VMET_Document
Click here to load reader
-
Upload
david-pollack -
Category
Documents
-
view
45 -
download
0
Transcript of VMET_Document
OCCUPATION: MM, Machinist's Mate
PRIMARY OCCUPATION:
NAVY, RESERVE:
OCT 2012 - APR 2015 (2 Years 6 Months)
NAVY, ACTIVE:
JUN 2008 - SEP 2012 (4 Years 3 Months)
NAVY, ACTIVE:
JUN 2002 - JUN 2008 (6 Years)
NAVY, ACTIVE:
AUG 1999 - JUN 2002 (2 Years 10 Months)
NAVY, ACTIVE:
JAN 1999 - AUG 1999 (7 Months)
NAVY, ACTIVE:
APR 1998 - JAN 1999 (9 Months)
NAVY, ACTIVE:
DEC 1997 - APR 1998 (4 Months)
DUTY OCCUPATION:
NAVY, ACTIVE:
JUN 2008 - SEP 2012 (4 Years 3 Months)
NAVY, ACTIVE:
JUN 2002 - JUN 2008 (6 Years)
NAVY, ACTIVE:
AUG 1999 - JUN 2002 (2 Years 10 Months)
VERIFICATION OF MILITARY EXPERIENCE AND TRAINING
1. LAST NAME - FIRST NAME - MIDDLE NAME 2. PAY GRADE 3. YEAR(S) INSERVICE
POLLACK DAVID ALLAN E-6 17
4. MILITARY SERVICE COMPONENT 5. DATE OFINFORMATION
NAVY, RESERVE 2015 APR 01
6. EXPERIENCE AND TRAINING HISTORY (In reverse chronological order) AND RELATED INFORMATION
EXPERIENCE HISTORY:
NAVY, ACTIVE:
JAN 1999 - AUG 1999 (7 Months)
NAVY, ACTIVE:
APR 1998 - JAN 1999 (9 Months)
NAVY, ACTIVE:
DEC 1997 - APR 1998 (4 Months)
OCCUPATION DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION FOR: MM
(NER-MM-006, Exhibit dates OCT 2007 - APR 2015)
Machinist's Mates (Surface) (MM) operate, maintain, and repair (organizational and intermediate level) ship propulsion
machinery, auxiliary equipment, and outside machinery, such as: steering engine, hoisting machinery, food preparation
equipment, refrigeration and air conditioning equipment, windlasses, elevators, and laundry equipment. Operate and
maintain (organizational and intermediate level) marine boilers, pumps, forced draft blowers, and heat exchangers;
perform tests, transfers, and inventory of lubricating oils, fuels, and water. Maintain records and reports, and may
perform duties in the generation and stowage of industrial gases.
Machinist's Mates (Submarine) (MM) also perform organizational and intermediate level maintenance on test
equipment, launching/firing systems, and stowage facilities associated with underwater ordnance. Perform
organizational maintenance on underwater ordnance and small arms. Additionally, MM (SS)'s prepare underwater
ordnance for launching, conduct post fire and post run routines.
PAY GRADES UP TO E-6 (MM1): MM Surface: cleans and inspects Hazardous Material (HAZMAT) containers; cleans
auxiliary machinery Forced Draft Blowers (FDB), fuel oil service pumps, lube oil and main feed pumps; conducts salinity
and conductivity indicator comparison tests, spill containment and clean up, and steam blanket lay-up; disposes of
hazardous materials; draws fluid samples; inspects HAZMAT storage areas; inventories oil lab test equipment and
chemicals; maintains air castings, air register assemblies, anchor windlasses, boiler firesides, fronts and watersides,
burner Safety Shut-off Devises (SSD), components of laundry equipment, stern tubes and air systems, diaphragm
control valves, distilling plants, emergency shutdown devices, gland seals, heat exchanges, hydraulic systems,
hydrostatic test pumps, jacking gears, main lube oil systems, manhole and hand hole seat gaskets, reducing stations,
systems pumps, reducing stations, ventilation filters, water heaters and winch equipment; operates air compressors, air
conditioning systems, air dryer systems, auxiliary exhaust and steam systems, bilge and stripping pumps, blow down
systems, chill water systems, feed booster pumps, jacking gears, main boilers, drain and feed systems, oil service
pumps, refrigeration systems, shore steam systems and transfer systems for receiving fuels; prepares reagents and
chemicals; repairs components of galley and scullery equipment, water heaters, and Ships Service Turbine Generators
(SSTG); reviews asbestos gasket fabrication and removal precautions; stores hazardous materials; tests fuel oil service,
standby and storage tanks for presence of water; troubleshoots galley equipment, laundry equipment, machinery speed
limiting devices, mess deck equipment, reducing stations, scullery equipment, water heaters and winch equipment.
