VNMX Inserts and Holders · NEW-215-1 (1/2015) PAGE 1 OF 6 Holders • External HVJNR/L, HVQNR/L,...
6
NEW-215-1 (1/2015) PAGE 1 OF 6 Holders • External HVJNR/L, HVQNR/L, HVVNN • Boring Bars A-SVQNR/L, A-SVUNR/L Corner Radii • .008, .016, .031 and .047" Grades • Cermet - CT3000, PV3010 for high cutting speeds • PVD coated carbide TT5080, TT9080 for stainless and high-temp • CVD coated carbide TT8115, TT8125, TT8135, TT5100 for steel TT9225, TT9235, TT5100 for stainless TT7005, TT7015 for cast iron VNMX Inserts and Holders Ingersoll is pleased to announce another expansion to the Gold-Rhino™ product line, this time for 35 degree VNMX inserts and corresponding external holders and boring bars. These negative, double-sided inserts provide the same benefit as other Gold- Rhino inserts…a 25-30% lower price for a smaller IC insert (compared to typical 3/8” IC, VNMG inserts). Normally, 35° inserts are used for lighter depths of cut which makes the smaller IC, VNMX Gold-Rhino inserts a logical choice – they achieve the same or better performance compared to larger, more expensive inserts. All external holders for the VNMX inserts use a hook lever, H-Type holder, whereas all internal boring bars use a screw to hold the insert in place. All inserts are top & bottom ground and feature a wide seating surface to maximize contact in the pocket, thereby increasing stability of the tool. VNMX inserts are available in 6 different chipbreakers and 12 grades, with 86 unique inserts offered as standard items. Nose radii from .008” to .047”. FEATURES • Same thickness as VNMG33x inserts, but 25-30% lower price! • Double-sided Inserts • External holder and boring bar options • Convenient and stable hook-lever clamping for external holders
Transcript of VNMX Inserts and Holders · NEW-215-1 (1/2015) PAGE 1 OF 6 Holders • External HVJNR/L, HVQNR/L,...
-
NEW-215-1 (1/2015)PAGE 1 OF 6
Holders• External HVJNR/L, HVQNR/L, HVVNN• Boring Bars A-SVQNR/L, A-SVUNR/L
Corner Radii• .008, .016, .031 and .047"
Grades• Cermet - CT3000, PV3010 for high cutting speeds• PVD coated carbide TT5080, TT9080 for stainless and high-temp• CVD coated carbide TT8115, TT8125, TT8135, TT5100 for steel TT9225, TT9235, TT5100 for stainless TT7005, TT7015 for cast iron
VNMX Inserts and HoldersIngersoll is pleased to announce another expansion to the Gold-Rhino™ product line, this time for 35 degree VNMX inserts and corresponding external holders and boring bars.
These negative, double-sided inserts provide the same benefi t as other Gold-Rhino inserts…a 25-30% lower price for a smaller IC insert (compared to typical 3/8” IC, VNMG inserts). Normally, 35° inserts are used for lighter depths of cut which makes the smaller IC, VNMX Gold-Rhino inserts a logical choice – they achieve the same or better performance compared to larger, more expensive inserts.
All external holders for the VNMX inserts use a hook lever, H-Type holder, whereas all internal boring bars use a screw to hold the insert in place. All inserts are top & bottom ground and feature a wide seating surface to maximize contact in the pocket, thereby increasing stability of the tool.
VNMX inserts are available in 6 different chipbreakers and 12 grades, with 86 unique inserts offered as standard items. Nose radii from .008” to .047”.
