Vodafone @ Home 4G Router (Huawei B310) · Web view Vodafone Wireless net 4G Router Appendix:...

Click here to load reader

  • date post

    06-Apr-2020
  • Category

    Documents

  • view

    6
  • download

    0

Embed Size (px)

Transcript of Vodafone @ Home 4G Router (Huawei B310) · Web view Vodafone Wireless net 4G Router Appendix:...

Vodafone @ Home 4G Router (Huawei B310)

Vodafone Wireless net 4G Router

Appendix:

· Accessing wireless net 4G Router page

· Home Page

· Quick Setup

· Statistics

· SMS

· USSD

· Update

· Settings – Change Network Mode

· Settings – Change Wi-Fi network name and password

· Settings – Change Default Gateway IP & DHCP ranges

· Settings – Change Router admin password

· Settings – Restore Default

· Management Page View

· Accessing wireless net 4G Router page:

· Open a new tab in your browser

· Type the router default gateway IP in the address bar: 192.168.8.1

· Type the default administrator router’s credentials (User name & Password): admin

· After the 1st Login immediately, the page will offers you to change the administrator password, in order to have a new one with a high strength of security, if you clicked Later, then it will redirects you to the Quick Setup basic configurations

· If you clicked Change Now, it will redirect you to type the current password: admin, then to type the new password twice in the next two text boxes then to click Apply

· Then the page will redirects you to the Home Page

· Home Page:

· This page has got many information as:

· Network Type “4G” and Signal Strength “3 Bars”

· Line Number after clicking on My Number button

· Number of Wi-Fi connected devices in front of “Current WLAN users”

· Mobile Data button to disconnect/connect the internet connection if needed

· Quick Setup:

· Step 1: Configure Profile Settings used to change the APN “Access Point Name” if needed, in case of Dedicated/Static IP configurations

· Step 2: Configure Ethernet Settings used to change the Ethernet connection mode if needed, (Default will be Auto)

· Step 3: Configure WLAN Settings used to change the Wi-Fi configurations, as the Wi-Fi Network Name (SSID), and the Wi-Fi Password (WPA pre-shared key)

· After clicking Finish, the page will saves the configurations, till it shows a success message

· Statistics:

· This page contains Statistics about the mobile network connection volume and duration, also you can manage your data bundle limit by clicking on Data Plan button

· This page contains also the number, IP Address, Name, MAC Address, and Duration of the Connected WLAN Clients

· At the end of this page there is a Blacklist table which contains the list of the Blocked devices

· SMS:

· You can send and receives message from the SMS page

· USSD:

· You can dial *2828# code to manage your line from the USSD page

· Update:

· This page searches for any available router’s firmware Online Update if needed

· Also you can browse and upload the update file from the Local Update button

· Settings – Change Network Mode:

· Settings - Dial-up - Network Settings – Network Preferred Mode

· The default network selection is set to Auto depending on the best network signal strength, but you can select between: Auto, 2G Only, 3G Only, 4G Only

· Settings – Change Wi-Fi network name and password:

· Settings - WLAN – WLAN Basic Settings

· Used to change the Wi-Fi configurations, as the Wi-Fi Network Name (SSID), and the Wi-Fi Password (WPA pre-shared key)

· Settings – Change Default Gateway IP & DHCP ranges

· Settings - WLAN – DHCP

· This page Is used to change the default router’s IP address 192.168.8.1 to any other IP: 192.168.xxx.xxx, also you can set the DHCP IP range from 0 to 255 instead of using the default range: from 100 to 200

· Settings – Change Router admin password:

· You have to type the current administrator password “admin” in the current password text box, then to type your new password twice in the two next text boxes then to click Apply

· Settings – Restore Default

· Settings – System – Restore Defaults

· This option is used to reset your router’s configurations to its default factory settings

· Management Page View

· Open a new tab in your browser

· Type the Vodafone’s data lines Management page URL: (vf.eg/USB) in the address bar

· You can check your internet data bundle main and the consumed quotas, also you can buy extra add-ons, and to repurchase or to change your data rate plan if needed