volumetric flasks - DACCHIM...volumetric flask base area. Volumetric flasks of standard body shape...

of 40/40
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN EN 1042 and DIN 12664. Individually calibrated through automatic calibration process carried out by robots. Permanent quality control through all steps eliminate possible deviations from nominal values. Calibrated to contain (In) and all the tolerances are according to DIN/ISO Class “A” standards. Conformity (“H”) certified, with a batch number printed on the body. Batch certificate can be downloaded from our website. Inscriptions are printed either with blue enamel or amber stain diffusion ink. Diamond grinded meniscus ring mark is for longer persistance. They are supplied with polyethylene stopper. class “A” volumetric flasks clear tolerance neck size quantity in box volume 1 ml 2 ml 3 ml 4 ml 5 ml 5 ml 10 ml 20 ml 25 ml 25 ml 50 ml 50 ml 100 ml 100 ml 150 ml 200 ml 250 ml 300 ml 400 ml 500 ml 1000 ml 2000 ml 5000 ml 10000 ml standard body blue scale standard body amber scale neck inner diameter approximate height trapezoidal body blue scale 013.01.005 013.01.010 013.01.020 013.01.025 013.01.026 013.01.050 013.01.051 013.01.100 013.01.101 013.01.150 013.01.200 013.01.250 013.01.300 013.01.400 013.01.500 013.01.901 013.01.902 013.01.905 013.01.910 013.03.005 013.03.010 013.03.020 013.03.025 013.03.026 013.03.050 013.03.051 013.03.100 013.03.101 013.03.150 013.03.200 013.03.250 013.03.300 013.03.400 013.03.500 013.03.901 013.03.902 013.03.905 013.03.910 ± 0.025 ml ± 0.025 ml ± 0.025 ml ± 0.025 ml ± 0.025 ml ± 0.025 ml ± 0.025 ml ± 0.040 ml ± 0.040 ml ± 0.040 ml ± 0.060 ml ± 0.060 ml ± 0.100 ml ± 0.100 ml ± 0.150 ml ± 0.150 ml ± 0.150 ml ± 0.200 ml ± 0.200 ml ± 0.250 ml ± 0.400 ml ± 0.600 ml ± 1.200 ml ± 2.000 ml NS 07/16 NS 07/16 NS 07/16 NS 07/16 NS 07/16 NS 10/19 NS 10/19 NS 10/19 NS 10/19 NS 12/21 NS 12/21 NS 14/23 NS 12/21 NS 14/23 NS 14/23 NS 14/23 NS 14/23 NS 14/23 NS 19/26 NS 19/26 NS 24/29 NS 29/32 NS 34/35 NS 45/40 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 2 pieces 1 piece 1 piece 013.13.001 013.13.002 013.13.003 013.13.004 013.13.005 013.13.010 013.13.020 013.13.025 013.13.050 volumetric laboratory 65 mm 70 mm 70 mm 70 mm 70 mm 70 mm 90 mm 110 mm 110 mm 110 mm 140 mm 140 mm 170 mm 170 mm 190 mm 210 mm 220 mm 230 mm 250 mm 260 mm 300 mm 370 mm 475 mm 570 mm 7.50 mm 7.50 mm 7.50 mm 7.50 mm 7.50 mm 10.00 mm 10.00 mm 10.00 mm 10.00 mm 12.50 mm 12.50 mm 14.50 mm 12.50 mm 14.50 mm 14.50 mm 14.50 mm 14.50 mm 14.50 mm 18.80 mm 18.90 mm 24.00 mm 29.20 mm 34.50 mm 45.00 mm www.dacchim.ro tel/fax: 021 3440665
  • date post

    28-Oct-2020
  • Category

    Documents

  • view

    10
  • download

    0

Embed Size (px)

Transcript of volumetric flasks - DACCHIM...volumetric flask base area. Volumetric flasks of standard body shape...

  • Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.

    They meet the highest quality standards according toDIN EN 1042 and DIN 12664.

    Individually calibrated through automatic calibrationprocess carried out by robots.

    Permanent quality control through all steps eliminatepossible deviations from nominal values.

    Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.

    Conformity (“H”) certified, with a batch numberprinted on the body.

    Batch certificate can be downloaded from our website.

    Inscriptions are printed either with blue enamel oramber stain diffusion ink.

    Diamond grinded meniscus ring mark is for longerpersistance.

    They are supplied with polyethylene stopper.

    class “A”volumetric flasks

    clear

    tolerance neck sizequantityin boxvolume

    1 ml2 ml3 ml4 ml5 ml5 ml

    10 ml20 ml25 ml25 ml50 ml50 ml

    100 ml100 ml150 ml200 ml250 ml300 ml400 ml500 ml

    1000 ml2000 ml5000 ml

    10000 ml

    standard bodyblue scale

    standard bodyamber scale

    neck innerdiameter

    approximateheight

    trapezoidal bodyblue scale

    013.01.005013.01.010013.01.020013.01.025013.01.026013.01.050013.01.051013.01.100013.01.101013.01.150013.01.200013.01.250013.01.300013.01.400013.01.500013.01.901013.01.902013.01.905013.01.910

    013.03.005013.03.010013.03.020013.03.025013.03.026013.03.050013.03.051013.03.100013.03.101013.03.150013.03.200013.03.250013.03.300013.03.400013.03.500013.03.901013.03.902013.03.905013.03.910

    ± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.040 ml± 0.040 ml± 0.040 ml± 0.060 ml± 0.060 ml± 0.100 ml± 0.100 ml± 0.150 ml± 0.150 ml± 0.150 ml± 0.200 ml± 0.200 ml± 0.250 ml± 0.400 ml± 0.600 ml± 1.200 ml± 2.000 ml

    NS 07/16NS 07/16NS 07/16NS 07/16NS 07/16NS 10/19NS 10/19NS 10/19NS 10/19NS 12/21NS 12/21NS 14/23NS 12/21NS 14/23NS 14/23NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 24/29NS 29/32NS 34/35NS 45/40

    2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces1 piece1 piece

    013.13.001013.13.002013.13.003013.13.004013.13.005

    013.13.010013.13.020013.13.025

    013.13.050

    volumetric laboratory

    65 mm70 mm70 mm70 mm70 mm70 mm90 mm

    110 mm110 mm110 mm140 mm140 mm170 mm170 mm190 mm210 mm220 mm230 mm250 mm260 mm300 mm370 mm475 mm570 mm

    7.50 mm7.50 mm7.50 mm7.50 mm7.50 mm

    10.00 mm10.00 mm10.00 mm10.00 mm12.50 mm12.50 mm14.50 mm12.50 mm14.50 mm14.50 mm14.50 mm14.50 mm14.50 mm18.80 mm18.90 mm24.00 mm29.20 mm34.50 mm45.00 mm

    www.dacchim.rotel/fax: 021 3440665

  • volume1 ml2 ml3 ml4 ml5 ml5 ml

    10 ml20 ml25 ml25 ml50 ml50 ml

    100 ml100 ml150 ml200 ml250 ml300 ml400 ml500 ml

    1000 ml

    neck innerdiameter

    approximateheight

    class “A”volumetric flasks

    amber

    They have exactly same specifications as clearvolumetric flasks.

    All the inscriptions are printed with white enamel.

    As an alternative for polyethylenestoppers which are supplied asa standard to volumetric flasks,a glass stopper can be selectedfrom our catalogue page no 80.

    standardvolumetric flask

    base area.

    Trapezoidalvolumetric flask

    base area.

