W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen
description
Transcript of W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen
![Page 1: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/1.jpg)
WIND –2– H2OMECH 4020: Design II
Group 12: Jeffrey Allen Daniel Barker
Andrew Hildebrand Tom McDonald
Supervised by: Dr. Alex Kalamkarov Client: Dr. Graham Gagnon
1
![Page 2: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/2.jpg)
Presentation Agenda
2
• Background
• Design Overview
• Design Modifications
• Testing
• Budget
• Design Requirements
![Page 3: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/3.jpg)
Design CompetitionProject inspired by theme of 2008 Design Competition
posed by WERC: A Consortium for Environmental Education and Technology Development
Competition held at New Mexico State UniversityApril 5th – 8th
3
Competition Design ChallengeDesign a device that uses wind power
to directly power the filtration of brackish water
i.e. no generation of electricity
![Page 4: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/4.jpg)
Interdisciplinary Collaboration
Working with a team of two CivilEngineering students: Matt Follett
Dannica Switzer
Responsible for water treatment system
4
![Page 5: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/5.jpg)
5
December 2008 Design
![Page 6: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/6.jpg)
6
January 2009 Update
![Page 7: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/7.jpg)
7
Completed Windmill
![Page 8: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/8.jpg)
Design Overview
8
![Page 9: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/9.jpg)
Design Overview - Blades
9
• Clockwise rotation • Blade tip deflection• Light weight (Al 5052-H32)• Safety factor of at least 10
for centrifugal forces• Optimize performance for
low winds (3-6 m/s)• Solidity ratio of 80%• 10 degree averaged angle
of attack
![Page 10: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/10.jpg)
Design Overview – Blade Attachment
10
![Page 11: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/11.jpg)
Design Overview - Hub
11
![Page 12: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/12.jpg)
Design Overview - Gearbox
12
![Page 13: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/13.jpg)
Design Overview - Gearbox
13
• 1” diameter shafts• 1010 steel for rotor shaft,
4140 steel for geared shafts
• Maintain a safety factor of at least 5 (keyways, variable loads)
• Stress analysis - torsion, bending, buckling,
• Vibration – critical speed• Deflection – spacing
between bearings
![Page 14: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/14.jpg)
Design Overview - Gearbox
14
• System meets or exceeds ANSI B29-1 - Precision Power Transmission Roller Chains, Attachments, and Sprockets
Size Pitch, in. Roller diameter, in. Ultimate strength, lb. Working load, lb.
40 0.500" 0.312” 3,125 810
60 0.750" 0.469" 7,030 1,980
![Page 15: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/15.jpg)
Design Overview – Crank Mechanism
15
• 3 inch stroke length
• Brass bushings used to allow for relative motion between shaft and crank arm
• Cotter pins prevent crank arms from slipping off ends
![Page 16: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/16.jpg)
Design Overview – Pump Block
16
• Crank arm drives pump block up and down
• No relative motion between vertical shafts and pump block due to split pin (better for seal)
• Two ½” shafts constrain lateral motion through two brass sleeve bearings
![Page 17: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/17.jpg)
Design Overview – Yaw Bearing
17
• Lazy susan bearing rated for 1000 lbs. used to yaw the nacelle
![Page 18: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/18.jpg)
Design Overview – Pump
18
• Brass pipe with two check valves
• Leather seals provide seal between valves and pump wall
![Page 19: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/19.jpg)
Design Overview – Stand
19
• Stand inherited from Vertical Axis Wind Turbine 2005/2006
![Page 20: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/20.jpg)
Design Overview – Overspeed Protection
20
• Furling at 11 m/s
• Thrust force on blades
• Force on Tail
• Offset angles
![Page 21: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/21.jpg)
Design Modifications
21
![Page 22: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/22.jpg)
Design Iteration – Flange Thrust Bearing
22
THRUST BEARING • Added to stop pump rod from
unthreading itself during yaw motion• Transmits tension and compression along
pump rod, while providing zero torque• Consists of a rigid flanged housing
welded to the upper pump rod with two sets of tapered roller bearings press fit into it
• Lower pump rod locates onto roller bearings via a welded collar and tensioning nut
![Page 23: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/23.jpg)
Design Iteration – Brass Pressure Seal Cap
23
Design Considerations
SEAL CAP• Added to provide a pressure seal at
interface of pump rod and pump• Consists of a brass cap with pipe
threading that has seated in it a rubber wiper to prevent dirt from entering the pump, and a rubber seal
![Page 24: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/24.jpg)
Design Iteration – Stainless Steal Pump Rod
24
Design Considerations
STAINLESS STEEL PUMP ROD• Originally made of steel, which was
rusting• Replaced with a stainless steel pump rod
to resist corrosion
![Page 25: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/25.jpg)
Testing/Results
25
![Page 26: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/26.jpg)
Testing• Test #1: Point Pleasant Park
– Unstable back pressure (butterfly valve)– Wind speed ~4 m/s– Proof of concept test– No data recorded
![Page 27: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/27.jpg)
Testing• Test #2: Dalhousie Wind Tunnel Lab
– Air flow: 42” box fan– Wind speed ~4.5 m/s– Filters couldn’t handle high flow rate– Unstable back pressure (butterfly valve)– Civil students were able to reduce particulate in
sample from >6000 ppm to <150ppm97.5% particulate removed!
