Warm-Up

16
WARM-UP 1. How fast do x-rays travel through space? 2. What do ultraviolet and gamma rays have in common? 3. A radio wave has a wavelength of 13 m. What is its frequency? 4. A red laser has a wavelength of 650 nm. Does it have a higher frequency or lower frequency than a green laser of 550 nm?

description

How fast do x-rays travel through space? What do ultraviolet and gamma rays have in common? A radio wave has a wavelength of 13 m . What is its frequency? A red laser has a wavelength of 650 nm. Does it have a higher frequency or lower frequency than a green laser of 550 nm?. Warm-Up. - PowerPoint PPT Presentation

Transcript of Warm-Up

Page 1: Warm-Up

WARM-UP1. How fast do x-rays travel through space?2. What do ultraviolet and gamma rays have

in common?3. A radio wave has a wavelength of 13 m.

What is its frequency?4. A red laser has a wavelength of 650 nm.

Does it have a higher frequency or lower frequency than a green laser of 550 nm?

Page 2: Warm-Up

LIGHT (AND THE ELECTROMAGNETIC SPECTRUM)

Page 3: Warm-Up

SPEED OF LIGHT IN MATERIALS In a vacuum, the speed of light is a

constant 3 x 108 m/s

Atmosphere: very close to c Water: 0.75c Glass: 0.67c Diamond: 0.40c When light emerges from these materials

into the air, it travels at its original speed, c

Page 4: Warm-Up

WHY ARE SOME THINGS SEE-THROUGH?

Light is energy carried in an electromagnetic wave that is generated by vibrating electric charges.

Visualize the electrons in an atom as connected by imaginary springs.

When light hits the electrons, they vibrate.

Page 5: Warm-Up

TRANSPARENCY If frequency of light hitting a material ≠ natural

frequency of the material, the electrons forced into vibration with small amplitudes.

The atom holds the energy for less time, and they have less chance of collision with neighboring atoms.

Therefore, less energy is transferred as heat. Energy of the vibrating electrons is reemitted as

transmitted light. Materials that transmit light are

transparent.

Page 6: Warm-Up

OPACITY If frequency of light hitting a material = natural

frequency of the material, the electrons are forced into vibration with large amplitudes.

The atom holds the energy for more time, so there is more chance of collision with neighboring atoms.

Therefore, more energy is transferred as heat. Materials that absorb light without

reemission and thus allow no light through them are opaque.

Page 7: Warm-Up

GLASS: AN EXAMPLE Glass is _______________ to visible light. However, electrons in glass have a natural

vibration frequency in the ultraviolet range. UV light shines on glass

resonance occurs e- forced into vibration with higher amplitudes atoms hold energy for more time collide with neighboring atoms energy LOST to heat

UV light does not pass through glass Glass is ____________ to UV light.

Page 8: Warm-Up
Page 9: Warm-Up

GLASS: EXAMPLE CONTINUED When the EM wave has a lower frequency

than UV, as visible light does, e- are forced into vibration with smaller amplitudes atom holds the energy for less time less chance of collision with neighboring atoms less energy is transferred as heat

Energy of the vibrating electrons is reemitted as transmitted light.

Page 10: Warm-Up

SHADOWS A thin beam of light is called a ray When light shines on an object, some of the rays

may be stopped while others pass on in a straight line path

A shadow is formed where light rays cannot reach

Fuzzy part around the edges of the shadow happens when: Light from one source is blocked but where other light

fills in or Where light from a source is only partially blocked

Page 11: Warm-Up

POLARIZATION

When light from a lamp or the sun shines on a polarizing filter, the light that is transmitted is polarized

Light will pass through a pair of polarizing filters when their polarization axes are aligned, but not when they are crossed at right angles.

Page 12: Warm-Up
Page 13: Warm-Up

Hold an upright finger at arm’s length and see how it switches position relative to the background as you alternately close each eye.

3D

Vision in three dimensions depends on the fact that both eyes give impressions simultaneously, each eye viewing a scene from a slightly different angle.

The view seen by each eye is different. The combination of views in the eye-brain system gives depth. A pair of photographs or movie frames, taken a short distance

apart (about average eye spacing), can be seen in 3-D when the left eye sees only the left view and the right eye sees only the right view.

Page 14: Warm-Up
Page 15: Warm-Up

3D MOVIES! Movies project the pair of views through

polarization filters onto a screen. Their polarization axes are at right angles to

each other, so the right eye sees only the right view and the left eye sees only the left view.

Overlapping pictures look blurry to the naked eye To see in 3-D, the viewer wears polarizing

eyeglasses with the lens axes also at right angles Each eye sees a separate picture, just as in real

life. The brain interprets the two pictures as a single picture with a feeling of depth

Page 16: Warm-Up