    Volumetric flasks of standardbody shape with small capacitycan tip over more easily due totheir higher center of gravity.Trapezoidal volumetric flaskshave a much larger base areawhich ensures higher stability.Compared to standard volumetricflasks of the same capacity,trapezoidal flasks have at leasttwice base area.

    volumetric laboratory

    standard bodywhite scale

    014.01.005014.01.010014.01.020014.01.025014.01.026014.01.050014.01.051014.01.100014.01.101014.01.150014.01.200014.01.250014.01.300014.01.400014.01.500014.01.901

    trapezoidal bodywhite scale013.15.001013.15.002013.15.003013.15.004013.15.005

    013.15.010013.15.020013.15.025

    013.15.050

    tolerance± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.025 ml± 0.040 ml± 0.040 ml± 0.040 ml± 0.060 ml± 0.060 ml± 0.100 ml± 0.100 ml± 0.150 ml± 0.150 ml± 0.150 ml± 0.200 ml± 0.200 ml± 0.250 ml± 0.400 ml

    neck sizeNS 07/16NS 07/16NS 07/16NS 07/16NS 07/16NS 10/19NS 10/19NS 10/19NS 10/19NS 12/21NS 12/21NS 14/23NS 12/21NS 14/23NS 14/23NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 24/29

    quantityin box

    2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces

    65 mm70 mm70 mm70 mm70 mm70 mm90 mm

    110 mm110 mm110 mm140 mm140 mm170 mm170 mm190 mm210 mm220 mm230 mm250 mm260 mm300 mm

    7.50 mm7.50 mm7.50 mm7.50 mm7.50 mm

    10.00 mm10.00 mm10.00 mm10.00 mm12.50 mm12.50 mm14.50 mm12.50 mm14.50 mm14.50 mm14.50 mm14.50 mm14.50 mm18.80 mm18.90 mm24.00 mm

    www.dacchim.rotel/fax: 021 3440665

  • tolerancequantityin boxvolume

    5 ml10 ml25 ml50 ml

    100 ml250 ml500 ml

    1000 ml2000 ml

    glass baseblue scale

    glass baseamber scale subdivision

    approximateheight

    P.P basewhite scale

    Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.

    They meet the highest quality standards according toDIN EN 4788 and DIN 12660.

    Individually calibrated through automatic calibrationprocess carried out by robots.

    Permanent quality control through all steps eliminatepossible deviations from nominal values.

    Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.

    Conformity (“H”) certified, with a batch numberprinted on the body.

    Batch certificate can be downloaded from our website.

    Hexagonal cylinder base provides excellent stability.

    Perfect spout design assures pouring without any drips.

    Inscriptions and graduations are printed either withblue enamel or amber stain diffusion ink.

    class “A”measuring cylinders

    high form

    015.01.005015.01.010015.01.025015.01.050015.01.100015.01.250015.01.500015.01.901015.01.902

    015.03.005015.03.010015.03.025015.03.050015.03.100015.03.250015.03.500015.03.901015.03.902

    015.05.010015.05.025015.05.050015.05.100015.05.250015.05.500015.05.901

    115 mm135 mm160 mm195 mm240 mm320 mm380 mm465 mm565 mm

    2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces1 piece

    ± 0.050 ml± 0.100 ml± 0.250ml± 0.500 ml± 0.500 ml± 1.000 ml± 2.500 ml± 5.000 ml± 10.000 ml

    volumetric laboratory

    ± 0.100 ml± 0.200ml± 0.500 ml± 1.000 ml± 1.000 ml± 2.000 ml± 5.000 ml± 10.000 ml± 20.000 ml

    Thick and durable plastic base ofthe cylinder does not have therisk of breaking during applicationThe plastic base fits the cylinderbody perfectly well and can beeasily dismantle.

    www.dacchim.rotel/fax: 021 3440665

  • tolerance neck sizequantityin boxvolume

    10 ml25 ml50 ml

    100 ml250 ml500 ml

    1000 ml

    glass baseblue scale

    glass baseamber scale subdivision

    approximateheight

    P.P basewhite scale

    class “A”mixing cylinders

    high form

    016.01.010016.01.025016.01.050016.01.100016.01.250016.01.500016.01.901

    016.03.010016.03.025016.03.050016.03.100016.03.250016.03.500016.03.901

    015.06.010015.06.025015.06.050015.06.100015.06.250015.06.500015.06.901

    2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces2 pieces

    135 mm160 mm195 mm240 mm320 mm380 mm465 mm

    0.200 ml0.500 ml1.000 ml1.000 ml2.000 ml5.000 ml10.000 ml

    ± 0.100 ml± 0.250ml± 0.500 ml± 0.500 ml± 1.000 ml± 2.500 ml± 5.000 ml

    volumetric laboratory

    NS 10/19NS 14/23NS 19/26NS 24/29NS 29/32NS 34/35NS 45/40

    As an alternative for polyethylenestoppers which are supplied asa standard to mixing cylinders, aglass stopper can be selectedfrom our catalogue page no 80.

    Manufactured from borosilicate glass 3.3 which isresistant to heat and almost all chemicals.

    They meet the highest quality standards according toDIN EN 4788 and DIN 12660.

    Individually calibrated through automatic calibrationprocess carried out by robots.

    Permanent quality control through all steps eliminatepossible deviations from nominal values.

    Calibrated to contain (In) and all the tolerances areaccording to DIN/ISO Class “A” standards.

    Conformity (“H”) certified, with a batch numberprinted on the body.

    Batch certificate can be downloaded from our website.

    Perfect neck grinding which prevents spillage duringmixing process.

    Inscriptions and graduations are printed either withblue enamel or amber stain diffusion ink.

    They are supplied with polyethylene stopper.

    www.dacchim.rotel/fax: 021 3440665

  • class “B”volumetric flasks

    polypropylene

    volumetric laboratory

    Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.

    They offer high transperency, chemical resistance and remarkable heat tolerance.

    They meet the highest quality standards according to DIN EN 1042

    Individually calibrated through automatic calibration process carried out by robots.

    Permanent quality control through all steps eliminate possible deviations from nominal values

    Volumetric flasks are calibrated to contain (In) and the tolerances are according to DIN/ISO Class ”B” standards.

    Flasks have inscriptions and meniscus ring mark in blue enamel which is specially designed for plastic and resistant to 60°C.

    For consistent accurracy, polypropylene volumetric flasks schould not be used with liquids over 60°Cand should not be kept under sun or over heatedconditions.

    volume25 ml50 ml

    100 ml250 ml500 ml

    1000 ml

    neck inner diameter

    approximateheight

    quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece

    neck sizeNS 10/19NS 12/21NS 12/21NS 14/23NS 19/26NS 24/29

    tolerance± 0.080 ml± 0.120 ml± 0.200 ml± 0.300 ml± 0.500 ml± 0.600 ml

    blueinsriptions014.03.025014.03.050014.03.100014.03.250014.03.500014.03.901

    110 mm140 mm170 mm220 mm260 mm300 mm

    10.00 mm12.50 mm12.50 mm14.50 mm18.80 mm24.00 mm

    www.dacchim.rotel/fax: 021 3440665

  • class “B”measuring cylinders

    polypropylene

    volumetric laboratory

    Manufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.

    They offer high transperency, chemical resistance and remarkable heat tolerance.

    They meet the highest quality standards according to DIN 12681 and ISO 6706.

    Individually calibrated through automatic calibration process carried out by robots.

    Permanent quality control through all steps eliminate possible deviations from nominal values.

    Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class ”B” standards.

    Graduations are either as embossed scale or in blue enamel which is specially designed for plastic and resistant to 60°C.

