Water Awareness

Always wear a properly fitting and secured PFD when within 10’ of water.

No Bunker gear or fire helmets near water. Use river helmets located in Dive 12 when

on the river banks. In cool temperatures wear Mustang suits

located on Dive 12. Bring Throw bags with you. Work in teams of 2 or more.

Water Safety for RFES

Any call involving water if Dive 12 hasn’t already been dispatched add them.

During any type of rescue call for a Zone 3 Response and indicate what type of response you need.

Zone 3 Dive Response. Zone 3 Swift Water Response. Zone 3 Surface Water Response.During a Zone 3 Response most

jurisdictions in the zone will send trained personnel.

Responding To A Water Incident

Static Water

Call for additional resources. Locate witnesses and separate them, this will

prevent them from working together to create a Last Seen Point.

Determine a Last Seen Point - Triangulate. Establish access points for entry and operations

for Dive technicians. Keep in mind Rescue Mode is 90 minutes of

submersion in cold water. Have crews ready to assist Divers and haul

gear.

First Arriving Unit Responsibilities To A Lake or Pond (Static Water).

A Good Last Seen Point Is Crucial In A Successful Operation.

Swift Water

Call for additional resources. Determine if this is a surface or Dive

Rescue. If you can’t see or hear the victim it may be undetermined.

Send units Down stream of the incident. Locate witnesses and separate them. Determine a Last Seen Point – Triangulate. Establish access points for River Technicians. Establish upstream lookouts. Establish Down stream containment with

throw bags.

First Arriving Unit Responsibilities To A River Or Stream.

Have the witness stand where they were standing when they saw the victim go down.

Have them use a reference point (a fixed object) to indicated where the victim went down.

Ask for their Driver’s License to keep them at the scene.

Kids make great witnesses, don’t discredit them because of their age.

Witness Interviews

Learning The Equipment

The Keys Are Stored In The Dash

Spare Cylinders Are In The Left Front Of The Box.

The Safety TankThis is an essential item

for all dive calls.

It is located in the Left Front compartment with the spare cylinders.

Weight BeltsThese are essential on

every dive call.

Each diver will need a weight belt.

Find out what weight each diver wears.

When in doubt bring several in each weight.

The sizes are 20 25 30 and 35 lbs.

Buoyancy Compensation Device

Also known as BC or System.

A red triangle at the top indicates an XL.

A Yellow Triangle Indicates a Large BC

A Blue Triangle Indicates a Medium BC

Dive Fins

These are essential for every dive call.

The size is indicated on the top of each fin.

Each diver will need a pair of fins.

Comm. LinesThese are essential

for every dive call.

We need to have 2 Comm. lines for every dive.

The Comm. lines are different colors for the safety and rescue diver.

These are located in the rear of the rig.

The Rig Scene Case

This is essential for every dive.

The Rig Scene Case is located in the Rear of the rig.

Hardwire Comm. Kit

This is essential for every dive call.

It is located in the back of the rig.

Throw Bags and Cinch Collar

These are throwing devices that anyone can use to rescue a victim.

These are located in the rear of the rig.

Awareness level itemsSpare PFD’sMustang suitsRiver helmets

Items you may be asked to retrieve.River finsSpare BC’sRecovery

systemsTIC

Water and Line Floats

Gear CartsThese carts are used to

haul dive gear.

Use caution when assembling and disassembling these carts, there are places that can be a pinch hazard.

MachetteThis is often used during river calls.

River Raft Tie Downs

There are three tie down locations for the raft.

This is the center tie down.

Loosen the strap, release the carabiner and pull the strap from the opposite side.

The Rear Strap

Loosen the strap and release the carabiner.

The Front StrapThis is a fixed

strap.

Slide the raft to the rear just enough to release the carabiner.

The raft is ready to be removed from the rack.

Do not remove the raft alone.

Deploying Throw Bags

Open the bag completely. Hold the rope in your non throwing hand. The red Kong is not a handle, it’s a second

chance throw device. For hand placement on the rope place the

rope over the top of your hand with the Kong on the inside of the hand hanging a few inches below. The rope continues around through the palm of the hand. Grasp both the line running through the palm and the part connected to the Kong. This will be easy to release if necessary.

With the Rope in hand toss the bag underhand to your target.

The finishing position should be your hand pointing at your target when releasing the bag.

Aim directly over the target. In swift water error upstream of the victim. Water on the surface travels faster then

water below the surface and the rope will flow to the victim.

When the victim grasps the rope, walk down stream while pulling them in to lessen drag.

Always have multiple throw bags incase of missed throws.

If you run out of throw bags recoil the rope and re-deploy.

The Kong allows the rope to deploy easily on a second chance throw.

Kong