w w w .ifm .co m

ww

w.if

m.c

om

Sensors for Food Automation

ifm efector – close to you!

1

Inductive sensors 16 - 21

Magnetic sensors 22 - 25

Cylinder sensors 26 - 27

Company information 2 - 7

Solutions for food and beverage applications 8 - 13

Food specific approvals and testing 14 - 15

Safety technology 46 - 51

Valve position sensors

28 - 33Photoelectric sensors

34 - 39

Vision sensors 40 - 45

Flow sensors and meters 60 - 61

Pressure sensors and transmitters 52 - 59

Temperature sensors and transmitters 62 - 69

Level sensors 70 - 71

Diagnostic systems 86 - 91

Identification systems 84 - 85

Cordsets and patchcords 92 - 95

Bus system AS-interface 72 - 83

Business policies 96

Sensors and controls for food automation

ifm people. The ifm team of employees is committed to helping you succeed in your business.We directly service and work with over 90,000 customers.

ifm products. For over 40 years, ifm has developed, manufactured, and marketed sensors tothe food and beverage industry. We offer a complete family of process instruments, positionsensors, fluid sensors, diagnostic systems, networking products, and wiring solutions.

Quality. There can be no compromise in the quality and reliability of sensors that are applied in your production facility. The ifm new product development process incorporates specific testsfor the food and beverage industry. The accuracy, drift, and repeatability of our sensors aretested in thermal shock and high pressure cleaning conditions.

Investment in R&D. Developing new products that increase uptime and productivity is a core belief of our company. We apply practical innovation to simplify technology and developproducts that can have a positive impact on your production process.

Application know-how. We have over 40 years of experience in working with the food andbeverage industry. Our knowledgeable team of technical support engineers will work with youto recommend the right solution, the first time.

ifm business philosophy. ifm provides a knowledgeable and courteous service center team to assist with order placement and technical support. We offer an efficient distribution centerfor accurate and on-time delivery of products. ifm publishes list prices in literature and on ourwebsite, and we always stand behind the quality and performance of our products.

Global presence with local focus. With more than 4,300 dedicated ifm employees in over 70 countries, you can count on local support all over the world.

About ifm…

ifm is one of the world’s

largest manufacturers of

industrial sensors and controls

products, producing over

5 million sensors annually.

More than 3,500 ifm

employees serve over 90,000

purchasing customers

worldwide.

ifm has more than 70

subsidiaries located in all

major countries.

Annual global sales exceed

$624 million USD.

Our dedication to innovation,

quality and customer support

has made us a global market

leader.

The ifm commitment

3

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks

Identificationsystems

Machineconditionmonitoring

Wiring technology

Our Vision: To be the premier technology partner for sensors and controls.

Position sensors

• Inductive proximity sensors• Magnetic proximity sensors • Cylinder and valve position sensors• Photoelectric sensors

Vision sensors

• Multi-code readers• efector dualis inspection sensors• 3D level sensors

Safety products

• Inductive safety sensors• Safety relays• Safety light curtains and grids

Wiring solutions

• Controllers and gateways• Power supplies• AS-i networking• Cordsets

Fluid and diagnostic sensors

• Pressure sensors and transmitters• Flow sensors and meters• Temperature sensors and transmitters• Level sensors• Diagnostic systems

Reliable Products… Innovative Design

ifm offers a broad product range that includes sensorsand controls for food and beverage applications.

ifm’s core competency for industrial product design isto develop products with robust housings, easy userinterfaces and flexible output stages.

ifm makes large investments in R&D and employsover 400 development engineers.

Our R&D team has more than 500 registered ifmpatents worldwide.

ifm has received multiple awards for innovation andbreakthrough technologies.

Parameters tested

As an ISO 9001:2008 compliant company, ifm efector performs extensive testing to insurereliable performance. Tests include:

Sensing range characteristics

Electrical parameters

Seal integrity

Leakage current

Display and LED function

Hysteresis

Voltage drop

Insulation using high voltage (2700 AC)

Operating current in the open and closed state

High performance products that increase uptime and productivity

4 www.ifm.com

Rich History… Promising Future

ifm electronic, the parent company ofifm efector, was founded in 1969.

For over 40 years, ifm has manufacturedand marketed electronic sensors andcontrols for food and beverageapplications.

ifm employs over 4,300 dedicatedindividuals who provide outstandingproduct support and technical service.

More than 100,000 customers purchaseifm products worldwide.

ifm is currently one of the world’slargest manufacturers of industrial sensors and controls, producing over 5 million sensors annually.

Global Support... Local Presence

ifm North America, established in 1985,has a network of sales offices located inall major industrial markets throughoutthe US, Canada and Mexico.

The ifm Direct Sales Team provides on-site application assistance and technicalsupport throughout North America.

The ifm Service Center is staffed byapplication engineers and customerservice representatives who provide support from 7:30 am to 7:00 pm ESTto ensure time-zone coverage.

Our dedication to innovation, qualityand customer support has made ifm aglobal leader in sensors and controls.

ifm efector CanadaToronto, Canada

ifm efector USAExton, PA

ifm efector MexicoMonterrey, Mexico

ifm North American Operation

ifm Worldwide Support

Whether you ship your machines internationallyor have manufacturing plants all over the world,ifm has local support in over 70 countries.

You can count on ifm anywhere in the world!

Our people and our products are committed to helping you succeed in your business

ifm efector – close to you!

Company

5www.ifm.com

Logistics

On-time delivery with accuracy of your order is ourgoal in the ifm Distribution Center. There can be nocompromises when it comes to uptime in your facility.

The ifm Distribution Center is located inDowningtown, PA, just outside Philadelphia. Morethan 10,000 orders are shipped per month with anaccuracy rate of 99.9%.

Service Center

You can count on our Service Center team to be areliable partner. That means easy order placement andknowledgeable technical support.

Our Service Center team includes applicationengineers who can assist with technical questions andapplication solutions. ifm customer service representa-tives can assist with order placement, product quotes,and delivery information.

ReliableService Center

Dedicated Sales Engineers

On-Site Sales Support

You can count on our experienced team of ifm sales engineers to understand your applications andchallenges.

Our sales engineers work with corporations to coordi-nate global projects and to develop sensor standardsthat result in reducing inventory costs and simplifyingmaintenance.

Our Mission

We contribute to our customers’ success by providing innovativesolutions through continuous developmentof our people, productsand processes.

The ifm Advantage

ifm has built a business model that focuses onworking directly withour customers.

There are no compro-mises when it comes toour customers’ success.

Reliable customer service and supportfrom a dedicated ifm team

Research and Development

The ifm product development engineers designand test sensors in conditions that far exceedactual application environments. There can be no compromises when it comes to uptime in your facility.

Our team designs products that reduce machinedowntime, increase productivity and simplifyinstallation.

On-time DeliverywithAccuracy

R&D thatDelivers Solutions

ifm efector’s CustomerSupport Network isdesigned to provide you with technical support and applicationsolutions anywhere inNorth America.

For immediate service,call 800-441-8246.

Company

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

6

Company

www.ifm.com

Content-rich website with search tools to help you find the right products quickly

ifm’s award-winning website offers a comprehen-sive product offering displayed in a concise layoutfor easy navigation. Users can take advantage ofmultiple search tools that expedite quick productsearches either by application or by specification.Users can also view products by specific industrybuying patterns.

The one-stop-shopping layout ensures that a usercan find a product and its required accessories onone page. Data sheets, CAD drawings and instal-lation instructions are linked to every product, inmultiple languages.

In the US: www.ifm.com/us

In Canada: www.ifm.com/ca

In Mexico: www.ifm.com/mx

Product e-Catalog

Save time and quickly find products for your applications with ifm’s easy-to-use Product e-Catalog. The e-Catalog offers simple navigation and features ifm’s completeproduct family at-a-glance. Once you select your product family, your search isnarrowed down by application environment and by housing size.

Top Sellers

Want to know the top-selling sensor solutions in your industry? The Top Sellers tooloffers a list of top-selling products for various applications within an industry. Resultsare based on buying patterns of over 20,000 ifm customers in the US.

Product Selector

Streamline your product search with Selector. Simply select your preferred output,voltage, sensing range and other sensing parameters until the recommended sensorappears. Selector’s “Compare” feature allows you to see two products side-by-side for comparison.

Summary Specs for Project and Estimate Bids

Summer Specs provides all the information required to take a project from bid… todesign… to final build. Whether you're a machine builder, integrator or engineeringfirm, ifm’s Summary Specs makes it easy for you to apply our products throughout thedesign process. Compile information easily – cut and paste technical data, downloadscale drawings, and attach installation instructions available in multiple languages forproducts that cross international borders.

c a t a l o g

o pse l l e r s

se l e c t o r

p e c sSS

7

Company

www.ifm.com

Order online... it’s convenient, quick and easy to use

Purchase sensors and controls using e-Shop

From our website to your plant, use e-Shop to purchase sensors and controls… It’s easy!

• Available 24 hours a day.

• Choose from more than 5,000 sensors and controls products.

• Create your personal Favorites list of products.

• Store your favorites for future use.

• Use the 'Quick Order' feature for regularly ordered products.

• Orders are shipped from our central warehouse. Select your preferred shippingmethod – UPS or FedEx.

• For your convenience, supply your company shipping account number.

• Select your payment method - credit card (American Express, Visa or MasterCard)or Purchase Order number.

• Shipping confirmations are emailed to you with tracking number.

• Track the status of your online purchase via My History.

• ifm products are backed with 2-year and 5-year warranties.

From our website to your plant, use e-Shop to purchase sensors and controls… It’s easy!

Orders are shipped from our centralwarehouse. Select your preferredshipping method – UPS or FedEx.

e-Shop is available 24 hours a day. Choose from more than5,000 sensors and controls products.

In the US: www.ifm.com/us/eshop

In Canada: www.ifm.com/ca/eshop

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

8

Solutions for food and beverage applications

www.ifm.com

Magnetic sensors detect U-tubeposition in flow diverter panels

ifm magnetic sensors detect a magnetthrough a stainless steel plate to sensethe U-tube position on a flow diverterpanel. Magnetic sensors offer extremelylong sensing ranges – up to 70mm – and high switching frequencies.

See pages 22 - 25

Quarter-turn valve position in tank farms and valve skids

Quarter-turn actuators are used forprocess control in tank farms, divertervalves, and valves skids. ifm’s valveposition sensor and rotating targetpuck are mounted on top of an actua-tor to indicate the open and closedposition of a valve. Non-contact sensingprovides long life-in-application.

See pages 34 - 37

Cylinder sensors detect piston position in pneumatic cylinders

Pneumatic cylinders are used in manyareas of the food industry. ifm cylinderposition sensors reliably detect pistonposition through the cylinder housingwall. The sensors feature durable housings with an IP69K protection rating that resists liquid ingress. Thesensors easily mount to smoothcylinders using ifm’s adapter system.

See pages 26 - 27

Fail-safe sensors detect manwaydoor position for safe access to tank

ifm’s fail-safe inductive sensors detect the open and closed position of astainless steel manway door. The fail-safesensors help prevent access to a tankwhile in operation. ifm’s fail-safe sensorsdo not require coded magnets or mech-anical keys which reduces installationtime and misalignment issues. The sensors are rated up to SIL 2 or SIL 3according to IEC 61508.

See pages 46 - 47

9


www.ifm.com

Photoelectrics provide positiondetection in packaging applications

ifm’s OG Series photoelectrics aredesigned to withstand washdownenvironments in food packagingapplications. The industry standard 18 mm diameter housings are 316stainless steel and resistant to chemicalsolutions used in cleaning. The sensor’szero-leak design prevents liquid ingress.

See pages 28 - 29

Photoelectrics provide clear objectdetection in packaging lines

One of the most difficult photoelectricapplications is the detection of clearobjects such as PET bottles. Standardsensors typically have too much excessgain and burn through the clear material. ifm’s O5 Series clear objectsensor offers reliable detection of transparent objects and an extremelylong sensing range – up to 1.5 meterswhen used with an ifm reflector.

See pages 32 - 33

Photoelectrics withstand aggressivecleaning cycles in food production

In food production, the use of harshchemicals during cleaning cycles iscommon. The Ecolab-certified OGSeries photoelectric sensors resistchemicals and aggressive cleaningagents. The sensor’s plastic lens eliminates the possibility of glasssplintering in food and beverageingredients during production.

See pages 28 - 29

Rising stem valve sensors offer continuous feedback of valves

Valve manifolds offer a number of filling and emptying routes withoutmanually opening pipes or recouplingpanels. ifm’s 316 stainless steel inductive sensors are used to detect theopen and closed position of the valve.The sensor’s FDA-approved PEEK sens-ing face material is resistant to extremetemperature fluctuations.

See pages 18 - 19

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

10


www.ifm.com

Flow sensors monitor pumps to prevent run-dry conditions

Conveying liquids and liquid food suchas dairy products and beveragesrequires proper flow monitoring. ifm’sSI Series flow sensors can monitor apump to provide run-dry protection.The sensor’s stainless steel probe has nomoving parts that can stick or break inthe process.

See pages 60 - 61

Pressure sensors monitor line pressure to keg cleaning machine

Kegs require cleaning before they arefilled with beverages. ifm’s PI Series andPG Series pressure sensors monitor thecorrect pressure of the cleaning agent.The sensor’s 4-digit numeric displayindicates system pressure and its push-button setup reduces installation time.

See pages 52 - 59

Pressure sensors detect line pressure to homogenizers

In dairy applications, homogenization is used to process milk fat globules intoa uniform consistency. The ifm PYSeries pressure sensor is designed tomonitor line pressure to the homoge-nizer. The sensor features simple push-button setup and an integrated built-indisplay that eliminates the need for agauge.

See pages 56 - 57

Pressure sensors monitor level invarious storage and mixing tanks

To monitor level in storage tanks, silotanks, mixing tanks, and process tanks,ifm’s PI Series and PG Series pressuresensors are an ideal solution. Theweight of the liquid creates pressure onthe sensor’s diaphragm. As the levelchanges, the pressure output changesproviding reliable and highly accuratepressure indication.

See pages 52 - 55

11


www.ifm.com

Pressure sensors indicate line pressure in filter monitoring

Filters are required in nearly all produc-tion processes to clean a product or for removing water from a product. ifm pressure sensors monitor the pressure of the liquid upstream anddownstream of the filter. An integratedbuilt-in display eliminates the need for a gauge.

See pages 52 - 57

Temperature transmitters monitorprocess temperature in pasteurizers

Pasteurization is one of the mostimportant processes in milk treatment.Maintaining the correct exposure timeand temperature of 60°C to 70°C iscritical to the process. The TAD Seriestemperature transmitters accuratelymonitor process temperature. A dualRTD design allows for self-verifying driftdetection, eliminating the need or regular calibration checks.

See pages 68 - 69

Temperature transmitters indicatetemperature in heat exchangers

In indirect heating, heat exchangers such as plate heat, tubular heat andscraped surface heat are used for heattransmission. To monitor the tempera-ture of the line leading to and from theexchanger, ifm’s temperature transmit-ters are an ideal solution. They can befitted with a variety of sanitary adaptersand flexible RTD lengths to suit anapplication.

See pages 62 - 67

Temperature transmitters offeraccurate process temperature

Temperature monitoring is one of the most important process indicationsin the food industry. ifm’s TA seriestemperature transmitter offers acompact measuring system that can be easily installed with standardTri-clamp® fittings. The transmitter has a 316 stainless steel housing that resists liquid ingress.

See pages 66 - 67

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

12


www.ifm.com

efector Metris flow meter monitorsair and specialty gases in a plant

In cheese production, different types of presses are used such as trolley table, tunnel and conveyor presses.Compressed air is required to controlthe various pneumatic cylinders neededfor these presses. The efector Metris in-line flow meter monitors compressedair throughout the plant. The meterfeatures a 4-digit display and providesanalog, switching and pulse outputs.

See pages 90 - 91

efector Octavis diagnostic systemmonitors machine condition

Food processing machines such asseparators can be continuously moni-tored using vibration analysis to preventequipment downtime. efector Octavisprovides continuous vibration analysis on a separator’s internal rotating compo-nents such as bearings and spindles. Asvibration levels exceed the allowablelimits, maintenance measures can beplanned to prevent machine failure.

See pages 86 - 89

efector Octavis vibration monitorcontinuously monitors equipment

Critical machines such as the homoge-nizer is crucial to food processing. If amachine fails, plant downtime andstandstill costs can be incurred. Theefector octavis vibration monitorcontinuously monitors the rotatingcomponents of a machine. The monitorcan evaluate the machine’s vibrationcharacteristics to indicate potential failure.

See pages 86 - 89

Rising stem valve position sensorscontinuously monitor valve position

Rising stem valves are actuated by alinear stroke. The efector Valvis risingstem valve sensor provides continuousvalve position feedback and can signalup to three valve positions: valve open,valve closed and any interim positionsuch as seat lift /seal wear. The sensorsfeature simple pushbutton setup andprovide LED feedback for status indication.

See pages 38 - 39

13


www.ifm.com

O1D distance measurement sensorsin food and beverage production

ifm’s O1D Series photoelectric distancemeasurement laser sensors are placedin key positions during ice cream production. Because of their longranges, they can be placed outside the wet environment. A large 4-digitalphanumeric display indicates measured distance.

See pages 30 - 31

Stainless steel I/O module with AS-inetworking reduces wiring

AS-interface has become theestablished standard for networkingsensors and actuators. This networkcan operate directly in conjunction with an existing PLC or can be linked to a higher-level bus system for low-cost remote I/O. The AS-i stainless steelProcessLine field module can be used in wet areas and connects multipledevices.

See pages 72 - 83

Pressure sensors monitoring linepressure to a pump

The compact PI Series pressure sensorsmonitor line pressure to food and beverage processing equipment. PISeries sensors incorporate a ceramicsensing element that can withstandpressure spikes. The sensors feature a bright 4-digit numeric display forpressure indication.

See pages 52 - 53

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

LMT Series point-level sensorignores foam, residue and build-up

ifm’s LMT Series point-level sensormonitors the level of liquids, viscousmedia and powders in food and beverage applications. In this example,the LMT sensor detects the level of chocolate in a tank. The sensoreliminates the challenges with residueand build-up that commonly causetraditional point-level sensors to outputfalse signals.

See pages 70 - 71

14

CE - With the CE marking the manufacturer documents that the units sold adhereto the European directives for specified electrical equipment.

Standards and approvals

EHEDG - The EHEDG (European Hygienic Equipment Design Group) prepares guide-lines for Europe concerning the requirements for measuring systems in machinesfor the food and pharmaceutical industry. Units with the EHEDG marking have beentested and approved for the food and pharmaceutical industry in accordance withthese guidelines.