MM Submarine: records equipment operating parameters; lines up, starts, adjusts, and secures fresh water drain
collection systems; lines up, starts, adjusts, and secures waste water drain systems; starts up air systems; secures air
systems; lines up, starts and secures auxiliary drain pumps; disposes of hazardous waste and hazardous materials;
stores, handles and receives hazardous waste and hazardous materials; fabricates gaskets (valves, pumps, pipes);
inspects and replaces seals, gaskets, and o-rings; installs blank flange on piping; replaces, cleans and lubricates valve
components; inspects, adjusts, and tests valves; performs hydrostatic tests; replaces and cleans system filters and
strainers; cleans and blows sea chests; troubleshoots, repairs and overhauls valves; repairs flexible couplings; conducts
rigging operations; assembles grease guns; verifies greasing plan; submits appropriate quality assurance forms;
maintains weight, test, and calibration logs; maintains equipment operation logs; draws diagrams and sketches; verifies
accuracy of ship's drawings and diagrams; uses drawings (blueprints and schematics); uses, cleans, and inspects
general purpose electronic test equipment (GPETE).
Surface: approves repair quality assurance forms; cleans components of Forced Draft Blowers (FDB); conducts
preliminary boiler closeout inspections, Main Reduction Gear (MRG) closeout and bearing inspections, and structural
inspection of boilers; controls boiler operations in remote manual; coordinate preparations for boiler flexibility tests, full
power and economy trials, and for propulsion plant start-up and operations; equalizes boiler loads; estimates fuel, lube
oil and water requirements; inspects boiler firesides, watersides, and components of Forced Draft Blowers (FDB);
maintains boiler internal fittings, safety valves, sliding feet and sprayer plates; operates and maintains O2N2 systems;
prepares continuous treatment solutions, fuel, oil and water reports; presents boiler for inspection appraisal; removes,
repairs, and replaces components of Forced Draft Blowers (FDB); reviews and validates Engineering Operational
Sequencing System (EOSS) manuals and HAZMAT inventories; tests boiler safety valves; troubleshoots operation of
Forced Draft Blowers (FDB) and Ships Service Turbine Generators (SSTG); and updates equipment calibration
schedules and repair quality assurance forms.
Submarine: submits quality discrepancy reports; conducts quality assurance program inspections; prepares and submits
re-entry control forms; prepares control work packages; submits departure form specifications packages; conducts
acceptance inspections on components; reviews and updates divisional logs and records; compiles equipment
performance data; and uses SPETE.
Surface: approves repair quality assurance forms; cleans components of Forced Draft Blowers (FDB); conducts
preliminary boiler closeout inspections, Main Reduction Gear (MRG) closeout and bearing inspections, and structural
inspection of boilers; controls boiler operations in remote manual; coordinate preparations for boiler flexibility tests, full
power and economy trials, and for propulsion plant start-up and operations; equalizes boiler loads; estimates fuel, lube
oil and water requirements; inspects boiler firesides, watersides, and components of Forced Draft Blowers (FDB);
maintains boiler internal fittings, safety valves, sliding feet and sprayer plates; operates and maintains O2N2 systems;
prepares continuous treatment solutions, fuel, oil and water reports; presents boiler for inspection appraisal; removes,
repairs, and replaces components of Forced Draft Blowers (FDB); reviews and validates Engineering Operational
Sequencing System (EOSS) manuals and HAZMAT inventories; tests boiler safety valves; troubleshoots operation of
Forced Draft Blowers (FDB) and Ships Service Turbine Generators (SSTG); and updates equipment calibration
schedules and repair quality assurance forms.
