WDT0471-401R6 · 2020. 8. 27. · Main boom with hammerhead acc. prEN13000(2003) & DIN15018/3...

122

Transcript of WDT0471-401R6 · 2020. 8. 27. · Main boom with hammerhead acc. prEN13000(2003) & DIN15018/3...

  • z550424

  • SCX2500 Precautions of lifting capacities (For Crane) EC404019 (P-1/2)

    1.

    2. Capacities marked with are based on machine structural limitation factors other than those which would cause a tipping condition.

    3. A deduction must be made from the lifting capacities for the weight of the following:(Main boom + Jib) hook blocks, hooks, slings, spreader bar, or other suspended gear e.t.c.

    4. High gantry is required for all operating conditions.

    5. The wind velocity on the lifting capacities shows the instantaneous wind velocity.

    6. Crane must be operated with the counterweight of below listed condition.Boom length 15.25m - 18.30m : 87.7t upper counterweight + 14.0t lower weightBoom length 21.35m and over: 93.7t upper counterweight + 14.0t lower weight

    7. Do not lift or suspend a load from the jib hook and main boom hoist hook at the same time.

    8. Hoist reeving.

    Available rope : P・S(19)+39×P・7 (Breaking strength 755kN or more)

    250/135t 3.3/2.6 250.0 230.0 209.0 186.0 162.0 135.0 121.5 108.0 94.5 81.0 67.5 54.0 40.5 27.0 13.580t 1.4 - - - - - - - - - 80.0 67.5 54.0 40.5 27.0 13.535t 0.9 - - - - - - - - - - - - 35.0 27.0 13.5

    13.5t 0.6 - - - - - - - - - - - - - - 13.5No, of reeving 20 18 16 14 12 10 9 8 7 6 5 4 3 2 1

    37-099-027.2ER0S0503

    Capacities shown are in metric tons, and are determined according to EN13000-over the side-with machine standing levelon firm supporting surface under ideal job conditions.

    Max. of load (t)Kind of hook block(t) Mass of hook block (t)

  • SCX2500 Precautions of lifting capacities (For Luffing) EC404019 (P-2/2)

    1.

    2. Capacities marked with are based on machine structural limitation factors other than those which would cause a tipping condition.

    3.

    4. A deduction must be made from the jib lifting capacities for the weight of the following:(Luffing jib +Jib base hoist) hook blocks, hooks, slings, spreader bar, or other suspended gear e.t.c.

    5. High gantry is required for all operating conditions.

    6. The wind velocity on the lifting capacities shows the instantaneous wind velocity.

    7. Do not lift or suspend a load from the luffing jib hook and jib base hoist hook at the same time.

    8. Hoist reeving.Available rope : P・S(19)+39×P・7 (Breaking strength 755kN or more)

    80t 1.4 80.0 67.5 54.0 40.5 27.0 13.535t 0.9 - - - 35.0 27.0 13.5

    13.5t 0.6 - - - - - 13.5No,of reeving 6 5 4 3 2 1

    37-099-027.2ER0S0503

    Max. load (t)Kind of hook block(t) Mass of hook block(t)

    Capacities shown are in metric tons, and are determined according to EN13000-over the side-with machine standing level on firm supporting surface under ideal job conditions.

    Operation must be very careful when using luffing jib hook, while jib base hoist hook is suspended because jib base hoist hook is possible to hit the boomand thus boom will be damaged.

  • SCX2500, lifting chart 360deg, main boom hammerhead Summary chart based on Euro-standard

    87.7t upper counterweight + 14.0t lower weightUnit: t

    Boom length(m) 15.25 18.30Reeved lines 20 18Wind(m/sec)Radius(m) 17 17

    4.5 2505.0 231 214/5.46.0 191 1907.0 164 1638.0 144 1439.0 128 12810.0 115 11512.0 92.3 91.914.0 74.3 73.816.0 68.3/14.9 61.518.0 54.5/17.5

    Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • SCX2500, lifting chart 360deg, main boom hammerhead Summary chart based on Euro-standard 93.7t upper counterweight + 14.0t lower weight

    Unit: t

    Boom length(m) 21.35 24.40 27.45 30.50 33.50 36.55 39.60 42.65 45.70 48.75 51.80 54.85 57.90 60.95 64.00 67.05 70.10Reeved lines 16 14 12 12 10 9 9 8 7 7 6 6 5 5 4 4 3Wind(m/sec)Radius(m) 17 14 14 14 14 14 14 11 11 11 11 11 11 11 11 11 11

    5.0 192/5.96.0 190 178/6.47.0 163 163 162 152/7.58.0 143 143 143 143 135 120/8.59.0 128 127 127 127 126 119 118/9.1 105/9.610.0 115 115 115 114 111 108 106 103 93.5/10.1 86.9/10.7 79.0/11.2 70.7/11.712.0 95.1 94.7 94.2 92.0 89.7 87.3 85.7 83.4 81.7 79.7 76.4 69.6 63.6/12.2 56.9/12.8 51.1/13.3 42.9/13.814.0 77.4 77.1 76.9 76.1 74.7 73.0 71.9 70.0 68.7 67.1 65.6 64.3 60.1 54.8 50.0 42.8 39.9/14.416.0 64.2 63.9 63.6 63.2 63.0 62.1 61.5 60.0 59.0 57.6 56.4 55.3 54.4 51.7 47.1 41.5 38.918.0 54.6 54.3 54.0 53.5 53.2 52.8 52.8 52.2 51.3 50.1 49.1 48.2 47.5 46.6 44.6 40.4 36.820.0 47.4 47.0 46.7 46.2 46.0 45.5 45.5 45.1 45.1 44.2 43.3 42.5 41.9 41.1 40.2 38.3 34.922.0 46.6/20.2 41.4 41.0 40.5 40.2 39.8 39.8 39.4 39.3 38.9 38.5 37.8 37.2 36.5 35.8 35.0 33.224.0 39.1/22.8 36.4 35.9 35.6 35.1 35.1 34.7 34.6 34.2 34.0 33.8 33.3 32.7 32.0 31.3 30.726.0 33.6/25.5 32.1 31.8 31.3 31.3 30.8 30.8 30.4 30.1 30.0 29.8 29.4 28.8 28.1 27.628.0 29.0 28.6 28.1 28.1 27.6 27.5 27.1 26.8 26.7 26.6 26.4 26.0 25.4 24.930.0 28.8/28.1 26.0 25.4 25.4 24.9 24.8 24.4 24.1 23.9 23.8 23.6 23.4 23.0 22.632.0 25.1/30.8 23.2 23.1 22.6 22.4 22.0 21.7 21.6 21.5 21.2 21.0 20.7 20.534.0 21.8/33.4 21.1 20.6 20.4 20.0 19.6 19.5 19.4 19.2 18.9 18.6 18.436.0 19.4 18.8 18.6 18.2 17.8 17.7 17.6 17.3 17.1 16.8 16.638.0 17.3 17.1 16.6 16.3 16.1 16.0 15.7 15.5 15.2 15.040.0 16.8/38.7 15.7 15.2 14.9 14.7 14.6 14.3 14.0 13.7 13.542.0 14.9/41.3 14.0 13.6 13.4 13.3 13.0 12.8 12.4 12.344.0 12.9 12.5 12.3 12.2 11.9 11.6 11.3 11.146.0 11.5 11.3 11.1 10.8 10.6 10.3 10.048.0 11.2/46.6 10.4 10.2 9.9 9.6 9.3 9.150.0 9.9/49.2 9.4 9.1 8.8 8.4 8.252.0 8.6/51.9 8.3 8.0 7.7 7.454.0 7.6 7.3 7.0 6.756.0 7.4/54.5 6.6 6.3 6.058.0 6.2/57.2 5.7 5.460.0 5.2/59.8 4.862.0 4.364.0 4.2/62.4

    Main boom with hammerhead acc. prEN13000(2003) & DIN15018/3

    Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404016 (P- 1/2) SCX2500, lifting chart 360deg, main boom hammerhead with short jib Summary chart based on Euro-standard

    87.7t upper counterweight + 14.0t lower weightUnit: t

    Boom length(m) 15.25 18.30Reeved lines 20 18Wind(m/sec)Radius(m) 17 17

    4.5 249.45.0 230.4 213.4/5.46.0 190.4 189.47.0 163.4 162.48.0 143.4 142.49.0 127.4 127.410.0 114.4 114.412.0 91.7 91.314.0 73.7 73.216.0 67.7/14.9 60.918.0 53.9/17.5

    37- 102- 043.0ER1S 0406

  • EC404016 (P- 2/2)

    SCX2500, lifting chart 360deg, main boom hammerhead with short jib Summary chart based on Euro-standard 93.7t upper counterweight + 14.0t lower weight

    Unit: t

    Boom length(m) 21.35 24.40 27.45 30.50 33.50 36.55 39.60 42.65 45.70 48.75 51.80 54.85 57.90 60.95 64.00 67.05 70.10Reeved lines 16 14 12 12 10 9 9 8 7 7 6 6 5 5 4 4 3Wind(m/sec)Radius(m) 17 14 14 14 14 14 14 11 11 11 11 11 11 11 11 11 11

    5.0 191.4/5.96.0 189.4 177.4/6.47.0 162.4 162.4 161.4 151.4/7.58.0 142.4 142.4 142.4 142.1 134.1 119.1/8.59.0 127.4 126.4 126.2 126.1 125.1 118.1 117.1/9.1 104.1/9.610.0 114.2 114.2 114.2 113.1 110.1 107.1 105.1 102.1 92.9/10.1 86.3/10.7 78.4/11.2 70.1/11.712.0 94.5 94.1 93.6 91.4 89.1 86.7 85.1 82.8 81.1 79.1 75.8 69.0 63.0/12.2 56.3/12.8 50.5/13.3 42.3/13.814.0 76.8 76.5 76.3 75.5 74.1 72.4 71.3 69.4 68.1 66.5 65.0 63.7 59.5 54.2 49.4 42.2 39.3/14.416.0 63.6 63.3 63.0 62.6 62.4 61.5 60.9 59.4 58.4 57.0 55.8 54.7 53.8 51.1 46.5 40.9 38.318.0 54.0 53.7 53.4 52.9 52.6 52.2 52.2 51.6 50.7 49.5 48.5 47.6 46.9 46.0 44.0 39.8 36.220.0 46.8 46.4 46.1 45.6 45.4 44.9 44.9 44.5 44.5 43.6 42.7 41.9 41.3 40.5 39.6 37.7 34.322.0 46.0/20.2 40.8 40.4 39.9 39.6 39.2 39.2 38.8 38.7 38.3 37.9 37.2 36.6 35.9 35.2 34.4 32.624.0 38.5/22.8 35.8 35.3 35.0 34.5 34.5 34.1 34.0 33.6 33.4 33.2 32.7 32.1 31.4 30.7 30.126.0 33.0/25.5 31.5 31.2 30.7 30.7 30.2 30.2 29.8 29.5 29.4 29.2 28.8 28.2 27.5 27.028.0 28.4 28.0 27.5 27.5 27.0 26.9 26.5 26.2 26.1 26.0 25.8 25.4 24.8 24.330.0 28.2/28.1 25.4 24.8 24.8 24.3 24.2 23.8 23.5 23.3 23.2 23.0 22.8 22.4 22.032.0 24.5/30.8 22.6 22.5 22.0 21.8 21.4 21.1 21.0 20.9 20.6 20.4 20.1 19.934.0 21.2/33.4 20.5 20.0 19.8 19.4 19.0 18.9 18.8 18.6 18.3 18.0 17.836.0 18.8 18.2 18.0 17.6 17.2 17.1 17.0 16.7 16.5 16.2 16.038.0 16.7 16.5 16.0 15.7 15.5 15.4 15.1 14.9 14.6 14.440.0 16.2/38.7 15.1 14.6 14.3 14.1 14.0 13.7 13.4 13.1 12.942.0 14.3/41.3 13.4 13.0 12.8 12.7 12.4 12.2 11.8 11.744.0 12.3 11.9 11.7 11.6 11.3 11.0 10.7 10.546.0 10.9 10.7 10.5 10.2 10.0 9.7 9.448.0 10.6/46.6 9.8 9.6 9.3 9.0 8.7 8.550.0 9.3/49.2 8.8 8.5 8.2 7.8 7.652.0 8.0/51.9 7.7 7.4 7.1 6.854.0 7.0 6.7 6.4 6.156.0 6.8/54.5 6.0 5.7 5.458.0 5.6/57.2 5.1 4.860.0 4.6/59.8 4.262.0 3.764.0 3.6/62.4

    Main boom with hammerhead acc. prEN13000(2003) & DIN15018/3

    37- 102- 043.0ER1S 0406

  • EC404015 (P- 1/2) SCX2500, lifting chart 360deg, short jib Summary chart based on Euro-standard

    87.7t upper counterweight + 14.0t lower weightUnit: t

    Boom length(m) 15.25 18.30Reeved lines 1 1Wind(m/sec)Radius(m) 17 17

    5.0 13.5/5.66.0 13.5 13.5/6.17.0 13.5 13.58.0 13.5 13.59.0 13.5 13.510.0 13.5 13.512.0 13.5 13.514.0 13.5 13.516.0 13.5 13.518.0 13.5/16.3 13.520.0 13.5/18.9

    37- 131- 070.0ER0S 0405

  • EC404015 (P- 2/2) SCX2500, lifting chart 360deg, short jib Summary chart based on Euro-standard 93.7t upper counterweight + 14.0t lower weight

    Unit: t

    Boom length(m) 21.35 24.40 27.45 30.50 33.50 36.55 39.60 42.65 45.70 48.75 51.80 54.85 57.90 60.95 64.00 67.05 70.10Reeved lines 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1Wind(m/sec)Radius(m) 17 14 14 14 14 14 14 11 11 11 11 11 11 11 11 11 11

    6.0 13.5/6.77.0 13.5 13.5/7.2 13.5/7.78.0 13.5 13.5 13.5 13.5/8.3 13.5/8.89.0 13.5 13.5 13.5 13.5 13.5 13.5/9.3 13.5/9.8

    10.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5/10.4 13.5/10.9 13.5/11.412.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5/12.5 13.5/13.0 13.5/13.514.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5/14.1 13.5/14.6 13.5/15.116.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.518.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.520.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.522.0 13.5/21.6 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.524.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.526.0 13.5/24.2 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.528.0 13.5/26.8 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.530.0 13.5/29.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.532.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.534.0 13.5/32.1 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.536.0 13.5/34.8 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.538.0 13.5/37.4 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.540.0 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.5 13.542.0 13.5 13.5 13.5 13.5 13.5 13.0 12.8 12.4 12.344.0 13.5/42.7 12.9 12.5 12.3 12.2 11.9 11.6 11.3 11.146.0 12.7/45.3 11.5 11.3 11.1 10.8 10.6 10.3 10.048.0 10.5 10.4 10.2 9.9 9.6 9.3 9.150.0 9.5 9.4 9.1 8.8 8.4 8.252.0 9.2/50.6 8.6 8.3 8.0 7.7 7.454.0 8.1/53.2 7.6 7.3 7.0 6.756.0 6.9/55.9 6.6 6.3 6.058.0 5.9 5.7 5.460.0 5.7/58.5 5.1 4.862.0 4.7/61.2 4.364.0 3.3/63.5

    Main boom with hammerhead acc. prEN13000(2003) & DIN15018/3

    37- 131- 070.0ER0S 0405

  • EC404025 (P-1/42)

    SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 6 6 5 3 6 6 4 3 6 6 4 3 5 5 4 3 5 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 70.0/9.310.0 70.0 69.8/10.211.0 70.0 70.0/11.5 69.5 69.4/11.112.0 63.9 70.0 69.2 69.5/12.6 68.7 63.9 54.1/12.913.0 57.0 65.2 65.8 69.4 67.3 69.3/13.6 62.1 54.014.0 51.3 58.2 59.3 67.0 64.6 67.0 59.8 60.3/14.6 53.015.0 46.4 52.3 53.9 60.5 61.3 64.3 57.6 59.5 52.1 51.9/15.716.0 44.9 47.4 49.3 55.0 56.2 61.8 55.5 57.3 51.1 51.618.0 37.6 41.9 54.5/18.5 44.3 46.1 47.9 52.7 51.8 53.4 48.0 49.320.0 31.6 35.3 47.1 37.9 41.8 49.5 43.9 45.3 45.0/21.5 46.5 49.9 45.2 46.322.0 26.3 29.7 39.6 32.6 36.0 43.8 38.3 41.8 43.8 41.3 44.1 40.6/23.1 40.8 43.524.0 23.9/23.4 26.2 33.6 27.9 31.0 39.4 33.4 36.5 39.3 36.9 39.3 39.0 36.6 38.8 37.5/24.626.0 24.6/24.5 30.4 34.4 24.8 26.4 34.3 32.6/26.9 29.2 32.0 35.5 32.8 35.3 35.3 32.9 35.0 35.328.0 25.1 31.4 24.0/26.3 24.6/27.4 31.7 31.2 26.2 27.9 32.4 29.9/28.9 29.2 31.5 32.2 29.5 31.6 32.430.0 24.8/28.1 28.9 27.2 28.7 23.8/29.3 24.4 29.8 28.5 25.9 28.1 29.5 27.3/30.8 26.5 28.4 29.432.0 26.2/31.6 24.6/31.1 26.5 24.4/30.4 27.6 26.4 22.5 24.9 27.3 26.1 23.7 25.6 26.9 25.2/32.834.0 24.6 24.6 24.5 22.1/32.2 22.8/33.3 25.3 24.2 21.1 22.9 24.8 24.236.0 24.1/34.5 22.8 23.6 22.5 19.5/35.2 20.2 23.1 22.538.0 21.7/37.5 22.7/37.0 21.1 19.7/36.3 21.7 21.040.0 19.8 20.3/39.9 19.742.0 19.5/40.4 18.644.0 17.9/43.4

    tower 21.35m33.5030.5027.4524.4021.35

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P-2/42)

    SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 4 3 3 2 3 3 3 2 3 3 2 2 2 2 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    13.0 47.0/13.814.0 46.9 40.7/14.715.0 46.1 40.5 34.8/15.616.0 45.3 44.8/16.7 39.8 38.8/17.8 34.5 30.1/16.5 26.3/17.418.0 44.0 44.1 38.5 38.7 33.4 33.0/18.8 29.5 28.8/19.8 26.120.0 42.2 42.9 37.5 37.5 32.5 32.5 28.6 28.7 25.3 24.9/20.922.0 40.0 40.8 36.7 36.5 31.7 31.6 27.8 27.8 24.6 24.624.0 35.9 38.1 35.3 35.8 31.1 30.9 27.2 27.1 24.0 23.926.0 32.5 34.3 34.8/26.1 32.0 33.8 31.0/27.6 30.5 30.3 26.8 26.5 23.3 23.428.0 29.4 31.2 31.3 29.1 30.7 30.3 28.6 29.6 27.6/29.2 25.1 26.1 21.7 22.630.0 26.5 28.4 28.4 26.4 28.0 27.4 26.6 27.8 26.7 23.6 24.4 24.8/30.7 20.3 21.132.0 24.0 25.7 25.9 24.0 25.6 25.0 24.2 25.7 24.3 22.2 23.0 23.5 19.1 19.8 21.6/32.234.0 21.6 23.2 23.8 23.0/34.8 21.8 23.2 22.9 22.1 23.5 22.3 21.0 21.6 21.5 18.0 18.6 20.836.0 19.4 21.0 22.1 22.1 19.8 21.2 21.2 21.3/36.7 20.2 21.5 20.5 19.9 20.5 19.8 17.0 17.5 19.138.0 17.1 18.8 20.6 20.8 17.9 19.2 19.7 20.4 18.5 19.7 19.0 19.8/38.7 18.5 19.5 18.3 16.1 16.6 17.640.0 17.0/38.1 17.1/39.2 19.4 19.5 16.0 17.4 18.5 19.1 16.8 18.0 17.8 19.1 17.0 18.1 17.1 18.6/40.6 15.3 15.8 16.442.0 18.5 18.3 15.0/41.0 15.5 17.4 18.0 15.2 16.4 16.7 18.0 15.5 16.6 16.0 17.7 14.7 15.0 15.3 16.8/42.644.0 18.0/42.9 17.3 15.3/42.2 16.6 17.0 13.5 14.8 15.8 16.9 14.2 15.2 15.0 16.5 14.1 14.4 14.3 16.146.0 16.3 15.8/45.8 16.0 13.9/45.1 15.0 15.9 12.7 13.8 14.2 15.5 13.2 13.9 13.5 15.048.0 16.1/46.3 15.2 14.5 15.0 12.0/46.9 12.4 13.6 14.6 12.0 13.0 12.8 14.150.0 14.6/49.3 14.3/48.7 14.1 13.0 13.8 10.8/49.9 11.7 12.2 13.352.0 13.7 12.4/51.7 13.2 11.0/51.0 11.7 12.654.0 13.6/52.2 12.8 11.4 12.156.0 12.7/55.1 11.3/54.6 11.758.0 11.460.0 11.3/58.1

    36.55 48.7545.7042.6539.60tower 21.35m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P-3/42)

    SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 2 2 2 2 2 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 25.6/18.3 22.0/19.120.0 25.1 24.5/21.9 21.8 19.6 17.3/20.922.0 24.5 24.5 21.2 20.9/23.0 19.1 17.124.0 24.0 23.9 20.8 20.7 18.7 18.6 16.6 16.6/25.126.0 23.6 23.3 19.9 20.3 17.6 18.2 15.6 16.228.0 22.9 22.9 18.8 19.4 16.6 17.1 14.6 15.130.0 21.7 22.4 17.8 18.3 15.6 16.1 13.7 14.232.0 20.6 21.2 21.3/33.7 16.9 17.4 14.8 15.2 13.0 13.434.0 19.6 20.1 21.3 16.0 16.5 17.4/35.3 14.0 14.4 12.3 12.636.0 18.7 19.2 20.2 15.3 15.7 17.2 13.3 13.7 14.7/36.8 11.6 12.038.0 17.9 18.3 18.7 14.6 15.0 16.4 12.7 13.1 14.3 11.1 11.4 12.4/38.340.0 17.2 17.6 17.4 14.0 14.4 15.6 12.2 12.5 13.6 10.5 10.8 11.942.0 16.0 16.9 16.2 13.5 13.6 14.9 11.7 11.9 13.0 10.1 10.3 11.344.0 14.8 15.7 15.2 16.4/44.6 13.0 13.3 14.3 11.2 11.4 12.4 9.6 9.9 10.746.0 13.6 14.5 14.3 15.7 12.6 12.6 13.7 14.5/46.5 10.8 11.0 11.8 9.2 9.5 10.248.0 12.5 13.4 13.4 14.7 12.2 12.4 12.9 14.1 10.4 10.4 11.4 12.1/48.5 8.9 9.1 9.850.0 11.5 12.3 12.7 13.8 11.9 12.1 12.2 13.3 10.1 10.3 10.9 11.7 8.6 8.8 9.4 10.0/50.452.0 10.4 11.2 12.1 13.1 10.9 11.7 11.5 12.5 9.9 10.0 10.6 11.3 8.3 8.5 9.0 9.754.0 9.9/52.8 10.1/53.9 11.6 12.4 9.9 10.7 11.0 11.9 9.6 9.8 10.2 10.8 8.1 8.2 8.7 9.356.0 11.1 11.8 9.0/55.8 9.7 10.5 11.2 9.4 9.6 10.0 10.5 7.9 8.1 8.4 9.058.0 10.7/57.6 11.3 9.2/56.9 10.0 10.7 8.5 9.2 9.5 10.2 7.8 8.0 8.2 8.660.0 10.9 9.7 10.2 8.1/58.7 8.8/59.8 9.2 9.9 7.7 7.9 8.0 8.462.0 10.7/61.0 9.6/60.5 9.8 8.8 9.4 7.6/61.7 7.8 7.8 8.164.0 9.5 8.5/63.5 9.1 7.7/62.8 7.7 8.066.0 8.8 7.6 7.868.0 8.7/66.9 7.5/66.4 7.670.0 7.4/69.9

    tower 21.35m51.80 54.85 57.90 60.95

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 4/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 6 6 4 3 6 6 4 3 6 5 4 3 5 5 3 2 4 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 69.6/9.410.0 69.5 69.4/10.311.0 69.3 69.6/11.8 69.1 68.8/11.212.0 64.7 69.5 68.6 69.3/12.8 68.0 62.4/12.113.0 57.7 67.3 66.5 69.1 65.2 65.2/13.9 60.4 53.714.0 51.8 63.3 59.9 68.6 62.7 65.1 58.1 58.2/14.9 52.715.0 46.9 53.8 54.4 62.1 60.3 62.5 56.0 58.0 51.6 51.5/15.916.0 42.7 48.6 49.7 56.3 56.7 60.2 54.1 55.9 49.9 51.418.0 37.9 40.4 50.5/19.3 44.7 47.2 48.3 53.8 50.6 52.1 46.9 48.220.0 31.9 36.1 48.6 38.2 40.1 46.1/20.8 44.3 46.1 46.9 48.9 44.2 45.422.0 26.6 30.4 42.3 32.9 36.7 42.9 38.5 40.0 42.1/22.3 41.9 44.8 38.2/23.9 41.6 42.924.0 24.0/23.5 25.2 35.8 28.1 31.6 38.5 33.7 37.2 38.4 37.0 40.3 38.1 36.9 40.1 35.4/25.426.0 24.4/24.8 32.4 32.5/26.3 25.1 27.0 34.9 29.4 32.6 34.7 32.9 35.8 34.5 33.0 35.7 34.528.0 27.3 30.2 24.0/26.4 24.5/27.7 31.8 29.6/28.2 25.3 28.4 31.7 29.3 31.9 31.4 29.6 32.0 31.430.0 24.8/28.9 27.8 29.0 27.5 23.8/29.4 26.0 29.1 27.1/30.2 25.9 28.4 28.8 26.5 28.8 28.832.0 25.7 24.5/31.9 25.4 24.6/30.6 26.9 25.3 22.6 25.2 26.6 24.9/32.1 23.8 25.9 26.634.0 24.8/32.9 23.6 25.0 23.5 22.1/32.3 23.1/33.6 24.7 23.2 21.1 23.2 24.7 23.1/34.136.0 22.1/35.8 24.2/34.8 21.9 23.0 21.6 19.3/35.3 20.5 23.0 21.638.0 20.5 21.4/37.8 20.2 19.8/36.5 21.5 20.240.0 19.9/38.8 18.9 20.2 18.942.0 18.0/41.7 19.7/40.7 17.844.0 16.846.0 16.4/44.7

    30.5021.35 24.40 27.45tower 24.40m

    33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 5/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 3 3 3 2 3 3 3 2 3 3 2 2 2 2 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    13.0 46.8/13.914.0 46.7 40.4/14.815.0 45.8 40.3 34.4/15.716.0 45.0 44.8/17.0 39.6 34.3 29.9/16.6 26.2/17.518.0 43.7 44.0 38.3 38.6 33.2 32.8/19.1 29.3 26.020.0 41.3 42.3 37.3 37.4 32.3 32.4 28.4 28.3/20.1 25.2 24.8/21.222.0 39.2 40.1 36.4 36.4 31.5 31.5 27.7 27.7 24.5 24.624.0 36.6 38.1 34.7 35.3 30.9 30.8 27.1 27.0 23.9 23.926.0 32.7 35.4 32.7/26.9 32.5 33.8 30.5 30.2 26.6 26.4 23.4 23.328.0 29.4 31.8 31.1 29.2 31.5 30.3/28.4 28.6 29.7 25.2 25.9 21.8 22.830.0 26.6 28.6 28.5 26.4 28.4 28.2 26.7 28.0 28.2 23.6 24.6 24.8/31.5 20.4 21.732.0 24.0 25.9 26.3 24.0 25.8 25.8 24.3 26.0 25.7 22.2 23.1 24.7 19.1 19.9 21.5/33.034.0 21.7 23.4 24.4 21.8 23.5 24.0 22.1 23.7 23.8 21.0 21.8 23.1 18.0 18.7 21.336.0 19.5 21.2 22.7 21.1/36.1 19.8 21.3 22.1 20.2 21.7 22.0 19.9 20.6 21.2 17.0 17.6 20.038.0 17.2 19.0 21.2 19.8 17.9 19.4 20.5 19.5 18.5 19.8 20.3 18.5 19.6 19.6 16.1 16.7 18.840.0 16.9/38.2 17.3/39.5 19.9 18.5 16.0 17.5 19.1 18.3 16.8 18.1 18.9 18.3 17.0 18.2 18.2 17.0/41.9 15.3 15.8 17.542.0 18.7 17.4 14.9/41.1 15.7 18.0 17.1 15.2 16.5 17.7 17.2 15.5 16.7 17.0 16.9 14.7 15.1 16.3 15.7/43.944.0 17.7/43.6 16.4 15.3/42.4 17.0 16.1 13.5 14.9 16.7 16.2 14.2 15.3 16.0 15.9 14.1 14.5 15.3 15.746.0 15.6 16.0 15.2 13.4/44.1 13.7/45.4 15.9 15.2 12.7 13.9 15.1 15.0 13.2 13.9 14.4 14.848.0 14.9/47.6 15.7/46.6 14.4 15.2 14.4 11.9/47.0 12.5 14.3 14.1 12.0 13.1 13.6 14.050.0 13.7 14.6/49.5 13.7 12.2/48.3 13.7 13.4 10.7 11.8 12.9 13.252.0 13.6/50.5 13.0 13.3 12.7 10.9/51.3 12.4 12.554.0 12.4/53.5 13.2/52.5 12.1 12.0 11.956.0 11.5 11.7/55.4 11.358.0 11.3/56.4 10.860.0 10.3/59.4

