Wave Brochure
-
Upload
rahil-tasawar -
Category
Documents
-
view
670 -
download
86
Transcript of Wave Brochure
E-mail : [email protected]
Product Catalogue
3
Our focus on quality begins from the raw material stage itself. The raw materials used in body and glaze preparation are mostly imported from reputed companies in the UK. There are numerous quality checks during every stage in the body and glaze preparation. The kilns which run on natural gas are from U.K. with state of the art controls. The finished ware is checked for various parameters such as water absorp-tion, crazing resistance, resistance to chemicals, resistance to staining and burning, abrasion based on European/British and SASO standards.
We are confident that you will find the quality and reliability of our products will exceed your expectations and will give you many years of trouble free performance. Welcome to the world of World-Class Sanitaryware and experience the change.
Oman Ceramics Co. SAOG (OCC) was set up in the year 1999 to manufacture high quality vitreous china sanitaryware primarily for exports to the discerning customers in western Europe.
Its manufacturing plant, which boasts of the state-of-the-art plant and machinery and technical knowhow, is located in Sohar in the Sultanate of Oman with reputed expe-rienced technical knowhow.
The major raw materials for body namely ball clay and china clay are imported from UK and almost all glaze materials are imported from reputed companies in UK or west Europe.
The products of Oman Ceramics Company SAOG (OCC) are sold under the brand name WAVE. Its products are exported to over twelve different countries and are avail-able at over 500 outlets around the world. Primary markets where OCC’s products are sold in WAVE brand name in Oman, UAE, Saudi Arabia, Bahrain, Qatar, Kuwait, Jordan, Syria, Srilanka etc.
We Export 30% of our production to U.K market which itself a testimonial for World class Quality Sandards.
OCC’s products meet the requirements of British Standards, SASO standards (Saudi Arabian Standards Organization) and also approved by various prestigious consul-tants, builders and Government organizations.
We have Quality Management system ISO 9001: 2008 from UKAS International Certifi-cation agency. Our products are certified by KIWA,Netherland for its remarkable qual-ity in the interntional market. CERAM which is the product certification body approved our products for this european market. In addition to this OCC has third party certifi-cate from EXOVA is the bench mark certificate for the gulf countries. Our products are approved by Abu Dhabi Municipality, Ministry of Housing and Works, Kuwait, Ministry of Defence Engineering Services, Diwan of Royal court, Royal Palace Affairs Oman, Royal Oman Police, Ministry of Education, Oman Ministry of Housing, Electricity and Water, Oman and other ministries in the Sultanate of Oman. OCC has supplied its products to many prestigious projects in the U.A.E.
The product range available is vast and varies from the simple and elegant shapes to the wild and exotic shapes, from the elegant shapes to the wild and exotic shapes, from the contemporary and modern designs to the traditional and classic designs. OCC’s products are offered in regular colours as well as in exotic finishes such as gold, platinum, copper, bronze etc.
OCC’s products are on par with the world’s leading brands in terms of their product quality and design. Despite that, the products are very competitively priced and are highly affordable.
Com
pany
Pro
file
Company Profile
Cer
tifi
cate
Cer
tifi
cate
World classSanitaryware...
ContentsCo e s
Con
tent
s
Andromeda 6-7
Madrid 8-9
Wales 10-11
Vienna 12-13
Vienna Wall Hung 14-15
Zurich 16-17
Zurich Wall Hung 18-19
Florence 20-21
Savoy 22-23
Lincoln 24-25
Charente 26-27
Milano 28-29
Compact 30-31
Modena 32-33
Loire 34-35
Rhine New 36-37
Domino New 38-39
Danube 40-41
World classSanitaryware...
ContentsCo e s
Con
tent
s
Sara 42-43
Sea Shell 44-45
Bali 46-47
Aquasave 48-49
Greenwave 50-51
Preserve 52-53
Children 54-55
Loire Wall Hung 56-57
Victory Wall Hung 58-59
Lounge Wall Hung 60-61
Fifa Wall Hung 62-63
Domino Wall Hung 64-65
Milano Wall Hung 66-67
Free Standing Basins 68-69
Vanity Basins 70-71
Wall Mounting Basins 72-73
Semi Recessed Basins 74-75
Back to Wall Closets 76-77
Special Need Layout 78-81
Boston Single Piece 82-83
Lincoln Elite 84-85
Smart 86-87
Asian Pans 88-89
Closet Selection(CC/Single Piece/WallHung) 90-93
Urinals 94-95
Bathtubs & Shower Enclosures 96-97
Seat Cover 98-99
Accesories & fittings 100-101
Instructions 102-103
Installations 104-105
Con
tent
s
Andromeda
Savoy
Madrid
Zurich
Vienna Zurich Wall Hung
Wales
Florence
Page
6
- 7
Page
14
- 15
Page
22
- 23
Page
12
- 13
Page
18
- 19
Page
8
- 9
Page
16
- 17
Page
10
- 11
Page
20
- 21
Lincoln
Charente
Milano
Page
26
- 27
Page
24
- 25
Page
28
- 29
Vienna Wall Hung
Con
tent
s
Compact
Modena
Loire
Rhine New
Page
30
- 31
Page
34
- 35
Page
32
- 33
Page
36
- 37
Domino New
Page
38
- 39
DanubePa
ge
40 -
41
Sara
Page
42
- 43
Sea Shell
Page
44
- 45
Page
46
- 47
Page
50
- 51
Page
48
- 49
Page
52
- 53
Bali
Aquasave
Greenwave
Preserve
Con
tent
s
Children
Fifa Wall Hung
Wall Mounting Basins
Free Standing BasinsLoire Wall Hung
Domino Wall Hung
Semi Recessed Basins
Victory Wall Hung
Milano Wall Hung
Back to Wall Closets
Lounge Wall Hung
Vanity Basins
Page
54
- 55
Page
62
- 63
Page
68
- 69
Page
58
- 59
Page
66
- 67
Page
72
- 73
Page
56
- 57
Page
64
- 65
Page
70
- 71
Page
60
- 61
Page
76
- 77
Page
74
- 75
Con
tent
s
Lincoln Elite
Smart
Asian PansBoston Single Piece
Special Need Layout
Closet Selection(CC/Single Piece/WallHung)
Page
82
- 83
Page
78
- 81
Page
90
- 93
Page
86
- 87
Page
84
- 85
Page
88
- 89
Bath TubsShower Enclosures
Ceramic Shower TraysArcylic Shower Trays
BTSH10
BTSH12 BTSH13
BTSH11
BTSH07
BTSH02
BTSH05
BTSH09
1700 X 700 X 390 mm
900 X 900 X 1950 mm 900 X 900 X 1950 mm
800 X 800 X 150 mm
800 X 800 X 150 mm
800 X 800 X 90 mm
720 X 720 X 90 mm
1700 X 700 X 390 mm
MS CLAMP
MOUNTING CLAMP
(40X5)
Accesories & FittingsUrinals
InstructionsBath tubs &
Shower Enclosures
InstallationsSeat Cover
Page
94
- 95
Page
1
00 -
101
Page
96
- 97
Pa
ge
98 -
99
Page
1
02 -
103
Pa
ge
104
- 10
5
Andromeda
Andromeda (Egg)Suave contemporary design with style and substance to adorn any modern bathroom
Andro
med
a
EG WB FS1 EG BD EG WB WH1
EG TK
220
350550
35
57
45
210
810
510
340
Inlet is at the left of the tanks on bottom seen from front normally.
