WalzCraft 700 Series Mitered Stile & Rail Profiles
description
Transcript of WalzCraft 700 Series Mitered Stile & Rail Profiles
E.10.1V16.2.com
®® 99.7% American MadeC
• Due to the design of the Mitered Profiles (Fully Molded) in the section that follows, it is not an option to modify the width of the profile from what is shown or to modify the existing outside edge profile.
• The guideline shown to the right can be utilized as an aid when ordering Mitered Doors or Drawer Fronts with no additional outside edge option, using WalzCraft Order Forms.
(Note: The MP760-57 profile will be used in our example and shows how the information should be noted on your order form.)
• For the most current Order Forms, please visit our website at www.WalzCraft.com. If you do not have access to our website, please contact our Customer Support Team and order forms can be mailed to you.
• Non-Standard Part Sizes are not available. The top rail, bottom rail, left stile and right stile must all be the same profile and the same width.
• Some profiles in this section may accommodate a Recessed Applied Molding (RAM) rout to add an optional applied molding. For more information on Recessed Applied Moldings, please refer to page E.6.9.
Profile Info Stile & Rail or Miter Profile ______________ Panel Profile ______________ Outside Edge Profile ______________
MP760-57PR301-25
NA
MP700 Series - “Mitered” Mortise & Tenon Joinery Profile Options
MP760-76
MP760-57
MP760-38
MP1812
MP1813
MP1814
#2589
#2589
#819
Standard and True LiteMullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
E
MP1813MP760-51
SW C SW C
SW C SW C
SW C SW C
SW C SW C
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.2V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
EMP701-76
MP701-57
MP701-38
MP1403
MP1404
MP1405
#2296
#2296
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP702-76
MP702-57
MP702-38
MP1417
MP2204
MP2199
#2760
#2760
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
SW C SW C
SW C SW C
SW C SW C
SW C SW C
SW C SW C
SW C SW C
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.3V16.2.com
®® 99.7% American MadeC
MP703-76
MP703-57
MP703-38
MP1406
MP1407
MP1408
#944
#944
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP704-76
MP704-57
MP704-38*
MP1409
MP1409
MP1410*
#2472
#2472
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
* Matching Mullion Stock isnot available with the
MP704-38 and MP1410.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW C SW C
SW C SW C
SW C SW C
SW C
SW C
SW C
SW C
SW C SW C
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.4V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP705-76
MP705-57
MP705-38
MP1411
MP1412
MP1413
#914
#914
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP708-76
MP708-57
MP708-38
MP1423
MP1424
MP1425
#939
#939
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.5V16.2.com
®® 99.7% American MadeC
MP709-76
MP709-57
MP709-38*
MP1426
MP1427
MP1410*
#2472
#2472
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP710-76
MP710-57
MP710-38
MP1428
MP1429
MP1430
#1114
#1114
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
* Matching Mullion Stockis not available with theMP709-38 and MP1410.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW
SW SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.6V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP715-76
MP715-57
MP715-38
MP1442
MP1443
MP1444
#2437
#2437
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP716-76
MP716-57
MP716-38
MP1445
MP1446
MP1447
#949
#949
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.7V16.2.com
®® 99.7% American MadeC
MP717-76
MP717-57
MP717-38
MP1448
MP1449
MP1450
#930
#930
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP718-76
MP718-57
MP718-38
MP1451
MP1452
MP1453
#1873
#1873
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW C SW C
SW C SW C
SW C SW C
SW
SW
SW
SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.8V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP719-76
MP719-57
MP719-38
MP1454
MP1455
MP1456
#948
#948
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP720-76
MP720-57
MP720-38
MP1406
MP1407
MP1408
#944
#944
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW SW
SW SW
SW SW
SW SW
SW SW
SW SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.9V16.2.com
®® 99.7% American MadeC
MP722-76
MP722-57
MP722-38
MP1460
MP1460
MP1461
Center stile & center rail profiles look like this...
Matching
Mullion
Stock is not
available for
any of these
profiles.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW
SW
SW
SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.10V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP723-76
MP723-57
MP723-38
MP1460
MP1460
MP1461
Center stile & center rail profiles look like this...
MP733-76
MP733-57
MP733-38*
MP1409
MP1409
MP1410*
#2472
#2472
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
Matching
Mullion
Stock is not
available for
any of these
profiles.