    36.55 39.60 42.65tower 24.40m

    45.70 48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 6/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 2 2 2 2 2 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 25.3/18.4 21.9/19.320.0 24.9 21.7 19.4/20.1 17.2/21.022.0 24.3 24.3/22.2 21.1 20.7/23.2 19.0 17.024.0 23.8 23.8 20.7 20.6 18.5 18.8/24.3 16.6 16.5/25.326.0 23.4 23.2 20.0 20.2 17.6 18.1 15.6 16.228.0 23.0 22.6 18.8 19.5 16.6 17.2 14.6 15.230.0 21.7 22.5 17.8 18.5 15.7 16.2 13.8 14.332.0 20.6 21.3 16.9 17.5 14.8 15.3 13.0 13.534.0 19.6 20.2 21.2/34.5 16.1 16.6 14.0 14.5 12.3 12.736.0 18.7 19.3 20.9 15.3 15.8 17.4/36.1 13.4 13.8 14.7/37.6 11.6 12.038.0 17.9 18.4 20.0 14.6 15.1 16.7 12.7 13.1 14.6 11.1 11.4 12.3/39.140.0 17.2 17.6 18.5 14.0 14.4 15.9 12.2 12.5 13.8 10.5 10.9 12.142.0 16.0 17.0 17.3 13.5 13.8 15.1 11.7 12.0 13.2 10.1 10.4 11.544.0 14.8 15.8 16.2 14.6/45.9 13.0 13.3 14.5 11.2 11.5 12.6 9.6 9.9 10.946.0 13.6 14.6 15.2 14.6 12.6 12.8 13.9 13.7/47.8 10.8 11.0 12.0 9.2 9.5 10.448.0 12.5 13.4 14.3 13.8 12.2 12.4 13.4 13.7 10.4 10.6 11.5 12.0/49.8 8.9 9.1 9.950.0 11.5 12.4 13.5 13.0 11.9 12.1 12.9 13.1 10.1 10.3 11.1 12.0 8.6 8.8 9.5 9.9/51.752.0 10.4 11.3 12.8 12.3 10.9 11.7 12.2 12.4 9.8 10.0 10.7 11.5 8.3 8.5 9.1 9.954.0 9.9/52.9 10.2 12.2 11.7 9.9 10.8 11.6 11.7 9.6 9.8 10.3 11.1 8.1 8.2 8.8 9.556.0 10.0/54.2 11.7 11.1 8.9/55.9 9.8 11.1 11.1 9.4 9.6 10.0 10.7 7.9 8.0 8.5 9.258.0 11.1 10.6 8.9/57.1 10.6 10.6 8.5 9.3 9.8 10.0 7.8 7.9 8.3 8.860.0 10.9/58.4 10.1 10.2 10.1 8.1/58.8 8.3 9.6 9.7 7.7 7.8 8.0 8.562.0 9.7 9.9/61.3 9.6 8.2/60.1 9.4 9.4 7.6/61.8 7.7 7.9 8.364.0 9.6/62.3 9.2 9.1 9.0 7.6/63.0 7.8 8.166.0 8.9/65.3 9.0/64.3 8.6 7.7 7.968.0 8.2 7.6/67.2 7.870.0 8.1/68.2 7.672.0 7.4/71.2

    tower 24.40m57.90 60.9551.80 54.85

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 7/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 6 6 4 3 6 6 4 3 5 5 3 2 5 5 3 2 4 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 69.4/9.610.0 69.4 69.2/10.411.0 69.2 69.0 66.9/11.312.0 65.8 69.4 68.5 65.1 59.7/12.213.0 58.3 69.2 66.9 69.0/13.1 62.5 58.0 53.0/13.114.0 52.4 61.7 60.6 66.9 60.1 62.0/14.1 55.8 51.515.0 47.4 55.3 55.0 63.8 57.3 60.1 53.9 56.7/15.2 49.816.0 43.1 49.9 50.2 57.8 55.8 57.9 52.0 53.9 48.2 48.9/16.218.0 38.3 41.4 42.4 48.3 48.7 53.9 48.8 50.3 45.3 46.620.0 32.2 36.9 46.6/20.1 38.5 41.0 43.0/21.6 44.6 47.1 45.9 47.2 42.8 44.022.0 26.9 31.1 42.5 33.1 37.4 42.1 38.8 40.8 39.6/23.1 42.1 43.9 40.6 41.624.0 24.0/23.6 25.9 38.2 28.4 32.2 37.9 33.9 37.8 37.8 37.2 40.2 36.3/24.6 37.1 39.526.0 24.7/25.0 34.6 30.1/27.5 25.4 27.6 34.3 29.6 33.2 34.2 33.0 36.3 33.9 33.1 36.2 33.3/26.228.0 29.3 29.5 24.0/26.5 24.4 31.3 27.3/29.5 25.6 29.0 31.2 29.4 32.3 30.9 29.7 32.4 31.030.0 24.7/29.7 27.0 28.8 26.8 23.8/29.5 24.9 28.6 25.1/31.5 26.1 28.8 28.4 26.7 29.1 28.432.0 25.0 26.2 24.7 24.5/30.9 26.5 24.7 22.8 25.6 26.2 23.0/33.4 23.9 26.2 26.234.0 23.2 24.5/32.7 22.9 24.6 22.9 22.1/32.4 22.5/33.9 24.3 22.5 21.2 23.5 24.3 21.3/35.436.0 23.0/34.2 21.4 23.0/35.6 21.3 22.6 21.0 19.3/35.4 20.8 22.6 20.938.0 20.5/37.1 19.9 21.2 19.6 19.7/36.8 21.1 19.540.0 18.7 20.8/38.5 18.4 19.8 18.442.0 18.6/40.1 17.3 18.8/41.5 17.344.0 16.8/43.0 16.346.0 15.0/45.9

    tower 27.45m21.35 24.40 27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 8/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 3 3 3 2 3 3 3 2 3 3 2 2 2 2 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 46.1 39.8/14.915.0 45.3 39.8 34.1/15.816.0 44.5 44.3/17.3 39.1 34.0 29.5/16.7 25.8/17.618.0 42.3 43.5 37.9 37.8/18.3 32.8 32.5/19.3 29.0 25.720.0 40.0 41.1 36.8 37.0 31.9 32.2 28.1 28.0/20.4 24.9 24.6/21.422.0 38.0 38.9 35.3 36.0 31.2 31.2 27.4 27.5 24.2 24.424.0 36.2 37.0 33.7 34.4 30.6 30.5 26.8 26.8 23.6 23.626.0 32.9 35.3 30.9/27.7 32.3 32.9 29.9 29.8 26.3 26.2 23.1 23.028.0 29.6 32.2 30.7 29.4 31.5 28.8/29.2 28.7 29.2 25.2 25.7 21.8 22.530.0 26.7 29.0 28.1 26.6 28.8 27.8 26.8 28.1 27.1/30.7 23.7 24.8 20.4 21.432.0 24.1 26.2 25.9 24.1 26.1 25.6 24.4 26.3 25.7 22.3 23.3 24.5/32.3 19.1 20.0 21.2/33.834.0 21.8 23.7 24.0 21.9 23.7 23.7 22.2 24.0 23.8 21.0 21.9 23.5 18.0 18.8 21.236.0 19.5 21.4 22.3 19.6/37.3 19.9 21.6 22.0 20.3 21.9 22.1 20.0 20.7 22.1 17.0 17.7 20.538.0 17.3 19.3 20.8 19.2 18.0 19.6 20.6 18.0/39.3 18.5 20.1 20.6 18.6 19.7 20.4 16.1 16.7 19.240.0 16.9/38.3 17.5/39.7 19.5 18.0 16.1 17.8 19.2 17.7 16.9 18.3 19.3 17.0/41.3 17.1 18.4 18.9 15.3 15.9 18.142.0 18.4 16.9 14.8/41.3 15.9 18.1 16.6 15.3 16.7 18.1 16.7 15.6 16.9 17.6 15.7/43.2 14.7 15.1 17.144.0 17.3 15.9 15.2/42.7 17.0 15.6 13.6 15.1 17.1 15.7 14.2 15.5 16.5 15.4 14.1 14.5 16.2 14.6/45.246.0 17.2/44.4 15.0 16.1 14.7 13.4/44.2 13.8/45.6 16.1 14.8 12.8 14.1 15.5 14.5 13.3 14.0 15.2 14.348.0 14.2 15.4/47.4 13.9 15.2 14.0 12.0/47.1 12.7 14.7 13.7 12.1 13.2 14.3 13.550.0 13.8/48.9 13.2 14.5 13.2 12.2/48.6 14.1 13.0 10.8 12.0 13.6 12.852.0 12.6/51.8 14.4/50.3 12.5 13.6 12.3 10.7/50.1 11.1/51.5 13.0 12.154.0 11.9 13.2/53.3 11.7 12.5 11.556.0 11.6/54.8 11.1 12.0 10.958.0 10.5/57.7 11.9/56.2 10.460.0 9.962.0 9.8/60.7

    48.7542.65 45.70tower 27.45m

    36.55 39.60

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 9/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 25.1/18.5 21.5/19.420.0 24.7 21.4 19.2/20.2 17.0/21.122.0 24.1 23.8/22.5 20.9 20.6/23.5 18.8 16.924.0 23.5 23.5 20.4 20.5 18.3 18.2/24.5 16.5 16.2/25.626.0 23.1 23.0 20.0 20.0 17.7 17.9 15.6 16.128.0 22.8 22.6 18.9 19.6 16.6 17.4 14.7 15.330.0 21.8 22.2 17.8 18.6 15.7 16.3 13.8 14.432.0 20.6 21.4 16.9 17.6 14.8 15.4 13.0 13.634.0 19.6 20.3 20.9/35.3 16.1 16.7 14.1 14.6 12.3 12.836.0 18.7 19.4 20.7 15.3 15.9 17.5/36.8 13.4 13.9 11.6 12.138.0 17.9 18.5 20.4 14.7 15.1 17.0 12.7 13.2 14.6/38.4 11.1 11.5 12.3/39.940.0 17.2 17.7 19.1 14.0 14.5 16.1 12.2 12.6 14.1 10.5 10.9 12.342.0 16.0 17.0 17.9 13.5 13.9 15.4 11.7 12.0 13.4 10.1 10.4 11.744.0 14.8 15.9 16.8 13.0 13.3 14.7 11.2 11.5 12.8 9.6 9.9 11.146.0 13.7 14.7 15.8 13.5/47.1 12.6 12.9 14.1 10.8 11.1 12.2 9.2 9.5 10.648.0 12.6 13.6 14.9 13.3 12.2 12.5 13.5 12.8/49.1 10.4 10.7 11.7 8.9 9.1 10.150.0 11.5 12.5 14.1 12.6 11.9 12.1 13.0 12.5 10.1 10.3 11.2 12.0/51.1 8.6 8.8 9.752.0 10.4 11.4 13.3 11.9 10.9 11.8 12.6 11.9 9.8 10.0 10.8 11.5 8.3 8.5 9.3 10.0/53.054.0 9.8/53.0 10.3 12.7 11.3 8.9 10.9 12.0 11.2 9.6 9.8 10.4 10.9 8.1 8.2 8.9 9.856.0 10.0/54.5 12.1 10.7 6.9 9.9 11.4 10.6 9.4 9.6 10.1 10.5 7.9 8.0 8.6 9.458.0 11.5 10.2 9.2/57.4 10.9 10.1 8.5 9.4 9.9 9.9 7.8 7.9 8.3 9.060.0 11.2/59.2 9.7 10.5 9.7 8.0/58.9 8.5 9.6 9.4 7.7 7.8 8.1 8.762.0 9.3 9.7 9.2 8.3/60.4 9.5 9.0 7.6/61.9 7.7 7.9 8.464.0 9.0/63.7 9.6/62.1 8.6 9.4 8.3 7.6/63.3 7.8 8.066.0 8.2/66.6 9.3/65.0 8.0 7.7 7.768.0 7.7 7.6 7.470.0 7.6/69.5 7.172.0 6.774.0 6.6/72.4

    51.80 54.85 57.90 60.95tower 27.45m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 10/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 6 6 4 3 6 5 3 2 5 5 3 2 5 4 3 2 4 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 69.3/9.710.0 69.2 69.0/10.611.0 69.0 68.8 63.5/11.412.0 66.4 69.5/12.3 66.2 62.0 56.8/12.313.0 59.0 69.2 63.5 65.3/13.3 59.5 55.4 50.6/13.214.0 53.0 63.7 61.0 63.6 57.2 58.6/14.4 53.4 49.415.0 47.9 56.9 55.3 61.1 55.1 57.4 51.5 52.6/15.4 47.816.0 43.5 51.3 50.7 58.8 53.2 55.3 49.8 51.6 46.2 46.8/16.518.0 38.6 42.4 42.8 49.4 49.1 51.5 46.7 48.2 43.5 44.920.0 32.5 37.8 44.3/20.9 38.9 41.9 42.3 48.0 44.0 45.3 41.1 42.322.0 27.1 31.9 42.0 33.4 38.2 40.4/22.4 39.1 41.5 37.3/23.9 41.6 42.8 39.0 40.024.0 24.0/23.7 26.6 37.5 28.6 32.9 37.3 34.2 38.5 37.2 37.5 39.5 34.4/25.4 37.2 38.126.0 24.6/25.3 34.0 25.7 28.2 33.8 29.8 33.8 33.7 33.3 36.4 33.6 33.4 36.1 32.2/27.028.0 31.1 27.6/28.8 24.0/26.6 25.2 30.8 25.8 29.5 30.7 29.6 32.8 30.4 29.9 32.9 30.530.0 26.1 26.4 24.6/28.2 28.3 25.3/30.8 23.9/29.6 25.5 28.2 26.3 29.3 27.9 26.9 29.6 28.032.0 24.7/30.5 24.3 26.2 24.1 24.4/31.2 26.0 23.1/32.8 23.0 26.0 25.7 24.1 26.6 25.834.0 22.6 24.7/33.4 22.3 24.2 22.1 22.1/32.5 22.7 23.9 21.2/34.7 21.4 23.9 23.936.0 21.4/35.5 20.8 22.5 20.6 22.5/34.1 22.2 20.3 19.3/35.5 21.2 22.2 19.9/36.738.0 19.5 22.1/36.4 19.3 20.8 18.9 19.7/37.1 20.8 19.040.0 19.2/38.4 18.1 19.8/39.3 17.7 19.5 17.842.0 17.4/41.3 16.8 18.4 16.744.0 15.8 18.2/42.3 15.746.0 15.6/44.3 15.048.0 14.5/47.2

    30.5021.35 24.40 27.45tower 30.50m

    33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 11/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 3 3 3 2 3 3 2 2 3 3 2 2 2 2 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 45.6/14.115.0 44.5 39.4 33.6/15.916.0 43.2 42.4/17.5 38.6 33.6 29.2/16.8 25.5/17.718.0 40.7 41.9 37.4 38.0/18.6 32.5 32.1/19.6 28.7 25.420.0 38.5 39.6 35.8 36.7 31.5 31.9 27.8 27.8/20.6 24.6 24.3/21.722.0 36.6 37.5 34.1 34.8 30.8 30.9 27.1 27.3 23.9 24.224.0 34.9 35.7 32.5 33.2 30.1 30.1 26.5 26.5 23.3 23.426.0 33.1 34.1 31.2 31.8 28.9 29.4 26.0 25.9 22.8 22.828.0 29.8 32.6 29.6/28.5 29.5 30.5 27.9 28.3 25.3 25.4 21.9 22.330.0 26.8 29.4 27.6 26.7 29.2 27.6 26.9 27.3 26.1/31.5 23.7 25.0 20.4 21.632.0 24.3 26.6 25.4 24.2 26.4 25.2 24.5 26.4 25.3 22.3 23.4 24.2/33.1 19.2 20.234.0 21.9 24.1 23.5 22.0 24.0 23.3 22.4 24.3 23.4 21.1 22.0 23.1 18.0 18.9 21.0/34.636.0 19.7 21.8 21.9 20.0 21.9 21.6 20.4 22.2 21.8 20.0 20.8 21.5 17.0 17.8 20.638.0 17.4 19.6 20.5 18.2/38.6 18.1 19.9 20.2 18.7 20.3 20.3 18.7 19.8 20.0 16.1 16.8 19.540.0 16.9/38.4 17.3 19.2 17.5 16.2 18.0 18.9 16.8/40.6 17.0 18.6 19.0 17.2 18.6 18.7 15.3 16.0 18.242.0 18.0 16.4 14.8/41.4 16.2 17.7 16.1 15.4 17.0 17.8 15.9/42.6 15.7 17.1 17.5 14.7 15.2 17.044.0 17.0 15.4 15.3/43.0 16.7 15.1 13.7 15.4 16.8 15.2 14.3 15.7 16.5 14.7/44.5 14.1 14.5 16.246.0 16.4/45.2 14.5 15.8 14.3 13.4/44.3 13.8/45.9 15.8 14.3 12.9 14.3 15.5 14.1 13.4 14.0 15.3 13.6/46.548.0 13.8 15.0 13.5 15.0 13.5 12.0/47.2 12.9 14.7 13.3 12.2 13.4 14.4 13.150.0 13.1 14.9/48.2 12.8 14.2 12.8 12.3/48.8 13.9 12.5 10.9 12.2 13.6 12.452.0 13.0/50.2 12.1 13.7/51.1 12.1 13.2 11.9 10.7/50.2 11.1/51.8 12.9 11.754.0 11.7/53.1 11.5 12.6 11.3 12.4 11.156.0 11.0 12.4/54.1 10.7 11.8 10.558.0 10.9/56.1 10.2 11.5/57.0 10.060.0 10.0/59.0 9.562.0 9.1