Submarine: coordinates and maintains quality assurance material storage surveillances and schedules; conducts sub
safe quality assurance surveillances; documents field changes; verifies and develops procedural documentation;
conducts quality assurance safety surveillances; documents special projects alternations (SPALT); and reviews work
packages.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION FOR: MM
(NER-MM-006, Exhibit dates OCT 2007 - APR 2015)
In the lower-division baccalaureate/associate degree category, 3 semester hours in basic hydraulic and pneumatic
systems, 3 in mechanical systems, 3 in mechanical systems troubleshooting, 3 in personnel supervision, 3 in computer
applications, and 3 in hazardous materials. If MM Surface, additional 3 hours in boiler maintenance and repair; and if
MM Submarine, additional 3 hours in quality assurance (10/07)(10/07).
RELATED CIVILIAN OCCUPATIONS FOR: MM
Machinery Maintenance Mechanics, Marine Equipment (OES 85116)
Maintenance Mechanic, Engine (DOT 623.281-034)
Maintenance and Repair Workers, General (ONET 49-9071.00)
Stationary Engineer (DOT 950.382-026)
Stationary Engineers (OES 95032)
OCCUPATION: FR, Fireman Recruit
PRIMARY OCCUPATION:
NAVY, ACTIVE:
JUL 1997 - DEC 1997 (5 Months)
OCCUPATION DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION FOR: FR
(NER-FN-002, Exhibit dates JAN 1990 - SEP 1999)
Under close supervision performs all basic fireman apprenticeship functions in engineering areas aboard ship, involving
cleanliness, operation, maintenance, and preservation of main propulsion, auxiliary steam or diesel machinery, steam or
diesel generators, various pumps, motors, and associated equipment; identifies basic types and components of naval
boilers, steam turbines, reduction gears, propellers and shafting, shipboard electric systems, and internal combustion
engines; performs routine maintenance procedures.
RELATED CIVILIAN OCCUPATION FOR: FR
Stationary Engineers and Boiler Operators (ONET 51-8021.00)
_____________________________
_____________________________
OCCUPATION: FN, Fireman
DUTY OCCUPATION:
NAVY, ACTIVE:
JUL 1997 - DEC 1997 (5 Months)
OCCUPATION DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION FOR: FN
(NER-FN-002, Exhibit dates JAN 1990 - SEP 1999)
Performs all basic fireman apprenticeship functions in engineering areas aboard ship, involving cleanliness, operation,
maintenance, and preservation of main propulsion, auxiliary steam or diesel machinery, steam or diesel generators,
various pumps, motors, and associated equipment; identifies basic types and components of naval boilers, steam
turbines, reduction gears, propellers and shafting, shipboard electric systems, and internal combustion engines;
performs routine maintenance procedures.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION FOR: FN
(NER-FN-002, Exhibit dates JAN 1990 - SEP 1999)
In the lower-division baccalaureate/associate degree category, 3 semester hours in introduction to marine engineering
and 1 in blueprint reading; if qualified as a swimmer, first class, 1 semester hour in swimming and additional credit in
swimming on the basis of institutional evaluation (3/90)(3/90).
RELATED CIVILIAN OCCUPATION FOR: FN
Stationary Engineers and Boiler Operators (ONET 51-8021.00)
NAVY:
NAVY ENLISTED CLASSIFICATIONS:
000 - Title not available
DEC 2014 - APR 2015
4513 - Automatic Combustion Control (General Regulator) Maintenanceman
OCT 2001 - SEP 2012
(Description dates JAN 1986 - APR 2015)
Performs organizational level maintenance on propulsion boiler automatic combustion control and feedwater control
system. Performs preventive and corrective maintenance on and troubleshoot, calibrate and test system and subsystem
components.
