WATER-SOURCE HEAT PUMP SYSTEMShvacdist.com/PDFs/Climate_Master_Com_Proj_LC007.pdf · water-source...

WATER-SOURCE HEAT PUMP SYSTEMS

7300 SW 44TH STREET

OKLAHOMA CITY , OK 73179

(800) -299-9747 • FAX (405) -745-6058

CLIMATEMASTER.COM REV. : 1 MARCH, 2010

2

3 CommerCialHVaC

The changing face of commercial heating and cooling requirements and solutions.

6 THeTwowaTer-SourCeSoluTionS

What is water-source and geothermal heating and cooling?

11 THeClimaTemaSTeradVanTage

What makes ClimateMaster the global leader in water-source heat pumps?

16 THeClimaTemaSTerfamilyofproduCTS(foldouT)

The largest and most diverse family of water-source products of any manufacturer, anywhere on the planet.

20 TranquiliTy27®Two-STage(TT)SerieS

Two to Six TonTwo-Stage EarthPure® (HFC-410A)Horizontal, Vertical, and Downflow Units.

Unit Features and Benefits, Dimensions, Physical Data, and AHRI/ISO 13256-1 Performance Data.

22 TranquiliTy20Single-STage(TS)SerieS

One-Half to Six TonSingle-Stage EarthPure® (HFC-410A)Horizontal, Vertical, and Downflow Units.


24 TranquiliTyHigHeffiCienCy(Tr)SerieS

One-Half to Five Ton EarthPure® (HFC-410A)Horizontal and Vertical Units.


26 TranquiliTy16CompaCT(TC)SerieS

One-Half to Five TonEarthPure® (HFC-410A) Compact UnitsHorizontal and Vertical Units.


28 TranquiliTyVerTiCalSTaCk(Trm)SerieS

Three-Quarter to Three TonEarthPure® (HFC-410A) Vertical Hi-Rise Stack Units.


30 TranquiliTyConSole(TrC)SerieS

Three-Quarter to One and One-Half TonEarthPure® (HFC-410A) Console Units.


32 TranquiliTyCompaCT(TCH)SerieS

Six to Ten TonEarthPure® (HFC-410A) Horizontal Units.


34 TranquiliTylarge(Tl)SerieS

Seven to Twenty-Five TonEarthPure® (HFC-410A) Vertical Units.


36 TranquiliTywaTer-To-waTer(Tmw)SerieS

Three to Twenty-Eight TonEarthPure® (HFC-410A) Water-to-Water Units.


38 roofTop(Tre)SerieS

Three to Twenty TonEarthPure® (HFC-410A) Rooftop Units.


40 rx(erV)module

Rooftop Energy Recovery Units.

Unit Features and Benefits, Dimensions, Physical Data, and AHRI-1060 Performance.

42 dediCaTedouTdoorair(To)SerieS

Three to One Hundred TonEarthPure® (HFC-410A) Horizontal andVertical Units.

Unit Features and Benefits, Dimensions.

TableofConTenTS

4

The ever-changing environment of commercial construction offers exciting breakthroughs in technology and materials, but it is not without some heartburn. Today, owners, architects, and contractors face many challenges in the design and construction of their projects. Challenges such as usable space, indoor air quality, energy efficiency, maintenance costs, building longevity, and the LEED® program all come to the forefront of the design process. When considering the solutions to these challenges, the type of HVAC system chosen directly affects each one.

uSableSpaCe

It has been said that the reason real estate grows in value is because no one is making any more. As cities continue to grow and spread out, the value of maximizing usable space becomes increasingly important. When selecting an HVAC system, you positively or negatively impact the usable space on a project. As an example, VAV (Variable Air Volume) systems utilize complicated ductwork systems along with extensive equipment rooms to deliver conditioned air into the building space. Additionally, VAV duct systems many times require more ceiling height which increases floor-to-floor space thus increasing building costs. By comparison, ClimateMaster Water-Source and Geothermal Heat Pump systems require little to no equipment room space and use a very simple, compact, and independent ductwork system.

indoorairqualiTy

As important as the actual temperature of a building space is, the quality of air within that space is equally important. The American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) has implemented Standard 62, which requires significantly higher amounts of fresh outdoor air for buildings. The challenge now becomes how to properly introduce, condition, and deliver this fresh air into the building space. Traditional options like two- and four-pipe Fan Coil systems must be up-sized significantly to handle the additional conditioning load. This means larger, more expensive units, larger, more expensive piping, and larger, more expensive boilers and chillers. In comparison, ClimateMaster systems offer a variety of options that can actually lower the overall system size, introduce 100% outdoor air, and lower system usage cost.

energyeffiCienCy

Today’s offices equipped with computers, copiers and other office tools can dramatically affect the heating and cooling load of a given space. When considering heating and cooling loads, rising energy costs demand an HVAC system that is efficient while building designs require a system that is also flexible. ClimateMaster has a solution for practically any application, and does so with some of the most energy efficient HVAC systems available on the market today. In fact, all of ClimateMaster’s products either meet or exceed the new federal mandated efficiency minimums.

mainTenanCeCoSTS

Complex systems such as two- and four-pipe fan coils and VAV systems require advanced maintenance and the trained personnel to

perform it. Large equipment rooms filled with chillers, air handlers, or large-scale boilers require personnel for monitoring and maintenance, which consume building space and leasing profits. The effect to the bottom line becomes significant when considering the potential of a complete system failure along with costly parts and equipment replacement. However, water-source and geothermal heat pumps require very little monitoring and maintenance - aside from routine filter changes. With factory installed DDC controls, the entire building can be accessed via any web-enabled computer for monitoring and set point control. No muss, no fuss, no worries.

buildinglongeViTy

New innovations offer longer life expectancies for today’s buildings. You should expect the same from the HVAC systems being placed inside these buildings. However, when it comes to longevity, not all systems are created equal. Complex chillers and air handling systems often have a large number of moving parts that will wear out over time. Water-source and geothermal heat pumps offer the advantage of very few moving parts. Fewer moving parts lower the occurrence of parts replacement and extend equipment life. This simplicity of design allows ClimateMaster systems to provide average life spans of 20 years or more. In fact, there are a number of ClimateMaster units that are still performing after 50 years - providing the continual comfort our customers have come to expect.

CommerCialHVaC

5

manyCHoiCeS,oneSoluTion

When choosing a HVAC system for a project, there are four basic types from which to choose.

fanCoilS

Fan coil systems are comprised of water-to-air coil air handlers connected via a two- or four-pipe insulated water loop. Fan coils require complex chillers and boilers to provide water loop fluid in a particular temperature range (i.e. chilled water for cooling and hot water for heating). Two-pipe fan coils have a major disadvantage as control is substantially limited to whatever mode the system is currently set at (i.e. cooling or heating). A four-pipe version can be installed that requires both chilled and heated water to be available at the same time. Four-pipe systems also require twice the piping and twice the circulation equipment of a two-pipe system, which makes a four-pipe system one of the most expensive systems to install.

VariableairVolume(VaV)

Variable Air Volume, or VAV, is one of the most common types of HVAC systems used in large commercial buildings today. A typical system is usually comprised of a large air handler, central ductwork system, and a relatively large equipment room. Conditioned air is distributed throughout the building via a central ductwork system and is regulated via dampers in each space. VAV systems typically have a higher first cost than water-source heat pumps, and may have similar operating costs, resulting in overall increased life cycle costs.

roofTop

Rooftop systems are similar to VAV systems in that they use a central ductwork system to distribute conditioned air into the building space. However, instead of one central unit, the system is comprised of multiple units which can be tasked for different conditioning requirements. Rooftop systems usually require additional structural reenforcement as well as cranes or other lifting equipment to place the units. Control in a particular zone is limited to what the system is currently set to (i.e. cooling or heating). Rooftop installation costs are low to moderate, but operating costs are typically 50% higher than water-source heat pumps. Additionally, the systems are exposed to the elements and are subject to damage and vandalism.

waTer-SourCeandgeoTHermalHeaTpumpS

Water-source and geothermal heat pump systems are comprised of individual packaged units that transfer heat via a single- or two-pipe water loop. Each unit can be used in either heating or cooling mode year-round and loop temperature is maintained via a boiler/tower combination or earth-coupled loop. Each zone has complete control of its heating/cooling mode and each unit is independent from the others. This means if one unit goes down, the whole system is not affected. Controls can be as simple as one unit, one thermostat. Water-source and geothermal heat pump systems are the most energy, cost, and space efficient of any system in the industry.

SySTemCompariSon

System

Ease of Design

Ease of Installation

Installation Space

Installation Cost

Maintenance Requirem

ents

Maintenance C

osts

Future System Expansion

Sound Levels

Operating C

osts

Total Zone Failure Chance

Individual Tenant Control

Options

Additional A

uxiliary Equipm

ent Needed

Structure M

odification Needs

System Longevity

Two-Pipe Fan Coils Low Low High Med High High Low Low Med High Low Low High High Med

Four-Pipe Fan Coils Low Low High High High High Low Low High High Low Low High High Med

PTAC / PTHP Low Low Low Low High High Med High High Low Med Low Med High Low

VAV Low Low High Med High High Low Med Med High Low Low High High Med

Rooftop Low Low High Low Med High Low Med Med High Low Low Med High Med

Water-Source Heat Pumps High High Low Low Low Low High Low Low Low High High Low Low High

Geothermal Heat Pumps High High Low Low Low Low High Low Low Low High High Low Low High

7

waTer-SourCeHeaTpumpS

Water-Loop heat pump systems combine water-source heat pumps on a common piping loop with a heat rejector and boiler, which are used to maintain the circulating water temperature within a controlled range, typically from 60°F to 95°F [15°C to 35°C]. The most common heat rejectors are open cooling towers with isolating heat exchangers, closed-circuit evaporative coolers, or dry coolers. Boilers are usually gas, oil, or electric.

Each zone heat pump utilizes the water loop to provide heating or cooling at any time, during or after hours, regardless of the operating mode of the other heat pumps. This is accomplished without duplicate heat and cool distribution systems, without the double waste inherent in reheat modes, and without concurrent operation of the cooling source and boiler, unlike most HVAC systems that provide the same capabilities.

Water-loop heat pump systems also operate very efficiently at part-load conditions, such as when a small portion of the building remains occupied after hours. Only the required zone heat pumps are used, unlike systems that must keep a large central plant in operation at an inefficient scaled-back capacity in order to serve a small portion of the load.

A typical building has a perimeter with outside exposure that is directly affected by variable outdoor weather conditions and a core without outside exposure that is almost unaffected by the weather. In order to understand the energy sharing benefits of a water-source heat pump system, the interaction of the loads in the core and perimeter zones must be analyzed for occupied

periods (internal gains present) and unoccupied periods (temperature setback/setup and little or no internal gains) throughout the year. For illustration, the following are the main energy consuming operating modes of an office building in a temperate climate.

SummeroCCupied

All zones require cooling and are rejecting heat into the water loop. The heat rejector maintains the maximum water loop temperature according to a predetermined setpoint (fixed or outdoor reset). The boiler is off.

winTerwarm-up

During recovery from night setback, most zones will require heating and will be extracting heat from the water loop. The boiler maintains the minimum water loop temperature according to a predetermined setpoint. The heat rejector is off. The warm-up period is typically one hour or less per day.

winTeroCCupied

Most core zones will require cooling because of the internal heat gains discussed previously. Most perimeter zones will require heating. Because heat is being simultaneously rejected into and extracted from the water loop, both the boiler and the heat rejector remain off much of the time. The inherent sharing of energy within the water loop minimizes boiler and heat rejector operation and provides maximum system efficiency.

SoluTion1

8

TCH120TCH120

TLV168

TCH012 TCH012 TCH012 TCH012 TCH012

TCH048 TCH048 TCH048

TCH024TCH024 TCH024 TCH024

TCH012

Office Office Office Office Office Office

OfficeConference Room Restroom Breakroom Computer Room

CubiclesCubicles

Lobby

Production Floor

Mec

hani

cal R

oo

m

CoolingTower

Boiler

TCH120TCH120

TLV168




TCH012



CubiclesCubicles

Lobby

Production Floor

Mec

hani

cal R

oo

m

CoolingTower

Boiler

warmweaTHer(HigHCoolingdemand)

CoolweaTHer(HigHHeaTingdemand)

awaTer-SourCeexample

As an example of how water-source heat pumps can handle a variety of different applications, the building shown to the right is a fictional bronze statue foundry company in the midwest portion of the United States. The first floor comprises their production floor and office space. The second floor of the building is reserved for future use. The cooling tower and boiler work as needed to maintain an average loop temperature between 60 to 95°F [15 to 35°C]. Water-source heat pumps can efficiently operate in either heating or cooling mode under these conditions. This gives individual and specialized zone control for maximum comfort and the ability to change operation modes as needed.