Please ask for side access holes if you wish to mount angle valves out the closet enclosure
15 Suitable for top mountingfasteners of seat covers.
Outlet nominal 102 (4”)Box rim flush
Side access holesONLY ON REQUESTfor mounting angle valves out side
As the back of the closet is completely closed for this model, all mounting shallbe completed before fixing. For seat cover, top mounting fasteners are preffered.Inlet hose shall be flexible with its control valve within the enclosure of closet.
730
450
355
275
410
805
175
190
380
160
360
550
35
300
67
45
510
435
340
237
200
This wash basin has no access from sides. Hence,recommended to fix angle valves within enclosed spaceof the basin. This basin can be accessed from bottomfor maintenance.
65
220
220
400
4535
575
380
Suitable for ½” inlet.
Technical DeTails
EG WC P
7
madrid
230
190
360
260
160
445
170
250
035045
016
850
375
820
385
695
315
555265
205
185
445
035045
555
170 017
Half Pedestal mounted with wood screws of2’’ x No. 10 & plastic plugs of size S8
madrid
ma
dr
id
Redefine your bathroom with a perfect blend of lines and
contours of this suite
MD TK
MD WB 551
Technical DeTails
MD WC S/P MD WB
MD WB 551
MD HP
9
WALES
WALES
WA
LES
A bold new shape to enhance the ambience of your private space
Technical DeTails
WA FP
WA WB 551
WA WB 551
WA HP
620 300
510
16
205
205
205
850
510
3545615
290
P-tr
ap
S-trap
190
WA WC S/P
WATK
11
VIENNA
VIENNA
VIE
NN
A
Redefine your bathroom with a perfect blend of lines and contours of this suite
VN WC S/P VN BDVN FP
VN WB 551
VN TK
123
190
205
820
465
45
35585
200
17mm rag bolt
150
255
345
408
400
805
695420
325 190
15 Suitable for top plug mountingfasteners of seat & cover also.
Box Rim Flush
35
45580
100
205
265
390
345
Use WC / Bidet Fixing Kit Type-ATo be ordered seperately.
P
S
110
Technical DeTails
13
VIENNA WALLHUNG
520
430
160
320
260
360
345
400
Box Rim Flush
Floor levelOutlet OD=102(4’’)
15O
135
95
55
180
150
Inlet ID=5525
X2 Mounting HolesO
Outlet OD=102(4’’)
40075
130
160
This basin is free standing basin and can befixed on any table top eitherStone, plastic or wooden surface.Produce the hole 75mm forinserting the waste hole for fixing basin on table top.
Waste hole 45
VIENNA WALLHUNGTechnical DeTails
SAMN WB
VN WH WC
VIE
NN
A W
ALL
HU
NG
15
Zurich
100
150
430
485
185
620
445
375
260
160
775
380
190
135
180
255
205
220
110
35 45
11 6KEY HOLES FOR FIXING ON TABLES
35
65
45
21012
265
390
16
485 Please use template for fixing on the table
35 45
D
B
C
G
A
E
F
A500 485 440
455 470390 820
820190190
218 50235 65580 580
B C D E F G
235
700440
330
BOX RIM FLUSHOutlet OD= 102mm
P
S
15
Suitable for top plug mountingfasteners of seat & cover also.
Available dual flush system also
100
Zurich (Trio)
Zuric
h
A bold new shape to enhance the ambience of your private space
TO BDTO FP
TO WB 581
TO WB 501
TO HPTO WC S/P
TO TK
Technical DeTails
17
Zurich
180435Box Rim
18
550220
Floor level
Inlet ID=55
Outlet OD=102(4”)
15mmSuitable for Top Mounting fasteners
555440
330
15O/
O/
O/ O/
Suitable also for top plug mountingfasteners seat covers Outlet OD=102(4”)
Inlet ID=55 Box rim flush
35
45
555
55
210
215
B
C
E
A D
150
A500 485 440
444 470390 280 50
300 65580 580
B C D EHalf pedestal mounted with wood screws of2”xNo.10 & plastic plugs of size S8
35 45
100
180
295
160
260
375
160
375
380
350
385
350
400
105
150
190
100
Zurich (Trio)
Zur
ich
Add premium to your bathroomswith a contemporary European style
TO WB 501TO WH WC
Technical DeTails
19
Florence
500
350
600
345 4535
Half pedestal mounted with wood screws of2”xNo.10 & plastic plugs of size S8
15
710
Suitable for top plug mountingfasteners of seat & cover also.
Available dual flushsystem also
S
Box rim flush
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
S=Dimension of centre of vertical outlet of EWC (S-Trap) from the wall when the tank is touching the wall=230mmP=Dimension of centre of vertical outlet of EWC (P-Trap) from the floor =190mm Out let ø102(4”)
P
65
220
4535
575
200
530
283
380
380
400
220
160
845
400
60
190
220
310
Florence
Florence
Pleasant Italian style for that feelof modern elegance
FL WC S/P FL BD
FL WB 551
FL HP
FL TK
Technical DeTails
21
SAVOY
SAVOY (Trebecca)
SAV
OY
Distinctive form and harmonious design to add charm to your bathrooms
TR WB 551
TR FP TR WC S/P TR WB CR1
TR TK
45
455555
35
This basin has provision for fixing round towel rails underneath.
200
230
525480375
375 (
TYP)45
35Key holes for mountinghalf round towel rail at bottom
Over flow hole 25
Max height of wash basin with pedestal : 870
585
285
(Normally pedestal is not used with this basin. Pedestal of “SARA”can be supplied on request to match with this basin)
150
230S-Trap
P-Tr
ap
430
160
67515
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
Box rim flush
Out let 102(4”)
Side access holesONLY ON REQUESTfor mounting angle valves out side
As the back of the closet is completely closed for this model, all the mounting shall be completed before fixing. For seat and cover, top mounting fasteners are preferred. Inlet hose shall be flexible with its control valve with in the enclosure of closet.
855
645
210
195
85
50
540
365
90
260
165 85
200
395
190
780
390
280
160
380
9017
Technical DeTails
23
Lincoln
Lincoln
Linco
ln
Bring home the timeless elegance of an era gone by with this vintage design
LN WB 601
LN WB 451
LN WC S/P LN BTW LN BD
LN TK
490
55
4306
15Outlet nominal 102 (4”) Box rim flush
260
G H
A B C D E F G HLarge wash basinCloakroombasin
600
450
440 310 65 195 640 815
330 195 50 150 640 760
C
DB
45 35
FE
A
240S-trap
680
430
15
Front flush handle available with ornate ceramic knob.Customers can choose color of the knobfrom our standard colors.
Top push button alsoavailable as choice
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
Box rim flush
Out let 102(4”)
570
41062
35
45
225
815
790
395
190
390
300
160
480
250
160
390
300
190 39
039
021
0
380
295
500
350
Technical DeTails
LN FP LN FP
25
Charente
Charente
Chare
nte
Add that touch of class to your bathrooms with this quintessential French design
CH WC S/P CH BDCH FP
CH WB 651
CH TK
SIZE A B C D580 580 480 185 215650 660 510 190 220
35 45
A
B
C
D
65
Normal inlet in our range is from bottom at theleft of the tank, seen from front side.Alternative arrangement will be available onspecification in the order.
Suitable for top plugmounting seat and coverfasteners also.
730
15Available with dual flush system also.
230
Outlet nominal 102 (4”)
Also available with trap distance of 195mmand mounting with brackets.Sales personnel to confirm the customer choice clearly in the orders to avoid confusion in trap distances at customer’s premises
Box rim flush
60
205
4535
600
875
405
275
160
800
190
395
380
280
225
385
Technical DeTails
27
Milano
215
550 basin and half pedestal also available.