* Matching Mullion Stock isnot available with the
MP733-38 and MP1410.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.11V16.2.com
®® 99.7% American MadeC
MP734-76
MP734-57
MP734-38
MP1486
MP1487
MP1488
#1179
#1179
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP735-76
MP735-57
MP735-38
MP1489
MP1490
MP2203
#1164
#1164
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
* When ordering LP105, LP111, LP112, LP114, LP125, LP130 & LP132 Lite Patterns; #2557 Mullion Stock molding must be used.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.12V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP738-76
MP738-57
MP738-38
MP1406
MP1407
MP1408
#944
#944
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP740-76
MP740-57
MP740-38
MP1501
MP1502
MP1503
#1644
#1644
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW
SW SW
SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.13V16.2.com
®® 99.7% American MadeC
MP742-76
MP742-57
MP742-38
MP1486
MP1487
MP1488
#2611
#2611
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP744-76
MP744-57
MP744-38
MP1509
MP2205
MP2205
#2552
#2552
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...Corner block molding is recommended with beaded and rope moldings wherethey meet at the corners to prevent mis-match that may occur. See page E.7.1.
Molding is NOT included with this profile family and must be ordered separately.
#1008
#1008
#1008
#1008 #1008
#1008
#1008
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW C
SW C
SW C
SW C
SW C SW C
SW C
SW C
SW C
SW C
SW C
SW C
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.14V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP751-76
MP751-57
MP751-38
MP1667
MP1668
MP1669
Center stile & center rail profiles look like this...
MP754-76
MP754-57
MP754-38
MP1428
MP1429
MP1430
#1114
#1114
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
Matching
Mullion
Stock is not
available for
any of these
profiles.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.15V16.2.com
®® 99.7% American MadeC
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Applied Molding Shelf, molding is optional. X
MP759-76
MP759-57
MP759-38
MP1795
MP1796
MP2206
#1776
#1776
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP761-76
MP761-57
MP761-38
MP1812
MP1813
MP1814
#2589
#2589
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
EX
X
X
SW C SW C
SW C SW C
SW C SW C
SW
SW
SW
SW
SW SW
E.10.16V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP762-76
MP762-57
MP762-38
MP1812
MP1813
MP1814
#2589
#2589
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP763-76
MP763-57
MP763-38
MP1812
MP1823
MP1823
#2589
#2589
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...Corner block molding is recommended with beaded and rope moldings wherethey meet at the corners to prevent mis-match that may occur. See page E.7.1.
Molding is NOT included with this profile family and must be ordered separately.
#1107
#1107
#1107
#1107 #1107
#1107
#1107
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.17V16.2.com
®® 99.7% American MadeC
MP764-76
MP764-57
MP764-38
MP1838
MP1839
MP1840
#1841
#1841
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP765-76
MP765-57
MP765-38
MP1867
MP1868
MP1869
#1866
#1866
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW
SW
SW
SW
SW SW
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.18V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
Due to the construction of this Mitered Profile Family, there are no
options for a center stile or center rail when ordering the MP767-38.
MP766-76
MP766-57
MP766-38
MP1877
MP1877
MP1878
#1879
#1879
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP767-76
MP767-57
MP767-38
MP2195
MP2196
#1911
#1911
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW SW
SW SW
SW SW
SW SW
SW SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.19V16.2.com
®® 99.7% American MadeC
MP769-76
MP769-57
MP769-38
MP2096
MP2097
MP2098
#2099
#2099
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP770-76
MP770-57
MP770-38
MP2104
MP2106
MP2107
#1644
#1644
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW
SW
SW
SW
SW SW
SW
SW
SW
SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.20V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP771-76
MP771-57
MP771-38
MP2104
MP2106
MP2107
#1644
#1644
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP772-76
MP772-57
MP772-38
MP2216
MP2217
MP2218
#2219
#2219
#1171
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
6.9mm
SW SW
SW SW
SW SW
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.21V16.2.com
®® 99.7% American MadeC
MP773-76
MP773-57
MP773-38
MP1838
MP1839
MP1840
#1841
#1841
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP774-76
MP774-57
MP774-38
MP2320
MP2321
MP2322
#2324
#2324
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW SW
SW SW
SW SW
SW SW
SW
SW
SW
SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.22V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP775-76
MP775-57
MP775-38
MP2385
MP2385
MP2386
#2384
#2384
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP776-76
MP776-57
MP776-38
MP2519
MP2520
MP2521
#2514
#2514
#819
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
SW C SW C
SW C SW C
SW C SW C
SW SW
SWSW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.23V16.2.com
®® 99.7% American MadeC
Standard and TrueLite Mullion Stock
Center stile & center rail profiles look like this...
MP777-76
MP777-57
MP777-38
MP2553
MP2554
MP2555
#814
#814
#819
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.24V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
Center stile & center rail profiles look like this...
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
Standard and TrueLite Mullion Stock
MP779-57
MP779-38
#2325
#2325
#1172
MP779-76 MP2326
MP2326
MP2327
MP779-114 MP779-114uses MP2326
Must be ordered at 1" thick. Add 30% for 1" thickness.