    For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under sun and over heatedconditions.

    volume10 ml25 ml50 ml

    100 ml250 ml500 ml

    1000 ml

    subdivisionblue

    graduation016.06.010016.06.025016.06.050016.06.100016.06.250016.06.500016.06.901

    embossedgraduation016.05.010016.05.025016.05.050016.05.100016.05.250016.05.500016.05.901

    tolerance± 0.200 ml± 0.500 ml± 1.000 ml± 1.000 ml± 2.000 ml± 5.000 ml

    ± 10.000 ml

    approximateheight

    135 mm160 mm195 mm240 mm320 mm380 mm465 mm

    quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    0.200 ml0.500 ml1.000 ml1.000 ml2.000 ml5.000 ml

    10.000 ml

    www.dacchim.rotel/fax: 021 3440665

  • class “AS”straight burettes

    clear

    volumetric laboratory

    Manufactured from pre-vacuum calibrated borosilicate 3.3 glass tubes.

    They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.

    Permanent quality control through all steps eliminate possible deviations from nominal values

    Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.

    Conformity (“H”) certified, with a batch number printed on the body.

    Batch certificate can be downloaded from our website.

    Supplied with grease free and self lubricating PTFE stopcocks.

    Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.

    Manufactured either with or without schellbach stripe.

    PTFE stopcocks have identical keys so that there is no need for “matching the pairs” during cleaning.Since PTFE is almost self lubricating, keys do not require greasing at all. PTFE keys are interchangable and replacable.

    volume10 ml25 ml50 ml

    approximateheight

    w/o schellbachblue graduation

    017.02.010017.02.025017.02.050

    with schellbachblue graduation

    017.01.010017.01.025017.01.050

    w/o schellbachamber graduation

    017.10.010017.10.025017.10.050

    with schellbachamber graduation

    017.09.010017.09.025017.09.050

    tolerance± 0.020 ml± 0.030 ml± 0.050 ml

    subdivision0.02 ml0.05 ml0.10 ml

    quantityin box

    1 piece1 piece1 piece

    770 mm770 mm770 mm

    www.dacchim.rotel/fax: 021 3440665

  • VALVE stopcocks have PTFE keys which do not require greasing at all.Due to the unique “needle” shape of the key, the burette valve can be closed with a gentle turn.This keys can provide the best drop control during titration process.

    Manufactured from pre-vacuum calibrated borosilicate 3.3 glass tubes.

    They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.

    Permanent quality control through all steps eliminate possible deviations from nominal values.

    Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.

    Conformity (“H”) certified, with a batch number printed on the body.

    Batch certificate can be downloaded from the website.

    Supplied with grease free and self lubricating VALVE stopcocks.

    Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.

    Manufactured either with or without schellbach stripe.

    class “AS”straight burettes

    clear

    volume10 ml25 ml50 ml

    approximateheight

    w/o schellbachblue graduation

    017.04.010017.04.025017.04.050

    with schellbachblue graduation

    017.03.010017.03.025017.03.050

    w/o schellbachamber graduation

    017.12.010017.12.025017.12.050

    with schellbachamber graduation

    017.11.010017.11.025017.11.050

    tolerance± 0.020 ml± 0.030 ml± 0.050 ml

    subdivision0.02 ml0.05 ml0.10 ml

    quantityin box

    1 piece1 piece1 piece

    volumetric laboratory

    770 mm770 mm770 mm

    www.dacchim.rotel/fax: 021 3440665

  • class “AS”straight burettes

    amber

    volumetric laboratory

    Manufactured from pre-vacuum calibrated borosilicate glass.

    They meet the highest quality standards according to DIN EN ISO 385 and DIN 12700.

    Permanent quality control through all steps eliminate possible deviations from nominal values.

    Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.

    Conformity (“H”) certified, with a batch number printed on the body.

    Batch certificate can be downloaded from our website.

    Supplied with either PTFE or VALVE stopcocks.

    Inscriptions and graduations are printed with white enamel which is specially designed for glass use.

    Amber burettes are manufactured without schellbach stripe.

    Metal burette clamps are made out of steel and can hold one burette at a time.Graduations and meniscus line of the burette are clearly visible.They can be used on support rods of 8-14 mm diameter.Catalogue No: 018.05.001

    Polypropylene burette clamp can hold one burette at a time.Graduations and meniscus line of the burette are clearly visible.They can be used on support rods of 10-12 mm diameter.Catalogue No: 018.06.001

    volume10 ml25 ml50 ml

    quantityin box1 piece1 piece1 piece

    with VALVE stopcockwhite graduations

    018.02.010018.02.025018.02.050

    with PTFE stopcockwhite graduations

    018.01.010018.01.025018.01.050

    tolerance± 0.020 ml± 0.030 ml± 0.050 ml

    subdivision0.02 ml0.05 ml0.10 ml

    www.dacchim.rotel/fax: 021 3440665

  • class “AS”modular burettes

    clear & amber

    burette tubes for modular burettes

    volume10 ml25 ml50 ml

    subdivision0.02 ml0.05 ml0.10 ml

    tolerance± 0.020 ml± 0.030 ml± 0.050 ml

    amber - w/o schellbachwhite graduations

    017.24.010017.24.025017.24.050

    clear - schellbachamber graduations

    017.21.010017.21.025017.21.050

    clear - schellbachblue graduations

    017.17.010017.17.025017.17.050

    volume10 ml25 ml50 ml

    clear - schellbachblue graduations

    017.25.010017.25.025017.25.050

    clear - schellbachamber graduations

    017.29.010017.29.025017.29.050

    amber - w/o schellbachwhite graduations

    017.31.010017.31.025017.31.050

    tolerance± 0.020 ml± 0.030 ml± 0.050 ml

    subdivision0.02 ml0.05 ml0.10 ml

    quantityin box1 piece1 piece1 piece

    volumetric laboratory

    All components of the modular burette are replacable.

    Multiple burette tubings can be used with one single stopcock.

    Modular construction with detachable burette tube and stopcock enables fast dismantle and easy cleaning.

    Inscriptions and graduations are printed either with blue enamel or white enamel for the amber burettes.

    Clear burettes are manufactured with schellbach stripe

    Other technical specifications are exactly the same as other types of burettes.

    quantityin box1 piece1 piece1 piece

    Modular construct ion with detachable burette tube and stopcock enables fast dismantle and easy cleaning.

    www.dacchim.rotel/fax: 021 3440665

  • Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the residual liquid.

    Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.

    Clear burettes are manufactured with schellbach stripe.

    Other technical specifications are exactly the same as other types of burettes.

    class “AS”automatic burettes

    clear

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    019.03.010019.03.025019.03.050

    with schellbachamber graduations

    019.01.010019.01.025019.01.050

    with schellbachblue graduations

    volumetric laboratory

    All automatic burettes have an intermediate PTFE stopcock which enables fast and accurate measurement.

    Burette bellow for automatic burettes is made out of best quality natural rubber.Catalogue No: 020.08.001

    www.dacchim.rotel/fax: 021 3440665

  • class “AS”automatic burettes

    amber

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    019.05.010019.05.025019.05.050

    w/o schellbachwhite scale

    volumetric laboratory

    Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the residual liquid.

    Inscriptions and graduations are printed with white enamel which is specially designed for glass use.

    Amber burettes are manufactured without schellbach stripe.

    Other technical specifications are exactly the same as other types of burettes.

