined in the DSP PC-Tool Software
• Cable length 195" / 5 m • An up-to-date list of device compatibility
can be found at www.audiotec-fischer.com
DIRECTOR graphical user interface
Volume menu
Bluetooth® Control menu
REMOTE CONTROLS
27
Acessories
HEC OPTICAL IN
HELIX EXTENSION CARDS
MTKMeasurement Tool Kit for analysing the acoustical frequency response in the car
Features
• High-grade measurement microphone• External USB sound card with phantom
powering • Microphone cable 2.5 m • USB stick including test signals and
software
HEC AUX IN
Features
HEC BT Bluetooth® input module • Bluetooth® audio streaming featuring
Qualcomm® aptX™ audio• Compatible with all devices featuring
Bluetooth® wireless technology• Direct digital signal transmission to DSP
for lossless audio processing• Additional digital optical output
HEC AUX IN3.5 mm AUX input module • AUX input with a 3.5 mm jack for an
external audio source• Input sensitivity of 200 mV suits well for
most portable devices• Automatic signal detection• Additional digital optical output
HEC OPTICAL INOptical input module • Accepts all digital sources with SPDIF
format (stereo PCM only)• Input sampling rate from 28 kHz to 96 kHz• High jitter immunity• Automatic signal detection
The HEC modules are delivered with the device specific side panel and available for HELIX DSP PRO, HELIX P SIX DSP, HELIX P SIX DSP MK2.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audiotec Fischer GmbH is under license. Other trademarks and trade names are those of their respective owners.
HEC BT
EPC 5.2Cable harness for an easy connection of HELIX products to factory car radios• Cable length 5.00 m• An up-to-date list of device
compatibility can be found at www.audiotec-fischer.com
PP-ACCable adaptor for connecting HELIX amplifiers and processors to the original cable harness of the vehicle. These adap-tors are compatible with the Easy Plug Cable EPC5.2. The required adaptor can be found at www.audiotec-fischer.com
28
Accessories
AAC.2Smart Active Analog Converter
Features
• Suitable for all car radios - a perfect match for upgrading factory sound systems (even those with factory-installed amps)
• Generates a stereo preamplifier signal from the speaker output signal of a car radio or amplifier
• "Double Activation Circuit" - generates a +12 V remote signal in three different ways to turn on connected amplifiers
• Excellent sound quality thanks to very wide frequency response (18 Hz - 22 kHz)
• "Power Save Mode" significantly reduces the power consumption of connected amplifiers when no input signal is present
• "Diagnostics Error Protection" circuit avoids undesired error messages in the CPU of your car
• Low standby current consumption• Extremely compact and therefore easy to install• Maximum reliability thanks to top-notch SMD manufacturing technology
CAP 33Alternator noise suppression cap with a capacity of 33.000 μF • Diameter: 1.38" / 35 mm• Length: 4" / 100 mm
CAP 1000Power cap with a capacity of 1.000.000 μF• Diameter: 3" / 75 mm • Length: 11.1" / 282 mm
CAP holder setHolder set for mounting HELIX CAP 1000
29
DSP PC-Tool
The DSP PC-Tool software is used to configure all DSP products from Au-diotec Fischer. This professional and user-friendly software with its numer-ous adjustments options allow an extremely precise sound tuning even under most demanding acoustical conditions.
Sensationally simple, simply sensationalNever before it was easier and faster to achieve the perfect sound. With the Autoset function Au-diotec Fischer strikes the right balance between the manual setting and fully automatic adjust-ment. Autoset transfers the correction values of the integrated real-time analyzer to the EQ setting but the main difference is that you can define the frequency range for the correction. So useless and probably even speaker damaging EQ adjustments, as often provided by fully au-tomatic systems, will be avoided. Now you can make several measurements consecutively and modify each time the frequency range for the optimization.
Intelligent t ime alignment Thanks to the intelligent "Distance" mode adjusting the time alignment becomes a child´s play. All you have to do is measuring the distance between the speakers and listening position and enter these values in cm or inches into the corresponding input field. The program automatically calculates the necessary time delay for each channel.