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
SW
SW SW
SW SW
SWSW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.25V16.2.com
®® 99.7% American MadeC► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Profile Options MP700 Series - “Mitered” Mortise & Tenon Joinery
E
Center stile & center rail profiles look like this...
Standard and TrueLiteMullion Stock
MP780-57
MP780-38
#1807
#1807
#819
MP780-76 MP2674
MP2675
MP2676
Standard and TrueLiteMullion Stock
MP781-57
MP781-38
#814
#814
#819
MP781-76 MP2681
MP2682
MP2683
Center stile & center rail profiles look like this...
SW
SW
SW
SW
SW SW
SW SW
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
E.10.26V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
MP782-57
MP782-38
MP782-76 MP2872
MP2873
MP2873
Center stile & center rail profiles look like this...
Matching
Mullion
Stock is not
available for
any of these
profiles.
SW SW
SW SW
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
SW SW
E.10.27V16.2.com
®® 99.7% American MadeC
Profiles OptionsMP700 Series - “Mitered” Mortise & Tenon Joinery
E
Center stile & center rail profiles look like this...
Mitered Door and Frame Construction with Matching Mullion Stock • These Mitered Profiles are fully molded with NO width flexibility, other than what is shown. • = Available in solid wood. • = Available for Convex/Concave products (Chapter D). CSW
MP783-64
MP783-57
MP783-76 MP3049
MP3049
MP3050
SW SW
SW SW
SW SW
MP783-38
SW
MP3051
SW
Standard and TrueLiteMullion Stock
#2798
#2798
#819
E.10.28V16.2
(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C
MP700 Series - “Mitered” Mortise & Tenon JoineryProfile Options
E
► For PRICING ► See Section E.10 in our Wholesale Pricing Catalog.
Ordering & Pricing Notes: MP700 Series Miter Door & Drawer Front Profiles Ordering Guidelines
1 Order Forms Applicable order forms will include spaces to indicate your chosen profiles.Pricing
1 Pricing Please see Section E.10 of the Wholesale Pricing Catalog.
Technical Notes: MP700 Series Miter Door & Drawer Front Profiles Cabinet Door & Drawer Front Options (Chapter B)
1 Mitered Frame or Mullion Doors
All of the mitered profiles shown in this catalog are also available with the GRF profile. When ordering, please indicate whether the door is a frame or mullion. If a mullion, please indicate the number of lites. Not all mitered profiles are available with mullions.
2 Complex LitePatterns
The following mullion lite patterns are considered complex and require an alternative mullion molding be used with certain stile & rail profiles: LP105, LP111, LP112, LP114, LP125, LP130, LP132, LP142, LP151 (see Section B.12).The following stile & rail profiles would require use of the alternative mullion molding when paired with the afore mentioned complex lite patterns: MP735.• MP735 / #1164 uses #2557.
Design Options (Chapter G)
1 “Mitered” Stile and Rail Stock (Part #SRP100)
“Mitered” Stile & Rail stock is produced and priced the same as “Traditional” Stile & Rail stock with an outside edge. Available in 8' [2438.4mm], Random Length and Cut to Length sizes. See Section G.15 for additional information and pricing guidelines. To order please use E•Z Order Form #5 - Moldings & Miscellaneous and Part #SRP100.
Functional Options (Chapter F)
1 1½" [38.1mm] Wide Miter Profiles Hinge boring is not available for any of the 1½" [38.1mm] wide miter profiles.
Miscellaneous
1 Center Stile and RailConstruction
All center stiles & rails will be haunched into the outside stiles & rails creating a mitered joint where they are conjoined, except MP1460 & MP1461. A butt joint is used to install these center stiles & rails.
Sizes / Dimensions1 Profile Drawings All Stile & Rail and Mullion Stock drawings are to scale.2 Thickness Available in ¾" [19.1mm] and 1" [25.4mm] thickness, unless otherwise noted.
3 Minimum SizesAll mitered door and drawer front minimum sizes are calculated based on 2¼" [57.2mm] wide profiles. • If using a 3" [76.2mm] wide profile, please add 1½" [38.1mm] to the published minimum door size. • If using a 1½" [38.1mm] wide profile, deduct 1½" [38.1mm] from the published minimum size.
Profile Options (Chapter E)1 MP744, MP763 Families Designed to accept Applied Molding #1008, #1107. Applied molding must be ordered separately.
2 MP772 FamilyFor use with these Solid Wood Panel Profiles: PR318-25, PR319-10, PR320-25, PR320-32, PR320-44, PR321-32, RVSCP-PR324, PR328-32, PR329-19 or a ¼" [6.4mm] veneer flat panel, to be recessed below the face of stiles and rails. Not compatible with any other Solid Wood Panel Profiles.
Material Options1 Material Options = Profile is available on products made from solid wood.SW