35 45
665
15
710
Suitable for top plug mountingfasteners of seat & cover also.
Available also dual flush system
S
P
Box rim flush
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
S=Dimension of centre of vertical outlet ofEWC (S-Trap) from the wall when the tankis touching the wall=230mmP= Dimension of centre of horizondaloutlet of EWC (P-Trap) from the floor=190mm, Out let 102(4”)
65
220
4535
575
550 basin also available with half pedestalHalf pedestal mounted with woodscrews of 2”xNo.10 & plastic plugs of size S8
850
400
380
3055
0
290
400
220
160
283
380
215
870
30
519
35 45
665
519
210
205
Milano
Milan
o
Smoothly elegant contours embody this flowing design. Only the best for your bathrooms
MI WC S/P MI BD MI HP
MI WB 551
MI FP
MI TK
MI WB 651
Technical DeTails
29
Compact
Compact
Com
pac
t
Small is nice where space is precious. With a modern design and short pro-jection, this model will add value and space in your bathroom
CO WC S/P CO BD
CO WB 501
CO TK
4535
500400
145
420635
15
P-tra
p
Box rim flush
Out let 102 (4”)Suitable for Top plug mountingfasteners also
Normal inlet in our range is on bottomat the left of the tank, seen from front sideSuitable for ½” inlet.Alternative arrangement will be availableon specification in your order
Use WC/BIDET fixing Kit Type-A( To be ordered separately)
45 58535
230
35
450400
4520
7050 2-Tap holes
2Mounting holes.30x20mm.
typ
typ
50
370
235 83
5
190
370
275
160
190
395
790
380
395
160
200
145
60
105S-trap
Technical DeTails
CO FP
31
Modena
Modena (LINE)
Moden
a
LI WC S/P LI BD
LI WB 551
LI FP
LI TK
Time for transformation! Italian style and simplicity in this design to change the look of your bathroom 4535
550
170
Mounting Holes of to mount directlyon the wall Recommended fastener M10-Anchor bolt
30x25Half Pedestal
680430330
15mm seat mounting holes.
S-trap
P-tr
ap
250Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
Box rim flush
Out let 102 (4”)
45 57540035
230
70
460
65
850
205
205
440
775
395
190
370
270
160
265
360
215
385
Technical DeTails
33
Loire
Loire
LoireBring home that look of simple elegance with this classic suite adorned with elegant grooves
LO WC S/P LOHP
LO WB 451
LO BDLO FP
LO WB 581
LO TK
A
170
30x20280
E
D
C
B
30x20280
Note: The control valves(angle valve) for tap connection shall be out side the half pedestal.
45
35
Size450580650750
A469602670750
B308517545591
C150195195195
D280280280280
E415470470472
Half pedestal mounted with wood screws of2”xNo.10 & plastic plugs of size S8
Size450580650750
A469602670750
B308517545591
C150200197195
D - 860865875
E232232244235
45
A
B
210
C
E
D
450 mm wash basin is Cloak Room wash basin.this is mounted on wall with out pedestal.Half pedestal can be supplied for all sizes including 450mm size on request.
35
S
P
S=dimension of center of vertical outlet P=dimension of center of vertical outletof EWC (S-trap) from the wall=195 mm of EWC (P-trap) from the floor=190 mmoptional size of trap distance of 230mm is also available on request.
Normal inlet in our range is from bottomat the left of the tank, seen from frontside. Alternative arrangement will beavailable on specification in the order.
15
A
425
Suitable for top plug mountingfasteners also.
Available with dual flush system also.
Out let nominal 102Box rim flush
TRAP DISTANCE DIMENSION -A
195230
680740
230
35
60
45
590
370
250
160
800
390
400
405
390
Technical DeTails
35
Rhine
Rhine
Rhine
A perfect blend of form and finesse to suite your style.
RI WC S/P RI BDRI HP
RI WB 561
RI TK
S
P
Available withDual Flush system also
Suitable for Top plug mountingfasteners also
15
670
165
270
370
S= dimension of centre of vertical outletof EWC (S-trap) from the wall whenthe tank is touching the wall=150mmOut let 102 (4”)P= dimension of centre of vertical outletof EWC (P-trap) to floor=190mmOut let 102 (4”)
Normal inlet in our range is on bottomat the left of the tank, seen from front sideSuitable for ½” inlet.Alternative arrangement will be availableon specification in your order
400
780
Box rim flush
45 58035
220
220
380
395
210
475
45
440
50
35
560
25040
0
145
195
Two mounting holes 30 x 25for direct mounting on wall.Pl. Use M10 anchor boltswith flat washer and rubber cushion
Technical DeTails
37
DOMINO
DOMINO
DO
MIN
O N
EW
DO HPDO WC
DO TK
DO WB
70RIM
320
480455
560455
504535
S-trap
700440345
275
370
235
400
770
Superb aesthetics and simplicity come together to infuse that touch of class in your bathrooms
Technical DeTails
39
Danube
100
165
60
D
E
45
35A
C
B
Size450580650
450590665
A300509524
B140170176
C -843850
D185215215
E
A
15Suitable for top plug mountingfasteners of seat covers.
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
S
P
430
S=
P=
Dimension of the centre of the vertical outletof EWC(S-trap) from the wall when the tank istouching the wall=210mm.Optional size of 250mm trapdistance also availableDimension of the centre of the Horizondal outletof EWC(P-trap) from the floor=190mm.
Dimension-A
695
730250
210
Trap distance(S)
45 58035
230
415
375
210
395
160
293
390
820
400
8mm280
Danube
Dan
ube
This universal style with a large and elegant wash basin will complement your spacious bathroom.
DA WC S/P DA HP
DA WB 451
DA BDDA FP
DA TK
DA WB 581
Technical DeTails
41
Sara
Sara
Sara
Elegance and economy balanced beautifully to give you enhanced value
SA WC S/P SA CR WBSA BD
SA TK
SA FP
SA WB 551
49027045
150
270
42030 two tap holes only on request
35 one tap hole
453560
230
525370
42515
Open rim flush
775315
Suitable for top plug mounting fasteners.
Outlet nominal 102 (4”)
42015
Normal inlet in our range is from bottom atthe left of the tank, seen from front side.Suitable for ½” inlets.
Open rim flush
685235
Suitable for top plug mounting fasteners.
Avai
labl
e du
al fl
ush
syst
em a
lso.
Outlet nominal 102 (4”)
160
155
28530x25
45
35650
473
60
870
215
365
160
280
360 79
0
190
400
400
790
355
280
160
370
280
360 21
540
0
174
190
145
350
175
Technical DeTails
43
Sea Shell
66535
45
182
12565
S
690
15
430
S = dimensions of vertical ofvertical outlet of EWC (S-trap)from the wall when the tank is touching the wall=210mm.Out let 102(4”)
Suitable for top plug mountingfasteners of seat covers.
Available in dualflush system also
Box rim flush
Normal inlet in our range is from bottom at theleft of the tank, seen from front side.Suitable for ½” inlet. Alternativearrangements will be availableon specification in your order.