4533 - Automatic Combustion Control Console Operator (General Regulator)
AUG 2001 - JUN 2002
_____________________________ ADDITIONAL QUALIFICATION(S):
(Description dates JAN 1986 - APR 2015)
Functions as watchstanders on automatic combustion control consoles. Identifies abnormal conditions in operation of
plant that may lead to emergency and/or casualty and initiate corrective or emergency procedures.
OTHER RELATED CIVILIAN OCCUPATIONS
Boiler Operator (DOT 950.382-010)
Control and Valve Installers and Repairers, Except Mechanical Door (ONET 49-9012.00)
Instrument Technician (DOT 710.281-030)
Precision Instrument Repairers (OES 85905)
** Note: Experience history data not available prior to FY 75 **
** Note: Description, Length, or Credit Recommendation will not be displayed for a course if that information is not available.
MILITARY TRAINING:MAY 2011 - MAY 2011
NAVY COURSE: A-493-0050, NAVOSH ASHORE
LENGTH: 4 Days.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates OCT 1991 - APR 2015)
This course provides primary and collateral-duty shore-based military and civilian safety personnel with training to
independently implement, maintain and manage a comprehensive safety program ashore. This course is equivalent to
the Introduction to Industrial Hygiene for Safety Professionals Global Online course, CIN: A-493-0335. / The course
content includes terms, principles, concepts, and requirements for mishap prevention; safety, environmental, and
occupational health programs in the Navy; fundamentals of mishap causation; and hazard recognition, evaluation and
control. Also included are specific safety programs such as mishap investigation and reporting, occupational safety and
health standards, hazard abatement, respiratory protection, hearing conservation, sight conservation, ergonomics,
energy control, the basic Operational Risk Management (ORM) process, job safety analysis, and confined space entry,
M/V and off-duty safety.
(NAVY TRAINING HISTORY COURSE: A-493-0050)
MILITARY TRAINING:MAY 2009 - MAY 2009
NAVY COURSE: J-495-0419, ADV SHPBD F/F
TRAINING HISTORY: COURSESSUCCESSFULLY COMPLETED
_____________________________
_____________________________
LENGTH: 4 Days.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates JAN 1980 - APR 2015)
To provide supervisory fire party personnel with training in advanced fire fighting techniques and effective management
of on-scene personnel in a shipboard environment, as well as practical experience with various damage control and fire
fighting equipment. This course satisfies the five year live fire fighting requirement. / This course provides classroom
instruction in advanced fire fighting procedures and hands-on practical training and experience as Repair Locker
Leader, On-Scene Leader, Investigator, Team Leader, Nozzleman, Hoseman, Plugman, and Plotter. Students will be
required to combat different classes of fires under varied scenarios using different methods and equipment. The
following subjects are included: Chemistry of Fire, Portable Extinguishers, Personal Protective Clothing, Self-Contained
Breathing Apparatus (SCBA), DC Communications, Fire Party Duties and Responsibilities, Fire Fighting Procedures,
Wild Hose Recovery, Portable Exothermic Cutting Unit (PECU), Desmoking Equipment and Accessories, P-100
Emergency Pump and Accessories, Machinery Space Fire Doctrine, Special Hazard Fires, Mass Conflagration
Procedures, Repair Locker Equipment.This course satisfies Level III of Shipboard Survivability Training Level
Requirements IAW OPNAVINST 3541.1F.
(NAVY TRAINING HISTORY COURSE: J-495-0419)
MILITARY TRAINING:JAN 2008 - JAN 2008
NAVY COURSE: A-495-0416, GEN SHBD FF TRN SCBA
LENGTH: 1 Day.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates SEP 1998 - APR 2015)
To provide instruction to SURFOR Officers and Enlisted personnel in fire fighting equipment, procedures, and to prepare
them for qualification as members of a Shipboard Damage Control Organization. This course satisfies the five year live
fire fighting requirement. Accession (Boot Camp) live fire fighting also fulfills this five year requirement.AIRFOR assets
are no longer required to attend A-495-0416 Fire Fighting Course and shall only utilize A-495-0018 or A-495-0419 per
Naval Messages DTG 302200Z JUN 11. / This course includes proper techniques and procedures for combating various
classes of fires. Instruction on personnel protective equipment, chemistry of fire, portable fire extinguishers, and the Self
Contained Breathing Apparatus (SCBA).This course satisfies Level II of Shipboard Survivability Training Level
Requirements IAW OPNAVINST 3541.1F.