A mixture of units in heating mode and units in cooling mode create a constant temperature in the water loop. In Balanced Mode, there is no need for heat injection or rejection via the boiler or cooling tower. The heat is simply moved from one zone to another.

SoluTion1example

9

geoTHermalSySTemS

These “Boilerless/Towerless” heat pump systems use the natural thermal properties of the Earth to dissipate or capture heat for the water loop. Geothermal heat pumps operate in an identical fashion to water-source heat pump units. However, without the need for a boiler or cooling tower, they save substantial energy costs and space. The water loop system is underground and the units are inside the building. Thus, the environmentally friendly geothermal system preserves the architectural design of a building naturally.

geoTHermalearTHloopS

Geothermal Earth Loops come in several different configurations depending on space availability and soil properties. Chances are at some point you have either stood over, or walked across a geothermal loop field. Loop fields can be located under parking lots, landscaped areas, or any number of other locations. All earth loops use high-density polyethylene pipe to circulate either water or an antifreeze mixture. All joints and connection fittings are thermally fused to prevent leaks and most piping comes with a 25 year or longer warranty.

VerTiCalloopS

Vertical loops utilize bore holes drilled to an average depth of 250 feet. Once the loop pipe is inserted into the bore, it is grouted using a Bentonite mixture for maximum thermal conductivity. When space is limited, vertical loops are the most common type of geothermal loop installed.

HorizonTalloopS

Horizontal loops utilize trenches dug to an average depth of four to six feet. As one of the more cost effective loops to install, horizontal loops are commonly found in open fields, parks or under parking lots.

lakeloopS

Lake loops utilize a “slinky” assembly of geothermal loop piping placed at the bottom of a pond, lake, or other large body of water. An extremely cost effective loop system, lake loops are an easy alternative if the option is available.

wellSySTemS

Most commonly known as “Open Loop”, well systems pump water out of a nearby body of water or water well, and then discharge the water into another body of water or water well. Well systems usually employ a plate heat exchanger inside the building to keep the building water loop separated from the well water. This prevents any contaminates from affecting unit performance and extends system life. Well systems are often the most efficient as the well water is always at the same temperature year-round.

SoluTion2

10

warmweaTHer(HigHCoolingdemand)

ageoTHermalexample

Using the same building model, the cooling tower and boiler are replaced with a geothermal vertical loop field. Identical in overall zone operation, the building benefits by having less overall equipment and reduced operation costs. Building aesthetics are also improved by eliminating outdoor equipment, and additional space is gained by eliminating the boiler and additional support equipment.

TCH120TCH120

TLV168




TCH012



CubiclesCubicles

Lobby

Production Floor

Sto

rag

e

The cooling tower and boiler can be eliminated in the geothermal application freeing up space used for equipment for other use. Only a small amount of room is needed for loop circulation equipment.

SoluTion2example

12

wHoiSClimaTemaSTer?

Who is ClimateMaster? ClimateMaster emerged from the marriage of several water-source heat pump companies in a blending of strengths to form a focused organization. For over 50 years, we have been focused on enhancing business and home environments around the world. Our mission as the world’s largest and most progressive leader in the water-source and geothermal heat pump industry reveals our commitment to excellence - not only in the design and manufacture of our products, but in our people and services.

madeinTHeuSa

All of ClimateMaster’s 610,000 square feet in facilities operate in Oklahoma City, Oklahoma, which means ClimateMaster units and components are manufactured in the United States using American labor. While the trend nationally is to outsource labor outside the United States, ClimateMaster has made the commitment to remain proudly American made.

ClimaTemaSTerdeSign

From concept to product, ClimateMaster’s Integrated Product Development Team brings a fusion of knowledge and creativity that is unmatched in the industry today. Drawing from every aspect of our business: Engineering, Sales, Marketing, and Manufacturing, our Development Team has created some of the most advanced, efficient, and versatile products available.

innoVaTion,ConCepT,needS

Great products are born from necessity. Whether it is a need to reduce sound, fit in a smaller space, make easier to service, achieve better efficiencies, or due to changing technologies, or new

government regulations, ClimateMaster leads the industry in advancing the form, fit and function of water-source and geothermal heat pumps. Our Design Team continually strives for even the slightest improvement to our products. It is this continual drive for excellence that sets ClimateMaster apart from all other manufacturers.

STarTTofiniSH

At ClimateMaster, every product development project begins with a comprehensive set of specifications. These specifications are a culmination of input from the market, a specific need, or a number of other factors. From these detailed specifications, prototypes are constructed and testing begins. After a rigorous testing period in ClimateMaster’s own state-of-the-art lab facility, the data is compared to the project specifications. Once the Design Team is satisfied that all of the specs are met, the unit is sent to the Production Department for pilot runs. After the pilot runs are completed, unit literature is finalized and the product is released to the marketplace.

ClimaTemaSTerproduCTion

Innovative products demand innovative manufacturing processes. ClimateMaster’s integrated production process combines every aspect of the manufacturing of our equipment into an organized, balanced, and controlled whole.

fabriCaTion

Every sheet-metal component of a ClimateMaster unit is produced in our Fabrication Department. Panels are precisely constructed of galvanized or stainless steel using computerized cutting, punching, and forming equipment. This precise fabrication means a tighter fit that makes for a more solid unit and reduced vibration, which equals reduced noise. On certain series, an polyester powder coating is then applied to increase corrosion resistance and enhance the look of the unit. The final step is the addition of fiberglass insulation to the inside as an additional layer of sound deadening. This insulation meets stringent NFPA regulations, and includes antibacterial material.

aSSembly

ClimateMaster’s 610,000 square foot facilities use the most stringent quality control standards in the industry. Each unit is assembled under the close supervision of our Integrated Process Control System or Procix. This multi-million dollar computer system watches each unit as it comes down the assembly line. In addition, our Quality Department is stationed on each line and performs random audits not only on the units, but also on component parts. All component parts must pass each and every quality checkpoint before a unit is packaged and shipped. These systems and processes are maximized due to the comprehensive and ongoing training every employee receives from the date they are hired.

THeClimaTemaSTeradVanTage

13

ComponenTparTS

To produce a quality unit, you have to start with quality components. ClimateMaster’s Purchasing Department is relentless in its search for the best components for our products - while securing these components at prices that keep costs low. Any new component must go through a grueling testing phase before it ever sees the production line. Working closely with vendors and their engineers, we continually find new ways to not only improve our units, but to ensure component quality as well. Sister companies like KOAX, who produce our coaxial heat exchangers, allow ClimateMaster to provide components specifically designed for our applications.

iSo9001:2000CerTifiCaTion

International Organization for Standardization (ISO) is a network of the national standards institutes of over 150 countries, on the basis of one member per country, with a Central Secretariat of Geneva, Switzerland, that coordinates the system. ISO is a non-governmental organization that occupies a special position between the public and private sectors whose goal is to create, maintain, and improve standards worldwide. ISO standards contribute to making the development, manufacturing, and supply of products and services more efficient, safer, and cleaner. ISO certification demonstrates ClimateMaster’s commitment to quality and continuous improvement.

ClimaTemaSTerawardS

ClimateMaster leads the industry in product awards and certifications. From 100% Air-Conditioning, Heating and Refrigeration Institute (AHRI) performance ratings to industry awards for innovation, ClimateMaster applies cutting-edge technology to every product we design and manufacture. ClimateMaster’s Tranquility 27® Series has won multiple awards and is widely accepted as a leader in the industry. You know you are doing great things when a lot of people tell you so.

engineeringlabfaCiliTieS

ClimateMaster has one of the largest testing facilities of any water-source heat pump manufacturer including the reverberant, ISO 3741 Certified sound testing room in the industry. Innovation and product improvements are a mainstay of the ClimateMaster Engineering Lab. Our people are what make the difference in the development of superior products in a timely manner. Our certified facility has seven automated test cells capable of testing a wide variety of unit types under varying conditions. These cells are capable of producing data twenty-four hours a day, seven days a week. The development time of equipment is significantly reduced allowing ClimateMaster Engineers and Lab Technicians to spend more time on the actual development process. This team effort has allowed us to maintain a high degree of competence in our industry. Our test cells and test equipment are calibrated and certified periodically, per recognized industry standards, to insure the data is accurate and repeatable. In addition to testing new concept

units, the lab continually audits production units throughout the year to insure quality performance and reliability.

induSTryaffiliaTionSandaSSoCiaTionS

ClimateMaster works closely with the International Standards Organization (ISO), the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE), and the Electrical Testing Laboratories (ETL), to insure that our equipment not only meets the highest performance standards, but meets the highest industry standards as well. ClimateMaster has celebrated many consecutive years of 100% success rate in AHRI’s performance certification program. An uncommon feat in the industry, this is a testament to the craftsmanship, design, and construction of every ClimateMaster unit. CuSTomerSerViCe

ClimateMaster has gone to great lengths to meet our customers’ business-to-business needs. ClimateMaster provides great products and our customer support is second to none. Our highly trained and experienced Customer Service Department is available to assist you. Visit our online Business Center or contact Tech Services for any information you may need.

R

MA

NU

FAC

TUR

ER

CERTIFIED TO ARI AS COMPLY

ING

WIT

H

ISOSTANDARD 13256-1

HEAT PUMPS

WAT

ERTO

AIR BRINETOAIR

ISO 9001:2000Certified

Quality: First & Always

14

ClimaTemaSTer.Com

Our web site has become the central hub for all of our customers’ information needs. Current literature, specifications, presentations, and other resources are readily available in an intuitive, easy-to-navigate format. At the click of a mouse, our new online Business Center allows you to check the status of your orders, lookup sales history, manage contact information, and even order literature, accessories, and equipment. Combined with our unique EZ-ORDER software, we take all the effort and guesswork out of unit orders.

engineeringdeSignSpeCifiCaTionS

Advanced units need advanced specifications. ClimateMaster’s new Engineering Design specifications provide the most detailed information for your next project.

liTeraTure

At ClimateMaster, innovation never sleeps. As new advances are made, and new products are released, the need for accurate literature becomes critical. Every piece of technical literature that ClimateMaster produces is printed in our state-of-the-art on-demand printing facility. What this means is that we print only the literature we need at the time we need it. This insures that only the most current and accurate data is in the field.

SHipping

When you need that critical service part or piece of literature for your next presentation, you may rest assured that ClimateMaster has a shipping option for you. Networked with a variety of carriers, we provide fast and reliable shipping to anywhere in the world.

THefuTureofClimaTemaSTer

Our long history of innovation has paved the way for future endeavors with a solid platform of success. Growing markets in Europe and Asia demand a different way of not only manufacturing our products, but also successfully marketing them. Government regulations have phased out R-22 refrigerant at the beginning of 2010 paving the way for new HFC-410A, a much more environmentally friendly refrigerant. In looking ahead, we continually strive for better processes, better designs, and better innovations that will keep ClimateMaster as the global leader in water-source and geothermal heat pumps.

adVanTageexCluSiVeS

Being a leader in innovation, ClimateMaster brings industry firsts, as well as industry exclusives, to our family of products.

ConTrolS

ClimateMaster offers two levels of solid-state digital controls; the CXM and DXM control board.

CXMOur standard CXM control board comes programmed with ClimateMaster’s Unit Performance Sentinel (UPS) which monitors unit performance and notifies the owner of potential unit problems before a lockout occurs. Additionally, the CXM’s eight standard safeties protect the unit from damage.

• Anti-Short Cycle• Low Voltage• High Voltage• High Refrigerant Pressure

• Low Refrigerant Pressure (Loss of Charge)

• Air Coil Low Temperature

• Water Coil Low Temperature

• Condensate Overflow

DXMOur enhanced controls option, the DXM control board offers all of the advantages of the CXM board but adds the following additional features:

• Multi-Stage Operation• Night Setback with

Override• Emergency Shutdown• Reheat Control• Boilerless Electric Heat

DDC ControlsFactory mounted LONWorks or Multi-ProtoCol (MPC) DDC controllers are an available option on all ClimateMaster products. These controllers give owners the ability to implement a variety of building automation systems such as BACnet, ModBus, and Johnson N2. Through a web enabled PC, individual units, unit zones, and entire building systems can be monitored and controlled with the click of a mouse. The systems provide unit status, set-point control, performance curves, and fault indications.