    Clear bottle for automatic burettes is made out of heat resistant glass. Each bottle has a NS 29/32 neck grinding that fits to burette.Total volume capacity of the bottle is 2000 ml.Catalogue No: 020.07.010

    Amber bottle for automatic burettes is made out of heat resistant glass. Each bottle has a NS 29/32 neck grinding that fits to burette.Total volume capacity of the bottle is 2000 ml.Catalogue No: 020.07.025

    www.dacchim.rotel/fax: 021 3440665

  • spare modular burette tubes

    class “AS”automatic burettes

    modular

    volumetric laboratory

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    020.11.010020.11.025020.11.050

    clear - schellbachblue graduations

    020.13.010020.13.025020.13.050

    amber - w/o schellbachwhite graduations

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    020.01.010020.01.025020.01.050

    clear - schellbachblue graduations

    020.10.010020.10.025020.10.050

    amber - w/o schellbachwhite graduations

    Modular automatic burette offers an economical alternative to classical automatic burettes.

    The entire system consists of a burette tubing with automatic zeroing system, a modular stopcock, a reservoir bottle, a burette clamp and a burette stand.

    All components of these burettes are replacable.

    Multiple burette tubings can be used with one single stopcock.

    Modular construction with detachable burette tube and stopcock enables fast dismantle and easy cleaning.

    Inscriptions and graduations are printed either with blue enamel or with white enamel which is specially designed for glass use.

    Clear burettes are manufactured with schellbach stripe.

    10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume.

    Other technical specifications are exactly the same as other types of burettes

    www.dacchim.rotel/fax: 021 3440665

  • class “AS”schilling burettes

    clear & amber

    volumetric laboratory

    Described as automatic burettes with fast titration and practical usage.

    Especially suitable for field analysis where there is a risk of breaking.

    The entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle stand.

    Rapid filling by squeezing the bottle and fast titration by valve stopcock

    Inscriptions and graduations are printed either with blue enamel or with white enamel which is specially designed for glass use.

    Clear burettes are manufactured with schellbach stripe.

    Amber burettes are manufactured without schellbach stripe.

    10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used wi th bot t les of 1000 ml volume.

    Other technical specifications are exactly the same as other types of burettes.

    spare schilling burette tubes

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    020.06.010020.06.025020.06.050

    clear - schellbachblue graduations

    020.08.010020.08.025020.08.050

    amber - w/o schellbachwhite graduations

    volume10 ml25 ml50 ml

    0.02 ml0.05 ml0.10 ml

    subdivisiontolerance± 0.020 ml± 0.030 ml± 0.050 ml

    020.03.010020.03.025020.03.050

    clear - schellbachblue graduations

    020.05.010020.05.025020.05.050

    amber - w/o schellbachwhite graduations

    www.dacchim.rotel/fax: 021 3440665

  • Tips are carefully formed and bevelled to ensure proper flow rates.

    They meet the highest quality standards according to DIN 12697 and BS 700 - 1583.

    Individually calibrated through automatic calibration process carried out by robots.

    Permanent quality control through all steps eliminate possible deviations from nominal values.

    Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class “AS” standards.

    Conformity (“H”) certified, with a batch number printed on the body.

    Batch certificate can be downloaded from our website.

    Inscriptions and graduations are printed either with blue enamel or amber stain diffusion ink.

    All pipettes have colour coded suction stems to allow fast identification and sorting.

    class “AS”glass pipettes

    graduated & volumetric

    volume1 ml2 ml3 ml4 ml5 ml

    10 ml15 ml20 ml25 ml50 ml

    100 ml

    quantityin box

    1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    length310 mm330 mm360 mm360 mm400 mm440 mm440 mm455 mm510 mm520 mm540 mm

    tolerance± 0.007 ml± 0.010 ml± 0.010 ml± 0.015 ml± 0.015 ml± 0.020 ml± 0.020 ml± 0.030 ml± 0.030 ml± 0.030 ml± 0.050 ml

    volumetricamber scale021.07.001021.07.002021.07.003021.07.004021.07.005021.07.010021.07.011021.07.015021.07.020021.07.025021.07.050

    volumetricblue scale021.05.001021.05.002021.05.003021.05.004021.05.005021.05.010021.05.011021.05.015021.05.020021.05.025021.05.050

    volume1 ml2 ml5 ml

    10 ml20 ml25 ml50 ml

    quantityin box

    10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces

    length360 mm360 mm360 mm360 mm450 mm450 mm720 mm

    tolerance± 0.007 ml± 0.010ml± 0.030 ml± 0.050ml± 0.100 ml± 0.100 ml± 0.200 ml

    graduatedamber scale021.03.001021.03.002021.03.005021.03.010021.03.020021.03.025021.03.050

    graduatedblue scale021.01.001021.01.002021.01.005021.01.010021.01.020021.01.025021.01.050

    volumetric laboratorywww.dacchim.ro

    tel/fax: 021 3440665

  • polypropylenepipette stand

    vertical

    Manufactured from moulded polypropylene and can hold up to 12 pipettes without any pressure on fragile pipette tips.

    Ideal stand to store pipettes without any pressure on fragile pipette tips.

    Easy to clean and dismantle, especially suitable for space saving purpose.

    polypropylenepipette stand

    horizontal

    1 pieceqty/pack

    240x180x290 mmdimensions

    1 pieceqty/pack

    Manufactured from moulded polypropylene and can hold up to 94 pipettes vertically.

    Can rotate 360° on a central vertical axis for easy selection of any particular pipette.

    Upper disc keeps the pipettes in the correct position.

    The lower rotating disc has open bottoms which cradle the pipette tips and permit water drops to run off.

    The base plate has a raised edge which enables collection of dripping liquids.

    volumetric laboratory

    022.01.001catalogue number

    022.02.001catalogue number

    dimensions23 cm x H 49 cmø

    www.dacchim.rotel/fax: 021 3440665

  • volumetric laboratory

    pipette fillerpi-pump

    for pipette volume

    up to 2 mlup to 10 mlup to 25 ml

    colourcode

    quantityin box

    1 piece1 piece1 piece

    cataloguenumber

    011.01.002011.01.010011.01.025

    The handwheel allows precise suction of the liquid into the pipette with one hand.

    The handwheel which enables the suction piston is designed for easy operation by using only the thumb.

    When the wheel stops, the piston remains in the desired position.

    The liquid can be blown out by pressing the piston back or allowed to flow out by setting the lateral switch to “Ex”.

    A slight pressure applied to the discharge lever opens the valve and lets the liquid flow out easily.

    pipette fillermacro

    pipette fillermaxi

    Large capacity bulb which works perfectly with all pipette sizes from 1 ml up to 100 ml.

    First squeeze the silicone bulb and the thumb lever controls both the aspirate and dispense modes.

    Incorporates central button to blow out the residual liquid into the pipettes.

    Most common pipette aid for all types of pipettes.

    Has ball valves which can be controlled by finger pressure.

    bluegreenred

    capacity forpipette size1 - 100 ml

    cataloguenumber

    011.02.003

    for pipette volume

    up to 10 mlup to 100 ml

    quantityin box

    1 piece1 piece

    cataloguenumber

    011.02.001011.02.002

    modelname

    standarduniversal

    quantityin pack1 piece

    www.dacchim.rotel/fax: 021 3440665

  • Manufactured according to DIN 12797 standards.

    The upper and lower ends of the stopper is ground and polished.

    Nominal volume and inscriptions are printed with blue enamel.

    Individually calibrated to contain (In) to 0,001 ml.

    Net volume capacity is engraved on the body.

    Each bottle is calibrated together with its stopper.