    36.55 39.60 42.65tower 30.50m

    45.70 48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

    PeterText

  • EC404025 (P- 12/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 24.8/18.6 21.3/19.520.0 24.4 21.2 19.0/20.4 16.8/21.222.0 23.8 23.6/22.7 20.6 20.3/23.8 18.6 16.724.0 23.2 23.3 20.2 20.3 18.1 18.0/24.8 16.3 15.9/25.926.0 22.8 22.8 19.8 19.8 17.7 17.8 15.7 15.928.0 22.5 22.3 18.9 19.4 16.7 17.4 14.7 15.530.0 21.8 21.9 17.9 18.7 15.7 16.5 13.8 14.532.0 20.7 21.5 16.9 17.7 14.8 15.5 13.0 13.634.0 19.6 20.4 16.1 16.8 14.1 14.7 12.3 12.936.0 18.7 19.4 20.6/36.1 15.3 15.9 17.5/37.6 13.4 13.9 11.7 12.238.0 17.9 18.6 19.6 14.7 15.2 17.3 12.7 13.2 14.6/39.2 11.1 11.540.0 17.2 17.8 18.3 14.0 14.5 16.4 12.2 12.6 14.4 10.5 11.0 12.2/40.742.0 16.1 17.1 17.2 13.5 13.9 15.6 11.7 12.1 13.7 10.1 10.4 11.944.0 14.9 16.1 16.1 13.0 13.4 14.9 11.2 11.6 13.0 9.6 10.0 11.346.0 13.7 14.9 15.2 12.6 12.9 14.3 10.8 11.1 12.4 9.2 9.5 10.848.0 12.6 13.7 14.3 12.5/48.4 12.2 12.5 13.7 10.4 10.7 11.9 8.9 9.2 10.350.0 11.6 12.6 13.5 12.1 11.9 12.1 13.2 11.7/50.4 10.1 10.3 11.4 8.6 8.8 9.852.0 10.5 11.6 12.8 11.5 11.0 11.8 12.7 11.5 9.8 10.0 10.9 11.2/52.3 8.3 8.5 9.454.0 9.8/53.1 10.5 12.1 10.9 10.1 11.0 12.3 10.8 9.6 9.8 10.6 10.7 8.1 8.3 9.0 9.9/54.356.0 10.1/54.5 11.5 10.3 9.0 10.1 11.9 10.3 9.4 9.6 10.2 10.1 7.9 8.0 8.7 9.658.0 11.0 9.8 8.9/56.1 9.3/57.7 11.3 9.7 8.6 9.4 9.9 9.6 7.7 7.9 8.4 9.260.0 10.0/59.9 9.3 10.9 9.3 8.2/59.0 8.6 9.7 9.1 7.5 7.8 8.2 8.862.0 8.9 10.0 8.8 8.3/60.6 9.5 8.6 7.3 7.7 8.0 8.464.0 8.5 9.7/62.9 8.4 9.4 8.2 7.6/63.6 7.8 8.066.0 8.3/64.9 8.0 9.3/65.8 7.8 7.7 7.768.0 7.7/67.8 7.5 7.6 7.370.0 7.1 7.5/68.8 6.972.0 6.9/70.8 6.674.0 6.4/73.7

    tower 30.50m57.90 60.9551.80 54.85

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 13/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 6 6 4 2 5 5 3 2 5 5 3 2 5 4 3 2 4 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 69.1/9.810.0 69.0 66.4/10.711.0 68.1 65.6 59.9/11.612.0 67.2 68.6/12.6 62.8 59.0 54.2/12.413.0 59.8 67.5 60.3 61.5/13.6 56.7 53.0 49.0/13.314.0 53.6 64.7 57.9 60.6 54.5 55.2/14.7 51.0 47.415.0 48.4 58.6 55.8 58.2 52.6 54.8 49.2 49.8/15.7 45.916.0 43.9 52.7 51.2 56.0 50.8 52.8 47.6 49.4 44.4 44.8/16.718.0 39.0 43.4 43.2 50.5 47.5 49.2 44.6 46.2 41.8 43.220.0 32.8 38.7 41.2/21.7 39.2 42.8 42.6 46.2 42.1 43.4 39.5 40.722.0 27.4 32.6 40.7 33.7 38.9 37.7/23.2 39.4 42.3 39.8 41.0 37.5 38.524.0 24.0/23.8 27.3 37.2 28.9 33.6 36.5 34.4 39.7 35.1/24.7 37.6 38.8 35.7 36.626.0 24.4/25.6 33.5 26.0 28.8 33.2 30.1 34.4 33.1 33.3 35.8 32.4/26.2 33.4 34.9 30.2/27.828.0 30.5 24.1/26.7 25.9 30.3 26.0 30.1 30.2 29.6 33.0 29.9 29.9 32.9 29.730.0 28.2 25.2/30.1 24.5/28.5 27.8 23.9/29.7 26.0 27.7 26.3 29.6 27.4 26.9 29.9 27.532.0 24.7/31.3 23.6 25.7 23.2/32.1 24.6/31.4 25.6 23.0 26.3 25.3 24.1 26.8 25.334.0 21.9 23.9 21.5 23.7 21.5 22.0/32.6 23.0 23.4 21.4 24.1 23.536.0 20.4 23.7/34.2 20.1 22.1 20.0 22.3/34.4 21.8 19.7 19.2/35.6 21.5 21.838.0 19.9/36.7 18.8 21.2/37.2 18.6 20.4 18.3 19.8/37.3 20.4 18.440.0 17.9/39.7 17.5 19.1 17.2 19.1 17.242.0 16.4 19.0/40.1 16.1 18.0 16.144.0 16.1/42.6 15.2 17.4/43.1 15.246.0 14.5/45.6 14.348.0 13.650.0 13.4/48.5

    tower 33.50m21.35 24.40 27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 14/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 3 3 2 2 3 3 2 2 3 3 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 43.9/14.215.0 42.9 39.1/15.116.0 41.6 40.7/17.8 38.3 33.3 28.8/16.9 25.2/17.818.0 39.2 40.5 36.4 36.5/18.8 32.2 31.7/19.9 28.4 25.220.0 37.1 38.2 34.5 35.5 31.3 31.7 27.6 27.5/20.9 24.422.0 35.2 36.2 32.9 33.7 30.4 30.7 26.8 27.1 23.7 24.024.0 33.6 34.4 31.4 32.1 29.1 29.7 26.2 26.3 23.1 23.326.0 32.2 32.8 30.1 30.7 28.0 28.5 25.7 25.7 22.6 22.728.0 29.8 31.5 27.9/29.3 28.9 29.4 27.0 27.4 24.9 25.2 21.9 22.230.0 26.9 29.7 27.3 26.7 28.3 26.0/30.8 26.1 26.4 23.7 24.4 20.5 21.732.0 24.3 26.8 25.0 24.2 26.7 24.7 24.5 25.5 24.5/32.3 22.3 23.6 23.0/33.8 19.2 20.334.0 21.9 24.3 23.2 22.0 24.2 22.9 22.4 24.5 23.0 21.1 22.2 22.9 18.0 19.0 20.7/35.436.0 19.7 21.9 21.5 20.0 22.0 21.2 20.4 22.4 21.3 20.0 20.9 21.1 17.0 17.9 20.638.0 17.4 19.7 20.1 16.9/39.9 18.1 20.0 19.8 18.6 20.5 19.9 18.7 19.9 19.6 16.1 16.9 19.440.0 16.8/38.5 17.5 18.8 16.9 16.2 18.1 18.5 15.6/41.9 17.0 18.7 18.6 17.1 18.7 18.3 15.3 16.0 18.242.0 17.1/40.3 17.7 15.9 14.9/41.5 16.3 17.4 15.6 15.4 17.1 17.4 14.7/43.8 15.7 17.2 17.2 14.7 15.3 17.044.0 16.7 14.9 15.2/43.2 16.4 14.6 13.7 15.5 16.4 14.7 14.3 15.8 16.1 13.5/45.8 14.1 14.6 16.046.0 15.8 14.0 15.4 13.8 13.3/44.4 13.8 15.5 13.9 12.9 14.4 15.2 13.5 13.3 14.0 15.0 12.5/47.848.0 13.3 14.6 13.0 13.6/46.2 14.6 13.1 11.9/47.4 13.0 14.4 12.7 12.1 13.4 14.2 12.550.0 12.6 14.3/49.0 12.3 13.9 12.4 12.2/49.1 13.6 12.1 10.9 12.2 13.4 11.852.0 12.1/51.5 11.7 13.1/51.9 11.7 12.9 11.4 10.7/50.3 11.0 12.7 11.254.0 11.1 11.1 12.3 10.8 12.1 10.656.0 10.9/54.4 10.6 12.1/54.8 10.3 11.5 10.158.0 10.1/57.4 9.8 11.0/57.8 9.660.0 9.3 9.162.0 9.2/60.3 8.764.0 8.4/63.2

    48.7542.65 45.70tower 33.50m

    36.55 39.60

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 15/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 24.4/18.7 21.1/19.620.0 24.1 21.0 18.7/20.5 16.6/21.422.0 23.5 23.3/23.0 20.5 18.4 16.524.0 23.0 23.1 20.0 20.1 18.0 17.7/25.1 16.126.0 22.6 22.6 19.6 19.6 17.6 17.6 15.7 16.3/26.128.0 22.3 22.1 18.9 19.2 16.7 17.2 14.7 15.530.0 21.8 21.8 17.9 18.8 15.7 16.6 13.8 14.632.0 20.7 21.5 17.0 17.8 14.9 15.6 13.0 13.734.0 19.7 20.5 16.1 16.9 14.1 14.8 12.3 12.936.0 18.7 19.5 20.1/36.9 15.4 16.0 13.4 14.0 11.7 12.238.0 17.9 18.6 19.2 14.7 15.3 17.5/38.4 12.8 13.3 14.7/39.9 11.1 11.640.0 17.2 17.8 17.9 14.1 14.6 16.7 12.2 12.7 14.7 10.5 11.0 12.3/41.542.0 16.1 17.1 16.8 13.5 14.0 15.9 11.7 12.1 13.9 10.1 10.5 12.244.0 14.9 16.2 15.8 13.0 13.4 15.2 11.2 11.6 13.2 9.6 10.0 11.546.0 13.7 14.9 14.8 12.6 12.9 14.5 10.8 11.1 12.6 9.2 9.6 10.948.0 12.6 13.8 14.0 11.6/49.7 12.2 12.5 13.9 10.4 10.7 12.1 8.9 9.2 10.450.0 11.5 12.7 13.2 11.6 11.9 12.1 13.1 11.0/51.7 10.1 10.4 11.5 8.6 8.8 10.052.0 10.4 11.6 12.5 11.0 11.0 11.8 12.5 11.0 9.8 10.0 11.1 10.4/53.6 8.3 8.5 9.554.0 9.7/53.2 10.6 11.9 10.4 10.0 11.1 11.9 10.4 9.6 9.8 10.7 10.3 8.1 8.3 9.1 9.8/55.656.0 10.1/55.0 11.3 9.8 9.0 10.1 11.3 9.9 9.4 9.6 10.3 9.7 7.9 8.0 8.8 9.858.0 10.7 9.3 8.9/56.2 9.1/57.9 10.7 9.4 8.6 9.4 10.0 9.2 7.7 7.8 8.5 9.160.0 10.3 8.9 10.2 8.9 8.1/59.1 8.7 9.8 8.7 7.5 7.7 8.2 8.562.0 10.2/60.7 8.5 9.8 8.4 8.3/60.9 9.5 8.3 7.2 7.6 8.0 8.164.0 8.1 9.4/63.7 8.0 9.1 7.9 7.1/62.1 7.5/63.8 7.8 7.766.0 7.8 7.6 8.7 7.5 7.7 7.368.0 7.7/66.2 7.3 8.6/66.6 7.1 7.6 6.970.0 7.0/69.1 6.8 7.5/69.6 6.672.0 6.5 6.374.0 6.4/72.1 6.076.0 5.9/75.0

    51.80 54.85 57.90 60.95tower 33.50m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 16/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 5 5 3 2 5 5 3 2 5 4 3 2 4 4 3 2 4 4 3 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    9.0 67.5/9.910.0 67.5 62.1/10.811.0 65.8 61.6 56.2/11.712.0 62.8 63.8/12.8 59.0 55.6 51.0/12.513.0 60.2 63.3 56.6 57.2/13.9 53.4 50.1 49.2/13.414.0 54.2 60.6 54.4 57.0 51.4 51.8/14.9 48.2 47.115.0 48.9 58.2 52.4 54.7 49.5 51.7 46.5 43.616.0 44.4 54.1 50.6 52.7 47.8 49.8 45.0 46.8 42.2 42.3/17.018.0 39.4 44.5 43.5 49.1 44.8 46.5 42.2 43.7 39.7 41.120.0 33.1 39.5 39.5 43.7 42.2 43.6 39.8 41.1 37.5 38.722.0 27.7 33.3 38.6/22.4 33.9 39.7 39.7 41.2 37.7 38.8 35.6 36.624.0 24.0/23.9 28.0 36.0 29.1 34.2 35.3 34.7 38.7 32.8/25.5 35.9 36.8 33.9 34.826.0 24.7/25.8 32.8 26.2 29.4 32.6 30.3 35.0 32.2 33.6 35.1 30.4/27.0 32.5 33.228.0 29.9 23.8/26.9 24.8 29.7 26.2 30.6 29.6 29.9 32.6 29.2 30.1 31.8 28.5/28.530.0 27.5 23.2/31.4 24.4/28.8 27.2 23.9/29.8 26.6 27.2 26.5 30.1 27.0 27.1 30.2 26.932.0 24.9 22.7 25.1 21.2/33.4 24.5/31.7 25.1 23.2 26.7 24.7 24.3 27.3 24.834.0 24.6/32.1 21.0 23.3 20.8 23.2 19.7/35.3 22.0/32.7 23.5 22.9 21.6 24.5 22.936.0 19.5 22.4/35.0 19.3 21.6 19.3 22.5/34.6 21.3 17.9/37.3 19.3/35.7 21.8 21.338.0 18.4 18.0 20.3 18.0 19.9 17.6 19.6/37.6 20.0 17.1/39.240.0 17.0 16.8 18.7 16.5 18.7 16.642.0 16.5/41.0 15.8 18.1/40.9 15.5 17.6 15.544.0 14.8/43.9 14.6 16.5/43.9 14.646.0 13.8 13.848.0 13.4/46.9 13.050.0 12.4/49.8

