Votive candle making machine

From: Xuguan

www.xuguan.net

xuguan@online.ln.cn

The candles you need, the machines I supply!

• First of all, thank you for your interesting in my products.

• The machine is simple in structure and small in size. The mould are made of seamless steel pipes. section

steel and steel sheet to assure precision and easy operation. The pushrods are connected with seamless s

teel threads and can be moved up and down to vary the length of the candle. The machine is cooled throu

gh a circulating water system.

• The various models of candle expect for specifications on the catalogue we make other models of machine

s according to the candle sizes and samples given by the customers. Besides, we have more than 280 kin

d of candle machines, welcome to order. We also produce pule Changeable candle machine and taillight pr

essing tally automatic candle machine.

• I also can produce the machine based on your requirement, so if you have ideal shape of the candle pleas

e inform me and I will make the machine meet your request exactly.

• Now, you can see some photo of the candles which produced from my machine

Candles

• Common shape candle

• Taper shape candle

• Pillar shape candle

• Votive shape candle

• Tea-light shape candle

• Spiral shape candle

• Birthday candle

• Special shape candle

All the candles you need!

Which shape you need, tell me!

Votive Shape Candle making machine

• A brief of the candle making machine

• My moulding machines are specially designed for making candles of various forms.

• Structure and Performance of votive candle making machine

• 2.1 Structure• The machine is composed of water tank, machin

e frame, hand wheel, spindle, bevel gear, lead screw, cross beam, pins and candle moulding tubes, etc.

• 2.2 Performance• Water tank, candle moulding tube enable the flui

d wax to solidify by means of circulating water in the tube.

• Heads and push-off tubes are used for the forming of the candle tip and the push of the candle from the candle moulding tube.

Installation and Test run

• The machine is a movable design and need no f

ixed foundation just place the machine smooth a

nd steady.

• Check carefully if any spare parts are turning loo

se or tends to fall off, and clean the accumulate

d dirt on all parts of the machine. Fill oil on all lu

brication points. Candle moulding tubes shall be

smeared with small amount of lubricant or white

Vaseline oil. Raise and lower the cross beam of

the unloaded machine several times, if it’s very f

lexible to be started and in normal operation, the

n swing the crank handle to lower the cross bea

m to the stopping position.

Operation of the machine

• Correctly mount the guide rail support.

• Level and string well the steel string bar.

• More the water tank back and forth to see if it ca

n move freely.

• Run the unloaded machine.

• Rotate the handwheel to raise the cross beam sl

owly.

• Check if the lead heads can all enter the candle

moulding tubes smoothly. If not, locating bolts m

ay be adjusted

Pouring the wax

• Rotate the handwheel, the cross beam rises t

ill the step of the lead head contacts with bot

tom of the candle moulding tube completely.

• Pour the molten wax liquid into the slot of th

e water tank.

Crush the balance wax away

• As the wax liquid half solidifies, dump

the residual wax liquid.

Rotate the wheel• Pull the elevation handle of the second cross

beam and let the second cross beam rise till steel wires emerge 10 ~ 15mm above the top of water tank.

• After the wax liquid solidifies completely, pull the second cross beam up-down handle, the second cross beam falls to the low stopping position.

Get the candles

• Rotate the handwheel, the first cross beam falls to the low stopping position. If there are still candles remaining in the moulding tubes just press the candle with hands and make them fall on the cross beam

The Final thing you do!

• Push back the water tank and let it rest lightly against the locating bolt.

• Rotate the handwheel, again raise the cross beam till the step of the lead head and the bottom of the candle moulding tubes contact completely

• Description for the votive mould

• The candle mould will be designed based on the specification of the candle supplied by my customers. There is a pin which will place a hole in the votive candle in the mould.

Technology supported by Xuguan

• It is a good thing for me to talk with you about candle making, if you have any question or problem,

please do not hesitate to contact me.

• Www.xuguan.net

• xuguan@online.ln.cn

• webmaster@xuguan.net

• Tel: 86-1300 947 1870