    In order to differentiate easily, both the body and the stopper have the same code numbers printed on themselves.

    volume5 ml

    10 ml25 ml50 ml

    100 ml

    uncalibrateddensity bottles

    glass

    calibrateddensity bottles

    glass

    calibrated with thermometerdensity bottles

    glass

    quantityin pack1 piece1 piece1 piece1 piece1 piece

    density bottlescalibrated + thermometer

    023.03.005023.03.010023.03.025023.03.050023.03.100

    density bottlescalibrated

    023.02.005023.02.010023.02.025023.02.050023.02.100

    density bottlesuncalibrated023.01.005023.01.010023.01.025023.01.050023.01.100

    volumetric laboratory

    Individually calibrated to contain (In) to 0,001 ml.

    Complete with a thermometer of scale -10°C / + 40°C, with graduations of 0,5°C.

    Net volume capacity is engraved on the body.

    Each body is calibrated together with its stopper and thermometer.

    In order to differentiate easily, both the body and the stopper have the same code numbers printed on themselves.

    www.dacchim.rotel/fax: 021 3440665

  • analytical laboratory

    columnschromatography

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    With 2,5 mm bore PTFE stopcock for fine control of fluent flow. Supplied with or without sintered glass support of porosity 0.

    quantityinpack1 piece1 piece1 piece

    socketNS size

    NS 14/23NS 14/23NS 19/26

    effectivelenght

    200 mm300 mm200 mm

    internaldiameter10 mm10 mm15 mm

    volume15 ml25 ml35 ml

    with sintered gas tubegas wash bottles

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    With detachable plastic connectors for easy fitting of flexible tubing.

    Sintered dip tube dispenses gas into bubbles for greater efficiency.

    Other sizes for columns can be supplied on request.

    withsupport

    066.03.015066.03.025066.03.035

    w/osupport

    066.01.015066.01.025066.01.035

    kipp dispensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals for easy dispensing of liquids.

    quantityin pack1 piece1 piece1 piece1 piece1 piece

    reservoirvolume500 ml500 ml500 ml500 ml500 ml

    dispenser headand reservoir067.08.005067.08.010067.08.020067.08.025067.08.050

    dispenserhead

    067.09.005067.09.010067.09.020067.09.025067.09.050

    dispenservolume

    5 ml10 ml20 ml25 ml50 ml

    stemlenght

    130 mm165 mm215 mm

    quantityin pack1 piece1 piece1 piece

    bottle headcatalogue no

    bottlecatalogue no

    bottlevolume125 ml250 ml500 ml

    socketNS size

    NS 29/32NS 29/32NS 29/32

    Other sizes for gas bottles can be supplied on request.

    067.07.125067.07.250067.07.500

    067.06.125067.06.250067.06.500

    www.dacchim.rotel/fax: 021 3440665

  • Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to ISO 3819 and DIN 12331.

    These beakers have thick walls and heavy bases.

    Reinforced rims and spout to prevent breaking during washing and transportation.

    Inscriptions are in white enamel which is specially designed for glass use.

    glassbeakers

    low form

    quantityin boxvolume

    25 ml50 ml

    100 ml150 ml250 ml400 ml600 ml800 ml

    1000 ml2000 ml5000 ml

    10000 ml

    glass beakerswhite scale

    approximateheight Diameter

    025.01.025025.01.050025.01.100025.01.150025.01.250025.01.400025.01.600025.01.800025.01.901025.01.902025.01.905025.01.910

    50 mm60 mm70 mm80 mm95 mm

    110 mm125 mm135 mm145 mm185 mm270 mm325 mm

    34 mm42 mm50 mm60 mm70 mm80 mm90 mm

    100 mm105 mm130 mm170 mm228 mm

    10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces1 piece1 piece

    analytical laboratory

    polypropylenebeakers

    low form

    Manufactured from ultra clear virgin polypropylene which provides thick walls with superior chemical resistance.

    They meet the highest quality standards according to ISO 7056.

    Inscriptions are either blue enamel which is specially designed for plastic use or with embossed scale.

    volume25 ml50 ml

    100 ml250 ml500 ml

    1000 ml2000 ml

    P.P beakersembossed026.01.025026.01.050026.01.100026.01.250026.01.500026.01.901026.01.902

    P.P beakersblue scale026.03.025026.03.050026.03.100026.03.250026.03.500026.03.901026.03.902

    quantityin pack1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    height47 mm60 mm70 mm93 mm

    119 mm147 mm184 mm

    diameter32 mm39 mm50 mm67 mm88 mm

    109 mm133 mm

    www.dacchim.rotel/fax: 021 3440665

  • polypropylenebeakers with handle

    high form

    Uniquely shaped ergonomic handles are suitable for space saving and stacking

    stainless steelbeaker tong

    Manufactured from ultra clear virgin polypropylene which provides thick walls with superior chemical resistance.

    They have specially designed functional spouts in order to minimize posible spills.

    They meet the highest quality standards according to ISO 7056.

    Inscriptions are either blue enamel which is specially designed for plastic use or with embossed scale.

    volume250 ml500 ml

    1000 ml2000 ml3000 ml

    analytical laboratory

    for beakersvolume

    up to 1000 ml

    quantityin box1 piece

    flasktong

    026.03.001length

    300 mm

    Beaker tong of 300 mm length is made out of stainless steel.

    Insulated jaws are used to hold all types of beakers.

    beakers w.handleblue scale

    026.04.250026.04.500026.04.901026.04.902026.04.903

    beakers w.handleembossed scale

    026.02.250026.02.500026.02.901026.02.902026.02.903

    quantityin pack1 piece1 piece1 piece1 piece1 piece

    height115 mm137 mm167 mm217 mm244 mm

    diameter75 mm

    100 mm125 mm148 mm170 mm

    www.dacchim.rotel/fax: 021 3440665

  • glasserlenmeyers

    medium neck

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to ISO 1773 and DIN 12380.

    Reinforced rims and spout to prevent breaking during washing and transportation.

    Inscriptions are in white enamel which is specially designed for glass use.

    glasserlenmeyers

    screw cap

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    Ideal for contamination free storage of culture specimen and media.

    Autoclavable flasks and PP screw caps are resistant up to 121°C.

    Inscriptions are in white enamel which is specially designed for glass use.

    analytical laboratory

    volume100 ml250 ml500 ml

    1000 ml

    glass erlenmeyerswith screw cap

    027.03.100027.03.250027.03.500027.03.901

    necksize

    GL 32GL 32GL 32GL 32

    approximateheight

    110 mm145 mm180 mm225 mm

    quantityin pack1 piece1 piece1 piece1 piece

    quantityin boxvolume

    50 ml100 ml250 ml300 ml500 ml

    1000 ml2000 ml

    approximateheight

    internal neckdiameter

    glass erlenmeyerswhite scale027.01.050027.01.100027.01.250027.01.300027.01.500027.01.901027.01.902

    85 mm105 mm145 mm160 mm190 mm215 mm285 mm

    55 mm65 mm85 mm90 mm

    105 mm130 mm165 mm

    10 pieces10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces

    www.dacchim.rotel/fax: 021 3440665

  • polypropyleneerlenmeyers

    screw cap

    glasserlenmeyers

    ground neck

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12387.

    NS necks are in compliance with DIN 12242 standards.

    Inscriptions are in white enamel which is specially designed for glass use.

    volume50 ml50 ml50 ml50 ml

    100 ml100 ml100 ml100 ml250 ml250 ml250 ml300 ml500 ml500 ml500 ml

    1000 ml1000 ml2000 ml

    approx.height85 mm85 mm85 mm85 mm

    100 mm100 mm100 mm100 mm140 mm140 mm140 mm156 mm175 mm175 mm175 mm220 mm220 mm280 mm

    bottomdiameter

    51 mm51 mm51 mm51 mm64 mm64 mm64 mm64 mm85 mm85 mm85 mm87 mm

    105 mm105 mm105 mm131 mm131 mm166 mm

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    neckNS size

    glass erlenmeyerswith NS neck028.01.050028.01.051028.01.052028.01.053028.01.100028.01.101028.01.102028.01.103028.01.250028.01.251028.01.252028.01.300028.01.500028.01.501028.01.502028.01.900028.01.901028.01.902

    analytical laboratory

    Manufactured from high grade polypropylene.

