WastePac 60HD Baler - Waste Initiatives
2
1800 44 11 00 | www.wasteinitiatives.com.au WastePac 60HD Baler Specifications Baler Dimensions Height 2 136 mm Width 1 286 mm Depth 1 405 mm Weight 585 kg Power Supply 240V 1 Phase Motor 2.2kW 15A Pressing Force Up to 13T Noise Level 72 dB Cycle Time 24 Seconds Bale Dimensions Height 650 mm Width 589 mm Depth 400 mm Weight Up to 50kg Loading Aperture Sizes Depth 400 mm Width 589 mm Baler Features • Open top loading • Can bale a variety of waste products including plastic bottles, cans & heavy-duty materials • Retaining claws to reduce spring back • Fully automated bale ejector to simplify removal of bale • 2 year warranty Optional Extras • Galvanised finish 2 YEAR W A R R A N T Y
Transcript of WastePac 60HD Baler - Waste Initiatives
1800 44 11 00 | www.wasteinitiatives.com.au
WastePac 60HD BalerSpecifications
Baler DimensionsHeight 2 136 mm
Width 1 286 mm
Depth 1 405 mm
Weight 585 kg
Power Supply 240V 1 Phase
Motor 2.2kW 15A
Pressing Force Up to 13T
Noise Level 72 dB
Cycle Time 24 Seconds
Bale DimensionsHeight 650 mm
Width 589 mm
Depth 400 mm
Weight Up to 50kg
Loading Aperture SizesDepth 400 mm
Width 589 mm
Baler Features• Open top loading
• Can bale a variety of waste products including plastic bottles, cans & heavy-duty materials
• Retaining claws to reduce spring back
• Fully automated bale ejector to simplify removal of bale
• 2 year warranty
Optional Extras• Galvanised finish
2 YEAR
W
ARRANT Y
2 YEAR
W
ARRANT Y
2 YEAR
W
ARRANT Y
Dimensions and technical information without obligation. Subject to change.
1800 44 11 00 | www.wasteinitiatives.com.au
Pressing ForceUp to 13 Ton
Bale WeightUp to 50 Kg
Motor2.2kW 15A
Waste TypesCardboard, Plastic Film, Paper, E-Waste, Cans, LDPE Film …
WastePac 60HD BalerSchematics
HD60.000.0000.MR2
DO NOT SCALE
LISNAKEENEY,MAGHERACLOONECARRICKMACROSS, Co. MONAGHAN,IRELANDTel: +353 (0)42 9667193Fax: +353 (0)42 9667846Email: [email protected]
Sheetmetal Thickness:Part/Assembly No: Material:
Product(s): Customer:
Additional Details:Surface Finish:
Clean and free from sharp edges & burrs
Title:
HD60 Baler
Mass (Approximate)
Sheet No:1 of 2
Printed: 09/08/2012 @ 12:02pm
Created: 12/11/2020
COPYRIGHT THIS DRAWING IS COPYRIGHT &IS THE PROPERTY OF MAC FABSYSTEMS LTD. & MAY NOT BE COPIED, COMMUNICATED TO, OR HANDED OVER TO ANY THIRDPARTY, NOR USED FOR MFG.PURPOSES WITHOUT WRITTEN CONSENT.
Tolerance TableAll dimensions in mm
DIMITEM
Centre Distance
General Dimensions
Bend & Assy. Dimensions
N/A<30 <120 <1000<315 <2000
0.2 0.5 0.3 0.2 0.2
0.7 0.5 0.25 0.25 0.2
0.3 0.2 1.2 0.8 0.5
WHERE USED: HD60 PRGRAM NO. (IF APPLICABLE):
2136
1642
493
1919
619
1286
902
1258
900 11
01
1135
1241
589
1405
598
776 90
7
HD60.000.0000.MR2
DO NOT SCALE
LISNAKEENEY,MAGHERACLOONECARRICKMACROSS, Co. MONAGHAN,IRELANDTel: +353 (0)42 9667193Fax: +353 (0)42 9667846Email: [email protected]
Sheetmetal Thickness:Part/Assembly No: Material:
Product(s): Customer:
Additional Details:Surface Finish:
Clean and free from sharp edges & burrs
Title:
HD60 Baler
Mass (Approximate)
Sheet No:1 of 2
Printed: 09/08/2012 @ 12:02pm
Created: 12/11/2020
COPYRIGHT THIS DRAWING IS COPYRIGHT &IS THE PROPERTY OF MAC FABSYSTEMS LTD. & MAY NOT BE COPIED, COMMUNICATED TO, OR HANDED OVER TO ANY THIRDPARTY, NOR USED FOR MFG.PURPOSES WITHOUT WRITTEN CONSENT.
Tolerance TableAll dimensions in mm
DIMITEM
Centre Distance
General Dimensions
Bend & Assy. Dimensions
N/A<30 <120 <1000<315 <2000
0.2 0.5 0.3 0.2 0.2
0.7 0.5 0.25 0.25 0.2
0.3 0.2 1.2 0.8 0.5
WHERE USED: HD60 PRGRAM NO. (IF APPLICABLE):
2136
1642
493
1919
619
1286
902
1258
900 11
01
1135
1241
589
1405
598
776 90
7
Size Comparison