15

ConfiguraTionS

No other manufacturer provides as many size, performance, configuration, and cost options as the ClimateMaster family of products offers. From our smallest horizontal unit in the TCH-006, to our largest vertical in the TLV-300, to our Rooftop Series with available 100% make-up air (when mated with the Rx ERV), to the vertical stack, console, water-to-water, and two-stage Tranquility 27®, we have a unit to fit your application.

Sound

Prior to the adoption of the 260-2000 sound standard there had been no standard for the evaluation of water-source heat pump sound performance. Also, those manufacturers who did generate and publish their own sound data, did so in their own labs making it difficult to have the data independently certified and accurate comparisons were therefore, impossible. Now that a standard has been established, it is critical to compare the data correctly. If data from two manufacturers is compared using different test procedures, results are not comparable. ClimateMaster has tested its product line for both ducted discharge and free inlet air combined with case radiated tests. Comfort has never been so quiet with our intelligent sound design. Our products use a variety of technologies to maintain our lead as the quietest units in the industry.

dualleVelVibraTioniSolaTion

ClimateMaster units use an exclusive double isolation compressor mounting system. This dual level isolation deadens vibration and provides quiet operation.

TorSion-flexblowerS

Blower motors, on select models, are mounted with a unique torsion-flex mounting system which not only allows for easy service, but also reduces vibration from the blower motor during operation.

ulTraquieT

ClimateMaster’s optional additional sound suppression package enhances our already excellent sound performance through the use of dual density acoustical insulation and other strategically placed sound attenuating materials. No other manufacturer’s mute package comes close to matching the performance of the UltraQuiet package.

e-CoaTedairCoilSandwaTerCoilS

All ClimateMaster water-source heating and cooling systems are available with an E-Coated air-coil option. E-Coated or Powder Coated water coils are standard on all products. This process provides years of protection against coil corrosion from airborne chemicals resulting from modern building material outgassing and most airborne environmental chemicals. In fact, ClimateMaster’s exclusive E-Coated air-coils enhance corrosion protection to nearly 20 times that of a traditional uncoated coil.*

*Test based upon ASTM B117 Salt Spray test hours.

Climadry™reHeaT

Continuing to lead the industry in IAQ (Indoor Air Quality) solutions, select ClimateMaster units are available with an innovative method (patented) of reheating the air. The ClimaDry™ microprocessor-controlled option will automatically provide 100% reheat by adjusting the amount of reheat capacity based upon supply air temperature. This new approach to reheat provides dehumidified, neutral temperature supply air, while eliminating the problem of overcooling the space when loop temperatures drop. All components are internal to the unit, saving space and keeping installation costs low. A simple humidistat or dehumidistat control activates the option.

VolTageS

ClimateMaster units are available in a wide variety of commercial voltages, providing maximum flexibility in building design. Available voltages are as follows:

• 208-230/60/1• 208-230/60/3• 265/60/1• 460/60/3• 575/60/3 * Not all units are available with every voltage combination shown above.

aCCeSSorieS

ClimateMaster offers a complete line of accessories to complete any project, including hoses, thermostats, valves, pumps, fittings, controllers, sensors, filters and more.

T H E C L I M A T E M A S T E R F A M I LY O F P R O D U C T S

Product Series

Standard Features Factory Installed Options

EarthP

ure® (H

FC-410A

) Refrig

erant

Micro

pro

cessor C

XM

Co

ntrols*

Standard

Rang

e

Co

pp

er Water C

oil**

TXV

Dual Level C

om

presso

r V

ibratio

n Isolatio

n

Field C

onvertib

le Discharg

e (H

orizo

ntal Units)

Multip

le Access P

anels for Installatio

n and

Service Ease

Scroll C

om

presso

rs

Factory Installed

Hang

er Brackets

(Ho

rizontal U

nits)

Rem

ote R

eset at Thermo

stat

Co

ndensate O

verflow

Pro

tection

Cup

ro-N

ickel Co

il

Hig

h Static Blo

wer

UltraQ

uiet (Mute) P

ackage

Extend

ed R

ange (20 to

120ºF) ‡

Auto

-Flow

Water R

egulatio

n

Two

-Way C

ontro

l Valve

Do

wnFlo

w C

onfig

uration

Desup

erheater Co

il

DD

C C

ontro

ller

Deluxe D

XM

Co

ntroller

E-C

oated

Air C

oil

Internal Second

ary Pum

p

EC

M Fan***

Clim

aDry R

eheat

Internal Service Disco

nnectTranquility 27® Two-Stage (TT) • • • • • • • • • • • • • • • • • • • • • • • • • •

Tranquility 20 Single-Stage (TS) • • • • • • • • • • • • • • • • • • • • • • • • • • •

Tranquility High Efficiency (TR) • • • • • • • • a • • • • • • • • • • • • • • •

Tranquility 16 Compact (TC) • • • • • • • • a • • • • • • • • • •

Tranquility Vertical Stack (TRM) • • • • • • a • • • • • • • • • • • •

Tranquility Console (TRC) • • • • • • • • • • • • • • • • •

Tranquility Compact (TCH) • • • • • • • • • • • • • • • • • • •

Tranquility Large (TL) • • • • • • • • • • • • • • • • • • • c

Tranquility Water-to-Water (TMW) • • • • • • • • • • • • b • •

Rooftop (TRE) • • • • • • • • • • • • • • • • • • •

Rx Energy Recovery Ventilator (ERV) • •

Vertical Dedicated Outdoor Air (TO) • • • • • • • † • •

Horizontal Dedicated Outdoor Air (TO) • • • • • • • † • • •

* Standard control for TO Series is DDC with modulating HGR. ** Standard water coil construction for TO Series is stainless steel. *** Standard on TT Series ‡ Standard on TMW Series † Extended Range = 35°F–95°F EWT a Sizes 024 and above b Sizes 036 - 120 c Vertical series only

U N I T F E AT U R E S

ROOFTOP (TRE) SERIESThree to Twenty Ton

Rooftop Units

TRANQUILITY VERTICAL STACK (TRM) SERIES

Three-Quarter to Three Ton EarthPure

® (HFC-410A) Vertical

Hi-Rise Stack Units

TRANQUILITY (TOH) SERIESThree to One Hundred Ton

Horizontal Dedicated Outdoor Air Systems

TRANQUILITY (TOV) SERIESFour to Thirty Ton

Vertical Dedicated Outdoor Air Systems

TRANQUILITY MODULAR WATER-TO-WATER (TMW) SERIES

Three to Twenty-Eight Ton EarthPure

® (HFC-410A)

Water-to-Water Units

TRANQUILITY CONSOLE (TRC) SERIES

Three-Quarter to One-and-One Half Ton EarthPure

® (HFC-410A)

Console Units

TRANQUILITY LARGE (TL) SERIES

Seven to Twenty-Five Ton EarthPure

® (HFC-410A)

Vertical Units

TRANQUILITY 20 SINGLE-STAGE (TS) SERIES

One-Half to Six Ton Single-Stage EarthPure

® (HFC-410A)

Horizontal, Vertical, and Downflow Units

TRANQUILITY 27® TWO-STAGE (TT) SERIES

Two to Six Ton Two-Stage EarthPure

® (HFC-410A)

Horizontal, Vertical, and Downflow Units

TRANQUILITY 16 COMPACT (TC) SERIES

One-Half to Five Ton Compact EarthPure

® (HFC-410A)

Horizontal and Vertical Units

TRANQUILITY COMPACT (TCH) SERIES

Six to Ten Ton Compact EarthPure

® (HFC-410A)

Horizontal Units

TRANQUILITYHIGH EFFICIENCY (TR) SERIES

One-Half to Five Ton EarthPure

® (HFC-410A)

Horizontal and Vertical Units

Rx (ERV) MODULERooftop Energy Recovery Units

T H E C L I M A T E M A S T E R F A M I LY O F P R O D U C T S

20

The Tranquility 27® Two-Stage (TT) Series blends the most advanced technology with the most advanced design to create some of the highest efficiency water-source heat pumps available today.

The Tranquility 27® Two-Stage Series utilizes EarthPure® (HFC-410A) refrigerant along with the Copeland UltraTech™ two-stage compressor and ECM variable speed motor to bring unmatched performance and comfort.

uniTfeaTureS

• Sizes 026 (2 ton, 7.0 kW) through 072 (6 ton, 21.1 kW)

• Environmentally-friendly EarthPure® HFC-410A refrigerant

• Unsurpassed efficiencies (far exceeds ASHRAE 90.1)• Copeland UltraTech two-stage compressor and

variable speed ECM fan motor

• Galvanized steel construction and powder coat paint on all units

• Unique double isolation compressor mounting for quiet operation

• Discharge muffler standard on all sizes for superior sound attenuation

• Microprocessor controls standard (optional DXM and/or DDC controls)

• Field convertible discharge air arrangement for horizontal units

• Bi-directional, balanced port expansion valve refrigerant metering device standard

• Standard range or extended range operation• Water connections securely mounted flush to the

cabinet corner post (no backup wrench required)• Eight safeties standard

THeTranquiliTy27®Two-STage(TT)SerieS

Easy to remove blower housing for quick service and ECM variable speed motor

Foil faced insulation in the blower section and fiberglass insulation in the compressor section

Copeland UltraTech™ two-stage compressorwith dual compressor vibration isolation

Easy service access from multiple sides

Easy access control box contains advanced digital controls with Remote Service Sentinel (Optional Enhanced controls (DXM) & DDC Controllers)

Factory installed hanger brackets on horizontal units

Standard stainless steel insulated drain pan with condensate overflow protection

21

Model Refrigerant

Water Loop Heat Pump Ground Water Heat Pump Ground Loop Heat Pump

Cooling 86°F [30°C] Heating 68°F [20°C] Cooling 59°F [15°C] Heating 50°F [10°C] Cooling 77°F [25°C] Heating 32°F [0°C]

Capacity EER Capacity

COP


COP


COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

TT-026 HFC-410A 25,300 [7.42] 15.9 [4.7] 30,800 [9.03] 5.3 28,900 [8.47] 24.5 [7.2] 25,700 [7.53] 4.8 26,600 [7.80] 18.5 [5.4] 19,800 [5.80] 4.0

TT-038 HFC-410A 36,200 [10.61] 15.6 [4.6] 44,800 [13.13] 5.3 41,200 [12.08] 23.0 [6.7] 36,700 [10.76] 4.7 38,200 [11.20] 18.2 [5.3] 29,000 [8.50] 4.0

TT-049 HFC-410A 48,400 [14.19] 15.7 [4.6] 59,900 [4.19] 5.2 54,600 [16.00] 22.5 [6.6] 48,300 [14.16] 4.7 50,600 [14.83] 17.9 [5.2] 37,500 [10.99] 4.0

TT-064 HFC-410A 61,500 [18.03] 15.0 [4.4] 72,300 [21.19] 5.0 68,600 [20.11] 22.0 [6.4] 59,600 [17.47] 4.4 64,800 [18.99] 17.5 [5.1] 48,000 [14.07] 3.9

TT-072 HFC-410A 68,700 [20.14] 14.2 [4.2] 88,600 [25.97] 4.9 77,100 [22.60] 19.9 [5.8] 70,200 [20.57] 4.3 71,600 [20.99] 16.2 [4.7] 54,100 [15.86] 3.6

performanCeandSpeCifiCaTionS

Full Load AHRI/ISO/ASHRAE 13256-1 Data (English (IP) Units & Metric (SI) Units)

Cooling capacities based upon 80.6°F [27°C] DB, 66.2°F [19°C] WB entering air temperature.Heating capacities based upon 68°F [20°C] DB, 59°F [15°C] WB entering air temperature.All ratings based upon operation at the lower voltage of dual voltage rated models.

