WAP- Wireless Application Protocol

by Team 11 Presenters:

Suma Pramod Connie Barbosa

Niti Pandey Patrick Cunning

Olga Pavlenko

04/11/2002

Overview

WAP Introduction

WAP architecture requirements

Architecture overview

World-wide web model

WAP model

Components of WAP architecture

Sample Configuration of WAP technology

Usage, Advantages & Disadvantages of WAP

Summary

WAP- Wireless Application Protocol

• An open, global specification that empowers mobile users with wireless devices to easily access and interact with internet information and services instantly.

• The wireless industry came up with the idea of WAP. The point of this standard was to show internet contents on wireless clients, like mobile phones.

• WAP stands for Wireless Application Protocol o WAP is an application communication protocol o WAP is used to access services and information o WAP is inherited from Internet standards o WAP is for handheld devices such as mobile

phones o WAP is a protocol designed for micro browsers o WAP enables the creating of web applications

for mobile devices. o WAP uses the mark-up language WML (not

HTML) WML is defined as an XML 1.0 application

The WAP specifications continue to be developed by contributing members, who, through interoperability testing, have brought WAP into the limelight of the mobile data marketplace with fully functional WAP–enabled devices as shown below: 

The basic AIM of WAP is to provide a web-like experience on small portable devices - like mobile phones and PDAs.

Purpose of WAP To enable easy, fast delivery of relevant information and services to mobile users. Type of devices that use WAP Handheld digital wireless devices such as mobile phones, pagers, two-way radios, smart phones and communicators -- from low-end to high-end. WAP works with most Wireless networks  such as:CDPD, CDMA, GSM, PDC, PHS, TDMA, FLEX, ReFLEX, iDEN, TETRA, DECT, DataTAC, Mobitex.

Operating systems that are compatible with WAP

•WAP is a communications protocol and an application environment.

•WAP is independent of OS that means WAP can be implemented on any OS.

•It can be built on any operating system including Palm OS, EPOC 32, Windows CE, FLEXOS, OS/9, Java OS, etc. It provides service interoperability even between different device families.

WAP Architecture Requirements

• Leverage existing standards whenever possible

• Define a layered, scaleable and extensible architecture

• Support as many wireless networks as possible

• Optimize for narrow-band bearers with high latency

WAP Architecture Requirements (Contd.)

• Optimize for efficient use of device resources

• Provide support for secure applications and communication

Architecture Overview

• WWW programming model is optimized and extended to match characteristics of the wireless environment

• Utilizes proxy technology to connect between the wireless domain and WWW

World-Wide Web Model

CGI, Scripts,

Etc.

Content

Web Server

Client

WebBrowser

Request(URL)

Response(Content)

WAP Programming Model

CGI, Scripts,

Etc.

Content

Web Server

Client

WAEUser

Agent

Request(URL)

Response(Content)

Gateway

EncodersAnd

Decoders

EncodedRequest

EncodedResponse

• WAP Device - Is used to access WAP applications and

content. It might be a PDA, handheld computer.

• WAP Client - Entity that receives content from Internet via a

WAP Gateway. This is usually the WAP Browser.

• WAP Content/Origin/Application Server - Element in the network where the information

or web/WAP applications resides.

• WAP Proxy

- Acts both as a client and as a server in the network.Typically has– Protocol gateway : translates requests from the

WAP protocol stack to WWW protocol stack– Content encoders and decoders : translate WAP

content into compact encoded formats to reduce the size of data over the network

It allows content and applications to be hosted on standard WWW servers and developed using proven WWW technologies such as CGI scripting

• WAP Gateway - Intermediary element used to connect two different

types of network. It receives request directly from the clients as if it actually were the origin server that clients want to receive the information form. The clients are usually unaware that they are speaking to the Gateway.

• WAP Browser– Software running on the WAP device that

interprets the WAP content arriving from the internet and decides how to display it on WAP device.