3A - Units with this marking comply with the hygienic standards applicable in theUS. They are approved for use in hygienic applications in the dairy industry.

UL / CSA or cULus - Units with this marking meet the requirements of UL (Under-writers Laboratories Inc.) and CSA (Canadian Standards Association). In many casesthis approval is a prerequisite for access to the North American market. cULus is acombined approval and corresponds to the two individual approvals CSA and UL.

FDA - FDA (Food and Drug Administration) is a US supervisory authority for foodand drugs. This authority grants approvals for materials used in the food andpharmaceutical industries.

Many ifm sensors are Ecolab certified

Ecolab® is a global leader in the development of premium cleaning, sanitizing andhygiene products for the food processing, beverage, dairy and pharmaceuticalindustries. Known for their demanding standards, Ecolab tested the integrity andquality of ifm sensors, connectors and cables for use in washdown environments.

Independent tests were performed by Ecolab on the ifm inductive proximity sensors,the OG Series washdown sensors and the AS-i ProcessLine modules. Ecolab certifiedthat ifm products resisted the cleaning chemicals used in the tests.

Inductive proximity sensors OG Series washdown sensors AS-i ProcessLine modules

Food specific approvalsand testing

www.ifm.com

15

Food specific approvals and testing

www.ifm.com

0˚

30˚

30 second cycles4 GPM water@ 140 °F1500 psi

60˚

90˚

4"

IP69K high-pressure cleaning test

ifm inductive proximity sensors were tested in accordance with the IP69K standard.The goal of this test is to duplicate pressure cleaning conditions on a plant floor.

In the test fixture, the sensors were exposed to a 1500 psi spray of water at atemperature of 176 ˚F. The duration of each cleaning cycle was 30 seconds. Thetest was performed at specified angles using a spray nozzle located at a distance of 4” from the switch.

The sensors can withstand test conditions and is still operable providing 100% ofits sensing range.

IndustryStandard

Acceleration (g)

0 25030 500

ifmsensor

Shock test

Proximity sensors can be exposed to high levels of shock in industrial environments.ifm sensors were tested at a shock level of 500g. This test standard sets a newbenchmark for proximity sensor product development.

Vibration test

A vibration test was performed on sensors at a level of 40g with the oscillationfrequency spanned between 0 and 2000 Hz. This test checked the integrity of theelectronic circuit and the surface-mounted components. The vibration test wasdesigned to far exceed manufacturing plant conditions on industrial automationmachinery.

Oscillation Frequency (Hz)

10 50 100 500 1000 3000

10

0

20

30

40

Acc

eler

atio

n(g

)

Industry Standardifm sensor

Steam boiler test

To simulate the aging process, OG washdown sensors are placed in a steam boilerat 80°C. After defined time intervals, the sensors are submerged into ice water.Following the test, the sensor is subjected to a variety of function tests that deter-mine its durability.

0

20

40

60

80

100

Time Intervals (min.)

Tem

pera

ture

(˚C)

60 10 60 10

Thermal shock test

In pressure cleaning environments, proximity sensors can be exposed to extremetemperature conditions. A thermal shock test was performed on ifm sensors bycycling the temperature between 0 ˚C and 100 ˚C in short time intervals.After the test, the sensors’ characteristics are tested to ensure high reliability.

Designed, manufactured and tested to perform in washdown applications

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

16

Stainless steel sensor face and housingwithstand damage from physical impact

Chemically compatible with industrialcaustic and acid solutions

Thermal shock tested to withstandtemperature fluctuations up to 100°C

Zero leak design prevents ingress duringhigh pressure cleaning and steam cleaning

360° ring LED design indicates power and output

Designed and tested for use in high temperature (0 to 100°C) food and beverage applications ifm’s stainless steel metal face sensors are designed and tested to provide reliableposition detection in extreme environments found in food and beverageapplications. The sensor’s 316 stainless steel housing is chemically-compatible withindustrial cleaning solutions and will not corrode. The sensor’s zero-leak design,rated IP69K, prevents ingress during high-pressure cleaning and steam cleaning.

Inductive sensors

www.ifm.com

Tested to extremesifm stainless steel sensors are subjected to a variety oftests that insure reliable performance in the application.These tests include the IP69K high pressure cleaningtest, thermal shock test, and shock and vibration tests.The sensor’s high-grade stainless steel housingwithstands damage from impact in diverter panels. Stainless steel metal face sensors are designed

for food and beverage applications.

0

20

40

60

80

100


Tem

pera

ture

(˚C)

60 10 60 100˚

30˚


60˚

90˚

4"

IP69K high-pressure cleaning

Sensors are exposedto a 1500-psi spray at a 4" distance. The 140° F water issprayed in 30-sec-ond cleaning cycles.

Thermal shocktest

Sensors are sub-jected to tempera-tures fluctuationsbetween 0° C and100° C in shorttime intervals.

Impact indiverter panels

Metal face sen-sors withstanddamage fromimpact in diverterpanels.

ifm sensor

Metal face inductive sensors

New Non-flush

Models

New Non-flush

Models

17

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Inductive sensors

DC • Inductive sensors for washdown environments

Type DimensionsDiameter / Length

[mm]

SensingRange[mm]

Material SupplyVoltage

[V]

Protection SwitchingFrequency

[Hz]

Max LoadCurrent

[mA]

PartNo.

M12 diameter · M12 connector · Output function N.O. · DC



M12 / L = 60 3 f 316 stainless steel 10...36 DC

OutputType

PNP IP68 / IP69K 100 100 IFT 240

M12 / L = 60 3 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 100 100 IFT 244

M12 / L = 70 6 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 500 100 IFT 245

M12 / L = 70 6 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 500 100 IFT 246

M18 / L = 70 5 f 316 stainless steel 10...36 DC PNP IP68 / IP69K 100 100 IGT 247

M18 / L = 70 5 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 100 100 IGT 248

M18 / L = 70 12 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 500 100 IGT 249

M18 / L = 70 12 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 500 100 IGT 250

M30 / L = 70 10 f 316 stainless steel 10...36 DC PNP IP68 / IP69K 50 100 IIT 228

M30 / L = 70 10 f 316 stainless steel 10...36 DC NPN IP68 / IP69K 50 100 IIT 230

M30 / L = 70 25 nf 316 stainless steel 10...36 DC PNP IP68 / IP69K 250 100 IIT 231

M30 / L = 70 25 nf 316 stainless steel 10...36 DC NPN IP68 / IP69K 250 100 IIT 232

www.ifm.com

Accessories

Type Description PartNo.

Angle bracket for types M12 U 20301



Plastic nut for flow plate M18 x 1

E 19503

Cordsets


M12 Micro DC (4-pin), 5 m, PVC EVT 001






M12 Micro DC (4-pin), 5 m, PVC, 3 LED EVT 007



NEWNON-FLUSH

18

316 stainless steel housing rated IP69K forhigh pressure cleaning environments

Extended sensing range reduces failure frommechanical damage and increases uptime

Temperature-resistant PEEK plastic sensingface and gold-plated contacts

Ecolab certified – resistant to cleaning agentsand withstands harsh environments

Four set-up LEDs provide 360-degree visibility of output status

ifm inductive sensors for food and beverage applicationsifm inductive sensors are designed and tested to provide reliable position detectionin food and beverage applications. The industry standard housings are 316 stainlesssteel that are rated IP69K to withstand liquid ingress in high pressure cleaning envi-ronments. The sensor’s FDA-approved PEEK sensing face material is resistant toextreme temperature fluctuations from 32° to 212°F (0 to 100°C).

Extended sensing rangesifm’s inductive sensing ranges are up to twice as long as conventional switches ofthe same housing size. The sensors can be placed farther away from the target toprovide a greater margin of safety and to prevent mechanical damage caused byphysical contact.

Tested to perform in washdown applicationsSensors used in the food and beverage and pharmaceutical industries are pressure-cleaned with caustic and acid solutions. To ensure the sensors can perform in thisenvironment, they are subjected to the following tests.

Inductive sensors

www.ifm.com

0

20

40

60

80

100


Tem

pera

ture

(˚C)

60 10 60 100˚

30˚


60˚

90˚

4"

IP69K high-pressure cleaning

Sensors are exposedto a 1500-psi spray ata 4" distance. The140° F water issprayed in 30-second cleaning cycles.

Thermal shock test

Sensors are subjectedto temperatures fluc-tuations between 0° Cand 100° C in shorttime intervals.

Inductive proximity sensors

19

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Inductive sensors

DC • Inductive sensors for washdown environments


[mm]

SensingRange[mm]


[V]


[Hz]

Max LoadCurrent

[mA]

PartNo.

M12 diameter · M12 connector · Output function N.O. · DC PNP

M12 / L = 45 4 f 316 stainless steel 10...36 DC IP68 / IP69K 800 100 IFT 203

M12 / L = 50 7 nf 316 stainless steel 10...36 DC IP68 / IP69K 800 100 IFT 200

www.ifm.com

Accessories





Mounting clamp Ø 12 mm E 11047




E 19503

Cordsets












M18 / L = 46 8 f 316 stainless steel 10...36 DC IP68 / IP69K 600 100 IGT 203

M18 / L = 51 12 nf 316 stainless steel 10...36 DC IP68 / IP69K 300 100 IGT 200


M30 / L = 50 14 f 316 stainless steel 10...36 DC IP68 / IP69K 50 100 IIT 205

M30 / L = 70 15 f 316 stainless steel 10...36 DC IP68 / IP69K 50 100 IIT 212

M30 / L = 70 22 nf 316 stainless steel 10...36 DC IP68 / IP69K 100 100 IIT213

M30 / L = 50 22 nf 316 stainless steel 10...36 DC IP68 / IP69K 100 100 IIT 200

20

316 stainless steel housing rated IP69K forhigh pressure cleaning environments

Extended sensing range reduces failure frommechanical damage and increases uptime

Temperature-resistant PEEK plastic sensingface and gold-plated contacts

Ecolab certified – resistant to cleaning agentsand withstands harsh environments

Four set-up LEDs provide 360-degree visibility of output status

Inductive sensors

www.ifm.com

ifm inductive sensors for food and beverage applicationsifm inductive sensors are designed and tested to provide reliable position detectionin food and beverage applications. The industry standard housings are 316 stainlesssteel that are rated IP69K to withstand liquid ingress in high pressure cleaning envi-ronments. The sensor’s FDA-approved PEEK sensing face material is resistant toextreme temperature fluctuations from 32° to 212°F (0 to 100°C).

Extended sensing rangesifm’s inductive sensing ranges are up to twice as long as conventional switches ofthe same housing size. The sensors can be placed farther away from the target toprovide a greater margin of safety and to prevent mechanical damage caused byphysical contact.

Tested to perform in washdown applicationsSensors used in the food and beverage and pharmaceutical industries are pressure-cleaned with caustic and acid solutions. To ensure the sensors can perform in thisenvironment, they are subjected to the following tests.

0

20

40

60

80

100


Tem

pera

ture

(˚C)

60 10 60 100˚

30˚


60˚

90˚

4"

IP69K high-pressurecleaning

Sensors are exposedto a 1500-psi spray at a 4" distance. The 140° F water issprayed in 30-second cleaning cycles.

Thermal shock test

Sensors are subjectedto temperaturesfluctuations between0° C and 100° C inshort time intervals.

Inductive proximity sensors

21

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Inductive sensors

AC/DC • Inductive sensors for washdown environments


[mm]

SensingRange[mm]


[V]


[Hz]

Max LoadCurrent

[mA]

PartNo.

M18 diameter · 1/2“ connector · Output function N.O. · AC/DC

M18 / L = 70 5 f 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 400 200 IGT 002

M18 / L = 70 12 nf 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 300 200 IGT 001

www.ifm.com

Accessories



E 19503



M30 diameter · 1/2“ connector · Output function N.O. · AC/DC

M30 / L = 70 14 f 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 100 200 IIT 001

M30 / L = 70 22 nf 316 stainless steel 20...140 AC/DC IP68 / IP69K 25 / 100 200 IIT 002



Cordsets


1/2" Micro AC (3-pin), 5 m, PVC E 18206






22

Magnetic sensor detects target fitted with magnet

Rated IP69K for high pressure cleaningenvironments

Small housings with extended sensingranges up to 76 mm

316 stainless steel sensing face and housingwithstand damage from physical abuse

Temperature shock resistant in the rangeof 0...100 °C

Demanding applicationsifm magnetic proximity sensors provide non-contact indication for position andspeed applications. The sensors can detect a magnet through materials such asstainless steel, non-ferrous metal, aluminum, plastic and wood. With the integrationof Giant Magnetoresistive (GMR) technology, ifm magnetic sensors offer extremelylong sensing ranges – up to 76 mm – and high switching frequencies.

Long sensing range and high switching frequencyMagnetic sensors have a considerably higher sensing range compared to inductivesensors. They detect damping magnets without contact up to 76 mm. ifm sensorsreach a switching frequency of more than 5,000 Hz. This high switching frequencyapplies to the whole temperature range.

Magnetic sensors

www.ifm.com

Position and speed application examples:

Magnetic sensorsdetect the U-tubeposition in a diverterpanel by sensing amagnet through astainless steel plate.

ifm’s magnetic prox-imity sensor is usedfor pulse evaluationby detecting a mag-net mounted onrotating machinery.Ideal for high-speedapplications.

Metalface magnetic sensors

23

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Magnetic sensors

DC • Magnetic sensors for washdown environments


[mm]

SensingRange[mm]


[V]


[Hz]

Max LoadCurrent

[mA]

PartNo.


M12 / L = 60 60 316 stainless steel 10...30 DC IP68 / IP69K 5000 200 MFT 202


M18 / L = 60 70 316 stainless steel 10...30 DC IP68 / IP69K 5000 200 MGT 203

www.ifm.com

Accessories


Disk magnet, 30 x 10 mmBarium ferrite

E 10752

Disk magnet, 40 x 13 mmM5 mounting stud, 316Ti, stainless steel

E 11803

Disk magnet, 20 x 9.5 mmM5 mounting stud, 316Ti, stainless steel

E 12291



Cordsets











24

Magnetic sensors designed to reliablydetect pigs moving at high speedsor in a stopped position

Integrated 1 second stretched output tocompensate for PLC scan time lag

316 stainless steel housing to withstandthe harshest environments

Rated IP68/IP69K for high pressurecleaning environments

Broad temperature range from 0...104 °C

Reliable pig detection in cleaning processesifm designed the MGT 201 pig detector sensor to reliablydetect standard pigs in food and beverage applications.The sensor incorporates a built-in one second stretchedoutput to compensate for PLC scan time lag. The sensorfeatures a stainless steel housing rated IP68/IP69K and abroad temperature range from 0…104° C. ifm’s MGT 201pig detecting sensors can be used in multiple locations on a pipe to accurately locate a pig at various pointsthroughout the process.

Magnetic sensors

Magnetic sensors for pigdetection in cleaning processes

NS

Pipes are cleaned using siliconepigs encased in a magneticband. As a pig passes throughthe pipe, ifm’s magnetic sensordetects the magnetic band of the pig through the stain-less steel pipe indicating thelocation of the pig.

Propellant

Pig launch

Sensor

Sensor

Sensor

Sensor

Sensor

Pig

www.ifm.com

25

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Magnetic sensors

DC • Magnetic sensors for washdown environments


[mm]

SensingRange[mm]


[V]

Protection SignalStretcher

[s]

Max LoadCurrent

[mA]

PartNo.


M18 / L = 60 100 316 stainless steel 10...30 DC IP68 / IP69K 1 200 MGT 201

Accessories


Mounting adapter and strap for 3” pipe UM 0006

Mounting adapter and strap for 4” pipe UM 0007

Mounting adapter and strap for 2“ pipe UM 0005

Cordsets











MountingAdapter

MountingStrap

Pipe

Sensor

The sensor is inserted into the adapter and placedon the pipe. A metal strap tightens over theadapter and secures it to the pipe.

www.ifm.com

26

Magnetic T-slot sensors offer significantadvantages over Reed switch technology

Sensor easily mounts to clean line cylinderusing protective bracket with strap

Excellent repeatability and fast responsetimes enable increased uptime

Unlimited number of switching cyclesextends life-in-application

T-slot sensors easily fit most cylinder typesusing ifm mounting accessories

Cylinder sensors

www.ifm.com

Compact housing, simple mounting for washdown environmentsifm offers miniature cylinder sensors that easily fit clean line cylinders to providea low-profile mounting. An ifm protective bracket protects the sensor in theapplication.

Reed ifm Solid State Solid State Advantages

Durability Low High (1-2 M cycles) (unlimited cycles)

Repeatability Low High

Response Low HighTime

Sensitivity Low High

Temperature High HighStability

Longevity Low High

ifm cylinder sensor has unlimited number ofcycles. Typically, a reed switch is replaced manytimes during the life of a cylinder.

Provides excellent repeatability. Mechanicalwear in reed switches can cause the switchpoint to drift.

Fast response time. Reed switches with slowerresponse times cannot maintain their accuracyin high speed applications.

Can operate reliably with weak magnetic fields.Reed switches require great magnetic strength for sensing.

Extremely stable operating characteristics over awide temperature range.

Immunity from long-term effects of magneticfields. Contacts on reed switches can becomepermanently magnetized over time.

Technology comparison

Magnetic sensors forclean line cylinders

Narrow-down your cylinder sensor selectionwith Product Selector. This tool allows you to search by cylinder manufacturer orcylinder type.

Product Selector is located under the ProductCatalog tab on the ifm website.

Search for cylinder manufacturer orcylinder type with Product Selector –Go to www.ifm.com

27

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Cylinder sensors

DC • Cylinder sensors for washdown environments

Type Dimensions

[mm]


[V]

OutputType

SwitchingFrequency

[Hz]

Protection Max LoadCurrent

[mA]

PartNo.

M12 threaded 0.3 m pigtail · Output function N.O.

25 x 5 x 6.5 PA (polyamide) 10...30 DC PNP > 6000 IP67 / IP69K 100 MK 5157

25 x 5 x 6.5 PA (polyamide) 10...30 DC NPN > 6000 IP67 / IP69K 100 MK 5186

Prewired 2 m cable · Output function N.O.

25 x 5 x 6.5 PA (polyamide) 10...30 DC PNP > 3000 IP67 / IP69K 100 MK 5158

www.ifm.com

Required mounting accessories:

T-slot sensor mounts on clean line cylinders using a fixing strap and adapter. Select accessory kit according to cylinder diameter.

Type For cylinder diameter measuring…

PartNo.

