VOLUME III - Engineering Projectsengineeringprojects.com/Tender/UploadFiles/3198_Vol... ·...

AN ISO 9001 & 14001 COMPANY

TENDER DOCUMENT

TENDER No: DLI/CON/749A/562

TENDER FOR CONSTRUCTION OF KALINGA MODEL RESIDENTIAL SCHOOL AT KUCHINDA, DIST. SAMBALPUR, ODISHA.

VOLUME – III

BOQ / PRICE BID

SI. No. DESCRIPTION ESTIMATED COST (Rs.)

1 2 3 4 5

In figures In words In figures In words

1 CIVIL WORKS 84433983

2 ELECTRICAL WORKS & AREA LIGHTING WORK 6962822

3 PH WORKS 2678799

4 FIRE FIGHTING WORKS 1887392

5 BORE WELL 260665

6 BOUNDARY WALL 2079466

7 CC ROAD & DRAIN 1365781

99,668,908

(In Figures)_____________________________________________________________________________________________________________________

(In Words)______________________________________________________________________________________________________________________

ENGINEERING PROJECTS (INDIA) LTD.

(A GOVERNMENT OF INDIA ENTERPRISE)

QUOTING SHEET FOR BIDDERS

Name of work: Construction of Kalinga Model Residential School at Kuchinda, Dist. Sambalpur, Odisha.

NIT No. DLI/CON/749A/562 dated 03.01.2017

TO BE QUOTED BY TENDERER

% (-) BELOW/ AT PAR/ (+) ABOVEAMOUNT IN Rs. AFTER ADDING %

(-) BELOW / (+) ABOVE/ AT PAR

6=(3X4)

Total Tender Cost

BIDDERS FINANCIAL OFFER:

Seal & Signature of Bidder

SI. No. DESCRIPTIONESTIMATED COST

(Rs.)

Add Service Tax +

SWC + KKS @ 6.0%

(Rs.)

Total Estimated Cost (Rs.)

1 CIVIL WORKS 79,654,701 4,779,282 84,433,983

2ELECTRICAL WORKS & AREA

LIGHTING WORK6,568,700 394,122 6,962,822

3 PH WORKS 2,527,169 151,630 2,678,799

4 FIRE FIGHTING WORKS 1,780,558 106,834 1,887,392

5 BORE WELL 245,910 14,755 260,665

6 BOUNDARY WALL 1,961,760 117,706 2,079,466

7 CC ROAD & DRAIN 1,288,473 77,308 1,365,781

94,027,271 5,641,637 99,668,908

Name of work: Construction of Kalinga Model Residential School at Kuchinda, Dist. Sambalpur, Odisha

NIT No. DLI/CON/749A/562

ABSTRACT SHEET

Grand Total

EPI 2 SIGN AND STAMP OF BIDDER

SlNo Description of Work Total Qty Unit Rate Amount

1 2 3 4 5 6

1a Excavation in ordinary soil for foundation including dressing

and levelling the bed and depositing the soil within 50m.

initial lead and 1.5m.initial lift including rough dressing and

breaking clods to maximum 5cm. to 7cm. and laying in layer

3999.21 Cum 89.20 356729.11

b Earth work in hard soil within 50m initial lead & 1.5m initial

lift including dressing, levelling & breaking clods to

maximum 5cm to 7cm & laying in layers not exceeding 0.3m

in depth & as per specification & direction of Department.

c Earth work in stoney earth & gravels mixed with stone

boulders not exceeding 0.014 cum in volume within 50m

initial lead & 1.50m lift including dressing, levelling &

breaking clods to maximum 5cm to 7cm & laying in layers

not exceeding 0.3m in depth & as per specification &

direction of Department.

d Excavation of foundation in laterite rock or any hard rock

(other than granite or disintegrated rock) removed by

chiselling including dressing & levelling & benching the bed

not exceeding 1.50m depth & depositing the soil within initial

lead of 50m & as per specification approved by the

department.

2 Supplying and filling in foundation trenches and plinth,

ditches with sand well watered and rammed in layers not

exceeding 23 cm. In depth with all lead and lift including

cost, conveyance, loading, unloading, royalties and taxes of

all materials, cost of all labour, sundries, T&P required for

the work etc. complete in all respect as directed by the

Engineer-in-Charge. Measurement will be taken on finished

compacted section only).

2093.01 Cum 263.40 551298.28

4 Filling foundation trenches and Plinth with excavated &

selected earth, laying in layers not exceeding 23cm thick

well watered & rammed etc. complete including labour ,

T&P, lead & lift cost & conveyance, loading, unloading etc.

complete as per specification & direction of EIC.

i Filling in foundation of buildings 1333.07 Cum 59.47 79273.14

5 Providing and laying P.C.C. (1:3:6) in foundation trench and

below flooring using 40mm down graded chrusher broken

HG Metal, including compaction, curing including cost of all

materials and labour etc. complete as per direction of

Engineer- In -Charge.

726.98 Cum 4206.90 3058335.82

6 Fly ash brick masonry using Fly ash bricks of size 25cm x

12 cm x 8 cm having crushing strength not less than 75 kg.

Per Sqr. Cm. In cement mortar of mix(1:6) with cement and

screened and washed sharp sand for mortar after

immersing the bricks for 6 (six) hours in water before use in

foundation, plinth, basement and for ornamental flower

beds, plinth moulding and similar such type of works with all

necessary projections, splays cutting, circular moulding,

corbelling, chamfering, watering and curing etc. including

cost, conveyance, loading unloading, royalties and taxes of

all materials and cost of all labour, sundries, T & P required

for the works etc. complete in all respect as directed by the

Engineer-in-Charge.

250.38 Cum 3797.50 950820.68

CIVIL ESTIMATE



7 R.C.C. work of M20 using 20mm and down graded hard

granite crusher broken chipes including

laying,hosting,centring & shuttering with all cost,conveyance

of material etc.complete.

I FOUNDATION & PLINTH

Footing & Pedestal 508.18 Cum 5158.72 2621571.99

Column Upto plinth 51.56 Cum 5158.72 265996.58

Plinth beam 237.80 Cum 5873.10 1396602.15

II SUPERSTRUCTURE

Column in superstructure

GF 153.20 Cum 8689.10 1331191.84

FF 147.56 Cum 10157.30 1498806.11

Head Room 5.97 Cum 11233.50 67097.70

Roof beam

GF 180.55 Cum 8689.10 1568800.18

FF 170.56 Cum 10157.30 1732474.43

Head Room 9.73 Cum 11233.50 109292.48

Lintel

GF 26.99 Cum 8197.10 221236.84

FF 18.07 Cum 8883.90 160515.36

Head Room 0.29 Cum 9705.70 2795.24

Roof slab

GF 516.63 Cum 8555.70 4420165.77

FF 492.41 Cum 9314.30 4586433.53

Head Room 20.46 Cum 10222.50 209134.50

Chajja

GF 134.94 Sqm 679.70 91716.68

FF 124.44 Sqm 753.73 93795.87

Staircase

GF 23.14 Cum 8227.80 190383.43

FF 23.14 Cum 8920.30 206407.22

8 Supply M.S. reinforcement for R.C.C. work including cutting,

bending, binding and tying the grills and placing in position

including cost of reinforcement and binding wire 18 to 20

gauge.

GF 2250.00 Qntl. 5057.30 11378909.50

FF 1290.17 Qntl. 5071.60 6543221.81

Head Room 56.44 Qntl. 5080.50 286761.57

9 Fly ash brick masonry using Fly ash bricks of size 25 cm. x

12 cm. x 8 cm. having crushing strength not less than 75 kg.

Per Sqr. Cm. in cement mortar of mix (1:6) with cement after

immersing the bricks for 6 (Six) hours in water before use in

superstructure including splays cutting, circular moulding,

corbelling, chamfering and similar such type of works,

watering and curing etc. including cost, coveyance, loading

and unloading, royalties and taxes of all materials and cost

of all labour, scaffolding, sundries, T&P required for the

works etc. complete in all respect as directed by the

Engineer-in-charge.

GF 1523.88 Cum 3830.80 5837697.60

FF 1359.10 Cum 3993.70 5427843.56

Head Room & Parapet 277.12 Cum 4181.10 1158659.14



10 12 m.m thick cement plaster in cement mortar of mix (1:6) in

all floors at all height using screened & washed sharp river

sand for mortar with approved quality of cement, finished

smooth to the even surface of the brick masonry walls after

racking out the joints properly ,providing grooves wherever

necessary including cost, conveyance, loading,

unloading,stacking, royalties and taxes of all Materials, cost

of all Labour, T&P, Sundries , Scaffolding, Watering,

Curing,Rounding of corners etc. required for the work

complete etc. as directed by the Engineer- in -charge.

GF 7385.66 Sqm 132.40 977861.45

FF 6228.58 Sqm 135.40 843350.10

Head Room 1165.61 Sqm 138.50 161436.62




smooth to the rough surface of the brick masonry walls

after racking out the joints properly ,providing grooves

wherever necessary including cost, conveyance, loading,

unloading,stacking, royalties and taxes of all Materials, cost

of all Labour, T&P, Sundries , Scaffolding, Watering,



GF 6551.86 Sqm 138.90 910053.90

FF 6259.94 Sqm 141.90 888285.99

Head Room & Parapet 1332.70 Sqm 144.90 193108.40



sand for mortar with approved quality of cement to the

ceiling of the Roof Slab, Staircase, Beams,

Columns,Landings, Railings,Chajja ,Fins ,Walls ,Jally and

Shelves etc. including roughening, scraping, chiseling,

cleaning, closed deep chipping with slurry treatment and

finished smooth to all R.C.C. Surface including cost,

conveyance, loading, unloading, royalties ,stacking and

taxes of all Materials, cost of all Labour,Sundries, T&P,

Scaffolding,Watering, Curing etc. complete in all respect as

directed by the Engineer- in- charge

GF 4596.58 Sqm 109.50 503325.80

FF 3720.11 Sqm 111.80 415908.04

Head Room 143.92 Sqm 114.20 16436.03

13 2.5cm. thick grading concrete (1:2:2)on roof slab with 6mm.

Size on new work crusher broken hard Granite chips

including cost of all labour, materials with all taxes, lead, T &

P etc all complete.

4307.89 Sqm 235.97 1016546.99

14 Painting two coats of plastic emulsion paint with primer &

putty on interior wall surface and applying sand paper to

smooth the surface of reputed make including cost of all

material labour scafolding T&P etc all complete as directed

by engg. on Charge.

28259.37 Sqm 154.90 4377375.71

15 Providing two coats of weather coat over a coat of Priming

(with water based Exterior Primer)of approved quality and

colour, using the required quantity of paint as specified by

the manufecturer to give all external surface over the

finished plaster surface including watering the surface

before applying and curing for the required period as

directed by the Engineer-in-charge including cost of all

materials with taxes and transportation, all labour,

scaffolding, sundries, T&P etc. complete.

6862.61 Sqm 94.73 650101.15



16 Providing and fixing 200 x 200 x 6 mm glazed ceramic tiles

in all walls up to required height from the floor level of

approved make and shade in dado/ skirting fixed in neat

cement slurry after soaking the tiles in water over the base

of 12mm thick cement plaster(1:3) with white cement pointing in

joints including, washing and cleaning with oxalic acid etc.

complete including cost of all materials, transportation and taxes, all

labour, sundries, T&P, watering and curing etc. complete as

directed by Engineer -In-Charge.

GF 1439.69 Sqm 680.80 980138.77

FF 1324.22 Sqm 689.40 912917.54

17 Providing and laying CERAMIC TILES of any approved

make & shade in flooring on a bed of 25mm thick cement

mortar 1:1 (1 Cement :1 Coarse sand) finished with flush

pointing in white cement & pigment to match the shade of

the tiles.G floor

GF 418.28 Sqm 763.90 319522.88

FF 342.91 Sqm 769.60 263902.72

18 Fixing of interlocking blocks of 75mm thick of approved

pattern & shade over 75mm thick bed of sand.

GF 128.47 Sqm 989.20 127080.07

19 Providing, Fitting & Fixing of 8 mm. to 12mm. thick

Vitrified Tile ( of size 600 m.m x 600 m.m ) or equivalent

make confirming to IS specifications having minimum

breaking strength 1400 kg/sq.cm in flooring in all floors at

all heights on 25mm thick bed of cement mortar(1:4) to

proper slope, line and level including cutting to required size

and shape, fixing at corners and splays etc. including filling

the joints with silicon sealant to match the shade of

Vitrified Tile as per the design & drawing including cost,

conveyance, loading, unloading, stacking,royalties and

taxes of all materials, cost of all labour, T & P, sundries,

watering & curing etc. required for the work complete in all

respect as directed by the Engineer-in-Charge.

GF 103.38 Sqm 1070.60 110677.05

20 Providing vitrified tile flooring using Anti skid / vitrified tiles of

premium grade having thickness of 8 to 10mm conforming

to IS 13756 of 600mmX600mm colour/printed series

(homogeneous) of approved quality,colour or equivalent in

dados & skirting on 12mm thick bed of cement mortar of

mix (1:3) laid in proper slope and gradient with screened

and washed sharp sand for mortar and grouted with

required quantities of pigments of approved marks to match

the shades of the vitrified tile if required watering and curing

for 21 days including

cost,conveyance,loading,unloading,royalties and taxes of all

materials,cost of all labour,sundries,T & P required for the

work complete in all respect as directed by the Engineer-in-

charge.

GF 9.60 Sqm 1023.20 9818.61

21 Providing 40mm thick A.S. Flooring in C.C. 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate ) including

cost,conveyance,loading,unloading,royalties and taxes of all

materials,cost of all labour,sundries,T & P required for the

work complete in all respect as directed by the Engineer-in-

charge.

GF 3377.60 Sqm 352.50 1190604.64

FF 3163.54 Sqm 360.70 1141088.45



22 Supplying, fitting and fixing M.S. grill made out of structural

steel, flats, plates, bars, confirming to IS specification for

windows, ventilators etc. as per drawing and design, fixed to

walls with clamps including 1 priming coat with approved

metal primer and making good to all damages in walls and

floors etc. including cost of all materials, labour,

conveyance, taxes, royalties, scaffolding, sundries, tools

and plants, etc., complete as per the direction of the

Engineer-in-charge.

15770.88 kg 71.10 1121309.44

23 Providing & fittiing up of fixed ventilator/fixed windows /

partition walling using OEL aluminum anodized section

No.9210 &9207 as single groov and double groov

respectively as horizontal &vertical member and OEL

section 4660 as Tapered clip for fixing up of 5mm thick

black glass and jointing angle No.1855 etc complete as per

direction of Engg. in charge.

366.56 kg 437.00 160185.58

24 Supplying, fitting and fixing of Stainless steel of 304 grade in

hand railing using 50mm dia of 2mm thick circular pipe with

Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C

and stainless square pipe bracing of size 32mm x 32mm x

2mm in 3 rows in stair case as per approved design and

specification, buffing, polishing etc with cost, conveyance,

taxes of all materials, labour, T&P etc. required for the

complete in all respect.

GF 50.54 Rmt 3358.00 169700.56

FF 50.54 Rmt 3360.90 169847.11

25 Providing and painting two coats with synthetic enamel paint

of approved quality and approved shade confirmming to ISI

on steel work to give an even shade in all floors at all height

over a coat of primer of approved quality and shade

including sand papering and making the surface smooth

with cost, coveyance, loading and unloading, and taxes of

all materials, cost of all labour, sundries, T&P, scaffolding

etc. required for the work and complete in all respect as

directed by Engineer-in-charge.

580.93 Sqm 127.80 74243.11



26 Providing & fixing of Dressed seasoned sal wood Chowkath

work framed and fixed (wrought and put up ) in doors

includes all material, labour, tools and plant , tax as per

drawing and directed by Engineer-in-charge.

6.70 Cum 68202.92 457285.23

27 Providing & fixing in position at any location 32 mm thick

ISI marked factory made solid core block board flush door

confirming to IS:2202, Part-1 hot pressed shutter of

approved make both side commercial with well matched

teak 3 ply veneering with vertical grains / cross bands and

face veneers on both faces of shutter of approved make &

quality bounded with phenol formal dehyde synthetic resin,

leaping around complete as specified with lamination of 1

mm thick of approved shade /make & as directed cost

includes of all hardware fitting like cylindrical lock , door

stopper, stainless steel tower bolt, stainless steel hinges, of

approved make etc. cost includes all material, labour, tools

and plant , tax as per drawing and directed by Engineer-in-

charge.

376.10 Sqm 5509.00 2071940.41

28 Providing and fixing 30mm thick “Rajshri”BRAND FACTORY

MADE SINGLE SIDE PANEL PVC DOOR SHUTTER

consisting of frame made from M.S. tubes of 19 gauge

thickness, size 19x19mm forstyiles and 15x15mm for top

and bottom rails. The M.S frame shall have a coat of steel

primers . The M.S frame shall have covered with heat

moulded Rajshri single side prelam PVC “C” channel of

5mm thick sheet and 30x50mm wide to formstyiles and

5mm thick and 75mm wide single side prelam sheet for top

rail, lock rail and bottom rail on other side and 5mm thick,

20mm wide cross PVC sheet as gap insert for top rail and

bottom rail, paneling of 5mm thick PVC sheet fitted in the

M.S. frame welded / sealed to the styles and rails with

5x30mm PVC sheet beading on either side and joined

together with solvent cement adhesive etc., complete as per

manufacturers specification including fixing frames with 4

Nos. M.S. powder coated butt hinges complete including

one 10inch aluminium aldrop and two aluminium tower

bolts of 10 inch and 6 inch and two aluminium handles cost

of all materials, conveyance, loading, unloading, and taxes

of all materials, cost of all labour, sundries, T&P required for

275.47 Sqm. 2503.00 689495.15

29 Providing & fixing factory made (Make :-Rajshri) internal

PVC door frame of size 100mmx45mm with wall thickness

of 5mm made out of extruded 5mm PVC foam sheet , meter

cut at two corner & joined with two numbers 150mm long

bracket of 15mmx15mm squire tube. The two vertical door

profile are to be reinforced with 40mm x20mm tube of 19

gauge throughout the frame. The door frame shall be fixed

to the wall using 65/100mm long MS screws through the

frame by using PVC fasteners. A minimum of 4 numbers of

screws to be provided for is vertical member & minimum two

numbers for horizontal members etc. complete as per

specification and direction of Engineer –in-charge.

865.76 Rmt 339.50 293923.82

30 Supplying, fitting, fixing up powder coated sliding window

made up aluminum Section 9778 , as windows frame

section No.4095,4096 and 9777,3994 as shutter frame with

5mm thick black glass as panel fitted with rubber bending

including locking arrangement including all fitting including

cost of materials all taxes labour, T&P (Including cost of

Glass) etc. complete as per direction of Engineer-in-charge.

580.93 Sqm 3500.00 2033262.00

79,654,701.46

79,654,701.00

Total

SayEPI 8 SIGN AND STAMP OF BIDDER

SlNo Description of Work Qty Unit Rate Amount

1 2 3 4 5 6

ELECTRICAL WORK ( INTERNAL )

I Wiring

1 Wiring to light, ceiling fan, exhaust fan, call bell, 5 A

plug & computer plug points with 1.5sqmm FRLS PVC

insulated 1100 volt grade multistranded copper

conductor wire for phase, neutral and earth continuity

conductor run inside 2mm PVC 20mm/25mm dia

conduit pipe ( ISI mark ) recessed in wall/ column/

ceiling of the building including supply of materials

such as clip-in type modular switches, metallic

concealed box, wire, ceiling rose, angle / batten

holder, junction box etc as per technical specifications

complete with making good the damages caused as

required and as per direction of Engineer-in-charge.

a Single light point controlled by one 5A switch or first

light point of group control.

530 Each 757.00 401210.00

b Ceiling fan point with ceiling fan hook box. (Space

shall be provided for installation of electronic fan

regulator & the blank space should be plugged by

blank plates)

130 Each 757.00 98410.00

c Exhaust fan point 20 Each 757.00 15140.00

d 10A plug on same board 100 Each 800.00 80000.00

e 2x10A plug for computer plug outlet 60 Each 1120.00 67200.00

2 Wiring to light, ceiling fan, exhaust fan, call bell, 5 A

plug & computer plug points with 1.5sqmm FRLS PVC

insulated 1100 volt grade multistranded copper

conductor wire for phase, neutral and earth continuity

conductor run inside 2mm PVC 20mm/25mm dia

conduit pipe ( ISI mark ) recessed in wall/ column/

ceiling of the building including supply of materials

such as clip-in type modular switches, metallic

concealed box, wire, ceiling rose, angle / batten

holder, junction box etc as per technical specifications

complete with making good the damages caused as

required and as per direction of Engineer-in-charge.

a Single light point controlled by one 5A switch or first

light point of group control.

1454 Each 569.00 827326.00

b Ceiling fan point with ceiling fan hook box. (Space

shall be provided for installation of electronic fan

regulator & the blank space should be plugged by

blank plates)

266 Each 569.00 151354.00

c Exhaust fan point 24 Each 569.00 13656.00

d 10A plug on same board 252 Each 600.00 151200.00

ELECTRICAL ESTIMATE



3 Wiring for circuits and submain with following

number & sizes of FRLS PVC insulated 1100 volt

grade multistranded copper conductor wire run inside

2mm PVC 20mm dia conduit pipe ( ISI mark )

recessed in ceiling/ column/ walls of building including

supply of all materials such as wires, m.s. junction

box & pull box etc complete with making good the

damages caused as required and as per direction of

Engineer-in-charge.

a

2 numbers single core 6 sqmm copper wire for phase

& neutral and 1 number single core 2.5sqmm copper

wire for earth continuity conductor.(from Panel to DB)

680 Metre 310.00 210800.00

b 1 numbers single core 2.5 sqmm copper wire for

phase & neutral and 1 number single core 1.5 sqmm

copper wire for earth continuity conductor(Normal

Power Connection ).

1350 Metre 107.00 144450.00

subtotal I 2,160,746.00

II CABLING

1 Supply, laying & testing of following size of PVC

insulated, PVC sheathed, round/strip armoured

aluminium conductor power cable of 1100 volt grade

clamped as required and laid on surface of wall/

column/ existing RCC/ stone ware/ masonry cable

trench/ cable trey/ through G.I. pipe/ hume pipe as the

case may be, including cost of saddles/ clamps/

markers etc and cable end termination but excluding

the cost of G. I. pipe/ hume pipe complete with

making good the damages caused and as required

and as per direction of Engineer-in-charge.

a 1 Runs 3.5 core x 150 sqmm AYFY( from Main Panel

to Subpanel )

120 Metre 905.00 108600.00

b 1 Runs 3.5 core x 240 sqmm AYFY( from Transformer

to Mainpanel )

50 Metre 1419.00 70950.00

c 1 Runs 3.5 core x 50 sqmm AYFY( from Main Panel to

Subpanel )

300 Metre 362.00 108600.00

d 1 Runs 3.5 core x 25 sqmm AYFY( from Main Panel to

Subpanel )

150 Metre 232.00 34800.00

subtotal II 322,950.00

III PANELS

1 Supply, delivery, installation, testing & commissioning

of L.T. indoor floor/ wall mounted type distribution

boards made out of 2 mm thick CR sheet metal

cubicle fixed on m.s. channel base, duly acid treated

for derusting, primered and painted with 2 coats of

enamel paint of approved shade; dust, damp & vermin

proof ; having hinged door and compartmental

arrangement for each equipment & busbar chamber

on the top of the panel running horizontally; having

provision for cable/ conduit entry, earthing studs as per

specification mentioned below duly factory wired

conforming to the relevant ISS and as per special

conditions of contract making good the damages

caused complete as per the direction of Engineer-in-

charge.

a Academic Block Distribution Board



NS-1 10way SPN DB

A INCOMER

i) 1 No. 25A DP RCBO.

ii)Class-C transient voltage suppression devices suitable

for 1 phase as per specification

B OUTGOINGS

10 nos.10A / 16A / 20A SP MCB (10KA) as required

Neutral link:

Separate for each outgoing

Earthing Terminals:

Earthing terminals suitable for 10 Nos. outgoing. 36 Nos. 12500.00 450000

NS-2 6 way SPN DB

A INCOMER

i) 1 No. 25A DP RCBO.

ii)Class-C transient voltage suppression devices suitable

for 1 phase as per specification

B OUTGOINGS

6 nos.10A / 16A / 20A SP MCB (10KA) as required

Neutral link:

Separate for each outgoing

Earthing Terminals:

Earthing terminals suitable for 6 Nos. outgoing. 6 Nos. 9500.00 57000

2 Sub Main Panel (Academic Building)

A INCOMER

1 No. 200 amps 4P MCCB(25 KA) with thermal

Magnetic release (PRMB-3) with Class-C transient

voltage surge suppression device suitable for 3

phases as per specifications.

B METERING & INDICATION for each Incomer

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos.

2A SP MCB

iii) 1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A

CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

C BUS-BAR

i) 1 Set of 300A TPN Aluminium Bus Bar with colour

coded PVC Sleeves

D OUTGOINGS

i) 12 Nos. 40A DP MCB (10 KA)

ii) 2 Nos. 40A 4P MCB (10 KA)

Sub Main Panel as described above 1 Nos. 95000.00 95000

3 Sub Main Panel (Boys Hostel) Typical For Girls

HostelA INCOMER








2A SP MCB


CT's


C BUS-BAR


coded PVC Sleeves



D OUTGOINGS




4 Sub Main Panel (CCA Building)

A INCOMER








2A SP MCB


CT's


C BUS-BAR


coded PVC Sleeves

D OUTGOINGS




5 Main Panel

Design, fabrication, assembly, wiring and supply of

front operated dead front cubicle type

compartmentalised as per Form 3B, rear access free

standing, dust and vermin proof (IP 42 ingress

protection) main switchboards suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system suitable for a

symmetrical fault level of 25 kA at 415 volts, fabricated

from 2 mm thick CRCA MS sheets with hinged,

gasketted (metal based neoprene) and lockable doors

having structural reinforcement with suitable

angle/channel/T/flat sections including 3 mm thick

gland plates on top and bottom and including lifting

hooks and including GI earth strip of required size with

2 nos earthing terminals and including powder coated

paint finish of approved shade over metal surface

cleaned and treated with seven tank process complete

with interconnections etc as per specifications, as

required and as below.

A INCOMER

1 No. 400 amps 4P MCCB(25 KA) with protection

release (PRMB-3) with Class-C transient voltage surge

suppression device suitable for 3 phases as per

specifications.




2A SP MCB


CT's


C BUS-BAR


coded PVC Sleeves

D OUTGOINGS

i) 1 No. 200A TP+NL MCCB (25 KA)



ii) 2 Nos. 100A TP+NL MCCB (25 KA)

iii) 1 No. 63A TP+NL MCCB (25 KA)

iv) 1 No. 63A 4P MCB (10 KA)

v) 1 No. 40A 4P MCB (10 KA)

Main Panel as described above 1 Nos. 320000.00 320000

subtotal III 1,077,000.00

IV Earthing

1 Supply of materials and installation of pipe earth

electrode made out of 50mm dia class B G.I. pipe of

3.0 metre long with arrangements for fitting/

termination of G.I. flat / wire with G. I. nut bolts &

washers including cost of charcoal, salt, foreign soil,

water pouring arrangements, brick masonary

enclosure on top with removable RCC cover complete

with labour for excavation of pit in all kinds of soil &

rock as required and as per direction of Engineer-in-

charge.

12 Each 2336.00 28032.00

2 Supply of materials and laying under ground/ floor/ wall

including making connection at both ends and testing

with following size of hot dip galvanised iron flats for

earthing of equipments, switch boards & panels as

required comlete as per direction of Engineer-in-

charge.

a No 6 SWG G I wire 540 Mtr 17.00 9180.00

subtotal IV 37212.00

V Fittings & Fixtures ( Internal Building )

Supply, delivery, installation and testing of following

types of fluorescent/ CFL tube fitting and fixtures

directly on wall / ceiling/ false ceiling of building with

all accessories such as electronics ballast, fluorescent

tube lights, stove enamelled box, sheet cover etc

complete assembly including supply & fixing of teak

wood round block / PVC square block/ channels or

direct fixied on wall as per suitable condition and

making connection from the suitable point outlet with

flexible wire and complete as per the direction of

Engineer-in-charge.

1 1 x 40 W ( T 5) wall mounted decorative Fittings refer

to Philips cat no : TWG 128 / 2005/865 & 840 or

equivalent type fittings with lamp

1390 Nos. 850.00 1181500.00

2 1 x 18 W CFL for fixing on existing angle holder and

complete with all respect as per the instruction of

engg-in-charge / consultant .

594 Nos. 150.00 89100.00

3 Supply, delivery, installation and testing of following

sweeps of a.c. ceiling fan complete with fan blades,

down rod, canopies, capacitor etc including supply of

sundry materials, making connection from the suitable

point outlet but excluding cost of fan regulator

complete as required and as per the direction of

Engineer-in-charge.

a 900 mm sweep 178 Nos. 2150.00 382700.00



OSR-1.38 Supply, delivery, installation and testing of clip-in

modular type 400 watt electronic fan regulator

(stepped type) on switch board complete as required

and as per direction of Engineer-in-charge.

178 Nos. 50.00 8900.00

5 Supply, delivery, installation & testing of following

sweeps and speed of exhaust fans suitable for

operation at 250 volt, 50 Hz, a.c. supply complete with

a set of propeller blade, tripod leg for mounting of

motor, ring frame, blades, gravity louvre complete

assembly including supply of sundry materials, making

hole of suitable size for housing of exhaust fan,

making connection from suitable point outlet, making

good the damages caused complete as required and

as per direction of Engineer-in-charge.

a 300mm sweep, 900 rpm. 32 Nos. 3800.00 121600.00

6.00 Supply, delivery, installation & testing of ding-dong

type call bell with remote control and complete

including supply of sundry materials, making

connection from suitable point outlet, making good the

damages caused complete as required and as per

direction of Engineer-in-charge.

4 Nos. 123.00 492.00

subtotal V 1784292.00

VI FIRE ALARM SYSTEM (ACADEMIC BUILDING)

Sub-Head : FIRE ALARM SYSTEM

Supply, installation, testing & commissioning of

conventional Fire Alarm system with 2 zone

complete with indication of fire fault, short , open and

with battery charger indictaion , and panel should be

with battery backup and power amplifer of 600

watt and sufficent wattage for P.A system with

microphone unit inclosed in one housing complete as

required. with certification of EN/ CE

1 Nos. 15000 15000

Supply, installation, testing and commissioning of

Manual Call Point - Resettable type - with back box

complete as required

8 Nos. 1250 10000

Supply, installation, testing and commissioning of

Conventional type hooter wall mounted type rated

at 90 dBA @ 1m for Audible annunciation.

8 Nos. 1250 10000

Supplying and drawing following sizes of FRLS PVC

insulated copper conductor, single core cable in the

existing surface/ recessed steel/ PVC conduit as

required.

2 x 1.5 sq. mm 500 Metre 47 23500

Supplying and fixing of following sizes of steel conduit

along with accessories in surface/recess including

painting in case of surface conduit, or cutting the wall

and making good the same in case of recessed

conduit as required.

25 mm 500 Metre 115 57500

subtotal VI 116,000.00

VII AREA LIGHTING

1 Supplying & installation, testing and commissioning of

prewired, surface mounted wall step light fittings with

9Watt spot light

5 Nos. 1500.00 7500.00




prewired, 120W LED FLOOD LIGHT fittings for area

(CG cat No: LSFO-120-CDL or equivalent ). This

luminaire consists ofpressure dia cast housing /

efficient high output emitter LED better distribution /

IP 65 potection / or any other equivallent reputed

make ISI marked as approved) with all accessories

and tubes etc. directly on foundation base including

connections with 3 core x 2.5 sq mm PVC insulated &

PVC round Sheathed, copper conductor, flexible cable

etc.as required and complete with al respect as per

the direction of Engineer - in charge or consultant or

Owner .

5 Nos. 12500.00 62500.00


prewired, 10W LED BOLLRD LIGHT fittings for

patway (CG cat No: LBLS-10-CDL or equivalent ).

This luminaire consists of inverted pyramid tripod type

LED bollard / better reflection for proper distribution /

IP 65 potection / or any other equivallent reputed

make ISI marked as approved) with all accessories

and tubes etc. directly on foundation base including





Owner .

20 Nos. 8,200.00 164000.00

4 S/F of 200 mm x 150 mm x 60 mm (nominal) size

metallic looping end box with hinged cover having one

no. 20 A rating moulded fuse base & holder, 4 A NS

type fuse and 4 way connector to be used in the

bottom of street light pole for cable termination

80 Nos. 500 40000.00


prewired, 60W LED STREET LIGHT fittings (CG cat

No: LST 0-60-CDL orequivalent ). Streetlight

luminaire with pressure dia cast aluminum housing /

heat resistant glass / better reflection for proper

distribution with IP 65 potection -refer to IS 3553-1956

or any other equivallent reputed make ISI marked as

approved) with all accessories and tubes etc. directly

on wall / pole on M S clamp , nutbolt etc including





Owner .( for Road site ) Pole cost is included in the

item.

40 Nos. 18,000 720000.00

6 Supply and fixing of 2.5mm2

PVC Twin core COPPER

wire for connecting to street light fittings

1000 Metre 65.00 65000.00

7 Spply and installation of 6 mm2

twin core aluminium

armoured U.G cable of ISI marked

100 Metre 115.00 11500.00

subtotal VII 1,070,500.00

Total 6,568,700.00

Say 6,568,700.00


3.1.5 Supplying all materials, labours, T&P for laying of

following dia CPVC pipes S.D.R. - 11 as per IS-15778

with ISI mark up to 2nd floor including fixing of

required size CPVC fittings like bend, Tee, elbow,

offsets etc. and the same fixed on wall or floor with

holder bat clamps screw etc. including testing the

joints with required water pressure. The cost inclusive

of all taxes, duties, transportation, scaffolding etc. as

per specification and direction of Engineer-in-charge.

(II) 20mm dia Mtr 905.01 132.40 119822.79

(III) 25mm dia Mtr 225.00 172.80 38880.00

(IV) 32mm dia Mtr 170.00 223.40 37978.00

(V) 40mm dia Mtr 90.00 310.50 27945.00

3.2.17

Providing all material, labour, T&P for fitting & fixing of

following water supply fittings confirming to IS-15778

with ISI mark as per ASTM D-2846 up to 2nd floor

with jointing materials etc. including testing the joints

with required water pressure. The cost inclusive of all

taxes, duties, transportation, scaffolding etc. all

complete as per specification & direction of EIC.

(III) 25mm dia Ball Valve Each 28.00 548 15344.00

(IV) 32mm dia Ball Valve Each 28.00 975 27291.60

(V) 40mm dia Ball Valve Each 8.00 1080 8640.00

3.1.13 Providing all materials, labour, T&P for laying of

following dia UPVC pipes as per IS-4985 with ISI

mark including fixing of requird size UPVC fittings like

bend, Tee, Elbow, Offsets etc, and the same fixed on

wall or foor with holder, bat calmps, screw etc,

including testing the joints with required water

pressure. the cost inclusive of all taxes duties,

transportation, scaffolding etc as er secification and

directio of EIC.

a 40mm dia pipe Mtr 233.00 44.20 10298.60

3.1.10 Providing all labour, T&P for cutting holes in bricks or

stone masonry wall up to 2nd floor for taking pipes

and making good the damages with cement concrete

1:2:4 finished smooth with CP 1:4 to original shape

inclding cost of all materials, curing, conveyance,

taxes, duties etc. all complete as per specification &

direction of EIC,

(I) For 15mm to 50mm dia pipe to pass in 125mm to

250mm thick wall

Each 150.00 27.70 4155.00

3.1.11 Providing all labour, T&P for cutting holes in RCC

chajja/roof/floor up to 2nd floor for taking GI/PVC

pipes through and making good the damages with

supply of all required materials etc. complete as per

specification & direction of EIC,

Each 95.00 87.10 8274.50

3.4.1 (II) Providing all materials, labour & T&P for fitting and

fixing of white glazed vitreous china water closet

(Orissa pattern) of size 580mm x 440mm of approved

make as per IS-2556 with ISI mark up to 2nd floor

fixing on the floor with 32mm PVC long flush bend,

duly embedded in cement concrete (1:4:8) using 4 cm

H.G. Metal, M.S. brackets, cutting the floor and wall

including mending good the damages, including cost

of all materials as per specification and direction of

Engineer-In-Charge.

Each 15.00 1525.00 22875.00

Amount

(sch)

Amount

(Non sch)

PLUMBING WORK

OSR/DSR

NO.Description of Items Unit

Total

QtyRate


Amount

(sch)

Amount

(Non sch)

OSR/DSR


Total

QtyRate

DSR

17.3.1

Supplying all materials, labours, T&P required for

fitting and fixing of white glazed vitreous china

Europian Water closet with S Trap of approved type

as per IS-2556 with ISI mark to the floor with wooden

plug and chromium plated pedestal screws including

jointing the trap with soil pipe in cement mortar (1:1)

fixing plastic seat cover for water closet with CP brass

hings & rubber buffer etc. all complete with cost of

taxes and conveyance as per the direction of

Engineer-in-charge.

Each 76.00 4593.75 349125.00

3.4.6 Providing all materials, labours, and T&P for fitting

and fixing of PVC low level cistern complete with all

internal fittings of approved make as per IS-7231 with

ISI mark and providing necessary PVC wall plug,

screws and 15mm dia PVC water connecting pipe

with union at each end etc. as per specification all

complete as per direction of Engineer-In-Charge.

Each 15.00 1432.00 21480.00

NS Supplying and fixing of white glazed vitreous china

Urinal of approved size including cost of water

spreader & Bottle trap. All complete with cost of

conveyance & taxes, materials, labours, T&P etc. as

per the direction of Engineer-in-charge.

Each 12.00 9500.00 114000.00

3.4.32 Providing and fixing frosted safety glass Urinal

partition of size 450x900mm for standing urinal of

Jaquar complete including cutting the wall and making

good the damages, including cost of all materials

complete as per PH specification and direction of

Engineering-in-charge.

Each 16.00 2545.00 40720.00

DSR

17.7.3

Supply all materials and labours for fitting and fixing of

following size white glazed vitreous china wash hand

basin of approved make as per IS-2556 with ISI mark

up to 2nd floor, supply & fixing of 32mm PVC waste

pipe, 15mm dia PVC water connection pipe, basin

bolts & nuts of approved quality including cutting the

walls & floors and making good the damages with

cement concrete (1:2:4) etc. with all taxes, duties,

transportation etc. all complete as per direction of

Engineer-In-Charge.

a 550mmx400mm size WHB Each 71.00 2095.30 148766.30

NS Supplying all materials, labour, T&P and fixing

standard sized CP Grab Bar 300mm Long complete

including cutting the wall and making good the

damages, including cost of all materials complete as

per PH specification and direction of Engineering-in-

charge.

Each 1 1500.00 1500.00

3.4.26 Supplying all materials, labour, T&P and fixing Mirror of superior glass mounted on 6mm thick A.C sheet or

plywood sheet and fixed to wooden plugs with CP

screws and washers complete as per specification

and direction of the Engineer in charge.

(I) 600mmx450mmx5mm thick bevelled edge mirror. Each 27.00 610.00 16470.00


Amount

(sch)

Amount

(Non sch)

OSR/DSR


Total

QtyRate

3.4.14(a) Providing all materials and labour for fitting and fixing

of following sizes of Stainless Steel Kitchen Sink

made out of 0.8mm thick sheet with coupling &

strainer, up to 2nd floor the flat boards for correct

sandwitch between the platform top & grinite/marble

slab & making good the damages, fixing of 32mm dia

PVC waste pipe etc. incluing testing, comissioning all

complete as per specification & direction of the

Engineer-in-charge.

Each 4.00 6480.60 25922.40

ORS/NS Providing all materials, labour, T&P and fittings and

fixing of different water supply (CP on Brass) up to

2nd floor fitting as per IS specification & approved

make of following sizes and specification with leak

proof threaded joints with spun yarn and white zinc or

any other method as required and directed including

all taxes, duties, transportation etc., testing and

rectification of defects after testing complete as per


3.2.14(IV) Short body Bib cock with wall flange Each 34.00 520.00 17680.00

3.2.14(VI) Long body Bib cock with wall flange Each 4.00 638.00 2552.00

3.2.16 (VI) Angle Stop cock with wall flange Each 220.00 480.00 105600.00

3.2.16 (V) Concealed Stop Cock Each 71.00 600.00 42600.00

3.4.21 (I) Pillar cock Each 71.00 637.00 45227.00

3.4.30(II) C.P. Soap Dish Holder Each 69.00 90.00 6210.00

NS Soap Dispenser Each 30.00 800.00 24000.00

3.4.29(I) Towel Ring with round flange Each 30.00 494.80 14844.00

3.4.28 (I) CP Towel Rail of 600mm long Each 71.00 926.40 65774.40

NSHealth Faucet with 1.00m long PVC tube & wall hook

Each 93.00 1400.00 130200.00

NS Stainless steel grating Each 190.00 550.00 104500.00

NS 101mm dia. Round Cockroach Guard Grating Each 7.00 650.00 4550.00

3.3.2 Supplying all materials, labour, T&P for fitting and

fixing of UPVC SWR pipes (Type-A) (Ringfit) up to

2nd floor of approved make confirming to IS

13592/1992, both below & above groud level or fixing

on wall surface in all floors including all taxes, duties,

transportation & scaffolding etc. all complete as per

specification & direction of the Engineer-in-charge.

(II) 110mm dia pipe Mtr 790.00 184.70 145913.00

(I) 75mm dia pipe Mtr 80.00 107.50 8600.00

NS Supplying all materials, labour, T&P for fitting and

fixing of the following dia UPVC SWR (Ringfit) fittings

up to 2nd floor of approved make confirming to IS

14735 with all taxes, duties, transportation & requisite

testing as per specification & direction of the Engineer-

in-charge.

1 110mmX87.5° PVC door bend Each 32.00 500.00 16000.00

2 110mmX45° PVC plain bend Each 33.00 320.00 10560.00

3 110mm dia Vent Cowl Each 33.00 90.00 2970.00

4 125mmx110mm 'P' Trap with lip ring Each 154.00 400.00 61600.00

5 110mm x 110mm 'P' Trap Each 61.00 300.00 18300.00

6 110 dia Nahani Trap with Jali Each 31.00 300.00 9300.00

7 110mm WC connector with lip ring Each 105.00 200.00 21000.00


Amount

(sch)

Amount

(Non sch)

OSR/DSR


Total

QtyRate

3.3.2 Supplying all materials, labour, T&P, fitting and fixing

UPVC SWR Rain water pipes (Type-A) (Ringfit) up to

3rd floor of approved makeconfirming to IS-

13592/1992, both below & above ground level or

fixing on wall surface in all floors including all taxes,

duties, transportation & scaffolding etc. all complete

as per specification & direction of Engineer-in-charge.

a 110mm dia. Pipe Mtr 320.00 184.70 59104.00

3.1.8 Supplying all materials,labour,T&P and fixing

Rotational moulded polyethylene cyndrical vertical

water storage tanks of 2000 ltr capacity confirming to

IS:12701-1996 including cutting holes through the

tank and fixing mild steel tubes and fittings and

providing extra sockets and jam nuts,fixing ball valve

etc,including hoisting upto a height of 6 mtr above

ground level and placing the tank to the required

position including conveyance of all materials to

worksite etc all complete as per specification and


Each 14.00 11246.00 157444.00

4.1.4 Providing and laying in trench cement concrete ( 1:3:6

) with 40mm size hard granite metal in the following

type of bedding for UPVC SWR pipes of the following

internal diameter including curing complete as per

specification & direction of EIC.

a 110mm dia Mtr 790.00 369.20 291668.00

DSR 19.4.1 Providing all material, labour, T&P and construction of

Gully Trap chamber of size as mentioned below with

250mm nominal size flyash Brick having crushing

strength not lessthan 75kg/sqcm in CM 1:4 over a

bed of 100mm thick C.C. (1:3:6) using 40mm size HG

metal, plastering with 12mm thick cement plaster with

cement punning in cement mortar 1:4 on inner

surface and 12mm thick cement plaster in cement

mortar (1:4) on extermal surface fitting and fixing of

pvc gully trap and pre cast factory made SFRC over

with frame of opening size 260mmx260mm moulding

and shaping the channel and benching with C.C.

(1:2:4) with hard granite chips 12mm size, earth work

excavation in all kinds of soil and rock, and filling the

cavity of the chamber with excavatd and selected

earth levling the surface around the chamber with

disposal of surplus earth with in 50m lead as per

specification, design & drawing including cost of

curing & all taxes, royality, cost, conveyance etc. all

complete as per specification and direction of

engineer in charge.

19.4.1.2 Inner size 300mmx300mmx450mm depth Gully Trap

chamber

Each 28.00 1619.55 45347.40


Amount

(sch)

Amount

(Non sch)

OSR/DSR


Total

QtyRate

DSR 19.30 Supplying all materials,labours,T&P and constructing

inspection chamber with Fly Ash bricks of size

25cmx12cmx8cm having crushing strength not less

than 75kg/Sqcm in C.M. (1:4) with cement concrete

(1:3:6) on bed with hard granite metal size 40mm of

150mm thick, 125mm thick RCC M25 cover slab with

supplying fitting and fixing of medium duty SFRC

(medium duty) manhole cover, moulding and shaping

the channel and benching with cement concrete

(1:2:4) using 12mm size hg chips, earth work

excavation in all kinds of soil/rock including back

filling with selected excavated earth duly watered &

rammed, 12mm thick cement plaster in cement mortar

(1:3) with punning to inside, cement plaster in CM

(1:3) to outside the chamber including centring,

shuttering, providing required quantity of MS rods and

binding wires for reinforcement, bending, binding,

tying the grills and placing in the proper position and

drawing and design and specification including cost,

conveyance, royalty, taxes etc for all materials all

complete as per the drawing, design and direction of

Engineer-in-charge.(As per IS 4111 P1-1967)

19.30.3 Inner size 750mmx750mmx500mm depth Each 11.00 6350.45 69854.95

3.2.13 Providing all materials, labour T&P for making Ferrule

connection of the following nominal bore including

drilling the water main (C-I pipe / DI Pipe) earth work

excavation in all kinds of soil, back-filling, de-watering

(If Required) with required CPVC pipe & fittings and

connection to existing pipe line all complete as per

specification and direction of EIC.

a 15/20mm dia nominal bore Each 8 785.2 6281.60

TOTAL OF INTERNAL PLUMBING 2008689 518480

Grand total 2527169


I

Providing and fixing black steel pipes to IS:1239

(Heavy class) including all fittings like anchor

fasteners, brick masonry supports, couplings,

bends, elbows, tees and flanges etc. welded or

screwed joints as required, cutting holes and

chases in brick or RCC walls and making good

complete.

1.1 25 mm dia Metre 40 405.00 16200

1.2 50 mm dia Metre 121.8 648.00 78900

1.3 65 mm dia Metre 700 804.00 562800

2

Providing and fixing first aid fire hose reel wall

mounting swinging type fitted with 36.5 M x 20

mm dia high pressure RUBBER hose to IS: with 5

mm outlet gunmetal nozzle with shut off valve

(IS:884-1969).

Each 28 8044 225232

0

3

Providing and fixing standard short size gunmetal

branch pipe with gunmetal nozzle 16 mm NB

outlet with standard instantaneous type 63 mm

dia coupling.

Each 28 1864 52192

0

4Providing and fixing standard fire man's axe with

heavy duty insulated rubber handle.Each 28 602 16856

0

5Providing and fixing single acting air valve with

screwed inlet 25 mm dia.Each 14 1157 16198

0

6

Providing and fixing fire hose cabinet fabricated

from 16 gauge M.S. Sheet with single or double

glazed front door (with 4 mm thick glass) and

locking arrangement, painted fire red with stove

enamelled paint "FIRE HOSE" written on front

including necessary supports approximate size.

0

a) 9000x750x750 mm deep. Each 28 6700 187600

0

7

Painting M.S. pipes and fittings two or more

coats of synthetic enamel paint of approved

quality and shade over a coat of ready mixed red

lead primer:

0

a) 25 mm dia Metre 40 27 1080

b) 50 mm dia Metre 100 35 3500

c) 65 mm dia Metre 700 40 28000

0

FIRE FIGHTING WORKS

S.

No.Description of items

UnitTotal

Qty.Rate Amount

FIRE SUPPRESSION SYSTEM


S.


UnitTotal

Qty.Rate Amount

8

Providing and fixing lever operated butterfly valve

conforming to IS:13095-91 including necessary

companion flanges, bolts and nuts complete.0

a) 65 mm dia Each 20 2000 40000

0

9

Providing and fixing cast iron double flanged

horizontal type non-return valves including nuts,

bolts, 3 mm thick insertion rubber gasket

complete to IS:5312 (PIN 1.6).

0

a) a)65mm dia Each 20 4050 81000

0

10

Providing and fixing dial type pressure gauge with

isolation cock and pipe at hydrant station. 0

a) Dia diameter 100 mm calibration 0-8 Kg. Each 20 705 14100

0

11

Providing and installing horizontal/vertical

monobloc centrifugal pumping set with

mechanical seal, C.I. volute and bronze impeller

connected to a TEFC induction motor suitable for

400/44 volts, 3 phase, 50 cycles A.C. supply with

150 mm dia pressure gauge with gunmetal

isolation cock, vibration eliminating pads for fire

pump at terrace level including motor control

panel at terrace level and remote push button for

OFF/ON operation in Fire Control Room. (Fire

pump on terrace)

0

Capacity 450 lpm 0

Head 40 m 0

HP 10 Each 3 44450 133350

0

12

Supplying, Installation, Testing and

Commissioning of double flanged vertical air

vessel fabricated shell from 8 mm thick & dished

ends 10 mm thick M.S.plate, 450 mm dia and 2.0

m high common for fire hydrant, pump complete

with two numbers pressure switches to operate

terrace booster pumps at drop of pressure as

given in the specifications.

Each 6 16000 96000

0

13

Providing and fixing resilient rubber neoprene

lined style arch vibration eliminators suitable for

raw water upto 45 deg. C. temperature working

pressure upto 8 Kg/Sqcm

0

a) 65 mm dia Each 3 2050 6150


S.


UnitTotal

Qty.Rate Amount

TOTAL FOR FIRE SUPPRESSION SYSTEM1559158

II HAND APPLIANCES

14

Providing and fixing CO2 type fire extinguishers

with steel cylinder with a discharge valve and

conforming to IS:15683. Extinguishers shall be

painted with rex enamel paint and fixed to wall

with brackets capacity 4.5 Kg.

Each 18 6400 115200

0

15

Providing and fixing water CO2 gas fire

extinguishers with steel cylinder with a discharge

valve and conforming to IS:940. Extinguishers

shall be painted with rex enamel paint and fixed

to wall with brackets capacity 9 litre.

Each 18 2350 42300

0

16

Providing and fixing ABC powder type fire

extinguisher suitable for inverted operation and

fabricated from 1.6 mm M.S. sheet internally

protected with anticorrosive treatment and

hydraulically tested to a pressure of 25 Kg/Sqcm.

Extinguishers externally painted with red enamel

and fixed to wall with brackets complete with

internal charge and spanner (Conforming to

IS:13849 capaicity 6 Kg.).

Each 18 3550 63900

TOTAL FOR HAND APPLIANCES 221400

1780558GRAND TOTAL FOR FIRE FIGHTING =


SlNo Description of WorkTotal

QtyUnit Rate Amount

1 2 3 4 5 6

1 Supplying all material,equipments, labour &

conducting reconnaissance survey, integrated

Hydrological & Geophysical (Electrical Resistivity

method) survey & selection of potential source

for exploration of Ground water including

selection and recommendation of site for drilling

production wells in the area under the following

Geological formation.

Hard rock granite /sedimentary terrain upto200

mtr.

1.00 Each Job 3,000.00 3,000.00

2 Labour for drilling a perfectlybore hole for

specified dia for specified depth below G.L

through consolidated and unconsolidated rocks

with fast drilling sophisticated DTH/combination

rig to suit the site condition as per the direction of

the Engineer-in-charge including use of own Rigs

with it accessories, T&P consumables etc.,for

lowering of 200mm dia GI/PVC pipe for housing

fitted with socket and with or with out well screen

as per necessity for soft , medium, hard &

boulder formation (GI/PVC/MS casing pipe if

required to prevent collapse of over burden is to

be provided by the contractor including lowering

and withdrawing after completion of Tube well)

200mm doa to 400mm dia in overburden portion

including packing of gravel suppiled by the

contractor for 400mm dia bore only.

a) 200 mm dia

1) 0 Mtr to 30 Mtr 30.00 Each Mtr 974.78 29,243.40

2) 30 Mtr to 100 Mtr 70.00 Each Mtr 1,074.45 75,211.50

3 Lowering the following size of G.I. /PVC/MS

housing pipe with or without slotted pipes as per

the necessity from ground level up to 45mtr

depth fitted and fixed up in perfectly vertical

position including cutting & threading of pipes &

slotted pipes & supplying & fixing all jointing

materials, tools & plant etc. all complete &

keeping the top of casing pipe threaded including

plugging tube-wells to prevent entry of foreign

materials and keeping the casing pipe 1.00mtr

above GL.

a) 200 mm dia

1) 0 Mtr to 30 Mtr 30.00 Each Mtr 76.08 2,282.40

2) 30 Mtr to100 Mtr 70.00 Each Mtr 99.29 6,950.30

4 Cleaning and developing the tube well with their

own compressor continuously worked till clear

and adequate discharge is obtained from the

tube well including supply and use of all

necessary equipments and labour as per

direction of Engineer-in-charge. 1.00 Each No 3,343.50 3,343.50

BOREWELL


SlNo Description of WorkTotal

QtyUnit Rate Amount

5 Supplying all materials, labour, T&P and

providing sanitary sealing by cement concretes

grouting of annular space around G.I./PVC/M.S.

Housing pipe up to 5 meters below G.L. to plug

the bore including cost of cement etc all

complete as per the direction of Engineer-in-

charge minimum one mtr casing pipe to be

inserted in the bore into the rock at the bottom to

ensure sanitary sealing. 1.00 Each No 1,067.38 1,067.38

6 Supplying all materials, labour, T&P for fitting

and fixing of PVC casing pipe (ASTM D 1785

Sch-80) of following dia with socket including

cost of all materials, all taxes, all labour,

transportation to sites etc. complete as per PH

specification & direction of Engineer-in-

charge.(MAKE:SUPREME PVC PIPES)

150 mm dia pvc Pipes 60.00 Each Mtr 997.18 59,830.80

7 Providing, fitting and fixing and laying of rigid

PVC (ASTM D 1785 Sch-80) pipe threaded at

both ends, complete with required galvanized

iron fittings, confirming to laid below and above

ground level both in horizontal and vertical

position, including cutting the pipes to sizes,

threading, jointing with sockets, testing to

required pressure head, excavation of the pipe

line trenches up to a depth of 0.80mt in all kinds

of soil and rock, refilling the trenches with

excavated soil in layers of 30 cm with supply of

all materials all complete as per PH

specification & direction of Engineer-in-

charge.(MAKE:SUPREME )

a)50mm dia PVC pipe 80.00 Each Mtr 288.00 23,040.00

8 Supplying fitting, fixing of 1.00 HP submersible

pump , Make (CROMPTON GREAVES) with

control panel,2nos S.S tapper ,M.S nuts & bolt &

cap suitable for the above pump sets including

cost of all materials, transportation and taxes of

pump etc. complete as per PH specification &


1.00 Each Set 12,800.00 12,800.00

9 Supplying, fitting and fixing of 3core flat industrial

cable (4sqmm) for submission conforming to IS

694 Flexible 1100V. To IS 694. including all cost

of material, labour, T&P etc

allcomplete.(Make:Havels/Finlox/Equivalent.

180.00 Each Mtr 142.45 25,641.00

10 Supplying all material, labour, T &P for

installation of submersible pump set and starter

including supplying of hanger plate & nylon rope

ect. all complete including testing and

commissioning as per direction of the Engineer-

in-charge. 1.00 Each No 2,000.00 2,000.00

11 Chemical & bacteriological testing of water

sample after completion of production well. 1.00 Each No 1,500.00 1,500.00

Total Rs 245,910.28

Say 245,910.00



1 2 3 4 5 6

1a Excavation in ordinary soil for foundation including dressing

and levelling the bed and depositing the soil within 50m. initial

lead and 1.5m.initial lift including rough dressing and breaking

clods to maximum 5cm. to 7cm. and laying in layer

83.96 Cum 89.20 7489.23

5 Providing and laying P.C.C. (1:3:6) in foundation trench and

below flooring using 40mm down graded chrusher broken HG

Metal, including compaction, curing including cost of all

materials and labour etc. complete as per direction of Engineer-

In -Charge.

17.38 Cum 4206.90 73115.92

6 Fly ash brick masonry using Fly ash bricks of size 25cm x 12

cm x 8 cm having crushing strength not less than 75 kg. Per

Sqr. Cm. In cement mortar of mix(1:6) with cement and

screened and washed sharp sand for mortar after immersing

the bricks for 6 (six) hours in water before use in foundation,

plinth, basement and for ornamental flower beds, plinth

moulding and similar such type of works with all necessary

projections, splays cutting, circular moulding, corbelling,

chamfering, watering and curing etc. including cost,

conveyance, loading unloading, royalties and taxes of all

materials and cost of all labour, sundries, T & P required for

the works etc. complete in all respect as directed by the

Engineer-in-Charge.

27.65 Cum 3797.50 105000.88

7 R.C.C. work of M20 using 20mm and down graded hard

granite crusher broken chipes including laying,hosting,centring

& shuttering with all cost,conveyance of material etc.complete.

I FOUNDATION & PLINTH

Footing & Pedestal 12.20 Cum 5158.72 62936.40

II SUPERSTRUCTURE

Column in superstructure

GF 161.30 Cum 8689.10 1401573.55

8 Supply M.S. reinforcement for R.C.C. work including cutting,

bending, binding and tying the grills and placing in position

including cost of reinforcement and binding wire 18 to 20

gauge.

GF 19.65 Qntl. 5057.30 99375.95

9 Fly ash brick masonry using Fly ash bricks of size 25 cm. x 12

cm. x 8 cm. having crushing strength not less than 75 kg. Per

Sqr. Cm. in cement mortar of mix (1:6) with cement after

immersing the bricks for 6 (Six) hours in water before use in

superstructure including splays cutting, circular moulding,

corbelling, chamfering and similar such type of works, watering

and curing etc. including cost, coveyance, loading and

unloading, royalties and taxes of all materials and cost of all

labour, scaffolding, sundries, T&P required for the works etc.

complete in all respect as directed by the Engineer-in-charge.

GF 39.04 Cum 3830.80 149554.43

BOUNDARY WALL






smooth to the even surface of the brick masonry walls after



unloading,stacking, royalties and taxes of all Materials, cost of

all Labour, T&P, Sundries , Scaffolding, Watering,



GF 189.00 Sqm 132.40 25023.60




smooth to the rough surface of the brick masonry walls after



unloading,stacking, royalties and taxes of all Materials, cost of

all Labour, T&P, Sundries , Scaffolding, Watering,



GF 189.00 Sqm 138.90 26252.10

22 Supplying, fitting and fixing M.S. grill made out of structural

steel, flats, plates, bars, confirming to IS specification for

windows, ventilators etc. as per drawing and design, fixed to

walls with clamps including 1 priming coat with approved

metal primer and making good to all damages in walls and

floors etc. including cost of all materials, labour, conveyance,

taxes, royalties, scaffolding, sundries, tools and plants, etc.,

complete as per the direction of the Engineer-in-charge.

141.75 kg 71.10 10078.43

31 Fencing with angle iron post placed at required distance

embedded in cement concrete blocks, every 15th post, last but

one end post and corner post shall be strutted on both sides

and end post on one side only and provided with horizontal

lines and two diagonals interwoven with horizontal wires, of

barbed wire weighing 9.38 kg per 100 m (minimum), between

the two posts fitted and fixed with G.I. staples, turn buckles etc.

complete. (Cost of posts, struts, earth work and concrete

work to be paid for

separately). Payment to be made per metre cost of total length

of barbed wire used.

With G.I. barbed wire

105.00 RMT 12.95 1359.75

Total 1,961,760.24

Say 1,961,760.00


Sl.

No.Description of work Quantity Unit Rate Amount

1 2 3 4 5 6

A

1 Clearing and grubbing road land including

uprooting rank vegetation, grass, bushes, shrubs,

saplings and trees girth up to 300 mm, removal of

stumps of trees cut earlier and disposal of

unserviceable materials and stacking of serviceable

material to be used or auctioned, up to a lead of

1000 metres including removal and disposal of top

organic soil not exceeding 150 mm in thickness, with

cost of all labours, materials , T&P etc. as required

for the work complete as per the direction of

Engineer-In-Charge.

0.02 Hector 36646.50 824.55

2 Earthwork in Excavation in ordinary soil within 50m,

initial lead and 1.5m, initial lift including rought

dressing and breaking clods to maximum 5cm to 7cm

and laying in layers not exceeding 0.3m in depth and

as per direction of the Engineer-incharge.

33.75 Cum 74.30 2507.63

3 Construction of embankment with approved materials

deposited at site from roadway cutting and

excavation from drain (not exceeding 0.6 m depth)

and foundation of other structures graded and

compacted to meet requirement of Tables 300.1 and

300.2 as per Technical Specification Clause 301.5

MORD/ 305 MORTH including overhead & Contract

profit but excluding VAT

33.75 Cum 117.53 3966.49

4 Construction of embankment with approved material

obtained from borrow area with all lifts and leads,

transporting to site by mechanical means, within a

leads of 15 Kms, spreading, grading to required

slope and compacting as per requirement including

cost of all labours, Materials,Sundries T&P etc. as

required for the work complete as directed by the

Engineer-in-charge.

33.75 Cum 539.50 18208.13

5 Construction of sub-grade and earthen shoulders

with approved material obtained from borrow pits with

all lifts & leads, transporting to site, spreading,

grading to required slope and compacted to meet

requirement of table No. 300-2. including cost of all

labours, loading, unloading of materials, sundries,

T&P etc. as required for the work , complete as per

the direction of Engineer-In-Charge

112.50 Cum 729.20 82035.00

C.C. ROAD

LENGTH ROAD-100M


Sl.


6 Construction of granular sub-base by providing close

graded material, spreading in uniform layers with

motor grader on prepared surface, mixing by mix in

place method with rotavator at OMC, and compacting

with vibratory roller to achieve the desired density,

complete as per clause 401( Grade ii). Including cost

of all labours, loading & unloading of materials,

sundies, T&P required etc. as required for the work,

complete as per the direction of Engineer-In-Charge.

33.75 Cum 1756.30 59275.13

7 Supplying and filling with sand well watered and

rammed in layers not exceeding 23 cm In depth over

GSB including cost of conveyance, loading,

unloading, royalties and taxes of all materials, cost of

all labour, sundries, T&P required for the work etc.

complete in all respect as directed by the Engineer-in-

Charge. Measurement will be taken on finished

compacted section only).

33.75 Cum 410.30 13847.63

8 Providing and laying Plain Cement Concrete of

proportion (1:3:6) over sand filling using 40 mm

size crusher broken H.G Stone Metal free from

weathered skins, cement and screened & washed

sharp river sand for mortar of approved quality &

from approved quarry including hoisting, lowering

and laying concrete to the required level, ramming,

watering & curing etc complete to required levels,

laid in layers not exceeeding 15cm thick in each layer

including cost of conveyance ,

loading,unloading,royalties and taxes of all materials,

cost of all labours, Sundries, T&P required for the

work including shoring, shuttering and dewatering ( if

required) including hire and running charges of water

pump required for the work etc complete in all

respect as directed by the Engineer-in-charge.

33.75 Cum 4287.00 144686.25

9 Providing and laying Plain Cement Concrete of

proportion (1:2:4) in foundation using 12 mm size

crusher broken H.G Stone Metal free from weathered

skins ,cement and screened & washed sharp river

sand for mortar of approved quality & from approved

quarry including hoisting, lowering and laying

concrete to the required level, ramming, watering &

curing etc complete to required levels, laid in layers

not exceeeding 15cm thick in each layer including

cost, conveyance , loading,unloading,royalties and

taxes of all materials, cost of all labour, Sundries,

T&P required for the work including shoring,

shuttering and dewatering ( if required) including hire

and running charges of water pump required for the

work etc complete in all respect as directed by the

Engineer-in-charge.

67.50 Cum 5380.00 363150.00

10 Providing & fixing Rigid Smoth Centering &

shuttering for R.C.C. works in sub-structure including

false works and dismantling them after casting

including cost of all labours, materials, sundries, T&P

etc. as required for the work complete as per the

direction of Engineer-In-Charge.


Sl.


a Foundation 52.50 Sqm 92.90 4877.25

11 Supplying all matrerials & labours for the construction

of Cement Concrete Kerb with Top & Bottom width

115 & 165 mm respectively, and of height 250 mm.

Providing M20 grade R.C.C. for the Kerb & M10

grade P.C.C. for the kerb foundation of thickness

150mm having 50mm projection of the foundation

beyond the kerb stone & Laying the kerb stone by

kerb laying Machine & the foundation concrtete

manually including the cost of all labours, loading,

unloading & taxes of all materials, conveyance, T&P

etc required for the work complete in all respect as

per the direction of Engineer-In-Charge.

75.00 Rmt 284.17 21312.75

12 Providing and painting two coats with synthetic

enamel paint of approved quality and approved

shade confirmming to ISI on the vertical wall of the

kerb to give an even shade over a coat of primer of

approved quality and shade including sand papering

and making the surface smooth with cost of

coveyance, loading, unloading, and taxes of all

materials, cost of all labour, sundries, T&P etc.

required for the work and complete in all respect as

directed by Engineer-in-charge.

46.13 Sqm 127.80 5894.78

13 Hire charges of vibrator @ 2.5cum of concrete/hr 41.00 hrs 106.00 4346.00

14 Providing Salitex Board to expansion joints 6.00 Sqm 593.00 3558.00

15 Add for Cross Drainage works 2.00 Nos 25000.00 50000.00

778,489.56

B

1 Earth work in excavation of foundation of structures as per

drawing and technical specification, including setting out,

construction of shoring and bracing, removal of stumps and

other deleterious matter, dressing of sides and bottom and

backfilling with

26.36 Cum 140.2 3695.672

2 Filling sand of approved quality as per approved drawing

and direction of the Engineer-in-charge including cost,

conveyance, royality taxes of all materials conforming to

the MORTH techanical specification.

7.53 Cum 410.3 3089.559

3 Cement concrete (1:4:8) Levelling coarse with 40 mm size

C.B. Metal of approved quality as per approved drawing

and direction of the Engineer-in-charge including cost,

conveyance, royality taxes of all materials conforming to

the MORTH techanical specification.

7.53 Cum 3856.8 29041.704

SUB TOTAL (A) =


Sl.


4 Cement concrete M-20 grade RCC in foundation and wall

as per approved drawing and direction of the Engineer-in-

charge including cost, conveyance, royality taxes of all

materials conforming to the MORTH techanical

specification.

a) Top Slab (50% covered slab) 7.50 Cum 8601.9 64514.25

Slab 11.30 Cum 5290.6 59783.78

c) Wall (Both side) 30.00 Cum 8234.9 247047

5 Supplying, fitting and placing HYSD bar reinforcement in

sub-structure complete as per drawing and Technical

Specifications

19.52 MT 5267 102811.84

509983.805

1,288,473.37

1288473.00

SUB TOTAL (B) =

Grand Total (A+B) =

SAY =


VOLUME III - Engineering Projectsengineeringprojects.com/Tender/UploadFiles/3198_Vol... ·...

Documents

Transcript of VOLUME III - Engineering Projectsengineeringprojects.com/Tender/UploadFiles/3198_Vol... ·...