    These erlenmeyers are an excellent break-resistant alternative to glass.

    Screened on graduations of approximate volumes.

    Supplied with contamination free and leakproof polypropylene screw caps.

    volume50 ml

    100 ml250 ml500 ml

    1000 ml

    glass erlenmeyerswith screw cap

    028.03.050028.03.100028.03.250028.03.500028.03.901

    necksize

    GL 40GL 40GL 52GL 52GL 52

    height92 mm

    113 mm146 mm182 mm227 mm

    quantityin box1 piece1 piece1 piece1 piece1 piece

    www.dacchim.rotel/fax: 021 3440665

  • glassflasks

    flat & round bottom

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to ISO 1773 and DIN 12348.

    NS necks are in compliance with DIN 12348 standards.

    Reinforced rims are used to prevent breaking during washing and transportation.

    ground neckflasks

    flat & round bottom

    They meet the highest quality standards according to DIN 12394.

    All other technical and physical specifications are similaras flat and round bottom flasks.

    volume50 ml

    100 ml250 ml500 ml

    1000 ml2000 ml4000 ml6000 ml

    10000 ml

    quantityin box

    10 pieces10 pieces10 pieces10 pieces10 pieces6 pieces1 piece1 piece1 piece

    approx.diameter

    51 mm64 mm85 mm

    105 mm131 mm166 mm207 mm236 mm279 mm

    approx.height90 mm

    105 mm138 mm163 mm190 mm230 mm275 mm315 mm360 mm

    029.02.050029.02.100029.02.250029.02.500029.02.901029.02.902029.02.904029.02.906029.02.910

    roundbottom

    flatbottom

    029.01.050029.01.100029.01.250029.01.500029.01.901029.01.902029.01.904029.01.906029.01.910

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    neckNS size

    NS 14/23NS 19/26NS 24/29NS 29/32NS 14/23NS 19/26NS 24/29NS 29/32NS 19/26NS 24/29NS 29/32NS 24/29NS 29/32NS 24/29NS 29/32NS 29/32

    approx.height

    100 mm100 mm100 mm100 mm110 mm110 mm110 mm110 mm140 mm140 mm140 mm170 mm170 mm200 mm200 mm250 mm

    volume50 ml50 ml50 ml50 ml

    100 ml100 ml100 ml100 ml250 ml250 ml250 ml500 ml500 ml

    1000 ml1000 ml2000 ml

    roundbottom

    030.02.050030.02.051030.02.052030.02.053030.02.100030.02.101030.02.102030.02.103030.02.250030.02.251030.02.252030.02.500030.02.501030.02.900030.02.901030.02.902

    flatbottom

    030.01.050030.01.051030.01.052030.01.053030.01.100030.01.101030.01.102030.01.103030.01.250030.01.251030.01.252030.01.500030.01.501030.01.900030.01.901030.01.902

    analytical laboratorywww.dacchim.ro

    tel/fax: 021 3440665

  • with 3 NS jointflasks

    ground neck

    with 2 NS jointflasks

    ground neck

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They have thick walls, heavy bases and reinforced rims which prevent breaking.

    They meet the highest quality standards according to DIN 12394.

    Side arms are either parallel or 45 degree angled with each other.

    NS necks are in compliance with DIN 12242 standards.

    Other NS sizes for flasks can be supplied on request.

    volume100 ml250 ml500 ml

    1000 ml250 ml500 ml

    1000 ml2000 ml

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    diameter64 mm85 mm

    105 mm131 mm85 mm

    105 mm131 mm

    centerNS size

    NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32

    sideNS size

    NS 14/23NS 14/23NS 14/23NS 14/23NS 29/32NS 29/32NS 29/32NS 29/32

    round bottomangled side arm

    030.03.100030.03.250030.03.500030.03.901030.04.250030.04.500030.04.901030.04.902

    round bottomparallel side arm

    030.05.100030.05.250030.05.500030.05.901030.06.250030.06.500030.06.901030.06.902

    Other NS sizes for flasks can be supplied on request.

    volume250 ml500 ml

    1000 ml250 ml500 ml

    1000 ml250 ml500 ml

    1000 ml2000 ml

    quantityin box

    1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    diameter85 mm

    105 mm131 mm85 mm

    105 mm131 mm85 mm

    105 mm131 mm

    centerNS size

    NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32NS 29/32

    side (L)NS size

    round bottomangled side arm

    round bottomparallel side arm

    side (R)NS size

    NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32

    NS 14/23NS 14/23NS 14/23NS 19/26NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32

    030.16.250030.16.500030.16.901030.17.250030.17.500030.17.901030.18.250030.18.500030.18.901030.18.902

    030.13.250030.13.500030.13.901030.14.250030.14.500030.14.901030.15.250030.15.500030.15.901030.15.902

    analytical laboratory

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    Side arms are either parallel or 45 degree angled with each other.

    Other technical specifications are the same as 2 NS neck flasks.

    www.dacchim.rotel/fax: 021 3440665

  • ground neckflasks

    pear shape

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12383 standards.

    NS necks are in compliance with DIN 12242 standards.

    Reinforced rims are used to prevent breaking during washing and transportation.

    ground neckflasks

    evaporating & receiving

    volume10 ml25 ml50 ml

    100 ml

    cataloguenumber

    029.05.010029.05.025029.05.050029.05.100

    quantityin box1 piece1 piece1 piece1 piece

    NS 14/23NS 14/23NS 14/23NS 14/23

    neckNS size

    quantityin box1 piece1 piece1 piece1 piece

    for spherical jointsclips

    analytical laboratory

    volume100 ml250 ml500 ml1000 ml

    receivingflasks

    029.08.100029.08.250029.08.500029.08.901

    evaporatingflasks

    029.07.100029.07.250029.07.500029.07.901

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12383 standards.

    Manufactured from best quality stainless steel.

    A perfect tool to hold the spherical joints firmly during laboratory applications.

    Suitable for NS 29 joints. Catalogue No: 063.05.001

    Other sizes of spherical joint clips can be supplied on request.

    www.dacchim.rotel/fax: 021 3440665

  • ground neckflasks

    kjeldahl

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to ISO and DIN standards.

    NS necks are in compliance with DIN 12242 standards.

    Reinforced rims are used to prevent breaking during washing and transportation.

    volume100 ml250 ml500 ml750 ml

    1000 ml

    flatbottom

    029.06.100029.06.250029.06.500029.06.750029.06.901

    quantityin box1 piece1 piece1 piece1 piece1 piece

    Flask tong with 300 mm length is made out of stainless steel.

    Insulated jaws are used to hold all types of flasks.

    for flaskscork stands

    Flask stands are made out of the best quality high density cork.