![Page 28: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/28.jpg)
Testing
![Page 29: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/29.jpg)
Testing• Test #3: Lawrencetown Beach
– Wind speed ~ 5.5 m/s gusting to 9 m/s– 75 psi pressure relief valve generates back
pressure– Wind speed taken every 5 seconds– Volume water taken every minute– Wind speed nearly constant over rotor face
![Page 30: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/30.jpg)
![Page 31: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/31.jpg)
![Page 32: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/32.jpg)
![Page 33: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/33.jpg)
![Page 34: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/34.jpg)
Results
• Average back pressure taken as 80 psi• Able to determine efficiency based on theoretical kinetic energy of wind flux
![Page 35: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/35.jpg)
Testing
• Optimum efficiency occurred near 4.7 m/s
![Page 36: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/36.jpg)
Testing
• RPM optimized (steepest slope) around 5.3 m/s• RPM is concave down above 5.3 m/s
![Page 37: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/37.jpg)
Testing
• Turbine performed better than anticipated• Flow rates approximately 50% higher than expected
![Page 38: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/38.jpg)
Testing• Test #4: Wind Tunnel Lab
– Three wind speeds (low, medium, high)– 30 psi relief valve added– Flow rates recorded at 0, 35, and 75 psi– Volume water taken every two minutes– Air flow highly complex, uneven over rotor face– Analogous wind speed undeterminable
![Page 39: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/39.jpg)
![Page 40: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/40.jpg)
Testing
• Curve becomes more linear as wind speed increases• Demonstrates higher flow rates at higher wind speeds
![Page 41: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/41.jpg)
Safety - Hierarchy of Control
41
![Page 42: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/42.jpg)
Budget
42
![Page 43: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/43.jpg)
Budget
43
Item Cost
Hub/Blades $ 70.00 Gearbox $ 570.00 Pump System $ 590.00 Tower $ - Tail/Furling System $ 250.00 Miscellaneous $ 320.00 Testing $ 190.00
Total $ 1,990.00
![Page 44: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/44.jpg)
Design Requirements
44
![Page 45: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/45.jpg)
Design Requirements
45
Design Requirement Met Include an over-speed control system for the turbine
to avoid catastrophic failure and ensure public safety.
YES?
Be designed for constant operation in remote areas YES Utilize pump components suitable for continuous
contact with brackish groundwater. YES
Maximize flow rate to provide the most drinking water with the least amount of wind energy. YES
Contain little to no electronic components. YES
![Page 46: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/46.jpg)
Design Requirements
46
Design Requirement Met
Be constructed of locally available and off the shelf materials. NO
Consider social implications of a wind pump installed in a remote, poor community. YES
Be able to respond to the intermittent nature of wind without interruption to the normal function of the system, i.e. no re-priming of the pump.
YES
Require minimal human attention except for construction of the unit and regular maintenance YES
![Page 47: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/47.jpg)
Design Requirements
47
Design Requirement Met
Pump water from a suitable brackish water table depth. This is the average water table depth in geographic location to be determined.
YES
Pump as much water as possible at a minimum wind speed in the range of 3-6 m/s, with the objective of being usable in remote areas with low to medium wind resource.
YES
Produce the minimum fluid pressure required for the filtration of brackish water. The design water pressure set by the civil engineering team is a minimum of 517 kPa (75 psi).
YES
![Page 48: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/48.jpg)
Acknowledgements
Dr. Joshua Leon Dr. Graham Gagnon Dr. Alexander Kalamkarov
Dr. Julio Militzer48
![Page 49: W IND –2– H 2 O MECH 4020 : Design II Group 12: Jeffrey Allen](https://reader035.fdocuments.us/reader035/viewer/2022062410/56816464550346895dd647b2/html5/thumbnails/49.jpg)
49