VM to Crack WEP Encryption

7/29/2019 VM to Crack WEP Encryption

1/17

Introduction for VM to crack WEP encryption Install VMware Workstation

1Open the icon then you will see a picture as follows

2Click you will see


2/17

3Choose Typical,then click , you will see

4Change the destionation folder you want , then click you will see

5Choose all of them , then click you will see


3/17

6Click , you will see

7Open you will see


4/17

8Copy the ,then fill it in the blank of Serial Number

9Click


5/17

10Click ,If it installs successfully, you will see

11.Click , then all is ok

VMware Workstation settings

1After install the VM successfully, open the icon in you desktop:


6/17

2Choose yes, then click

3Click ,then you will see


7/17

4Open ,it means you creat a new VM.

5Click ,


8/17

6Choose Typical,then click

7 Choose LINUX,NOTE: the Version you should choose other linux 2.6.x kernel,then click


9/17

8Choose the Location you want,then click :

9Choose ,then click


10/17

10.Click , then click as follows,the VM creates successfully.

12.Open ,then choose ,and find the the document beini.ISO, click

13. Click the green button then it appears picutre as follows


11/17

14: Click starting the beini.iso document of VM.

Using the VM to crack1Open Beini, it will appear a picture, then you see many options, and we choosethe first one which is default. ( wait about one minute, and you will enter itsucussefully.

Notice:when you launch the VM, you should connect wireless adapterand chooseVM-Removable Devices-USB Devices-Realtek USB Devicesas follows, (if youcannot grap data when cracking , then you must forget this step) When you seea hook in Realtek USB Devices, it means it connects the wireless adapter, if not,you shall connect it again.


12/17

Then, it starts cracking

( Entering Beini interface )

2Double click you will see :

Click you will see :


13/17

3Click Scan button, which it is scanning wireless network, then you willsee:

4Choose AP that you want to crack ( In client column , the higher power datais , the better singal will be. It also will be more easy to crack the code) thenclick lauch , it begains cracking.


14/17

Hex key:3510106446 This is key (Notice: the time that we need to crack the code

depends on data. When data arrives about twenty thousand or beyond this data the

password will appear. If the data do not grow in this period, it means the packet is very

small, so it may can not crack it, then pls change AP to crack )

Remarks: If need to crack WPA or WPA 2, you can choose WPA in Encrption option, the

picture as follows:

Click Scanbutton, then it will appear AP, choose the AP you want to crack.Finally, click Lanchbutton, it begins cracking. (Generally speaking,theencryption of WPA and WPA 2 is not very easy to crack ,especially for complicatdencryption that may be digital, or composed of digitaland letter , or composed


15/17

of digital , letter and specific symbol. For some simple encrytiopn, it will beok.

Enjoying net

Firstly, click crab icon, open driver software, then click Available

network , and double click SSIDwhich you have cracked.


16/17

Secondly, in the netwrk key column, you shall input the key , and click ok

Thirdly, click general , you could see the quality and strength of signal. If IP address or

Gateway is empty, pls click ReNew IP button until you get IP. ( you can also try to

remove the wireless adapter , plug it again, and restart procedure)


17/17

VM to Crack WEP Encryption

Documents

Transcript of VM to Crack WEP Encryption