    They are ideal to be used with round bottom flasks.

    stainless steelflask tong

    NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32

    neckNS size

    analytical laboratory

    for flasksvolume100 ml250 ml500 ml

    1000 ml

    quantityin box1 piece1 piece1 piece1 piece

    flaskstands

    029.04.100029.04.250029.04.500029.04.901

    for flasksvolume

    up to 2000 ml

    quantityin box1 piece

    flasktong

    029.03.001length

    300 mm

    approx.diameter

    80 mm100 mm120 mm140 mm

    www.dacchim.rotel/fax: 021 3440665

  • glass & P.P side armallihn condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12581.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    with glassside arm

    033.03.300033.03.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    033.04.300033.04.400

    neckNS size

    NS 29/32NS 29/32

    glass & P.P side armliebig condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12576.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    Other NS sizes for condensers can be supplied on request.

    with glassside arm

    033.01.300033.01.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    033.02.300033.02.400

    neckNS size

    NS 29/32NS 29/32

    Other NS sizes for condensers can be supplied on request.

    analytical laboratorywww.dacchim.ro

    tel/fax: 021 3440665

  • glass & P.P side armdimroth condensers

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12591.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    with glassside arm

    034.03.300034.03.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    034.04.300034.04.400

    neckNS size

    NS 29/32NS 29/32

    with glassside arm

    034.01.300034.01.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    034.02.300034.02.400

    neckNS size

    NS 29/32NS 29/32

    glass & P.P side armcoiled condensers

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12592.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    Other NS sizes for condensers can be supplied on request.

    Other NS sizes for condensers can be supplied on request.

    analytical laboratorywww.dacchim.rotel/fax: 021 3440665

  • for soxhletdimroth condensers

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They are carefully produced in order to meet the highest quality standards.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    with glassside arm

    035.03.300035.03.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    035.04.300035.04.400

    neckNS size

    NS 45/40NS 45/40

    for soxhletallihn condensersManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They are carefully produced in order to meet the highest quality standards.

    Supplied with either glass side arm or polypropylene side arm.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    The side arms accept tubings with 8/9 mm bore size.

    Other NS sizes for condensers can be supplied on request.

    with glassside arm

    035.01.300035.01.400

    quantityin box

    1 piece1 piece

    length300 mm400 mm

    with P.Pside arm

    035.02.300035.02.400

    neckNS size

    NS 45/40NS 45/40

    Other NS sizes for condensers can be supplied on request.

    analytical laboratorywww.dacchim.ro

    tel/fax: 021 3440665

  • with and W/O stopcocksoxhlet extractorsManufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12602.

    Either supplied with PTFE stopcock or without any stopcocks.

    The side arms accept tubings with 8/9 mm bore size.

    withoutstopcock

    036.01.100036.01.150036.01.250036.01.500

    quantityin box

    1 piece1 piece1 piece1 piece

    volume100 ml150 ml250 ml 500 ml

    withstopcock

    036.02.100036.02.150036.02.250036.02.500

    coneNS neck

    socketNS neck

    NS 29/32NS 29/32NS 29/32NS 29/32

    NS 45/40NS 45/40NS 45/40NS 45/40

    Other NS sizes for extractors can be supplied on request.

    for soxhlet extractorscellulose thimblesManufactured from carrefully selected pure cellulose.

    Ideal for soxhlet or other extractions to obtain reproducible results without influencing the samples.

    They have perfectly controlled dimensional accuracy which provides excellent fit to the extractor.

    They are also suitable for extracting solid or liquid particles from the air or gasses.

    Other NS sizes for thimbles can be supplied on request.

    cataloguenumber

    MN.645022MN.645027MN.645026

    quantityin box

    25 pieces25 pieces25 pieces

    for extractorvolume100 ml150 ml250 ml

    heightdiameter33 mm34 mm40 mm

    94 mm120 mm150 mm

    analytical laboratorywww.dacchim.rotel/fax: 021 3440665

  • conicalseparating funnels

    ungraduated031.03.050031.03.100031.03.250031.03.500031.03.901031.03.902

    quantityin box

    1 piece1 piece1 piece1 piece1 piece1 piece

    volume50 ml

    100 ml250 ml500 ml

    1000 ml2000 ml

    graduated031.04.050031.04.100031.04.250031.04.500031.04.901031.04.902

    neckNS size

    NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12451.

    Supplied with totally grease free and self lubricating PTFE stopcock.

    These separating funnels are either with or without graduations.

    Graduations and inscriptions are printed in white enamel.

    They are supplied with polyethylene stoppers.

    squibbseparating funnels

    ungraduated031.01.050031.01.100031.01.250031.01.500031.01.901031.01.902

    quantityin box

    1 piece1 piece1 piece1 piece1 piece1 piece

    volume50 ml

    100 ml250 ml500 ml

    1000 ml2000 ml

    graduated031.02.050031.02.100031.02.250031.02.500031.02.901031.02.902

    neckNS size

    NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32NS 29/32

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12452.

    Supplied with totally grease free and self lubricating PTFE stopcock.

    These separating funnels are either with or without graduations.

    Graduations and inscriptions are printed in white enamel.

    They are supplied with polyethylene stoppers.

    analytical laboratory

    Funnels can be supplied with VALVE stopcock on request.

    Funnels can be supplied with VALVE stopcock on request.

    www.dacchim.rotel/fax: 021 3440665

  • cylindricalseparating funnels

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12566.

    Supplied with totally grease free and self lubricating PTFE stopcock.

    These separating funnels are either with or without graduations.

    Graduations and inscriptions are printed in white enamel.

    They are supplied with polyethylene stoppers.

    analytical laboratory

    Other NS sizes for funnels can be supplied on request.Funnels can be supplied with VALVE stopcock on request.

    ungraduated031.05.050031.05.100031.05.250031.05.500031.05.901

    quantityin box

    1 piece1 piece1 piece1 piece1 piece

    volume50 ml

    100 ml250 ml500 ml

    1000 ml

    graduated031.06.050031.06.100031.06.250031.06.500031.06.901

    neckNS size

    NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32

    conicalW/O relief tube

    032.01.050032.01.100032.01.250032.01.500032.01.901

    quantityin box

    1 piece1 piece1 piece1 piece1 piece

    volume50 ml

    100 ml250 ml500 ml

    1000 ml

    cylindricalW/O relief tube

    032.02.050032.02.100032.02.250032.02.500032.02.901

    cylindricalwith relief tube

    032.03.050032.03.100032.03.250032.03.500032.03.901

    neckNS size

    NS 19/26NS 19/26NS 29/32NS 29/32NS 29/32

    Funnels can be supplied with VALVE stopcock on request.

    conical & cylindricaldropping funnels

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12451 and DIN 12567.

    All dropping funnels are supplied with PTFE stopcock.

    Graduations and inscriptions are printed in white enamel.

    They are supplied with polyethylene stoppers.

    www.dacchim.rotel/fax: 021 3440665

  • glassfunnels

    laboratory

    Manufactured from borosilicate glass 3.3 with short stem and 60° cone angle.

    These funnels are in accordance with DIN 12445 and ISO 4798 standards.

    polypropylenefunnels

    laboratory

    Manufactured from clear, virgin polypropylene.

    Polypropylene funnels are autoclavable at 121°C and 1.1 bar for 30 minutes.

    External ribs prevent airlock and back pressure.

    Ribbed funnels have internal helicoid ribs which prevent filter papers from sticking and increase the filtration speed.

    funneldiameter40 mm60 mm80 mm

    100 mm120 mm150 mm

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece

    glassfunnels

    041.01.040041.01.060041.01.080041.01.100041.01.120041.01.150

    stemdiamater

    6 mm8 mm8 mm

    10 mm16 mm16 mm

    totallength70 mm

    106 mm143 mm178 mm220 mm267 mm

    stemlength40 mm60 mm80 mm

    100 mm120 mm150 mm

    analytical laboratory

    Internal helicoid ribs of the funnels ensure rapid filtration process.

    funneldiameter40 mm60 mm80 mm

    100 mm120 mm150 mm

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece

    funnelsw/o rib

    041.02.040041.02.060041.02.080041.02.100041.02.120041.02.150

    stemdiamater

    6 mm8 mm8 mm

    10 mm16 mm16 mm

    stemlength40 mm60 mm80 mm

    100 mm120 mm150 mm

    funnelswith rib

    041.05.040041.05.060041.05.080041.05.100041.05.120041.05.150

    www.dacchim.rotel/fax: 021 3440665

  • analytical laboratory

    Manufactured from best quality stainless steel.

