Warship 2010The Application of Integrated Computing Technology to the Design, Construction and Lifecycle Support of Warships

The Royal Institution of Naval Architects10 June, 2010

Above the surface:– The most productive ship design and

building system built upon the proven capabilities of AVEVA PDMS and Tribon

– Implemented world-wide– Technology providing new business

opportunities

Below the surface: – Powerful, proven Dabacon database– Parametric modelling– Open customisation – Not reliant on third-party software

AVEVA Marine

AVEVA – The industries we serve

Oil & Gas

Chemical Pharma

Pulp & Paper Marine

Power

• Relevant software development shared between industries

AVEVA – Space Management• Early creation of a Common Reference Model used for

downstream design tasks – flexible; use 3D and/or schematic• Spaces and zones within larger spaces and across spaces• Knowledge-based e.g. automatic insulation added

Design-analysis integration• Own and third-party hull form generation and hydrostatic

analysis• Interfaces to Classification Societies, FEA (ANSYS) and CFD

• Single point of entry into ship’s database: for early I/D, estimating, ordering and for use in downstream processes

• Import diagrams, e.g. from suppliers, ISO15926

Product Model DB

Schematic Data

3D Design Data

Diagrams and Schematic Model Viewer

Supplier equipment• Equipment downloaded directly from supplier site using AP 203• Automated geometry simplification

Courtesy of Wärtsilä

Integrator• Rule-based 3D arrangement created from 2D diagram, e.g.

automatic pipe routing; flow balance, clash free, etc.• Checking 2D against 3D and highlighting any differences

AVEVA Marine – Error free designing• Clash detection and management

• Association

• Alignment of pipes

• Hole management

AVEVA Marine – Error free building• Assembly Planning – Build Strategy

• Weld Planning & Robot Control

• Shrinkage; spring-back etc.

• Accurate BoM

• and many more . . . .

Automated generation of drawings• Automated drawings via customized templates• Stage fabrication drawings and manufacturing drawing

REINERTSENENGINEERING

Tronhiem

REINERTSENENGINEERING

Murmansk

AKERKVAERNER

Oslo

VETCOAIBEL

Billingsked

STATOIL

De-Militarized ZoneDMZ

HUBBehind firewall

Example of one project:– 1 hub with 4 satellite sites– 450 concurrent users

Statoil has in total:– 30 hubs– 40 satellites in their DMZ– 117 sub-contractors– Approx. 1,000 users / day

Global multi-site, concurrent working

Capturing the current as-built condition for Re-fits, Conversions, Through-Life Support and Life Extension

Laser scanning technology

Integration of laser data and AVEVA Marine Re-designing in point cloud with clash detection and

checking design within bubble views Generating drawings and production data and reverse

engineering

Managed access to information between everyone inside and outside the shipyard

Automatic linking of Tags across all data sources Red lining mark-up; commenting, automatic hot-spots

Vendor Neutral - Access all project information from ANY other systems

Drawings, diagrams and sketches Material lists Reports, manuals, certificates etc. Planning information Maintenance and operating data Safety Training, much, much more ...

AVEVA NET

Integrate with ERP systems, e.g.

Arrangement Drawings CalculationsElectrical Data

P&ID’s

Vendor Data

Class data

Linking and accessing of data and documents

Data capture and validation

Gat

eway

AVEVA NET

Installation Status Report

AVEVA MARS

Integration – A Closed-loop system