Everything under control
Sound Tuning MagazineLoads of hints and tricks how to use our DSP PC-Tool software versions plus several ad-vice for a proper calibration of a sound equipment can be found in our Sound Tuning Maga-zines " DSP Spe-
cial Vol.1" and "DSP Special Vol.2". They can be downloaded for free at the Audiotec Fischer website www.audiotec-fischer.com
30
Technology
Ready for start / stopEven if the input voltage drops to 6 Volts the power supply assures a con-stant internal supply voltage. An ideal precondition for using our amps in cars with start / stop technology.
0
2
4
6
8
10
12
14
16
18
20
0 100 200 300 400 500
Time [msec]
Volta
ge [V
]
Battery voltageMCM output voltage
Amplifier supply voltage during engine start
The overall concept makes the dif ferenceTo develop products for the perfect sound quality is not easy to realize. It is the optimization of every single detail without any compromise. Choosing the right components is certainly of high importance but often the tiny technical details differ Audiotec Fischer products from the competitors.
• Sophisticated, low-noise power supplies with independent regulators for the analog and digital stages.• All internal voltages operate independently of the onboard voltage within the range of 6 - 17 Volts • Complex additional filtering of all power and signal lines with EMI-filters • Low-impedance PCB designs in 4-layer or even 6-layer technology with at least one separate ground layer• Strict separation of analog and digital signals on separate layers of the circuit board • Shortest possible signal routing with direct “Input-to-Output” signal flow • Separate micro controllers for all “non-audio” processes
Analog signalDigital signal
Sign
al in
put
Sign
al o
utpu
tDSP
AD/DAcon-
verter
2
3
1
2
3
4
1
Area for power supply
Area only for audio processing
INPUT OUTPUTShortest possible signal routing
Smart highlevel inputThe latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If an usual amplifier will be installed failure messages and loss of specific features (e.g. fader function) will be the result.The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.
31
Class AB The most common and traditional analog amplifier concept. This technology is still unbeatable when uncompromising sound quality is a must. Though Class AB amps generate more heat compared to digital amplifier concepts and therefore require larger heat sinks and higher supply currents they will be audiophile's preferred choice.
Class D This digital (switching) amplifier concept offers significantly better efficiency than Class AB amplifiers. Besides lower heat dissipation, Class D amplifiers require lower currents from the power supply means less stress for the car’s battery / alternator system as well. Nevertheless Class D amps still do not achieve the excellent figures of the best Class AB designs in terms of THD, bandwidth and damping factor.
Ultra HD Class D Compared to conventional Class D amps, this concept achieves an extended frequency response to more than 40 kHz in combination with reduced distortion thanks to an advanced integrated feedback design. Ultra HD Class D achieves outstanding, "Class AB-like" sound quality combined with the efficiency of a Class D amplifier.
Class GD and Pure Class GD Audiotec Fischers proprietary Class GD and Pure Class GD concepts take the efficiency of conventional Class D amps to the next level. By varying the internal supply voltage depending on the amplifier’s input signals, idle losses are significantly reduced and overall efficiency is close to maximum at any time. So heat dissipation is almost negligible thus allowing smallest heat sinks and most compact form factors. Besides that our Pure Class GD amps outperform conventional Class D designs in terms of sound quality by implementing a fully differential signal path and improved output filter design.
"State-of-the-art ” digital signal processingEvery DSP is not the same – the quality of a digital signal processor strongly depends is simply a matter of precision. The more complex the sound manipulation options are, the higher the signal processing resolution has to be. Without this precision you end up with increased noise level and distortion. That’s why Audiotec Fischer solely uses pure Audio DSPs with at least 56 Bit resolution. Furthermore we count on the fixed-point arithmetic which outperformed floating-point arithmetic with 32 Bit word length (as used in typical multimedia DSPs).
Amplif ier technologies
Systematic
diagram of
our Class GD
concept
