FIRE SECURITY SYSTEMS

Steel Fire ProtectionFS490

Exc

elle

nce

in F

ire

Tech

nolo

gy

UL/ULC Approved water based thin-film intumescent coating optimised for 120 minutes fire resistance to structural steelwork

DESCRIPTION

FS490 is a water-based intumescent coating for interior structural steel. Unlike ordinary fireproofing, FS490 is applied at minimum thickness and requires no reinforcement. With its incredibly THIN Dry Film Thickness it represents a breakthrough in interior fire protection, design and technology.

FS490 is spray applied and offers up to 120 minutes fire protection under UL263 and ASTM E-119 (UL/ULC Approved).

FS490 is solvent free and virtually odourless. It has been designed to allow fireproofing without compromising aesthetic appeal.

FS490 protects open and closed steel sections against loss of bearing capicity for up to 120 minutes under UL/ULC approval.

WHERE TO USE FS490

FS490 can be applied in residential, commer-cial and industrial applications where archi-tectural designs call for a thin-film, aesthetic, highly decorative finish.

WHY USE FS490?

FS490 gives you fire protection with Aesthetic Appeal.

FS490 has been designed to allow fireproof-ing without compromising aesthetic appeal:- Competitive dry film thicknesses,- Applied as a thin layer that does not com- promise intricate designs and shapes created from the structural steel,- Easy over coating with a wide range of coloured (RAL) finishes,- Complete UL/ULC Approval for 2 hours for internal applications.

Provides intumescent fire protection to structural steelwork while maintaining architectural aesthetics for commercial infra-structure assets including:

- Airports- Stadiums and Leisure Facilities- Office Buildings- Retail Complexes- Cinemas- Residential low and Highrise Apartments- Atriums

Provides intumescent fire protection t

TYPICAL APPLICATIONS

Primer

Hensotherm460/470 KS

Topcoat

STANDARD APPLICATION

THE WINNING ADVANTAGE

- Recognized as the Lowest DFT on the market- Classified for up to 2 hours to UL/ULC/ASTM.- 2 hour DFT starting at 0.912mm (beam).- Water based: solvent and asbestos free.- Lightweight, thin-film application.- Maintains contour of substrate.- Architectural, decorative finish. - Single component (stir and spray).- Cost effective due to low film thicknesses.- LEED Approved

REQUIRED DATA

Product Fire Rating (minutes) FS490 30 - 120

Approvals UL263 - ASTM E-119

Transport / Storage - Transport and store free from frost- preferably at a minimum of +5oC to a maximum of +30oC.- shelf-life of unopened pails: 12 month from date of manu-facture.- Opened pails must be re-sealed.

Packaging - 25 kg net weight (19 litres or 5 Gallons)- Plastic pails- Other sizes on request

Surface Preparation Please refer to the Technical Data Sheet

Application Please refer to the Technical Data Sheet

Drying Time Please refer to the Technical Data Sheet

Top Coats Please refer to the Technical Data Sheet

Safety and the Environment Please refer to the Technical Data Sheet

FIRE SECURITY SYSTEMSNorway :

Skibåsen 20b -4636 Kristiansand NorwayTel:+ 47 95 47 80 00 Fax: +47 38 02 15 31

norway@fire-security.net

Canada:PO Box 21096, Coquitlam BC V3E 3P9 Canada

Tel:+1 604 941 1001 Fax: +1 604 648 9311mail@fire-security.net

www.Fire-Security.net

Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry out sufficient tests in order to ensure that Fire Security products are suitable for the intended purpose and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials.

UAE :PO Box 40068

Ajman - United Arab EmiratesTel: +971 6 7478842 Fax: +971 6 7478843

UAE@fire-security.net