    30.5021.35 24.40 27.45tower 36.55m

    33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 17/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 3 2 2 3 3 2 2 3 3 2 2 3 3 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 41.8/14.315.0 40.9 37.7/15.216.0 39.6 36.9 32.9/16.1 28.5/17.0 25.0/17.918.0 37.3 38.6 34.8 34.8/19.1 31.8 28.1 25.020.0 35.3 36.4 32.9 34.0 30.6 31.2/20.1 27.3 27.2/21.2 24.222.0 33.5 34.4 31.3 32.2 29.2 29.9 26.5 26.9 23.4 23.6/22.224.0 32.0 32.8 29.9 30.6 27.9 28.5 25.8 26.1 22.9 23.126.0 30.6 31.3 28.7 29.3 26.8 27.3 24.8 25.3 22.4 22.528.0 29.4 30.0 27.6 28.0 25.8 26.2 23.9 24.3 22.0 21.930.0 27.0 28.8 26.2/30.1 26.6 27.0 24.5/31.6 24.9 25.3 23.1 23.4 20.5 21.532.0 24.4 27.2 24.7 24.4 26.0 24.2 24.2 24.4 23.3/33.1 22.4 22.7 19.2 20.534.0 22.0 24.6 22.7 22.1 24.5 22.5 22.5 23.7 22.4 21.1 22.0 21.7/34.6 18.1 19.236.0 19.8 22.3 21.1 20.1 22.3 20.8 20.6 22.7 20.9 20.0 21.1 20.5 17.0 18.0 20.1/36.238.0 17.6 20.0 19.6 18.2 20.3 19.4 18.8 20.7 19.5 18.8 20.0 19.2 16.1 17.0 19.140.0 16.9/38.6 17.8 18.4 15.2/41.2 16.3 18.4 18.1 17.1 19.0 18.2 17.2 19.0 17.9 15.3 16.1 17.842.0 17.2/40.5 17.3 15.2 14.7/41.6 16.6 17.0 14.3/43.2 15.5 17.3 17.1 15.8 17.4 16.8 14.7 15.3 16.644.0 16.3 14.3 15.2/43.5 16.0 14.0 13.8 15.7 16.1 13.6/45.1 14.4 16.0 15.8 14.1 14.6 15.646.0 15.4 13.5 15.1 13.2 13.3/44.5 14.1 15.1 13.3 13.0 14.6 14.9 12.5/47.1 13.4 14.1 14.748.0 14.9/46.8 12.7 14.3 12.4 13.7/46.4 14.3 12.5 11.9/47.5 13.2 14.0 12.2 12.2 13.6 13.8 11.6/49.050.0 12.1 13.5/49.7 11.8 13.6 11.9 12.2/49.4 13.3 11.5 11.0 12.4 13.1 11.352.0 11.5 11.1 12.9 11.2 12.6 10.8 10.7/50.4 11.2 12.4 10.754.0 11.3/52.8 10.6 12.6/52.7 10.6 12.0 10.3 11.0/52.3 11.8 10.156.0 10.0/55.7 10.1 11.3/55.6 9.8 11.2 9.558.0 9.6 9.3 10.7 9.160.0 9.4/58.6 8.9 10.5/58.6 8.662.0 8.5/61.6 8.364.0 7.966.0 7.8/64.5

    36.55 39.60 42.65tower 36.55m

    45.70 48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 18/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 24.2/18.8 20.8/19.720.0 23.9 20.8 18.4/20.6 16.4/21.522.0 23.3 23.1/23.3 20.2 18.2 16.324.0 22.7 22.9 19.8 19.9/24.3 17.8 17.6/25.3 15.926.0 22.3 22.3 19.4 19.5 17.4 17.5 15.6 15.7/26.428.0 22.0 21.9 19.0 19.0 16.7 17.1 14.7 15.330.0 21.4 21.5 17.9 18.7 15.8 16.7 13.9 14.732.0 20.7 20.9 17.0 17.9 14.9 15.7 13.1 13.834.0 19.7 20.3 16.1 16.9 14.1 14.9 12.3 13.036.0 18.8 19.6 19.1/37.7 15.4 16.1 13.4 14.1 11.7 12.338.0 17.9 18.7 18.9 14.7 15.3 17.3/39.2 12.8 13.4 11.1 11.640.0 17.2 17.9 17.6 14.1 14.7 17.1 12.2 12.7 14.7/40.7 10.5 11.142.0 16.2 17.2 16.4 13.5 14.0 16.2 11.7 12.2 14.2 10.1 10.5 12.2/42.344.0 14.9 16.3 15.4 13.0 13.5 15.1 11.2 11.6 13.5 9.6 10.0 11.746.0 13.8 15.1 14.5 12.6 13.0 14.5 10.8 11.2 12.8 9.2 9.6 11.148.0 12.7 13.9 13.7 12.2 12.5 13.7 10.4 10.8 12.2 8.9 9.2 10.650.0 11.6 12.8 12.9 10.8/51.0 11.8 12.2 13.0 10.1 10.4 11.7 8.6 8.9 10.152.0 10.5 11.8 12.2 10.5 11.1 11.8 12.2 10.3/53.0 9.8 10.1 11.2 8.3 8.5 9.754.0 9.7/53.3 10.7 11.6 9.9 10.1 11.2 11.6 10.0 9.6 9.8 10.8 9.5/54.9 8.0 8.3 9.356.0 9.9/55.3 11.0 9.3 9.1 10.3 11.0 9.4 9.4 9.6 10.3 9.3 7.9 8.0 8.9 8.8/56.958.0 10.5 8.9 8.9/56.3 9.3 10.5 8.9 8.6 9.4 9.9 8.8 7.7 7.8 8.6 8.660.0 10.0 8.4 9.2/58.2 10.0 8.5 8.1/59.2 8.8 9.6 8.3 7.6 7.7 8.3 8.162.0 9.6/61.5 8.0 9.5 8.0 8.4/61.1 9.3 7.9 7.3 7.6 8.1 7.764.0 7.6 9.1 7.6 8.9 7.5 7.2/62.2 7.5 7.9 7.366.0 7.4 9.0/64.5 7.3 8.5 7.1 7.4/64.1 7.7 6.968.0 7.1/67.5 6.9 8.2/67.4 6.7 7.6 6.670.0 6.6 6.4 7.5 6.272.0 6.5/70.4 6.1 7.4/70.4 5.974.0 5.9/73.4 5.776.0 5.478.0 5.3/76.3

    tower 36.55m57.90 60.9551.80 54.85

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 19/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 5 5 3 2 5 4 3 2 4 4 3 2 4 4 3 2 4 3 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    10.0 64.1 57.8/10.911.0 61.2 57.6 52.6/11.812.0 58.5 55.2 52.2 47.7/12.713.0 56.1 58.5/13.1 52.9 50.1 47.2 43.4/13.514.0 54.0 56.6 50.9 53.0/14.1 48.2 45.4 42.715.0 49.4 54.4 49.0 51.3 46.5 48.4/15.2 43.8 41.216.0 44.8 52.4 47.3 49.4 44.9 46.9 42.3 43.6/16.2 39.9 39.7/17.318.0 39.7 45.6 43.9 46.0 42.1 43.7 39.7 41.3 37.5 38.920.0 33.4 40.5 39.8 43.2 39.6 41.0 37.4 38.7 35.4 36.622.0 28.0 34.1 36.1/23.2 34.2 40.5 37.5 38.7 35.5 36.6 33.6 34.624.0 24.1 28.7 34.8 29.4 34.9 32.8/24.8 35.8 36.7 33.8 34.7 32.1 32.926.0 24.9 32.1 26.5 30.0 31.5 30.5 35.0 30.6/26.3 32.3 33.1 28.5/27.8 30.7 31.428.0 24.5/26.1 29.4 23.8/27.0 25.5 29.2 26.4 31.2 28.9 29.9 31.6 28.3 29.5 30.1 26.9/29.330.0 27.0 24.6/29.0 26.7 23.9/29.9 27.1 26.5 26.5 29.9 26.3 27.1 28.9 26.232.0 24.9 21.3/32.7 24.6 24.4 24.6 23.2 27.0 24.4 24.3 27.5 24.334.0 23.9/32.9 20.3 22.8 19.5/34.7 22.8 21.8/32.8 23.8 22.5 21.6 24.7 22.536.0 18.9 21.2/35.8 18.6 21.2 18.1/36.6 22.3/34.9 20.9 19.1/35.8 22.0 21.038.0 17.6 17.4 19.8 17.3 19.5 16.6/38.6 19.4/37.9 19.640.0 16.8/39.3 16.3 19.3/38.8 16.2 18.3 15.9 18.3 18.7/40.542.0 15.3 15.2 17.2/41.7 14.9 17.2 15.044.0 15.1/42.3 14.3 14.0 16.2 14.146.0 13.8/45.2 13.2 16.0/44.6 13.348.0 12.5 12.550.0 12.4/48.2 11.952.0 11.5/51.1

    tower 39.60m21.35 24.40 27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

    Peter

  • EC404025 (P- 20/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 2 3 3 2 1 3 3 2 1 3 2 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 39.5/14.415.0 38.8 35.8/15.316.0 37.6 35.1 32.2/16.2 28.1/17.118.0 35.4 36.2/18.3 33.1 32.9/19.4 30.8 27.8 24.720.0 33.4 34.6 31.3 32.4 29.2 29.6/20.4 26.9 27.0/21.4 23.922.0 31.8 32.7 29.8 30.6 27.9 28.6 25.9 26.6 23.2 23.0/22.524.0 30.3 31.1 28.4 29.1 26.7 27.3 24.8 25.3 22.6 22.926.0 29.0 29.6 27.2 27.8 25.6 26.1 23.8 24.2 22.0 22.228.0 27.8 28.4 26.1 26.6 24.6 25.0 22.9 23.3 21.2 21.630.0 26.8 27.3 24.7/30.9 25.2 25.6 23.8 24.1 22.1 22.4 20.5 20.832.0 24.4 26.3 23.9 24.4 24.7 22.9/32.4 23.0 23.3 21.9/33.9 21.4 21.6 19.2 20.134.0 22.0 24.8 22.1 22.1 23.9 21.9 22.3 22.5 21.9 20.8 21.0 20.5/35.4 18.1 19.336.0 19.8 22.4 20.6 20.1 22.5 20.3 20.5 21.9 20.3 20.0 20.4 20.1 17.1 18.1 19.3/36.938.0 17.6 20.2 19.2 18.1 20.4 18.9 18.7 20.9 19.0 18.8 19.8 18.8 16.2 17.1 18.640.0 16.8/38.7 18.0 18.0 16.3 18.5 17.7 17.1 19.1 17.8 17.2 19.1 17.6 15.4 16.2 17.442.0 17.1/40.8 16.9 14.6/42.5 13.7/41.7 16.7 16.6 15.5 17.4 16.7 15.7 17.5 16.4 14.7 15.4 16.244.0 15.9 13.7 15.1/43.7 15.6 13.2/44.5 13.8 15.8 15.7 14.3 16.0 15.4 14.1 14.7 15.346.0 15.0 13.0 14.7 12.6 13.2/44.6 14.2 14.8 12.6/46.4 12.9 14.7 14.5 13.4 14.1 14.448.0 14.2/47.6 12.2 13.9 11.9 13.6/46.7 14.0 12.0 11.7/47.6 13.3 13.7 11.5/48.4 12.2 13.6 13.550.0 11.6 13.2 11.3 13.3 11.3 12.1/49.6 13.0 11.0 10.9 12.5 12.8 10.7/50.352.0 11.0 13.0/50.5 10.7 12.6 10.8 12.3 10.4 10.5/50.5 11.2 12.1 10.254.0 10.4 10.1 12.1/53.5 10.2 11.7 9.8 10.8/52.6 11.5 9.656.0 9.6 9.7 11.1 9.3 10.9 9.158.0 9.4/57.0 9.2 10.9/56.4 8.8 10.4 8.660.0 8.8/59.9 8.4 10.0/59.4 8.262.0 8.0 7.864.0 7.9/62.9 7.466.0 7.2/65.8

    48.7542.65 45.70tower 39.60m

    36.55 39.60

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 21/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 23.9/18.9 20.5/19.820.0 23.6 20.5 18.3/20.7 16.1/21.622.0 23.0 22.7/23.5 20.0 18.0 16.124.0 22.5 22.6 19.5 19.5/24.6 17.5 17.3/25.6 15.726.0 22.0 22.1 19.2 19.3 17.2 17.3 15.4 15.2/26.728.0 21.2 21.5 18.9 18.8 16.7 16.9 14.8 15.130.0 20.4 20.7 18.0 18.5 15.8 16.5 13.9 14.832.0 19.8 20.0 17.0 18.0 14.9 15.8 13.1 13.934.0 19.2 19.4 16.2 17.0 14.1 14.9 12.3 13.136.0 18.7 18.8 15.4 16.2 13.4 14.1 11.7 12.438.0 17.9 18.2 18.0/38.5 14.7 15.4 12.8 13.4 11.1 11.740.0 17.2 17.8 17.3 14.1 14.7 17.0 12.2 12.8 14.7/41.5 10.6 11.142.0 16.2 17.2 16.1 13.5 14.1 16.1 11.7 12.2 14.5 10.1 10.6 12.3/43.044.0 14.9 16.4 15.1 13.0 13.5 15.1 11.2 11.7 13.7 9.6 10.1 12.046.0 13.7 15.2 14.2 12.6 13.0 14.2 10.8 11.2 13.0 9.2 9.6 11.348.0 12.6 14.0 13.3 12.2 12.6 13.4 10.4 10.8 12.4 8.9 9.2 10.850.0 11.6 12.9 12.6 11.8 12.2 12.7 10.1 10.4 11.9 8.5 8.9 10.352.0 10.5 11.8 11.9 9.6/52.3 11.0 11.9 12.0 9.8 10.1 11.4 8.3 8.6 9.854.0 9.6/53.5 10.8 11.3 9.2 10.1 11.3 11.3 9.1/54.3 9.6 9.8 11.0 8.0 8.3 9.456.0 10.0/55.5 10.7 8.7 9.1 10.3 10.7 8.8 9.4 9.6 10.6 8.8/56.2 7.8 8.0 9.058.0 10.2 8.2 8.9/56.4 9.3 10.2 8.3 8.6 9.4 10.0 8.4 7.7 7.8 8.7 8.4/58.260.0 9.7 7.8 9.0/58.5 9.7 7.9 8.0/59.3 8.8 9.5 7.9 7.6 7.7 8.4 7.762.0 9.3 7.4 9.2 7.5 8.3/61.4 9.1 7.5 7.3 7.6 8.1 7.364.0 9.2/62.3 7.0 8.8 7.1 8.6 7.1 7.2/62.3 7.5 7.9 6.966.0 6.7 8.6/65.3 6.7 8.2 6.7 7.4/64.4 7.8 6.668.0 6.5/68.8 6.4 7.9 6.4 7.6 6.270.0 6.1 7.8/68.2 6.1 7.5 5.972.0 5.9/71.7 5.8 7.4/71.1 5.674.0 5.5 5.376.0 5.3/74.7 5.178.0 4.9/77.6

    51.80 54.85 57.90 60.95tower 39.60m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 22/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 5 5 3 2 4 4 3 2 4 4 3 2 4 4 2 2 4 3 2 2Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    10.0 59.4/10.111.0 57.0 53.9 49.2/11.912.0 54.5 51.6 49.0 44.7/12.813.0 52.3 54.1/13.4 49.5 47.0 44.4 40.8/13.714.0 50.3 52.9 47.5 49.1/14.4 45.2 42.8 40.415.0 48.4 50.8 45.8 48.1 43.6 44.8/15.5 41.2 39.016.0 45.3 48.9 44.2 46.3 42.1 44.1 39.8 40.7/16.5 37.7 37.3/17.518.0 40.1 45.5 41.4 43.1 39.4 41.0 37.3 38.9 35.4 36.820.0 33.7 41.4 39.0 40.4 37.1 38.5 35.2 36.5 33.4 34.622.0 28.2 34.9 34.5 38.1 35.2 36.3 33.3 34.4 31.7 32.724.0 24.4 29.4 33.6 29.6 35.6 31.0/25.5 33.5 34.4 31.7 32.6 30.2 31.026.0 24.1/24.1 25.7 31.0 26.8 30.6 30.4 30.7 32.8 28.7/27.1 30.3 31.0 28.9 29.628.0 24.8/26.3 28.8 23.8/27.1 26.1 28.2 26.6 31.5 27.9 29.1 29.7 26.4/28.6 27.8 28.330.0 26.4 24.5/29.3 26.2 23.9 27.6 26.0 26.6 28.6 25.3 26.8 27.2 25.3/30.132.0 24.4 24.1 25.1 24.0 23.4 27.4 23.7 24.4 26.3 23.734.0 22.7/33.7 19.5 22.4 17.9/35.9 24.6/32.2 22.2 21.8/33.0 24.2 22.0 21.7 25.0 22.036.0 18.1 20.8 17.9 20.7 16.6/37.9 22.2/35.2 20.3 19.1/35.9 22.4 20.538.0 16.9 20.3/36.6 16.7 19.3 16.6 19.0 15.1/39.9 19.6 19.140.0 15.8 15.6 18.3/39.5 15.5 17.7 15.1 19.4/38.1 17.9 14.4/41.842.0 15.5/40.6 14.6 14.6 16.7 14.3 16.8 14.444.0 13.9/43.6 13.7 16.5/42.5 13.4 15.8 13.546.0 13.0 12.6 15.2/45.4 12.748.0 12.8/46.5 11.9 12.050.0 11.4/49.4 11.352.0 10.854.0 10.7/52.4