45 578
220
35
524
855
405
160
293
380
810
400
215
395
377
Sea Shell
Sea
Shel
l
Quintessential nature in this sea shell design for those who cherish a natural touch
SH WC S/P SH BD
SH WB 651
SH TK
SH FP
Technical DeTails
45
Bali
Bali
668
200
850
60
455
395
160
365
795
400
280
550
15 415320
690
35
45
160
155
230
30x20
Dimensions in mm
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
Trap distance 110 also available
Bali
Technical DeTails
SA FP BA WC
SA WB 551
BA TK
47
Aquasave4 x
2.8 F
lushing
Aqua
save
Aquasave
475
870
215
60
35650
280
30x20
45
160
155
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
430
660
15
160
295
380
790
190
390
340
Technical DeTails
AQ WC P
SA WB 651AQ TK
SA FP
49
Greenwave4 x
2.8 F
lushing
Green
wave
Greenwave
475
370
160
295
380 77
5
190
390
870
215
60
35650
280
30x20
45
160
155
15430
665
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
Open rim flush
GREENWAVE
SA FP
SA WB 651
GW WC P
SA TK
51
Preserve
4 x
2.8 F
lushing
Preserve
Preserve47
5
870
215
60
35650
280
30x20
45
160
155
Mounting Holes to mount directly on the wall Recommended faster M10-Anchor bolt
Open rim flush
430
370
380
760
295
190
660
390
160
O 15 mm
PRESERVE-LOW FLOW FLUSH EWC(P-TRAP)Dimensions in mm
Technical DeTails
SA FP
SA WB 651
CR WC P
RM TK
Pres
erv
e53
Children
Children
Children
Naughty and cute! Fun in wellness for the little ones….
165
280
D
C
120 Half pedestal
Note: The control valves(angle valve) for tap connection shall be out side the half pedestal.
Half pedestal mounted with wood screws of2”xNo.10 & plastic plugs of size S8
15320
435
690
470S- Trap230
Normal inlet in our range is from bottom at theleft of the tank, seen from front side. Suitable for ½” inletAlternative arrangements will be availableon specification in your order.
Box rim flush
Out let 102(4”)
ASize A B C D
650 650mm 470mm 215mm 475mm
550 565mm 455mm 200mm 455mm
500 520mm 405mm 200mm 440mm
45
35
B
60
710
300
360
160
265
365
Technical DeTails
SC WC BRS
SC TK
SC WB 551
SC HP
55
Loire Wall Hung
Flush system options:1. Inline flush valve (1-1/4” pipe line to be made from storage tank) 2. Low level hide away cistern with small push button3. Hide away cistern with complete frame & large push button
180
Mounting with M12 anchor bolt, plain washer, nylon bush and rubber cushion.
270
160 14
044
100
375370
33015
100 425
525
Also suitable fortop plug mounting fastenersof seat & covers
Note: Please always use soft washersbelow the head of mounting bolts to preventcracking of ceramic ware due to overtightening of bolts.
X2 Mounting holes58 Inlet ID
Outlet OD = 102
Box Rim Flush
25
Loire Wall Hung
Loire
Wal
l Hun
g
Technical DeTails
LO WH WC
57
Victory wall hung
Victory wall hung
Vic
tor
y w
all
hu
ng
( Hole 11, slot width7)Key
Bottom view
Waste hole 45 Overflow hole 25
175
190
225
380
595
This basin is free standing basin and can be fixed on any table top eitherStone, plastic or wooden using M6x120 pan head screw with nut.Basin has key hole provision at the bottom.
O 55 Inlet ID305
58
25
570
160
360
230 13
510
2
355
430140
OO 15 mm X2 Mounting Holes
Box Rim Flush
Outlet OD = 102
Technical DeTails
VI WH WCTU WB
59
Lounge wall hung
O 55 Inlet ID
180
535435
325
100
370
135
255
145
360 95
55
25O 15 mm X2 Mounting Holes
Box Rim Flush
Outlet OD =102
O
Bottom view
480
200
185
47035 45
290
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut.Basin has key hole provision at the bottom.
Lounge wall hung
Loun
ge W
all hu
ng
Technical DeTails
CA WBOL WH WC
61
FIFA Wall Hung
O 55 Inlet IDO 25
O 15 mmX2 Mounting Holes
Box Rim Flush
Outlet OD 102
180325
100
37010
045
140
255
435
535
160
350
Bottom view
Over flow 25Waste hole 45
430
140
135 16
5
( Hole 11, slot width7)Key
This basin is free standing basin and can befixed on any table top eitherStone, plastic or wooden usingM6x120 pan head screw with nut.Basin has key hole provision at the bottom.
FIFA Wall Hung
RO WBFI WH WC FIFA
Wal
l hun
g63
Domino wall hung
Domino wall hung
Dom
ino
wa
ll h
ung
515
150
160
230
375
140
95
310
55
35
510
295
5525mm
180
200
45
555Mounting Holes
Technical DeTails
DO WHDO WB
65
Milano wall hung
Milano wall hung
Mil
ano
wal
l h
un
g
15
550 basin also available with half pedestalHalf pedestal mounted with woodscrews of 2”xNo.10 & plastic plugs of size S8
3055
0
290
35 45
665
520
210
205
280 30x20
95135
380
265
Technical DeTails
MIWB 551
MI FP MI WH WC
67
Free Standing Basins
San marino
40075
130
160
This basin is free standing basin and can befixed on any table top eitherStone, plastic or wooden surface.Produce the hole 75mm forinserting the waste hole for fixing basin on table top.
Bottom view
Bottom view
Over flow 25Waste hole 45
430
140
135 16
5
( Hole 11, slot width7)Key
This basin is free standing basin and can befixed on any table top eitherStone, plastic or wooden usingM6x120 pan head screw with nut.Basin has key hole provision at the bottom.
Bottom view
175
190
225
380
595
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
Bottom view
45 35
25
460
230
200
195 245
Overflow hole ( Hole 11, slot width7)Key ( Hole 11, slot width7)Key Over flow 25
Waste hole 45
Waste hole 45
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut. Basin has key hole provision at the bottom.
480
200
185
47035 45
290
This basin is free standing basin and can be fixed on any table top either Stone, plastic or wooden using M6x120 pan head screw with nut.Basin has key hole provision at the bottom.
445
035045
160170
555
0160
075
This basin is free standing basin and can befixed on any table top eitherStone, plastic or wooden surface.Produce the hole 75mm forinserting the waste hole for fixing basin on table top.
Steppedoval
roundmadrid
Square
Free Standing Basins
Free
Sta
ndin
g Ba
sins
FS WBR 431MA WB 551
SAMN WB 401CA WB 471
TU WB 601
FS WBR 461
Technical DeTails
69
Vanity Basins
16
16
20 RIM
580530
565520
45
440 22
5
385
135
125
480 20
0
70
19037
542
5
Paper template for cutting profile on the table top can be provided on request. Mounting is done with clamps fixed on the bottom of the rim. Clamps are fixed at the bottom of the table top stone by drilling with diamond drill and filling epoxy in the hole.
35 45
35 45
20
65
480
215
30
30
190
235
445
595
575
480
Paper template for cutting profile on thetable top can be provided on request.
RIM
45
25
Paper template for cutting profile on the table top can be provided on request. Mounting is done with clamps fixed on the bottom of the rim. Clamps are fixed at the bottom of the table top stone by drilling with diamond drill and filling epoxy in the hole.
35 45 485
225
70
50
20
585
455
200
25
There are two models of regal wash basin.One with skirt and another with out skirt.The difference is only the height of the skirt.Paper template for cutting profile on thetable top can be provided on request.
Paper template for cutting profile on thetable top can be provided on request.