(NAVY TRAINING HISTORY COURSE: A-495-0416)
_____________________________
_____________________________
MILITARY TRAINING:MAY 2007 - MAY 2007
NAVY COURSE: A-557-0001, JOINT FLT QAI
LENGTH: 4 Days.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates DEC 1996 - APR 2015)
To train prospective Quality Assurance Inspectors providing a thorough understanding of the requirements and
procedures necessary to implement the requirements of the Joint Fleet Quality Assurance Program. / This course
provides training for U. S. Naval personnel to support coordinating and administering the Fleet Quality Assurance
Program IAW COMFLTFORCOMINST 4790.3 series, Volume V, within their work centers. This course also fulfills the
Fleet requirements for formal Controlled Material Petty Officer (CMPO) training.
(NAVY TRAINING HISTORY COURSE: A-557-0001)
MILITARY TRAINING:APR 2006 - APR 2006
NAVY COURSE: A-500-0102, WCSLC
LENGTH: 1 Week.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates MAR 2006 - APR 2015)
The First Line Leadership Development Program (FLLDP) consists of two subsections. The first subsection is the
classroom attendance of the Work Center Supervisor Leadership Course (WCSLC). The second subsection is the
required e-learning assigned to support the First Line Leadership Development Program and the Work Center
Supervisor Leadership Course. Completion of both subsections is required for credit in the First Line Leadership
Development Program. The Work Center Supervisor Leadership Course (WCSLC) supports Sailors, E4-E5, assigned to
the first leadership position within the chain of command and is responsible for the growth, development, and daily
direction of subordinates. WCSLC attendance is required for personnel (E4-E5) assigned to any comparable first line
leadership position. Previous completion of the FLLDP or PO2 LTC (CIN P-500-0025 or P-500-0055) satisfies the
requirement for WCSLC position assignment. The Navy Leadership Competency Model (NLCM) assigns the following
competencies to the First Line Leadership Development Program: Accomplishing Mission, Leading People, Leading
Change, Working With People and Resource Stewardship. Students will be applying leadership skill sets based on the
content derived from the NLCM. Posted on the WCSLC tab on the Leadership page will also be the Navy e-leanings
required to successfully complete the First Line Leadership Development Program. / THE PURPOSE OF THIS
COURSE IS TO PROVIDE WORK CENTER SUPERVISORS AND PERSONNEL IN EQUIVALENT LEADERSHIP
POSITIONS WITH THE REQUISITE NAVAL LEADERSHIP SKILLS NECESSARY TO FUNCTION AS EFFECTIVE
_____________________________
LEADERS AND MANAGERS WITHIN THEIR JOB POSITIONS.
(NAVY TRAINING HISTORY COURSE: A-500-0102)
MILITARY TRAINING:AUG 2001 - OCT 2001
NAVY COURSE: A-651-0040, General Regulator Automatic Boiler Control
LENGTH: 8 weeks (316 hours)
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-1710-0155, Exhibit dates AUG 2001 - APR 2015)
Upon completion of the course, the student will be able to safely operate, maintain, and calibrate the general regulator
automatic boiler control systems.
Audiovisual materials, practical exercises, discussion, classroom exercises, laboratory, and lecture. Topics include
operation, maintenance, and calibration of the general regulator automatic boiler control system, including air and fuel
regulation, multi-element feed water and feed pump controls, systems, and component calibration and troubleshooting
procedures.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-1710-0155, Exhibit dates AUG 2001 - APR 2015)
In the lower-division baccalaureate/associate degree category, 2 semester hours in high pressure boiler operation and
maintenance and 2 in automatic controls instrumentation laboratory (8/06)(8/06).
(NAVY TRAINING HISTORY COURSE: A-651-0040)
MILITARY TRAINING:JUL 2001 - AUG 2001
NAVY COURSE: A-651-0046, General Regulator Automatic Boiler Controls Console Operator
LENGTH: 1-2 weeks (54-72 hours)
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-1710-0157, Exhibit dates DEC 1996 - NOV 2011)
Upon completion of the course, the student will be able to operate a general regulator automatic boiler control console.