11…19 mm E 11975

18…29 mm E 11976

28…39 mm E 11977

38…49 mm E 11978

48…59 mm E 11979

58…69 mm E 11980

78…89 mm E 11981

98…109 mm E 11982

Cordsets








Fixing strap and adapter kit

For more mounting options, call 800-441-8246 or visit www.ifm.com

Measure the outside diameter of your cylinder to

determine the appropriatemounting accessory.

28 www.ifm.com

Industry standard 18mm stainless steelhousing available in quick disconnect or prewired

Ecolab certified sensors resistant tochemicals used in washdown environments

Visible red light source simplifies installation and maintenance

Plastic lens eliminates the possibility ofglass splintering into food and beverages

High grade stainless steel mounting accessories available

OG Series photoelectrics for washdown applicationsifm's OG Series photoelectric sensors are designed and tested to provide reliableposition detection in extreme washdown conditions. Industry standard 18mmdiameter housings are 316 stainless steel and are ideal for food and beverageapplications. The OG wetline series was specially developed for applications in the food industry, such as cheese plants, breweries and the meat industry.

A visible red light source simplifies installation and maintenance. High-gradestainless steel mounting accessories are available for quick installation.

Ecolab-certified for food and beverage The Ecolab-certified sensors are resistant to chemical solutions used in cleaning andsteam cleaning. The sensor's zero-leak design prevents ingress during high pressurecleaning, and the sensor's plastic lens eliminates the possibility of glass splintering infood and beverage processes.

Steam boiler testTo simulate the aging process, OG washdown sensors are placed in a steam boiler at 80°C. After defined time intervals, the sensors are submerged into icewater. Following the test, the sensor is subjected to a variety of function tests that determine its durability.

The right combination of price and performanceifm OG sensors offer high performance, long life-in-application and a great valueresulting in savings for your food processing facility.

Photoelectric sensors

Photoelectrics for washdown

OG Tubular

OG Cube

OG TubularPrewired

29www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • OG photoelectric for washdown environments

Type Operating Principle

Range Spot Ø atMaximum Range

[mm]

Output SupplyVoltage

[V]

6m CablePartNo.

M18 diameter · M12 connector or 6 meter prewired

Through-beam receiver 20 m – DO PNP 10...36 DC OGE 302

Through-beam receiver 20 m – LO PNP 10...36 DC OGE 303


Diffuse, with background suppression 100 mm 8 LO PNP 10...36 DC OGH 306

Diffuse, with background suppression 100 mm 8 DO PNP 10...36 DC OGH 307






Polarized retro-reflective 4 m 160 DO PNP 10...36 DC OGP 302

Polarized retro-reflective 4 m 160 LO PNP 10...36 DC OGP 303


Through-beam transmitter 20 m 800 – 10...36 DC OGS 301

M12 ConnectorPartNo.

OGE 300

OGE 301

Through-beam receiver 20 m – DO PNP 10...30 DC –

Through-beam receiver 20 m – LO PNP 10...30 DC –

Through-beam receiver 20 m – DO NPN 10...30 DC –

OGE 380

OGE 381

OGE 382

OGH 300

OGH 301

OGH 302

OGH 303

Diffuse, with background suppression 100 mm 7 LO PNP 10...30 DC –

Diffuse, with background suppression 200 mm 13 LO PNP 10...30 DC –

Diffuse, with background suppression 100 mm 7 LO NPN 10...30 DC –

Diffuse, with background suppression 200 mm 13 LO NPN 10...30 DC –

OGH 380

OGH 381

OGH 382

OGH 383

OGH 304

OGH 305

Diffuse, with background suppressionAdjustable

15…300 mm25

ProgrammableLO/DO PNP

10...36 DC OGH 313OGH 312

OGP 300

OGP 301

OGS 300

Accessories


Tall swivel bracket for OG, stainless steel

E 20869

Short swivel bracket for OG, stainless steel

E 20870

80 mm reflector

50 mm reflector

E 20005

E 20956

Swivel bracket includes 80 mm reflector,stainless steel

Swivel bracket includes 50 mm reflector,stainless steel

E 20996

E 20998

Cordsets











Through-beam transmitter 20 m 800 – 10...30 DC –OGS 380

30 www.ifm.com

Reliable solutions for long-range object detection and level applicationsThe O1D laser sensor provides non-contact distance measurementup to 10 meters. For longer distances, the O1D106 provides adistance measurement of 75 meters when used with a reflector.

To measure level in food processing applications, the O1D300 isspecifically designed for this application and offers a range of up to 10 meters.

Contained in a compact, robust metal housing that measures only 42 mm x 42 mm,the sensor is suited for food and beverage applications and mounts easily in applica-tions with limited space. The sensor’s display can be programmed for two setpointsor for one setpoint and one analog output. The display can also provide distancevalues in inches, millimeters or meters.

ifm O1D advantageBackground suppression and ultrasonicsensors are lower-cost alternatives fordistance measurement but have shorterranges. Traditional time-of-flight systemsoffer an improved level of performance but are much higher in cost. The ifm O1Dsensor combines the advantages of thesesystems at an affordable price.

Right balance of performance, size and pricefor distance measurement applications

O1D Series sensors are ideal for long-rangebackground suppression applications

Simple pushbutton setup quicklyestablishes parameters

Model O1D 300 detects level of food and opaque liquids

Large 4-digit alphanumeric displayindicates measured distance

Multiple outputs: single switching, dualswitching or switching and analog output


sensors with back-ground suppression

ultrasonicsensors

ifm O1D

Perf

orm

ance

Price

traditionaltime-of-flightsystems

Multiple O1D sensors can be mountedin a food process.

Laser distance and level sensors

31www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • Laser distance measurement sensor

DC • Level sensor

OutputOperatingPrinciple

Type MeasuringRange

Spot Ø at Max Range

SupplyVoltage

[V]

CurrentConsumption

[mA]

Sampling Frequency

[Hz]

PartNo.

Laser distance · M12 connector · 42 x 52 x 59 mm metal body

Optical level sensor for bulk materials and opaque liquids · M12 connector · 42 x 52 x 59 mm metal body

4-20 mA / 0-10 VDC and PNP or dual PNP

0.2...10 m 6 18...30 DC 150 1...50 O1D 100


0.3...6 m 6 18...30 DC 150 1...33 O1D 155


0.2...10 m 6 18...30 DC 150 1...33 O1D 300

LO/DO PNP 0.2...10 m 6 10...30 DC 150 5 O1D 101


1...75 m* 150 18...30 DC 150 1...33

LightSource

Class 2 laser Red light

4-20 mA / 0-10 VDC and NPN or dual NPN

0.2...10 m 6 18...30 DC 150 1...50 O1D 103Class 2 laser

Red light

Class 1 laserRed light

Class 2 laserRed light



O1D 106

LO/DO NPN 0.2...10 m 6 10...30 DC 150 5Class 2 laser

Red lightO1D 104

Accessories


Rail mount swivel bracket for O1D, stainless steel

E 21079

Protective plastic cover E 21133

Reflector · 95 x 95 mmfor O1D106

E 20454

Sanitary G1 BSPP adapter, stainless steel

E 21224

Reflector · 226 x 262 mmfor O1D106

E 21159

Cordsets

* Reflector required to achieve 75 meter range.

Polarized retro-reflective

Diffuse reflectivewith background

suppression

Diffuse reflectivewith background

suppression











32 www.ifm.com

Color sensor features high color contrastsensitivity and resolution

Clear object sensor detects glass, film, PETbottles and transparent objects

Contrast sensor uses reliable RGB technology to determine the best LEDcolor to contrast two target colors

High switching frequencies for fastmoving applications

Auto-detect for PNP/NPN configurationand “Teach Mode” setup

LED display indicates output status

O5G Series clear object sensorsThe O5G Series clear object sensors can solve one of the most difficultphotoelectric applications – the detection of clear objects such as film,glass, or PET plastic bottles and transparent packaging. Standard sen-sors typically have too much excess gain and “burn“ through the clearmaterial. The sensor’s automatic calibration and quick pushbuttonsetup enables reliable detection of clear objects.

O5C Series color sensors for error-proofing applicationsifm’s O5C Series color sensors identify objects by color in food andbeverage applications. The sensor uses reliable RGB technology toprovide high-resolution detection of color in fast-moving applications.Five selectable tolerance steps establish allowable color differentiation.A simple one-step teach function quickly establishes the parameter of an application. The sensor’s high switching frequency of 2,000 Hzprovides accurate color detection in high-speed applications.

O5K Series contrast sensors for object detectionifm’s high performance O5K Series contrast sensors offer a variety ofsensing solutions for the packaging, assembly, material handling andprinting industries. The sensor is ideal for detecting registration marksor printed color bars by determining the difference between the targetand the background. The sensor offers high-color contrast sensitivityand resolution to provide reliable object detection.


The O5 detects properorientation in fast-moving applications.

The O5 can determinethe presence of a labelwhile ignoring back-ground colors.

Additional applications

Color, contrast and clearobject and sensors

The O5C can detect varia-tions of the same color.

The O5G clear objectdetection.

The O5K can identify thebest color for contrast.

33www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Color, contrast and clear object sensors

DC • Clear object photoelectric sensor


Range

[mm]

Spot Ø atMaximum Range

[mm]

OutputLight-on or

Dark-on

SupplyVoltage

[V]

PartNo.

70 x 47 x 18 mm plastic body · M12 connector

Polarized retro-reflective 1500 40 LO / DO PNP / NPN 10...36 DC O5G 500

DC • Contrast photoelectric sensor


Range

[mm]


[mm]

OutputLight-on or

Dark-on

SupplyVoltage

[V]

PartNo.


Diffuse 18…22 1.5 x 5 LO / DO PNP / NPN 10...36 DC O5K 500

SwitchingFrequency

[Hz]

1,500

DC • Color photoelectric sensor


Range

[mm]


[mm]

OutputLight-on or

Dark-on

SupplyVoltage

[V]

PartNo.


Diffuse 15…19 2.5 x 6 LO / DO PNP / NPN 10...36 DC O5C 500

SwitchingFrequency

[Hz]

2,000

SwitchingFrequency

[Hz]

10,000

Accessories


50 mm reflector E 20722

Swivel bracket for rod, stainless steel Complete set includes clamp

E 21083

Freestanding mounting bracket, stainless steel

E 21087

Cordsets











34

Non-contact sensor detects open andclosed position of quarter-turn valves

Sensor and target puck feature low-profiledesign that’s 1/4 the size of switchboxes

Bright LED indicates open / closed valve position

No open cavities, completely sealedagainst the effects of liquids

Installed in less than 60 seconds

Quarter-turn valve position sensors

Quarter-turn valves with pneumatic actuators are used for process control in foodprocessing applications. Typical applications include tank farms, diverter valves, valveskids, and valve banks. Accurately detecting the position of the valve is critical forprocess control. Traditionally, switchboxes have been used for position feedback.However, switchboxes are large, mounting is complex and malfunction is common.ifm offers a low-profile, non-contact solution that accurately detects when a valve isopen or closed.



Challenge: Limit switchesphysically contact cams toindicate valve position.These mechanical switchescan stick, break and wear.

Solution: ifm efector’sinductive sensing tech-nology provides non-contact sensing of valveposition. With no physicalcontact, the sensor has along life-in-application.

An ifm valve position feedbacksolution includes a sensor, cableassembly and a rotating target puck.

Target puck

Valve sensor

M12 cordset

Step 1: Select an ifm valve position sensor

Step 2: Select a target puck

Step 3: Select a cordset

Sensor

Target puck

35

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


M12 connector · Output function 2 x N.O. · PNP

40 x 26 x 47 4 nf PBT (Pocan) 10...36 DC IP67 1300 250 IN 5327

7/8“ connector · Output function 2 x N.O.

40 x 26 x 49 4 nf PBT (Pocan)20...140 AC10…140 DC

IP67 25 200 IN 0117

Terminal chamber · Output function 2 x N.O. · PNP

33 x 60 x 92 4 nf PA (polyamide) 10...30 DC IP67 500 100 IN 5409

Accessories for the IN 5409


Cable gland · M20 x 1.5 Housing materials: PA 6.6

E 12208

Protective cap · M20 x 1.5Housing materials: PA 6.6

E 12209

Cordsets





7/8” Mini AC (5-pin) 2 m, PVC E 18042

7/8” Mini AC (5-pin) 4 m, PVC E 18043

Valve position sensors with point-to-point wiring • AC/DC

Valve position sensors with point-to-point wiring • DC

Type Dimensions

[mm]

SensingRange[mm]


[V]


[Hz]

Max LoadCurrent

[mA]

PartNo.

34 mm

56 mm

YZ

M5 or 10-24

Sensor

X

4mm x 4mmslot

M6thread Z

Actuator stem fortarget pucks

M6 x 15 mm10 - 24 x 1 1/4”and M5 x 30 mm

U 20114

M6 x 15 mm10 - 24 x 2 1/8”and M5 x 55 mm

U 20118

Puck mountingscrew

Sensor mountingscrews

Part No.

M6 x 25 mm 10 - 24 x 1 1/4” UV 0002

M6 x 35 mm 10 - 24 x 1 3/4” UV 0003

M6 x 25 mm M5 x 30 mm UV 0002

1/4 - 20 x 1” 10 - 24 x 1 1/4” U 20132

M6 x 25 mm 10 - 32 x 1 1/2” UV 0002

M6 x 35 mm 10 - 32 x 1 3/4” UV 0003

M6 x 25 mm M5 x 45 mm UV 0003

Dimensions XxYxZ [mm]

80 x 30 x 20

Select a puck kit according to the dimensions of your ISO Namur actuator. The X and Y dimensions are the position of the actuator mounting holes. The Z dimension is the height of the actuator stem.

80 x 30 x 30

80 x 30 x 20

80 x 30 x 20

80 x 30 x 20

80 x 30 x 30

80 x 30 x 30

130 x 30 x 30

130 x 30 x 50

Selecting a puck kit

Puck kits for manufacturer specific actuatorsActuator Model Part No.Automax SNA050, SNA063, SNA085, SNA100 UV 0002Automax B050, B085, B100 UV 0002Bettis RPC Series 250, 450, 1000, 2250, 5000, 11000 UV 0002Bray Series 92/93, Sizes 63, 83, 92, 118, 127 U 20161Conbraco (Apollo) 3T-30, 3T-40, 3T-50, 3T-60 UV 0002El-o-matic E25, E40, E65, E100, E200, P280, E350 UV 0002Fisher 1035-E Series E25, E40, E65, E100, E200, E350 UV 0002Hytork XL45, XL70, XL130 UV 0002Hytork XL185, XL280, XL425, XL680 UV 0003Hytork XL26, XL71, XL131 UV 0002Hytork XL186, XL221, XL280, XL425, XL680 UV 0002Neles-Jamesbury VPVL01 05, 10, 20, 25, 30 UV 0002Neles-Jamesbury VPVL01 35, 40, 45 UV 0003Nibco NP20-SR, NP30-SR, NP40-SR, NP50-SR, NP60-SR UV 0002Protech Series 72/72 050, 100, 200, 250, 300 UV 0002TruTorq 2, 4, 8, 12, 20, 35 UV 0002TruTorq 55, 70, 100, 150 U 20114TYCO Series 79U, TRS, SRP, and TRP to fit .814” bore U 20128TYCO Series 79U, TRS, SRP, and TRP to fit 1” bore U 20139TYCO Series 79U, TRS, SRP, and TRP to fit 1.12” bore U 20149Ultra-flo (TRIAC) TR20, 2R40, 2R80, 2R130, 2R200, 2R300 UV 0002Unitorq M10, M20, M30, M52, M73, M103 UV 0002Unitorq M148, M222, M295 UV 0003Worcester NAMUR 1039, 1539, 2039 UV 0002XOMOX Matryx 450, 750, 1250 U 20136

For actuators not shown, call 800-441-8246 or visit www.ifm.com.

1

1

1

3

3

2

36


www.ifm.com

Actuator Sensor-interface networks an entiresystem of valves

Non-contact sensor detects open and closedposition of quarter-turn valves

AS-i networking connects up to 62 quarter-turn and 62 solenoid valves

Connects to DeviceNet, Profibus, and Ethernet

Parallel wiring is replaced by a 2-wire cablecarrying both data and power

AS-i valve position sensors

Integrated AS-i networking connection for pneumatic valves

Valve applications such as tank farms and valve skids requirea large number of feedback devices. These devices areconnected back to a PLC which monitors valve position.With the growing number of valves being used and minimalplant floor space available, wiring has become time-consuming and difficult to troubleshoot. To reduce wiring, asimple solution is to apply the AS-i networking system.

AS-i networks an entire system of valves with only one 2-wire cable, completelyeliminating wire bundles. Valve position sensors with AS-i connectivity provide anintegrated connection for the solenoid valve. Connection to the control unit is madewith a 2-wire AS-i cable. This solution provides remote indication of valve status and can connect to higherlevel bus systems via DeviceNet, Profibus, and Ethernet. Up to 62 quarter-turn valvefeedback devices and 62 solenoids can be connected to one AS-i master.

• Connects to higher-level bus systems

• Provides non-contact valve position

• Sensor and puck feature low-profile design that is one-quarter the size of aswitchbox

• The valve sensor uses an integrated output for the solenoid valve.

• Mounts on all ISO standard type actuators.

Please refer to pages 84 - 95 for more details and products for AS-i networking.

An ifm AS-i valve feedback solutionincludes a sensor, cable assembly,rotating target puck and AS-i cable

Target puck

AS-i valvesensor

AS-i cable

DIN connector

Sensor

Target puck

Step 1: Select an ifm valve position sensor

Step 2: Select a target puck

Step 3: Select a DIN-style connector

37

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

AS-i valve position sensors

Valve position sensors with AS-i networking • DC

Type Dimensions

[mm]

SensingRange[mm]


[V]


[Hz]

Max LoadCurrent

[mA]

PartNo.

AS-i connection · M12 connector · 2 inputs / 1 output · Output function transistor PNP

55 x 60 x 35 4 nf PBT (Pocan) 26.5...31.6 DC IP67 – – AC 2316

AS-i connection · M12 connector · 2 inputs


AS-i connection · M12 connector · 2 inputs / 2 outputs · Output function transistor PNP


DIN patchcords


DIN A (18 mm) to M12 Micro DC patchcords, .3 m E 11416

DIN B (10 mm) to M12 Micro DC patchcords, .3 m E 11421

DIN C (8 mm) to M12 Micro DC patchcords, .3 m E 11426

34 mm

56 mm

YZ

M5 or 10-24

Sensor

X

4mm x 4mmslot

M6thread Z

Actuator stem fortarget pucks

M6 x 15 mm10 - 24 x 1 1/4”and M5 x 30 mm

U 20114

M6 x 15 mm10 - 24 x 2 1/8”and M5 x 55 mm

U 20118

Puck mountingscrew

Sensor mountingscrews

Part No.

M6 x 25 mm 10 - 24 x 1 1/4” UV 0002

M6 x 35 mm 10 - 24 x 1 3/4” UV 0003

M6 x 25 mm M5 x 30 mm UV 0002

1/4 - 20 x 1” 10 - 24 x 1 1/4” U 20132

M6 x 25 mm 10 - 32 x 1 1/2” UV 0002

M6 x 35 mm 10 - 32 x 1 3/4” UV 0003

M6 x 25 mm M5 x 45 mm UV 0003

Dimensions XxYxZ [mm]

80 x 30 x 20

Select a puck kit according to the dimensions of your ISO Namur actuator. The X and Y dimensions are the position of the actuator mounting holes. The Z dimension is the height of the actuator stem.

80 x 30 x 30

80 x 30 x 20

80 x 30 x 20

80 x 30 x 20

80 x 30 x 30

80 x 30 x 30

130 x 30 x 30

130 x 30 x 50

Selecting a puck kit

Puck kits for manufacturer specific actuatorsActuator Model Part No.Automax SNA050, SNA063, SNA085, SNA100 UV 0002Automax B050, B085, B100 UV 0002Bettis RPC Series 250, 450, 1000, 2250, 5000, 11000 UV 0002Bray Series 92/93, Sizes 63, 83, 92, 118, 127 U 20161Conbraco (Apollo) 3T-30, 3T-40, 3T-50, 3T-60 UV 0002El-o-matic E25, E40, E65, E100, E200, P280, E350 UV 0002Fisher 1035-E Series E25, E40, E65, E100, E200, E350 UV 0002Hytork XL45, XL70, XL130 UV 0002Hytork XL185, XL280, XL425, XL680 UV 0003Hytork XL26, XL71, XL131 UV 0002Hytork XL186, XL221, XL280, XL425, XL680 UV 0002Neles-Jamesbury VPVL01 05, 10, 20, 25, 30 UV 0002Neles-Jamesbury VPVL01 35, 40, 45 UV 0003Nibco NP20-SR, NP30-SR, NP40-SR, NP50-SR, NP60-SR UV 0002Protech Series 72/72 050, 100, 200, 250, 300 UV 0002TruTorq 2, 4, 8, 12, 20, 35 UV 0002TruTorq 55, 70, 100, 150 U 20114TYCO Series 79U, TRS, SRP, and TRP to fit .814” bore U 20128TYCO Series 79U, TRS, SRP, and TRP to fit 1” bore U 20139TYCO Series 79U, TRS, SRP, and TRP to fit 1.12” bore U 20149Ultra-flo (TRIAC) TR20, 2R40, 2R80, 2R130, 2R200, 2R300 UV 0002Unitorq M10, M20, M30, M52, M73, M103 UV 0002Unitorq M148, M222, M295 UV 0003Worcester NAMUR 1039, 1539, 2039 UV 0002XOMOX Matryx 450, 750, 1250 U 20136

For actuators not shown, call 800-441-8246 or visit www.ifm.com.

1

1

1

3

2

38

Continuous position feedback of rising stem valvesThe efector valvis rising stem valve position sensor is an innovative solution forindicating the position of linear valves. The sensor continuously detects the positionof rising stem valves with a stroke of up to 80mm.

The sensor is placed on top of the the valve stem with an adapter. Using the sen-sor’s pushbutton setup, the open and closed positions of the valve are established.The sensor indicates three key positions of the valve: valve open, valve closed andany intermediate position, e.g., seat lift. efector valvis sends this information to a controller.

The efector valvis sensor reliably detects the position of the stem at a resolution of0.2mm and eliminates all mechanical adjustments and significantly reduces setuptime of a valve.

Single seat and double seat valvesFor double seat valves, efector valvis detects theopen, closed and seat lift cleaning position. For single seat valves, the sensor detects the open andclosed positions and provides an additional outputfor seal contact wear.

Continuous position feedback for risingstem valves up to 80 mm

Analog or three switching outputs: open,closed, and seat lift / seal wear

Resolution of 0.2 mm across the entiremeasuring range

Simple pushbutton setup and LEDfeedback

Permanent valve monitoring for predictivemaintenance


www.ifm.com

efector valvis provides continuous feedback ofrising stem valve position.

The sensor eliminates adjustmentsand the need to mount multiplesensors. Switchpoints are taughtvia the pushbutton setup.

Rising stem valve sensors

39

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • Rising stem valve position sensors

Type Dimensions

[mm]

MeasuringDistance

[mm]

Resolution

(mm)


[V]

Protection Max LoadCurrent

[mA]

PartNo.

0.3 m cable with M12 connector · 3 x N.O. PNP

65 x 52 x 110 0...80 0.2 PA (polyamide) 18...36 DC IP65 / IP67 100 IX 5010

2 m cable · Analog output, 1...5 VDC

67.5 x 43 x 110 0...80 0.2 PA (polyamide) 18...36 DC IP65 / IP67 – IX 5002

0.3 m cable with M12 connector · AS-i connection · 3 inputs

65 x 52 x 100 0...80 0.2 PA (polyamide) 26.5...31.6 DC IP65 / IP67 – IX 5030

www.ifm.com

Accessories

Type Mounting Adapters

PartNo.

Mounting adapter for Alfa Laval valves

E 11900

Mounting adapter for Südmo valves

Housing Material

Adapter: PA Target: stainless steel

316L / 1.4404

Adapter: PA Target: stainless steel

316L / 1.4404E 11989

Cordsets for IX 5010


M12 Micro DC, (5-pin), 5 m, PVC EVT 010






For additional mounting adapters, please call 800-441-8246. Cordsets for IX 5002







40

Ideal for inspection and error-proofingapplications with regular and definedshapes and contours

Reliable inspection testing throughout the production process

CMOS image element and powerfuldigital signal processor

Robust housing for use in industrialenvironments

Easy application Setup Wizard offers step-by-step instruction with advancedfunctionality

Vision sensors

efector dualis Contour Sensors

Contour Sensor

The Contour Sensor can easily differentiate between the twoparts because the shape of thetwo parts are very different.

efector dualis Contour Sensor is agood solution to maintain qualitycontrol.

The Contour Sensor can identify an incorrect part by matchingthe contour of the reference part.

efector dualis Contour Sensor

ifm’s Contour Sensor has the ability to analyze shapes and capture thecontour of an object. It is ideal in applications where the object’s shape isrepeatable and defined.

Good part / bad part

Good part Bad part

O2Dxxx sen-sors (pages40, 41) ana-lyze the edgesof an objectFunctionality

O2Vxxx sen-sors (pages42, 43) ana-lyze the areaof an object

Patternmatching

Shape detection

Orientation

Object position

Object counting

Sorting

Object area

Inner /Outer radius

Object width/height

Roundness / Rectangularity

Hole counting

Object contrast

√

√

√

√ √

√

√

√

√

√

√

√

√

√

12

3

A BC

41www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Vision sensors

DC • efector dualis Contour Sensor

Type Process Interface

Typeof Light

LED

Maximum Fieldof View Size

[mm]

DetectionRate[Hz]

Motion Speed(Maximum)

[m/s]

PartNo.

8-pin · M12 connector

Ethernet TCP / Ethernet IPinfrared 400 x 300 20 1 O2D 224






Optional backlight • PUR cable 0.15 m with 4-pin M12 connector

infrared 25 x 2534.4 x 66.5 x 9.2 O2D 906

infrared 50 x 5081 x 103 x 9.8 O2D 907

infrared 100 x 100133 x 156 x 9.8 O2D 908

TransistorOutputs(up to 5)

Type Type of Light LED

Illuminated Area[mm]

Dimensions

[mm]

PartNo.

PNP

PNP

PNP

NPN

NPN

NPN

Accessories




Plastic lens for diffusing light E 21165

M12 Micro DC (8-pin) 2 m, PUR E 11231






Cordsets

Parameter setting cable, 2 m, M12 D-coded / RJ45, cross-link

E 11898


E 18422


E 18423

Mounting set, high-grade stainless steel, 100 mm rod

U 60042

Mounting set, high-grade stainless steel, 100 mm rod and rail mount cube

U 60043

M12 Micro DC (4-pin) 5 m, PVC EVT 001

M12 Micro DC (4-pin) 10 m, PVC

For backlight

EVT 002

42 www.ifm.com

Ideal for inspection and error-proofingapplications with irregularly shapedobjects

Reliable inspection testing throughout the production process

CMOS image element and powerfuldigital signal processor

Robust housing for use in industrialenvironments

Easy application Setup Wizard offers step-by-step instruction with advancedfunctionality

Vision sensors

efector dualis Pixel Counter

Pixel Counter

The Pixel Counter is a good fit in this application because the sizeand shape of the mark can vary.

A mark is used to identify parts thathave been through the manufactur-ing process. Without the mark, theparts go into quarantine, where everyunit must be manually sorted.

ifm's Pixel Counter is able to identifythat the mark is present regardless ofthe shape or size of the part, eliminat-ing the quarantine process.

efector dualis Pixel Counter

ifm’s Pixel Counter analyzes the area of an object and counts the pixels. It is ideal in applications where the object’s shape, size or color is irregular.

Mark present / mark missing

Mark present Mark missing

O2Dxxx sen-sors (pages40, 41) ana-lyze the edgesof an objectFunctionality

O2Vxxx sen-sors (pages42, 43) ana-lyze the areaof an object

Patternmatching

Shape detection

Orientation

Object position

Object counting

Sorting

Object area

Inner /Outer radius

Object width/ height

Roundness / Rectangularity

Hole counting

Object contrast

√

√

√

√ √

√

√

√

√

√

√

√

√

√

12

3

A BC

43www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Vision sensors

DC • efector dualis Pixel Counter

Type Process Interface

Typeof Light

LED

Maximum Fieldof View Size

[mm]

DetectionRate[Hz]

Motion Speed(Maximum)

[m/s]

PartNo.


Ethernet TCP / Ethernet IPwhite 400 x 300 20 1 O2V 104



Optional backlight • PUR cable 0.15 m with 4-pin M12 connector

infrared 25 x 2534.4 x 66.5 x 9.2 O2D 906

infrared 50 x 5081 x 103 x 9.8 O2D 907

infrared 100 x 100133 x 156 x 9.8 O2D 908

TransistorOutputs(up to 5)

Type Type of Light LED

Illuminated Area[mm]

Dimensions

[mm]

PartNo.

PNP

PNP

PNP

Accessories











Cordsets


E 11898


E 18422


E 18423


U 60042


U 60043

M12 Micro DC (4-pin) 5 m, PVC EVT 001

M12 Micro DC (4-pin) 10 m, PVC

For backlight

EVT 002

44 www.ifm.com

Potatoes in 3D

First industrial 3D level sensor that evaluates volume of food product

Accurately detects food level in bins andhoppers and on vibratory conveyors

Ideal alternative to point-level sensorsthat monitor only one point of reference

Sensor withstands harsh indoor andoutdoor environments

Provides switching and analog outputs forapplication versatility

Compact sensor uses reliable time-of-flight distance measurement

Vision sensors

Solution: ifm’s Level Sensor uses an arrayof sensing elements to indicate true level

ifm’s O3D Level Sensor monitors the entire area of a hopper. The sensor then averages outthe “hills and valleys” to provide an accurate indication of level.

Challenge: point level is not an indicationof true level

Ultrasonic or optical point level sensors monitoronly a single point versus an entire area. When“hills and valleys” are present in the product,accurate level is not actually indicated.

The right level measurement can help you improve your food processingoperation with higher accuracy and better efficiencyThe O3D Level Sensor is designed to evaluate the volume and level of product infood processing applications. A common challenge in many food processing applications is determining the accurate level of food in a hopper due to “hills andvalleys” that are created by shifting product. The compact, easy-to-use O3D LevelSensor can view an entire area of food product to determine its overall volume.

Bread baking

The O3D Level sensorcan detect if bread pansare underfilled oroverfilled for properfood production.

Raw materials in feeders/conveyors

The O3D Level Sensorcan detect raw materialsin feeders and on vibra-tory conveyors. The sen-sor can be used bothindoors and outdoorswith no impact fromexternal ambient light.

O3D Level Sensor offer solutions totypical food processing applications

O3D level sensor

45www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Vision sensors

DC • 3D level sensor

Type OperatingPrinciple

Resolution

[pixels]

Angle of Aperture(Horizontal x Vertical)

[°]

Lighting Max.SamplingRate [Hz]

SupplyVoltage

[V]

PartNo.


Time-of-flight distancemeasurement and

photonic mixer devicetechnology

Dimensions

[mm]

137 x 75 x 95 64 x 48 30° x 40° Infrared LED 20 24 DC O3D 200

Accessories


Mounting set for rod mounting Ø 12 mm

E3D 103

Cordsets








ifm’s O3D Level Sensor can improve uptime throughout the food production process

Level of food on a conveyor The volume ofdelicate food, suchas potato chips, can become tooconcentrated onone area of theconveyor and begin to break.

Bulk level ofgrains andpowdersGrains and powderscan shift within thebin creating hillsand valleys, leadingto inaccurate leveldetection.

Contents in a box In fast packagingapplications, a boxof bottles only partially filled cango undetected.

View level in 3DThe 3D Level sensorcan help maintainan even distributionof product on avibratory conveyor.Monitoring in realtime, the sensor willhelp to preventfood breakage andoverflows.

View level in 3DThe sensor’s pixelarray spreads acrossthe grain to detect theentire area. The highand low points areidentified and can beused for direct outputor averaged to providea more accurate levelof available space.

View contents in 3DThe O3D sensorevaluates the entirecontents of a box and sends an alarmoutput based onpackaging errors.

Mounting rod, 200 mm, Ø 14 mm, M10 thread, stainless steel

E 21228


E 11898


E 18422


E 18423

46

Does not require a special key or codedmagnet for a target

High tolerance to misalignment and nuisance tripping

Multi-function safety relay compatiblewith industry-standard safety devices

Self-monitoring circuit verifies that thesensor is functioning correctly

Rated up to SIL 2 or SIL 3 according to IEC 61508

Safety technology

www.ifm.com

ifm solution:Setup is fast. ifminductive non-contactfail-safe sensors donot require codedmagnets or keys.

Challenge:2-piece interlockingmechanical switch isprone to misalignmentand time-consumingsetup.

Fail-safe sensors for series connectionUp to 10 non-contact, fail-safe sensors can be connected in a series with the ifmclocked input versions. Ideal for monitoring multiple stations, such as robotics cells,the fail-safe sensors will provide an output if one point along chain is stopped.Using ifm’s quick disconnect T-piece connectors, wiring is greatly reduced.

Single connection Series connection (up to 10 sensors)

ifm’s fail-safe sensors are a better alternative

Non-contact, fail-safe inductive sensors for safety applications

ifm’s non-contact fail-safe sensors incorporateinductive technology that detects standard metaltarget material such as stainless or mild steel.Coded magnets or mechanical keys are notrequired as targets, greatly reducing installationtime and avoiding misalignment issues andnuisance tripping. The sensors continuouslymonitor the sensing window for target positionand dwell time. ifm’s non-contact fail-safe sen-sors may be used with any standard safety relay,safety PLC and bus system.

Safety relay Safety sensor Safety relay Safety sensors

Inductive safety sensors

Nospecial

key

Nospecial

key

47

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Safety technology

DC • Inductive sensors for safety-related applications

www.ifm.com

Non-contact, fail-safe inductive sensors for safety applications · 2 x PNP output (OSSD)· M12 connector

Fail-Safe sensors for series connection – for connection to ifm safety relays or Safety at Work · M12 connector

Multi-function safety relays reduce stock levels

Housing Dimensions Enable Zone[mm]

PartNo.

M12 x 70 mm 0.5…4 nf GF 711S

Approval

SIL 2, PL d

Response Time on Removal

≤ 1 ms

Response Time on Approach

≤ 1 ms

ProtectionRating

IP67

HousingMaterial

316 S.S., PBT

M18 x 71 mm 1…8 nf GG 711SSIL 2, PL d ≤ 1 ms ≤ 1 ms IP67 316 S.S., PBT

M18 x 71 mm 1…5 f GG 712SSIL 2, PL d ≤ 1 ms ≤ 1 ms IP67 Plated brass, PBT

M30 x 80 mm 6…12 nf GI 701SSIL 3, PL e < 50 ms < 200 ms IP69K 316 S.S., PBT

M30 x 70 mm 1...15 nf GI 711SSIL 2, PL d ≤ 10 ms ≤ 1 ms IP67 316 S.S., PBT

M30 x 70 mm 1...10 f GI 712SSIL 2, PL d ≤ 10 ms ≤ 1 ms IP67 Plated brass, PBT

40 x 40 x 66mm 10…15 nf GM 701SSIL 3, PL e < 50 ms < 200 ms IP67 PPE, diecast zinc


M18 x 91 mm 3…6 nf GG 505SSIL 3, PL e < 20 ms < 200 ms IP69K 316 S.S., PBT

M18 x 91 mm 1…4 f GG 507SSIL 3, PL e < 20 ms < 200 ms IP69K Plated brass, PBT

M30 x 80 mm 6...12 nf GI 505SSIL 3, PL e < 20 ms < 200 ms IP69K 316 S.S., PEEK



Accessories

Housing Description Part No.

AS-i SAW ClassicLine evaluation module AC 016S

T-piece for series connection E 11569

Cordsets

ifm’s multi-functional safety relays are compatible with industry standard safety devices. The versatile safetyrelays connect single or dual channel emergency stops, mechanical safety switches, transistor-based safetydevices, light curtains, two-hand controls and ifm’s non-contact safety sensors. All of these devices can bemonitored with one relay. The benefit is a large reduction in stock levels that eliminates the need for differenttypes of safety relays for various applications. Dual channel safety devices can be configured to monitorsimultaneous logic and cross fault detection across the inputs.

Type PartNo.

Dimensions Supply Voltage

Safety Outputs

Auxiliary Outputs

G 1501S100 x 25 x 105mm 19.2…30 V DC 2 x N.O. contacts 1 N.O. transistor output (PNP)

G 1502S114 x 25 x 105mm 19.2…30 V DC2 x N.O. contacts with delay

3 x N.O. contacts

1 N.O. contact1 N.C. contact

1 N.O. transistor output (PNP)

G 1503S100 x 25 x 105mm 19.2…30 V DC 2 x N.O. transistor outputs (PNP) 1 N.O. transistor output (PNP)








48

Safety technology

www.ifm.com

Type 2 and Type 4 safety light curtains and grids according to IEC 61496

Compact 28 x 30 mm housing profile forless intrusive mounting

Up to 12 meter sensing range – no software required

Light curtains offer protected heights of 160 mm to 1510 mm in intervals of 150 mm

Light grids available in 2-, 3- and 4-beamversions

Curtains and grids help to protect plant personnel

Low profile, robust housing

Point of operationguardingLIght curtains help pro-tect an operator fromthe hazards associatedwith material position-ing such as mechanicalpower presses.