Vanity Basins
Vani
ty B
asin
s
moSel
reGal
roYal
ardeCH under Counter
pearl under Counter
AR UC
RY CT
RG CT2
MO CT
AR UC2
Technical DeTails
71
Wall Mounting Basins
Wall Mounting Basins
Wal
l Mou
ntin
g B
asin
s
4535
545470
345
200 20
0
190
105
185
50
Key holes for fixing Mounting holesTowel rail for screws
8
30x20
Mounting Holes to mount directly on the wall Recommended fastener M10-Anchor bolt
This basin has provision for fixing round towel rails underneath.
45
395
50
200
35
640
455
200
This is wall hung basin and no pedestal or half pedestal.Waste fittings will be visible from front. Hence chrome plated bottle trap is preffered.
This basin is directly mounted on the wall using two mounting holes of size 16 Pl. Use 2no. M10 anchor bolts with flat washer & rubber cushion
This basin is directly mounted on the wall using two mounting holes of size 16 Pl. Use 2no. M10 anchor bolts with flat washer & rubber cushion
56
200
This is wall hung basin and no pedestal or half pedestal.Waste fittings will be visible from front. Hence chrome plated bottle trap is proffered.
150
515
510
3545
4535280+10
605505
465
290
65
130
50
180
160
65
30x20 Mounting Holes to mount directly on the wallRecommended fastener M10-Anchor bolt
200+10
90+5 180
200
4535
This basin has provision for fixing round towel rails underneath.
200
455555
540
365
50
85
19
52
05
16mm
30x20
30x20
30x20
Technical DeTails
manHattan
SavoY
GreenwiCH
domino
oxford
MN WB 551
SA WB 551
GW WB1
DO WB 511
OX SQ WB 601
73
Semi Recessed Basins
10
Mounting holes
4535
390
110
170
500 155
235
Please use template for fixing on the table.
35 45
55
70
200
2551013
0 150
Please use template supplied with this basin to fix on table.
SIZE A B C D500 500 370 425 170560 565 455 455 180
AB
C D
Please use templates for fixing on table.
Mounting holes
Please use template for fixing on the table
4535
60
475
540
185
140
20
Mounting holes
235
195
550
470
45
15 30
210
170
23016
0
35 (for one tap hole only)
Mounting Holes
Template Drawing will be suppliedalong with this wash basin for cuttingthe cabinet matching the washbasinrecessed profile.
Two tap holes also available on request.Please also specify whether waste plugchain stay hole is required or not.
430
45
18
145
142
10
Mounting holes
130
200
185
2354535
60
475
550
Please use template for fixing on the table.
35 45
55 150
380500
2251013
0
425 15
017
5
Over flow Hole is placed inleft of the .side Basin
35
65
45
445
21012
180
135265
390
16
485 Please use template for fixing on the table
Semi Recessed Basins
Sem
i Rec
esse
d Ba
sins
SYmpHonY
ZuriCH
round
danube
GreenwiCH
rHone
loire
Sara
modena
Technical DeTails
TO SEM WB
RO SEM WB
LO SEM WB
SA SEM WB
LI SEM WB
SY SEM WB
RO SEM WB
GR SEM WB
DA SEM WB
75
Back to Wall Closets
Back to Wall Closets
Back
to W
all C
lose
ts
160
160
O 15 mm O 15 mm
P
P
S
O15 mm
O15 mm
Outlet ODO102
370
370
190
118
270
530
530 495
420
58 525
100
395
400
310
395
375
190
190
345
335
555440
260
395
275
245
395
190
385
370
270
160
160
160
160
Inlet ODO56
Box Rim FlushSuitable also for top plug mountingfasteners seat covers
Suitable also for top plug mounting‘S’ Trap (Vertical Outlet) = 115mm
Mounting holes for fixingLWC ‘P’ Traps only
Mounting screws forLWC ‘S’ Traps only
2- Mounting holes.Recommended fastener: 3 inchs x no:12 wood screws(Brass Preferred) with fischer plug.
560 for ‘S’ Trap & 530 for ‘P’ Trapfasteners seat covers
holes for Seat & Cover mounting
O O
O
15 mm Suitable also for top plug mountingfasteners of seat covers
This closey is fixed with mounting brackets.Please order seperately
Mounting withEWC mounting bracket kit
Inlet ID
OutletOD
58
100
O
O
Inlet ID
OutletOD
Mouting holes for fixing EWCwith brackets for ‘P’ Traps only.Please order brackets seperately.
15O/Suitable also for top plug mountingfasteners seat covers Outlet OD=102(4”)
Inlet ID=58 Box rim flush
Technical DeTails
daniela
line
loire
Sara
trio
rHone
RI BTW
LI BTW
LO BTW
SA BTW
TO BTW
RO BTW
77
BACT TO WALL WITH LL CISTERN FOR Special Need
Special Need WALLHUNG
BTW/LLC Pan For Special Need
Back Rest
LL Cistern For Special Need
Wallhung WC
Brackets for LLC
Push Button
Wash Basin
Wash Basin with Ceramic Blank
Wave Fitings with Special Long
Spatulla lever
Concealed Cistern Wave/ European make
Spatulla Lever Tap
Spatulla Lever Tap
Closet Fixing Screws/Wash Basin Type B
Fixing Kit & Ceramic Blank
Wash Basin Type B Fixing Kit
Hinged Rail
Hinged Rail
PP Soft CloseSeat Cover
UK made HD SC with Steel Hinges for
Special Need
Grab Bar
Grab Bar
All in one pack
All in one pack
1m 1m
348
220
50339
FFL0
1000
1170
R
R½
½
140 200
400-100
Dimensions in cm
O 16 Inlet ID
495
445
160
290
370
O 102 Inlet ID
190
457
Installation Lay out for Back To Wall Physically Handicapped Persons
850
500
2200
390410
500 20
035
0
700
720
to 7
40
800
700
455
1500
1000
150
370
250
200
1000
850
500
360
480
250
850
750+140 to 160
600-700
1000
MINMAX
Including Seat Cover
Special Need LAYOUT
BACT TO WALL WITH LL CISTERN FOR Special Need
Special Need WALLHUNG
Special Need WALLHUNG
Spec
ial
Nee
d P
RO
DU
CT
Special people, special needs. Safety and convenience with elegance and style for the loved ones that need it most
100
Flush system options:1. Inline flush valve (1-1/4” pipe line to be made from storage tank) 2. Low level hide away cistern with small push button3. Hide away cistern with complete frame & large push button
180
160
Mounting with M12 anchor bolt, plain washer, nylon bush and rubber cushion.
OD 102
Installation Lay out for WallHung Physically Handicapped Persons
850
525
2200
365385
500
200
350
700
720
to 7
40
800
700
395
1500
1000
150
370
250
200
1000
850
500
480
85
250
850
750+140 to 160
600-700
1000
MINMAX
Including Seat Cover
79
NEW COUPLED CLOSET FOR Special Need
Special Need COUPLED CLOSET
Coupled Closet
Coupled Closet
Ceramic Blank
Ceramic Blank
Wash Basin
Wash Basin
European fittings with Push Button
Wave Fitings with Special Long
Spatulla lever
Spatulla Lever Tap
Spatulla Lever Tap
Closet Fixing Screws/Wash Basin
Type B Fixing Kit
Closet Fixing Screws/WashBasin
Type B Fixing Kit
Hinged Rail
Hinged Rail
Grab Bar
Grab Bar
Front Open PP Soft Close SC
For Special Need
PP Soft Close SC
All in one pack
All in one pack
335425
750
15
Suitable also for top plug mounting fasteners of seat & cover
9 mm
Box rim flush
.