Methods of instruction include lectures and practical experience in automatic boiler control console operation and
procedures. Topics covered include automatic boiler control, and a typical automatic combustion control system, feed
water control, feed pump differential pressure control, feed pump recirculation controls, and air locks.
_____________________________
_____________________________
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-1710-0157, Exhibit dates DEC 1996 - NOV 2011)
In the lower-division baccalaureate/associate degree category, 1 semester hour in manufacturing technology, or 1 in
mechanical technology, or 1 in engineering technology (7/01)(7/06).
(NAVY TRAINING HISTORY COURSE: A-651-0046)
MILITARY TRAINING:JUN 2001 - JUN 2001
NAVY COURSE: A-651-0116, BW/FW T/T CHELANT SUPERVISOR
LENGTH: 4 Days.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates APR 1993 - APR 2015)
To provide Naval personnel in the Engineering ratings with the knowledge and skills to safely maintain feedwater and
boiler water within prescribed limits, in accordance with Naval Ships Technical Manual Chapter 220, Volume 2. /
Graduates will be certified to test and treat boiler water and feedwater, perform quantitative analysis, interpret and
analyze trends, determine the appropriate actions required for normal and abnormal conditions, and ensure proper
documentation of all actions.
(NAVY TRAINING HISTORY COURSE: A-651-0116)
MILITARY TRAINING:JAN 2000 - JAN 2000
NAVY COURSE: A-651-0019, CHELANT BASIC
LENGTH: 4 Days.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates AUG 1981 - APR 2015)
To provide Naval personnel in the Engineering ratings with the knowledge and skills to safely maintain feedwater and
boiler water within prescribed limits, in accordance with Naval Ships Technical Manual Chapter 220, Volume2. /
Graduates will be certified to test and treat boiler water and feedwater, perform quantitative analysis, interpret and
analyze trends, determine the appropriate actions required for normal and abnormal conditions, and ensure proper
documentation of all actions.
(NAVY TRAINING HISTORY COURSE: A-651-0019)
_____________________________
_____________________________
_____________________________
MILITARY TRAINING:MAY 1999 - MAY 1999
NAVY COURSE: B-322-2320, HEAT STRESS AFLOAT
LENGTH: 1 Day.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates JUN 1955 - APR 2015)
Topics covered include medical aspects and prevention of heat stress, definition of the WBGT index and its use,
calibration and operation of the WBGT meter, heat stress survey techniques, report requirements, and deficiency
abatement procedures. / Provide medical department personnel, heat stress monitors and supervisory personnel
training to conduct the navy's heat stress program per OPNAVINST 5100.20, series.
(NAVY TRAINING HISTORY COURSE: B-322-2320)
MILITARY TRAINING:MAR 1999 - MAR 1999, APR 1998 - APR 1998
NAVY COURSE: J-495-0412, GEN SHBD FF TRNG (OBA)
LENGTH: 1 Day.
COURSE DESCRIPTION FROM SERVICE COURSE FILE:
(Description dates NOV 1969 - APR 2015)
To familiarize officers and enlisted personnel with shipboard fire fighting systems, procedures, and equipment. This
course satisfies the six year live fire fighting requirement. Accession (Boot Camp) live fire fighting also fulfills this six
year requirement.This is a contractor taught course for San Diego. / This course includes proper techniques and
procedures for general shipboard fire fighting. Fires include class Alpha, Bravo, and Charlie fire and fires involving
conventional weapons. The duties of Oxygen Breathing Apparatusmen, Nozzlemen, Hosemen, Plugmen, Accessmen,
and Portable Extinguisher Supplymen are also addressed. The OPNAV damage control proficiency satisfied by this
course is Level II.