FEATURES • Same thickness as VNMG33x inserts, but 25-30% lower price!• Double-sided Inserts• External holder and boring bar options• Convenient and stable hook-lever clamping for external holders
-
845 South Lyford Road, Rockford, IL 61108Tel: 815.387.6600, Fax: 815.387.6968
NEW-215-1 (1/2015)PAGE 2 OF 6
Insert Shim Pin Shim Hook Lever Screw
Clamping from the top Clamping from the bottom
Holder Clamping Method
-
845 South Lyford Road, Rockford, IL 61108Tel: 815.387.6600, Fax: 815.387.6968
NEW-215-1 (1/2015)PAGE 3 OF 6
VNMX Negative 35º rhombic inserts
Size Dimension (in)d t rVNMX2.530.5 .312 .187 .008VNMX2.531 .312 .187 .016 VNMX2.532 .312 .187 .031VNMX2.533 .312 .187 .047
Insert ANSI (ISO) Designation
Recommended machining conditions Cermet CVD Coated
PVD coated
feed (ipr)
ap (in) PV
3010
CT30
00
TT70
05
TT70
15
TT81
15
TT81
25
TT81
35
TT92
15
TT92
25
TT92
35
TT51
00
TT50
80
TT90
80
VNMX 2.531 (130404) FG .003-.008 .020-.079
2.532 (130408) FG .004-.009 .020-.079
VNMX 2.531 (130404) FM .003-.012 .010-.059
2.532 (130408) FM .004-.014 .012-.059
VNMX 2.530.5 (130402) FS .002-.010 .008-.039
2.531 (130404) FS .003-.012 .012-.039
2.532 (130408) FS .004-.012 .020-.039
VNMX 2.531 (130404) MK .007-.014 .028-.118
2.532 (130408) MK .008-.016 .039-.118
VNMX 2.531 (130404) MT .006-.014 .031-.118
2.532 (130408) MT .007-.014 .039-.118
2.533 (130412) MT .008-.016 .059-.118
VNMX 2.531 (130404) PC .006-.014 .016-.118
2.532 (130408) PC .007-.014 .020-.118
2.533 (130412) PC .008-.016 .039-.118
: Standard item
t
d
35°
r
-
845 South Lyford Road, Rockford, IL 61108Tel: 815.387.6600, Fax: 815.387.6968
NEW-215-1 (1/2015)PAGE 4 OF 6
DesignationLever Screw Shim Shim pin Wrench
VNMX 2.53x LCL 08-NX LCS 4-DH LSV 2.51.8H LSP 3B L-W 2.5
Approach angle Designation Dimension (in) Inserth b l1 l2 f93° HVJNR/L 10-253A .625 .625 4.00 1.18 .750 VNMX 2.53x
12.253B .750 .750 4.50 1.38 1.00016-253D 1.000 1.000 6.00 1.69 1.25020-253D 1.250 1.250 6.00 1.97 1.500
117.5° HVQNR/L12-253B .750 .750 4.50 1.38 1.00016-253D 1.000 1.000 6.00 1.38 1.250
HVJNR/L
h
b
h
.197” (only for .625” size shank)
f
l2l1
93°
44° max.
HVQNR/L
h
b
h
f
117.5°
l2l1
h
b
h
.197” (only for .625” size shank)
f
l2l1
93°
44° max.
h
b
h
.197” (only for .625” size shank)
f
l2l1
93°
44° max.
HVJNR/L HVQNR/L Hook lever type holder
Spare parts
-
845 South Lyford Road, Rockford, IL 61108Tel: 815.387.6600, Fax: 815.387.6968
NEW-215-1 (1/2015)PAGE 5 OF 6
DesignationLever Screw Shim Shim pin Wrench
VNMX 2.53x LCL 08-NX LCS 4-DH LSV 2.51.8H LSP 3B L-W 2.5
Approach angle Designation Dimension (in) Inserth b l1 l2 f72.5° HVVNN 12-253B .750 .750 4.50 1.38 .375 VNMX 2.53x
16-253D 1.000 1.000 6.00 1.38 .500
HVVNN
h
b
h
f
l2l1
72.5°
60° max.
h
b
h
f
l2l1
72.5°
60° max.
HVVNN Hook lever type holder
Spare parts
-
845 South Lyford Road, Rockford, IL 61108Tel: 815.387.6600, Fax: 815.387.6968
NEW-215-1 (1/2015)PAGE 6 OF 6
Approach angle Designation Dimension (in) Insertdg7 l1 l2 f Dmin95° A16T SVUNR/L-2.53 1.00 12.0 1.58 .625 1.25 VNMX 2.53x
A20U SVUNR/L-2.53 1.25 14.0 1.58 .750 1.50
117.5° A16T SVQNR/L-2.53 1.00 12.0 1.30 .750 1.30A20U SVQNR/L-2.53 1.25 14.0 1.38 .875 1.65
DesignationScrew Shim Shim screw Wrench 1 Wrench 2
VNMX 2.53x TS 30120I/HG SSVN 2.523 TS 5030062S T 9(T-9/5) L-W 3.5
A-SVUNR/L A-SVQNR/L
Dminf 93°
dg7
l1l2
50° max.
Dmin
l1l2
25° max.
dg7
f 107.5°
Dminf 93°
dg7
l1l2
50° max.
Dmin
l1l2
25° max.
dg7
f 107.5°
A-SVUNR/L A-SVQNR/L Screw type holder
Spare parts