    Suitable to hold all type of funnels with a diameter up to 150 mm. Can also hold seperating funnels due to the unique design of the holding circle.

    Steel holders are supplied with or without boss head.

    quantityin box1 piece1 piece1 piece1 piece

    st. steel holderW/O boss head

    042.03.040042.03.060042.03.080042.03.100

    holderdiameter40 mm60 mm80 mm

    100 mm

    st. steel holderwith boss head

    042.04.040042.04.060042.04.080042.04.100

    Manufactured from best quality polypropylene.

    Suitable to hold all types of laboratory funnels with diameter up to 150 mm.

    Two tapered wedges are provided to ensure firm grip on roads heaving diameter 10-13 mm.

    Catalogue No: 042.05.001

    stainless steelfunnel holder

    laboratory

    polypropylenefunnel holder

    laboratory

    polypropylenefunnel holder

    separating

    Manufactured from best quality polypropylene.

    Suitable to hold all types of laboratory funnels and also separatory funnels with diameter up to 150 mm.

    Two tapered wedges are provided to ensure firm grip on roads heaving diameter 10-13 mm.

    Catalogue No: 042.06.001

    www.dacchim.rotel/fax: 021 3440665

  • for filter flasksadapters

    rubber

    quantityin box1 piece1 piece1 piece1 piece

    Its special design centers the funnel and flask providing support for funnels.

    A clean seal is created between the flask rim and the funnel.

    Also provide all-round protection reducing impact damages.

    glassfilter flasks

    Manufactured from borosilicate glass 3.3 with thick walls according to ISO 6556 and DIN 12476 standards.

    Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing.

    polypropylenefilter flasks

    Manufactured from clear, virgin polypropylene.

    Side arm of filter flask is suitable to work with 6-10 mm hose diameter.

    quantityin box1 piece1 piece1 piece1 piece1 piece

    flask withglass side arm

    040.01.100040.01.250040.01.500040.01.901040.01.902

    flask withP.P side arm040.02.100040.02.250040.02.500040.02.901040.02.902

    volume100 ml250 ml500 ml

    1000 ml2000 ml

    quantityin box1 piece

    flaskpolypropylene

    040.03.901volume1500 ml

    suitable forflask volume

    100 ml250 - 500 ml

    1000 ml2000 ml

    height10 mm15 mm25 mm25 mm

    diameter23 mm33 mm44 mm58 mm

    cataloguenumber

    040.05.001040.05.002040.05.003040.05.004

    analytical laboratorywww.dacchim.ro

    tel/fax: 021 3440665

  • porcelainfunnels

    Büchner

    Manufactured from glazed porcelain according to DIN 40685 standards.

    Support plate holds the filter paper, prevents blockage of the holes and allows maximum filtration speed.

    analytical laboratory

    Other sizes for funnels can be supplied on request.

    polypropylenefunnels

    Büchner

    Manufactured from clear, virgine polypropylene with the top part having a perforated filter plate.

    The top part can be snap fitted with the lower part forming a vacuum seal.

    Upper and lower parts can be separated from each other for easy and efficient cleaning.

    for filter paper diameter

    nominalvolume

    quantityin box1 piece1 piece

    innerdiameter

    polypropylenefunnels

    042.02.070042.02.110

    200 ml600 ml

    70 - 90 mm110 - 125 mm

    70 mm110 mm

    quantityin box1 piece1 piece

    porcelainfunnels

    042.01.070042.01.110

    nominalvolume200 ml600 ml

    innerdiameter70 mm110 mm

    for filter paper diameter

    70 - 90 mm110 - 125 mm

    forcepsfilter paper

    Manufactured from stainless steel and a perfect tool ideal for handling papers. Catalogue No: 048.04.001

    www.dacchim.rotel/fax: 021 3440665

  • with sintered glass discfunnels

    Gooch

    Comprehensive range of gooch (Büchner) funnels with integral sintered glass discs.

    Practical use since there is no requirement for any filter papers.

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    Highly resistant to most of the corrosive reagents including acids.

    Reinforced rims are used to prevent breakage during washing and transportation.

    porositygrade

    34343434

    nominalvolume

    50 ml50 ml80 ml80 ml

    125 ml125 ml500 ml500 ml

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    discdiameter

    35 mm35 mm45 mm45 mm60 mm60 mm95 mm95 mm

    type3 D3 D

    11 D11 D17 D17 D25 D25 D

    cataloguenumber

    043.01.001043.01.002043.01.003043.01.004043.01.005043.01.006043.01.007043.01.008

    analytical laboratory

    with sintered glass disccrucibles

    Gooch

    Ideal for filtering and drying precipitates and others.

    Practical use since there is no requirement for any filter papers.

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    Reinforced rims are used to prevent breakage during washing and transportation.

    porositygrade

    12341234

    nominalvolume

    30 ml30 ml30 ml30 ml50 ml50 ml50 ml50 ml

    quantityin box1 piece1 piece1 piece1 piece1 piece1 piece1 piece1 piece

    discdiameter30 mm30 mm30 mm30 mm40 mm40 mm40 mm40 mm

    type1 D1 D1 D1 D2 D2 D2 D2 D

    cataloguenumber

    043.02.001043.02.002043.02.003043.02.004043.02.005043.02.006043.02.007043.02.008

    www.dacchim.rotel/fax: 021 3440665

  • narrow & wide neckwash bottles

    polyethylenedropping bottles

    volume100 ml

    amberbottles

    062.04.101

    quantityin pack1 piece

    clearbottles

    062.04.100

    Manufactured from low density polyethylene.

    They have a thin dropper tip that provide regular drops every time.

    Amber bottles prevents UV lights penetrate inside the bottle.

    volume100 ml

    amberbottles

    062.03.100

    quantityin pack1 piece

    clearbottles

    062.02.100

    glassdropping bottles

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    Amber bottles prevents UV lights penetrate inside the bottle.

    volume100 ml250 ml500 ml

    1000 ml

    quantityin pack1 piece1 piece1 piece1 piece

    narrowneck

    062.05.100062.05.250062.05.500062.05.901

    Manufactured from low density polyethylene.

    They are easy to press, semi-rigid, translucent and have excellent clarity.

    The stream of the liquid can be easily controlled by hand pressure.

    Dispensing tip provides extra fine stream. The tip can be folded back in order to increase the flow rate whenever needed.

    analytical laboratory

    wideneck

    062.06.100062.06.250062.06.500062.06.901

    www.dacchim.rotel/fax: 021 3440665

  • non vacuumdesiccators

    glass

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12491.

    quantityin box1 piece1 piece1 piece

    desiccatorsnon vacuum039.01.200039.01.250039.01.300

    desiccatorsvacuum

    039.02.200039.02.250039.02.300

    holes numberon plate

    81013

    desiccatorsplate

    039.05.200039.05.250039.05.300

    platesdesiccator

    porcelain

    Manufactured from glazed porcelain which can resist temperatures up to 1000°C.

    vacuumdesiccators

    glass

    Excellent smooth grinded flanges prevent vacuum leaks and does not need any greasing.

    Desiccator vacuum stopcock is specialy designed to use under vacuum up to 10 Torr.-4

    Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals.

    They meet the highest quality standards according to DIN 12491.

    analytical laboratorywww.dacchim.ro

    tel/fax: 021 3440665