(NAVY TRAINING HISTORY COURSE: J-495-0412)
MILITARY TRAINING:NOV 1997 - DEC 1997
NAVY COURSE: A-651-0053, Machinist's Mate, Class A (1200 PSI)
LENGTH: 4 weeks (157 hours)
_____________________________
_____________________________
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-1710-0128, Exhibit dates NOV 1994 - JUN 1999)
Upon completion of the course, the student will be able to identify basic steam propulsion plant components, describe
their operation, and perform basic maintenance on them and perform the duties of engine room shutdown
watchstanders.
Classroom lectures, demonstrations, and performance exercises are used to provide description of the operation of
steam plant equipment and perform basic maintenance and repair.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-1710-0128, Exhibit dates NOV 1994 - JUN 1999)
In the lower-division baccalaureate/associate degree category, 2 semester hours in boiler operation (12/95)(12/95).
(NAVY TRAINING HISTORY COURSE: A-651-0053)
MILITARY TRAINING:OCT 1997 - NOV 1997
NAVY COURSE: A-651-0120, Engineering Mechanical Core
LENGTH: 3-4 weeks (144 hours)
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-1704-0420, Exhibit dates MAR 1994 - AUG 2005)
Upon completion of the course, the student will be able to identify basic propulsion equipment and components, perform
basic maintenance functions on propulsion auxiliary equipment, and safely operate propulsion auxiliary equipment.
Lectures, laboratory training, and practical exercises cover power plant operation and maintenance.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-1704-0420, Exhibit dates MAR 1994 - AUG 2005)
In the lower-division baccalaureate/associate degree category, 2 semester hours in power plant operation and
maintenance (10/95)(3/02).
(NAVY TRAINING HISTORY COURSE: A-651-0120)
MILITARY TRAINING:SEP 1997 - OCT 1997
NAVY COURSE: A-651-0118, Engineering Common Core
LENGTH: 3 weeks (120 hours)
_____________________________
_____________________________
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-0707-0003, Exhibit dates MAR 1994 - SEP 2004)
Upon completion of the course, the student will be able to identify basic engineering auxiliary system components and
procedures and apply principles of general industrial safety.
Lectures, laboratory training, and practical exercises cover power plant components, safety hazards, and safe
engineering practice.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-0707-0003, Exhibit dates MAR 1994 - SEP 2004)
In the lower-division baccalaureate/associate degree category, 2 semester hours in industrial safety (12/95)(12/95).
(NAVY TRAINING HISTORY COURSE: A-651-0118)
MILITARY TRAINING:JUL 1997 - SEP 1997
NAVY COURSE: X-777-7770, Recruit Training
LENGTH: 8-10 weeks (122-169 hours)
COURSE DESCRIPTION FROM AMERICAN COUNCIL ON EDUCATION:
(NV-2202-0165, Exhibit dates JAN 1995 - JUL 2002)
Upon completion of the course, the recruit will demonstrate knowledge of general military and Navy protocol, first aid,
personal health and safety, basic swimming, fire fighting and damage control, seamanship, water survival skills, and will
meet prescribed standards for physical fitness.
Course includes lectures, demonstrations, and performance exercises in military protocol and drill, seamanship, fire
fighting, first aid, safety, health, and physical conditioning.
CREDIT RECOMMENDATION FROM AMERICAN COUNCIL ON EDUCATION
(NV-2202-0165, Exhibit dates JAN 1995 - JUL 2002)
In the lower-division baccalaureate/associate degree category, 1 semester hour in personal fitness/conditioning, 1 in
personal community health, and 1 in first aid and safety (3/92)(8/99).
(NAVY TRAINING HISTORY COURSE: X-777-7770)
** Note: Limited training history is available prior to FY 84 (ARMY); FY 78 (NAVY); FY 70 (AIR FORCE); FY 67 (MARINE CORPS)
_____________________________
END OF AUTOMATED MILITARY EXPERIENCE AND TRAINING HISTORY DATA
** Note: This history includes only the centrally automated experience and training information that the services maintained on yourmilitary record **
LEGEND CODE:
DOT: Dictionary of Occupational Titles published by the Department of LaborOES: Occupational Employment Statistics published by the Office of Personnel ManagementONET: Occupational Information Network
DD FORM 2586, JAN 2010 PREVIOUS EDITION IS OBSOLETE