Walk Through Energy Generation

24
WALK THROUGH ENERGY GENERATION 1

description

walking through energy generation

Transcript of Walk Through Energy Generation

WALK THROUGH ENERGY GENERATION

WALK THROUGH ENERGY GENERATION

11INTRODUCTIONThe use of electricity is increasing day by day and non-renewal energy resources is getting exhausted.

The renewal source like solar energy, wind energy etc has various limitation.

In garden electricity can be generated on a large scale as people go for walk.

2PIEZOELECTRIC SIGNALSFirst demonstration of this signal was done by Pierre Currie and Jacques Currie.

There are two types of signals that can be used for technological application are:

The Direct piezoelectric effect.

The Converse effect.3 BLOCK DIAGRAM4Piezoelectric sensor Up converter ckt(Dc to dc converter)BatteryLoad (LED)MicrocontrollerSensor ckt lcd5Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdIt is first block which converts applied pressure into electrical energy.6Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdBoost the voltage and give to battery charger.7

8Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdElectricity is given to load.9Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdIt gets input from rechargeable batteries and gives it to microcontroller.

10

B211Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdIt is used for programming the lcd to display how much voltage is generated and drive the switching ckt.PIC CONTROLLER 16F877Inbuilt A to D converterLow power consumptionFlash memory 8 KbytesEEPROM memory -256 bytes5 portsPower saving sleep mode.1213

2 34014

15Piezoelectric sensor Up converter ckt(Dc to dc converter)Battery Load (LED)MicrocontrollerSensor ckt lcdIt is used for displaying the voltage. How it works?16

Piezoelectric sensors

Track Hours Voltage generated in this model 0.100.20.300.511.21.302.323.52.304.317 Advantages 18Large amount of electricity can be generated.

Approx. 3 times energy than solar and 2 times than wind energy. 19Parameter Solar energy (large)Wind energy Piezo electric(large scale)Efficiency 94.5990.1196.21Average Electricity generated in one hour (in kwph)3.54.58.2Cost

Higher High ModerateCovering required No

No

Yes DisadvantageLarge piezosensors are required.

It requires covering to protect it from rain which makes it costlier.

20 Uniqueness Generation of electricity by using the piezoelectric transducers.

By walking we can generate electricity which is environmental friendly

By this concept we generate electricity on large scale as people goes for walk.

21 Future scopeSolar energy and wind energy can be included in this project.

It can be used in lifts, elevators, staircase etc22 Conclusion Thus by walking in the garden we can generate electricity .

Save fossil fuel for future generation and save our environment23Thankyou 24