360
240
475
825
46016
0
190
850
750
2200
150
180
500 20
0
350
700
720
to 7
40
800
700
825
1500
1000
150
360
250
200
1000
850
500
460
480
250
850
750+140 to 160
600-700
1000
MIN
MAXIncluding
Seat Cover
Spec
ial
Nee
d P
RO
DU
CT
Special Need LAYOUT
NEW COUPLED CLOSET FOR Special NeedSpecial Need COUPLED CLOSET
Special people, special needs. Safety and convenience with elegance and style for the loved ones that need it most
Two inlet holes as choice.27
440
335
130
190
75016
29
0
15
5
52
0
38
5
19
0
840
440
46
0
74
0
With o
ut
se
at
Mounting holes of dia: 10mm
two on each side.
To mount with
mounting bracket kit.
This closet is available with horizontal ‘P’ trap.
Flexible conversion bend can be supplied
if required for connection through floor.
With
se
at
Box rim flush
Out let 102(4”)
48
0
81
0
500
700
80
0850
1000
72
0 t
o 7
40
Wash Basin
750+140 to 160
250
70
0 850
600-700
View on A-A
View on B-B
Colostomy Bag
Changing Shelf
for Ambulant Users950 mm above Floor Level
15
00
10
00
AA
35
05
00
15
0
200
200
250
850
1000
2200
750
385
MIN 140MAX 160
B
B
CCPull Rail
Fixed to
Door
Typical Installation Plan
Hinged
Support
Rail
81
Boston Single Piece
Boston Single Piece
Boston Single Piece
Bos
ton
Sing
le P
iece
Give your bathroom an American look by using the single piece water closet with integral tank.
290
435740
Normal Inlet for inch connectionon left of tank seen from front.Alternative Right inlet can be given on request.
Dia 15 mm holes Suitablefor top Plug mounting
This closet is Siphonic Closet.Water Rises in the bowl prior to flush and emptied by Suction actionTrap outlet size is 60mm OD and 45mm ID.Flushes from rim with out additional rim flush inlet valve.
395
160
435 29
539
5
590
21
Technical DeTails
BO WC ST
83
Lincoln Elite
Lincoln Elitea touch of traditional class and grandeur to usher in royal elegance into your bathrooms
Lin
coln
Elit
e
Technical DeTails
260
640
825
440
205
310
500
45 35
195
65
Chain Hole
600
30x20 280
55
395
770
190
4-mounting holes
680
485
160
300
390
430
15
Box rim flush
Front flush handle available with ornate ceramic knob.Customers can choose color of the knob from our standard colors.
LN EL WC S/PLN EL FP
LN EL WB 601
LN EL TK
85
Smart
Smart
Sm
art
a mix of tradition and contemporary minimalistic style to give a retro look to your private space
4535
590
200
485
640
840
15
425
700
Open Rim Flush
380
160
300
375
360
820
410
190
40
Technical DeTails
LS SM WC PT
LS SM TK
LS SM FP
LS SM WB 590
87
asian pans
Foot rest raised fordeep pan only
50
30
390
A
B
55C
100
Corners are straight for shallowpan and rectangular pan
Model A B CDeep 540 435 295
Medium 495 405 210
Shallow 500 400 135
Corners cut fordeep & medium pans
540 435 295Rectangle
395
100
854015
3210
1025
50
230 30
32
295
212
70
180
205
Normal inlet hole is at the left side of the tank and operating lever is at the right side seen from front of the tank. Holes can be interchanged on special request in the customers purchase order.Two holes of dia 10mm are for retention purpose only. These shall not be used for bearing the load of the tank. Tank should rest on mounting brackets for increased safety.Overflow is through the outlet valve centre tube and over flow water on failure of inlet valve disc harges into the pan.
asian pans
asian pans
asia
n pa
ns
ASWCDP
ASHT
Convertion Bend ‘S’
Convertion Bend ‘P’
Technical DeTails
89
Andromeda Madrid Wales Vienna
Zurich Florence Savoy Lincoln
Coupled Closet
Milano Compact Modena Loire
Rhine NewBali Danube Sea Shell
Coupled Closet
Clo
set S
elec
tion(
CC
/Sin
gle
Piec
e/W
allH
ung)
91
Coupled Closet
Domino New
Children’sPreserveGreenwave Smart
Charente Sara Aquasave
ZurichVienna Domino
Boston
New york
Alps
Loire
Wall HungSingle
Piece
Fifa Victory Lounge
Clo
set S
elec
tion(
CC
/Sin
gle
Piec
e/W
allH
ung)
93
Urinals
URBWL
Bowl With SpreaderUREC
Dunny EcoURDN
Urinal Dunny ConcealedURFB
Wave Flat Back
URPT
410
300
235
280300 315 26 22
90
130
40340
/
Hole for water inlet through0.5 cock please see note: 2
Opening at top
Hole at bottomfor auto siphonmounting
URINAL-TANK
BOWL
215
100
270
365
75
WAVE FLAT BACK
DUNNY ECO
URINAL-DUNNY
Mounting hook250
140210
Please see note: 1
Auto siphon oflengths from 6” to 8”
Auto siphon outlet size of 1”flush pipe size of 0.25”
O 8 mm
O 16 mm
O 65 mm
O 22 mmInlet dia
O 50 mm
225
90
280
205435
360
418
O8 mm
O15 mm
O65 mm
O
225
6050 mm
285
215345
535
Urinals
Urina
ls
URTK URPTUrinal PartitionUrinal High Level Tank With Auto Siphon
*Urinal Tank Fittings / Auto syphon / Spreader to be ordered seperately
Technical DeTails
95
Bath Tubs
Spa
Corner Square Corner CurvedRelax
Shower Enclosures
BTSH10
BTSH12 BTSH13
BTSH09
1700 X 700 X 390 mm
900 X 900 X 1950 mm 900 X 900 X 1950 mm
1700 X 700 X 390 mm
Bath
tub
s an
d Sh
ower
Enc
losu
res
Square
Curve
Corner Curved
Ceramic Shower TraysArcylic Shower Trays
BTSH11
BTSH07BTSH02
BTSH05800 X 800 X 150 mm
800 X 800 X 150 mm800 X 800 X 90 mm
720 X 720 X 90 mm
97
LOUNGE
SARA/AQUASAVE/GREENWAVE/PRESERVE/SMART
LOIRE/BALI/MODENA/RHONECOMPACT/RHINE/DOMINO/DANIELA
VIENNA/ZURICH/VICTORY MADRID/WALES/FIFA
MILANO/BOSTON/SAVOY/DANUBE/FLORENCECHARENTE/ROMA/ANDROMEDA/LINCOLN
PP Soft Close Seat Cover
LOIRE/BALI/MODENA/RHONECOMPACT/RHINE/DOMINO /DANIELA
LOIRE/BALI/COMPACT
Range of Seat Covers
Ran
ge o
f Sea
tCov
ers
MILANO/BOSTON/SAVOY/DANUBE/FLORENCECHARENTE/ROMA/ANDROMEDA/LINCOLN
SHELL ROMA
PP Non Soft Close Seat Cover
HD Non Soft Close Seat Cover
Special Need Seat Cover
UK MADE HD SC WITH STELL HINGES FOR SPECIAL NEED
FRONT OPEN PP SOFT CLOSE SCFOR SPECIAL NEED
PP SOFT CLOSE FOR NEW COUPLED CLOSET FOR SPECIAL NEED
PP SOFT CLOSE/ NON SOFT CLOSE/ HD NON SOFT CLOSE
FOR SPECIAL NEED WALLHUNG
99
1m 1m
348
220
50339
FFL0
1000
1170
R
R½
½
140 200
400-100
Dimensions in cm
Robe Hook
Soap Dish - Big Soap Dish - Small
WAVE DUAL FLUSHGEBRIT MAKE DUAL FLUSH WAVE SINGLE FLUSH
HIDE AWAY FITTINGS FOR WALL HUNG
WAVE - HIGH LEVEL FITTING
Toilet Paper Holder
Towel Rail
Danube Shelf
ACWHACSDSL
ACWHACDASH
ACWHALPH
ACWHACTESF
TKFT0031
TKFT044
TKFT003TKFT002
TKFTO16
ACWHACRH
Acce
ssor
ies &
Fitt
ings
Accessories & Fittings
FITTING FOR BOSTON SINGLE PIECE
WIRQUIN(FRENCH MAKE) DUAL FLUSH
SHATTAF
METAL SHATTAF
WALES CHROME MILANO CHROME SARA CHROME
LOIRE WHITE SARA WHITE
TKFT020
TKFT015
PEC Connector Bend
Rubber Bung
S-Trap Ceramic Convertion Bend
APMTSH
APCRWASH APCRMISH APCRMASH
APWHLOSH APWHSASH
101
INLET VALVES
1. Normally all our fittings come with inlet valve to match with ½” connectors. If the connections in the building have 3/8” for any reason, a reducer of ½” x 3/8” shall be used.
2. All our close coupled cisterns come with the inlet at the bottom at the left of the tank seen from front of the closet. If the inlet is required on right side of the tank special mention shall be made in the order. As the tank with right inlet is not kept in stock, a lead time of at least 2 weeks shall be allowed for delivery.
3. Provision of an angle valve of good quality before the Cistern inlet is very important for maintenance of closet cisterns
4. Use of flexible connector with Stainless Steel Braiding is more useful than using rigid connectors of copper pipe etc. for ease of maintenance and reliable leak proof connection. It will be very difficult for the plumbers to do any repair work on the cistern inlet if the rigid pipes are used. They break in few operations and also damage the thread on inlet valves.
WATER PRESSURE
All our cistern fittings sets have inlet valves with servo operation. The advantage with this kind of valves is that the valves remain open with full flow until final level is reached. This will ensure quick refilling of the tank after flushing operation. The normal float lever operated valves slowly reduce the flow rate as the level in the tank rises. This causes very slow refilling of the tanks.
However, all the servo operated valves need minimum of 3 meters of water head above the Cistern level. If the overhead tanks supplying water to the cisterns is less than 3 meters, the inlet valves either do not open at all or if they are open, they will not close again.
It is therefore very important to check pressure available at the cistern inlet before asking for these fittings.
If the pressure is definitely less due to improper planning of pipelines, position of over head tanks or due to the proximity of the overhead tank (like the last floor in a multistorey building) only the float lever operated valves shall be chosen. Please mention this to our sales staff for proper advice.
WATER PIPING
The piping from over head tank to the Cisterns shall be at least one size higher than the Cistern inlet size. For example the angle valve used for connection to cistern is ½”, the piping from overhead tank to the valve shall be at least ¾”. If more branches are taken from the same pipe the pipe size shall be even bigger like 1”.
It is tendency of some plumbers to use only ½’ size pipe from overhead tank to all the points to reduce cost. This will seriously impair the function of all the inlet valves. If the servo operated inlet valves are used with such slow flow rate line they will not stop when the level is reached in the cistern. The float lever operated valves take very large time to refill thetank.
If the same pipe is used for supply form overhead tank to all the floors in multistorey buildings, the bottom most floor get very good pressure and the topmost floor do not get any pressure when the bottom floor taps are opened.
It is always preferable to use different branch piping from the overhead tank to each floor.
HEATING OF WATER IN THE PIPES DUE TO SUNLIGHT
If the water piping from over head tanks to the toilets is left exposed to direct sunlight, the water temperature in the pipelines rises to as high as 80C during summer. This water when entered in the cistern will spoil all the plastic and rubber parts of the cistern fittings. It is therefore recommended to conceal all the pipe lines with out exposure to direct sunlight.
USE OF CHEMICALS
Excessive chlorination of water used for toilets will spoil all the plastic and rubber parts of the cistern fittings. Only moderately chlorinated water shall be used for toilets for prolonged life of toilet fittings.
insTRUcTiOns FOR WaTeR clOseTs anD cisTeRn FiTTinGs
ins
TR
Uc
TiO
ns
103
SCALING OF WATER IN THE CISTERNS
Water with heavy calcium content will slowly scale and form deposits in the cistern.The Inlet valve in our Cistern fittings set also comes with a filter. This filter also may get clogged in due course due to scaling.
It is necessary to clean this filter at the bottom of the inlet valve by opening the connection to the inlet valve. The filter can be cleaned by dipping in mild toilet cleaning acid.
The scaled deposits in the cistern and on the flush valve cause the flush valve to continuously leak. It is necessary to add small amount of mild toilet cleaning acid to the water in the cistern and flush 4 to 5 times so that all the scales are completely dissolved. This operation shall be done only when necessary. Frequent cleaning of cistern parts with acid or chemicals will spoil the plastic and rubber parts of cistern fittings.
FIRST FLUSHING OF OVERHEAD TANKS AND PIPES
All the pipes in building construction collect lots of dust and sand during the process of installation and storage. The over head tanks also may collect sand and dirt during installation and storage.
If the dust and sand from the overhead tank and pipes enter the cistern fittings, the fittings will not function as the fine sand will block the filters, small holes of servo mechanisms etc. The sand also will come in between the rubber seal and seats of inlet and outlet valves and cause continuous leakage.
It is important to flush all the pipe lines and over head tanks properly with enough water before connecting the pipes to cisterns.
ADJUSTMENT OF CISTERN WATER LEVEL
All our cistern fittings come with adjustable floats to correctly adjust the level in the cistern. A red coloured Lock is provided on the stem of the inlet valve. Press this down to hear click sound. Disengage the threaded bar from the float by turning it thinner side to the front side. Pull the Float chamber up or down according to the level required. Lock the float mechanism on the stem with the red lock. Re-engage the float screw in to the float by keeping it pressed down. The float shall freely lift and fall after engaging the screw in to it. If this is not free, water will continuously leak even after the level is reached in the tank. In case of doubt please ask our representatives in your area. They shall assist you in correctly adjusting the level.
OUT LET VALVES – DUAL FLUSH AND SINGLE FLUSH
There is a choice of out let valves regarding flush operations. We can supply cistern fittings with only with single flush or with Dual flush valves also.
Dual flush valves are useful where toilets are also used as urinals in saving water. In these fittings one low flush button and one high flush button are provided separately. Pushing of low flush button discharges small amount of water (3 or 4 liters) when the toilet is used as Urinal. Pushing of High volume button ensures full discharge of water (6 or 8 liters) when the toilet is used in normal way.
The discharge volume is also adjustable in our fittings. Please refer to the instructions sheet supplied with the fittings.
Dual flush valves save water where the toilets are often used only for urinal purpose. However, both plumbers and end users must fully understand about their function and use properly. Please ask for detailed presentation if needed.
STORAGE OF FITTINGS BEFORE INSTALLATION
All our cistern fittings contain Plastic or Rubbers parts. These parts are sensitive to direct sunlight. The Plastic parts become brittle when kept under sunlight for longer time. Application of even little tightening force will break the parts after exposure to direct sunlight. Rubber parts become hard due to heat and loose their sealing abilities causing leakages after installation. It is therefore recommended to keep the fittings inside their cartons until use and store them under shade.
