Water Treatment and Purification - Lenntech · - Shaft seal cpl. 1 pcs 72.a O-ring Diameter: 221,84...
Transcript of Water Treatment and Purification - Lenntech · - Shaft seal cpl. 1 pcs 72.a O-ring Diameter: 221,84...
GRUNDFOS DATA BOOKLET
TP 125-130/4-A-F-B-BAQE 400D 50HZ Grundfos pump 96109556
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/TP000/96109556/TP-125-130-4-A-F-B-BAQE.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 TP 125-130/4 A-F-B-BAQE
Product No.: On request
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsPumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Stub shaft4: Pump head/motor stool5: Wear rings
The pump housing is provided with a replaceable brass neck ring to reduce the amount of liquid runningfrom the outlet side of the impeller to the inlet side. The impeller is secured to the shaft with a nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: carbon graphite, metal-impregnated• Stationary seat material: silicon carbide (SiC)
This material pairing has a very good corrosion resistance and is especially suitable for water up to 120°C. However, seal life will be reduced at temperatures above 90 °C. The material pairing is notrecommended for liquids containing particles as this will result in heavy wear on the SiC face.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.
1/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionThe flanges have tappings for mounting of pressure gauges.
The motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.The pump shaft is fastened directly on the motor shaft with key and set screws.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with free-hole flange (FF).Motor-mounting designation in accordance with IEC 60034-7: IM B 5, IM V 1 (Code I) / IM 3001, IM3011 (Code II).
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 141 m³/hRated head: 10.4 mActual impeller diameter: 197 mmPrimary shaft seal: BAQECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Bronze(CuSn10)DIN W.-Nr. 2.1096.01ASTM B584-C83600
Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 125Pump inlet: DN 125Pump outlet: DN 125Pressure rating: PN 16(@): 620 mmFlange size for motor: FF265
Electrical data:Motor type: 132SBIE Efficiency class: IE3
2/11
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionRated power - P2: 5.5 kWPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 11,0-11,0/6,35-6,35 AStarting current: 700-760 %Cos phi - power factor: 0.86-0.80Rated speed: 1460 rpmEfficiency: IE3 89,6%Motor efficiency at full load: 89.6 %Motor efficiency at 3/4 load: 90.3 %Motor efficiency at 1/2 load: 90.4 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.46ErP status: EuP Standalone/Prod.Net weight: 193 kgGross weight: 226 kgShipping volume: 1.12 m³
3/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 125-130/4 A-F-B-BAQE 50 HzH
[m]
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Q [m³/h]0 20 40 60 80 100 120 140 160 180
eta[%]
0
20
40
60
80
100
TP 125-130/4, 3*400 V, 50Hz
P[kW]
0
1
2
3
4
5
6
7
NPSH[m]
0
1
2
3
4
5
6
7
P1
P2
4/11
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Q [m³/h]0 50 100 150
eta[%]
0
20
40
60
80
100
TP 125-130/4, 3*400 V, 50Hz
P[kW]
0
1
2
3
4
5
6
NPSH[m]
0
1
2
3
4
5
6P1
P2
125
250 202
159250 250
260300
620
877
021
528
323
0
310
Rp 1/4
M16
L3L2L1
+T +T+T
TO AMPLIFIERRELAY
IEC
TP2
11 T
HER
MAL
LY P
RO
TEC
TED
WH
EN T
HE
THER
MIS
TOR
S AR
EC
ON
NEC
TED
TO
AM
PLIF
IER
REL
AY F
OR
CO
NTR
OL
OF
MAI
N S
UPP
LYTH
ERM
ISTO
RS
PTC
AC
CO
RD
ING
TO
DIN
440
82
TO AMPLIFIERRELAY
+T +T+T
L1 L2 L3
Description ValueGeneral information:Product name: TP 125-130/4 A-F-B-BAQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 141 m³/hRated head: 10.4 mHead max: 130 dmActual impeller diameter: 197 mmPrimary shaft seal: BAQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Bronze(CuSn10)DIN W.-Nr. 2.1096.01ASTM B584-C83600
Material code: BInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 125Pump inlet: DN 125Pump outlet: DN 125Pressure rating: PN 16(@) 620 mmFlange size for motor: FF265Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: 0 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 132SBIE Efficiency class: IE3Rated power - P2: 5.5 kWPower (P2) required by pump: 5.5 kWMains frequency: 50 HzRated voltage: 3 x 380-415D/660-690Y VRated current: 11,0-11,0/6,35-6,35 AStarting current: 700-760 %Cos phi - power factor: 0.86-0.80Rated speed: 1460 rpmEfficiency: IE3 89,6%Motor efficiency at full load: 89.6 %Motor efficiency at 3/4 load: 90.3 %Motor efficiency at 1/2 load: 90.4 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: PTCMotor No: 87370261Others:Minimum efficiency index, MEI ≥: 0.46ErP status: EuP Standalone/Prod.Net weight: 193 kgGross weight: 226 kgShipping volume: 1.12 m³
125
250202
159
250250
260
300
620
310
Rp 1/4
M16
5/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 125-130/4 A-F-B-BAQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
I[A]
0
4
8
12
16
TP125-130/4 + 132SB 5.5 kW 3*400 V, 50 Hz
etacos phi
I
n[rpm]
1200
1300
1400
1500
1600
P1[kW]
0
2
4
6
8
n
P1
6/11
Printed from Grundfos Product Centre [2018.06.003]
On request TP 125-130/4 A-F-B-BAQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
125
250 202
159250 250
260300
620
877
021
528
323
0
310
Rp 1/4
M16
7/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
8/11
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
9/11
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
10/11
Printed from Grundfos Product Centre [2018.06.003]
Parts list TP 125-130/4, Product No. On requestValid from 1.1.2011 (1152)
Pos Description Annotation Données de classification Référence Quantité Unité- Nut 1 pcs
66 Washer Designation: DIN 125 A2 1Internal diameter: 19Outer diameter: 34Thickness: 3
66a Spring lock washer 167 Nut Thread: M18 1
- Cover 1 pcs77 Cover f/mech. seal 1
- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 277a Pan head screw 4
- Pump housing cpl. 1 pcs6 Pump housing 136 Nut Thread: M10 8
- Shaft seal cpl. 1 pcs72.a O-ring Diameter: 221,84 1
Material type: EPDMThickness: 3,53
105 Shaft seal Material type: BAQE 1- Stub shaft 1 pcs
9 Socket set screw Length (mm): 6 2Thread: M8
11 Parallel key 151 Pump shaft 119 Plug 2 pcs49 Impeller 1 pcs105b Spacer 1 pcs
+ 310 Motor 1 pcs
11/11
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289