VPA 1100-5 · 2019-07-09 · Product features Innovative engineering since 1962 VPA 1100-5 For test...
2
Product features Innovative engineering since 1962 VPA 1100-5 For test of fuel injectors for all 2-stroke and 4-stroke engines, including fuel injectors with slide valves. Installed in more than 50 major workshops globally, incl. MAN, Wärtsilä, MaK and Caterpillar facilities. Fuel system maintenance Fuel Injector Test Rig ➠ PLC-controlled test device ➠ Touch panel for easy and fast operation ➠ Pre-set required values ➠ Built-in printer ➠ Test reports stored in permanent memory or transferred to PC via USB ➠ Step-by-step test procedure ➠ Pneumatically driven OBEL-P
Transcript of VPA 1100-5 · 2019-07-09 · Product features Innovative engineering since 1962 VPA 1100-5 For test...
Product features
Innovative engineering since 1962
VPA 1100-5For test of fuel injectors for all 2-stroke and 4-stroke engines, including fuel injectors with slide valves.
Installed in more than 50 major workshops globally, incl. MAN, Wärtsilä, MaK and Caterpillar facilities.
Fuel system maintenance
Fuel Injector Test Rig
➠ PLC-controlled test device➠ Touch panel for easy and fast operation➠ Pre-set required values➠ Built-in printer
➠ Test reports stored in permanent memory or transferred to PC via USB➠ Step-by-step test procedure➠ Pneumatically driven
OBEL-P
www.chris-marine.com
CHRIS-MARINE SWEDENHEADQUARTERSTel: +46 - 40 671 [email protected]
CHRIS-MARINE DENMARKTel: +45 - 4498 [email protected]
CHRIS-MARINE GERMANYTel: +49 4101 5880 [email protected]
CHRIS-MARINE SINGAPORETel: +65 - 6268 [email protected]
CHRIS-MARINE CHINATel: +86 - 21 6575 9331 [email protected]
CHRIS-MARINE JAPANTel: +81 - 78 570 5642 [email protected]
CHRIS-MARINE INDIATel: +91 - 712 224 [email protected]
CHRIS-MARINE ECUADORTel: +593 979 000 [email protected]
CHRIS-MARINE BRAZILTel: +55 21 [email protected]
Contact one of our offices to get in touch with your local agent.
Chris-Marine Headquartersand Subsidiaries
VPA 1100-5
Technical specifications• For MAN slide valves Yes
• Suitable for all kind of 2-stroke engines Yes
• Suitable for all kind of 4-stroke engines Yes
• Test procedure − Opening pressure test− Back leakage time− Atomizing test− O-ring seal test− Venting function− Test passed or not
• Pressure (bar) Output @ Input
0-1100@100-800@7
• Air consumption depending on output pressure
2000 l/min
• Pneumatic inlet 1/2" BSP claw clutch female
• Hydraulic outlet 1/4" BSP male coupling
• Weight 200 kg
• Dimensions (LxWxH) 930 x 540 x 1480 mm
• Electric power supply 1-phase 208-230 V AC, 50-60 Hz
PLC System➠Full documentation for all test procedures
➠Keep history log of each unique injector
➠Enclose documents for customers
➠Max. and min. values to determine whether an injector passed a test or failed
Optional Accessories
UVH - Universal valve holder incl. oil mist separator and universal connectors for all common 4-stroke injectors
MPT - Multi-purpose Trigger unit for activation of electronic fuel injectors
H01
6-17
51/E
BK
M R
ekla
m A
B
OBEL-P