WML • WML – Wireless Markup Language formerly

called HDML (Handheld Devices Markup Language)

• Is a tag language that allows the text portions of Web Pages to be presented on cellular phones and Personal Digital Assistants (PDAs) via wireless access.

• WML is used for delivering data to WAP devices, and is HTML- like in its appearance.

• An alternative to WML is I-Mode’s cHTML language.

WAP Network Example Web

Server

WirelessNetwork

WAPProxy

HTMLFilter

WTAServer

WAPClient

WML

WMLHTML

WWW Protocol Stack

TCP/IPUDP/IP

TLS - SSL

HTTP

HTMLJava Script

Components of WAP Architecture

Other ServicesAnd Applications

Transport Layer (WDP)

Security Layer (WTLS)

Transaction Layer (WTP)

Session Layer (WSP)

Application Layer (WAE)

GSM CDMA PHS IS-136 CDPD PDC-P FLEX Etc…

Bearers :

Wireless Application Environment (WAE)

• General-purpose application environment based on a combination of WWW and mobile telephony technologies.

• It defines the user interface on the phone. It contains WML and WTA (Wireless Telephony Application).

• Primary objective – interoperable environment.

Wireless Application Environment(Contd.)

• WAE includes a micro-browser (Client software designed to overcome challenges of mobile handheld devices that enables wireless access to services such as Internet information in combination with a suitable network) server environment which provides– WML– WML script– WTA– Content formats

Wireless Session Protocol (WSP)• The WAP session protocol (WSP) layer provides a

lightweight session layer to allow efficient exchange of data between applications.

• Application layer with a consistent interface for two session services– Connection-oriented service that operates above

the transaction layer protocol (WTP)– Connectionless service that operates above a

secure or non-secure datagram service (WDP)

• Optimized for low-bandwidth bearer networks with long latency

Wireless Transaction Protocol (WTP)

» Runs on top of a datagram service

• The WAP transaction protocol (WTP) layer provides transaction support, adding reliability to the datagram service provided by WDP.

• Light weight transaction-oriented protocol • Three classes of transaction services

– Unreliable one-way requests– Reliable one-way requests– Reliable two-way request-reply transactions

Wireless Transport Layer Security (WTLS)

Based on industry-standard Transport Layer Security (TLS) protocol

• Optimized for use over narrow-band communication channels

• Features:– Data integrity– Privacy– Authentication– Denial-of-service protection

Wireless Datagram Protocol (WDP)

• The WAP datagram protocol (WDP) is the Transport layer that sends and receives messages via any available bearer network, including SMS, USSD, CSD, CDPD, IS–136 packet data, and GPRS.

• Operates above the data capable bearer services supported by various network types.

• Provides a common interface to the upper layer protocols and hence they function independent of the underlying wireless network.

Bearers

• Differing levels of quality of service with respect to throughput, error rate, and delays

• WAP protocols are designed to compensate for or tolerate these varying levels of service

• WDP specification lists the bearers that are supported and techniques used to allow WAP protocols to run over each bearer

Sample WAP Stacks

No layer

IP Non-IP

UDP WDP

WTP

WSP/B

WAE

WTLS

WAEUser Agents

No layer

IP Non-IP

UDP WDP

WTP

WTLS

Applications over transactions

No layer

IP Non-IP

UDP WDP

WTLS

Applications over Datagram Transport

WAP Technology

Outside of WAP

                                                                                                   

             

Mobile-Originated Example of WAP Architecture

The request from the mobile device is sent as a URL through the operator's network to the WAP gateway, which is the interface between the operator's network and the Internet as shown in the figure below.

FUTURE OF WAP

Will WAP comply with Third Generation wireless standards?

Yes, WAP has been designed to be as independent as possible from the underlying network technology.

Is WAP necessary with higher bandwidth 3G networks?