Dimensional DataVertical Upflow Model

Overall Cabinet

W D H

026in.cm

22.4 56.8

25.665.1

48.5123.2

038in.cm

25.4 64.5

30.677.8

50.5128.3

049in.cm

25.4 64.5

30.677.8

54.5138.4

064in.cm

25.4 64.5

30.677.8

58.5148.6

072in.cm

25.4 64.5

30.677.8

58.5148.6

Horizontal Model

Overall Cabinet

W D H

026in.cm

22.456.8

62.2158.0

19.348.9

038in.cm

25.464.5

71.2180.8

21.354.0

049in.cm

25.464.5

76.2193.5

21.354.0

064in.cm

25.464.5

81.2206.2

21.354.0

072in.cm

25.464.5

81.2206.2

21.354.0

Model Refrigerant




COP


COP


COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

TT-026 HFC-410A 19,400 [5.69] 18.3 [5.4] 22,400 [6.57] 6.1 22,200 [6.51] 30.8 [9.0] 18,600 [5.45] 5.1 21,300 [6.24] 26.0 [7.6] 16,500 [4.83] 4.6

TT-038 HFC-410A 26,200 [7.68] 18.5 [5.4] 30,800 [9.03] 6.3 30,200 [8.85] 31.5 [9.2] 24,800 [7.27] 5.1 28,900 [8.47] 27.0 [7.9] 22,100 [6.48] 4.5

TT-049 HFC-410A 36,100 [10.58] 18.0 [5.3] 44,300 [12.98] 6.2 40,700 [11.93] 28.7 [8.4] 35,400 [10.38] 5.1 39,600 [11.61] 24.9 [7.3] 31,200 [9.14] 4.6

TT-064 HFC-410A 44,900 [13.16] 17.6 [5.2] 51,100 [14.98] 5.7 51,900 [15.21] 29.7 [8.7] 49,800 [12.25] 4.7 49,800 [14.60] 25.3 [7.4] 37,500 [10.99] 4.3

TT-072 HFC-410A 52,800 [15.48] 16.0 [4.7] 65,200 [19.11] 5.1 59,800 [17.53] 24.5 [7.2] 51,700 [15.15] 4.3 57,700 [16.91] 21.4 [6.3] 45,400 [13.31] 3.9

Part Load AHRI/ISO/ASHRAE 13256-1 Data (English (IP) Units & Metric (SI) Units)

Note: Add 4” [10.16cm] to height forvertical downflow models.

Voltage OptionsModel Volts Hz Phase

026 208/230 60 1

038 - 064208/230 208/230

460

60 60 60

1 3 3

072 208/230 60 1

22

The Tranquility 20 Single-Stage (TS) Series builds on ClimateMaster’s commitment to utilizing the most advanced technology and design to create one of the most efficient single-stage water-source heat pump available today. The Tranquility 20 Single-Stage Series combines EarthPure® (HFC-410A) refrigerant with the Copeland Scroll compressor (rotary in 018 and smaller) and either an ECM variable speed or PSC multi-speed fan motor to create unmatched performance and flexibility.

uniTfeaTureS

• Sizes 006 (1/2 ton, 1.8 kW) through 070 (6 ton, 21.1 kW)

• Environmentally-friendly EarthPure® (HFC-410A) refrigerant

• Unsurpassed efficiencies (far exceeds ASHRAE 90.1)• Copeland Scroll compressor (size 018 and above)• Multi-speed PSC fan motor (optional variable

speed ECM motor on size 018 and above)


• Unique double isolation compressor mounting for quiet operation

• Discharge muffler standard (except rotary compressors) for superior sound attenuation


• Field convertible discharge air arrangement for horizontal units


• Standard range or extended range operation• Water connections securely mounted flush to the

cabinet corner post (no backup wrench required)• Eight safeties standard

THeTranquiliTy20Single-STage(TS)SerieS

Easy to remove blower housing for quick service and optional ECM variable speed motor

Foil faced insulation in the blower section and fiberglass insulation in the compressor section

Dual compressor vibration isolation for quiet operation


Easy access control box contains advanced digital controls with Remote Service Sentinel (Optional Enhanced controls (DXM) & DDC Controllers)


Standard stainless steel insulated drain pan with condensate overflow protection

23


AHRI/ISO/ASHRAE 13256-1 Data (English (IP) Units & Metric (SI) Units)

Dimensional Data

Model* Refrigerant




COP


COP


COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W[W/W]

Btuh [kW]

TS-006 PSC HFC-410A 6,300 [1.85] 15.7 [4.6] 8,000 [2.34] 5.4 7,400 [2.17] 25.5 [7.5] 6,300 [1.85] 4.4 6,700 [1.96] 18.5 [5.4] 4,800 [1.41] 3.4

TS-009 PSC HFC-410A 9,300 [2.74] 15.3 [4.5] 11,100 [3.26] 4.8 11,100 [3.26] 25.2 [7.4] 9,400 [2.76] 4.3 10,000 [2.94] 18.1 [5.3] 7100 [2.09] 3.4

TS-012 PSC HFC-410A 11,700 [3.43] 15.4 [4.5] 13,800 [4.05] 4.5 13,300 [3.90] 24.6 [7.2] 11,800 [3.46] 4.0 12,300 [3.60] 18.1 [5.3] 9,500 [2.78] 3.5

TS-018 PSC TS-018 ECM HFC-410A

18,600 [5.47]19,200 [5.65]

15.0 [4.4]16.5 [4.8]

23,000 [6.76]23,300 [6.85]

5.25.9

21,300 [6.26]22,100 [6.50]

24.8 [7.3]26.3 [7.7]

18,800 [5.53]18,900 [5.56]

4.54.9

19,500 [5.74]20,200 [5.94]

18.4 [5.4]19.4 [5.5]

14,500 [4.27]14,500 [4.43]

3.63.9


25,100 [7.36] 25,000 [7.33]

16.2 [4.8] 17.0 [5.0

29,600 [8.68] 30,000 [8.79]

4.9 5.3

28,600 [8.38] 28,100 [8.24]

25.7 [7.5] 27.4 [8.0]

25,000 [7.33] 25,100 [7.36]

4.3 4.6

26,300 [7.71] 26,000 [7.62]

19.1 [5.6] 20.0 [5.0]

19,000 [5.57] 19,400 [5.69]

3.7 3.8


28,200 [8.26] 28,600 [8.38]

15.3 [4.5] 15.6 [4.6]

34,900 [10.23] 35,200 [10.32]

5.0 5.3

31,700 [9.29] 32,200 [9.44]

22.9 [6.7] 23.9 [7.0]

29,400 [8.62] 29,400 [8.62]

4.4 4.6

29,400 [8.62] 29,800 [8.73]

17.6 [5.2] 18.0 [5.3]

23,600 [6.92] 23,700 [6.95]

3.8 3.9


33,000 [9.67] 33,100 [9.70]

16.6 [4.9] 17.6 [5.2]

39,800 [11.66] 39,500 [11.58]

5.5 5.8

37,300 [10.93] 37,300 [10.93]

25.1 [7.4] 26.5 [7.8]

32,900 [9.64] 32,900 [9.64]

4.8 5.1

34,500 [10.11] 34,600 [10.14]

19.2 [5.6] 20.2 [5.9]

25,700 [7.53] 25,800 [7.56]

3.9 4.2


37,400 [10.96] 37,800 [11.08]

16.0 [4.7] 17.1 [5.0]

49,400 [14.48] 48,600 [14.24]

5.4 5.7

42,900 [12.57] 44,200 [12.95]

24.3 [7.1] 27.1 [7.9]

40,100 [11.75] 39,300 [11.52]

4.6 4.9

39,300 [11.52] 40,000 [11.72]

18.4 [5.4] 20.0 [5.9]

31,600 [9.26] 30,400 [8.91]

3.8 4.0


47,000 [13.77] 47,600 [13.95]

15.3 [4.5] 15.9 [4.7]

60,000 [17.58] 59,700 [17.50]

5.0 5.2

53,900 [15.80] 54,100 [15.86]

23.3 [6.8] 24.6 [7.2]

49,000 [14.36] 48,700 [14.27]

4.4 4.5

49,900 [14.62] 50,100 [14.68]

17.6 [5.2] 18.5 [5.4]

39,000 [11.43] 38,400 [11.25]

3.7 3.8


61,000 [17.88] 62,000 [17.88]

15.9 [4.7] 16.4 [4.8]

70,400 [20.63] 70,800 [20.75]

5.0 5.2

67,000 [19.64] 67,200 [19.70]

23.2 [6.8] 24.3 [7.1]

58,700 [17.20] 59,100 [17.32]

4.5 4.6

63,300 [18.55] 64,000 [18.76]

18.2 [5.3] 19.0 [5.6]

46,500 [13.63] 46,700 [13.69]

3.7 3.8

TS-070 PSCTS-070 ECM HFC-410A

67,500 [19.78] 67,000 [19.64]

14.4 [4.2]15.2 [4.5]

85,800 [25.15] 84,900 [24.88]

5.0 5.0

77,100 [22.60] 77,000 [22.57]

21.6 [6.3] 23.5 [6.9]

69,400 [20.34] 69,000 [20.22]

4.3 4.4

70,800 [20.75] 70,000 [20.52]

16.6 [4.9] 17.8 [5.2]

54,000 [15.83] 53,900 [15.80]

3.6 3.6

Vertical Upflow Model

Overall Cabinet

W D H

006 - 012

in.cm

22.456.8

21.654.9

34.587.6

018in.cm

22.456.8

25.665.1

44.5113.0

024 - 030

in.cm

22.456.8

25.665.1

48.5123.2

036in.cm

25.464.5

30.677.8

50.5128.3

042- 048

in.cm

25.464.5

30.677.8

54.5138.4

060 - 070

in.cm

25.464.5

30.677.8

58.5148.6

Horizontal Model

Overall Cabinet

W D H

006 - 012

in.cm

22.456.8

43.1109.5

17.343.9

018 - 030

in.cm

22.456.8

62.2158.0

19.349.0

036in.cm

25.464.5

71.2180.8

21.354.1

042 - 048

in.cm

25.464.5

76.2193.5

21.354.1

060 - 070

in.cm

25.464.5

81.2206.2

21.354.1

Cooling capacities based upon 80.6°F [27°C] DB, 66.2°F [19°C] WB entering air temperature.Heating capacities based upon 68°F [20°C] DB, 59°F [15°C] WB entering air temperature.All ratings based upon operation at the lower voltage of dual voltage rated models.* ECM motor available on sizes 018 and larger.

Note: Add 4” [10.16cm] to height for vertical downflow models.

Voltage OptionsModel Volts Hz Phase

06 - 018208/230

26560 60

1 1

024 - 036

208/230 265

208/230 460

60 60 60 60

1 1 3 3

042 - 070

208/230 208/230

460575

60 60 6060

1 3 33

24

The Tranquility High Efficiency (TR) Series offers high efficient performance in a simple cabinet design.

The Tranquility High Efficiency Series also offers options that allow for application flexibility. Available options include ClimaDry™ dehumidification, hot water generator, enhanced controls, e-coated air coils, extended range insulation, UltraQuiet package, secondary circulating pump, motorized water valve, automatic water flow valves and high static blowers.

uniTfeaTureS

• Sizes 006 (1/2 ton, 1.8 kW) through 060 (5 tons, 17.6 kW)

• Exceeds ASHRAE 90.1 efficiencies• Galvanized steel construction with attractive matte

black epoxy powder coat paint front access panel• Epoxy powder painted galvanized steel drain pan

• Sound absorbing glass fiber insulation• Unique double isolation compressor mounting for

quiet operation• Insulated divider and separate compressor/air

handler compartments• Copeland scroll compressors (Size 018 and

above)• Microprocessor controls standard (optional DXM

and/or DDC controls)• Field convertible discharge air arrangement for

horizontal units• PSC three-speed fan motor• Internally trapped condensate drain line (vertical

units only)• Eight safeties standard• Extended range (20 to 120°F, -6.7 to 48.9°C)

capable

THeTranquiliTyHigHeffiCienCy(Tr)SerieS


Easy access control box contains advanced digital controls with Remote Service Sentinel Optional Enhanced controls (DXM) & DDC Controllers

Epoxy powder painted drain pan with condensate overflow protection


Easy to remove blower housing for quick service and PSC three-speed fan motor


25

Model Refrigerant




COP


COP


COPBtuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

TR-006 HFC-410A 5,800 [1.70] 13.2 [3.9] 7,500 [2.20] 4.7 6,900 [2.02] 21.1 [6.2] 6,200 [1.82] 4.0 6,200 [1.82] 15.4 [4.5] 4,900 [1.44] 3.4

TR-009 HFC-410A 8,800 [2.58] 13.4 [3.9] 11,600 [3.40] 4.2 10,100 [2.96] 21.0 [6.2] 9,800 [2.87] 3.9 9,300 [2.72] 15.7 [4.6] 7,900 [2.31] 3.4

TR-012 HFC-410A 11,700 [3.43] 13.5 [4.0] 15,200 [4.45] 4.3 13,700 [4.01] 20.8 [6.1] 12,500 [3.66] 3.8 12,000 [3.52] 14.9 [4.4] 9,900 [2.90] 3.2

TR-015 HFC-410A 14,500 [4.25] 15.4 [4.5] 17,300 [5.07] 5.0 16,800 [4.92] 24.5 [7.2] 14,400 [4.22] 4.4 15,000 [4.39] 17.2 [5.0] 11,100 [3.25] 3.6

TR-018 HFC-410A 17,300 [5.07] 14.3 [4.2] 21,500 [6.30] 5.0 20,600 [6.04] 24.2 [7.1] 17,200 [5.04] 4.4 18,400 [5.39] 16.3 [4.8] 13,900 [4.07] 3.4

TR-024 HFC-410A 23,700 [6.94] 13.4 [3.9] 28,500 [8.35] 4.7 26,700 [7.82] 20.9 [6.1] 24,000 [7.03] 4.1 24,900 [7.30] 15.4 [4.5] 18,500 [5.42] 3.3

TR-030 HFC-410A 28,100 [8.23] 13.4 [3.9] 35,100 [10.28] 4.6 31,700 [9.29] 20.1 [5.9] 29,600 [8.67] 4.1 28,900 [8.47] 15.1 [4.4] 23,400 [6.86] 3.4

TR-036 HFC-410A 34,500 [10.11] 13.5 [4.0] 45,200 [13.24] 4.4 38,700 [11.34] 20.7 [6.1] 37,500 [10.99] 4.0 35,300 [10.34] 14.9 [4.4] 29,600 [8.67] 3.3

TR-042 HFC-410A 40,100 [11.75] 13.1 [3.8] 52,700 [15.44] 4.3 45,900 [13.45] 19.6 [5.7] 44,000 [12.89] 3.8 40,500 [11.87] 14.4 [4.2] 34,300 [10.05] 3.2

TR-048 HFC-410A 47,700 [13.98] 13.3 [3.9] 55,900 [16.38] 4.7 54,300 [15.91] 20.5 [6.0] 46,500 [13.62] 4.1 49,000 [14.36] 14.7 [4.3] 36,400 [10.67] 3.4

TR-060 HFC-410A 59,400 [17.40] 13.4 [3.9] 77,000 [22.58] 4.3 66,600 [19.51] 19.9 [5.8] 64,000 [18.75] 3.8 60,100 [17.61] 14.8 [4.3] 50,500 [14.80] 3.1




Dimensional Data

Vertical Upflow Model

Overall Cabinet

W D H

006 - 012in.cm

22.557.2

21.354.1

22.557.2

015 - 030in.cm

22.456.9

22.456.9

40.5102.9

036 - 042in.cm

22.456.9

25.464.5

46.5118.1

048 - 060in.cm

25.464.5

29.173.9

50.5128.3

Horizontal Model

Overall Cabinet

W D H

006 - 012in.cm

22.557.2

40.3102.4

11.529.2

015 - 030in.cm

22.456.9

48.3122.7

17.544.5

036 - 042in.cm

22.456.9

53.1134.9

21.354.1

048 - 060in.cm

25.464.5

67.9172.5

21.354.1

Voltage Options

Model Volts Hz Phase

006 - 024208/230

26560 60

1 1

030 - 036

208/230265

208/230 460

60 6060 60

113 3

042 - 060

208/230208/230

460575

60 6060 60

1333

26

The Tranquility 16 Compact (TC) Series raises the bar for water-source heat pump efficiencies, features and application flexibility. Not only does the Tranquility 16 Compact Series exceed ASHRAE 90.1 efficiencies, but it also uses EarthPure® (HFC-410A) zero ozone depletion refrigerant, making it an extremely environmentally-friendly option.

With one of the smallest cabinets in the industry, the Tranquility 16 Compact (TC) Series will easily fit into tight spaces. Designed to be backward compatible with thousands of older water-source heat pumps, the Tranquility 16 Compact (TC) Series heat pump is packed full of the innovation you have come to expect from the experts at ClimateMaster.

uniTfeaTureS

• Sizes 006 (1/2 ton, 1.8 kW) through 060 (5 tons, 17.6 kW)

• EarthPure® (HFC-410A) refrigerant

• Exceeds ASHRAE 90.1 efficiencies• Galvanized steel construction with attractive matte

black epoxy powder coat paint front access panel• Epoxy powder painted galvanized steel drain pan• Sound absorbing glass fiber insulation• Unique double isolation compressor mounting for

quiet operation• Insulated divider and separate compressor/air

handler compartments• Copeland scroll compressors (size 018 and above)• TXV metering device • Microprocessor controls standard (optional DXM

and/or DDC controls)• Field convertible discharge air arrangement for

horizontal units

THeTranquiliTy16CompaCT(TC)SerieS


Easy access control box contains advanced digital controls with Remote Service Sentinel Optional Enhanced controls (DXM) & DDC Controllers

Epoxy powder painted drain pan with condensate overflow protection


Easy to remove blower housing for quick service and PSC three-speed fan motor


27


Dimensional Data Voltage Options


006 - 024208/230

26560 1

030 - 036

208/230265

208/230460

60606060

1 133

042 - 060

208/230208/230

460575

60606060

1333

HorizontalModel

Overall Cabinet

Width Length Height

006 - 012in.cm

19.148.5

34.186.6

11.128.2

015 - 018in.cm

20.151.1

43.1109.5

17.043.2

024 - 030in.cm

20.151.1

43.1109.5

18.346.5

036 - 042in.cm

20.151.1

47.1119.6

21.053.3

048 - 060in.cm

24.161.2

54.1137.4

21.053.3

072 - 120in.cm

36.392.2

84.9215.6

21.054.9

VerticalUplflowModel

Overall Cabinet

Width Depth Height

006 - 012in.cm

19.148.5

19.148.5

22.055.9

015 - 018in.cm

21.554.6

21.554.6

40.0101.6

024 - 030in.cm

21.554.6

21.554.6

45.0114.3

036 - 042in.cm

21.554.6

26.066.0

44.0111.8

048 - 060in.cm

24.061.0

29.173.9

50.5128.3

Model Refrigerant




COP


COP


COPBtuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

TC-006 HFC-410A 5,800 [1.70] 13.2 [3.9] 7,500 [2.20] 4.7 6,900 [2.02] 21.1 [6.2] 6,200 [1.82] 4.0 6,200 [1.82] 15.4 [4.5] 4,900 [1.44] 3.4

TC-009 HFC-410A 8,800 [2.58] 13.4 [3.9] 11,600 [3.40] 4.2 10,100 [2.96] 21.0 [6.2] 9,800 [2.87] 3.9 9,300 [2.72] 15.7 [4.6] 7,900 [2.31] 3.4

TC-012 HFC-410A 11,700 [3.43] 13.5 [4.0] 15,200 [4.45] 4.3 13,700 [4.01] 20.8 [6.1] 12,500 [3.66] 3.8 12,000 [3.52] 14.9 [4.4] 9,900 [2.90] 3.2

TC-015 HFC-410A 14,500 [4.25] 15.4 [4.5] 17,300 [5.07] 5.0 16,800 [4.92] 24.5 [7.2] 14,400 [4.22] 4.4 15,000 [4.39] 17.2 [5.0] 11,100 [3.25] 3.6

TC-018 HFC-410A 17,300 [5.07] 14.3 [4.2] 21,500 [6.30] 5.0 20,600 [6.04] 24.2 [7.1] 17,200 [5.04] 4.4 18,400 [5.39] 16.3 [4.8] 13,900 [4.07] 3.4

TC-024 HFC-410A 23,700 [6.94] 13.4 [3.9] 28,500 [8.35] 4.7 26,700 [7.82] 20.9 [6.1] 24,000 [7.03] 4.1 24,900 [7.30] 15.4 [4.5] 18,500 [5.42] 3.3

TC-030 HFC-410A 28,100 [8.23] 13.4 [3.9] 35,100 [10.28] 4.6 31,700 [9.29] 20.1 [5.9] 29,600 [8.67] 4.1 28,900 [8.47] 15.1 [4.4] 23,400 [6.86] 3.4

TC-036 HFC-410A 34,500 [10.11] 13.5 [4.0] 45,200 [13.24] 4.4 38,700 [11.34] 20.7 [6.1] 37,500 [10.99] 4.0 35,300 [10.34] 14.9 [4.4] 29,600 [8.67] 3.3

TC-042 HFC-410A 40,100 [11.75] 13.1 [3.8] 52,700 [15.44] 4.3 45,900 [13.45] 19.6 [5.7] 44,000 [12.89] 3.8 40,500 [11.87] 14.4 [4.2] 34,300 [10.05] 3.2

TC-048 HFC-410A 47,700 [13.98] 13.3 [3.9] 55,900 [16.38] 4.7 54,300 [15.91] 20.5 [6.0] 46,500 [13.62] 4.1 49,000 [14.36] 14.7 [4.3] 36,400 [10.67] 3.4

TC-060 HFC-410A 59,400 [17.40] 13.4 [3.9] 77,000 [22.58] 4.3 66,600 [19.51] 19.9 [5.8] 64,000 [18.75] 3.8 60,100 [17.61] 14.8 [4.3] 50,500 [14.80] 3.1



28

Installed System

The Tranquility Vertical Stack (TRM) Series offers an innovative, labor-saving solution for spaces where individual, quiet control of the heating and cooling system is important. Using EarthPure® (HFC-410A)refrigerant, the Tranquility Vertical Stack (TRM) Series not only protects the environment, it does so while delivering unprecedented comfort, efficiency, and reliability.

uniTfeaTureS

• Sizes 09 (3/4 ton, 2.6 kW) through 36 (3 ton, 10.6 kW)

• Environmentally-friendly EarthPure® (HFC-410A) zero ozone depletion refrigerant

• High efficiency rotary and scroll compressors• Exceeds ASHRAE 90.1 efficiencies• Removable chassis allows staged installation and

ease of maintenance • Galvanized steel cabinet• Unique double isolation compressor mounting for

quiet operation• TXV metering device • Unit or remote-mounted controls available• Microprocessor controls standard (optional DXM

and/or DDC controls)• LonWorks, BACnet, Modbus and Johnson N2

compatibility options for DDC controls• Unit Performance Sentinel performance

monitoring system• Attractive return air panel with hinged access door

(“G” panel)• Multiple supply air discharge options• Stainless steel braided hose kits for connection

from piping risers to chassis • Eight safeties standard• Wide variety of options including disconnect

switch and extended range

TranquiliTyVerTiCalSTaCk(Trm)SerieS

Exclusive dual-level compressor isolation lowers vibration and reduces noise for quiet operation

Removable chassis allows staged installation and ease of maintenance/service once installation is complete

Advanced digital controls with Remote Service Sentinel. Shown with optional DDC Controller (Optional Enhanced controls (DXM) also available)

Integrated Drain Pan with condensate overflow protection (Optional Stainless Steel Drain Pan)

Torsion-flex blower motorsTRM09-12

29

Model Refrigerant




COP


COP


COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

TRM-09 HFC-410A 8,800 [2.58] 13.0 [3.8] 12,500 [3.66] 4.6 10,100 [2.93] 19.5 [5.7] 9,800 [2.87] 3.8 9,300 [2.73] 14.7 [4.3] 7,200 [2.11] 3.1

TRM-12 HFC-410A 11,600 [3.40] 13.0 [3.8] 15,800 [4.63] 4.5 13,700 [4.02] 20.0 [5.9] 12,700 [3.72] 3.8 12,200 [3.58] 15.0 [4.4] 9,500 [2.78] 3.1

TRM-15 HFC-410A 13,800 [4.05] 13.0 [3.8] 19,600 [5.74] 4.7 16,500 [4.84] 20.0 [5.9] 15,500 [4.54] 3.9 15,200 [4.46] 14.6 [4.3] 11,500 [3.37] 3.1

TRM-18 HFC-410A 16,700 [4.89] 13.0 [3.8] 22,600 [6.62] 4.7 19,600 [5.74] 19.5 [5.7] 18,200 [5.33] 3.8 17,600 [5.16] 14.6 [4.3] 14,000 [4.10] 3.1

TRM-24 HFC-410A 22,100 [6.48] 13.0 [3.8] 29,400 [8.62] 4.5 26,400 [7.74] 20.0 [5.9] 23,100 [6.77] 3.8 23,600 [6.92] 14.8 [4.3] 18,000 [5.28] 3.1

TRM-30 HFC-410A 27,100 [7.94] 13.0 [3.8] 33,100 [9.70] 4.6 30,600 [8.97] 18.6 [5.5] 27,700 [8.12] 4.0 29,200 [8.56] 16.0 [4.7] 20,600 [6.04] 3.1

TRM-36 HFC-410A 32,000 [9.38] 12.5 [3.7] 39,500 [11.58] 4.6 36,700 [10.76] 18.8 [5.5] 32,000 [9.38] 3.8 33,000 [9.67] 14.3 [4.2] 25,000 [7.33] 3.1




* Not including risers or flanges.** 80” [203.2cm] also standard.

ModelOverall Cabinet*

W D H **

09 - 12in.cm

17.043.2

17.043.2

88.0223.5

15 - 18in.cm

20.050.8

20.050.8

88.0223.5

24 - 36in.cm

24.061.0

24.061.0

88.0223.5


09 - 36208/230

2656060

11

Dimensional Data Voltage Options

30

The Tranquility Console (TRC) Series provides a high efficiency WSHP “ductless” solution for spaces where individual, quiet control of the heating and cooling system is important. Tranquility Console Series units are especially ideal where ceiling height and space are limited, or when preserving the integrity of an existing structure. The Tranquility Console Series exceeds ASHRAE 90.1 efficiencies, yet maintains small cabinet dimensions. Using EarthPure® (HFC-410A) refrigerant, the Tranquility Console Series not only protects the environment, it does so while delivering unprecedented comfort, efficiency, and reliability.

uniTfeaTureS

• Sizes 09 (3/4 ton, 2.6 kW) through 18 (1-1/2 ton, 5.3 kW)

• Environmentally-friendly EarthPure® (HFC-410A) zero ozone depletion refrigerant

• Two-piece chassis/cabinet design

• Slope top with aluminum rigid bar supply air grille and aluminum control door

• TXV metering device • Extended range (20 to 120°F, -6.7 to 48.9°C)

operation• Advanced digital auto or manual change-over

unit mounted control with temperature display, speed selection and fault indication

• Remote-mounted control available • Microprocessor controls standard (optional DXM


compatibility options for DDC controls• Right or left-hand piping arrangement• Front or bottom return air• Unit Performance Sentinel performance

monitoring system• Eight safeties standard• Wide variety of options including e-coated air

coils and UltraQuiet construction

TranquiliTyConSole(TrC)SerieS

Optional motorized damper for outside air intake for improved air quality

Optional insulated water circuit for extended range applications

Advanced digital controls with Remote Service Sentinel. (Optional Enhanced controls (DXM) & DDC Controllers)

Unit mounted digital control available in manual and auto changeover

Shown with optional return air grille

31

Model Refrigerant




COP


COP


COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

TRC-09 HFC-410A 8,600 [2.52] 13.3 [3.9] 11,400 [3.34] 4.6 9,200 [2.70] 18.6 [5.5] 9,500 [2.78] 4.0 8,800 [2.58] 14.9 [4.4] 7,300 [2.14] 3.3

TRC-12 HFC-410A 11,300 [3.31] 13.3 [3.9] 14,900 [4.37] 4.9 12,500 [3.66] 18.7 [5.5] 12,100 [3.55] 4.1 11,800 [3.46] 15.1 [4.4] 9,300 [2.73] 3.3

TRC-15 HFC-410A 14,100 [4.13] 13.5 [4.0] 18,200 [5.33] 5.1 16,600 [4.87] 21.3 [6.2] 14,800 [4.34] 4.3 15,100 [4.43] 15.8 [4.6] 11,400 [3.34] 3.5

TRC-18 HFC-410A 16,200 [4.57] 13.0 [3.8] 20,100 [5.89] 4.5 17,600 [5.16] 19.5 [5.7] 16,500 [4.84] 4.0 16,500 [4.84] 15.0 [4.4] 13,200 [3.87] 3.4




Dimensional Data

ModelOverall Cabinet

W D H

5” [12.7]

Subbase

in.cm

48121.9

1230.5

2666.0

NoSubbase

in.cm

48121.9

1230.5

2153.3


09-12115

208/230265

606060

111

15-18208/230

2656060

11

Voltage Options

Note: Add 6” [15.2cm] to width for size 18.

32 TranquiliTyCompaCT(TCH)SerieS

Available in sizes 6 tons (21.1 kW) through 10 tons (35.2 kW) with multiple cabinet configurations, the Tranquility Compact (TCH) Series offers a wide range of units for most any installation. The Tranquility Compact Series has an extended range refrigerant circuit, capable of ground loop (geothermal) applications (may require optional extended range insulation), ground water (geothermal) applications, as well as water loop (boiler-tower) applications. Standard features are many. Microprocessor controls, galvanized steel cabinet, epoxy powder coat painted front access panel, galvanized steel with epoxy powder coat painted drain pan and TXV refrigerant metering device are just some of the features of the flexible Tranquility Compact Series.

uniTfeaTureS

• Horizontal sizes 072 (6 tons, 21.1 kW), 096 (8 tons, 28.1 kW), 120 (10 tons, 35.2 kW)

• Unit configuration can be ordered with left or right return air and straight or back supply air discharge. Discharge is field convertible. Field conversion uses all existing parts including panels and belts

• Electrical box is on right side and can be field converted to left side of unit

• Electric power can enter from either side of front• Water can be connected to either side• Copeland scroll compressors• Dual refrigeration circuits (All Models)• Exceeds ASHRAE 90.1 efficiencies• Galvanized steel construction with attractive matte

black epoxy powder coat painted front access panel

• Insulated divider and separate compressor/air handler compartments

• TXV metering device • Extended range (20 to 120°F, -6.7 to 48.9°C)

operation (may require optional extended range insulation)

Condensate overflow is one of the 8 standard safeties provided by the microprocessor controls in all TCH Series units

Dual compressor refrigeration circuit

Large capacity (up to 10 tons)

Belt drive blower with high efficiency motor and multiple pulley adjustments

Galvanized steel cabinet

Optional insulated water/refrigerant circuits allow extended range operation (ground loop applications)

33



Cooling capacities based upon 80.6°F [27.02°C] DB, 66.2°F [19.02°C] WB entering air temperature.Heating capacities based upon 68°F [20.02°C] DB, 59°F [15.02°C] WB entering air temperature.All ratings based upon operation at lower voltage of dual voltage rated models.

Dimensional Data

Horizontal Model

Overall Cabinet

W D H

072 - 120in.cm

36.392.2

84.9215.6

21.654.9

Horizontal Model

Volts Hz Phase

072 - 120208/230

460575

606060

333

Voltage Options

Model Refrigerant




COP


COP


COPBtuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

TCH-072 HFC-410A 69,000 [20.22] 13.3 [3.9] 92,500 [27.11] 5.0 78,500 [23.01] 19.7 [5.8] 75,500 [22.13] 4.4 71,000 [20.80] 14.6 [4.3] 58,000 [17.00] 3.5

TCH-096 HFC-410A 95,000 [27.84] 13.7 [4.0] 123,000 [36.04] 5.0 104,500 [30.63] 20.0 [5.9] 101,000 [29.60] 4.4 98,000 [28.72] 15.2 [4.5] 77,000 [22.57] 3.6

TCH-120 HFC-410A 119,000 [34.88] 13.3 [3.9] 160,000 [46.89] 4.6 134,000 [39.27] 19.3 [5.7] 132,500 [38.83] 4.0 122,500 [35.90] 14.5 [4.2] 103,000 [30.19] 3.3

34

The award winning Tranquility Large (TL) Series raises the bar for water-source heat pump efficiencies, features and application flexibility. Not only does the Tranquility Large Series exceed ASHRAE 90.1 efficiencies, but it also uses EarthPure® (HFC-410A) zero ozone depletion refrigerant, making it an extremely environmentally-friendly option. Tranquility Large Series is eligible for additional LEED® (Leadership in Energy and Environmental Design) points because of the “green” technology design.

uniTfeaTureS

• Vertical sizes 084 (7 tons, 24.6 kW) through 300 (25 tons, 87.9 kW)

• Unit configuration can be ordered with, or converted to front or back return and top, front, or back discharge. Field conversion uses all existing parts including panels and belts

• Electrical box can be field converted to be on front or back of unit

• Electric power can enter from any side of unit• Water and drain can be connected to either side• Dual refrigeration circuits (TL168, 192, 240, 300)• Exceeds ASHRAE 90.1 efficiencies• TXV metering device • Extended range (20 to 120°F, -6.7 to 48.9°C

operation)• Microprocessor controls standard (optional DXM


compatibility options for DDC controls• Unit Performance Sentinel performance

monitoring system

TranquiliTylarge(Tl)SerieS

Condensate overflow is one of the 8 standard safeties provided by the microprocessor controls in all TL Series units

Dual compressor refrigeration circuit in TL 168-300 equipment single compressor refrigeration circuit in TL 084-150

Optional insulated water/refrigerant circuits allow extended range operation (ground loop applications)

Belt drive blowers with high efficiency motors and multiple pulley adjustments

Wide variety of vertical configurations

Large capacity (up to 25 tons, 87.97 kW)

Galvanized steel cabinet with baked-on epoxy powder finish on all access panels

35


AHRI/ISO/ASHRAE 13256-1 Data (Engish (IP) Units & Metric (SI) Units)


Dimensional Data

Vertical Model

Overall Cabinet

W D H

084 -150

in.cm

53.1134.9

34.086.4

79.0200.7

168 -300

in.cm

106.7270.9

34.086.4

79.0200.7

Vertical Model

Volts Hz Phase

084 - 300

208/230460575

380/420

60606060

3333

Voltage Options

Model Refrigerant




COP


COP


COPBtuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

Btuh[kW]

Btuh/W[W/W]

Btuh[kW]

TLV-084 HFC-410A 82,000 [24.03] 15.2 [4.5] 101,000 [29.60] 4.8 87,500 [25.65] 21.0 [4.3] 83,500 [24.33] 4.3 83,000 [24.33] 16.5 [4.8] 65,500 [19.20] 3.6

TLV-096 HFC-410A 94,000 [27.55] 15.0 [4.4] 118,000 [34.58] 4.7 102,500 [30.04] 20.5 [4.2] 96,500 [28.58] 4.2 97,500 [28.58] 16.5 [4.8] 76,500 [22.42] 3.6

TLV-120 HFC-410A 118,000 [34.58] 15.0 [4.4] 144,000 [42.20] 5.0 133,000 [38.98] 21.0 [4.2] 118,000 [34.58] 4.2 120,000 [35.17] 16.5 [4.8] 93,000 [27.26] 3.7

TLV-150 HFC-410A 150,000 [43.96] 14.0 [4.1] 186,000 [54.51] 4.7 170,000 [49.82] 20.0 [4.2] 155,000 [45.43] 4.2 156,000 [45.72] 15.8 [4.6] 122,000 [35.76] 3.6

TLV-168 HFC-410A 166,000 [48.65] 15.5 [4.5] 204,020 [59.80] 4.9 177,000 [51.87] 21.4 [4.4] 169,000 [49.53] 4.4 168,000 [49.24] 16.8 [4.9] 132,500 [38.83] 3.7

TLV-192 HFC-410A 190,000 [55.69] 15.3 [4.5] 238,360 [69.86] 4.8 207,000 [60.67] 20.9 [4.3] 195,000 [57.15] 4.3 197,000 [57.74] 16.8 [4.9] 155,000 [45.43] 3.7

TLV-240 HFC-410A 238,500 [69.90] 15.3 [4.5] 291,000 [85.29] 5.1 269,000 [78.84] 21.4 [4.3] 238,000 [69.90] 4.3 242,500 [71.07] 16.8 [4.9] 188,000 [55.10] 3.8

TLV-300 HFC-410A 300,000 [87.93] 14.0 [4.1] 372,000 [109.03] 4.7 340,000 [99.65] 20.0 [4.2] 310,000 [90.86] 4.2 312,000 [91.44] 15.8 [4.6] 244,000 [71.51] 3.6

36

The Tranquility Modular Water-to-Water (TMW) Series offers high efficiency and high capacity with advanced features, quiet operation and application flexibility at competitive prices. ClimateMaster’s Tranquility Modular Water-to-Water Series can be used for radiant floor heating, snow/ice melt, chilled water for fan coils, industrial process control, potable hot water generation*, hot/chilled water for make-up air, and many other types of HVAC and industrial applications that require cost effective heated or chilled water.

uniTfeaTureS

• Sizes 036 (3 tons, 10.6 kW) through 340 (28 tons, 100 kW)

• Copeland scroll compressor(s)• Dual independent refrigeration circuits on size

120 and 340 (28 tons, 100 kW)• Exclusive single side service access (front of unit)

allows multiple units to be installed side-by-side for large capacity installations

• Top water connections on sizes 170 (14 tons, 50 kW) and 340 (28 tons, 100 kW), staggered for ease of manifolding multiple units

• Exceeds ASHRAE 90.1 efficiencies• Heavy gauge galvanized steel construction with

polyester powder coat paint and stainless steel front access panels

• Insulated compressor compartment• Small footprint• TXV metering devices• Extended range (20 to 110°F, -6.7 to 43.3°C)

operation• Microprocessor controls standard (optional DXM


compatibility options for DDC controls

* Requires field supplied secondary heat exchanger.