    30.5021.35 24.40 27.45tower 42.65m

    33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

    PeterText

  • EC404025 (P-23/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°)8885756588857565888575658885756588857565Reeved lines33213321332132212221Wind(m/sec)Radius(m)1111111111111111111111111111111111111111

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

    36.5539.6042.65tower 42.65m

    45.7048.75

    37-161-024.0ER1S0503Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

    Peter

  • EC404025 (P- 24/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 23.6/19.0 20.5/19.920.0 23.3 20.5 18.0/20.8 15.8/21.722.0 22.7 22.5/23.8 20.0 17.8 15.824.0 21.8 22.4 19.5 19.5/24.8 17.4 17.3/25.9 15.626.0 21.0 21.4 19.2 19.2 17.0 17.1 15.2 15.1/26.928.0 20.2 20.5 18.9 18.9 16.7 16.7 14.8 15.030.0 19.5 19.7 18.0 18.0 15.8 16.4 13.9 14.732.0 18.8 19.0 17.0 17.0 14.9 15.9 13.1 14.034.0 18.2 18.4 16.2 16.2 14.1 15.0 12.4 13.236.0 17.7 17.8 15.4 15.4 13.4 14.2 11.7 12.438.0 17.2 17.3 16.9/39.3 14.7 14.7 12.8 13.5 11.1 11.840.0 16.8 16.8 16.6 14.1 14.1 16.2/40.8 12.2 12.8 10.6 11.242.0 16.2 16.4 15.7 13.5 13.5 15.8 11.7 12.3 14.6/42.3 10.1 10.6 12.2/43.844.0 14.9 16.1 14.9 13.0 13.0 14.9 11.2 11.7 14.0 9.6 10.1 12.246.0 13.8 15.3 13.9 12.6 12.6 14.0 10.8 11.2 13.3 9.2 9.7 11.648.0 12.7 14.1 12.9 12.2 12.2 13.1 10.4 10.8 12.6 8.9 9.3 11.050.0 11.6 13.0 12.2 11.8 11.8 12.3 10.1 10.4 12.0 8.5 8.9 10.452.0 10.5 11.9 11.6 9.1/53.7 11.0 11.0 11.6 9.8 10.1 11.2 8.3 8.6 10.054.0 9.6/53.6 10.9 11.0 9.0 10.1 10.1 11.0 8.6/55.5 9.5 9.8 10.8 8.0 8.3 9.556.0 10.0/55.8 10.4 8.4 9.1 9.1 10.4 8.6 9.4 9.6 10.3 7.9/57.5 7.8 8.0 9.158.0 9.9 8.0 8.8/56.5 8.8 9.9 8.1 8.6 9.4 9.7 7.8 7.7 7.8 8.6 7.3/59.560.0 9.4 7.6 8.7/58.7 9.4 7.7 8.0/59.5 9.0 9.2 7.5 7.6 7.7 8.1 7.262.0 9.0 7.2 8.9 7.2 8.6/61.7 8.8 7.1 7.3 7.6 7.8 6.864.0 8.7/63.1 6.8 8.5 6.9 8.3 6.7 7.2/62.4 7.5 7.6 6.566.0 6.5 8.1 6.5 7.9 6.3 7.4/64.6 7.4 6.268.0 6.2 6.2 7.6 6.0 7.3 5.870.0 5.9 5.9 7.4/69.0 5.7 7.2 5.572.0 5.8/70.1 5.6 5.4 7.1/71.9 5.274.0 5.5/73.0 5.2 5.076.0 4.8/75.9 4.778.0 4.580.0 4.4/78.9

    tower 42.65m57.90 60.9551.80 54.85

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 25/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 5 4 3 2 4 4 3 2 4 4 2 2 4 3 2 2 3 3 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    10.0 54.4/10.211.0 52.6 49.6/11.112.0 50.3 47.8 45.6 41.5/12.913.0 48.3 49.6/13.6 45.8 43.7 41.4 38.0/13.814.0 46.4 48.9 44.0 45.1/14.7 42.0 39.9 37.815.0 44.7 47.0 42.4 44.6 40.5 41.7/15.7 38.4 36.516.0 43.1 45.2 40.9 42.9 39.1 41.0 37.1 37.5/16.8 35.3 34.7/17.818.0 40.4 42.1 38.3 39.9 36.6 36.2 34.7 36.2 33.1 34.520.0 34.0 39.5 36.1 37.4 34.4 35.8 32.7 34.0 31.2 32.422.0 28.5 35.7 34.2 35.3 32.6 33.7 30.9 32.0 29.6 30.624.0 24.8 30.1 31.3/24.8 29.8 33.5 31.3 32.0 29.4 30.3 28.2 29.026.0 24.1/24.2 26.5 29.8 27.0 31.3 28.9/26.3 29.8 30.4 26.8/27.9 28.1 28.8 26.9 27.628.0 24.7/26.6 27.6 23.8/27.2 26.7 27.1 26.9 29.2 26.8 27.0 27.6 24.8/29.4 25.9 26.430.0 25.6 24.4/29.6 25.2 24.2 28.1 25.0 26.1 26.5 24.4 25.0 25.4 23.6/30.932.0 23.7 23.5 23.9/30.1 25.7 23.4 23.5 25.6 22.8 24.2 24.5 22.834.0 22.0 17.7/35.3 21.7 24.5/32.5 21.6 22.0/33.1 24.6 21.4 21.9 23.7 21.336.0 21.6/34.4 17.3 20.3 16.2/37.2 20.1 23.9/35.4 20.0 19.1 22.7 20.038.0 16.1 19.2/37.4 15.8 18.8 15.1/39.2 18.5 20.0 18.640.0 15.0 14.8 17.6 14.7 17.3 13.7/41.2 19.4/38.4 17.442.0 14.0/41.9 13.9 17.4/40.3 13.9 16.3 13.4 16.3 13.0/43.144.0 13.1 13.0 15.6/43.3 12.7 15.4 12.746.0 12.8/44.8 12.3 11.9 14.5 12.148.0 11.5/47.8 11.3 14.4/46.2 11.450.0 10.7 10.752.0 10.4/50.7 10.254.0 9.6/53.7

    tower 45.70m21.35 24.40 27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 26/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 1 3 3 2 1 3 2 2 1 2 2 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 35.0/14.615.0 34.6 31.9/15.516.0 33.4 31.5 28.9/16.4 26.4/17.318.0 31.4 31.7/18.8 29.6 29.0/19.9 27.8 26.0 23.9/18.220.0 29.6 30.7 27.9 29.0 26.4 26.6/20.9 24.6 23.022.0 28.1 29.0 26.5 27.4 25.1 25.9 23.4 24.2 21.9 22.0/23.024.0 26.7 27.5 25.2 25.9 23.9 24.6 22.4 23.0 20.9 21.526.0 25.5 26.2 24.1 24.7 22.9 23.4 21.4 21.9 20.0 20.528.0 24.5 25.0 23.1 23.6 22.0 22.4 20.6 21.0 19.2 19.630.0 23.6 24.0 22.3 22.6 21.2 21.5 19.8 20.2 18.5 18.832.0 22.8 23.1 21.9/32.4 21.5 21.8 20.5 20.8 19.2 19.4 17.9 18.234.0 22.1 22.4 20.8 20.8 21.0 20.3 19.9 20.1 19.5/35.5 18.6 18.8 17.4 17.536.0 20.0 21.7 19.5 20.2 20.4 19.1 19.3 19.4 19.2 18.1 18.2 18.1/37.0 16.9 17.038.0 17.8 20.7 18.4 18.3 19.8 18.0 18.9 18.9 18.0 17.6 17.7 17.6 16.2 16.5 17.0/38.540.0 16.8/38.9 18.6 17.2 16.5 19.0 17.0 17.2 18.5 17.1 17.2 17.2 16.6 15.4 16.1 16.342.0 17.2/41.3 16.0 14.7/41.9 17.1 15.9 15.6 17.8 16.0 15.9 16.8 15.7 14.7 15.5 15.444.0 15.0 11.9/45.1 15.2 14.8 14.0 16.2 15.0 14.5 16.4 14.8 14.1 14.8 14.646.0 14.2 11.6 14.9/44.3 13.9 11.0/47.0 13.3/44.8 14.6 14.1 13.1 15.0 13.9 13.5 14.2 13.848.0 13.4 11.0 13.1 10.7 13.6/47.2 13.3 10.5/49.0 11.8/47.8 13.6 13.0 12.3 13.7 12.950.0 12.6/49.2 10.3 12.4 10.0 12.5 10.2 12.2 12.3 9.5/51.0 11.0 12.8 12.052.0 9.8 11.8 9.5 11.9 9.6 12.0/50.2 11.6 9.3 10.5/50.7 11.5 11.3 8.9/52.954.0 9.2 11.7/52.1 8.9 11.3 9.1 11.0 8.8 10.7/53.1 10.8 8.656.0 8.9 8.5 10.9/55.1 8.6 10.5 8.3 10.3 8.158.0 8.7/56.6 8.0 8.1 10.0 7.9 9.8 7.760.0 7.9/59.6 7.7 7.4 9.3 7.362.0 7.4 7.1 9.0/60.9 6.964.0 7.4/62.5 6.7 6.566.0 6.5/65.5 6.268.0 5.970.0 5.8/68.4

    48.7542.65 45.70tower 45.70m

    36.55 39.60

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 27/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 23.1/19.120.0 22.7 19.9 17.6/20.9 15.4/21.822.0 21.6 19.6 17.5 15.424.0 20.7 21.1/24.1 19.1 19.2/25.1 17.2 15.326.0 19.8 20.3 18.5 18.9 16.8 16.9/26.1 15.028.0 19.0 19.4 17.8 18.1 16.5 16.6 14.7 15.0/27.230.0 18.3 18.6 17.2 17.5 15.8 16.2 13.9 14.532.0 17.7 17.9 16.7 16.9 14.9 15.8 13.1 14.134.0 17.1 17.3 16.2 16.3 14.2 15.1 12.4 13.336.0 16.6 16.8 15.4 15.8 13.4 14.3 11.7 12.538.0 16.2 16.2 14.7 15.3 12.8 13.6 11.1 11.840.0 15.8 15.8 15.8/40.1 14.1 14.9 15.1/41.6 12.2 12.9 10.6 11.242.0 15.4 15.4 15.1 13.5 14.2 15.0 11.7 12.3 13.7/43.1 10.1 10.744.0 15.0 15.0 14.3 13.0 13.6 14.3 11.2 11.8 13.6 9.6 10.2 12.3/44.646.0 13.8 14.7 13.5 12.6 13.1 13.6 10.8 11.3 13.2 9.2 9.7 11.848.0 12.7 14.3 12.7 12.2 12.6 12.7 10.4 10.8 12.6 8.9 9.3 11.250.0 11.6 13.1 11.9 11.8 12.2 12.0 10.1 10.5 11.9 8.5 8.9 10.652.0 10.6 12.1 11.2 11.1 11.9 11.2 9.8 10.1 11.1 8.3 8.6 10.154.0 9.7/53.7 11.0 10.5 8.1/54.9 10.2 11.5 10.7 9.5 9.8 10.5 8.0 8.3 9.756.0 9.9 10.0 7.9 9.2 10.6 10.1 7.7/56.8 9.4 9.6 9.9 7.8 8.1 9.258.0 9.8/56.1 9.6 7.5 8.9/56.6 9.6 9.6 7.5 8.7 9.4 9.4 7.1/58.8 7.7 7.8 8.860.0 9.1 7.1 9.1/59.0 9.1 7.1 8.1/59.6 9.1 8.9 6.9 7.6 7.7 8.4 6.5/60.762.0 8.7 6.7 8.6 6.8 8.2/61.9 8.5 6.5 7.4 7.6 8.0 6.364.0 8.3/63.9 6.3 8.2 6.4 8.1 6.1 7.3/62.5 7.5 7.7 6.066.0 6.0 7.8 6.1 7.7 5.9 7.4/64.9 7.4 5.668.0 5.7 7.6/66.8 5.8 7.3 5.6 7.1 5.370.0 5.4 5.5 6.9/69.8 5.3 6.8 5.172.0 5.2/71.3 5.2 5.0 6.5 4.874.0 5.0 4.8 6.4/72.7 4.676.0 4.9/74.3 4.5 4.378.0 4.3/77.2 4.180.0 3.982.0 3.8/80.2

    51.80 54.85 57.90 60.95tower 45.70m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 28/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 3 2 4 4 2 2 4 3 2 2 3 3 2 1 3 3 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    10.0 49.9/10.311.0 48.5 45.5/11.212.0 46.4 44.1 41.9/12.113.0 44.5 45.3/13.9 42.3 40.5 38.5 35.4/13.914.0 42.7 45.2 40.6 41.4/14.9 38.9 37.0 35.315.0 41.2 43.4 39.1 41.3 37.5 35.7 34.116.0 39.7 41.7 37.7 39.7 36.2 38.1 34.4 34.8/17.0 32.918.0 37.2 38.8 35.3 36.9 33.8 35.4 32.2 33.7 30.9 31.8/18.120.0 34.3 36.4 33.2 34.5 31.9 33.1 30.3 31.5 29.1 30.222.0 28.8 34.4 31.5 32.5 30.2 31.2 28.7 29.7 27.5 28.524.0 25.1 30.8 29.2/25.6 30.1 30.9 28.7 29.6 27.2 28.1 26.2 27.026.0 24.1/24.3 25.5 28.7 25.5 29.5 27.0/27.1 27.5 28.1 26.0 26.7 25.0 25.728.0 24.5/26.9 26.6 23.8/27.3 27.3 26.0 26.5 27.0 25.3/28.6 25.0 25.5 24.0 24.530.0 24.8 24.6/29.8 24.2 24.5 26.0 24.9 24.2 24.5 23.3/30.2 23.2 23.5 22.0/31.732.0 23.2 22.7 24.0/30.2 25.3 23.3 23.6 23.7 21.9 22.4 22.7 21.934.0 21.4 21.2 24.7/32.8 21.8 23.2/33.2 23.0 20.6 21.9 22.0 20.636.0 20.6/35.2 16.0/36.6 19.7 20.2 22.4/35.7 19.4 19.1 21.4 19.338.0 15.4 18.4 14.7/38.5 19.0 18.2 19.0/36.1 20.3 18.140.0 14.4 18.3/38.2 14.1 17.7 13.8/40.5 16.9 19.9/38.7 16.942.0 13.5 13.2 17.1/41.1 13.1 15.8 12.5/42.4 15.944.0 13.0/43.2 12.4 12.3 14.9 12.0 15.0 11.8/44.446.0 11.7 11.7 14.8/44.1 11.2 14.1 11.448.0 11.6/46.1 11.0 10.6 13.6/47.0 10.750.0 10.6/49.1 10.1 10.152.0 9.6 9.654.0 9.256.0 8.9/55.0