Also, if the fittings are stored along with other building materials, the dirt and sand enter the parts and damage the parts. The sand and dirt come in the sealing areas and cause leakages. Also, Plastic parts can get compressed and loose their shape. Care shall be taken in storing the fittings to avoid damages.
USE OF PROPER TOOLS AND PROPER TIGHTENING FORCES
Only proper tools shall be used in tightening the nuts on inlet and outlet valves of Cistern fittings. Using pipe wrenches and over tightening them causes damages to the fittings. Fittings crack due to this and leak in usage.
USE OF SILICONE SEALANT
All the fittings are supplied with proper rubber sealing washers. Proper usage and sufficient tightening will ensure no leakages in all cases. If there is a leakage, there must be serious problem with some parts of the fittings or the Ceramics ware. Please investigate and resolve the problem. Silicone sealant can react with the plastics and cause slow damage. Also, the loose streaks of silicone can be carried to the small holes in the inlet and outlet valves and block them. Avoid using silicone sealant on any plastic parts. If required this may used only for dressing the gaps between the Ceramic ware and walls or floors.
CARE IN HANDLING CABLE OPERATED OUTLET VALVE FITTINGS
Some of our Fittings come with Cable operated outlet valves. Care shall be taken during handling of cable to prevent permanent bending of cable. The permanently twisted cable will not move freely in the cable guide tube and the flush valves will not close properly after flush due to this. Even during the maintenance, the shall not be allowed to hang on the cable, the cable shall be detached from the knob for removal of the lids.
SELECTION OF WATER CLOSETS
The S- Trap Close coupled water closets perform well in flushing compared to any other types. S- Trap closets need pre-planning of the drain piping in the floor. P- Trap Closets are very useful for quick and easy installation as the drain pipe can be taken out of the wall by making the hole as and when required without much pre-planning.However, it is always required to keep the closet with its back to the outer v s. Any other place other than outer wall requires long ducting.Where there is limitation of space, Back to wall closets can be selected.Wall hung closets allow cleaning access to all the toilets area.However, back to wall or wall hung closets shall be chosen where there are plumbing skills and engineering support is available as the cisterns need to be kept inside the walls.
CISTERNS FOR BACK TO WALL AND WALL HUNG CLOSETS
There are several options of cisterns for Back to wall and Wall closets available.
Concealed Cisterns with ready made frames, Only concealed cisterns, In line flush valves etc., are the options available.Concealed cisterns with ready made frames are the best choice as they come along with complete set of items including outlet pipes, inlet pipes fixing fasteners, dual flush tanks with large and styled push buttons. Plumbers can directly install without the need to purchase any other
items.
The concealed cisterns are assembled inside the recess in the brick wall and front side is panelled with waterproof plywood or Plastic panels etc. If required these panels also can be covered with tiles to merge with the remaining walls.
In line flush valves are also of good option. However, these valves come with 1 ¼” connection. The piping from the Over head tank also shall be of same size for correct flushing in this case. Smaller piping of 1/2” of ¾” will give improper flushing.
SEAT AND COVER FIXING FOR THE BACK TO WALL CLOSETS
Back to wall Closets and some models of Close coupled closets come with their back side completely closed. There is no access for fixing of seat and cover screws in these closets after installation. Only special top mounting fasteners shall be used for the seat covers of such closets.Even the inlet and outlets for such closets shall be fixed with slide on rubber seals or bushes. Otherwise maintenance will be very difficult.
MOUNTING OF EUROPEAN WATER CLOSETS
There are two different methods of mounting of European water closets. One method is using screws directly in to the mounting holes. In another method, first a brackets are fixed to the floor and screws are inserted from the side of EWC and tightened. The mounting method is fixed for a model and the model drawing includes the detail of mounting method. Please check with our sales personnel in case of doubt.
ins
TR
Uc
TiO
ns
105
insTallaTiOn OF Wash Basin WiTh scReW MOUnTinG (Type - a)
1. Wash basin is mounted on its pedestal and hole places are marked on the wall.
2. 12mm. Hole is drilled on marked places and O12 plug is mounted.
3. The screw is squeezed in to the plug4. Wash basin is mounted on to plastic bushings
and then M10 nut is tightened with a spanner.
PARTS LIST
insTallaTiOn OF Wash Basin WiTh OUT MOUnTinG scReWs (Type - B)
Instructions for Installation
1. Place the wash basin against the wall and mark the place on wall where mounting brackets are to be located.
2. Drill two mounting holes of O20mm of minimum 85 mm depth at a centre distance as per the table below.
Wash Basin Model Hole Centre distance -B
Danube, Rhine- 580mm 190mm
Danube, Rhine- 650mm 260mm
Danube, Rhine- 450mm 165mm
Charente 580 & 650mm 80mm
Sea Shell 260mm
Andromeda wall hung basin 000mm3. Insert the Fischer sleeve in to the holes.
4. Now take the M12 Bolt and insert the mounting clamp and plain washer on the bolt and screw the bolt in to the FICHER SLEEVE such that the bottom portion of clamp just touches the wall.
5. Now take the wash basin and place it against the wall above the clamp portion and slide it down till it rests snugly between the wall and the rubber pads of the clamp.
6. Now tighten the bolts fully to get firm mounting of the basin. Avoid over tightening, which can result in\damaging the wash basin.
ins
Tall
aT
iOn
M8
107
insTallaTiOn OF clOseT anD BiDeT (Type-a)
PARTS LIST
insTallaTiOn OF clOseT anD BiDeT (Type-B)
PARTS LIST
ins
Tall
aT
iOn
109
insTallaTiOn OF Wall hUnG clOseT / BiDeT
PARTS LIST
insTallaTiOn OF anDROMeDa WB (Type-B)
1. Place the brackets against the wall and mark the place on wall where wash basin is to be fixed.2. Drill four mounting holes of 15mm dia of minimum 50mm depth at centre distance of brackets 230mm from
floor 590mm.3. Insert the Fischer sleeve in to the holes.4. Now take the M-8 bolt and fix the mounting brackets on the wall and tighten all bolts.5. Place the wash basin on floor. Take the 2long hexagonal bolts with plain washer and rubber washer. Insert
the bolts in to side hole of wash basin and then hand tighten.6. Fix the fittings including water and drain connections.7. Then push the basin towards wall (from A) and tighten both side bolts with spanner. Insert plastic cap on
bolt head.
CAUTION- The wash basin is heavy and it is recommended that two persons, hold it while it is being fixed
insTa
llaTiO
n
MS CLAMP
BoLT
MounTing CLAMP
(40X5)
111
cO
nTa
cT
Factory and Head Quarters / Showroom (Sohar)
oman CeramiCS Co. S.a.o.GP.O.Box - 46, P.C - 327, Road No .9, Sohar Industrial Estate, Sultanate of Oman
Tel: + 968 26751317, 26751332, Fax: + 968 26751280e-mail : [email protected]
www.omanceramics.comwww.omanceramics.co.uk
UNITED ARAB EMIRATESAjman Branch, Office No : D6
P.O.Box - 21149 Ajman Free Zone, U.A.E
MUSCAT SHOWROOMMuscat Building
Wadi Kabir Round About, MuscatSultanate of Oman
Tel: 24811906 Fax: 24817928
BAHRAINFlat No 13, Bldg No 832,Road No 611, Block 306,
Manama, Kingdom of Bahrain
UK
Branches
113
E-mail : [email protected]