TranquiliTymodularwaTer-To-waTer(Tmw)SerieS

Copeland scroll compressors with dual-isolation mounting for quiet operation

Advanced digital controls with Remote Service Sentinel and compressor “run” and “fault” LED

TMW Series design allows for single side service access. Units may be installed side-by-side

Extended range insulated water/refrigerant circuit standard

Optional Enhanced controls (DXM) & DDC Controllers

Small footprint with convenient front service access (TMW036 shown)

37


AHRI/ISO/ASHRAE 13256-2 Data (English (IP) Units*)

Dimensional Data


W D H

036-060in.cm

25.4645

30.6778

33.083.8

120in.cm

52.9134.4

30.6778

37.0940

170-340in.cm

26.3669

45.11146

64.5163.8

All ratings based upon operation at the lower voltage of dual voltage rated models.* Indoor = Load side heat exchanger; Outdoor = Source side heat exchanger.

Model Volts Phase

036

208/230265

208/230460575

11333

060-120

208/230208/230

460575

1333

170-340208/230

460 575

3 3 3

Voltage Options

Model Refrigerant


Cooling Heating Cooling Heating Cooling Heating

Indoor 53.6°FOutdoor 86°F

Indoor 104°FOutdoor 68°F





CapacityBtuh

EERBtuh/W

CapacityBtuh

COPCapacity

BtuhEER

Btuh/WCapacity

BtuhCOP

CapacityBtuh

EERBtuh/W

CapacityBtuh

COP

TMW-036 HFC-410A 33,000 14.6 44,000 5.0 37,000 23.1 36,000 4.0 34,000 16.8 28,000 3.1

TMW-060 HFC-410A 55,400 14.1 79,000 4.7 62,600 21.7 61,400 3.8 58,000 15.4 51,000 3.0

TMW-120 HFC-410A 110,800 13.8 158,000 4.6 125,200 21.3 122,900 3.7 116,000 15.1 102,000 3.0

TMW-170 HFC-410A 126,000 13.6 168,000 4.4 141,200 19.7 139,000 3.8 133,000 15.6 110,800 3.0

TMW-340 HFC-410A 253,500 13.6 336,200 4.4 282,000 19.6 277,000 3.7 266,600 15.6 220,000 3.0

Model Refrigerant


Cooling Heating Cooling Heating Cooling Heating

Indoor 12°COutdoor 30°C






CapacityWatts

EERW/W

CapacityWatts

COPCapacity

WattsEERW/W

CapacityWatts

COPCapacity

WattsEERW/W

CapacityWatts

COP

TMW-036 HFC-410A 9,672 4.3 12,896 5.00 10,844 6.77 10,551 4.00 9,965 4.92 8,206 3.10

TMW-060 HFC-410A 16,237 4.13 23,154 4.70 18,347 6.36 17,995 3.8 16,999 4.51 14,947 3.00

TMW-120 HFC-410A 32,474 4.0 13,572 4.60 36,694 6.24 36,020 3.74 33,998 4.42 29,895 3.00

TMW-170 HFC-410A 37,163 4.0 49,414 4.40 41,383 5.77 40,739 3.80 38,980 4.57 32,474 3.00

TMW-340 HFC-410A 74,297 4.0 98,535 4.40 82,649 5.74 81,184 3.70 78,136 4.57 64,478 3.00

TMW 036 - 340 Performance Data ASHRAE/AHRI/ISO 13256-2 60Hz Metric (SI) Units

38

The Rooftop (TRE) Series provides an economical solution for today’s HVAC challenges. The TRE product line offers the option of introducing a fixed amount of outside air year-round or a modulating Economizer to provide free cooling when outdoor conditions are favorable. TRE units are designed for an extended range of source water temperatures, making it suitable for closed-loop, or ground source closed-loop systems. With high efficiency scroll compressors and belt drive motors, the TRE product line offers 13+ EER and 4+ COP.

uniTfeaTureS

• Sizes 036 (3 tons, 10.6 kW) through 240 (20 tons, 70.4 kW)

• EarthPure® (HFC-410A) zero ozone depletion refrigerant

• Exceeds ASHRAE 90.1 efficiencies (40% better than standard rooftop units!)


• Copeland Scroll compressors (dual circuited on sizes 096 and larger)



• Extended range operation package standard • Double wall construction for access doors and

stainless steel hardware• Belt-drive blowers with various configurations for

RPM/ESP settings• High/low pressure switches and electronic

condensate overflow sensor standard• Eight safeties standard• Rx ERV option handles up to 100% outside air

THeroofTop(Tre)SerieS

Slide out blower assembly featuring high efficiency motors/variable pitch sheaves

ABS gear driven dampers

Integrated lifting lugs

Heavy duty cabinet, powder coated, stainless steel hinges

Copeland Scroll compressors (dual circuited on 8 ton and larger)

Fully insulated including base pan

2” fiberglass filters standard. Optional 4” and pleated filters (pleated filters shown)

TRE with Enthalpy Economizer option shown.

39

Model Refrigerant




COP


COP

Capacity EER COP

COPBtuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

Btuh [kW]

Btuh/W [W/W]

Btuh [kW]

TRE-036 HFC-410A 36,000 [10.56] 14.5 [4.2] 44,000 [12.90] 5.1 41,000 [12.02] 22.1 [6.5] 36,500 [10.70] 4.5 36,000 [10.56] 16.8 [4.9] 29,000 [8.50] 3.7

TRE-048 HFC-410A 50,000 [14.65] 14.7 [4.3] 61,500 [18.02] 4.8 56,500 [16.56] 21.5 [6.3] 50,000 [14.65] 4.2 51,500 [15.09] 16.3 [4.8] 39,000 [11.43] 3.5

TRE-060 HFC-410A 63,000 [18.46] 16.0 [4.7] 75,000 [22.00] 5.2 72,000 [21.10] 24.0 [7.0] 62,000 [18.17] 4.6 64,000 [18.76] 18.0 [5.3] 47,000 [13.77] 3.7

TRE-072 HFC-410A 69,000 [20.22] 15.2 [4.5] 90,000 [26.38] 5.2 77,500 [22.71] 21.6 [6.3] 74,000 [21.69] 4.6 71,000 [20.81] 16.4 [4.8] 58,000 [17.00] 3.7

TRE-096 HFC-410A 100,000 [29.31] 14.3 [4.2] 114,000 [33.41] 4.5 111,950 [32.81] 21.0 [6.2] 94,500 [27.70] 4.0 104,000 [30.48] 15.9 [4.7] 76,200 [22.33] 3.3

TRE-120 HFC-410A 126,000 [36.93] 1 4.2 [4.2] 154,000 [45.13] 4.5 145,500 [42.64] 21.0 [6.2] 126,500 [37.07] 4.0 132,500 [38.83] 15.9 [4.7] 101,000 [29.60] 3.3

TRE-144 HFC-410A 134,000 [39.27] 13.8 [4.0] 172,000 [50.41] 4.6 150,500 [44.11] 20.0 [5.9] 140,000 [41.03] 4.0 139,000 [40.74] 15.5 [4.5] 109,000 [31.94] 3.3

TRE-168 HFC-410A 175,000 [51.29] 15.0 [4.4] 206,700 [60.58] 5.0 187,000 [54.80] 20.9 [6.1] 168,000 [49.24] 4.5 177,500 [52.02] 16.5 [4.8] 129,500 [37.95] 3.7

TRE-240 HFC-410A 241,000 [70.63] 13.6 [4.0] 287,000 [84.11] 4.8 276,000 [80.89] 19.3 [5.7] 230,000 [67.41] 4.2 249,500 [73.12] 15.0 [4.4] 182,400 [53.46] 3.4

AHRI/ISO/ASHRAE 13256-1 Data (English (IP) Units & Metric (SI) Units)*

Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature.Heating capacities based upon 68°F DB, 59°F WB entering air temperature.All ratings based upon operation at lower voltage of dual voltage rated models

* Does not include optional rain hood.

Dimensional Data


W D* H

03 - 07in.cm

43.2109.7

80.1203.5

39.4100.1

08 - 12in.cm

49.2125.0

90.1228.9

45.4115.3

15 - 20in.cm

87.1221.2

90.1228.9

50.6128.5



03208/230

46060 60

3 3

04 - 20208/230

460 575

60 60 60

333

Voltage Options

40

The energy recovery wheel inside the ERV unit transfers energy from the warmer to the cooler air stream through counter-flowing supply and exhaust air streams through the slowly rotating wheel (less than 60 revolutions per minute). The large energy transfer surface arranged to provide laminar air flow through the wheel causes the constant flow of recovered energy to represent up to 80% of the difference in total energy contained within the two air streams. The Rx (ERV) Series is designed to be mated to the TRE Series rooftop unit for maximum energy efficiency in a make-up air unit, up to 100% outside air.

uniTfeaTureS

• Sizes 1,000 through 10,000 CFM of outdoor air mixed with return air or up to 100% outside air

• All of the features of the TRE Series PLUS energy recovery

• 20+ (Combined) EER substantially reduces the cost of preconditioning outside air

• Avoids using large gas makeup air units and complicated refrigeration controls to handle outside air

• Simple operation facilitates ease of maintenance and troubleshooting

• Allows the designer to provide water-source equipment for all HVAC needs

• Decreases building equipment tonnage required, which reduces installation costs

• Can cut loop costs up to 50% for ground loop (geothermal) applications by reducing equipment tonnage required

• Uses ARI-1060 rated wheel technology• Available with silica gel or molecular sieve wheel• Available in stand alone, curb mounted

& integrated, or mounted to rooftop unit configurations

• Finish matches TRE Series rooftop• Optional factory-installed pre-heater available• Hinged panels at all service entries

• Centrifugal belt-driven forward-curved blowers with adjustable pulleys and isolation pads. High efficiency motors are thermally protected

• Easy access controls with optional ERV fault indicators. Six-pin Molex connector ties ERV controls to TRE Series rooftop unit controls

• 2” pleated pre-filters for outside air with 2” pleated filters on exhaust air help keep the wheel clean. Up to Merv 13 filter compatible

• Heavy duty base rails for easy lifting and rigging• Hinged access doors with 1/4 turn spring-

loaded latches• Exhaust and supply air streams have back-draft

dampers to prevent air penetration during off cycles

• The energy recovery wheel transfers energy from the warmer to cooler air streams at a nominal up to 80% efficiency and is ARI-1060 certified

• Slide out wheel assembly makes cleaning and maintenance easy

THerx(erV)module

Stand alone ERV module

Add on module for TRE unit

41


Air Flow Range, Voltages, and Pre-Heaters (English (IP) Units & Metric (SI) Units)

Dimensional Data, Stand Alone ERV Module

ERVCabinet

Overall Cabinet

Height in. [CM]

Width in. [CM]

Length in. [CM]

Weight lb. [CM]

ERV “A” Cabinet

50 [127]

46 [116.8]

66 [167.64]

1472 [667.7]

ERV “B” Cabinet

65 [165.1]

68 [172.7]

78 [198.1]

2409 [1092.7]

ERV “C” Cabinet

77 [195.5]

94 [238.8]

94 [238.8]

3452 [1565.8]

ERV “D” Cabinet

89 [226.0]

108 [274.3]

106 [269.2]

4924 [2233.5]

Model Voltage CFM

ERV “A” Cabinet

208/230/460 60 Hz

1000 - 2000

ERV “B” Cabinet 3000 - 4000

ERV “C” Cabinet 5000 - 7000

ERV “D” Cabinet 8000 - 10000

Energy recovery component certified to ARI standard 1060-2000.Energy recovery unit ETL listed.Contact factory for performance at given conditions.