Compact 28 x 30 mmhousing profile

Curtain heights from160 to 1510 mm

Up to 12 metersensing range

Light grids availablein 2-, 3- and 4-beamversions

Highly visible LEDs forsetup and statusindication

Integrated T-slotmounting, hardwareincluded

Industry standardM12 connector

Perimeter guarding

Light curtains can beplaced along the floor todetect foot traffic. Thelight curtains send analarm when a passerbypenetrates the perimeterof a hazardous zone.

Access prevention

ifm’s light grids can beused to detect thepresence of personneland signal the machinecontroller to stop whilepersonnel are presentwithin the area.

Application solutions

ifm's safety light curtains and grids provide an optical solution for protecting plantpersonnel in unsafe work areas. Unlike mechanical options such as safety gates andpull-back restraints, ifm's hands-free solution eliminates excessive handling whenentering hazardous areas and using equipment.

ifm’s safety light curtains and grids consist of an emitter and receiver pair that createa multi-beam barrier of infrared light in front of, or around, a hazardous area. Whenany of the beams are blocked by intrusion in the sensing field, the light curtainsends a signal to the machine’s e-stop.

Safety light curtains

49

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Safety technology

www.ifm.com

Safety rating: type 2 / SIL 2 · Protected area width 0…4 m / 3…12 m

Resolution Part No.(pair)

Safety light curtains for hand protection

Safety light curtains / body, body parts protection

30 mm

40 mm

Protected Area Height*

OY 034S

OY 054S

OY 074S

OY 094S

610 mm

OY 036S

OY 056S

OY 076S

OY 096S

910 mm

OY 038S

OY 058S

OY 078S

OY 098S

1210 mm

610 mm

910 mm

1210 mm

Resolution Protected Area Height*


Part No.(pair)






Part No.(pair)

OY 044S

OY 064S

OY 084S

OY 104S

OY 046S

OY 066S

OY 086S

OY 106S

OY 048S

OY 068S

OY 088S

OY 108S

50 mm

90 mm

610 mm

910 mm

1210 mm

610 mm

910 mm

1210 mm

50 mm

90 mm

610 mm

910 mm

1210 mm

610 mm

910 mm

1210 mm

30 mm

40 mm

610 mm

910 mm

1210 mm

610 mm

910 mm

1210 mm

Safety light grids / body protection

OY 111S

OY 112S

OY 113S

Part No.(pair)


Noof

Beams

Protected AreaHeight

510 mm

810 mm

910 mm

Distance Between Beams

500 mm

400 mm

300 mm

2

3

4

OY 114S

OY 115S

OY 116S

Part No.(pair)

Noof

Beams


510 mm

810 mm

910 mm


500 mm

400 mm

300 mm

2

3

4



Safety light curtains / body, body parts protection


*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights

*Also available: 310, 460, 760, 1060, 1360, 1510 mm heights

*Also available: 760, 1060, 1360, 1510 mm heights

*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights

*Also available: 310, 460, 760, 1060, 1360, 1510 mm heights

*Also available: 760, 1060, 1360, 1510 mm heights

Cordsets for transmitters







Cordsets for receivers

Can’t find the right Light Curtain for your application, call 800-441-8246 or visit www.ifm.com.







50

Safety technology

www.ifm.com

Safety light curtains and grids withintegrated IP69K enclosure

Resistant to steam and high pressurecleanings

SIL to IEC 61508 and PL to ISO 13849

Both Type 2 / SIL 2 and Type 4 / SIL 3versions available

Up to 15 meter protected width

IP69K safety light curtains forwashdown conditions

ifm introduces a new line of safety light curtains and light grids that are ratedIP69K for washdown environments.

ifm's safety light curtains and grids can provide a protective optical barrierbetween plant personnel and unsafe equipment and dangerous areas. Thecurtains and grids can be used for perimeter guarding, access preventionand point-of-operation guarding.

Housed in a robust PMMA transparent tubing, ifm's safety light curtains andgrids carry an enclosure rating of IP69K and are resistant to high pressurecleaning and steam.

• A heater element coupled with sealing O-rings preventmoisture build-up inside the tubing

• Highly-visible LEDs provide status, setup andtroubleshooting indication

• Mounting is simple using the integrated tabs

• Light curtains are shipped fully assembled, reducing total installation costs

For application flexibility, safety light curtains are available with 14 mm or 30mm resolution and light grids with 2-, 3- or 4-beams.

Sanitary and robust design for food and beverage applications

ifm safety light curtains are housed in a trans-parent PMMA tubing to resist high pressurecleanings.

51

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Safety technology

www.ifm.com



Safety light curtains for finger protection


14 mm

Protected Area Height

OY 403S

OY 434S

460 mm

OY 405S

OY 436S

760 mm

OY 407S

OY 438S

1060 mm






Part No.(pair)

OY 444S

OY 446S

OY 448S

30 mm

610 mm

910 mm

1210 mm

30 mm

610 mm

910 mm

1210 mm


OY 411S

OY 412S

OY 413S

Part No.(pair)


Noof

Beams


510 mm

810 mm

910 mm


500 mm

400 mm

300 mm

2

3

4

OY 421S

OY 422S

OY 423S

Part No.(pair)

Noof

Beams


510 mm

810 mm

910 mm


500 mm

400 mm

300 mm

2

3

4




*Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights *Also available: 160, 310, 460, 760, 1060, 1360, 1510 mm heights

Can’t find the right Light Curtain for your application, call 800-441-8246 or visit www.ifm.com

Compact housing, robust design

ifm offers a variety of safety lightcurtains and grids for finger, handand body protection.

Compact 56 mmdiameter housingprofile

Front view Side view

Protected area heights from 160 to 1510 mm

Up to 15 meter protected area width

PMMA transparentprotective tubing

Highly visible LEDs for setup and statusindication

Integrated tabssimplify mounting

Sealing O-ring

IP69K rated enclosure

6 m PVC cable

Heater element prevents moisturebuild-up inside lightcurtain protectivetubing

52

316 stainless steel housing designed forsanitary applications such as tank leveland line pressure

2-wire transmitter simplifies wiring andeasily retrofits existing applications

Completely-welded housing preventsingress from cleaning agents andwithstands washdown conditions

Programmable switching and analogoutputs with 4-digit numeric display thatcan be parameterized and mounted in lessthan 10 minutesifm’s process adapters feature options forEPDM, PEEK and Viton sealing

Pressure transmitter with 100% stainless steel housing resists liquid ingressThe PI Series pressure transmitter line features a 316 stainless steel housingdesigned for sanitary applications such as tank level and line pressure.

The completely-welded housing prevents ingress from aggressive cleaning agentsand withstands harsh washdown conditions. The transmitter’s vent design incorpo-rates a Gore-Tex® diaphragm that resists oil ingress.

Multiple process fittings for versatilityFor application versatility, multiple process fittings can be used. ifm’s Tri-clamp®

adapters feature PEEK and Viton sealing for food and beverage applications.

PEEK and Viton offer long-term sealing and are resistant to swelling and harshchemicals. The pressure transmitter provides a high overall accuracy of ±0.2%.

Outputs include switching and analog or dual switching that are selectable throughthe programming menu.

Pressure transmitters

www.ifm.com

Multiple sanitary mounting options

ifm sanitary transmitters connect to industry standardadapters and fittings.

The PI2 Series sanitary transmitters monitorline pressure. These units incorporate a ceramic sensing element that can withstandpressure spikes that typically occur with quickclosing valves.

2-wire all stainless steel pressure transmitters

53

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • All stainless steel pressure transmitters • Analog and switching outputs

Type Overpressure /Burst Pressure

[psi]

Scalable Analog Start Point*

[psi]

Scalable AnalogEnd Point*

[psi]

Display Units Available

[psi]

Supply Voltage

[V]

PartNo.

M12 connector · Output: PNP/NPN switching and 4…20 mA / 20…4 mA scalable analog Medium temperature range: -13…257 °F / -25…125 °C (293 °F / 145 °C max 1 hr.)

58 / 435 -2…30 inH2O 8…40 inH2O inH2O, mbar, kPa, mmWS, % 18…32 DC PI 2789

1450 / 5070 -14.4…271.8 76.2…362.7 psi, bar, mPa, % 18…32 DC PI 2793

725 / 2175 -14.5…108.7 21.8…145.0 psi, bar, mPa, % 18…32 DC PI 2794

435 / 1450 -14.5…43.5 0…58.0 psi, bar, kPa, % 18…32 DC PI 2795

290 / 725 -1.8…27.3 7.3…36.3 psi, bar, kPa, inH2O, mWS, % 18…32 DC PI 2796

145 / 435 -0.73…10.88 2.90…14.5 psi, mbar, kPa, inH2O, mWS, % 18…32 DC PI 2797

145 / 435 -5.0…75.2 inH2O 20.1…100.4 inH2O inH2O, mbar, kPa, mmWS, % 18…32 DC PI 2798

145 / 435

MeasuringRange[psi]

-2…40 inH2O

-14.4…362.7

-14.5…145.0

-14.5…58.0

-1.8…36.3

-0.73…14.5

-5…100 inH2O

-14.5…14.5 -14.5…7.25 -7.25…14.5 psi, mbar, kPa, inH2O, mWS, % 18…32 DC PI 2799

www.ifm.com

Accessories


1.5” Tri-clamp® adapter with EPDM O-ring E 33208

2” Tri-clamp® adapter with EPDM O-ring E 33209

Weldable adapter with EPDM O-ring E 30130

Cordsets

* Analog scaling turndown: 4:1

For fittings other than Tri-clamp®, please call 1-800-441-8246.

Replacement Viton O-ring E 30123

Replacement EPDM O-ring,5 pieces per pack

E 30054

Replacement PEEK O-ring E 30124








54

3-in-1 unit: Transmitter and switch withthe advantages of a gauge display

Gauge display indicates the current operat-ing pressure relative to the overall range

Pointer does not require damping liquid andis driven by an integrated stepper motor

Transmitter can be configured in less than 5 minutes using two optical pushbuttons

Display can be rotated 350 degrees foroptimal visibility


www.ifm.com

High protection rating (IP 69K)

LED ring indi-cates setpointand resetpointand trend display

Analog displaywith scaling inbar and psi

Digital display – brightLED display (no LCDs) Application parameters

are setup via opticaltouch-screen pushbuttons

Extended display range

Does not requiredamping liquid

If there is no power,the pointer disap-pears behind thenumeric display

Experience the best of both worlds… PG transmitter featureshighly visible gauge with the functionality of a pressure sensor

Rotatable display 350° formounting flexibility

ifm’s adapters feature PEEK and Viton sealingfor food and beverage applications. PEEK andViton offer long-term sealing and are resistantto swelling and aggressive chemicals.

Pressure transmitter with gauge display

55

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • PG series pressure transmitter • Analog and switching outputs

M12 connector · Output: PNP switching and 4...20 mA / 20...4 mA, scalable analog Medium temperature range: -13…257 °F / -25…125 °C (293 °F / 145 °C max 1 hr.)

www.ifm.com

Part No.


[psi]

DisplayUnits

Overpressure / Burst Pressure

[psi]

Extended Display Range

[psi]

Scalable Analog Start Point*

[psi]

Measuring Range[psi]

PG 2799-7.3…23 bar, psi145 / 43523 -14.5...16-14.5…14.5

PG 279376…580 bar, psi1450 / 5070580 -14.4...489-14.4…363

PG 279422…232 bar, psi725 / 2175232 -14.5...196-14.5…145

PG 27950…93 bar, psi435 / 145093 -14.5...78-14.5…58

PG 27967.3...58 bar, psi290 / 72558 -1.8...48.9-1.8…36

PG 27972.9...23 bar, psi145 / 43523 -0.7...19.6 -0.7…14.5

PG 279820...160 inH2O mbar, inH2O145 / 435160 inH2O -5...135 inH2O-5…100 inH2O

PG 27898...64 inH2O mbar, inH2O

Supply Voltage

[V]

18…32 DC

18…32 DC

18…32 DC

18…32 DC

18…32 DC

18…32 DC

18…32 DC

18…32 DC58 / 43564 inH2O -2...54 inH2O-2…40 inH2O

Required accessories

Description PartNo.

Type

Type

Cordsets





For fittings other than Tri-clamp®, please call 1-800-441-8246.



E 30054









56

Pressure sensors designed for commonhomogenizer applications

Simple pushbutton setup allows the sen-sor to be adjusted in less than 5 minutes

Each sensor has multiple outputs forflexibility

Integrated built-in display eliminates theneed for a reference gauge

Ceramic sensing element provides long-term stability of pressure measurement

Monitoring homogenizationHomogenizers are used to emulsify one liquid into another or to evenly distributesolids throughout a liquid to improve the product’s stability and other characteris-tics. In the dairy industry, milk product is pumped into a homogenizer and, undervery high pressure, pushed through small screens. This breaks up the fat globules in the milk and creates a consistent homogeneous mixture.

For repeatable process results, homogenizing pressure can be monitored andcontrolled using ifm pressure sensors designed specifically for this purpose.

PY9970 is fitted with a mounting block and diaphragm seal filled with an FDA-approved fluid. PY9000 is designed to mount with fittings already existing on the homogenizer.

Pressure sensors

www.ifm.com

ifm’s type PY pressure sensor is designed todetect the pressure in a homogenizer.

Pressure sensors for homogenizers

57

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Pressure sensors

Pressure sensors for homogenizers

Type Switchpoint Setting Range

[psi]

SupplyVoltage

[V]

Scalable AnalogStart Point*

[psi]


[psi]

Overpressure /Burst Pressure

[psi]

PartNo.

M12 connector · Output: dual PNP / NPN switching outputs or PNP / NPN switching output and 4...20 mA / 0...10 V DC scalable analog

60…5800 20…32 DC0…2320 1450…5800 8700 / 14,500 PY 9970

87…8700 20…30 DC0…3480 2175…8700 11,600 / 17,400 PY 9000

DisplayUnits

psi, bar, mPa

psi, bar, mPa

Medium Temperature

Range

14…284 °F-10…140 °C

-13…212 °F (max 293 °F for 1 hour)

-25…100 °C (max 145 °C for 1 hour)

www.ifm.com

Accessories


Protective polyurethane cover E 30006

Cordsets









58

Steam pigtail protects instruments fromfailure due to excessive temperature

Simple pushbutton setup of the sensorallows for adjustment in less than 5 minutes

Ceramic pressure sensor element is morereliable than mechanical switches

Integrated 4-digit display eliminates theneed for a reference gauge

Units available with analog and switchingoutputs for DC applications and a solidstate relay output for AC applications

Steam is used in many industrial applications for food processing, drying, buildingheating, etc. with typical saturated steam parameters of 150 psi at 350 °F. Standardpressure sensors are rated below 200 °F and sanitary pressure sensors are ratedbelow 300 °F. The steam pigtail (also known as siphon or condensate loop) iscommonly used to protect instruments from exposure to high temperature.

As steam loses heat, it condenses back into water (known as condensate). The tem-perature of the condensate is much lower than the temperature of the saturatedsteam. The geometry of the pigtail allows the steam to condense through the loopand provides an isolating temperature barrier for the sensor.

The UP0011 steam pigtail from ifm includes a 1/2” NPT male process connection forthe steam line, a manual isolation valve and a 1/4” NPT male connection to fit anyof the pressure sensors on the opposite page.

Very large temperature reductions with the pigtailThe chart at right gives an approximation of the temperature reduction when using a steampigtail. Use the following steps:

1. Find steam pressure across the bottom axis.Example shows 150 psi.

2. Go straight up on the chart to the curve forambient temperature. Example shows 80 °F.

3. Go straight across to find the estimatedtemperature at the instrument. Example shows approximately 128 °F.

Pressure sensors

www.ifm.com

Steam pigtail protects ifm pressure sensors fromhigh temperatures in steam lines.

090

100

110 50Ambienttemperaturecurves (°F)

60

70

80

90

100

°F

120

130128°F

140

150

160

170

50 100 200 300 400 500 600298 338 150

psig388 422

Saturated steam pressure (saturated temperature)

Esti

mat

edin

stru

men

tte

mpe

ratu

re(°

F)

448 470 489psig°F

Pressure sensors for steamapplications

59

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Pressure sensors

DC • PN series pressure sensors

AC • PN series pressure sensors

Type Switchpoint Setting Range

[psi]

MeasuringRange[psi]

Scalable AnalogStart Point*

[psi]


[psi]

Overpressure /Burst Pressure

[psi]

PartNo.

M12 connector · PNP / NPN switching and one 4…20 mA/0…10 V scalable analog output Medium temperature range: 18…176 °F / -25…80 °C

1/2” Micro AC connector · Solid state relay outputMedium temperature range: 18…176 °F / -25…80 °C

-11.5…362.5

4…363

-14.5…362.7 -14.5…145 76…362.51450 / 5075 PN 2223

-12.8…145

1…145

-14.5…145 -14.5…49.4 25.4…1451088 / 2175 PN 2224

Process Connection

1/4” NPT

1/4” NPT

Supply Voltage

[V]

20…30 DC

20…30 DC

-1.5…36.3

0.4…36.3

-1.45…36.3 -1.8…14.5 73…36.3290 / 725 PN 2226

-0.68…14.5

0.1…14.5

–

–

–

–

–

–

–

–

1450 / 5075

1088 / 2175

290 / 725

150 / 430

0…363

0…145

0…36.3

0…14.5


-0.74…14.5 -0.74…5.8 2.9…14.5145 / 450 PN 2227

PN 4223

PN 4224

PN 4226

PN 4227

1/4” NPT

1/4” NPT

1/4” NPT

1/4” NPT

1/4” NPT

1/4” NPT

20…30 DC

20…30 DC

90…250 AC

90…250 AC

90…250 AC

90…250 AC

www.ifm.com

Accessories


Steam pigtail, 1/2” NPT steam line connection UP 0011

Protective cover, polyurethane E 30006

Mounting clamp E10077

Cordsets

1/2” Micro AC (5-pin), 5 m, PVC (for PN4) E 18238











60

Thermal sensing principle with no movingparts is more reliable than mechanicalswitches

Versatile adapter system for various sanitary connections

LED bar graph display for flow andsetpoint

Easy pushbutton setup with flexiblemounting

Versions are available with standard NPTfittings for non-sanitary applications

Flow sensors for sanitary applicationsThe SI series flow sensors for sanitary applications are solid state alternatives tomechanical flow switches for sensing the flow rate of liquids and gases. Becausethere are no moving parts to jam or break, ifm efector flow switches eliminate themaintenance headaches of mechanical flow switches.