Even as bandwidths increase, the cost of that bandwidth does not fall to zero. These costs result from higher power usage in the terminals, higher costs in the radio sections, greater use of RF spectrum, and increased network loading. In addition, the original constraints WAP was designed for -- intermittent coverage, small screens, low power consumption, wide scalability over bearers and devices, and one-handed operation -- are still valid in 3G networks. Finally, we can expect the bandwidth required by application users to steadily increase. Therefore, there is still a need to optimize the device and network resources for wireless environments. We can expect WAP to optimize support for multimedia applications that continue to be relevant.

If WAP is very successful in mass-markets on 2.5G networks, 3G networks may be needed purely for capacity relief.

The reasons to migrate to WAP technology

Network operators are behind WAP

With minimal risk and investment, WAP enables operators to decrease churn, cut costs, and increase revenues by improving existing, value-added services and offering exciting new informational services.

Why are equipment manufacturers interested in WAP?

Being a global open specification suite, WAP has generated the critical mass for manufacturers. This has opened up new product and marketing opportunities in the wireless industry and provides new revenue to participating companies.

WAP in the Competitive EnvironmentCompetition for WAP protocols could come from a number of sources: • subscriber identity module (SIM) toolkit—The use of SIMs or smart cards in wireless devices is already widespread and used in some of the service sectors.• Windows CE—This is a multitasking, multithreaded operating system from Microsoft designed for including or embedding mobile and other space-constrained devices. • JavaPhone™—Sun Microsystems is developing PersonalJava™ and a JavaPhone™ API, which is embedded in a Java™ virtual machine on the handset. NEPs will be able to build cellular phones that can download extra features and functions over the Internet; thus, customers will no longer be required to buy a new phone to take advantage of improved features.

USAGE- Corporate Applications: Sales force automation where sales people use their WAP enabled handsets to get instant, direct access to the latest pricing, latest news, competitive information any time, anywhere.

- Online Services:

Banking: Users can get their current balance, transfer funds between accounts and receive fax of a mini-statement.

Electronic Commerce: Subscribers can use their handset just like their PC to purchase products and services over the Web.

- Tele servicesPrepaid Services: With a WAP-enabled phone,

prepaid subscribers can see their current balance with the press of a button. By pressing another button, they can also recharge their account by entering a credit card or voucher number into the handset.

- Personal ProductivityEmail: Using WAP users can keep track of their email

right from their handset.- Others include:

- Interactive Chat- Auctions- Games

The ADVANTAGES that WAP can offer over these other methods are the following:

•open standard, vendor independent

•network-standard independent

•transport mechanism–optimized for wireless data bearers

•application downloaded from the server, enabling fast service creation and introduction, as opposed to embedded software

DISADVANTAGES of WAP

• Small screens: For web phones, there's an incredibly small viewing area; palmtops are barely better.

• Speed of access: All devices have slow access. • Limited or fragmented availability: Wireless web access is

sporadic in many areas and entirely unavailable in other areas.

• Price: Many technology limitations are being addressed by higher-end devices and services. But the entry price for a good wireless web palmtop with decent display, keyboard, and speed is easily $700 to $900, not including monthly access.

• Lack of user habit: It takes some patience and overcoming the learning curve to get the hang of it -- connecting, putting in an address, typing. Users just aren't used to the idea and protocol yet.

•      

Summary

• WAP provides a markup language and a transport protocol that open the possibilities of the wireless environment and give players from all levels of the industry the opportunity to access an untapped market that is still in its infancy. • The bearer-independent nature of WAP has proved to be a long-awaited breath of fresh air for an industry riddled with multiple proprietary standards that have suffocated the advent of a new wave of mobile-Internet communications. WAP is an enabling technology that, through gateway infrastructure deployed in mobile operator's network, will bridge the gap between the mobile world and the Internet, bringing sophisticated solutions to mobile users, independent of the bearer and network. • Backed by 75 percent of the companies behind the world's mobile telephone market and the huge development potential of WAP, the future for WAP looks bright.

References

Books:• Beginning WAP – Wrox Publications • Dynamic WAP Application Development- Manning Publications, Inc

Websites: