8/3/2019 VT-AUDIMOSTCK3100-100

1/4

1 2

AUDI TO MOST SYSTEM

VT-AUDIMOSTCK3100-100PARROT CK3100 BLUE TOOTH

TO AUDI CARS WITH MMI SYSTEM

A4, S4 2009A5,S5 2009

A6 2006-2009A8 2004-2009Q7 2007-2009

Please read this manual carefully and keep it for further reference.

Installation of this interface must be performed by qualified andexperienced installers.

Our company will not be responsible for any damage caused to the vehicleand/or its components, caused by improper installation or by the lack ofexperience of the person in charge of the installation.

Prior to installation, please check that installation complies with all currentlaws and regulations.

Our company will not be responsible for any accident caused by users notobserving current laws and regulations. Installation of this device will beperformed on the entire responsibility of the user purchasing this productand having it installed.

PLEASE PERFORM INSTALLATION WITH IGNITION OFF

MOST Interface PartsThis Interface is supplied with the Following parts you can see below.Please check that you received all necessary components.

If any part is missing, please contact your local distributor immediately.

VENTURA TECHNOLOGYSMOST INTERFACE

PARROTVT-CK3100HAR-01

HARNESS

MOST FIBER OPTICT HARNES

This Interface has been designed to be installed together with the ParrotCK3100 Hands-free kit (NOT SUPPLIED WITH THE INTERFACE). It will not

be necessary to use the Display supplied with the CK3100 kit,because the Interface allows to view all information about calls in the AudiOEM MMI Monitor.The Parrot BLUE Module and the suitable wiring will beneeded to complete the installation

CK3100 PARROTMODULE

CK3100 PARROTMICROPHONE

Copyright -200 Ventura Technology Inc. All rights reserved.2008 9

VENTURA TECHNOLOGY S.A. DE C.V.ISAAC GARZA 1549 OTE COL. CENTRO MTY. N.L. MEXICO C.P. 64000

Phone (81)8374-44-03 FAX (81)8374-44-05

U.S.A. Phone 956 238 4864www.venturatechnology.com.mx

8/3/2019 VT-AUDIMOSTCK3100-100

2/4

3

INSTALATION DIAGRAMIMPORTANT:BEFORE BEGINNING THE INSTALLATION MUST BE SURE THE CAR IS COMPLETELY OFF

WITHOUT PUTTING THE KEY.

REMOVE THE MOST CONNECTOR FORM THE BACK OF THE CD CHANGER ANDCONNECT TO THE FEMALE MOST CONNECTOR OF THE MOST HARNES OF THEINTERFACE.

CONNECT ONE OF THE MOST MALE CONNECTOR OF THE INTERFACE TO THECD CHANGER.

CONNECT THE OTHER MOST MALE CONNECTOR OF THE HARNES TO THEVENTURA TECHNOLOGY INTERFACE VT-AUDIMOSTCK3100-100.

CONNECT THE 24 PIN CONNECTOR TO THE VENTURA TECHNOLOGY INTERFACEVT-AUDIMOSTCK3100-100.

REMOVE THE CD CHANGER FROM THE CAR TO HAVE ACCESO TO THE BACKOF THE CD CHANGER TO MAKE THE NECESSARY CONNECTONS TO CONTINUEWHIT THE INSTALATION.

1

2

3

4

5

CONNECT THE 8 PIN BLACK CONNECTOR OF THE HARNES VT-CK3100HAR-01TO THE PARROT CK-3100 MODULE.

6

7CONNECT THE 4 AND 10 PIN CONNECTORS OF THE HARNESTO THE PARROT CK-3100 MODULE

VT-CK3100HAR-01

CONNECT GROUND AND 12V CONSTANT TO THE HARNES VT-CK3100HAR-01.

CONNECT THE MICROPHONE TO THE PARROT CK-3100 IN ONE PLEACE COLSETO THE DRIVER.

8

9

WHIT ALL THIS CONNECTIONS READY YOU NEED PUT THE KEY AND TURN ONTHE CAR AND BROWSE WHIT YOUR CELLPHONE ONE DEVICE AND ACTIVE DOTHE CONNECTIONWHIT THE CK-3100 LIKE THE PARROT MANUAL REQUIRES.

10

AFTER THIS YOU NEED PUSH THE TEL BOTTON ON YOUR CAR AND WAIT FOR2-5 MINUTESTO THE PARROT RECIVE ALL YOUR PHONE BOOK.

11

12

IN THIS MOMENT IS POSIBLE SEE THE INFORMATION OF THE CELLPHONE ONTHE SYSTEM AND MAKE CALLS. BE GOOD IF YOU MAKE ONE CALL TO VERIFYTHE COMPLET FUNTIONALITY OF THE SYSTEM.

13

NOW IS THE TIME TO RETURN TO PUTTING ALL COMPONENTS OF THE SYSTEMIN ITS ORIGINAL SITE. MAKE SURE ALL ARE SUBJECT TO FULLY REMOVE ANYPOSSIBILITY OF NOISE CAUSED BY THE MOVEMENT OF THE CAR.

STEP BY STEP

OEM

HARNESS

SETTING

1

2

3

4

5ON

DIP

O

EM

HARNES

OEM

HARNESS

OEM

HARNESS

USB

MOSTIN

CK3100 PARROT MODULE(NOT INCLUDED)

YELLOW WIRECONNECT TO

12V CONSTANT

BLACK WIRECONNECT TO

GROUND

MINI USB PORTFOR FUTURE UPGRADE

ALL OFF

CK3100 PARROTMICROPHONE

(NOT INCLUDED)

CONNECT TO OEMMOST DEVICE IN

FEMALE PORT

CONNECT THE OEMMOST CABLE OUT

TO THIS FEMALE PORT

BACK VIEW OF THEOEM CD CHANGER

MOST OEM CABLEFROM THE CAR TO

THE MOST FIBER OPTICCD CHANGER

MOST T HARNESSFROM THE INTERFACE

VT-CK31

00HAR-

01

1

23

4

5

6

7

89

8/3/2019 VT-AUDIMOSTCK3100-100

3/4

4 5

Phone pairing

If the Interface has not been installed yet, when pressing the OEM Callbutton, the MMI screen will show a message, saying TELEPHONE NOTCONNECTED. PLEASE CONNECT TELEPHONE.

Once the installation has been completed, when pressing the button,the message will change to Telephone disconnected or improperly hang up.

.

Then, you will need to pair the Mobile phone with the Parrot CK-3100 kit,same way it should be done on a regular Parrot installation. You will need toactivate Bluetooth function, search for the device (in this case, Parrot CK-3100)and connect

As soon as the connection between phone and kit is completed, the OnScreen Menu will change, and you will be able to view the dialling screen,with same format as the dialling screen in the Audi OEM Menu.All functions will be controlled through the MMI original knob, both toBrowne the menus and to make calls.

All the call information will be displayed in the original Audi monitor, and inthe small Combi display located in the dashboard.

System Menu

Once the phone has been paired with the Parrot kit, you will have todownload the phone book data to the kit itself, so you can view all theinformation on the screen.This process will take one or more minutes, depending on the quantity of

contacts stored in the phone book of the Mobile phone. For example, for aphone book with 200 contacts, downloading would take around 5 minutes.

You will only need to perform this task ONCE. For all future uses, theinformation will be already stored inside the kit. In case of adding newcontacts, only the new information would be downloaded, and it would notbe necessary to download the whole phone book again.

Depending on the cell phone features, it may not be possible to downloadthe phone book automatically. In this case, please proceed as follows:

-Unplug the Interface harness from the Parrot Module.-Connect the original CK3100 Display to the Parrot Module.-Download the phone book contacts MANUALLY, same way as you wouldproceed if only the Parrot kit were installed.

-Once all the contacts have been downloaded, unplug the Display and plugthe Interface harness again.

Using the MMI knob, you will be able to get access to below menu options,which have all the information downloaded from the Mobile phone:

-DIALLED NUMBERS-DIRECTORY-PHONE BOOK-RECEIVED CALLS-MISSED CALLS

By turning and pressing the knob, you will have access to the menus, beingable to choose the desired option.

The system also has a phone settings menu, where you will be able toadjust different parameters according to your needs or preferences.

8/3/2019 VT-AUDIMOSTCK3100-100

4/4

6

VERY IMPORTANT

Same as you would proceed with a Parrot Handsfree Kit, it will be necessary to make ONE CALL first, in order to be able to view all the callinformation in the OEM Screen. As soon as that call is ended, all the information will be downloaded from the cell phone to the Parrot module,then it will be displayed on the original screen and will be controlled through the OEM buttons.

DIP SWITCH Configuration

The Interface has been configurated in factory, and it is not necessary to adjust the DIP SWITCHES in any other way.

Interface updating

If the Interface needs updating at any time, please contact your local distributor, who will give you the suitable instructions on how to proceed

for the updating of the interface.