    30.5021.35 24.40 27.45tower 48.75m

    33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 29/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 1 3 2 2 1 3 2 2 1 2 2 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 32.6/14.815.0 32.4 29.9/15.616.0 31.3 29.6 27.4/16.5 24.9/17.418.0 29.3 29.4/19.1 27.7 26.3 24.6 22.7/18.320.0 27.6 28.7 26.1 26.7/20.2 24.8 24.9/21.2 23.3 21.822.0 26.2 27.1 24.8 25.6 23.6 24.4 22.1 22.6/22.2 20.7 20.6/23.324.0 24.9 25.6 23.5 24.3 22.5 23.1 21.1 21.7 19.8 20.326.0 23.8 24.4 22.5 23.1 21.5 22.0 20.2 20.7 18.9 19.428.0 22.8 23.3 21.5 22.0 20.6 21.0 19.3 19.8 18.1 18.530.0 21.9 22.3 20.7 21.1 19.8 20.2 18.6 18.9 17.5 17.832.0 21.2 21.5 20.6/33.2 20.0 20.3 19.2 19.4 18.0 18.2 16.9 17.134.0 20.6 20.7 20.1 19.4 19.6 19.1/34.7 18.6 18.7 17.4 17.6 16.3 16.536.0 20.0 20.1 18.8 18.8 18.9 18.4 18.0 18.1 18.2/36.3 16.9 17.0 17.0/37.8 15.8 15.938.0 17.8 19.6 17.8 18.3 18.4 17.3 17.6 17.6 17.4 16.5 16.5 16.9 15.4 15.5 16.0/39.340.0 16.5/39.1 18.8 16.8 16.5 18.0 16.3 17.2 17.2 16.4 16.1 16.1 16.0 15.1 15.0 15.642.0 18.1/41.6 15.7 14.5 17.3 15.4 15.6 16.8 15.5 15.8 15.7 15.1 14.7 14.7 14.844.0 14.7 15.4 14.5 14.0 16.3 14.5 14.5 15.4 14.3 14.1 14.4 14.046.0 13.8 10.8/46.4 14.9/44.5 13.5 13.3/44.9 14.8 13.7 13.1 15.1 13.6 13.5 14.1 13.348.0 13.1 10.4 12.8 10.0/48.3 13.6/47.5 12.9 11.7/47.9 13.7 12.8 12.3 13.7 12.650.0 12.4 9.8 12.1 9.5 12.2 9.5/50.3 12.3 12.0 11.0 12.8 11.852.0 9.2 11.5 8.9 11.5 9.1 12.0/50.4 11.2 8.8/52.2 10.4/50.8 11.6 11.154.0 8.7 11.2/52.9 8.4 11.0 8.6 10.7 8.3 10.7/53.4 10.4 7.8/54.256.0 8.3 8.0 10.5/55.8 8.1 10.2 7.8 9.9 7.658.0 7.9/57.9 7.6 7.7 9.7 7.4 9.5 7.260.0 7.2 7.3 9.5/58.8 7.0 9.0 6.862.0 7.0/60.9 6.9 6.6 8.5/61.7 6.464.0 6.7/63.8 6.3 6.166.0 6.0 5.868.0 5.9/66.7 5.570.0 5.3/69.7

    36.55 39.60 42.65tower 48.75m

    45.70 48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 30/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 1 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 21.9/19.220.0 21.5 19.8/20.1 17.0/21.0 15.0/21.922.0 20.4 19.1 17.0 15.024.0 19.5 19.7/24.3 18.3 18.1/25.4 16.9 14.926.0 18.7 19.1 17.5 17.9 16.4 16.5/26.4 14.9 14.5/27.528.0 17.9 18.3 16.9 17.2 15.8 16.1 14.5 14.530.0 17.2 17.5 16.3 16.5 15.3 15.5 13.9 14.432.0 16.6 16.8 15.7 15.9 14.7 14.9 13.1 13.934.0 16.0 16.2 15.2 14.9 14.2 14.4 12.4 13.336.0 15.5 15.7 14.8 14.4 13.4 13.9 11.7 12.638.0 15.1 15.2 14.4 14.0 12.8 13.5 11.1 11.940.0 14.7 14.7 15.0/40.8 14.0 13.4 12.2 13.0 10.6 11.342.0 14.3 14.3 14.4 13.5 13.3 13.9/42.4 11.7 12.4 12.8/43.9 10.1 10.744.0 14.0 14.0 13.7 13.0 13.0 13.6 11.2 11.8 12.8 9.6 10.2 11.7/45.446.0 13.8 13.7 13.0 12.6 12.7 13.1 10.8 11.3 12.4 9.2 9.7 11.648.0 12.7 13.4 12.3 12.2 12.3 12.4 10.4 10.9 12.0 8.8 9.3 11.250.0 11.6 13.2 10.9 11.8 11.9 11.7 10.0 10.5 11.5 8.5 8.9 10.852.0 10.6 12.1 10.6 11.1 11.6 11.0 9.8 10.1 10.8 8.2 8.6 10.354.0 9.7/53.8 11.1 10.2 10.2 10.7 10.3 9.5 9.8 10.2 8.0 8.3 9.856.0 10.0 9.7 7.2/56.2 9.2 9.7 9.8 9.3 9.6 9.6 7.8 8.1 9.458.0 9.8/56.9 9.2 7.0 8.8/56.7 8.7 9.3 6.8/58.1 8.7 9.4 9.1 7.6 7.8 9.060.0 8.7 6.6 8.0/59.3 8.8 6.6 8.1/59.7 9.1 8.7 6.5/60.1 7.5 7.7 8.762.0 8.4 6.2 8.4 6.3 8.2 8.2 6.2 7.4 7.6 8.0 6.164.0 8.0 5.9 8.0 5.9 8.1/62.2 7.8 5.7 7.3/62.6 7.5 7.6 5.666.0 7.9/64.7 5.6 7.6 5.6 7.4 5.4 7.4/65.2 7.2 5.368.0 5.3 7.2/67.6 5.4 7.1 5.1 6.9 4.970.0 5.0 5.1 6.8 4.8 6.6 4.672.0 4.8 4.8 6.6/70.6 4.6 6.3 4.474.0 4.7/72.6 4.6 4.4 6.0/73.5 4.176.0 4.4/75.2 4.2 3.978.0 4.0 3.880.0 3.9/78.5 3.682.0 3.4/81.5

    tower 48.75m57.90 60.9551.80 54.85

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 31/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 4 4 2 2 4 3 2 2 3 3 2 1 3 3 2 1 3 3 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    10.0 45.5/10.411.0 44.4 41.6/11.312.0 42.5 40.5 38.5/12.213.0 40.7 38.8 37.3 35.3/13.114.0 39.1 40.9/14.2 37.2 35.8 34.2 32.815.0 37.6 39.7 35.8 37.4/15.2 34.5 32.9 31.616.0 36.3 38.2 34.6 36.4 33.3 34.4/16.3 31.7 31.8/17.3 30.518.0 34.0 35.5 32.3 33.8 31.1 32.6 29.6 31.1 28.5 29.4/18.320.0 32.1 33.3 30.4 31.6 29.2 30.4 27.9 29.0 26.9 28.022.0 29.1 31.4 28.8 29.8 27.7 28.6 26.3 27.3 25.4 26.324.0 25.4 29.8 27.5 28.2 26.3 27.1 25.0 25.8 24.2 24.926.0 24.2/24.4 26.2 26.9/26.4 25.8 26.9 25.0/27.9 25.2 25.8 23.9 24.5 23.1 23.728.0 24.8/27.1 25.5 23.9/27.4 25.9 24.9 24.3 24.7 23.5/29.4 22.9 23.4 22.1 22.630.0 23.7 24.8 23.2 23.7 23.8 23.0 22.1 22.4 21.7/31.0 21.3 21.732.0 22.2 24.5/30.1 21.7 23.6/30.3 23.1 21.5 21.6 21.6 21.0 20.6 20.8 20.4/32.534.0 20.9 20.3 22.7/33.0 20.2 21.2/33.3 21.0 19.6 20.1 20.2 19.636.0 19.4 14.4/37.9 19.2 19.0 20.4 18.5 19.2 19.6 18.538.0 14.4 17.8 13.7/39.8 17.7 17.4 19.0/36.2 19.3 17.440.0 13.4 17.3/39.0 13.3 16.7 12.3/41.8 16.5 19.1/38.9 16.542.0 12.7 12.3 15.8/41.9 12.3 15.5 11.8/43.7 15.444.0 11.9 11.6 11.6 14.4 11.3 14.5 10.8/45.746.0 11.7/44.5 10.9 10.8 13.9/44.9 10.5 13.7 10.748.0 10.4/47.4 10.2 9.9 12.9/47.8 10.050.0 9.8 9.3 9.552.0 9.7/50.4 8.8 8.954.0 8.6/53.3 8.456.0 8.158.0 8.0/56.3

    tower 51.80m21.35 24.40 27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 32/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 1 3 2 2 1 2 2 2 1 2 2 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    14.0 30.2/14.915.0 30.1 27.6/15.816.0 29.0 27.5 25.5/16.6 23.4/17.518.0 27.2 27.1/19.4 25.8 24.6 23.1 21.3/18.420.0 25.6 26.7 24.3 24.6/20.4 23.2 23.1/21.5 21.8 20.522.0 24.2 25.1 23.0 23.8 22.0 22.8 20.7 21.4/22.5 19.5 19.3/23.524.0 23.0 23.7 21.8 22.8 20.9 21.6 19.7 20.3 18.5 19.126.0 21.9 22.5 20.8 21.3 20.0 20.5 18.8 19.3 17.7 18.228.0 21.0 21.5 19.9 20.3 19.1 19.6 18.0 18.4 17.0 17.330.0 20.2 20.5 19.1 19.5 18.4 18.7 17.3 17.6 16.3 16.432.0 19.5 19.7 18.4 18.7 17.7 18.0 16.7 16.9 15.7 15.934.0 18.9 19.1 19.2 17.8 18.0 17.8/35.5 17.2 17.3 16.1 16.3 15.2 15.336.0 18.4 18.5 18.0 17.3 17.4 17.5 16.7 16.8 17.0/37.1 15.7 15.8 14.7 14.838.0 17.8 18.0 17.0 16.9 16.9 16.5 16.2 16.3 16.6 15.2 15.3 15.9/38.6 14.3 14.340.0 17.4/39.2 17.4 16.0 16.5 16.5 15.6 15.9 15.8 15.7 14.9 14.8 15.3 13.9 13.9 14.6/40.142.0 16.8/41.9 15.2 14.5 16.2 14.7 15.6 15.5 14.9 14.6 14.5 14.4 13.6 13.6 14.044.0 14.4 14.4/42.1 15.6 14.0 14.0 15.2 14.1 14.3 14.2 13.7 13.4 13.3 13.346.0 13.5 10.1/47.6 15.3/44.8 13.3 13.2/45.0 14.9 13.4 13.1 13.9 13.0 13.2 13.0 12.648.0 12.6 9.8 12.4 9.3/49.6 14.6/47.8 12.4 11.6 13.8 12.3 12.3 12.8 12.050.0 12.0 9.1 11.6 9.1 11.8 9.0/51.6 12.4 11.7 11.0 12.7 11.452.0 11.7/50.7 8.6 11.0 8.4 11.2 8.5 11.9/50.7 11.0 8.2/53.5 11.0/50.9 11.7 10.954.0 8.1 10.5/53.7 7.8 10.6 8.0 10.3 7.8 10.9/53.6 10.2 7.4/55.556.0 7.7 7.4 10.1 7.6 9.7 7.3 9.6 7.258.0 7.3 7.0 9.9/56.6 7.1 9.3 6.8 9.0 6.860.0 7.0/59.2 6.6 6.8 8.9/59.6 6.5 8.6 6.362.0 6.3 6.4 6.1 8.2 5.964.0 6.2/62.1 6.1 5.8 8.2/62.5 5.666.0 5.8/65.1 5.5 5.368.0 5.2 5.070.0 4.872.0 4.7/71.0

    48.7542.65 45.70tower 51.80m

    36.55 39.60

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 33/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 1 1 2 2 1 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    18.0 20.5/19.320.0 20.2 17.8/20.2 16.7/21.122.0 19.1 17.2 16.6 14.724.0 18.2 18.5/24.6 16.5 17.0/25.6 16.2 14.626.0 17.4 17.9 15.8 16.9 15.5 15.6/26.7 14.5 14.3/27.728.0 16.7 17.0 15.2 16.1 14.9 15.2 13.9 14.230.0 16.0 16.3 14.7 15.5 14.3 14.5 13.4 13.632.0 15.4 15.6 14.2 14.9 13.8 14.0 12.9 13.134.0 14.9 15.0 13.8 14.3 13.4 13.5 12.4 12.636.0 14.4 14.5 13.4 13.9 13.0 13.0 11.7 12.238.0 14.0 14.0 13.0 13.4 12.6 12.6 11.1 11.840.0 13.6 13.6 13.9/41.6 12.7 13.0 12.2 12.2 10.6 11.342.0 13.2 13.2 13.7 12.4 12.7 12.9/43.2 11.7 11.9 10.1 10.844.0 12.9 12.9 13.0 12.2 12.3 12.7 11.2 11.6 11.7/44.7 9.6 10.246.0 12.7 12.6 12.3 12.0 12.1 12.2 10.8 11.3 11.5 9.2 9.8 10.7/46.248.0 12.5 12.3 11.7 11.9 11.8 11.8 10.4 10.9 11.1 8.8 9.3 10.450.0 11.6 12.1 11.1 11.8 11.6 11.3 10.0 10.5 10.8 8.5 9.0 10.152.0 10.5 12.0 10.6 11.1 11.4 10.7 9.7 10.2 10.4 8.2 8.6 9.854.0 9.4/53.9 11.2 10.1 10.2 11.3 10.2 9.5 9.8 9.9 8.0 8.3 9.556.0 10.1 9.5 6.9/57.4 9.2 10.7 9.5 9.3 9.6 9.5 7.8 8.1 9.258.0 9.7/56.6 8.9 6.7 8.8/56.8 9.8 8.9 6.6/59.4 8.7 9.4 9.0 7.6 7.9 8.860.0 8.4 6.2 9.1/59.5 8.4 6.4 8.1/59.8 9.2 8.6 6.0/61.4 7.5 7.7 8.362.0 8.0 5.8 8.1 5.8 8.3 7.9 5.7 7.3 7.6 7.8 5.4/63.364.0 7.6 5.5 7.7 5.3 8.0/62.5 7.5 5.2 7.2/62.7 7.5 7.4 5.166.0 7.3/65.5 5.1 7.3 5.0 7.1 4.9 7.4/65.4 7.0 4.768.0 4.8 7.0 4.7 6.8 4.7 6.6 4.570.0 4.5 6.9/68.4 4.4 6.4 4.4 6.3 4.372.0 4.3 4.2 6.1/71.4 4.1 6.0 4.074.0 4.2/73.9 4.0 3.9 5.7 3.776.0 3.8/76.9 3.6 5.6/74.3 3.578.0 3.4 3.380.0 3.3/79.8 3.182.0 2.984.0 2.9/82.7

    51.80 54.85 57.90 60.95tower 51.80m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 34/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 1 3 3 2 1 3 3 2 1 3 2 2 1 3 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    11.0 38.1/11.412.0 37.2 35.2/12.313.0 35.6 34.3 32.4/13.214.0 34.1 32.9 31.5 30.1/14.115.0 32.8 34.0/15.5 31.7 30.3 29.2 27.916.0 31.6 33.4 31.5 31.5/16.5 29.2 28.9/17.6 28.2 26.918.0 29.6 31.0 28.5 30.0 27.2 28.6 26.4 27.0/18.6 25.2 25.0/19.620.0 27.8 29.0 26.8 28.0 25.6 26.7 24.8 25.9 23.6 24.722.0 26.3 27.2 25.4 26.3 24.2 25.1 23.4 24.3 22.3 23.224.0 25.1 25.8 24.1 24.8 22.9 23.7 22.2 22.9 21.3 21.926.0 24.1 24.5 23.1 23.6 21.9 22.4 21.2 21.8 20.2 20.728.0 23.3/27.5 23.4 23.1/28.7 22.2 22.6 21.0 21.4 20.3 20.8 19.3 19.830.0 22.9 22.2 21.6 21.7 22.1/30.2 20.2 20.5 20.3/31.7 19.6 19.9 18.5 18.932.0 22.8/30.4 20.8 21.4/30.4 21.1 20.7 19.7 19.8 20.2 18.9 19.1 19.4/33.3 17.9 18.134.0 19.5 20.7/33.3 19.4 19.3/33.4 19.2 18.9 18.4 18.5 19.0 17.3 17.5 17.9/34.836.0 18.4 18.3 18.9 17.8 18.1 18.0 17.8 16.9 16.9 17.338.0 17.4 17.3 18.8/36.2 16.8 18.0/36.3 17.6 16.8 16.6 16.4 16.340.0 16.5/39.8 12.3/41.1 16.3 15.9 17.3/39.2 15.9 16.4/39.3 16.1 15.442.0 12.1 15.3 11.4/43.1 15.1 15.1 16.0 14.644.0 10.9 15.0/42.7 10.9 14.4 10.6/45.0 14.3 15.9/42.1 13.946.0 10.4 10.3 13.8/45.6 10.0 13.4 9.8/47.0 13.248.0 9.8 9.8 9.4 12.6 9.4 12.4 9.2/48.950.0 9.6/48.7 9.2 8.8 12.3/48.6 8.9 11.6 8.952.0 8.8/51.7 8.3 8.4 11.1/51.5 8.354.0 7.9 8.0 7.756.0 7.8/54.6 7.6 7.258.0 7.4/57.5 6.860.0 6.562.0 6.5/60.5