Switching output, mounts in processThe one-piece sensor includes an LED status display and stainless steel RTD probe in a compact unit. The probe is inserted directly into the medium. Applicationparameters are set using the microprocessor-based pushbutton setup. The sensordetects when the flow rate falls above or below the flow setpoint.

Multiple sanitary mounting optionsifm efector sanitary sensors connect to industry standard adapters and fittings. This flexibility allows the sensor to be easily installed in many different applicationsthat have various mounting requirements.

Flow sensors

www.ifm.com

SI Series sanitary flow sensors verify the returnflow in CIP systems. The 316 stainless steelsensing probe is resistant to damage fromsolids and harsh chemicals in the fluid stream.

Flow sensors

61

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Flow sensors

DC • Sanitary flow sensors for monitoring liquids and gases

Type Greatest SensitivityLiquids/Gases

[cm/s]

MediumTemperature

[°F/°C]

ResponseTime

[s]

Probe Length[in/mm]

SupplyVoltage

[V]

PartNo.

M12 connector · PNP · Output N.O./N.C. programmable

3...100 / 200...800-13…203 °F (-25...95 °C)

(284 °F / 140 °C max. 1 hr)1...100.79” (20 mm) 19...36 DC SI 6600

3...100 / 200...800-13…203 °F (-25...95 °C)

(284 °F / 140 °C max. 1 hr)1...101.50” (38 mm) 19...36 DC SI 6700

3...100 / 200...800-13…203 °F (-25...95 °C)

(284 °F / 140 °C max. 1 hr)1...102.17” (55 mm) 19...36 DC SI 6800

DC and AC • Flow sensors for monitoring liquids and gases in non-sanitary applications

Type Greatest SensitivityLiquids/Gases

[cm/s]

MediumTemperature

[°F/°C]

ResponseTime

[s]

Output SupplyVoltage

[V]

PartNo.

3...100 / 200...800-13…176 °F (-25...80 °C)

1...10PNP, N.O./N.C.programmable

19...36 DC SI 5010

3...100 / 20...800-13…176 °F (-25...80 °C)

1...10NPN, N.O./N.C.programmable

19...36 DC SI 5011

3...100 / 20...800-13…176 °F (-25...80 °C)

1...10AC relay, N.O./N.C.

programmable90...240 AC SI 5006

www.ifm.com


1.5” Tri-clamp® adapter EPDM O-ring E 33208

2” Tri-clamp® adapter EPDM O-ring E 33209

Weldable adapter EPDM O-ring E 30130

Accessories for SI 6xxx Cordsets


1/4” NPT adapter E 40106


3/4” NPT adapter U 40085

1” NPT adapter U 40080

Accessories for SI 5xxx Cordsets

For fittings other than Tri-clamp®, please call 800-441-8246.

Protective polypropylene cover E 40203

Protective cover, polypropylene E 40203

















E 30054






62

TP module turns any RTD into a program-mable analog temperature transmitter

TP available in various pre-settemperature ranges

TP offers compact size with “Lock in Place”M12 connectors

New RTDs offer one piece sanitarysolution for temperature applications

New RTDs provide excellent response timeand high precision using a Pt100, class Aelement

Temperature modules and RTDs

www.ifm.com

TP transmitter modules andRTDs with integrated Tri-clamp®

connections

TP module turns any RTD into a programmableanalog temperature transmitter

The innovative TP transmitter module with “plug and play” M12connectors solves the common installation and environmental prob-lems associated with conventional terminal chamber-head transmitters.

Error sources from screw terminals, wiring mistakes, and fluid ingressare eliminated. An integrated LED gives local indication that thetransmitter is powered and transmitting.

Completely configurableCompatible with any Pt100 or Pt1000 probe, the TP temperaturemodule verifies the type of RTD and automatically makes the correctsettings. Usable with 2, 3, or 4-wire RTDs, the TP can be scaled andoffset using ifm’s USB interface. With it’s “overmolded” construction,the TP is suitable for harsh environments allowing for use in almost any application.

New RTDs with integrated Tri-clamp® process connectionsThe TM 48xx and TM 49xx RTDs do not require a separate sanitaryprocess adapter. The one-piece RTD probe with integrated Tri-clampconnection eliminates potential septic ingress points.

ifm’s revolutionary design incorporates a very thin sensor sheath whichminimizes the amount of thermal mass separating the RTD elementfrom the process media. This innovative design results in an extremelyfast 1…3 second response speed.

The RTD probes can be used with a RTD card on a plc rack, on atemperature controller and on ifm’s TR sensors (pages 68 - 69).

Bulky traditional headtransmitters are costly

and are subject tomoisture ingress.

ifm’s compact TPtransmitter is rated to

withstand liquid ingressand provide reliable

temperature indication

Challenge Solution

TP module

RTD withintegratedTri-clampconnection

63

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Temperature modules and RTDs

Transmitter modules

Pt100 RTD probes

Type Output PartNo.

TP temperature transmitter module · Analog output

4…20 mA TP 3233

4…20 mA TP 3232

4…20 mA

SupplyVoltage

[V]

20...32 DC

20...32 DC

20...32 DC TP 3231

Factory Preset Range

0…300 °F(-18…149 °C)

-58…572 °F(-50…300 °C)

-58…302 °F(-50…150 °C)

Scalable AnalogStart Point

-58…563 °F(-50…295 °C)

-58…563 °F(-50…295 °C)

-58…563 °F(-50…295 °C)

Scalable AnalogEnd Point

-49…572 °F(-45…300 °C)

-49…572 °F(-45…300 °C)

-49…572 °F(-45…300 °C)

InSteps of

0.1 °F(0.1 °C)

4…20 mA TP 323720...32 DC32…212 °F(0…100 °C)

-58…563 °F(-50…295 °C)

-49…572 °F(-45…300 °C)

0.1 °F(0.1 °C)

0…10 V TP 923718...32 DC32…212 °F(0…100 °C)

-58…563 °F(-50…295 °C)

-49…572 °F(-45…300 °C)

0.1 °F(0.1 °C)

0.1 °F(0.1 °C)

0.1 °F(0.1 °C)

Type Process Connection

PartNo.

Pt100 RTD probes, 316L stainless steel*

1” / 1.5” Tri-Clamp® TM 4801

InsertionDepth

1.2” (30 mm)

RTD Diameter

6 mm

Temperature Range°F (°C)

-58…302 °F(-50…150 °C)

Response TimeT05 / T09 (s) **

1 / 3

1” / 1.5” Tri-Clamp® TM 48111.9” (50 mm) 6 mm-58…302 °F

(-50…150 °C)1 / 3


(-50…150 °C)1 / 3


(-50…150 °C)1 / 3

2” Tri-Clamp® TM 49011.2” (30 mm) 6 mm-58…302 °F

(-50…150 °C)1 / 3


(-50…150 °C)1 / 3


(-50…150 °C)1 / 3


(-50…150 °C)1 / 3


M12 Micro DC (4-pin), 2m, PVC EVT 043



Optional patchcords (for remote mounting)Component guide

Direct mountfor pipes and tanks

TPTransmitter

TPTransmitter

Patchcord

RTD Probe

RTD Probe

Remote mountfor pipes and tanks

A

CordsetD

A

C

B

B

* For additional RTD probes, please see page 69.** T05 / T09 is the time to reach 50% / 90% of temperature change.

B

C

A

NEW

CordsetD

Cordsets






D

D

64

Modular solution for RTD with display andswitching / transmitter output

Multiple RTD lengths for use in small pipesup to large tanks

High temperature ranges ideal for moni-toring food processing and pasteurizing

Variety of sanitary fittings and adaptersavailable

Temperature sensors

www.ifm.com

Control monitor

A

Mounting set / adapter

Pt100 RTD probe

Thermowellprocess connection

B3

C3

D3

Controlmonitor

A

Mountingset / adapter

Pt1000RTD probe

Process connection

B2

C2

D2

Controlmonitor

A

Mountingset

Pt1000 RTD probe

Process connection

B1

C1

D1

Component guides

Direct mount, fixed insertion depth for small pipes

Direct mount, variable insertion depth for pipes and tanks

Thermowell mount for large pipes and tanks

Modular approach forapplication flexibilityifm’s modular temperaturesystem allows you to specify standard compo-nents that ship from stockto create a custom solutionfor your application

Temperature sensors

Enclosure-free, local display provides temperature readingsat-a-glance.

65

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Temperature sensors

Control monitor for separate temperature sensors

Type PartNo.

Control monitor · PNP / NPN switching and 4…20 mA / 0…10 V scalable analog outputs

TR 2432

SwitchpointSetting Range

InSteps of

Scalable Analog Start Point

Scalable Analog End Point

SupplyVoltage

[V]

-40…572 °F-40…300 °C

0.1 °F0.1 °C

-40…563 °F-40…295 °C

-31…572 °F-35…300 °C

20...30 DC

www.ifm.com

Type Usable RTDLength

RTDDiameter

[mm]

TemperatureRange

Response TimeT05 / T09 *

[s]

PartNo.

Mounting sets / adapters / fittings

Mounting set for TM RTDs E 30089

A

B1

Process connections



D1 D2

Weld-in thermowell for TT1081 E 35210

Weld-in thermowell for TT2081 E 35220

D3

Mounting set for TT RTDs E 30017

Sanitary adapter for Tri-clamp® fittings E 34110

Mounting set for TT RTDs E 30017

Gasket seal fitting for thermowells E 30018

B3

Pt100 and Pt1000 RTD probes**

1.2 inch (30 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 9061

1.9 inch (50 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 0061

3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 5/14 sec TM 1061

C1

2.0 inch (50 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 0061

3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 1061

C2

3.9 inch (100 mm) 10 -40…302 °F (-40…150 °C) 1 / 3 sec TT 1081

7.9 inch (200 mm) 10

RTDElement

Pt1000

Pt1000

Pt1000

Pt1000

Pt1000

Pt100

Pt100 -40…302 °F (-40…150 °C) 1 / 3 sec TT 2081

C3

Cordsets and accessories

Protective cover E 30006

Mounting clamp for TR sensor E 10077

* T05/T09 is the time to reach 50% / 90% of temperature change.** RTD probes and patchcords on page 67 can be used with TR sensors

for remote mounting and display.

B2









66

2-wire analog output (4...20 mA)

Fully enclosed and sealed 316 stainlesssteel construction

High accuracy across Pt1000 RTD sensorelement

Wide temperature range with quickresponse time

Flexible mounting with standardTri-clamp® fittings

Compact temperature transmitter with excellent response timesThe TA series temperature transmitter offers a compact measuring system that canbe easily installed with standard Tri-clamp® and weldable fittings.

The transmitters are available with fixed 4 - 20 mA analog output and measuringranges of 32…284 °F and 14…302 °F. They feature Pt 1000 RTDs with an accuracyof better than ±0.7 °F over the entire range of the transmitter.

With its fast response time of 3 seconds, the TA Series temperature transmitter is an ideal choice for critical temperature monitoring applications.

Temperature transmitters

www.ifm.com

Bulky head-and-wellassemblies with opencavities are subject toliquid ingress and do

not have localizeddisplays.

ifm’s compact temper-ature transmitter

features a zero-leakdesign that resists

liquid ingress.

Challenge Solution


67

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • Temperature transmitters with fixed range • Self-contained

Type PartNo.

Temperature transmitter · M12 connector · Output: 4...20 mA fixed analog

TA 3430

TA 3431

www.ifm.com

Accessories


Weldable adapter E 30055

1.5” Tri-clamp® adapter E 33401

2” Tri-clamp® adapter E 33402

Cordsets

Probe Length[mm]

Temperature Range

[°F]

Dynamic ResponseT05 / T09*

[s]

87.5 32...284 1 / 3

87.5 14...302 1 / 3

ProcessConnection

G 1/2 BSPP

G 1/2 BSPP

Supply Voltage

[V]

10…30 DC

10…30 DC

*T05/T09 is the time to reach 50% / 90% of temperature change.








68

2-wire transmitter allows for easyinstallation

Scalable analog and diagnostic outputsprovide process temperature and driftwarning/alarm conditions

Variety of sanitary fittings and adaptersavailable

Dual RTD design allows for self-verifyingdrift detection

Eliminates need for regular and costlycalibration checks

Increased process safety The TAD temperature transmitter features two high-precision and stable RTD meas-uring elements that monitor the process to ensure that a developing sensor drift isdetected and reliably diagnosed. If one element fails, the process continues with the second measuring element (back-up function). Thus, no calibration is necessary.With this technology, the TAD provides long-term, highly accurate temperatureindication in sanitary applications included in food, beverage and pasteurizationprocesses.

Using configuration software, drift thresholds and parameters can be easily set.After the setpoints are established, the TAD continuously self-monitors temperaturedrift. By providing immediate temperature drift detection, cyclical monitoring is nolonger necessary.


www.ifm.com

The TAD offers a flexible mounting system thatfits a variety of sanitary process connections.

efector TAD: cost savingsup to 95%

When compared to a typicalRTD / transmitter systemthat requires regular calibra-tion (2x per year), the TAD temperature sensor providesa significant cost savingsover a five year period.

0 20 40 60 80 100

RTD/transmitter

TADsensor

Cost comparison: conventional sensor has tobe calibrated twice a year vs. TAD sensor

share of costs [%]

sensor costinstallation costcalibration cost

Self-verifying temperature transmitters

69

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


DC • Temperature transmitter with self-verifying drift detection

Type

Temperature transmitter · M12 connector · Analog and switching

www.ifm.com

Accessories



Replacement EPDM O-ring, 5 pieces per pack

E 30054




Programming device for setting drift limits and scaling analog output

E 30396


Cordsets

RTDLength[mm]

PartNo.

33 mm 3/6 sec TAD 981

TemperatureResponse of RTD

T05 / T09*

Output Scalable Analog Start

Point

-13…212 ºF(-25…100 ºC)

4…20 / 20…4 mA anddiagnostic PNP/NPN

87.5 mm 3/6 sec

18…32 DC

SupplyVoltage

[V]

18…32 DC TAD 181-13…212 ºF

(-25…100 ºC)

Scalable Analog End

Point

77…302 ºF(25…150 ºC)

77…302 ºF(25…150 ºC)

4…20 / 20…4 mA anddiagnostic PNP/NPN

* T05 / T09 is the time to reach 50% / 90% of temperature difference.

Drift DetectionSetting Range

0.4…9.0 ºF0.20…5.00 ºC

0.4…9.0 ºF0.20…5.00 ºC

InSteps of

0.1 ºF0.05 ºC

0.1 ºF0.05 ºC









70

Sanitary PEEK sensing tip with food-gradesurface finish

Ideal for sensing viscous and sticky media

High frequency capacitance technologyprovides reliable level indication

316 stainless steel body ensures chemicalcompatibility with harsh cleaning agents

Pre-adjusted for media type, no fieldadjustments necessary

No obstruction to flow path or bridgingof sensor tips

Level sensors

www.ifm.com

LMT point-level sensor ignoresfoam and deposit build-up

The LMT sensormonitors the level ofmayonnaise in acontainer using ahigh-frequencycapacitance spectrum profilingtechnology.

With a layer ofresidue left behind,the LMT can reliablydistinguish betweena full tank vs. a surface residuecoating.

Reliable point-level control solutionifm’s LMT Series point-level sensor is designed to monitor thelevel of liquids, viscous media and powders in food and bever-age applications. The sensor uses a high-frequency capacitancespectrum profiling technology to effectively eliminate challengeswith deposits, residue and foam build-up that commonly causetraditional point-level sensors to output false signals.

The LMT sensor attaches to various mounting adapters toprovide a true sanitary mounting system. Typical applicationsinclude monitoring point-level in storage tanks and protectingpumps from run-dry conditions.

Plug and play setupThe LMT sensors are factory adjusted for specific media whicheliminates sensitivity adjustments and makes installation fastand simple. A compact sensor tip makes integration simple –even in small 1” pipes.

Meets food and beverage sanitary requirementsThe sensor’s 316 stainless steel body and smooth food-gradePEEK sensing tip ensures chemical compatibility even with theharshest cleaning agents. A high protection rating of IP68/IP69Kprevents liquid ingress. Laser-etched part numbers won’t deteri-orate in high pressure cleanings.

71

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Level sensors

DC • LMT level sensor

Type

Level switch · output function N.O. / N.C. complementary · 4-wire DC PNP

www.ifm.com

Required accessory: select one adapter


Sanitary 2” Tri-clamp® adapter with leakage ports for 3A conformance

E 43312

Sanitary weldable adapter for tanks with leakage ports for 3A conformance

E 43309

Sanitary weldable adapter for pipes with leakage ports for 3A conformance

E 43310

Sanitary 1.5” Tri-clamp® adapter with leakage ports for 3A conformance

E 43311

Sanitary weldable adapter for pipes E 43301

Sanitary weldable adapter for tanks E 43300

Sanitary Varivent® DN40 (D=68) adapter E 43307

Sanitary Varivent® DN25 (D=50) adapter E 43306

G1 BSPP adapter E 43303

G3/4 BSPP adapter E 43302

G1/2 BSPP sealing plug E 43308


Cordsets

Media selection guide


PartNo.

-14.5…232 LMT 100

Maximum ProcessPressure

(psi)

Process Connection

MediumTemperature

(°F)

32…185 ºF(302 ºF for 1 hour)

G1/2 BSPP 18…30 DC

SupplyVoltage

[V]

Application

Water-based mediahigh dielectric

-14.5…232 LMT 11032…212 ºF

(302 ºF for 1 hour)G1/2 BSPP 18…30 DC

Oils, fats, bulk medialow dielectric

Medium LMT100 LMT110

Alcohol uBeer uButter uChocolate (at 40 °C) uCIP-fluid uCocoa powder uCream uDough uEgg white uEgg yolk uFat uHoney uJam uKetchup uMayonnaise uMilk uOlive oil uPepper (ground) uPowdered milk uSalt uSugar (granulated sugar) uWater (distilled) u

NEW







Actuator Sensor-interfaceoverview

www.ifm.com

AS-i is a simple solution for networking actuators and sensorsAn AS-interface network offers a simple, cost-efficientalternative to conventional cabling at the lowest level of theautomation. This network can operate directly in conjunctionwith an existing PLC or can be linked to a higher-level bussystem for low-cost remote I/O.