42

100%ouTdoorairappliCaTionS-VerTiCaldoaSSySTemS

ClimateMaster Dedicated Outdoor Air Systems (TO) Series provides the most complete solution for your water-source application. Our many options and configurations allow the design for outdoor air requirements to be incorporated into the water loop system, further enhancing the advantages of a WSHP application. The ability to precisely control leaving air dew point temperature in summer, handle extremely cold entering air temperatures in winter, and perform at part load conditions give designers unmatched flexibility in building design, Indoor Air Quality (IAQ) and energy efficiency.

uniTfeaTureS

Leaving Air Temperature Control

• Supply air temperature controlled to ±0.2°F (±0.1°C)

• Substantial energy savings and ASHRAE 90.1 compliant

• Conditioned outdoor air can be introduced directly into space

Evaporator Coil

• Raised lance fins, rifled tubes maximize moisture removal

Drain Pan

• Stainless steel pan minimizes corrosion• Sloped design avoids hazardous puddling

Fans

• Forward curved centrifugal blowers or plenum fans

Refrigerant Reheat Coil

• Sized for neutral LAT (65 to 80°F, 18 to 27°C) with ±0.2°F (±0.1°C) control

• Adequate coil separation avoids re-hydration

Scroll Compressor

• State-of-the-art compressor technology for highest efficiency and reliability

• Quiet operation• Units 8 tons (28kW) and larger, multiple

compressors are staged to match the load

Electrical Service

• Single point connection, including heat – all units

Cabinet Construction

• Single wall construction for sizes up to 15 tons• Double-wall construction standard on 20, 25 and

30 ton (70, 88 and 105 kW) units• Corrosion-resistant galvanized construction• All serviceable elements accessible from rear and

LH side of unit

Insulation

• Closed cell foam or polystyrene board in double-wall construction

• Superior to fiberglass insulation – eliminates fiber-release into air

• Meets ASTM mold, mildew, moisture resistance specifications

Refrigeration Circuit

• Dissipates captured heat into water loop• Unique design - no reversing valve• Modulating hot gas reheat

Filters

• 4” deep extended surface, pre-filters (MERV 7)

Additional Options Increase Flexibility

• Optional coil coatings available for corrosive environments

• Single phase available on 4 and 5 ton (14 and 18 kW) units

• Optional power disconnects (fused and non-fused)• Units available in 4 - 30 tons (14 to 105 kW)• Contact factory for non-standard options

dediCaTedouTdoorairSySTemS(To)SerieS

43

Refrigerant Circuit Schematic with LAT Control: Cooling Mode

COMPRESSOR

RECEIVER

COIL

90°F WATER IN

100°FWATER OUT

55°F 12.8°C LAPD

EEV

WATER

WARMHUMID AIR

95 °F 35 °C DB@78 °F 26°C WB

WARMHUMID AIR

75 °F 24 °C DB50% RH

HOT GASREHEAT

WATERCONDENSER

COOLINGEVAPORATOR

HEATINGEVAPORATOR

(INACTIVE)

100°FWATER IN

AIRCOI

38ºC

38ºC 38ºC

32ºC

L

COIL

WATER

100°FWATER OUT

COLDWINTER

AIR

(PART LOAD)

COMPRESSOR

RECEIVER

COIL

60°

F 18°C

F 15.6°CWATER INWATER OUT

EEV

WATER

EXACT LAT 75° F DB

24°C DB

HOT GASREHEAT

WATERCONDENSER

COOLINGEVAPORATOR

(INACTIVE)

HEATINGEVAPORATOR

COIL

WATERWATER IN

65F 18°C65 °°

F 14°C57°

WATER OUT

AIRCOIL

40°F 4.4°C EAT

Refrigerant Circuit Schematic with LAT Control: Heating Mode


W D H

04 - 05in.cm

34.086.4

38.998.8

60.1152.7

08 - 15in.cm

41.9106.4

46.0116.8

80.1203.5

20 - 30in.cm

77.3196.3

61.5156.2

70.0177.8

Dimensional Data

44

100%ouTdoorairappliCaTionS-HorizonTaldoaSSySTemS

ClimateMaster Dedicated Outdoor Air Systems (TO) Series provides the most complete solution for your water-source application. Our many options and configurations allow the design for outdoor air requirements to be incorporated into the water loop system, further enhancing the advantages of a WSHP application. The ability to precisely control leaving air dew point temperature in summer, handle extremely cold entering air temperatures in winter, and perform at part load conditions give designers unmatched flexibility in building design, Indoor Air Quality (IAQ) and energy efficiency.

uniTfeaTureS

Precise Leaving Air Temperature Control

• Air temperature leaving dehumidifier controlled to ±0.2°F (±0.1°C)

• Substantial energy savings• Conditioned outdoor air can be introduced

directly into space

Evaporator Coil

• Raised lance fins, rifled tubes maximize moisture removal

• Very high MRE’s (Moisture Removal Efficiency)

Drain Pan

• Stainless steel pan minimizes corrosion

Refrigerant Reheat Coil

• Sized for neutral LAT (65 to 80°F, 18 to 27°C)• Air separation avoids condensate re-vaporization

Scroll Compressor

• State-of-the-art compressor technology for highest efficiency and reliability

• Quietest operation for less noise• Over 5 tons (18 kW), multiple compressors are

staged to match the load

Fans

• Forward curved centrifugal blowers• Backward-inclined centrifugal fans, plug fans on

larger units

Electrical Service

• Single point power connection, for all units

Controls

• Simple ladder logic addresses wide variety of conditions

• System can handle dehumidification, cooling, and heating

• Occupancy contact ensures outdoor air enters only when needed

Cabinet Construction

• Corrosion-resistant galvanneal with powder coat finish

• Meets 1000 hour salt spray test• All serviceable elements accessible from one side

of unit• Double-wall construction• R-5 insulation

Refrigeration Circuit

• Dissipates captured heat into water loop• Unique design - no reversing valve• Modulating hot gas reheat

Filters

• 4” deep extended surface pre-filters (MERV 7)

Outdoor Design (Rooftop Models)

• Rain hood, aluminum mist eliminator• Stainless steel fasteners• Isolation dampers• TEFC motors

Rx Energy Recovery Wheel (Optional)

• Sensible and latent heat recovery• Significant energy savings by lowering

operating costs

Additional Options Increase Flexibility

• Top, bottom or end horizontal air discharge• Horizontal or Rooftop configurations available• Optional coil coatings available for

corrosive environments• Optional power disconnects (fused and non-fused)• Contact factory for non-standard options

dediCaTedouTdoorairSySTemS(To)SerieS

45

(Optional) Energy Recovery Wheel Operation

O/A20°16°50% RH

Off Wheel66°F 19°C DB@ F 24°C DB@

F 9°C WBF 13°C WB

F -7°C DB@F -9°C WB

F -2°C DB

F 24°C DB@

F 24°C DB@

56°

E/A1000 CFM28°94% RH

S/A1000 CFM

75°49°F 9°C Dewpoint52% RH

R/A75°50% RH

Evap. Coil(Inactive)

Reheat Coil(Inactive)

Aux.Heating

WINTER

Energy Recovery Wheel85% Sensible Efficiency78% Latent Efficiency

82% Overall

O/A88°79°68% RH

Off Wheel77°67°

E/A1000 CFM86°F 30°C DB

F 31°C DB@

F 25°C DB@

F 26°C WB

F 19°C WBF 12°C DB@ F, 24°C DB@F 12°C WB

64% RH

S/A1000 CFM

75°F 24°C DB@54°F 12°C Dewpoint

50% RH

R/A78°F 26°C DB55% RH

Evap. CoilAux. Heating

(Inactive)Reheat

Coil

SUMMER


80% Overall

Off Evap.54°53°

Off Reheat75°54°F 12°C Dewpoint

Off Aux Heat75°49°

O/A20°16°50% RH

Off Wheel66°F 19°C DB@ F 24°C DB@

F 9°C WBF 13°C WB

F -7°C DB@F -9°C WB

F -2°C DB

F 24°C DB@

F 24°C DB@

56°

E/A1000 CFM28°94% RH

S/A1000 CFM

75°49°F 9°C Dewpoint52% RH

R/A75°50% RH

Evap. Coil(Inactive)

Reheat Coil(Inactive)

Aux.Heating

WINTER


82% Overall

O/A88°79°68% RH

Off Wheel77°67°

E/A1000 CFM86°F 30°C DB

F 31°C DB@

F 25°C DB@

F 26°C WB

F 19°C WBF 12°C DB@ F, 24°C DB@F 12°C WB

64% RH

S/A1000 CFM

75°F 24°C DB@54°F 12°C Dewpoint

50% RH

R/A78°F 26°C DB55% RH

Evap. CoilAux. Heating

(Inactive)Reheat

Coil

SUMMER


80% Overall

Off Evap.54°53°

Off Reheat75°54°F 12°C Dewpoint

Off Aux Heat75°49°

Dimensional Data - Without Wheel


W D H

02 - 05in.cm

43.1109.5

102.3259.8

43.9111.5

08 - 15in.cm

55.1149.0

129.6329.2

48.6123.4

20in.cm

60.5153.7

138.1350.8

52.6133.6

25 - 30in.cm

67.1170.4

144.7367.5

63.1160.3

36 - 46in.cm

78.8200.2

153.1388.9

75.4191.5

50 - 60in.cm

93.5237.5

165.2419.6

83.6212.3

Dimensional Data - With Wheel


W D H

02 - 03in.cm

55.1140.0

123.8314.5

48.6123.4

05in.cm

60.5153.7

130.3331.0

52.6133.6

08in.cm

67.1170.4

137.8350.0

63.1160.3

10in.cm

78.5199.4

140.8357.6

73.4186.4

15in.cm

93.5237.5

153.7390.4

83.6212.3

20 - 25in.cm

96.5245.1

164.2417.1

92.6235.2

THerigHTCHoiCe

ClimateMaster is the world’s largest and most progressive manufacturer of geothermal heat pumps. We are committed to innovation and dedicated to environmentally clean, economically sound and superbly comfortable home and business environments. Each ClimateMaster product is produced in our state-of-the-art facility utilizing quality management systems that are ISO 9001:2000 certified. We strive for the highest product quality and service after the sale to give you peace of mind.

An LSB Industries, Inc. company (NYSE: LXU), ClimateMaster has been designing and building equipment that enhances environments we live and work in every day for more than 50 years. In addition to geothermal heat pumps, ClimateMaster offers the most extensive product line of water-source heat pumps for use in a wide variety of applications.

ClimateMaster products are built in the U.S.A.

ClimateMaster works to continually improve its products. As a result, the design and specifications of each product at the time for order may be changed without notice and may not be as described herein. Please contact ClimateMaster’s Customer Service Department at 1-405-745-6000 for specific information on the current design and specifications. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely ClimateMaster’s opinion or recommendation of its products.

The management system governing the manufacture of ClimateMaster’s products is ISO 9001:2000 certified.

ClimateMaster is a company of LSB Industries, New York Stock Exchange Symbol: LXU

WATER-SOURCE HEAT PUMP SYSTEMS

7300 SW 44TH STREET

OKLAHOMA CITY , OK 73179

(800) -299-9747 • FAX (405) -745-6058

CLIMATEMASTER.COM REV. : 1 MARCH, 2010

WATER-SOURCE HEAT PUMP SYSTEMShvacdist.com/PDFs/Climate_Master_Com_Proj_LC007.pdf · water-source...

Documents

Transcript of WATER-SOURCE HEAT PUMP SYSTEMShvacdist.com/PDFs/Climate_Master_Com_Proj_LC007.pdf · water-source...