    24.40 27.45 30.50 33.50tower 54.85m

    36.55

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 35/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 2 1 2 2 2 1 2 2 1 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    15.0 25.7/15.916.0 25.6 23.6/16.8 21.8/17.618.0 23.9 22.9 21.6 20.1/18.5 19.2/19.420.0 22.5 22.7/20.7 21.6 21.3/21.7 20.4 19.3 18.922.0 21.2 22.0 20.5 21.2 19.3 19.4/22.8 18.2 17.9/23.8 17.924.0 20.1 20.8 19.4 20.1 18.4 18.9 17.3 17.9 17.0 17.0/24.926.0 19.2 19.7 18.5 19.0 17.5 18.0 16.5 17.0 16.2 16.628.0 18.3 18.7 17.7 18.1 16.7 17.1 15.8 16.2 15.5 15.830.0 17.6 17.9 17.0 17.3 16.1 16.4 15.2 15.4 14.9 15.132.0 16.9 17.2 16.4 16.6 15.5 15.7 14.6 14.8 14.3 14.534.0 16.3 16.5 15.8 16.0 14.9 15.1 14.1 14.2 13.8 13.936.0 15.9 15.9 16.7/36.3 15.4 15.5 16.0/37.8 14.5 14.5 13.6 13.7 13.3 13.438.0 15.5 15.5 15.8 15.0 15.0 15.9 14.0 14.1 14.4/39.4 13.2 13.3 12.9 12.940.0 15.2 15.0 14.9 14.6 14.6 15.1 13.7 13.7 14.3 12.9 12.9 13.2/40.9 12.5 12.542.0 14.6 14.7 14.1 14.4 14.2 14.3 13.4 13.3 13.8 12.6 12.5 13.0 12.2 12.1 12.6/42.444.0 14.5/42.2 14.6 13.4 14.1 13.9 13.5 13.2 13.0 13.1 12.3 12.2 12.5 11.9 11.8 12.246.0 14.5/45.1 12.7 13.9/45.2 13.8 12.9 13.0 12.8 12.4 12.1 11.9 12.0 11.6 11.5 11.748.0 12.1 13.4 12.2 11.7 12.6 11.8 12.0 11.7 11.5 11.4 11.3 11.250.0 11.5 8.3/50.9 11.5 11.6/48.1 12.4 11.3 11.1 11.6 10.9 11.3 11.0 10.752.0 10.8 8.1 10.8 8.1/52.9 12.3/51.0 10.7 10.6/51.0 11.5 10.4 10.6 10.9 10.154.0 10.2 7.3 10.2 7.3 10.1 7.0/54.8 11.4/53.9 10.0 9.4 10.8 9.756.0 10.0/54.5 6.9 9.8 6.9 9.5 6.7 9.5 6.5/56.8 10.2 9.258.0 6.5 9.4/57.4 6.5 9.0 6.4 9.0 6.3 9.9/56.9 8.8 5.9/58.760.0 6.2 6.2 8.6 6.2 8.5 5.9 8.4 5.662.0 5.9 5.8 8.5/60.4 5.8 7.9 5.6 7.9 5.364.0 5.6/63.4 5.5 5.4 7.7/63.3 5.2 7.4 4.966.0 5.3/66.4 5.1 4.9 7.0 4.768.0 4.8 4.6 6.8/66.3 4.470.0 4.6/69.3 4.4 4.272.0 4.2 3.974.0 4.1/72.3 3.776.0 3.6/75.2

    51.80tower 54.85m

    39.60 42.65 45.70 48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 36/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 1 1 2 2 1 1 2 1 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11

    20.0 17.5/20.3 16.1/21.222.0 16.9 15.9 14.3/22.124.0 16.1 15.8/25.9 15.2 14.226.0 15.4 15.8 14.5 14.5/26.9 13.728.0 14.8 15.1 14.0 14.2 13.1 13.430.0 14.2 14.5 13.4 13.6 12.6 12.832.0 13.7 13.9 12.9 13.1 12.1 12.334.0 13.2 13.4 12.5 12.6 11.7 11.836.0 12.8 12.9 12.1 12.1 11.3 11.438.0 12.4 12.4 11.7 11.7 11.0 11.040.0 12.1 12.1 11.4 11.4 10.6 10.642.0 11.7 11.7 11.7/43.9 11.1 11.0 10.1 10.344.0 11.5 11.4 11.7 10.8 10.7 10.7/45.5 9.6 10.046.0 11.2 10.9 11.3 10.5 10.4 10.6 9.2 9.8 9.7/47.048.0 11.0 10.7 10.9 10.3 10.2 10.3 8.8 9.4 9.650.0 10.8 10.5 10.6 10.0 10.0 9.9 8.5 9.0 9.352.0 10.7 10.3 10.3 9.7 9.8 9.6 8.2 8.6 9.054.0 10.2 10.2 9.8 9.5 9.7 9.4 8.0 8.3 8.756.0 9.2 9.9 9.3 9.3 9.5 9.1 7.8 8.1 8.558.0 8.7/56.9 9.6/59.8 8.9 8.7 9.4 8.7 7.6 7.9 8.360.0 8.4 5.5/60.7 8.1/59.9 9.2 8.3 7.5 7.7 8.062.0 7.9 5.4 8.4 7.8 5.0/62.7 7.4 7.5 7.664.0 7.4 5.1 8.1/62.7 7.3 4.9 7.3/62.8 7.4 7.2 4.6/64.666.0 7.1 4.9 6.9 4.7 7.3/65.7 6.8 4.468.0 6.8 4.7 6.5 4.4 6.4 4.170.0 6.3/69.2 4.4 6.2 4.2 6.1 3.972.0 4.1 6.0 3.9 5.8 3.774.0 3.8 5.8/72.1 3.7 5.5 3.476.0 3.6 3.5 5.4/75.1 3.378.0 3.4 3.2 3.080.0 3.3/78.1 3.0 2.982.0 2.9/81.1 2.684.0 2.4

    54.85tower 54.85m

    60.9557.90

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 37/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 3 3 2 1 3 2 2 1 3 2 2 1 2 2 2 1 2 2 2 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    12.0 32.1/12.413.0 31.4 29.5/13.314.0 30.1 28.8 27.5/14.215.0 28.9 27.7 26.8 25.4/15.116.0 27.9 28.3/16.8 26.7 26.3/17.8 25.9 24.7 23.618.0 26.0 27.3 24.8 26.2 24.2 24.5/18.9 23.1 22.7/19.9 22.020.0 24.4 25.5 23.3 24.4 22.7 23.7 21.7 22.7 20.6 20.8/21.022.0 23.1 23.9 22.0 22.8 21.4 22.2 20.4 21.2 19.5 20.224.0 21.9 22.6 20.8 21.5 20.3 21.0 19.4 20.0 18.4 19.026.0 20.9 21.4 19.9 20.4 19.3 19.9 18.4 18.9 17.5 18.028.0 20.1 20.5 19.0 19.4 18.5 18.9 17.6 18.0 16.7 17.130.0 19.4 19.6 20.5/31.0 18.3 18.6 17.8 18.1 16.9 17.2 16.0 16.332.0 19.2/30.5 19.0 19.8 17.8 17.9 19.0/32.5 17.2 17.4 16.3 16.5 15.4 15.634.0 18.5/33.6 18.6 17.4/33.5 17.3 18.0 16.7 16.8 18.0/34.1 15.7 15.8 16.6/35.6 14.9 15.036.0 17.5 17.0 16.9 16.5 16.3 17.1 15.3 15.3 16.4 14.4 14.4 15.1/37.138.0 16.5 16.8/36.5 15.9 16.4/36.4 15.9 16.1 15.0 14.9 15.6 14.0 14.0 14.840.0 15.6 15.1 15.6/39.5 15.2 14.7/39.4 14.6 14.7 13.8 13.6 14.142.0 14.9 14.3 14.4 14.4 13.9 13.7 13.3 13.544.0 14.3/43.5 10.4/44.3 13.6 13.7 14.3/42.4 13.2 13.6/42.3 13.1 12.846.0 9.9 13.1 9.5/46.3 13.1 12.6 12.9/45.3 12.148.0 9.5 13.0/46.4 9.0 12.5 8.8/48.3 12.0 11.550.0 8.6 8.5 12.0/49.4 8.4 11.5 8.1/50.2 11.052.0 8.1 7.9 7.8 11.1 7.8 10.5 7.1/52.254.0 7.8/52.9 7.4 7.2 11.0/52.3 7.2 10.1 7.056.0 7.0/55.9 6.8 6.8 9.8/55.3 6.758.0 6.4/58.8 6.4 6.360.0 6.0 5.962.0 5.6/61.8 5.564.0 5.166.0 5.0/64.7

    36.55 39.60tower 57.90m

    27.45 30.50 33.50

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 38/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65 88 85 75 65Reeved lines 2 2 2 1 2 2 1 1 2 2 1 1 2 2 1 1 2 2 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11

    16.0 21.8/16.9 20.2/17.718.0 21.2 20.1 18.6/18.6 17.7/19.520.0 20.0 18.9 17.9 17.5 16.4/20.422.0 18.9 19.6 17.9 17.9/23.0 16.9 16.6 15.824.0 17.9 18.5 16.9 17.5 16.0 16.5/24.1 15.7 15.6/25.1 15.026.0 17.0 17.5 16.1 16.6 15.3 15.7 14.9 15.3 14.3 14.5/26.228.0 16.3 16.7 15.4 15.8 14.6 14.9 14.3 14.6 13.7 14.030.0 15.6 15.9 14.7 15.0 14.0 14.2 13.6 13.9 13.2 13.432.0 15.0 15.2 14.2 14.4 13.4 13.6 13.1 13.3 12.6 12.834.0 14.5 14.6 13.7 13.8 12.9 13.0 12.6 12.7 12.2 12.336.0 14.0 14.1 13.2 13.3 12.5 12.6 12.1 12.2 11.8 11.838.0 13.6 13.6 14.3/38.6 12.8 12.8 12.1 12.1 11.7 11.8 11.4 11.440.0 13.3 13.2 13.8 12.5 12.4 12.9/40.2 11.7 11.7 11.9/41.7 11.4 11.4 11.1 11.042.0 13.1 12.9 13.3 12.2 12.1 12.5 11.5 11.4 11.8 11.0 11.0 11.2/43.2 10.7 10.744.0 12.9 12.6 12.8 12.0 11.8 12.0 11.2 11.1 11.3 10.8 10.7 11.0 10.5 10.4 10.6/44.746.0 12.7/45.3 12.5 12.3 11.8 11.6 11.5 11.0 10.8 10.9 10.5 10.4 10.6 10.2 10.1 10.348.0 12.4 11.7 11.7 11.4 11.1 10.9 10.6 10.5 10.3 10.2 10.2 10.0 9.9 9.950.0 12.3/48.3 11.1 11.6/48.2 11.3 10.7 10.8 10.5 10.2 10.2 10.0 9.8 9.9 9.7 9.652.0 10.6 11.2/51.2 10.2 10.7/51.1 10.4 9.9 10.1 9.8 9.5 9.7 9.5 9.254.0 10.2 7.2/54.1 9.7 10.3 9.4 9.5 9.7 9.1 9.7 9.4 9.056.0 9.6 6.7 9.3 6.2/56.1 10.2/54.2 9.0 9.4/54.1 9.6 8.7 9.3 9.3 8.758.0 9.0 6.4 8.9 6.1 8.6 5.9/58.1 9.5/57.1 8.3 9.1/57.0 9.2 8.560.0 8.9/58.2 5.9 8.6 5.8 8.3 5.7 8.0 5.3 9.0 8.1 5.2/61.062.0 5.5 8.4/61.2 5.6 8.0 5.4 7.7 5.0 8.9/60.1 7.7 5.064.0 5.1 4.9 7.3 4.8 7.3 4.7 7.3 4.866.0 4.8 4.7 7.2/64.1 4.6 7.0 4.5 6.9 4.568.0 4.7/67.7 4.5 4.4 6.9/67.0 4.3 6.5 4.370.0 4.3 4.2 4.1 6.1 4.172.0 4.2/70.6 4.1 3.9 3.974.0 3.9/73.5 3.7 3.776.0 3.6 3.678.0 3.5/76.5 3.480.0 3.3/79.4

    42.65 45.70 54.8551.80tower 57.90m48.75

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 39/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75 65 88 85 75 65Reeved lines 2 1 1 1 2 1 1 1Wind(m/sec)Radius(m) 11 11 11 11 11 11 11 11

    20.0 15.1/21.322.0 14.9 13.8/22.224.0 14.2 13.326.0 13.5 13.5/27.2 12.728.0 13.0 13.2 12.2 12.3/28.230.0 12.4 12.4 11.7 11.932.0 12.0 12.1 11.2 11.434.0 11.5 11.6 10.8 10.936.0 11.1 11.2 10.5 10.538.0 10.8 10.8 10.1 10.140.0 10.4 10.4 9.8 9.842.0 10.1 10.1 9.5 9.544.0 9.9 9.8 9.3 9.246.0 9.6 9.5 9.6/46.3 9.0 8.9 8.8/47.848.0 9.4 9.3 9.3 8.8 8.7 8.850.0 9.2 9.1 9.0 8.5 8.5 8.552.0 9.1 8.9 8.7 8.2 8.3 8.254.0 9.0 8.7 8.4 8.0 8.1 7.956.0 8.9 8.6 8.2 7.8 8.0 7.758.0 8.7 8.5 8.0 7.6 7.9 7.460.0 7.8 8.4 7.8 7.5 7.7 7.362.0 8.3 7.5 4.6/63.9 7.4 7.5 7.164.0 8.2/63.0 7.2 4.6 7.3/62.9 7.4 6.9 4.1/65.966.0 6.8 4.4 7.2 6.6 4.168.0 6.5 4.2 6.3 3.970.0 6.3 3.9 6.1 3.772.0 6.1 3.7 5.8 3.574.0 6.0/72.9 3.5 5.6 3.376.0 3.4 5.5/75.9 3.178.0 3.2 2.980.0 3.1 2.882.0 3.0 2.784.0 2.9/82.4 2.586.0 2.4/85.3

    60.9557.90tower 57.90m

    37-161-024.0ER1S0503 Hitachi Sumitomo Heavy Industries Construction Crane Co.,Ltd.

  • EC404025 (P- 40/42) SCX2500, luffing jib ratings 360 deg Summary chart acc. EN1300 & DIN15018/3

    luffing jib with tower main hoist installed 93.7t upper counterweight + 14.0t lower weightUnit: t

    Jib length (m)Tower angle (°) 88 85 75