AS-interface is tailored to the needs of devices such assensors and actuators where low connection cost per node is critical and simplicity is essential.

Global support for AS-interfaceifm engineers can help design and implement an AS-interfacenetwork on industrial equipment. On-site technical support isavailable and application assistance is immediate by callingour technical support hotline: 800-441-8246.

Aggressive product development ifm is committed to investing in new product developmentfor AS-interface. Our goal is to improve functionality, simplifyinstallation and maintain competitive price points.

Before

Point-to-point wiring is stillthe most common wiringmethod found in industry.One cable from each deviceresults in large wire bundlesrunning through the system.Due to the sheer volume ofwires, installation time isconsiderable and trouble-shooting is complex.

After

AS-i network connects multi-ple binary devices with onlyone 2-wire cable, completelyeliminating wire bundles. Itssimple, plug-and-play wiringsupports all topologies andeliminates device profiles andexpensive hardware.

Point-to-point wiring vs. AS-i networkingIndustrial automation systems require a large amount ofcontrol devices. The number of binary actuators and sen-sors placed on a typical system has grown over the years.

Current methods for wiring include point-to-pointconnection or bus systems. However, point-to-pointwiring results in large wire bundles, and bus systems canbe too complex for networking simple binary devices.

As a solution to these challenges, ifm offers the ActuatorSensor interface (AS-i), a simple network for actuatorsand sensors. AS-i is cost-effective, easy to install, andfeatures modular components that offer designflexibility. AS-i is a complete networking solution forindustrial control applications.

The AS-i network connects hundreds of sensors on a single two-wire cable. AS-iI/O modules use quick plug-and-play functionality that simplifies installation.

ifm is an AS-interface founding memberifm efector is one of 11 founding members of the

AS-Interface Association, established in 1990. AS-i is anon-profit independent organization that is currently

supported by more than 100 vendors worldwide.

72

Industrial Ethernet (IE) is commonly applied as the networking protocol for automationand plant control. IE is well known in industry, can carry large packets of data, and isideal for HMIs, PLCs, drives, and barcode scanners.

For bit-level data such as sensors and actuators – whichaccount for 90% of devices in automation – a lower levelI/O network, such as AS-i, is better suited for these devices.

AS-i offers a better alternative to wiring bit-level devicesand is an ideal complement to Industrial Ethernet at the I/Olevel. A single Ethernet IP address can transmit up to 992I/O points. AS-i uses quick plug-and-play functionality thatsimplifies installation in the controls architecture.

Actuator Sensor-interface overview

Extremely fast system Data transfer is fast – less than 10 ms on a fully-loaded system of 248inputs and 186 outputs.

Flexible topologyAS-i supports topologies including open tree, ring, star, and trunk anddrop lines to allow maximum design freedom.

Cost effectiveSince actuators and sensors are among the least expensive devices on a network, their connecting hardware should be comparable in price.AS-i’s price-per-point is one of the best in industry.

A simple 2-wire flat cableThe normal collection of wire bundles are replaced by a single, two-wireflat cable that carries both data and power.

Modular systemAS-i’s design flexibility makes it a true plug-and-play networking system.Modular machines can be easily connected with the aid of splittermodules to form a production line.

Insulation displacementInsulation displacement technology enables fast connection to alldevices. The cable is pierced to make the electric connection andfeatures a mechanical profile to proper insure polarity.

Best fitActuator and sensor manufacturers developed AS-i for the sole purposeof connecting actuators and sensors. Every component on the networkis specially designed to fit these binary devices.

www.ifm.com

Input/output

Processing

Control

Visual

Today’s networks with Industrial Ethernet

Ethernet IPProfiNet Modbus TCP

AS-i networking

Controlroom

Industrial Ethernet and AS-i networking offer the best of both worlds

73

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Actuator Sensor-interfaceoverview

www.ifm.com

AS-i Master / GatewayControls the data transfer for the AS-i network.

AS-i Power SupplyCouples power and signal together for transmissionover the 2-wire flat cable.

Cabinet ModuleDesigned to be an inexpensive solution forconnecting control cabinet I/O to the AS-i network.

Compact Field ModuleDesigned specifically for harsh environments.

Field ModulesIP67 module features a mounting technology thatdoes not require tools for installation.

Pneumatic Output Modules4 inputs and 1 or 2 solenoid outputs integrated into one housing.

Splitter ModuleAllows for maximum flexibility in both the design and commissioning phases of a project.

AS-i system overviewAll of the components needed to create a complete AS-i system are illustrated in this overview. Because of its flexibility, an AS-i system has unlimited design capabilities.Choose from a variety of masters, I/O modules, power supplies and accessoriesdepending on your current controls platform and application environment.

Technical specifications:• 62 nodes per master

• 4I/4O maximum per node (248 inputs/248 outputs per master)

• 100m network length (up to 300m with repeaters)

• Less than 10 ms scan time on a fully loaded system (62 nodes)

1

1 2

3

2

3

4

4

5

5

6

6

7

7

74

Actuator Sensor-interface overview

www.ifm.com

Controllers and gatewaysVarious controller options are availableto fit directly to a PLC or connected tohigher-level networks such as EtherNetIP, Profibus, etc... A stand-alone optionis available that can act as a PLC.

Input/output modules I/O modules are used to connect discreteand analog devices to the AS-i network.A variety of housings are available basedon environmental conditions.

AS-i sensorsAS-i intelligent sensors can be connect-ed directly onto the network withoutthe need for an I/O module.

AccessoriesA variety of accessories are availableto help connect nodes and peripherydevices to the AS-i system. In addition,products for extending the network,diagnosing faults and addressing modules are also available.

Wiring solutionsVarious AS-i splitters and branchingmodules can be used to provide maximum flexibility when designingand commissioning a project.

Power suppliesAS-i power supplies provide power fornetwork modules and input devices.Also, 24 VDC power supplies are usedto provide power to output devices overthe AS-i network.

75

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

AS-i Controllers provide direct connectionof AS-i to DeviceNet, EtherNet/IP andProfibus

Single or dual master options available for application versatility

User-friendly display for setup anddiagnostics

AS-i Backplane Masters provideconnection of AS-i to most PLCs

AS-i can be connected to existing control platforms in two different ways:

Controls and gateway connectionIn many cases, a high level bus system is installed in the plant. These bus systemsare designed for complex controls equipment such as drives, bar code scanners, etc.These networks are not optimized for simple on/off devices, such as sensors.Therefore, an easy way to apply an AS-i network is via a gateway connection. The gateway becomes a node on the higher level bus and allows the connection of sensors and actuators at a competitive price point.

ifm's AS-i Controller-E is designed for DeviceNet and Ethernet IP networks. TheSmartLink DP is available for Profibus networks. All of ifm's controllers incorporateuser-friendly displays for setup and diagnostics and fast response of up to 992digital I/O points using version 3.0.

Backplane master connectionBackplane masters are designed to fit into a standard card slot in a PLC rack. ifm'sbackplane masters are available with single or dual master options. The dual masteris capable of communicating with 992 digital I/O points. Inputs and outputs aremapped directly to the I/O tables in the plc and programmed via the standard plcsoftware. No additional software is required.

Bus system AS-interface

www.ifm.com

Actuator Sensor Interface networks binarydevices with only one 2-wire yellow cable,completely eliminating wire bundles.

Controllers, gateways andbackplane masters

76


AS-i stand-alone controllers and gateways

AS-i backplane masters

Type Numberof AS-i Masters

ProgrammingData

Interface

PartNo.

CurrentConsumption

From AS-i [mA]

www.ifm.com

AS-i Ethernet / IP Controller-E · Full master functions · Graphic display

1 — AC 1327

2 —

Fieldbus Interface

Ethernet IP

Ethernet IP

AS-iVersion

3.0

3.0

Current ConsumptionFrom 24 V DC

[mA]

Type Numberof AS-i Masters

Application PartNo.

I/O and Configuration

< 400

< 400 AC 1337

< 10

< 10

AS-i Profinet Gateway · Full master functions · Color graphic display

1 Ethernet RJ 45 AC 1401

2 Ethernet RJ 45

Profinet

Profinet

3.0

3.0

< 500

< 500 AC 1402

< 10

< 10

SmartLink DP · AS-i gateway / Profibus DP · Full master functions · Graphic display

1 — AC 1375

2 —

Profibus DP

Profibus DP

3.0

3.0

—

< 400 AC 1376

< 200

< 10

AS-i DeviceNet Controller-E · AS-i controller with DeviceNet interface · Full master functions · Graphic display

1 — AC 1318

2 —

DeviceNet

DeviceNet

3.0

3.0

< 500

< 500 AC 1324

< 10

< 10

2AS-i master for SLC5 PLC platform U 71000248 inputs and 248 outputs. Configuration via

Allen-Bradley’s RSLogix software package.AS-i version 3.0

1AS-i master for Compactlogix and Micrologix

1500 PLC platformsU 71003

248 inputs and 248 outputs. Configuration viaAllen-Bradley’s RSLogix software package.

AS-i version 3.0

2AS-i master for Controllogix PLC platforms U 71005248 inputs and 248 outputs. Configuration via

Allen-Bradley’s RSLogix software package.AS-i version 3.0

77

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology


www.ifm.com

Couples and de-couples power and signalfor transmission over the network

Compact housing with DIN rail occupiesminimal cabinet space

High efficiency design generates less heatand eliminates external cooling

Selectable 115/230 VAC input voltagewith short circuit and overload protection

Power for the yellow AS-i cableAS-i power supplies supply all devices connected to the yellow AS-icable. These are usually modules, connected sensors and intelligent actu-ators. They provide an increased voltage of approximately 30 volts whichis converted by the modules into 24 V required for input devices.

In order to ensure the decoupling between AS-i data and the supply,only approved AS-i power supplies may be used. AS-i is an unshieldedbus system that transports data and supplies energy on the same pair ofconductors. Because the AS-i network is an unshielded system, the volt-age must not be grounded for reasons of symmetry.

Standard 24 V power supplies cannot be used instead of AS-i powersupplies for network power.

AS-i power supplies

78


Power supplies

Type Dimensions

[mm]

Output Current AS-i

[A]

PartNo.

45 x 90 x 100 0.95 AC 1220

Output Voltage AS-i

[V]

29.5…31.6 DC

Nominal Voltage

[A]

100…240 AC (± 10%)

Efficiency

[%]

η = 86

45 x 90 x 100 1.9 AC 122129.5…31.6 DC 100…240 AC (± 10%) η = 88

50 x 129 x 136 2.8 AC 123629.5…31.6 DC 100…240 AC (± 10%) η = 88

50 x 129 x 136 4 AC 124429.5…31.6 DC 100…240 AC (± 10%) η = 88

79

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Power supply

91 x 131 x 96 8 AC 121829.5…31.6 DC 115/230 AC η = 92

120 x 134 x 118 2 x 4 AC 12122x

29.5…31.6 DC115/230 AC η = 87

www.ifm.com


www.ifm.com

DIN rail mountable modules designed forcabinet or junction box applications

Removable combicon connectors includedfor easy connection to periphery devices

Low profile models available for smallenclosures

Integrated socket for easy addressing

Robust DIN rail mounting

Space-saving modules for DIN rail mountingSmartLine modules are DIN rail mountable and designed for cabinet or junction boxapplications. The 25 mm wide housing can contain up to 4 inputs and 4 outputs.

Addressing is carried out via the online addressing socket on the front panel. Theonline addressing socket allows addressing of the module before and after mount-ing. The supply voltage and the peripheral signals are connected at the top and atthe bottom by means of plug-in Combicon connectors. These can be equippedeither with screw terminals or insulation displacement terminals by the customer.

Cabinet I/O modules

80

AS-i SmartLine I/O-modules for the control cabinet

Type Dimensions

[mm]

No. ofInputs

No. / Typeof Outputs

Max. Input Currentper Module

[mA]

Output Current perChannel / Total

[A]

AS-iProfile

AS-iVersion

ExtendedAddressing

Mode

PartNo.

25 x 114 x 105 4 – 200 – S-0.A.E. 2.1 yes AC 2250

50 x 114 x 105 4 4 relay 200 6 / 6 S-7.0.E. 2.1 no AC 2258

25 x 114 x 105 – 4 PNP — 1 / 4 S-8.0.E. 2.1 no AC 2252

25 x 114 x 105 4 4 PNP 200 1 / 4 S-7.0.E. 2.1 no AC 2251

25 x 114 x 105 4 3 PNP 200 1 / 3 S-7.A.E. 2.1 yes AC 2264

25 x 114 x 105 4 4 PNP 200 1 / 4 S-7.A.7 3.0 yes AC 2267

25 x 114 x 105 4 2 relay 200 6 / 6 S-7.A.E. 2.1 yes AC 2255


81

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Description PartNo.

Addressing unit AC 1154

Cable for addressing unit E 70213

Accessories

Type

www.ifm.com

Technical SpecsOutput voltage supply AC 2267: 24 VDC power supply for inputs

and outputs

Output voltage supply other models: AS-i power supply for inputs only and 24 VDC power supply for outputs only

ProcessLine AS-i stainless steel modulesfor use in sanitary applications

Resistant to standard cleaning agents(Ecolab tested)

AS-i and 24 V supply via common M12connector

For direct use in wet areas (protectionratings IP 68 and IP 69 K)

AS-i splitters – high-grade stainless steel flat cable insulation displacementconnector suitable for field use

Designed specifically to withstand extreme environmentsThe ProcessLine I/O module housing is 316 stainless steel and can withstand bothchemical and mechanical abuse. Its round housing does not have seams or edges,which reduces deposit buildup. The module’s housing is corrosion resistant againstmost chemicals and is rated IP69K to withstand high-pressure water sprays. Themodule features 4 inputs / 3 outputs and uses an M12 process connection.

316 stainless steel T-splitter for connection to the AS-i networkThe ProcessLine T-splitter is the first AS-i splitter designed to withstand extremeenvironments. The T-Splitter is 316 stainless steel and can be mounted directly inharsh and abrasive environments. The splitter converts the yellow and black AS-i flat cables into a single 4-pin M12 connector or can be used to branch out the AS-i network. This is typically used to connect the ProcessLine I/O module to the AS-i network. The T-Splitter has a compact, space-saving design and is easilymounted with two screws.


www.ifm.com

Stainless steel field I/O modules

82


AS-i ProcessLine I/O modules for field applications

Type PartNo.

AC 2900

AC 2904

AC 2910

AC 2916

www.ifm.com

Cables and patchcords


Splitter accessories


Flat cable, AS-i and auxiliary, to 4-pin femaleM12 Micro DC connector, 316 stainless steel,

EPDM O-ringE 70354

Flat cable to 4-pin female M12 Micro DCconnector, 316 stainless steel,

EPDM O-ringE 70454

Flat cable splitter, two channel, AS-i or auxiliary,8 A current rating, 316 stainless steel,

EPDM O-ringE 70377

AS-i flat cable yellow EPR

AC 4000

AS-i flat cable for auxiliary powerblack EPR

AC 4002

AS-i flat cable, grey PVC U 71002

M12 Micro DC (5-pin), 0.3 m, PVC EVT 058

M12 Micro DC (5-pin), 0.6 m, PVC EVT 059





83

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Dimensions

[mm]

No. of Inputs

AS-iVersion

Ø137.3 x 808

passive splitter

No./Typeof Outputs

—

Max. Input Currentper Module

[mA]

—

Output Current perChannel / Total

[A]

4 / 4 —

ExtendedAddressing

Mode

—

AS-iProfile

—

Ø137.3 x 80 4 3 PNP 200 0.7 / 2.1 2.1 yesS-7.A.E.

Ø137.3 x 80 8 — 400 — 2.1 yesS-0.A.E.

Ø137.3 x 804 x

4…20 mA— — —

2.11 and3.0

noS-7.3.E.

84 www.ifm.com

Robust design and compact metal housingprovide long life and reliability

CMOS image sensor and digital signalprocessor with no moving parts

Reliably reads dot-peened, laser etchedand printed data matrix codes

Configurable four-quadrant lightingimproves readability, reduces glare

Easy application Setup Wizard offersstep-by-step instruction with advancedfunctionality

Reliable identification of data matrix and 1D codesThe ifm Multi-Code Reader is designed to read 2D data matrix codes and 1D barcodes in high speed industrial automation applications.

The versatile Multi-Code Reader can identify, verify and qualify most markingmethods including dot-peened, laser-etched and printed data matrix codes as wellas printed barcodes.

The Multi-Code Reader features a maximum speed of 7 meters/second. The unitreads three types of 2D codes: ECC200, PDF-417 and QR as well as 26 styles ofprinted barcodes.

Additional application examples

Identification systems

Laser-etched code on glass

Challenge: Laser-etchedcode on glass can bedifficult to read due tolow contrast.

Solution: ifm's Multi-Code Reader featuresintegrated lighting, aCMOS image sensor anddigital signal processorto identify and read low-contrast codes.

Printed code on plastic

Challenge: Printed code on plastic parts can wear or disintegrateover time.

Solution: The Multi-Code reader reliablydetects printed codesthat become damagedor soiled – even if up to28% of the informationis damaged.

Integrated lightingsystem can eliminateexternal lighting and reduce total installcosts.

The Multi-Code Readerfeatures a maximumspeed of 7 meters/second. The unit readsthree types of 2Dcodes: ECC200, PDF-417 and QR aswell as 26 styles ofprinted barcodes.

Multi-code readers

85www.ifm.com

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Identification systems

DC • Multi-code reader

Type Dimensions

[mm]

Maximum Field ofView Size

[mm]

Type of LightLED

Motion SpeedInt./Ext. Lighting

[m/s]

ProcessInterface

PartNo.


60 x 42 x 53.5 68 x 50 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 100

60 x 42 x 53.5 68 x 50 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 101

60 x 42 x 53.5 140 x 100 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 102

60 x 42 x 53.5 140 x 100 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 103

60 x 42 x 59 400 x 300 red light 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 104

60 x 42 x 59 400 x 300 infrared 7 Ethernet TCP/IP, EtherNet/IP, RS-232 O2I 105

Cordsets








Spot light for optional lighting enhancement.M12 connector, transmitter

red light 630 mmO2D909

Accessories





E 11898


E 18422


E 18423


U 60042


U 60043

86

efector Octavis systems monitor operating conditions of food andbeverage processing equipmentifm’s vibration monitors provide specific vibration monitoring oncomponents inside food processing equipment such as rolling elementbearings, rotational unbalances, and gear drive systems.

The system’s on-board microprocessor directly calculates the machine’svibration characteristics and compares them to the allowable limits. When the vibration levels exceed the allowable limits, the system automatically sets alarm outputs or transfers the data over an Ethernet network connection.

Innovative softwareifm’s Octavis software makes implementing acontinuous vibration monitoring solution easy.Programming is straightforward using the “wizard“guided configuration software. Analysis tools included in the programming software give users the ability to remotelyevaluate the machine’scondition. A bar graph displayprovides a quick overview of theentire machine’s operating con-ditions. The spectrum frequencyplots allow for comprehensiveanalysis, and the trend historychart plotter displays machinecondition changes over time.

Diagnostic systems

www.ifm.com

Vibration monitoring systems thatcontinuously evaluate the condition ofrotating equipment

Predictive maintenance solutions

VSE Multiplex accepts up to fouraccelerometers for vibration monitoring

Integrated memory stores vibration dataand provides historical trends

Ethernet capability simplifies data andalarm transfer

Increases food equipment uptime by con-tinuously monitoring machine condition

VSE

VSA

Configuration software

Detailed analysis

Trend history

Real-time monitoringVSA accelerometermounts remotely

VSE

87

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Diagnostic systems

www.ifm.com

Vibration diagnostic products

Type PartNo.

Switching Inputs/Outputs

DiagnosticMethod

Spectral Resolution

[Hz]

Variable

AccelerometerChannels

4 channels:1 configurable IEPE / MEMS

3 MEMS

4 channels:1 configurable IEPE / MEMS

3 MEMS

FrequencyRange [Hz]

0…10,000

0…10,000

FFT, envelope curve FFT,

trend analysis

VariableFFT, envelope

curve FFT, trend analysis

2 inputs2 outputs

VSE 002

VSE 1002 inputs

2 outputs8 configurable I/O

Multiplex control monitors

Type PartNo.

MountingThread

OperatingTemp [°C]

Housing

316 stainless steel

MeasuringRange

[g]

±25 (nominal ± 20)resolution 1.0 mg

FrequencyRange [Hz]

0…6,000 -30…125 M8 x 1.25 VSA 001

Protection

IP69K

Accelerometers

Type Description

Parameter software

PartNo.

VES 003

Ethernet cable cross - over

EC 2080

OPC server software, 25 I.P. address license(optional)

VOS 001

Required accessories Optional accessories


Magnetic mounting base for temporarymounting on flat or curved surfaces

F 90043

Glue-on base for VSA001 F 90042

Adhesive for F90042 F 90037

Conical mounting washer for VSA001(5 pack)

E 30115

Magnetic mounting base for temporarymounting on flat surfaces

UW 0004

CommunicationPort

Ethernet

Ethernet

Cordsets








88

Diagnostic sensors

Easy-to-use sensors make vibrationmonitoring simple

Vibration sensors and transmitters

Analog signal enables trending ofvibration levels

VKV sensors combine both switchingfunction and transmitter in one package

VTV transmitter is IP69K and made of 316Lstainless steel

Easy to use set-up guide makes implementing vibration monitoring straight forward

Compact vibration sensors detect changing conditions of food processingmachinery to indicate machine damageIn most food plants, every piece of equipment has its own vibration level that canchange when it experiences unusual operating conditions. These changes canindicate potential machine damage or failure.

The VK Series and VT Series vibration sensors are designed to permanently mounton a machine to continuously monitor the machine’s vibration level. By detecting vibration level changes when they first occur, these sensors can prevent food pro-cessing equipment from catastrophically failing, reduce secondary damage andeliminate expensive downtime.

The VK and VT sensors monitor vibration levels on:

• Motors• Pumps• Compressors• Fans • Centrifuges• Vibratory feeders

VK SeriesSensor

VT SeriesTransmitter

in/s mm/s

Small machines(<20hp)

Medium machines(<100hp)

Large machines withRigid foundation

Large machines withSoft foundation (isolated)

0.01 0.28

0.02 0.45

0.03 0.71

0.04 1.12

0.07 1.80

0.11 2.80

0.18 4.50

0.28 7.10

0.44 11.20

0.70 18.00

1.10 28.00

1.80 45.00

Unacceptable

Warning

Vibr

atio

nVe

loci

ty(R

MS) Satisfactory

Typical velocity damage levels

ifm’s vibration sensors andtransmitters monitor a varietyof machines in a plant. Thischart shows the typical velocitydamage level of a machine.Setting the maximum allow-able RMS velocity is based onmachine size and type. The VKand VT will provide conditionfeedback of machine vibrationlevels in your plant.

A drive motor system is monitored to protect process equipment fromexcessive vibration.

89

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Diagnostic sensors and transmitters

Vibration diagnostic products

Type PartNo.

MeasuringPrinciple

Frequency Range[Hz]

Measuring Range[mm/s]

0…25

Switching Output

1 switching output NC, PNP

Analog Output[mA]

4...20 10…1000Vibration velocity

RMSVKV 021

0…501 switching output NC, PNP 4...20 10…1000Vibration velocity

RMS

Supply Voltage

[V]

18…32 DC

18…32 DC VKV 022

0…25

MountingThreads

M8 x 1.25

M8 x 1.25

M8 x 1.25 /UNF 1/4-28

— 4...20 10…1000Vibration velocity

RMSVTV 1229.6…32 DC

Vibration switch and transmitter

Description PartNo.

Protective cover,transparent plastic

E 30094

Magnetic mounting base for temporarymounting on flat surfaces

UW 0004

Magnetic mounting base for temporarymounting on flat or curved surfaces

F 90043

Optional accessories

Type

Cordsets

VKV sensor

73 mm

Rotatable dialssetup vibrationmonitoring in5 minutes

Yellow statusLED

Green powerLED

VTV transmitter

68 mm

• Simple setup

• Can operate as a trendingtransmitter

• Easy-to-use setup guidemakes implementationsimple – no softwarerequired for configuration

• Vibration monitoring inaccordance with ISO 10816vibration standard

Glue-on base for VSA001 F 90042

Adhesive for F90042 F 90037








NEW

90

In-line flow meter monitors compressed airsystems and specialty gases (Ar, CO2, N2)

Monitors air and gas consumption to iden-tify leaks and improve energy efficiencies

Optimizes air and gas usage and improvessystem performance

Totalizer function monitors overallcompressed air and gas usage in a plant

Integrated pipe length ensures easymounting and installation

Condition monitoring

www.ifm.com/us

Compressed air and specialty gas meterefector Metris monitors compressed air and specialty gases such as argon (Ar),carbon dioxide (CO2), and nitrogen (N2) to detect leakage areas and improve energyefficiencies. Compressed gases are considered one of the most expensive sources of energy consumption in a plant. By identifying leakage areas, efector Metris can optimize compressed gas usage, improve system performance, and reduceenergy costs.

The compact sensor is fitted with an integrated pipe to ensure easy mounting andproper installation depth. The sensor’s 4-digit numeric display provides air and gasconsumption readings and features microprocessor-based pushbutton setup. Threedisplay options are available: cubic feet per minute, cubic feet per hour, and totalconsumed cubic feet. The 24 VDC unit provides switching, analog and pulse outputoptions.

Operating principleefector Metris incorporates two ceramic sensingelements that each contain a thermistor.

As one sensor element is heated, the second element isused as a reference. Power is then altered to the heaterto ensure a constant temperature difference (CTD)between the two elements.

efector metriscan be mountedin a supply pipeto monitor onemachine.

Or, mounted ina plant zone tomonitor severalmachines.

Flow meters

91

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Condition monitoring

DC • efector Metris flow meter • Switching, analog and pulse outputs

Type ProcessConnection

PressureRating[psi]

MediumTemperature

[°F]

PartNo.

efector Metris for compressed air · OUT1: PNP switching or pulse · OUT2: PNP switching or 4…20 mA scalable analog

2” NPT 232 32...140 SD 2001

1” NPT 232 32...140 SD 8001

www.ifm.com

efector Metris for specialty gases · OUT1: PNP switching or pulse · OUT2: PNP switching or 4…20 mA scalable analog

1/2” NPT 232 32...140 SD 6101

1/2” NPT 232 32...140

SupplyVoltage

[V]

19...30 DC

19...30 DC

19...30 DC

19...30 DC SD 6001

OperatingRange[scfm]

0...412

0...132

0...69.5 [Ar]

0...42.2 [CO2]

0...44

OperatingRange[scfh]

0...24,720

0...7945

0…4175 [Ar]

0…2530 [CO2]

0…2580 [N2]

0...2650

OperatingRange[scf]

0...4,294,967

0...4,294,967

0…4,000,000 [Ar]

0…4,000,000 [CO2]

0…4,000,000 [N2]

0...4,294,967

ResponseTime

< 0.1 sec

< 0.1 sec

< 0.1 sec

< 0.1 sec

0...43 [N2]


Totalizer (pulse output) display with dualswitching output

DX 2003

Analog signal display, with dual switchingoutput

DX 2012

Accessories Cordsets








92

316 stainless steel coupling nut providesexcellent corrosion resistance

Smooth, hex-shaped coupling nut cleanseasily in extreme washdowns

Cordset features EPDM O-ring, offersflexibility in wide temperature range

PVC cable jacket resists flame, heat,oxidation and moisture

Approval

Cordsets and Patchcords

www.ifm.com

M12 Micro DC cordsetsand patchcords

Lock-in-PlaceProtects O-ring

ifm has developed a complete line of M12 cordsets that provide reliable perform-ance in aggressive washdown environments. The cordsets are designed with a 316stainless steel coupling nut that offers excellent corrosion resistance and providesthe longest protection against freezing and rusting. The smooth, hexed-shapedcoupling nut cleans easily in extreme washdown conditions and withstands harshabrasives.

ecolink M12 cordsets and patchcords for demanding applications

Designed and tested for foodand beverage applications

ifm ecolink cordsets are subjected toa variety of test that ensure reliableperformance in the application. Testsinclude IP69K, pressure cleaning,thermal shock, and shock and vibration.

Cordsets for washdown environments are manu-factured with high-grade stainless steel couplingnuts, gold-plated contacts and an O-ring that iscompressed to permanently maintain its sealingfunction. These cordsets operates in a broad rangeof temperatures ranging from -20 to 105°C.

The cordset’s O-ring is manufactured withEPDM, a chemically cross-linked elastomer thatoffers excellent flexibility in fluctuating tempera-tures. EPDM provides ideal insulation resistanceand strength and offers protection in causticcleaning environments.

3

1 2

4

5

3

1 2

4

5

3

1 2

4

5

93

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

M12 Micro DC Cordsets and Patchcords

Type Face View

Max Supply

Protection ConnectorMaterials

CableLength

PartNo.

Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used

250 VAC / 300 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

PVCEPDM O-ring

316 SS coupling nut

5 M EVT 001

10 M EVT 002

25 M EVT 003

10…36 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

5 M EVT 007

10 M EVT 008

25 M EVT 009

5 M EVT 004

10 M EVT 005

25 M EVT 006

Cordsets and Patchcords

4-pin Micro DC cordsets · PVC jacket

4-pin Micro DC cordsets with 3 PNP LED · PVC jacket

3

1 2

4

5

Female

Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used

250 VAC / 300 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

Female

Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: not used3

1 2

4

5

Female

Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: gray

Pin 1: brownPin 2: whitePin 3: bluePin 4: blackPin 5: gray

250 VAC / 300 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

250 VAC / 300 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

5 M EVT 010

10 M EVT 011

25 M EVT 012

5 M EVT 013

10 M EVT 014

25 M EVT 015

5-pin Micro DC cordsets · PVC jacket

Female

Female

30 VAC / 36 VDCIP68

-25…80 °C

PURViton

Nickel platedbrass nut

2 M E 11950

5 M E 11807

10 M E 11311

2 M E 11231

5 M E 11232

10 M E 11806

8-pin Micro DC cordsets · PUR jacket · Recommended for vision sensors

4

1 2

65

378

30 VAC / 36 VDCIP67

-40…80 °C

PURViton


5 M E 12166

10 M E 12167

5 M E 12168

10 M E 12169

8-pin Micro DC cordsets · PUR jacket · Recommended for light curtains

4

1 2

65

378

250 VAC / 300 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

0.3 M EVT 040

0.6 M EVT 041

1 M EVT 042

2 M EVT 043

5 M EVT 044

4-pin Micro DC patchcords · PVC jacket

3

1 2

4

5

Female

43

2 1

Male

30 VAC / 36 VDCIP67 / IP68 / IP69k

-25…100 °CcURus

PVCEPDM O-ring

316 SS coupling nut

0.3 M EVT 058

0.6 M EVT 059

1 M EVT 060

2 M EVT 061

5 M EVT 062

5-pin Micro DC patchcords · PVC jacket

3

1 2

4

5

Female

4

2 1

35

Male

www.ifm.com

Pin 1: whitePin 2: brownPin 3: greenPin 4: yellow

Pin 5: grayPin 6: pinkPin 7: bluePin 8: red

30 VAC / 36 VDCIP67

-40…80 °C

PURViton


4

1 2

65

378

Pin 1: whitePin 2: brownPin 3: greenPin 4: yellow

Pin 5: grayPin 6: pinkPin 7: bluePin 8: red

Pin 1: brownPin 2: whitePin 3: bluePin 4: black

Pin 5: grayPin 6: pinkPin 7: lilacPin 8: orange

30 VAC / 36 VDCIP68

-25…80 °C

PURViton


4

1 2

65

378

Pin 1: brownPin 2: whitePin 3: bluePin 4: black

Pin 5: grayPin 6: pinkPin 7: lilacPin 8: orange

Why choose PVC cable material?PVC is a polyvinylchloride material that offers excellentmechanical strength and resistance to chemicals. PVC alsooffers outstanding performance in a broad range of temperature conditions and resists flame, heat, oxidation,moisture and abrasion.

Advantages of EPDM O-rings

EPDM is a chemically cross-linked elastomer with excellentflexibility at high and low temperatures. This material provides exceptional insulation and strength as well asresistance to abrasion. EPDM is particularly suited for thecaustic-cleaning environment found in the food and beverage industry.

316 stainless steel coupling nuts are highly compatible with the food and beverage industry 316 stainless steel offers excellent corrosion resistance which is necessary in the food and beverage industry. Stainless steel offers the longest protection against freezing and rusting. The smooth externalhexed-shaped coupling nut aids in the cleaning process and withstands harsh abrasion.

94

Industry standard color coding for foodand beverage applications

Vibration resistant coupling nut withstandsshock and vibration environments

EPDM O-ring offers excellent flexibility athigh and low temperatures

Low-resistance contact design withgold plated contacts

Available with PVC cable and 316stainless steel coupling nut

Cordsets

www.ifm.com

Micro AC and Mini AC Cordsets

BROA

D

Operating

BROA

D

Operating ®®

Rugged Micro AC and Mini AC cordsets are designed for food andbeverage applications

32

5 1

4

3

1

2

95

Company

Positionsensors

Vision sensors

Safetytechnology

Processsensors

Industrialnetworks



Wiring technology

Micro AC Cordsets

Type Face View

Max Supply


CableLength

PartNo.

Mini AC Cordsets

Type Face View

Max Supply


CableLength

PartNo.

Pin 1: greenPin 2: red/blackPin 3: red/white

300 VAC / VDCIP68

-10…100°CcULus

PVCEPDM

316 stainless steel

5 M E 18206

10 M E 18207

25 M E 18208

5 M E 18209

10 M E 18210

25 M E 18211

Cordsets

3-pin · 1/2” Micro AC cordsets · PVC jacket

Female

3

1

2 Pin 1: greenPin 2: red/blackPin 3: red/white

300 VAC / VDCIP68

-10…100°CcULus

PVCEPDM

316 stainless steel

Female

Pin 1: whitePin 2: redPin 3: greenPin 4: orangePin 5: black

300 VAC/VDCIP68

-20…105°CcURus

PVCEPDM

316 stainless steel

2 M E 18042

4 M E 18043

6 M E 18044

5-pin · 7/8” Mini AC cordsets · PVC jacket

2

5 1

43

Female

Pin 1: red/whitePin 2: redPin 3: greenPin 4: red/yellowPin 5: red/black

250 VAC / VDC IP68PVC

EPDM 316 stainless steel

5 M E 18238

10 M E 18239

5 M E 18240

10 M E 18241

5-pin · 1/2” Micro AC cordsets · PVC jacket

www.ifm.com

Female

32

5 1

4

Pin 1: red/whitePin 2: redPin 3: greenPin 4: red/yellowPin 5: red/black

250 VAC / VDC IP68PVC

EPDM 316 stainless steel

Female

96

Business policies

Position sensors – Five year limited warranty

ifm efector warrants that its position control sensors, i.e. proximity switches and photoelectric sensors, will be free from defects in materials and workmanship for five years, and ifm efector will repair or replace anyproximity switch which is found to be defective within five years of shipment and which is returned to us, shipping prepaid, within one year after the defect is discovered.

This warranty is in lieu of and excluding any implied warranty of merchantability or fitness for a particularpurpose and this remedy is the exclusive remedy, as ifm efector will not be responsible for any incidental orconsequential damages.

We stand behind our productsAll ifm products are backed with the longest established warranty program in the sensor industry. ifm position sensors and fluid sensors carry a 5-year and 2-year warranty, respectively. For your convenience, a downloadable shipping form is available on our website: www.ifm.com.

Concerning safety…ifm efector makes every effort to build a dependable product, but every product will eventually fail. Therefore,your equipment must be designed to prevent property damage and personal injury if our products fail.

ifm efector products are not designed to be used as stand-alone devices to protect or guard human life or limb.

Prices F.O.B. Exton, PA. Prices and specifications subject to change without notice.

Fluid and diagnostic sensors – Two year limited warranty

ifm efector warrants that its fluid control sensors will be free from defects in materials and workmanship fortwo years, and ifm efector will repair or replace any sensor which is found to be defective within two years ofshipment and which is returned to us, shipping prepaid, within one year after the defect is discovered.

This warranty is in lieu of and excluding any implied warranty of merchantability or fitness for a particular purpose and this remedy is the exclusive remedy, as ifm efector will not be responsible for any incidental orconsequential damages.

Lit.

No.

:B2

0112

You can count on our Service Center to be a reliable partner. That means easy orderplacement and knowledgeable technicalsupport. Your time is too valuable to waste. Get to know us…

ifm efector – close to you!Call 800-441-8246 • visit www.ifm.com

Our people and our products are committed to helping you succeedin your business

Temperature sensors

Photoelectricsensors

Pressuresensors

Visionsensors

Cylinder sensors

Inductivesensors

Flow sensors

Level sensors

w w w .ifm .co m

Documents

Transcript of w w w .ifm .co m